Search Results

Search found 21184 results on 848 pages for 'cable internet'.

Page 444/848 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

  • What type of wireless adapter for Verizon Fios?

    - by ShoeLace1291
    I have verizon fios internet service. I believe they use a Wireless G router, but I just have one question. I currently am using a 54mbps wireless pci adapter in my Windows 7 custom build. It drops the internet connection all the time and is starting to get very irritating. I'm thinking about buying a new one, but all the 300mbps cards on newegg are wireless n. So my question is, will a wireless n network adapter make a difference with a wireless g router?

    Read the article

  • Why can't I connect to a wifi network with my laptop, when I can with my phone?

    - by Alex Sf.
    I can connect with my phone and use the browser as usual. On my laptop it won't connect when using windows 7 while in ubuntu it will connect, but with no internet. What is going on here and how can I get internet on my laptop ? [edit] It's a public wifi hotspot. I can connect with no issues at home. My network asapter is: Atheros AR5B97. And my phone is an iPhone 3G. The wizard's of no help since it asks me to check the router, which I can't since it's a public hostspot.

    Read the article

  • Wireless Not Working with Drivers Installed

    - by Haoran
    I'm new to Linux. I installed Ubuntu 12.10 on my old Compaq/Hp Preario V3000 to replace Windows XP. Every thing works fine except I'm getting no wireless network options in the network drop down menu. I'm using a cable at the moment. Wirless chipset is: 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 08:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02) I ran rfkill: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no I also ran iwconfig and got this lo no wireless extensions. eth0 no wireless extensions. In the additional drivers it says: "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary)" Any help to resolve the problem would be greatly appreciated.

    Read the article

  • USB printer doesn't finish in 12.04

    - by 213441265152351
    I have an HP Deskjet 720C connected through a USB cable to an Ubuntu 12.04 laptop. When I plugged the printer for the first time into the fresh 12.04 laptop install, it auto-detected the printer correctly and choose the recommended drivers without a problem. The document print fine until they reach the end of the page, then suddenly stop just about the end leaving the page unfinished. I have checked that the margins are the correct ones. I have the latest version of cups installed. I have also tried changing the options of usb-unidir-default and usb-no-reattach-default via lpadmin, but the printing stops even earlier. Any ideas?

    Read the article

  • Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

    - by Bjørnar Kibsgaard
    I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

    Read the article

  • Ubuntu 12.04 Transparent proxy gateway

    - by user146536
    i have a ubuntu server which i want to use as a transparent proxy, (i have no issue setting up squid, just the iptables. The server only has one network interface. The server sits on the same subnet as the router which is the current gateway to the internet for clients, i want to simply set the gateway on the clients pointing at the transparent proxy which in turn forwards the requests to the router and off to the internet. See me diagram, can anybody offer to help with the iptables configuration to achieve this scenario? subnet mask /22 Router(10.4.12.1) Transparent Proxy (eth0, 10.4.12.2) | | +----+----+---------+----+----+ | | | | Comp1(10.4.12.6) Comp2(10.4.12.5) Comp3(10.4.12.4) Comp4(10.4.12.3) Thanks

    Read the article

  • Squid3 not working. Access denied

    - by Nitish
    I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

    Read the article

  • Tunneling over IPv4 network

    - by JoesyXHN
    Hi, Most of the articles I have read about Tunneling. It describes that the tunneling supports for communication between 2 IPv6 networks over (crossing) an Ipv4 network. For example: TUNNEL A (IPv6) ==> INTERNET NETWORK (IPv4) => TUNNEL B (IPv6) Would it be doable for: TUNNEL A (IPv4) ==> INTERNET NETWORK (IPv6) => TUNNEL B (IPv4) Please give me an answer with elaborate explanation. Thanks in advance.

    Read the article

  • Automate opening HTML and printing to PDF

    - by craigpatik
    I need a way to automate the following process in Windows 7: Open an .html file in Internet Explorer Print to PDF Save the PDF with a patterned file name (i.e., original_name_YYYY-MM-DD.pdf) Ideally, I could drag and drop several files or open a whole folder of files at once and a PDF would be created for each one. A command line solution is also acceptable. The files have to be opened in the browser because parts of the page are rendered with JavaScript on page load. In other words, if you simply right-click on the file in Explorer and choose "print", the resulting file is not the same because the JS didn't run. If it helps, Internet Explorer can be set as the default browser, and a PDF printer can be set as the default printer.

    Read the article

  • Setting up WiFi extenders... is it possible to daisy-chain them?

    - by Bigbio2002
    At a location with limited cabling, I've had to set up WiFi signal extenders to cover the whole area. Here is a crude diagram... Internet - WiFi/Gateway - Extender 1 - Extender 2 | | PC (ethernet) WiFi device I was able to successfully daisy-chain three together, and I can access the internet from WiFi devices connected to the farthest extender. Is this a supported configuration? If not, what kind of issues can arise from it? The reason why I ask is that the PC keeps reporting IP address conflicts, and I'm wondering if that's caused because of the way this is configured. Additionally, I noticed that the extenders named their own SSID similar to the one they are connected to, but with a suffix. Would there be any issue in naming them all with the same SSID, to enable seamless roaming as you would with multiple standalone APs?

    Read the article

  • Can't access to access to my web server inside a network with Firewall on

    - by ianenri
    I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

    Read the article

  • can I achieve my dreams without a degree? [closed]

    - by Dhananjay
    It's really giving me a lot stress as my parents saying me to join college but I don't want. I know I can learn all programming by self studying but they keep saying join college otherwise no one will give you job. I always think positive but sometimes I also start thinking like them (what if my life will be spoiled if I do not go to college) There are so much things on internet. I can learn c++, objective c, java, AI, html, php all through internet (at least I think that I can learn whole by self studying and I can give 10 hour/day easily for studying) and I will keep practicing and become a good programmer in 2 years and then try to do some job for experience so no need to waste 4 years just for studying things which I can learn in 2 years and no need to waste money on college because they teach physics, chemistry all in first 2 years and I only want to study comp. Science. But now again I am thinking negative that what will happen if I do not get degree and what will I do after learning programming if I don't get job? Please suggest what should I do? Should I join college? or self study? Can I achieve my dreams without a degree if I study hard and learn many things? I have full confidence that I can self teach myself better than they will teach in college. I will open my app company and many more. But maybe I am over confident because I don't know what happens in real world. How they treat a person without degree, etc. Anyone of you had gone through this condition? What did you do?

    Read the article

  • Share the same subnet between Internal network and VPN Clients

    - by Pascal
    I would like to set up a configuration where VPN clients connecting to my Forefront TMG can access all the resources of my Internal network without having the to use the option "Use default gateway on remote network" on the VPN's TCP/IP Ipv4 Advanced Settings. This is important to me, since they can use their own internet while accessing my network through VPN (the security implications of this are acceptable on my cenario) My Internal network runs on 10.50.75.x, and I set up Forefront TMG to relay the DHCP of my Internal network to the VPN clients, so they get IPs from the same range as the Internal network. This setup initially works, and the VPN clients use their own internet, and can access anything that is on the internal network. However, after a while, HTTP Proxy Traffic from the Internal network starts getting routed to the IP of the RRAS Dial In Interface, instead of the IP of the Internal's network gateway. When this happens, the HTTP Proxy starts getting denied for obvious reasons. My first question is: does this happen because Forefront TMG wasn't designed to handle a cenario that I described above, and it "loses itself"? My second question is: Is there any way to solve this problem, either through configuration or firewall policies? My third question is: If there's no way that it can work with the cenario above, is there another cenario that will solve my problem, and do what I'd like it to do properly? Below are my network routes: 1 => Local Host Access => Route => Local Host => All Networks 2 => VPN Clients to Internal Network => Route => VPN Clients => Internal 3 => Internet Access => NAT => Internal, Perimeter, VPN Clients => External 4 => Internal to Perimeter => Route => Internal, VPN Clients => Perimeter Tks!

    Read the article

  • How do I output my audio input?

    - by VarLogRant
    A few iterations ago, I think this was Jaunty but could've been before, I would plug a 1/8" audio cable from the line-out of a Windows netbook to the line-in of my Ubuntu machine, so I would have all the sound from both machines without having to plug both into a mixer which I don't have. I didn't do this much, as I was pretty-much happy with Banshee at the time. But with Karmic, and still with Lucid, I can only get the output if I'm recording with Audacity. Which I'm not going to do from my web-development and systems programming workstation. I can tell by plugging in headphones that my netbook has audio out working. I can see Sound Preferences that the Ubuntu machine is receiving them. I just want the old behavior back. Help?

    Read the article

  • Should I avoid or embrace asking questions of other developers on the job?

    - by T.K.
    As a CS undergraduate, the people around me are either learning or are paid to teach me, but as a software developer, the people around me have tasks of their own. They aren't paid to teach me, and conversely, I am paid to contribute. When I first started working as a software developer co-op, I was introduced to a huge code base written in a language I had never used before. I had plenty of questions, but didn't want to bother my co-workers with all of them - it wasted their time and hurt my pride. Instead, I spent a lot of time bouncing between IDE and browser, trying to make sense of what had already been written and differentiate between expected behavior and symptoms of bugs. I'd ask my co-workers when I felt that the root of my lack of understanding was an in-house concept that I wouldn't find on the internet, but aside from that, I tried to confine my questions to lunch hours. Naturally, there were occasions where I wasted time trying to understand something in code on the internet that had, at its heart, an in-house concept, but overall, I felt I was productive enough during my first semester, contributing about as much as one could expect and gaining a pretty decent understanding of large parts of the product. I was wondering what senior developers felt about that mindset. Should new developers ask more questions to get to speed faster, or should they do their own research for themselves? I see benefits to both mindsets, and anticipate a large variety of responses, but I figure new developers might appreciate your answers without thinking to ask this question.

    Read the article

  • How to make a server check it's own availability on the web?

    - by Javawag
    Hi all, Just a quick question – my server is running at my house serving www pages at www.javawag.com. The problem is that my home internet connection keeps dropping randomly - for about 10 mins at a time. This is only an intermittent problem and will go away soon I hope. However, my server doesn't recover properly - when the connection comes back, I can still access it at 192.168.0.8 (locally) without any issue, but at www.javawag.com there's no reply! (Just an aside - my home internet connection is dynamic ISP, the domain www.javawag.com points to javawag.dyndns.org which in turn points to my IP, updated every minute by ddclient on the server) Is there some way for the server to check if it's accessible from the outside world periodically, and if not restart Apache/reboot? Oh, and if I reboot the problem fixes itself also! Javawag

    Read the article

  • Strange RDP / Remote Desktop problem

    - by John Landheer
    I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc computer B CANNOT connect as user Y to the server with mstsc! The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. I find it very strange....

    Read the article

  • NAT for static private addresses

    - by biggdman
    Could someone please help me out with the following scenario: I have a machine that hosts 3 lxc containers, and acts like a router for them. The LXC containers have private ip addresses set on the interfaces that are connected to the host. I want to provide Internet access to the containers and I want to configure the host system so it translates only the addresses that are configured static on the lxc containers interfaces. Should I try to configure the host so it translates each of the 3 private addresses to the public address of the host's interface that is connected to the Internet?

    Read the article

  • HDMI signal interrputs after 10 minutes plugged in a TV

    - by desert_unbound
    Ubuntu 11.10, Dell Inspiron N4050, VLC, Jupiter I'm trying to watch movies through HDMI output on a TV, with VLC, with the notebook unplugged from AC (but with enough battery for 2-3 hours of use), just with TV display (the notebook display stays off) And from 10 to 10 minutes, the TV turns black, and according to the TV, the HDMI cable is unplugged. But using the touchpad makes the screen appear again. In "screen" options, on system settings, i've set the screen to never turn off, and never reduce brightness using battery. In "power" settings, i've set to not suspend when using battery. In Jupiter, i've set (while trying to watch the movie) to work in maximum performance. I'm pretty sure it's not VLC, because i've set it to override power options and screensaver options (and also im not using xscreensaver). Also the movie continues, when the screen is black Maybe there's something that i'm missing? When i plug the HDMI in the notebook, i use jupiter to change the display (using the option "external display only")... maybe is that ?

    Read the article

  • Need to know who is hogging my bandwidth?

    - by Dev
    I have an ethernet connection to my iMac and with Internet sharing I am broadcasting the wireless network from my mac rather than using a wireless router. I use it to connect other devices wirelessly to the internet. But this makes all the traffic flow through my iMac. I wanted a way to analyze the traffic so that I know what connected devices are hogging the bandwidth at a given time and from which websites? I installed wireshark for mac and played around a little but it seems like an overkill when you first look at it. Can someone please help with few instructions to get what I need or any other way other than using wireshark? Thanks Dev.

    Read the article

  • Load balancing + NAT issue on BNT GBE 2-7 gear

    - by Clément Game
    Hi guys, I've got troubles configuring an Hardware load-Balancer with NAT functions. I have the following architecture: Internet === VIP (public) LB (private ip) ==== private addressed servers When a connection is initialised from the outside (internet) , the LB correctly forwards the SYN packet to one of the private servers. But when these servers want to reply with a SYN/ACK there is a problem. the initial SYN packet had as ip header : VIP = Private_server_Address But the private servers cannot reach VIP from their side (this is normal since it's nated), and then provide a correct reply. Have you guys any solution to correctly forward the packets to their correct destination ? Note: The load balancer, which is the default gw for the servers, also has a NAT rule for "masquerading" (actually more SNAT than real masquerading) Regards, Clément.

    Read the article

  • Any website/software where i can add some text rows on daily basis

    - by Moorage
    I have few notes or text like few remembering lines on daily or weekly basis. I want to write it. but i should be able to see at any backdate /monthly or yearly. The date-time should also be stored when i enter text. is it possible EDIT: I will explain clearly what i exactly want. Suppose while working on internet 1)i find "ABC is good for BCD". now i want to add that text to some online site where i can see later 2)Now i can add those type of things any time and on internet i can see that in tabular form like click to see montly list , yearly or weekly 3)Other thing is i should be able to add text as easy as possible like in firefox if i can press some shotcut and enter something and it gets added there rather than opening the site and then write The to do list do that sort of thing but they dont have creation date , rather they filter based on due date.

    Read the article

  • Emulate Historical Figures i.e. Einstein - Is this possible using linguistic logic for my http://www.ustimeline.com Education System

    - by Johnnylight
    After hearing about the success of IBM's Watson I started thinking perhaps emulating human language is now possible? My goal is to create Virtual Historical characters to represent the main characters in my Adventur-Cation The Great American Adventure program such as Einstein or Crazy Horse. The goal is to build an intelligent system capable of indexing the internet and storing the data using a schema using modern knowledge on linguistic theory (phonemes, morphemes, syntax) to build a system capable to returning a semantically sound response very similar to the response made by the same person if still alive today. The goal would be to use the same engine/system for all characters. Each characters would have their own digital representation and voice, and would organize data differently based on tags/keywords stored about the individual. Imagine a Max Headroom Einstein. Based on the success of Watson, I believe something like this may now be possible. Would be an interesting way to study history and would be a vehicle of entertainment as well. Can anyone confirm if this has already been attempted? Is anyone interested in exploring this using Cognitive Science, Psychology, Artificial Intelligence, Historical data captured on the internet, and Linguistic theory?

    Read the article

  • why are transaction monitors on decline? or are they?

    - by mrkafk
    http://www.itjobswatch.co.uk/jobs/uk/cics.do http://www.itjobswatch.co.uk/jobs/uk/tuxedo.do Look at the demand for programmers (% of job ads that the keyword appears), first graph under the table. It seems like demand for CICS, Tuxedo has fallen from 2.5%/1% respectively to almost zero. To me, it seems bizarre: now we have more networked and internet enabled machines than ever before. And most of them are talking to some kind of database. So it would seem that use of products whose developers spent last 20-30 years working on distributing and coordinating and optimizing transactions should be on the rise. And it appears they're not. I can see a few causes but can't tell whether they are true: we forgot that concurrency and distribution are really hard, and redoing it all by ourselves, in Java, badly. Erlang killed them all. Projects nowadays have changed character, like most business software has already been built and we're all doing internet services, using stuff like Node.js, Erlang, Haskell. (I've used RabbitMQ which is written in Erlang, "but it was small specialized side project" kind of thing). BigData is the emphasis now and BigData doesn't need transactions very much (?). None of those explanations seem particularly convincing to me, which is why I'm looking for better one. Anyone?

    Read the article

  • Color distortion with Intel HD4000 over HDMI output - VGA is fine

    - by Simon Möller
    I set up a new system with i5 3570k gigabyte z77 d3h using integrated graphics (HD4000) and I've installed the 64bit Desktop version of 12.04. Connected to my Acer Screen via HDMI, the colors are horribly distorted. I think the biggest issue is that black appears as greenish. Over VGA everything is fine. Interestingly, I once observed that connecting both, the VGA and the HDMI cable at the same time, solved the issue. Ubuntu thought 2 screens were connected, I mirrored the image, and over HDMI the colors looked fine. However, after a reboot I am now unable to reproduce this behavior. I read frequently, that Intel hardware should be supported out of the box by Ubuntu but it doesn't seem to be the case here. Should I upgrade my Kernel? If so, which version would you recommend? Thank you for your answers!

    Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >