Search Results

Search found 16035 results on 642 pages for 'connection pooling'.

Page 448/642 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

• Hard drive skipped in boot

  - by Yasin

  Good evening. I just installed Ubuntu 12.04 using a USB, but right after the install, after restarting the machine, I get a message asking me to insert a bootable drive. My boot settings in Bios have the hard drive first, then DVD, then USB stick, and I have two systems installed, Windows 7 and Ubuntu 12.04. I suspected the hard drive got somehow disconnected internally, so I checked but everything was in place. I used the live USB to start Ubuntu, and I could see the hard drive and mount whatever partition I wanted. The one that contains the recently installed Ubuntu, looks the same. (It hasn't been deleted or anything). I'm not sure if this is a hardware problem or a loader(grub) problem, because the hard drive is visible. Only it isn't seen by the BIOS. My only means of internet connection is a USB modem, which doesn't work when I'm using the live USB, so I have can't download anything from the internet, in case someone asks. I also reinstalled Ubuntu 12.04, to no avail. This is my second problem with this laptop, and Ubuntu, and it's not even a week old. I hope this one gets solved. Thank you.

  Read the article

• What is the cost of running a desktop machine at home?

  - by vinc

  How much does it (roughly) cost to leave my personal home computer running 24/7 for a year? I'm not doing anything unusual; I run a webserver for myself, surf the web, write some code. I don't have any specific specs. So for example there might be the cost of electricity, internet connection, and possibly some other factors that I've overlooked. I'm trying to decide whether it would be a good idea to turn off my computer when I'm asleep and not using it. Is the cost negligible, maybe 1 USD per day, something in between or more?

  Read the article

• Can i change the subnet on the vpn side of a server without having to change its whole lan (to avoid collission)

  - by Gusty

  Ohai, ive got a xp server with a client connecting via VPN. Problem (as we all know) is that sometimes the subnets clash. Instead of changing the whole server network every time this happens, cant i just have the server appear to have a different subnet to vpn clients? I have no interest in accessing other computers than the server on its LAN. I tried just turning off automatic dhcp in the servers vpn settings and changed it to 172.31.255.x. The client gets the address assigned alright and it can ping 172.31.255.1 but i cannot ping the server name (because the dns on the clients vpn connection points at 192.168.0.1?) wisdom? PS everything worked until the client hit a network with the same subnet as the server lan. thanks

  Read the article

• Prevent runaway threads and ultimately physical overheating and battery drain on Android [migrated]

  - by foampile

  I was wondering if there is a system monitor app that will raise (audible) alerts and offer app closure if it detects runaway threads on Android that cause physical overheating and battery drain. E.g., I just had to turn my phone off because there was a runaway thread that I think was constantly trying to refresh FB where there was very poor connection, so it was going in a virtually endless loop. But I get that with other apps too and not just Facebook. I'd like to actually shut apps down when they're detected. I am not kidding, I nearly burned my fingertips when I touched my phone -- it was on for only 2 hrs and the battery was almost dead. It is because 4G is very poor inside my office building and I checked Facebook walking between my vehicle and the building this AM. After that, the app kept trying to refresh continuously without success and overheating the phone.

  Read the article

• Solaris 11 VNC Server is "blurry" or "smeared"

  - by user12620111

  I've been annoyed by quality of the image that is displayed by my VNC viewer when I visit a Solaris 11 VNC server. How should I describe the image? Blurry? Grainy? Smeared? Low resolution? Compressed? Badly encoded? This is what I have gotten used to seeing on Solaris 11: This is not a problem for me when I view Solaris 10 VNC servers. I've finally taken the time to investigate, and the solution is simple. On the VNC client, don't allow "Tight" encoding. My VNC Viewer will negotiate to Tight encoding if it is available. When negotiating with the Solaris 10 VNC server, Tight is not a supported option, so the Solaris 10 server and my client will agree on ZRLE.  Now that I have disabled Tight encoding on my VNC client, the Solaris 11 VNC Servers looks much better: How should I describe the display when my VNC client is forced to negotiate to ZRLE encoding with the Solaris 11 VNC Server? Crisp? Clear? Higher resolution? Using a lossless compression algorithm? When I'm on a low bandwidth connection, I may re-enable Tight compression on my laptop. In the mean time, the ZRLE compression is sufficient for a coast-to-coast desktop, through the corporate firewall, encoded with VPN, through my ISP and onto my laptop. YMMV.

  Read the article

• PHP and MySQL related Problem

  - by Tareq

  Hi friends, I have a local LAN to my office. Recently I designed a New Software system using PHP, MySQL for my office. My boss wants to see the reports from online. My problem is, my network connection is often failed to my office. But I have to input all time. So, now I want to use two instances of my software. One will be using the LAN and one will be uploaded to my server. My question is, how can I easily keep the both databases up-to-date always? Please help me with this issue. If you want more info please feel free to ask me.

  Read the article

• Two VPN connections from the same IP address

  - by Tayles

  I have set up a server running Windows Server 2008 which two remote users can dial into using a VPN connection. It works fine unless they are both in the same location, in which case only one of them can connect. I understand this is because the PPTP protocol cannot cope with two VPN connections from the same IP address. Is this correct? If so, what can I do about it? Please note that the remote location in question is a serviced office, so we're not in a position to change or play around with their router. Thanks!

  Read the article

• MySql transfer / update (a bit specific)

  - by Jeff

  before posting I was digging whole site but didn't find help for my problem, so I hope someone will help... Facts: 30 Gb mysql database on remote server (about 20.000.000 rows) data are once weekly updated in local network (mysql) I need to transfer/replace local updated database with remote connection is about 2mb (real mb, not mbps) up/down Point is that I can't have 'down time' of remote mysql server. Until now I Tried: navicat data sync - Ok, but take about 3 days to finish dbForge - ok but need 5 days to finish mysql dump transfer to remote server and execution - about day, but a lot of downtime rsync folder with database /mysql/lib/MY_DATABASE - 4 hours, but after that I need to execute always 'repir on remote server' which takes about 2 hours, and a lot of down time mysql dump piped from cl to directly goto server - still now satisfied many problems I could give you more things that I tried... mysql replication - slow Anyase, what is best,best way to: refresh remote mysql on weekly level and in same time to have 0 sec down time nor huge server load If you have any idea please share

  Read the article

• Only 5 simultaneously users with PPTP VPN?

  - by Plastkort

  we have a windows 2008 R2 standard server which job is to accept incoming VPN connections via PPTP. it seems to work fine, but the moment the 6th user try to connect, we get the following error: ERROR_VPN_DISCONNECT 807 The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. where do we find out how to increase the amount of simultaneously users?, I read somewhere that we can have over 100 connected clients at the same time, when I created this server, I did the following : Network & sharing - Network adapters - File - new incoming connections now I tried to choose and create users here, but we have a domain controller which seems to override this, so the domain users works after this I was able to connect atleast 5 clients... how and where do I increase the "capacity"?

  Read the article

• Access requires a username and password

  - by articles

  Access requires a username and password Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection) I am getting this above message. I have hosted a website in godaddy hosting space. But when i run it.. it is prompt for User name and Password (above message). I am not using windows authentications in my website.... Moreover, i have test my website code on testing server....it never prompts for this message unless Integrated Windows Authentication is checked. Any help is appreciated.. Thanks

  Read the article

• Logs show lots of user attempts from unknown IP

  - by rodling

  I lost access to my instance which I host on AWS. Keypairing stopped to work. I detached a volume and attached it to a new instance and what I found in logs was a long list of Nov 6 20:15:32 domU-12-31-39-01-7E-8A sshd[4925]: Invalid user cyrus from 210.193.52.113 Nov 6 20:15:32 domU-12-31-39-01-7E-8A sshd[4925]: input_userauth_request: invalid user cyrus [preauth] Nov 6 20:15:33 domU-12-31-39-01-7E-8A sshd[4925]: Received disconnect from 210.193.52.113: 11: Bye Bye [preauth] Where "cyrus" is changed by hundreds if not thousands of common names and items. What could this be? Brute force attack or something else malicious? I traced IP to Singapore, and I have no connection to Singapore. May thought is that this was a DoS attack since I lost access and server seemed to stop working. Im not to versed on this, but ideas and solutions for this issue are welcome.

  Read the article

• Can a mapped network drive be reconnected from the command line?

  - by Stephen Jennings

  On a daily basis I find myself in the Windows command prompt needing to access a network drive that is mapped but disconnected. I have yet to find a command that will reconnect this drive without unmapping and remapping (which leads to a password guessing game, since I don't own these computers). I would also like to be able to script this so every night the drive is reconnected if it has become disconnected somehow. The fastest solution I currently have is to: Type "start." to open explorer, Alt-D to focus the address bar, type the drive letter I want and press enter, and wait for it to display the drive contents, then finally, close explorer and go back to the command prompt. I know it's a minor inconvenience, but I'm often doing this through a slow VNC or PCAnywhere connection where doing anything through GUI is awful, so I'm just wondering if there's a better solution.

  Read the article

• How to add network printer remotely without knowing the IP?

  - by Steve

  Assume your friend from over 100km away asked you to add a network printer to his computer since you're so tech savvy. How would you add network printer remotely in this case? You would need: 0. Remote connection to your friend's computer 1. Printer IP and brand/model names 2. Respective drivers downloaded either from manufacturer's website or Windows Update driver Question is, how would you find out the IP address of the printer without bothering your friend too much with technical steps? Since your friend isn't as tech savvy as you - they wouldn't know which buttons to press to get IP address.

  Read the article

• Is it possible to boot from internet?

  - by Calmarius

  Let's assume the following situation: you have a computer with empty hard disk, and you don't have a CD, floppy, pen drive nearby to boot the computer from. But you have connection to the Internet. Modern computers support network booting using PXE, but I haven't found anything regarding booting via the internet. So, is it possible to use PXE to load an image from the internet and boot it? By having a running system (even a minimal Linux) in RAM, it should be possible to install it on the hard disk, and build up a working system from here.

  Read the article

• aptana/eclipse blocks other apps

  - by waquner

  Hi, I've got a fresh win7 installation, the only apps installed so far are aptana (beta 3)/eclipse and firefox + chrome (except antivirus and drivers) Every time I start aptana, chrome and firefox are blocked, so firefox can't load a webpage (or sometimes takes veeeery long) and chrome doesn't even take care of events (so for example hovering over a link doesn't change the cursor and a click does...nothing or typing in an url, press enter - nothing happens) First I thought, aptana downloads something and blocks my internet connection... but IE works well and also there are no signs in the taskmanager (cpu%, network or memory) When I close Aptana, all works as before. I tried updating Java, which didn't help... On my office-computer I use the same apps and it works perfect. Got any ideas? TIA, waquner

  Read the article

• How to turn ON bluetooth in Dell Inspiron?

  - by ykombinator

  I bought a new Dell Inspiron laptop a month ago. The company had pre-installed all the required software in my laptop. As such, the bluetooth used to be switched ON whenever I switched on my machine. However, a few days later, the bluetooth stopped working. I re-started the Laptop and it was ON! Now I am facing this problem very frequently. As such, the wi-fi connection doesn't work unless the bluetooth is switched ON. The bluetooth turns ON after a few re-boots and sometimes doesn't turn ON for many days. Does anybody know any trick to keep the bluetooth ON everytime I switch ON my machine. P.S: The Dell manual did not help.

  Read the article

• Unable to open websites that use HTTPS on linux

  - by negai

  I have the following network configuration: My PC 192.168.1.20/24 uses 192.168.1.1/24 as a gateway. Dlink-2760U router with Local address 192.168.1.1/24 has a VPN connection open with the provider using PPTP. Whenever I'm trying to open some web-sites that has some authorization (e.g. gmail.com, coursera.org), I'm getting a request timeout. This problem is observed mostly on linux (Ubuntu 12.04 and Debian 6.0), while most of such websites work correctly on windows XP. Could you please help me diagnose the problem? Could it be related to NAT + HTTPS? Thanks

  Read the article

• Manage a lot of open ssh sessions to servers with id's for hostname

  - by kimausloos

  Lately I'm working a lot with a few open ssh connections to multiple VPS servers. The hostnames of the servers all follow an ID approach and it's becoming very difficult to know on what machine I'm working with. I was wondering if there is a way to put a name I define somewhere as the title of the terminal. So I would, for example, associate IP 123.123.123.123 with webserver-stg. When opening the connection to the IP, webserver-stg would automaticaly be displayed as the name of the session. Of course I'm not able to change code on the VPS servers, so the solution should be client-side.

  Read the article

• Problem downloading Android SDK?

  - by primehunter326

  So I'm trying to download the Android SDK for Windows from their website but it isn't working. The download seems to proceed without a hitch but something is wrong because the downloaded .zip is only 2-3 MB (size varies), MD5 doesn't match and the file won't open or extract. Obviously the download is corrupt but I have no idea why. A quick google didn't turn up anyone else with this problem to indicate that it might be on the server side. My connection is rock solid and I've never had issues with it so I'm not sure what it could be on my end. I tried downloading the linux version as well and tried using the alternate link, both to no avail. Having recently discovered this amazing community I thought I'd ask here. Any ideas?

  Read the article

• Wireless adapter won't enable

  - by user52141

  I bought a d-link dwa-125, plugged it in and windows recognized it right away and said everything was good to go. But there were no connection options. When I open up the network control panel and have it show me the adapters... the wireless adapter is greyed out and says it is disabled. So I tell it to enable. It says is it enabling, then says it is enabled... but the adapter stayed greyed out saying disabled. I am running 7 x64. I have reinstalled drivers, connected it via lan and had it update drivers.. same problem. It works just fine on any other computer in the house, just not this one.

  Read the article

• cPanel configuration appears to allow unauthenticated SMTP - how to fix?

  - by ttsiodras

  One of my clients is using a cPanel-based Virtual Dedicated Server that appears to allow unauthenticated SMTP: bash$ echo EHLO | nc mail.clientscompany.com 25 ... 250-SIZE 52428800 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS 250 HELP It therefore appears that anyone (esp. spammers) can use his mail server to send whatever - I just connected from my DSL connection at home, and... bash$ nc mail.clientscompany.com 25 HELO clientscompany.com MAIL FROM: [email protected] RCPT TO: [email protected] DATA From: <[email protected]> To: <[email protected]> Date: ... Subject: ... Blah . QUIT I just tested this, and sure enough, it sent a mail from "[email protected]". Since I am not familiar with cPanel and WHM, can someone provide pointers to configure his mail server to (a) only accept TLS connections and (b) only authenticated ones (i.e. with user/password, not just plain connections). Thanks for any help.

  Read the article

• cisco vpn and on demand routing

  - by Chris Lively

  We need to connect to a partner via a Cisco VPN from one of our internal servers. This server is already configured for demand dial routing to a different partner, using windows RRAS. The partner provided us the group authentication credentials and the regular logon credentials. Basically, I need to configure it so that when this server needs to access a specific host it will automatically establish the vpn connection and route that specific traffic to them. How can I do this? I've installed the Cisco VPN Client (5.0.07.0440) on the server and I can open it up and connect. However, I'm stuck on how to configure this to automatically happen.

  Read the article

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• Securing internal data accessed by a website on the big, bad internet

  - by aehiilrs

  A close relative of this question on Stack Overflow: When you have a web site in your DMZ that needs to access production data stored on an internal DB, what strategies do you recommend using to lower the risks that come from accessing live data? Is it even considered acceptable to have a connection initiated from the DMZ come inside of your network? An extra detail about the nature of the site that kind of throws a monkey wrench into the machinery is that people using the web site will be competing for "spots" on a first-come, first-serve basis with others using the internal software. Because of this, as close to zero lag time between the two applications as possible is ideal.

  Read the article

• XP SP3 PRO - Delayed write failed $mft- can I get which particular file caused the problem ?

  - by user35020

  Hi - I sometimes get that error when resuming from hibernation : Delayed Write Failed : Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, a usb external drive) which was plugged in when I hibernated was not read at the right moment - or sometimes I simply forgot to plug it when resuming from hibernation. My question is : is there any way to see which particular file/folder/folder status/don't know what failed to be written ? Hard drive functions correctly before and after - no problem. Is there a detailed log someplace or a utility ? Searched and searched but nothing. Thanks for any help !

  Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >