Search Results

Search found 21184 results on 848 pages for 'cable internet'.

Page 445/848 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• Cant find one particular wireless network. Worked before, but sudenly stopt working.

  - by Haakon

  My first question here. My problem is: I cant find my wireless network at home. Situation: It worked fine 7 days ago. It works with a cable(wierd). I find the network on my ipad/phone. I can connect to wireless hotspot network form my phone and wireless at my university, and it works fine. I can connect to the network in windows What I have tried: Tried this Strange network issue; works on windows, but not on ubuntu, works on campus wireless, but not at home (removing resolve.conf). Hardware and software: I have a Broadcom card Use dual boot ubuntu 12.04 - windows 7 Things I did to make wireless work: blacklist brcmsmac blacklist bcma blacklist b43 blacklist ssb Can anyone help me? I'm about to kill myself(not literary)!! I'm not that good in linux so go gentle on me:)

  Read the article

• Ubuntu, connecting to WLAN

  - by Holly

  Hello, I successfully installed Ubuntu onto my usb hard drive. However, I'm not sure what the issue is with my internet. I'm not familiar enough with ubuntu to know whether this is a problem with recognizing my wireless card or with my internet, etc. So I suppose my question is, how do I tell whether it's recognizing my wireless card? (Network manager isn't showing any wireless signals, though I wasn't sure if it was supposed to. ) And, if it's not working, how do I go about troubleshooting that issue? Thanks!

  Read the article

• WDS (Wireless Distribution System) not work

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• Tool to launch a script driven by modem activity

  - by Will M

  Can anyone suggest a software tool (preferably under Windows XP or later) that would launch an application or script in response to a phone call being received on a landline phone line connected to a data modem on the same PC? or, better, in response to a sequence of touch-tones being played over such a phone line. This would allow, for example, using the telephone to manipulate firewall settings so as to create another layer of security in connection with remote internet access to that computer. I seem to recall seeing tools to do this sort of thing in the days before broadband internet access, when there was more attention to various tips and tricks for the dial-up modem, but a few attempts at Google hasn't turned anything up.

  Read the article

• VoIP and IPv6 with IPsec

  - by PhilCisco

  Hi, I had some basic questions about VoIP in a IPv6 architecture, right now I'm running VoIP in a v4 architecture, and I was thinking about to change everything to v6. my questions are not that practical but I would like to understand it well. Question 1: if i had internet full v6 or v4 and that I enable IPsec on my v6 router do I still need a VPN through the internet ? because my routers will anyway exchange their pub/priv key or their certificate to ensure the communication. Question 2: If the answer to question 1 is yes then I only have two advantages to put my VoIP architecture to IPv6 the second advantage for me is the NAT which I will not have anymore. I know that right now I should anyway still use things like NAT-PT, Tunnelling and so one but in full v6 are their any other advantages ? Thank you

  Read the article

• Windows updates behind a physical firewall with only IP based rules and generic outbound connections are turned off

  - by user125245

  I have some boxes that I do not want to allow any in or outbound traffic to the internet Except for windows updates. However the fire wall in place (Cisco ASA) apparently only supports ip based rules. As best I can tell access to Microsoft updates via anything other then the half dozen URL masks the Microsoft lists as needed does not appear possible. I have kicked around building a full WSUS that I would then manually copy the update files to so that no direct Microsoft access is needed but this sounds very top heavy for the very few boxes involved. I have also kicked around manual updates all around but am not certain how to be conveniently and confidently sure that the correct updates are being applied in the correct order. Any ideas from any direction would be appreciated. I want this as simple / cost effective as possible but have very little flexibility on the only absolutely required internet access policy.

  Read the article

• Virtualhosts - best way of dealing with it?

  - by axqe56

  I'm competent at the basics of Apache, PHP and virtual hosting but have a question about virtual hosting. As far as I'm aware, HOSTS files can only be in one of the following locations: C:/Windows/system32/drivers/etc (varies in older installs, I believe) I don't think it can be put elsewhere for use with Apache, simply for virtual hosts, and the main HOSTS file for blocking sites etc. I heard about PAC files on Uniform Server's website (http://wiki.uniformserver.com/index.php/Virtual_Hosting:_PAC) but they're browser-specific though, aren't they? What's the best way to deal with virtualhosts, other than HOSTS file? My server isn't currently open to the internet yet, but if it is, what's the best way to resolve DNS for my virtualhost domains if it were to become forward-facing (i.e open to the internet)?

  Read the article

• Need solutions in sharing a 3Mb/768Kbps DSL line to 60+ users and faster bandwidth

  - by elistp

  Two parts. Part 1: We currently have 2 DSL Lines with 3Mb/768Kbps speeds load balanced for 60+ users. Accessing the Internet is borderline unusable. The simple solution would be to get a faster DSL Line but the highest DSL package is 6Mb/768Kbps, has quite the price jump, and doesn't do anything to help with upload speeds. I'm looking for free or extremely low cost solutions (web cache, traffic shaping, bandwidth controls, etc) to help with making Internet access more bearable until the next funding year. Can anyone give any advice? Part 2: We're looking into a 4.5Mb bonded T1 in the next funding year which is of course significantly more expensive than 2 DSL lines. Are bonded T1s our only hope for faster speeds? Are there any better alternatives?

  Read the article

• Cannot access Nagios Web Interface

  - by Dominiqs

  After successfully installing Nagios core 3.4.1 (i also installed plug-in1.4.11) on our linux rhel 5.3 server i cannot login to the nagios web interface.I am running apache 2.2.3 I am using internet explorer 8 and also firefox 3.6.3 When i try to enter the url http//localhost/nagios/ on a desktop (on the same network as the Nagios server)it does seem to like it but if i try http//x.x.x.x/nagios/ (where x.x.x.x is the IP address of my nagios server) it likes it but then the authentication popup appears after entering the password and username(nagiosadmin) it throws the errors below The server x.x.x.x at Nagios access requires a username and password Warning this server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection) After a few attempts i get error 401 authentication required error from internet explorer ;this server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials or your browser doesnt understand how to supply the credentials required. Help Please anyone..seems like an authentication issue

  Read the article

• Is it possible to setup a DHCP server only for local virtual machines?

  - by thiesdiggity

  I have a quick question. I have a bunch of virtual machines (VMWare Workstation) running on an Ubuntu server and have found that VMWare NAT (DHCP) service is unreliable and slow. I have to use NAT instead of bridging because the server is in a data-center that does not have DHCP and I don't have enough static IP's for all the VMs. Is it possible to setup the host (Ubuntu) to be a DHCP server but only for the local virtual machines? The server has 2 network interfaces, so I'd set eth0 to be a static IP, which connects to the outside world, and eth1 to listen for DHCP. Now, I am thinking if I don't want DHCP to broadcast I would just not connect a cable to eth1 and setup the VM's to use bridging on eth1. That way DHCP would not broadcast through my network but be listening on that interface. Would that setup work?

  Read the article

• College wifi works easily on Linux, but not on Windows

  - by user52849

  In Linux: After connecting to the college wifi, going to the network login page logging in, the internet works perfectly as it should. In Windows: After connecting to the college wifi, going to the network login page, logging in, Windows shows "Internet access" and the wireless icon turns white. But still after that, regardless of the browser being used, attempting to accessing any page just shows "Sending request". It does work though after a lot of tries, but only in intervals. But when running Ubuntu 11.10 in VirtualBox, it works properly just like booting in Ubuntu, even if it isn't working on Windows. The college wifi service is really crappy and has been unable to solve this problem. I'm pretty sure there should be a solution for this, but what? What is it that Ubuntu is doing right and Windows isn't? Windows settings set to "Automatically detect settings" and no proxy server used.

  Read the article

• Trust External Surround Soundcard SC-5500p not working

  - by Ederico

  I got the following external sound card to make some awesome noise with my speaker set. It should be plug and play, but it so happens that when I plug it in and hook everything up, there's no sound at all. The speaker set I have works if I plug it in the laptop directly (or rather, if I plug the front speakers cable as I can't plug anything else). http://www.trust.com/products/product.aspx?artnr=14134 Would anyone know how I can workaround this problem and make full use of this external sound card on my Ubuntu 12.04 system?

  Read the article

• My Laptop (HP/Compaq 2510p) running ubuntu 10.04 LTS keeps losing the WLAN connection.

  - by Ernelli

  I am using Wicd and can successfully connect to my ADSL router (Thomson TG 787) using WPA PSK. But with regular interval I lose the ability to connect to Internet. I can ping the GW and can actually ping servers on the Internet but not connect to them using HTTP (Tested with both Firefox and wget). I would suspect the router unless for the fact that the problem does not show up when running Windows XP on the same computer and also, when the problem arises, a simple disconnect/connect in Wicd solves the problem, which does not involve the router (Except for the DHCP request). I have searched Ubuntu forums without luck, most problems described relate to specific network drivers or other problems. Does anyone have the same experience with Linux/Ubuntu and WLAN?

  Read the article

• Dell Vostro 1510 can't connect to wireless--how can I fix this?

  - by Miss Spider

  I'm having some trouble with my Dell Vostro 1510. I installed wubi on it two days ago and I've only been able to use the Internet with an ethernet cable. The network seems to definitely recognize that the wireless--even other peoples' wireless--is there, but it can't manage to get on. I'll post the lpsci here, so that you can see the Broadcom card I'm working with. I have downloaded the kernel 2.6.39-0-generic, which doesn't appear to have done a lick of work. 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• Created a new zone in DNS manager - can't get site bindings to work in iis 7

  - by nick gowdy

  Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

  Read the article

• proxy server software for windows xp

  - by This is it

  Hi Is there a proxy software for Windows XP that can support HTTP, HTTPS, SMTP, IMAP, POP, FTP, etc. (the more the better)? We tried apache mod_proxy but FTP doesn't work through it (at least not all features). Maybe we don't need proxy server for following requirements (we are open for suggestions): - Centralized access point to internet for several users (proxy server?) - Users use Browser (firefox/IE - HTTP, HTTPS), Outlook (SMTP, POP, IMAP) - Logs to see where did users go on internet - Possiblity to connect to FTP server Windows xp, which is used as proxy server, is a virtual machine, and all other users/clients are virtual machines as well (Hyper-V)... Thanks for suggestions. Cheers

  Read the article

• Ubuntu 12.04 wireless disabled even though the direct connectin (thru modem) is working fine

  - by user90841

  Need help with my newly installed Ubuntu 12.04 system (dual booting along with Win 7), even thoguh I can use internet using the modem and directly plugging it, the wireless network is disabled and it says firmware missing. I tried the following options: 1) checking to see if the wireless is disabled using the hot keys (F2 or Ctrl+F2, Fn + F2 keys), the wireless is working fine in Win 7 but not in Ubuntu. 2) I am able directly plug the laptop with the modem and able connect to Internet using Ubuntu. 3) From the top right hand menu bar, te Wireless networks options say "device not ready (firmware missing) and the Enable Wireless checkbox is checked. 4) tried the command "rfkill list" , it shows all are NOT blocked. 0: phy0: Wireless LAN soft blocked:no Hard blocked: no 1: dell-wifi: Wireless LAN soft blocked:no Hard blocked: no 2: dell-bluetooth: BlueTooth soft blocked:no Hard blocked: no 3: hci0 Bluetooth soft blocked:no Hard blocked: no 5) ifconfig command shows eth0 and lo (lcoalhost) up and running but the wlan0 option is not available to show unless I type ifconfig -a, when it shows wlan0 but its down. 6) The command lspci -vvnn | grep 14e4 shows 04:00.0 network Controller [0280]: Broadcom Corp BCM4312 802.11b/g LP-PHY [14e4:4315] {rev 01) 08:00.0 Ethernet Controller [0200]: Broadcom Corp Netlink BCM5784M Gigabit Ethernet PCIe [1434:1698] {rev 10) 7) The file /var/lib/NetworkManager/NetworkManager.state shows all options are true (networking enabled, wireless enabled, wwlanenabled and wimaxenabled all options are set to true). 8) 'additional drivers' in your Dash and/or Preferences do not bring up anything at all. 9) output for lshw -C network shows *-network DISABLED description : Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4_00"43:b6:ab capabilities: ethernet physical wireless Configuration: broadcast=yes driver=b43 driverversion=3.2.0.29-generic-pae firmware=N/A link=no multicast= yes wireless=IEEE 802.11bg

  Read the article

• Ubuntu, connecting to WEP

  - by Holly

  Hello, I successfully installed Ubuntu onto my usb hard drive. However, I'm not sure what the issue is with my internet. I'm not familiar enough with ubuntu to know whether this is a problem with recognizing my wireless card or with my internet, etc. So I suppose my question is, how do I tell whether it's recognizing my wireless card? (Network manager isn't showing any wireless signals, though I wasn't sure if it was supposed to. ) And, if it's not working, how do I go about troubleshooting that issue? Thanks!

  Read the article

• is there a cheatsheet for linux commands to save your system?

  - by Asaf

  I've recently lost my window options, had to somehow manipulate my way to Xchat and ask some people how do I get it back (it was metacity --replace, and after I decided to stop the command and run it in background the X was completely useless so I had to do killall -u user). And that was after the internet connection stopped working for some reason (might've been the ISP) ..The thing is, after using linux a long time, I still get the feeling that on dire situations, I don't know the good tricks (stuff like metacity --replace) I feel like a really need like a "rescue" cheatsheet for things like "how to save the X no matter what without pressing reset" and "how to reset the system to "normal state"" "how to connect to the internet through the command line" "how to monitor what the X is doing" (using ubuntu linux 10.04 btw)

  Read the article

• Android : How to open youtube links on my facebook messenger app, in the youtube app? [migrated]

  - by dev_android

  I am unable to play YouTube videos from the links I get on my Facebook Messenger app. Here's what happens: A friend of mine posts a video link to me (YouTube link) as a message on Facebook. I receive it on my Android mobile in the Facebook messenger app. I click on it and it shows a Dialogue-Box (you can call that a pop-up) which asks me to choose an app to open the video with. Now earlier, there used to be the video player apps in my mobile along with the internet browsers installed on my mobile that used to come up there. So I would select an internet browser, and it in turn would re-direct me to the "YouTube" app itself. However, now, I am only getting video-players in that Dialogue Box as an option to open the YouTube video, but of course, if I select them, they are not able to stream the video. Has anyone found a way around this problem? It is really bothersome.

  Read the article

• how to properly edit hosts, hostname and resolf.conf? [migrated]

  - by Firewall

  i,v been searching the internet for a real noop tutorial on the subject but could not found any direct info. on how to edit these files the proper way. i,v got a debian internet server that i use to host some personal domains and runs squid and rTorrent. the server is up and running with no problems but i am confused about a few things. lets say that i named my server (foo), my domain is (example.com) and my public IP is 95.211.133.200 now: should /etc/hostname contains: tango.example.com or tango <----- just the server name should /etc/hosts contains: 127.0.0.1 localhost.localdomain localhost 95.211.133.200 foo.example.com foo should /etc/resolf.conf contains (along with the nameservers) both: domain example.com search example.com or just the first one. are there any other files that i should edit in order to make things right? last thing, the command: domainname returns: (none) i believe it should return (example.com). what should i do to correct that?

  Read the article

• Routing between two subnets. (Need Solution)

  - by rehanplus

  Need help according to scenario given: Client end PCs: 400 + Network : Server 1 (Linux) : 192.168.2.0/24 (For Application, Internet not working) GW: 192.168.2.1 Clients: 192.168.2.1 - 254 Server 2 (Linux) : 192.168.3.0/24 (For Internet users) GW: 192.168.3.1 Clients: 192.168.3.2 - 254 Server 2 is connected to DSL Broadband. Server 1 and Server 2 both are on same physical network i.e. Same switches. Current issue: i have to deploy a file and print server but this server will be accessed by both (192.168.2.x and 192.168.3.x) one same workgroup. as both subnets are on same switched network. Limitations: Currently there is no hardware routers and firewall. Need to complete this task with Linux / Windows / AD. Tested / Worked so far: Configured one PC with two NIC's With the IPS: NIC 1 : 192.168.3.2 GW: 192.168.3.1 Subnet: 255.255.255.0 NIC 2 : 192.168.2.2 GW: Empty Subnet: 255.255.255.0 Kindly provide any solution what should i do to get sharing enable on both Subnets. Thank you All

  Read the article

• Windows 8 update error code 80072EFE? What's the solution?

  - by RidDeBakTiYar

  I keep getting the error code 80072EFE and windows is not installing 11 important updates. Also .NET framework 3.5 is not getting installed it keeps saying that its not able to download. My internet connection is working fine and I am able to browse over the entire internet. I have not changed any of the settings and I am running on Windows 8. The error code I get for .NET is 0x800F0906. Windows live essential are also not getting downloaded. Is there some issue with the Microsoft servers these days?

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >