Search Results

Search found 16415 results on 657 pages for 'computer'.

Page 444/657 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

• Group policy results failing with "Invalid class" error

  - by bshacklett

  When trying to run the Group Policy Results Wizard against a specific workstation, I'm getting the following error: The wizard was unable to generate the computer or user's data due to insufficient permissions. Details: Invalid class I'm guessing that the class being referred to is a WMI class, but I haven't gotten much farther. I've run sfc /scannow on the machine with no luck. I've also followed all of the recommendations in this article: http://windowsxp.mvps.org/repairwmi.htm. I cannot find anything useful in the event logs and I can't think of anywhere else I could look to find out what's really happening here. Any help would be appreciated.

  Read the article

• Using keyboard specific keyboard-layouts in OS X

  - by Patrick O'Doherty

  I use a Kinesis Advantage with my MacBook Pro. While I use the dvorak layout when using the MBP's built-in keyboard the Kinesis has its own internal dvorak mode which assumes the host computer is using QWERTY. Is it possible to have OS X change the keyboard layout depending on which keyboard is currently being used? As far as I am aware this is possible on linux systems with HAL support but I haven't been able to find any support docs for OSX that advertise this ability. Thanks!

  Read the article

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• Windows Server 2012 - SSL Cypher Suite Order Not Long Enough

  - by Sam

  I want to re-order the cypher suites on our new Windows Server 2012 box to help mitigate the BEAST vulnerability for our clients. I went to Local Group Policy => Computer Configuration => Administrative Templates => Network => SSL Configuration Settings, opened SSL Cypher Suite Order, enabled it, and copied the values from the SSL Cypher Suites textbox. I pasted them into notepad, re-ordered them, then copied+pasted them back into the SSL Cypher Suites textbox. However, the box isn't long enough to hold them all, despite the fact that the length didn't change. I would have to drop the last 3 cyphers (SSL_CK_DES_192_EDE3_CBC_WITH_MD5,TLS_RSA_WITH_NULL_SHA256,TLS_RSA_WITH_NULL_SHA) in order for it to fit. Should I just drop them? Other ideas?

  Read the article

• connect to ssh server thru 80 via HTTP proxy?

  - by im_chc

  Hi, Please help: I want to connect to my ssh server at home However, I'm behind a corporate (CORP) firewall, which blocks almost all ports (443, 22, 23 etc). But it seems that 80 is not blocked, coz I am able to surf the web after I login (i.e. IE sets to CORP's proxy server, and start IE - displayed CORP intranet portal - type in google.com - dialog pops up for userid + pwd - login successful, and surf without restrictions) My ssh server listens at 443. My question is: Is there a way to connect from a computer behind the CORP firewall to the ssh server thru the 80 port, with the ssh server still listening on port 443? Changing the ssh server to listen to port 80 is not an option, coz my home ISP blocks 80. Can I use a public proxy which listens at 80? After some research on google I found that there is something called "connect to SSH thru an HTTP proxy" using the Cockscrew software. Is it useful? Or is there some other way to solve the problem?

  Read the article

• Cannot ping any computers on LAN

  - by Timothy

  I havem't been able to find a straight forward answer on this yet. I'm hoping people here are able to help! Keep in mind that I'm a complete beginner at this - this is the first installation i've done for any LINUX systems ever so please keep that in mind when answering this question. We are a complete Windows shop, using nothing but Microsoft products but looking into the value of OpenStalk however have been having problems getting Ubuntu Server installed and speaking to the network. The machine is getting an IP address which is telling me that some sort of DHCP activity is working but I'm not able to ping any computer on our network as well as not able to connect to the internet. Every time I try to ping i'm getting; Destination Host Unreachable I've tried using modifying the resolv.conf file with our static details to match my Windows 7 machine still with no luck. Even tried disabling the firewall on Ubuntu Server 11 and no luck. Any ideas? Please let me know if there is any information you need from the server and I'll post up.

  Read the article

• How to control the time before Windows 7 wakes from standby and hibernates?

  - by Ricket

  Ever since I reformatted my laptop, it just hasn't been the same. Before reformatting I noticed that if it was in standby for around 24 hours, it would automatically wake up and go into hibernation. I think that's a pretty cool feature and I didn't mind it. But lately, it's been waiting only a few hours (maybe 3-6; I haven't really timed it or paid enough attention) before waking up from standby and going into hibernation. There have been a few instances where this has been bothersome, and I'd like to change it back to a nice long wait time. Where is this setting? What setting in Windows controls the time before the computer wakes up from standby and goes into hibernation?

  Read the article

• Can't connect to hidden network with BCM4313

  - by poomerang

  The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

  Read the article

• Ubuntu Gnome 14.04 Instal Nvidia drivers

  - by user3524668

  I have been looking all over the web, and tried every suggestion I found to get the nvidia drivers working on my computer with Ubuntu Gnome 14.04, with no luck. Every time I install a driver or choose to use the driver from addition drivers, when I reebot, I cannot log in again. It gets stuck at the logo screen. I need to go to the ALT + CTRL + F1 to purge all nvidia traces so I can get back. Is it possible to install the new nvidia drivers? I just upgraded from 13.10 to 14.04, I have an Asus N550VJ which has hybrid graphics with Intel 4000 / Nvidia 750M What Im looking for is to try the primus functionality to disable the discreet card and enable it whenever I want to play or run heavy graphic stuff. When I was in 13.10 I was using bumblebee, but, since, the nvidia prime is supposedly mature enough, I wanted to try it. Is this possible for Ubuntu Gnome 14.04. I read there was a bug with gdm, but also, saw that it was already fixed. Thank you very much for your help. Im not that well versed in linux.

  Read the article

• Is there such thing as a portable database that runs easily OsX and Windows?

  - by Jean-Philippe Murray

  I need to make a small database for a project at school (not computer related at all, I'm indexing and categorizing paper documents of a research projet). The thing is that in september, my semester is over and other students will have to taker over the project (and so on, for every semester!), so I'd need something that would be free and OS agnostic (or at least OsX/Windows) so it would easily be given to the next students on the project. I was thinking about a WAMP running USB key that would have a MySQL / HTML interface, but it will become locked to the OS I choose first. LibreOffice and the likes will be an option in the end if I don't find anything truly portable. Anyone has a solution in mind?

  Read the article

• Do programmers need a union? [closed]

  - by James A. Rosen

  In light of the acrid responses to the intellectual property clause discussed in my previous question, I have to ask: why don't we have a programmers' union? There are many issues we face as employees, and we have very little ability to organize and negotiate. Could we band together with the writers', directors', or musicians' guilds, or are our needs unique? Has anyone ever tried to start one? If so, why did it fail? (Or, alternatively, why have I never heard of it, despite its success?) later: Keith has my idea basically right. I would also imagine the union being involved in many other topics, including: legal liability for others' use/misuse of our work, especially unintended uses evaluating the quality of computer science and software engineering higher education programs -- unlike many other engineering disciplines, we are not required to be certified on receiving our Bachelor's degrees evangelism and outreach -- especially to elementary school students certification -- not doing it, but working with the companies like ISC(2) and others to make certifications meaningful and useful continuing education -- similar to previous conferences -- maintain a go-to list of organizers and other resources our members can use I would see it less so as a traditional trade union, with little emphasis on: pay -- we tend to command fairly good salaries outsourcing and free trade -- most of use tend to be pretty free-market oriented working conditions -- we're the only industry with Aeron chairs being considered anything like "standard"

  Read the article

• How do i get a more recent version of Java on my Mac than is showing up in software update?

  - by Cd Lolly

  I need at least Java 1.6 to run a program that someone else in my lab wrote On the Java website it tells me to update Java via apple's software update function, i've run this a few times but it only got up to Java 1.5.0_24 and it now says no more updates are available for my computer Is there another way to update Java on a Mac? Is my operating system maybe to old for Java 1.6? i'm not sure what i'm running exactly, and i can't find a list of what mac operating systems run what versions of Java because the java site just suggests using Mac's software update.

  Read the article

• Can't connect to YouTube from specific network

  - by Tyilo

  Using my current network, I am unable to connect to http://www.youtube.com/. It doesn't matter what browser I use or if I use a cli-command (wget, curl). Error in Google Chrome: Oops! Google Chrome could not connect to www.youtube.com Error using curl: curl: (7) couldn't connect to host If I use nslookup to get the IP-address of YouTube, I get 173.194.32.32. If I go to http://173.194.32.32/ in my browser it can connect, but as Google is probably checking the Host HTTP-header, it shows Google's frontpage instead. There is no blocked websites on the router and other devices on the network seems to work. My computer only has this problem on this specific network. I am using Mac OS X 10.8.2 on a MacBook (mid 2009).

  Read the article

• LGA 1155 or LGA 2011? Which has a brighter future?

  - by Langdon

  I'd basically like to rehash this question, only 22 months later. The last system I built was in 2006, shortly after AMD came out with socket AM2. I was able to upgrade the processor on it 3 times and would love to do the same with my next computer. Since AMD seems to be lagging, I'm going for Intel this time. I've read that Intel changes chip sets all the time, so there's no safe bet. I also read (1 comment on 1 forum) that said LGA 2011 will have 8-core support, but LGA 1155 won't, which leads me to believe that LGA 2011 might be a better choice. Anyone have any good advice for me?

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• disable 250 character URL limit in Internet Explorer

  - by Keltari

  Users of a SharePoint Document Library are getting this error: The URL for this file is too long for the application. A temporary copy of this file will be opened on your computer. You must save this copy as a new file. After doing some research, it appears Internet Explorer has a limit of about ~250 characters for a URL. Some URLs provided by SharePoint far exceed this limit. One example being 790 characters long. Is there a way to disable this limit? I have looked, but there doesnt appear to be a solution, other than shortening the folder/path names.

  Read the article

• How to Use 3 Monitors

  - by The.Anti.9

  Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

  Read the article

• DualLayout OpenSourceFood demo site installation instructions

  - by svdoever

  We released DualLayout which enables advanced web design with the power of SharePoint. DualLayout and a demo site can be downloaded from the DualLayout product page. This blogpost contains detailed instructions on installing the demo site. The demo site is based on the site http://opensourcefood.com. The demo site requires internet access because it still links to pages and resources of the real site. Execute the following steps to install the demo site: Copy the OpenSourceFoodDemo.zip file to your SharePoint Server 2010 Make sure that the zip file in “unblocked”, otherwise files are assumed from other computer (right-click on zip file, press “Unblock” button if available) Unzip the OpenSourceFoodDemo.zip to a folder of your choice (c:\OpenSourceFoodDemo) Open the SharePoint  Start->Microsoft SharePoint 2010 Products->SharePoint 2010 Management Shell Change directory to the unzip folder (cd c:\OpenSourceFoodDemo) Start install script: .\InstallDemoSite.ps1 Answer the questions, default values in most cases ok. A little guidance: Question: Give credentials for the account that will be used for the application pool Answer: use for example same account as used for the application pool of your SharePoint site (lookup in IIS Manager) Question: Give credentials for the account that will be used for the application pool Answer: Use same account you are currently logged in with The demo site is made available through a backup and restore. The SharePoint Server 2010 installation must be patched to a level equal or higher to the update level on the SharePoint Server used to create the backup. If you get errors with respect to restore check http://technet.microsoft.com/en-us/sharepoint/ff800847.aspx for downloading the latest cumulative update.

  Read the article

• What is Mobsync.exe? Assuming I don't need it, can I disable it in Windows 7 without ill side effect

  - by Chris W. Rea

  I'm running Windows 7. Occasionally when I resume my computer from standby, it seems to wait 20-30 seconds or so before giving me full control back. In an attempt to diagnose why, I've been watching what's going on using the awesome Process Explorer. One of the processes I've noticed being started during that hiccup time is Mobsync.exe, described as "Microsoft Sync Center". Sync? Sync what? So, what is Mobsync.exe used for, exactly? Assuming I don't need its functionality, can I disable it in Windows 7 without ill side effect? If so, what's the best way to disable Mobsync.exe?

  Read the article

• Setting up NIS/NFS on Mac OS 10.6

  - by evan

  We have an Ubuntu NIS/NFS server at work and we recently got a few new iMacs. Is there a way to set them up so they can use the linux user accounts and mount the shared nfs files? Are there any guides on how to do this? I've been googling with no success. I tried getting NFS to work by connecting to the server via the Disk Utility but after I run 'sudo automount' from the command line and ls the directory I tried to mount it to (Volumes/nfs) it gives a permissions error. If there isn't a way to do this, anyone know of any not to complicated ways to share user accounts and files between mac and linux computers (and even hypothetically a windows computer one day?) I know its kind a of huge question, but I'll greatly appreciate any advice on the topic. Thanks!

  Read the article

• Will I be abled to access 2nd HDD from dual-boot

  - by Ruben

  I'm planning to have a dual-boot on my computer. I have 2 physical hard drives, one 500GB and one 2TB. What I want to do, is have a dual-boot setup (2 partitions, both 50 GB) for Windows 8 and Windows 7. But will I be able to access the 3rd partition on the disk, or the other disk from both OSs? In this case, it would be really useful to access files and install programs, because I could use them on both OSs, as long as I have the same registry keys.

  Read the article

• ODI 11g - Faster Files

  - by David Allan

  Deep in the trenches of ODI development I raised my head above the parapet to read a few odds and ends and then think why don’t they know this? Such as this article here – in the past customers (see forum) were told to use a staging route which has a big overhead for large files. This KM is an example of the great extensibility capabilities of ODI, its quite simple, just a new KM that; improves the out of the box experience – just build the mapping and the appropriate KM is used improves out of the box performance for file to file data movement. This improvement for out of the box handling for File to File data integration cases (from the 11.1.1.5.2 companion CD and on) dramatically speeds up the file integration handling. In the past I had seem some consultants write perl versions of the file to file integration case, now Oracle ships this KM to fill the gap. You can find the documentation for the IKM here. The KM uses pure java to perform the integration, using java.io classes to read and write the file in a pipe – it uses java threading in order to super-charge the file processing, and can process several source files at once when the datastore's resource name contains a wildcard. This is a big step for regular file processing on the way to super-charging big data files using Hadoop – the KM works with the lightweight agent and regular filesystems. So in my design below transforming a bunch of files, by default the IKM File to File (Java) knowledge module was assigned. I pointed the KM at my JDK (since the KM generates and compiles java), and I also increased the thread count to 2, to take advantage of my 2 processors. For my illustration I transformed (can also filter if desired) and moved about 1.3Gb with 2 threads in 140 seconds (with a single thread it took 220 seconds) - by no means was this on any super computer by the way. The great thing here is that it worked well out of the box from the design to the execution without any funky configuration, plus, and a big plus it was much faster than before, So if you are doing any file to file transformations, check it out!

  Read the article

• What does the fan speed sensor really report?

  - by T. Verron

  I have an overheating issue on my netbook (ASUS EeePC 1015PW), which I'm trying to troubleshoot. Using lm-sensors while overheating gave me this output : acpitz-virtual-0 Adapter: Virtual device temp1: +86.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4089 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +82.0°C (crit = +100.0°C) Core 1: +80.0°C (crit = +100.0°C) But I can't hear the fan. So I enabled manual pwm controling and set the fan to full speed, and after a few minutes I got this output : acpitz-virtual-0 Adapter: Virtual device temp1: +65.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4016 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +62.0°C (crit = +100.0°C) Core 1: +58.0°C (crit = +100.0°C) And this time I could hear the fan spinning. So there's quite obviously an issue with either fan control or fan monitoring. Hence the question : what kind of physical information does the fan sensor really report? Thank you PS. I should have added that the computer is a small, hard-to-disassemble netbook, so I can't and don't want to try experiments like "block the fan and see what the sensor reports".

  Read the article

• Transmission shutdown script for multiple torrents?

  - by Khurshid Alam

  I have written a shutdown script for transmission. Transmission calls the script after a torrent download finishes. The script runs perfectly on my machine (Ubuntu 11.04 & 12.04). #!/bin/bash sleep 300s # default display on current host DISPLAY=:0.0 # find out if monitor is on. Default timeout can be configured from screensaver/Power configuration. STATUS=`xset -display $DISPLAY -q | grep 'Monitor'` echo $STATUS if [ "$STATUS" == " Monitor is On" ] ### Then check if its still downloading a torrent. Couldn't figure out how.(May be) by monitoring network downstream activity? then notify-send "Downloads Complete" "Exiting transmisssion now" pkill transmission else notify-send "Downloads Complete" "Shutting Down Computer" dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.RequestShutdown fi exit 0 The problem is that when I'm downloading more than one file, when the first one finishes, transmission executes the script. I would like to do that but after all downloads are completed. I want to put a 2nd check ( right after monitor check) if it is still downloading another torrent. Is there any way to do this?

  Read the article

• Buying Video Card for 1600x900 monitor?

  - by Yar

  I just bought a monitor for a relative's computer (Intel 82915G chipset) which should produce 1600x900. Though the current card can produce 1600x1200, there's no way (that I know of) to force it to produce 1600x900. Assuming buying a card would be a solution, how would one find a cheap video card that can do 1600x900? They don't seem to list the modes in most ads. If I'm missing something in Windows, please let me know, but I've looked around quite a bit and tried many things (including unsupported resolutions, etc).

  Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >