Search Results

Search found 21441 results on 858 pages for 'internet man'.

Page 435/858 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• Chain Gateways on the LAN

  - by Black2night

  I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

  Read the article

• samsung pc studio not install on ubuntu

  - by subhash

  i want to install samsung pc studio for make a internet connection via GPRS on ubuntu 9.10 but without this software it is not possible so give me suggestion

  Read the article

• How do I get around "Access is Denied" [Number: 5 (0x80070005)], with IIS6/FastCGI and PHP 5.2.3?

  - by Evan Carroll

  I'm getting this error with IIS 6.0 (i assume), and PHP 5.2.3, and FastCGI FastCGI Error The FastCGI Handler was unable to process the request. Error Details: Error Number: 5 (0x80070005). Error Description: Access is denied. HTTP Error 500 - Server Error. Internet Information Services (IIS) Any ideas, nothing revealings in logs (other than 500 errors), this is pretty much all of I have to work with. The script has read and execute privileged for the internet guest account; and, I've added read/execute privileges to the whole D:\PHP. I followed this tutorial http://learn.iis.net/page.aspx/247/using-fastcgi-to-host-php-applications-on-iis-60/ to set it up. The only major diversion is I installed PHP to D:\PHP

  Read the article

• Reasonable size for "filesystem reserved blocks" for non-OS disks?

  - by j-g-faustus

  When creating a file system ( mkfs ...) the file system reserves 5% of the space for its own use because, according to man tune2fs: Reserving some number of filesystem blocks for use by privileged processes is done to avoid filesystem fragmentation, and to allow system daemons, such as syslogd(8), to continue to function correctly after non-privileged processes are prevented from writing to the filesystem. But with large drives 5% is quite a lot of space. I have 4x1.5 TB drives for data storage (the OS runs on a separate disk), so the default setting would reserve 300 GB, which is an order of magnitude more than the the entire OS drive. The reserved space can be tweaked, but what is a reasonable size for a data disk? Can I set it to zero, or could that lead to issues with fragmentation?

  Read the article

• So Pretty [Halloween Horror Short Film]

  - by Asian Angel

  A young woman riding the train at night becomes involved in an interesting conversation with a young man about vampires. She thinks vampires are mysterious and misunderstood, but will she still feel the same way by the time the train ride is over? The Continuum: Halloween Short Film – “So Pretty” [via Neatorama] 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

  Read the article

• How do you have one IP address and many websites?

  - by johnny

  Hi, How can I have it where I have one IP address that sits on the Internet but many web names? For example, when a hosting company has a shared IP but I get unlimited domain names (along with everyone else on that box). I have a box on the Internet but I want to point to another machine that holds a different website when someone types in the different www...(it's sitting right next to it in just a different box). Is that all subdomaining? Thank you. EDIT: I am the hosting company.

  Read the article

• Where does Outlook 2007 store opened attachments temporarily?

  - by pelms

  If a 'friend' has double-clicked an Excel attachment from an Outlook 2007 email and worked on it, saved it and then closed Excel and the email, where would that file be lurking (assuming I haven't exited Outlook? I seem to remember Outlook 2003 putting stuff in %username%\Local Setings\Temporary Internet Files in OLK prefixed folders, but no sign of anything relevant looking in there. I'm he's on Windows XP. Update Temporary folder eventually found in: C:\Documents and Settings\username\Local Settings\Temporary Internet Files\Content.Outlook but need to navigate directly to this folder via pasting into 'Run...' dialog or Explorer to see it. Unfortunately, Outlook deletes the attchment when you close the email.

  Read the article

• Any website/software where I can add some text rows on daily basis

  - by Moorage

  I have few notes or text like few remembering lines on daily or weekly basis. I want to write it. but i should be able to see at any backdate /monthly or yearly. The date-time should also be stored when i enter text. is it possible EDIT: I will explain clearly what i exactly want. Suppose while working on internet 1)i find "ABC is good for BCD". now i want to add that text to some online site where i can see later 2)Now i can add those type of things any time and on internet i can see that in tabular form like click to see montly list , yearly or weekly 3)Other thing is i should be able to add text as easy as possible like in firefox if i can press some shotcut and enter something and it gets added there rather than opening the site and then write The to do list do that sort of thing but they dont have creation date , rather they filter based on due date.

  Read the article

• Choosing the right version control system for .NET projects [closed]

  - by madxpol

  I'm getting ready for my first "bigger" .NET project (ASP.NET MVC 3/4) on which I'm going to lead another 2 programmers and right now I'm choosing the right version control system for the job (plus I'm gonna use it for my future development too). My problem is that I did't use any version control system before, so I would like it to have as fast learning curve and intuitive merging as possible. So far I quickly looked at VisualSVN (I like the Visual Studio integration in it), but I'm reading everywhere how Git is awesome and dunno which one to choose (not limited to these two).. Maybe I'm ovethinking this but I like when everything goes smoothly:) I'd like to hear some opinions from people who used multiple version control systems (preferably on VS projects) what do you think is the less complicated and effective version control system for such a use (one to 5 man projects)?

  Read the article

• Is it really a security problem to have non secure assets on an ssl page?

  - by blockhead

  My understanding is that this is just an example of being overly cautious, but if my checkout form contains an unsecure asset on it, that doesn't endanger anybody's credit card numbers from being caught by a man-in-the-middle. I'm asking this because every once in while, maybe because of cached content or whatnot, somebody writes in saying that they are seeing this "error" (even though there are no unsecure assets on my page), but they want an explanation. So yes, I can tell all about encryption and certificates and trust and men-in-the-middle. But what do I tell them about this. How do I convince them that the site is 100% safe (and if it isn't let me know that I'm mistaken!)

  Read the article

• Wifi randomly drops on Windows 8 laptop

  - by JosiahS

  First of all, I did a lot of research on this problem, and I wasn't able to come to any helpful conclusion. I've finally decided that I need advice from those who might know where to look. So don't let me down. :P I used to have an older Windows 7 laptop, which worked great for basic office and web browsing. However, I wanted something that would play actual modern games. So I recently bought a Sager NP8235 with the Intel Wireless-AC 7260 wifi card, and installed Windows 8 Pro on it. And ever since, I've been having problems with the wifi. Generally, what happens is if I leave the laptop on but inactive for an extended amount of time (I've estimated it around an hour to two), the wifi will start dropping randomly. If I happened to have a download going at the time, it usually causes the download to fail. Or, if I put the laptop to sleep overnight, the next morning I usually have to restart the computer because the wifi device apparently stops working (it literally won't turn on). Also, and most frustrating, whenever I'm on a video chat (like Skype), after about ten minutes, the connection will start lagging like crazy, until it forces Skype to end the call. After that, I usually have to disable and reenable the wifi to get it working again. I know it isn't our internet, because all the other computers in our house (~8) don't have any issues. Even the old Windows 7 laptop (connected also over wifi) works just fine, scoring the normal ~3Mbps average on speedtest.net (yes, I know our internet is slow, we live out in the country). Additionally, when I connect the Sager directly to the router via ethernet, the internet instantly starts working just great. Like I said, I've done a lot of googling to figure out what's going on, and I haven't been able to find anything that worked for me. Is it Windows 8 conflicting with the Wifi drivers? As of this writing, I have the Intel drivers v16.1.5.2 installed (without the extra Intel software). Or is it our router? It's a TP-Link TL-WR841ND, set to the default settings. The Sager is currently being assigned to a static IP, if that makes any difference. And yet, the old windows 7 laptop has a much more stable connection than the Sager. Anyone have any ideas? At this point, I'd appreciate even knowing what the problem is.

  Read the article

• Time out while mounting samba share

  - by nullDev

  I am trying to mount a hard-disk connected to my WDTV Live box. The following command smbclient -L 192.168.1.2 -U guest gives the following output: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1] Sharename Type Comment --------- ---- ------- Expansion_Drive Disk Expansion_Drive MICROVAULT Disk MICROVAULT IPC$ IPC IPC Service (WDTV LIVE) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1] Server Comment --------- ------- WDTVLIVE WDTV LIVE Workgroup Master --------- ------- WORKGROUP But if I try sudo smbmount //WDTVLIVE/Expansion_Drive /home/ashish/wdtvlive/ -o guest,rw I get the following: Warning: mapping 'guest' to 'guest,sec=none' mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I am able to browse and mount through Nautilus as well, but I dont want the drive to be mounted at gvfs.

  Read the article

• Disk Utility Restore causes "Could not validate resource - Invalid Argument"

  - by Yahoo

  I have a problem with Disk Utility on Mac OS X 10.6. I have an image of Windows that I would like to use as a bootable volume on a pen drive or external hard drive. The thing is: When I try to restore the volume from the image I get an error: "Restore Failure: Could not validate resource - Invalid Argument" I read some information about that error on the Internet. I converted the image into .iso (Mac OS Extended/ISO (Joliet) Hybrid Image) format and then got this error: "Restore Failure: Could not find any scan information. The source image needs to be imagescanned before it can be restored." When I try to scan the image for Restore, I get the first message. I really read a lot of information about this topic on the Internet, but I haven't found the solution. I tried both ISO and DMG formats; I don't know which is best.

  Read the article

• unreachable subnet in one direction

  - by Carl Michaud

  I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

  Read the article

• Horse Drawn Fiber Optics Bring Broadband to Remote Areas

  - by Jason Fitzpatrick

  When you think of fiber optics and high speed internet the last thing you likely think of is… horses. Yet horses have been put to use rolling out fiber optics to remote rural locations. In Vermont a Belgium draft horse named Fred, seen in the photo above being tended by his handler Claude, is a distinctly 19th century solution to a 21st century problem; how to run fiber optic cable through remote areas where trucks cannot easily pass. The man and animal are indispensable to cable and phone-service provider FairPoint Communications because they easily can access hard-to-reach job sites along country roads, which bulky utility trucks often cannot. “It just saves so much work – it would take probably 15 guys to do what Fred and Claude can do,” said Paul Clancy, foreman of a line crew from FairPoint. “They can pull 5,000 feet of cable with no sweat.” You can read more about the use of draft horses to draw lines and the roll out of broadband to rural Vermont at the link below. Vermont Uses Draft Horse to Lay Cables for Internet Access [Reuters] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

  Read the article

• it started with a broken package

  - by Inteloidl.com

  all started when i tried to updated to the latest lts, but the problen is that the update interumpted and some broken packages apeared, i used synaptics to repair, but it wont repair, iv tried some console from some forum topic ... and in the end when i try to open synaptic or update managre this is what apears any ideas : E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf) E: Error occurred while processing mantis (NewVersion1) E: Problem with MergeList /var/lib/apt/lists/c.archive.ubuntu.com_ubuntu_dists_lucid_universe_binary-i386_Packages E: The package lists or status file could not be parsed or opened. E: _cache-open() failed, please report. W: Unable to munmap

  Read the article

• career change : non-functional to test automation

  - by centennial

  I started my Career as core-Java developer 6 years ago and stayed as developer for 6-7 month and then moved to performance testing (actualy pushed into this for short term and later I started liking it). I have done all sort of non-functional testing like performance, load, stress, soak, compatibility, failover etc on many performance test tools accross many industries. I was doing contracting all these years which means I kept moving to new projects after every 3-6 months. Now personal situation has been changed, married man now so looking for something long term. Performance testing generally comes at the end of the development life cycle hence very short term contracts so I was wondering if I can move into functional/test automation side I can earn myself good length of contract. I had some exposure of QTP but I am sure to learn all other tools very quickly as I am quite good in programming and concept of testing. in short I want to move into functional test automation to get long term contract without leaving my love for programming . any thoughts please ?

  Read the article

• Downloading content greater than 2000 bytes from local network hangs in browser on Windows XP

  - by artplastika

  We have web application that runs under Tomcat in a local network. Our customers experience strange problem using this web application. Let's say Tomcat server runs on host1 and we open webapp URL in browser on host2. Any browser on host 2 starts opening page and downloading of content "hangs" for hours. We've made bunch of experiments and found that any content larger than 2000 bytes makes browser request hang. Tried in Internet Explorer 8, Opera 12, Firefox. At the same time if user opens website from internet, it works. Opening webapp from the same host1 where Tomcat is running works normally. Local network is organized with D-Link DGS-3120-48TC switch. Additional info. During experiments we've noticed XP Tweaker installed on hosts. Network settings from that tool: MTU is manually set to 1500 RWIN = 14600 Support of TCP frames larger than 64 KB is on Time to Live = 32 SACK is on

  Read the article

• Android tethering via bluetooth keeps disconnecting

  - by Ian

  I'm currently using a Google Nexus tablet tethered via Bluetooth to a Samsung S3 for internet. Two things are annoying me. First, if I take the phone away from the tablet (go out for lunch), the tablet disconnects and has to be manually reconnected. Is there a way to have that happen automatically? Second, Bluetooth tethering, i.e. the internet sharing part needs to be switched on each time the bluetooth is switched on (or perhaps just after power cycling) on the S3. Is there no way to have that default to on? Thanks

  Read the article

• Do two portforward rules translate to "and"?

  - by blsub6

  I just set up an Exchange server to replace my DeskNow mail server. I want to start testing my internet mail exchange of my Exchange server. I can only set the MX records on my DNS up to my one external IP address so I was thinking that I could set up a firewall rule on my internet-facing firewall that port forwarded the smtp packets to two different servers. My question is: If I do that, will that mean that the smtp packets will be forwarded to just the first internal IP on the list? Or does it mean that the packet will be cloned and sent to both IPs?

  Read the article

• Creating a portfolio of projects [closed]

  - by Ryan

  As I pursue the path of becoming a programmer, I would like to build up a portfolio of projects I worked on at my current job so that I can eventually get programming work elsewhere (either as an employee, contractor, one man consulting shop, etc). Some of these were things I coded myself, others I was instrumental in the architecture, design and functionality (ie, not as a programmer but more of a BA). How do I show the work that I have done to others on the projects that I have produced for the company I work at? This is all internal software, so it's not something that the outside world would be able to use, and some of our products contain proprietary financial market tools and it would not be prudent to share those with the outside world. My guess is that screenshots would definitely be out of the question, as well as functional descriptions of the software.

  Read the article

• Disable Thunderbird "failed to connect" notifications

  - by The Electric Muffin

  My network manager doesn't start until I log in, so for the first ten seconds or so after I login I have no Internet connection. The problem is that I have Thunderbird set to automatically start on login, so it helpfully tells me it "failed to connect" every time I log in. Also, my Internet connection isn't too reliable, so I sometimes get those messages even when I'm supposedly connected. Is there any way to disable these notifications, while still allowing the ones about new mail? Computer info: Thunderbird 15.0 $ uname -a Linux [HOSTNAME REDACTED] 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Probably irrelevant: NetworkManager Version 0.9.0.1 (nm09 20120407) KDE Platform Version 4.8.4 (4.8.4)

  Read the article

• How to schedule time-of-day upgrades

  - by Richard

  Hello, I'm responsible for about 30 Ubuntu computers at a private K-8 school. We have only a 3Mbps internet connection serving the entire campus, and I would like to ensure that updates are done in the middle of the night - so that daytime tasks are not slowed down. I'm using Ubuntu 10.04, and have set all computers to download and install security updates via the update manager. I have also installed cron-apt, and modified the config file to stagger the start times of the upgrades from about 10pm to 4am local time. HOWEVER - this morning I arrived at the school at 7:30am and all the computers were busy downloading a large security based update. Needless to say, all internet activity was slowed to a crawl (for the next 2 hours), and the computer users were very very upset. This was the event I'm trying so hard to prevent. It seems that my scheme to ensure middle of the night downloads failed, and I'm not sure why. I've also tried some schemes using unattended-upgrades & crontab, but there always seemed to be something scheduling upgrades to occur in addition to the ones I try to force at middle of the night. Is there a sure fire way to absolutely positively guarantee that updates will occur only at one specific time? It would be nice if the update manager just had a drop down menu to specify a designated time. Thanks in advance for any help you can give me.

  Read the article

• Primary/secondary ethernet interfaces via NetworkManager in Ubuntu 9.10

  - by Josh

  I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local... EDIT: Here's my routing table: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 172.16.151.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 172.16.30.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.1.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 172.16.30.2 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.0.1 0.0.0.0 UG 0 0 0 eth1 I want the 172.16.30.2 network to be the primary one and the 10.1.0.0 network to be the secondary one. EDIT2: My nameservers are also incorrect. It seems like Ubuntu is bringing the networks up in order, eth0, then 1, then 2, and the DHCP information from eth1 is overriding eth0, and eth2 is overriding eth1. How can I reverse this so the DHCP information from eth0 is the "master"? EDIT3: This seems to be an issue with Gnome's NetworkManager.

  Read the article

• Lightweight, low cost enterprise backup solution

  - by Scott

  Looking for a backup solution primarily for Windows clients (XP/7), that will either back up to 2 different servers (1 on site, 1 off site - internet - can be our own server), or back up to 1 server and then we would need to somehow backup that server offsite/internet. By lightweight, I mean the backup client software should not eat up much memory and processor since some of the client machines are older. I am used to using Crashplan for home use - the pricing is nice for the amount of backup I get, and it works great / easy to install and get going - I can back up to my own machines locally and over the net. However, the price is going to be a little steep for enterprise level backup, 1500+ machines. Possibly ZManda and Bacula are good choices to consider? Are they light weight? Can the clients/agents be set to go over the net and/or multiple backup servers?

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >