Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 440/607 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

• Super-silent (mid tower) case and fan combo

  - by Dennis G.

  I want to build a HTPC for music/video/blu-ray playback (no gaming). I don't need an expensive HTPC case but just want to go with a standard medium tower case. However, I want it to be super silent so it doesn't make any annoying fan/disk noises when I watch movies. Ideally, it shouldn't make any noticeable noise at all. I understand that choosing a board, CPU and graphic card that run cool and don't consume a lot of power is important for designing a quiet machine, and I think I got that covered. However, there are so many choices in regards to cases, fans and power supplies that it's hard to get started. What are your recommendations for a case/fan (cpu+case)/power supply combination that run absolutely silent and can cool a standard Intel system with a low-power (possibly passively cooled) graphic card? I'm usually a fan of Antec cases, would an Antec Mini P180 be a good starting point? If so, which case fans, CPU fan and power supply would you recommend?

  Read the article

• Slow old notebook Hardy => Karmic

  - by Mailo

  Hi, i have one very slow notebook from year about 2000. On the computer is running icewm with firefox (in this times chromium for testing). My question is if it's good step to upgrade the system to Karmic Koala? I can't install another OS on that. It doesn't have CD-ROM, it can't boot from flash, or network. The new wanted state is little bit faster system for browsing web and copying photos to local NAS. I don't mention hardware configuration, becouse it's real speed is really deep below the paper parameters.

  Read the article

• Hibernate a user account when switching to different account in Windows 7 Home Premium (64bit)

  - by Sukotto

  Is there any way to have Windows 7 hibernate Bob's account when switched to Mary's account and vice versa? I.e.: Bob is logged in Bob clicks Start shutdown switch user Bob's session is saved to disk Mary logs in Mary's session is restored as it was when Bob's turn started Both are heavy users (30+ chrome tabs open, multiple documents, multiple spreadsheets, music playing, etc) I would like to set up the system so that each gets the full use of the computer while still having all their open apps the way they left them. I suppose I could try setting up a VM for each, but I'd rather not add anything else to the mix here if I don't have to. This is Windows 7 Home Premium 64-bit running on a Lenovo G550 laptop

  Read the article

• Sharing an external hard drive in Ubuntu using Samba

  - by cambraca

  /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• Problems with Xen installation

  - by Rodnower

  Hello, I have CentOS 5.4 installed. Now I'm trying to install Xen with out connecting to Internet (I have any driver for modem, so I search on Inernet only from Windows). All I have are 7 installation disks. First I done was to find kind of some add/remove programs wizard but it needed connection to Inernet. Second I try was to find Xen rpm on all disks and install it. But I fell on some dependency of some dependency. Third I attempted was to boot from first disk and do upgrade, but also it was unsuccessfully... So my question is: is there some way to install Xen from CentOS installation disks with out network? Thank you for ahead.

  Read the article

• Set-and-forget Windows backup software with NAS-support?

  - by Evert

  Hi all, I am looking for set-and-forget backup software for Windows (Vista & 7, and if possible XP/2003). The idea is that it runs in the background on the clients, and does its thing towards a network-share. In case the HDD of one of these clients spontaneously combusts, all I want to have to do is: replace the drive, insert a USB-stick, boot from it, and restore the machine. It should support drives which use [ICH]-RAID. What are my options here? It looks like WHS meets all the requirements, but I am curious about my other options here.

  Read the article

• How do you add more space to a Fedora (LVM) partition?

  - by Trevor Boyd Smith

  In a nutshell, i have a VM that ran out of space. I increased the size of the VM's harddrive to be 4 times bigger but the OS partition is still only using 1x the space. I need to change the LVM partition to take up the extra 4x space but I don't know how to extend the LVM partition. (NOTE: To make the screenshots given below I had to boot from a live-cd for gnome-partition-manager (aka gparted). Very unfortunately gparted is only able to "detect LVM" and can't do any LVM operations.) Here is what "gparted" shows. Please notice that the "resize" option is not available: The Problem: I can't find good directions<1 on how to grow the LVM partition via GUI or command-line! How do you grow a LVM partition that was created by the default Fedora install? If you are giving command line directions. Please explain what each line of commands does.

  Read the article

• How to download Firefox extensions from addons.mozilla.org without installing them?

  - by kjo

  Pages at the https://addons.mozilla.org/en-US/firefox site often feature buttons that say "Add to Firefox". Clicking on such a button causes a Firefox extension to be downloaded and installed. I am looking for a convenient way to limit this action to the download step only, so that in the end I am left with the downloaded *.xpi file in my disk. Thanks! P.S. The following approach is not only inconvenient: it doesn't work!. Inspect the HTML for the button, and extract a URL like https://addons.mozilla.org/firefox/downloads/latest/1234/addon-1234-latest.xpi?src=search give or take the stuff after .xpi. at the command-line prompt, download this URL with wget or curl. This download attempt just hangs. (Even if it didn't, I'd like to find a less cumbersome approach.)

  Read the article

• Fedora12 Slow USB 2.0 Write Speed, ehci_hcd module is missing

  - by MA1

  I am using Fedora 12, the problem I am facing is USB 2.0 write speed. I have a dual boot system with Windows XP and Fedora 12. USB 2.0 write speed in Windows XP is much faster then what I am getting in Fedora 12. After searching Google I came to know that ehci_hcd module is missing/not present in my system. ehci_hcd module is neither loaded nor it is present in the available list of modules. Can someone guide me how to fix this issue? Does ehci_hcd have something to do with USB 2.0 write speed? Do I have to recompile the kernel and add/enable the ehci_hcd module?

  Read the article

• How can I make pref changes via defaults command happen immediately?

  - by user329863

  There are many changes to Finder, Dock, etc. preferences that you can do with the defaults command, i.e. defaults write com.apple.finder AppleShowAllFiles -bool yes However, in order to make the changes take effect, you must quit and relaunch the target app: osascript -e 'tell app "Finder" to quit' When the Finder is quit like this (rather than using the killall command, as some published sources advise), it saves and restores its window placements and disk locations (but not the forward-and-back history associated with each window). Is there some way to make such changes take effect immediately, without quitting the target app? After all, when you make changes in the Dock preference panel, they take effect instantly in the Dock application. Is there some Apple Event that I can send to make the change or make the app reread its prefs?

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Windows 8 cloned drive in 2nd computer

  - by Mark

  I did the Windows 8 Pro upgrade machine w/ 64GB SSD. Finding 64GB not enough, I ordered a 128 GB SSD (Samsung 830) while planning to use CloneZilla to clone the Windows 8 OS to it. I might try using the 64GB SSD (with the Windows 8 upgrade on it) as a boot drive in a backup machine. I understand that I need to do some registry work to make it happy about the SSD 'transplant,' but I am worried about having to register the same activation key on 2 computers. Am I at high risk of getting 'deactivated'? Note that the backup machine is only used when primary computer is off.

  Read the article

• Web clipping / note taking software on Linux

  - by bguiz

  Hi, I use this great web-clipping and note taking app called Evernote on my Windows machine. However, there's no Linux version of Evernote (doesn't work properly in Wine). I would like to get some suggestions for something with similar capabilities that runs on Linux/Ubuntu. Specifically I need to be able to select parts of a web page in Firefox, and press some key combination, to save that clip to disk, in some sort of searchable database The clip needs to have pictures and basic text formatting, anything extra is unnecessary I also need to be able to create empty note or edit existing one. Storing the notes on a local machine only is fine - I don't need the sync features of Evernote

  Read the article

• How does Amarok rip Audio CDs (in Ubuntu Lucid)?

  - by Hanno Fietz

  I'm in the process of moving my CD collection into my Amarok library. Mostly, it works great. Sometimes however, the process just hangs forever. The problem seems to occur at random (i. e. often, but not always at the same disk/track) and the consequences range from none (successful after cancel/retry) to Amarok's internal db becoming completely messed up. I would like to investigate and file a proper bug report or find a fix / workaround, but I don't understand how Amarok does the ripping. When all is working, there's a lame process encoding to a temporary file, which appears in my collection once it's finished. When the process hangs, that lame command is still there, but waiting forever for data on stdin, which seems to come from a third process. That seems to be kio_audiocd, but I don't know whether that's correct and what it's supposed to do. What's going on?

  Read the article

• Virtual box - How to add disks and move var, opt and home to them?

  - by Jarrod Roberson

  I created a CentOS 5.6 Guest OS Virtual Machine. I made the first disk 10GB, I am rapidly outgrowing it. It was suggested that I make disks for my /var, /opt and /home directories and move them so I can better manage the disks for backing up and what not. This sounds like a good idea. I know how to create the disks in Virtual Box. I have dug around Google and the internet in general and all my attempts at doing this have failed. Snapshots are awesome! I can get the drives fdisked, and I have had limited success mounting them to /mnt/var, /mnt/home and /mnt/opt, but even in single user mode ( init 1 ) I can't get the entire contents of the directories to move over, and then the machine won't reboot correctly. cd /var cp * -ax /mnt/var The /var directory in particular is not wanting to move everything to the new location. How do I format, mount and move the /var, /opt and /home to my new disks?

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• Using the link command to keep backups on another drive

  - by Xavier

  I have a folder that contains a not so large amount of space called /data/backup. I have been told that if I link that folder (/data/backup) to an even bigger folder area like /bigdata/backup for example, that I will be able to execute backups to the /data/backup folder. It will then just create a link, but the data will be seen in both folders and the latter one (/bigdata/backup) will contain the backup results but it will show on both folders. Since the /bigdata/backup has far more disk space then the backup will no longer fail because of space problems in the /data/backup one. Is this true?

  Read the article

• Netboot Debian (wheezy) from NFS v4

  - by bara

  Is it possible to boot Debian Wheezy from NFS v4? Bootwing with NFS v3 works just fine. NFS v4 not. This is in my /etc/exports: /nfs 192.168.100.0/24(ro,sync,insecure,no_root_squash,no_subtree_check,fsid=0) /nfs/root 192.168.100.0/24(ro,nohide,sync,insecure,no_root_squash,no_subtree_check) /nfs/root/www contains the root of the webserver. The commandline is: rootfstype=nfs4 root=/dev/nfs4 nfsroot=192.168.100.1:/root/www fails with mount call failed - server replied: Permission denied. Mounting from the busybox in the initrd fails: mount -t nfs4 192.168.100.1:/nfs/root/www /root mounting .. failed: Invalid argument Do I need to modify the initrd?

  Read the article

• Guaranteeing ACID properties for InnoDB databases.

  - by plinehan

  What steps must one take to ensure that an otherwise defaultly-configured InnoDB server is truly ACID compliant? The InnoDB configuration page mentions that the hardware itself must be configured to honor fsync calls, i.e. disable any write-back caches. This page mentions some other concerns, but may be conflating the binary log and the InnoDB log, and may be a bit out of date regarding default settings for MySQL 5.x. Upon reading the binary log document page it would seem that the "sync_binlog=1" setting is not required for ACID properties in general, only for ACID properties vis a vis point-in-time recovery and replication. So, is disabling write-back disk caching sufficient, or are there other settings that must be tweaked?

  Read the article

• Help creating image from LVM

  - by jackhab

  I need to duplicate CentOS hard drive image for multiple stations. The HD has the following layout: Disk /dev/sdb: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 250GB 250GB primary lvm I saved /dev/sdb1 to file with fsarchiver but for sdb2 I get: /fsarchiver savefs an2.fsa /dev/sdb2 oper_save.c#1006,filesystem_mount_partition(): can't detect and mount filesystem of partition [/dev/sdb2], cannot continue. removed an2.fsa Although fsarchiver probe simple correctly detects sdb2 as LVM2_member. Is fsarchiver correct tool for this job? What's wrong? I'm on Ubuntu 9.1 with fsarchiver 0.6.8 and lvm tools installed. Thanks.

  Read the article

• Help creating image from LVM

  - by jackhab

  I need to duplicate CentOS hard drive image for multiple stations. The HD has the following layout: Disk /dev/sdb: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 250GB 250GB primary lvm I saved /dev/sdb1 to file with fsarchiver but for sdb2 I get: /fsarchiver savefs an2.fsa /dev/sdb2 oper_save.c#1006,filesystem_mount_partition(): can't detect and mount filesystem of partition [/dev/sdb2], cannot continue. removed an2.fsa Although fsarchiver probe simple correctly detects sdb2 as LVM2_member. Is fsarchiver correct tool for this job? What's wrong? I'm on Ubuntu 9.1 with fsarchiver 0.6.8 and lvm tools installed. Thanks.

  Read the article

• Change Drobo directory permissions

  - by Steven Scott

  I have a Drobo unit that is connected via fire-wire to a Dell notebook. Using Ubuntu 12.04. I can not seem to change the permissions to allow all users to have read/write access to the drives. The unit is automatically mounting the volumes as my user using the system, so other applications can not access the device. I want to set up a Plex Media Server to stream music, etc... but it will not scan the drives since it can not access them. How can I change the permissions to allow everyone to read the volumes? IF I add them to the fstab as ntfs volumes, Ubuntu reports that they are not available during the boot up, likely due to the fire-wire not having found the drives yet. Any ideas or suggestions would be greatly appreciated.

  Read the article

• Recommendations for USB flash drive fast at writing small files

  - by Andrew Bainbridge

  I want a drive that I can be used as my work drive, storing a Subversion repo and sandbox for a small project. I'd also like it to be able to store a DVD rip. At the moment I've got a Super Talent pico-C 8gb. It's fast at reading and writing DVD rips, but the performance on small files (ie less than 4k) is utterly terrible (we're talking floppy disk speeds here). This Ars review measured a similar Super Talent drive and pretty much confirmed my measurements (take a look at the random write speeds on page 5). So, I'm looking for a 8gb or bigger drive that doesn't suck at read and write of small files and still has acceptable performance for very large files.

  Read the article

• The laptop screen goes black after 6 seconds. What can I do?

  - by Riduidel

  I was given a Dell Latitude D-610 today that have a strange display problem : when the computer boot, screen goes black after 6 seconds (delay after which I can still see images, provided light is at the right angle). When such a thing happen, I can get an image again by simply closing the laptop and opening it again. So. What can I do to have the screen working again? opening it and finding in the cable mess which one is responsible for the neon to turn off? considering it lost and cannibalize its parts?

  Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >