Search Results

Search found 22036 results on 882 pages for 'vpn service'.

Page 453/882 | < Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >

  • Apache httpd LDAP integration

    - by David W.
    I am configuring a CollabNet Subversion integration. I have the following collabnet_subversion.conf file: <Location /svn> DAV svn SVNParentPath /mnt/svn/new_repos SVNListParentPath on AuthName "VegiBanc Source Repository" AuthType basic AuthzLDAPAuthoritative off AuthBasicProvider ldap AuthLDAPURL ldap://ldap.vegibanc.com/dc=vegibanc,dc=com?sAMAccountName" NONE AuthLDAPBindDN "CN=SVN-Admin,OU=Service Accounts,OU=VegiBanc Users,OU=vegibanc,DC=vegibanc,DC=com" AuthLDAPBindPassword "swordfish" </Location> This works great. Any user in our Active Directory can access our Subversion repository. Now, I want to limit this to only people in the Active Directory group Development: <Location /svn> DAV svn SVNParentPath /mnt/svn/new_repos SVNListParentPath on AuthName "VegiBanc Source Repository" AuthType basic AuthzLDAPAuthoritative off AuthBasicProvider ldap AuthLDAPURL ldap://ldap.vegibanc.com/dc=vegibanc,dc=com?sAMAccountName" NONE AuthLDAPBindDN "CN=SVN-Admin,OU=Service Accounts,OU=VegiBanc Users,OU=VegiBanc,DC=vegibanc,DC=com" AuthLDAPBindPassword "swordfish" Require ldap-group CN=Development OU=Security Groups OU=VegiBanc, dc=vegibanc, dc=com </Location> I added Require ldap-group, but now no one can log in. I have LogLevel set to debug, but all I get is this in my error_log (Single line broken up for easier reading): [Thu Oct 11 13:09:28 2012] [info] [client 10.55.9.45] [6752] vauth_ldap authenticate: user dweintraub authentication failed; URI /svn/ [ldap_search_ext_s() for user failed][Bad search filter] And, I get this in my access_log: 10.55.9.45 - - [11/Oct/2012:13:09:27 -0500] "GET /svn/ HTTP/1.1" 401 401 10.55.9.45 - dweintraub [11/Oct/2012:13:09:28 -0500] "GET /svn/ HTTP/1.1" 500 535 Yes, I am in that group. (Or, at least how can I confirm that just to make sure that's not the issue. I have the SysinternalsSuite ADExplorer. It's where I'm getting all of my info.)

    Read the article

  • Switching from prefork MPM to worker MPM + php-fpm on ubuntu

    - by Shane
    All tutorials I found were how to fresh install worker MPM + PHP-FPM, since my wordpress blog's already up and running with prefork MPM, correct me if I'm wrong in the simulated installation process: I'm on ubuntu and according to some tutorials, the following lines would do all the tricks: apt-get install apache2-mpm-worker libapache2-mod-fastcgi php5-fpm php5-gd a2enmod actions fastcgi alias Then you setup configuration in /etc/apache2/conf.d/php5-fpm.conf: <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization </IfModule> After all these, restart: service apache2 restart && service php5-fpm restart Question: 1) Would it cause any down time in the whole process for previously running sites with prefork MPM? 2) Do you have to change any already existent configuration files like php or mysql or apache2(would they take effect immediately after the switch without you doing anything)? 3) I've already have apc up and running, do you have to re-install/re-configure it after the switch? 4) How do you find out if apache2 is working in worker MPM mode as expected? Thanks a lot!

    Read the article

  • Gwibber on Ubuntu doesn't open

    - by Radian
    Gwibber Doesn't open . When I tried to Open it from Command Line I got this error ** (gwibber:3752): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags' ** (gwibber:3752): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags' ** (gwibber:3752): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags' No dbus monitor yet Updating... ERROR:dbus.proxies:Introspect error on com.Gwibber.Service:/com/gwibber/Service: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) Traceback (most recent call last): File "/usr/bin/gwibber", line 67, in client.Client() File "/usr/lib/python2.6/dist-packages/gwibber/client.py", line 447, in init self.w = GwibberClient() File "/usr/lib/python2.6/dist-packages/gwibber/client.py", line 29, in init self.model = gwui.Model() File "/usr/lib/python2.6/dist-packages/gwibber/gwui.py", line 43, in init self.services = json.loads(self.daemon.GetServices()) File "/usr/lib/pymodules/python2.6/dbus/proxies.py", line 68, in call return self._proxy_method(*args, **keywords) File "/usr/lib/pymodules/python2.6/dbus/proxies.py", line 140, in call **keywords) File "/usr/lib/pymodules/python2.6/dbus/connection.py", line 620, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) I tried to remove it and to Install again but It has the same error It was Working probably , then suddenly it didn't

    Read the article

  • 16TB Volumes and SNMP On Windows

    - by John K
    As volumes larger than 16TB became more common, it was recognized that the 32 bit value used to report disk size and usage within the standard "HOST-RESOURCES" MIB in SNMP was not large enough to report the proper disk size. Net-SNMP seems to have addressed this issue by simply manipulating the value of "AllocationUnits" to maintain a 32 bit value for disk utilization (since total disk size/usage is equal to the 32 bit space value times the allocation unit), to allow for the calculation of a volume larger than 8/16TB. Presuming you don't have any reporting interest in the allocation unit, this seems like a fine solution. https://bugzilla.redhat.com/show_bug.cgi?id=654384 Window's built in SNMP service, however, seems to continue to suffer from this error, simply reporting the modulo of the used/assigned disk space, resulting in inaccurate disk size reporting. Is there a way to enable Windows to correctly report disk usage for volumes over 16TB? We attempted to simply install Net-SNMP 5.5 x64 and disable Windows SNMP service entirely, however this unfortunately did not fix our issue. I've seen people in the Cacti community mention simply scripting out a solution. Unfortunately, we're using Observium for quick and basic systems monitoring. If the issue can't be correct on the Window's side, can Observium be made to report custom MIBs?

    Read the article

  • OpenVPN Push DNS Not Working Correctly On Windows

    - by woodsbw
    I currently have OpenVPN server setup on an Ubuntu machine, as well as DNSMasq. I am wanting to push DNS to the client (road warrior setup.) I had the push "dhcp-option DNS x.x.x.x" where x.x.x.x was an open OpenDNS server, for testing, and everything was working when I connected from my Windows client But now that I have DNSMasq setup, and I changed the "dhcp-option DNS x.x.x.x" to the DNSMasq server, but when they client connects it still receives the old, OpenDNS DNS server IP. I'm at a bit of a loss here, I have tried flushing DNS on the client, rebooting the server, and I even grep'd the entire server to see if the OpenDNS IP was in some other config I was missing...it wasn't. One other note, when connect to the VPN and explicitly run nslookup against against the DNSMasq IP, the addresses resolve correctly, so it isn't a DNSMasq issue.

    Read the article

  • VNC Server running on Linux machine to access all the terminals open on the Linux

    - by goldenmean
    I have a Linux Ubuntu(11.10) box at work, on which I open 4 terminals and execute different processes(my code). I run vncserver on this Linux box, so as to access it remotely. When I login to my office Windows PC using vpn, I would like to connect to this office Linux desktop using VNC Client and be able to see all the Linxu desktop which had my 4 open terminals executing the programs. How to use VNC to view Desktop of Linux PC and all the terminals associated to that which I opened to execute my programs?

    Read the article

  • New AD-DC in a new Site is refusing cross-site IPv4 connections

    - by sysadmin1138
    We just added a new Server 2008 (sp2) Domain Controller in a new Site, our first such config. It's over a VPN gateway WAN (10Mbit). Unfortunately it is displaying a strange network symptom. Connections to the SMB ports (TCP/139 and TCP/445) are being actively refused... if the connection is coming in on pure IPv4. If the incoming connection is coming by way of the 6to4 tunnel those connections establish and work just fine. It isn't the Firewall, since this behavior can be replicated with the firewall turned off. Also, it's actually issuing RST packets to connection attempts; something that only happens with a Windows Firewall if there is a service behind a port and the service itself denies access. I doubt it's some firewall device on the wire, since the server this one replaced was running Samba and access to it from our main network functioned just fine. I'm thinking it might have something to do with the Subnet lists in AD Sites & Services, but I'm not sure. We haven't put any IPv6 addresses in there, just v4, and it's the v4 connections that are being denied. Unfortunately, I can't figure this out. We need to be able to talk to this DC from the main campus. Is there some kind of site-based SMB-level filtering going on? I can talk to the DC's on campus just fine, but that's over that v6 tunnel. I don't have access to a regular machine on that remote subnet, which limits my ability to test.

    Read the article

  • Web SMTP Server(foo.com) will not send mail to exchange server which is also(foo.com)

    - by Atom
    I think I understand this problem fully, but I do not know how to approach it or where to go in terms of troubleshooting. I've got my one domain http://foo.com that runs a Zen Cart installation that needs to be able to send emails to users(order confirmation, password reset). This works fine to send to any other domain BUT foo.com. I'm running a locally hosted exchange server that is foo.com, and we can send and receive email just fine. If I run tail -f /usr/local/psa/var/log/maillog I recieve this error: Apr 1 10:08:51 foo qmail-local-handlers[25824]: Handlers Filter before-local for qmail started ... Apr 1 10:08:51 foo qmail-local-handlers[25824]: from= Apr 1 10:08:51 foo qmail-local-handlers[25824]: [email protected] Apr 1 10:08:51 foo qmail-local-handlers[25824]: cannot reinject message to '[email protected]' Apr 1 10:08:51 foo qmail: 1270141731.583139 delivery 32410: failure: This_address_no_longer_accepts_mail./ Apr 1 10:08:51 foo qmail: 1270141731.584098 status: local 0/10 remote 0/20 I understand that the foo.com SMTP service doesn't have any account but the one that is used to authenticate mail being sent, so of course, I understand why it's saying 'this address no longer accepts mail'. My question is, how can I get the foo.com(web) SMTP service to handle emails meant for my exchange server([email protected]) or how do I handle the mail that needs to be sent to our exchange server? Is this something to do with MX records? Thanks in advance A

    Read the article

  • How to troubleshoot Hyper-V VSS writer causing backup failure on Server 2008 R2

    - by Tim Anderson
    I have a Windows Server 2008 R2 machine running Hyper-V. Backups using Windows Server Backup fail with the error: The backup operation that started at '?2011?-?01?-?02T10:37:01.230000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved. I have traced this to a problem with the Hyper-V VSS writer. vssadmin list writers reports: Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {fcf0dd79-d282-4465-88ae-7b6857e055c2} State: [8] Failed Last error: Inconsistent shadow copy However I can't get any further. A few relevant facts: I get the error even if all the VMs are shut down If I disable the Hyper-V VSS Writer by stopping the Hyper-V Management Service backup completes OK There are no errors in the Hyper-V-VMMS application log I tried to set tracing for VSS but can't get any output for some reason. I set the correct registry entries but no trace log is generated. Tim

    Read the article

  • Active directory Kerberos OSX problems

    - by Temotodochi
    I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

    Read the article

  • Are there any negative impact running all services on a single static IP?

    - by Jake
    I need to setup a VPN trunk (with remote branch office location), Video Conference and Web Server on-premise in the office. I am used to ISP providing blocks of 8 or 16 IPs. But I have a new ISP which says they only can provide a single IP. Are there any issues with running all services on a single IP? I don't think this has any thing to do with bandwidth..? I'm not using SSL certificates... I can do port forwarding to different machines... What else...? Disclaimer: I am a programmer by training. Sorry for noob question.

    Read the article

  • Policy Routing with Openvpn?

    - by sadawd
    Dear Everyone I am currently using openvpn for normal browsing. However, I have the following services running: a bit torrent client, a web server, IRC and a git server which I would really want it to not be using my vpn connection (and use my original connection instead). Is there a way to do this? I looked up policy routing and I can't really find any tutorial on how to do this on linux (I am on ubuntu). I don't want the solution to be incredibly complicated - I am pretty new to networking in ubuntu and I only want a very simple solution to this problem. Can someone help me out?

    Read the article

  • Sync clock on Windows XP machine to external (non-domain, non-workgroup) Windows Server 2008 R2 machine

    - by Eric
    I have two machines and I'd like their clocks to be in sync for various reasons. Machine 1 is an XP machine located in the office. Machine 2 is a VPS hosted by a third party running Windows Server 2008 R2. These machines are not in any kind of workgroup or on a domain together. They are completely separate machines. Machine 2 is currently syncing once a week to time.windows.com. The clock on Machine 2 does seem to wander a bit within that week interval. What I would like to do is have Machine 1 set its clock based on the clock of Machine 2. I have tried configuring w32tm on the XP machine. This is what I used for configuration: w32tm /config /syncfromflags:manual /manualpeerlist:"<ip address of machine 2>" However, whenever I issue the /resync command I get "The computer did not resync because no time data was available". I have made sure to start the windows time service on machine 2, and I have added firewall exceptions for UDP port 123. Is there something I need to configure on Machine 2 (other than just starting the time service) in order to get it to respond? Edit: I have also run w32tm /config /reliable:YES /update on Machine 2. I am still getting "The computer did not resync because no time data was available". Is there something else I'm missing?

    Read the article

  • PostgreSQL failover cluster on Windows Server

    - by user36997
    We are looking for advice on how to setup a basic failover cluster for our application: We will be using 4 machines running Microsoft Windows Server (most probably 2003). All four will always run our application, which is essentially a web service. Load balancing is "outsourced" - somebody else handles the distribution of the web requests among the servers. Only one of the servers will be running the PostgreSQL server actively at any given time. Another server (of the four) also has the DB installed, but is on standby/passive. The DB data is stored on shared storage. No copying data between servers. Reads are done very frequently by many end-users, and in rather small chunks of data. Writes are done much less frequently, by less users, and in very large bulks of data. Now, how can one configure Microsoft Cluster Service to keep only one instance of the DB server and 4 instances (1 per server) of our application at all times? And does PostgreSQL integrate neatly with MSCS at all? Update: Instead of keeping the data on shared storage, I also consider using log shipping to replicate data on a couple of DB servers. There are two issues with this option: Log shipping only makes sure that I have a second server that gets all of the data and is ready to take over. How do I implement the actual failure detection and failover switch? Switching back: Suppose the master fails and the system automatically fails over to the slave, and later the master comes back online. I understand that with WAL shipping this will require to reconfigure the log shipping once again, and that switching back is far from seamless. Is that so?

    Read the article

  • Choosing between cloud (Cloudfoundry ) and virtual servers - for developers

    - by Mike Z
    I just came across some articles on how to setup your own cloud using Cloudfoundry and Ubuntu, this got me thinking, choosing our infrastructure, if we want to use our own servers what's the advantage of cloud on virtual servers vs just using virtual servers, VPN? If we now develop for the cloud later if we need help we can quickly move on to a cloud provider, but other than that what's the advantage and disadvantage of private cloud in these areas? speed of development, testing, deployment server management security having an extra layer (cloud) will that have a hit on server performance, how big? any other advantage/disadvantage?

    Read the article

  • Bandwidth sizing for simultaneous RDP sessions

    - by Gareth Marlow
    We're doing some DR scenario planning which will require up to 150 users to RDP into their desktop machines (mainly running Windows XP) over our VPN. We have a 2mbit uncontended internet connection at the moment but there's scope to upgrade this and also to use a secondary SDSL line to give us more bandwidth. Typical bandwidth figures I've seen suggest to plan for 64kbps per session, which works out to 9.6mbps in total. I'd like to know: Does anyone have any real-world data which would support these estimates? Are there any operational 'gotcha's that we need to be aware of? Thanks!

    Read the article

  • How to stop/kill a virtual machine that hangs in "Stopping" state?

    - by SvetP
    Hi, I have a virtual machine that constantly hangs in the “Stopping” state. I’ve red several posts suggesting killing the vmwp.exe process of the machine but I’ve never been able to kill this process neither from the Windows Task Manager nor from an administrative command prompt by using prockill /PID xxxx /F where xxxx was the process ID. The only result that I have is that my machine enters in “Stopping-Critical” state. Even worse, from that point (having a virtual machine hung at stopping) I am unable to manage (stop or start) any other virtual machine on the same host. The only “solution” in that case for me is to stop the Virtual Machine Management Service (vmms.exe) and to restart the physical host. Without first stopping the vmms.exe service my physical host also hangs during the restart. Moreover, there is no any error logged in the Event Viewer. I’ve found some other posts complaining about them problem. On all of them the only suggestion was to kill the vmwp.exe process, which obviously doesn’t work for them too. Can somebody help us with this, pls? Thanks

    Read the article

  • Connection drops while transferring large files to one server on a network

    - by Charlotte
    My company has two sites, each with their own LAN, using site to site VPN tunnel to connect the two sites. When transferring files (especially larger files) from site1 to site2 server1, the file transfer fails. I don't think this can be a VPN issue because transferring the same files to site2 server2 which is on the same network as server1 works fine. Pings to server1 and server2 at site2 from site1 are about the same, mostly 19/20ms with the odd one up to 50ms. As server1 is DB server with a high load I thought the NIC maybe overloaded, but a transfer from site2 server1 to site2 server2 works fine, and that uses the same NIC on server1 as transfers from site1 to site2 server1. The servers are both Windows Server 2003 VMs with VMXNET 3 NICs. Site2 Server1 route print: IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 28 9b ...... vmxnet3 Ethernet Adapter #2 0x10004 ...00 50 56 99 18 97 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.18 10 10.10.10.0 255.255.255.0 10.10.10.70 10.10.10.70 10 10.10.10.70 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.18 172.20.10.18 10 172.20.10.18 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.18 172.20.10.18 10 224.0.0.0 240.0.0.0 10.10.10.70 10.10.10.70 10 224.0.0.0 240.0.0.0 172.20.10.18 172.20.10.18 10 255.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 1 255.255.255.255 255.255.255.255 172.20.10.18 172.20.10.18 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site2 Server2 route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 15 00 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.114 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.114 172.20.10.114 10 172.20.10.114 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.114 172.20.10.114 10 224.0.0.0 240.0.0.0 172.20.10.114 172.20.10.114 10 255.255.255.255 255.255.255.255 172.20.10.114 172.20.10.114 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site1 Server route print: =========================================================================== Interface List 14...00 50 56 93 00 0b ......vmxnet3 Ethernet Adapter #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.168.1 192.168.168.118 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.168.0 255.255.255.0 On-link 192.168.168.118 261 192.168.168.118 255.255.255.255 On-link 192.168.168.118 261 192.168.168.255 255.255.255.255 On-link 192.168.168.118 261 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.168.118 261 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.168.118 261 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.168.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 261 fe80::/64 On-link 14 261 fe80::3c6b:996f:ef36:ee76/128 On-link 1 306 ff00::/8 On-link 14 261 ff00::/8 On-link =========================================================================== Persistent Routes: None tracert from site1 to site2 server1: Tracing route to server1 [172.20.10.18] over a maximum of 30 hops: 1 19 ms 19 ms 19 ms server1 [172.20.10.18] Trace complete. tracert from site2 server1 to site1: When this was run it went to the external IP of site2, then to a couple of external ips of the isp, then times out. Can anyone suggest any troubleshooting steps? Thanks, Charlotte.

    Read the article

  • Optimum configuration of McAfee for Servers

    - by Wayne Arthurton
    Our corporate standard is McAfee Enterprise, unfortunately this is non-negotiable. On two types of servers I'm responsible for, SQL & Web, we have noticed major performance issues with the corporate standard setup. Max scan time 45sec One policy for all processes Scan ALL files on write, read and open for backup Heuristics: Find unknown programs, trojans and macros Detect unwanted programs Exclude: EVT, LDF, LOG, MDF, VMD, , windows file protection) This of course still causes major slowdowns. IIS .NET recompiles are slow especially with SharePoint, SQL backups and restores, SQL Analysis Services, Integration Services and temp data from them as well. I have looked from time to time, for some best practices on setting up McAfee of SQL & SQL Analysis Service, SQL Integration Service, Visual Studio, Sharepoint, and .NET web servers in general. How do people setup McAfee enterprise on their corporate serves keeping security intact, but affecting performance as minimally as possible? Has anyone run across white papers on these setups? Obviously some are case by case, but there must be some best practices out there somewhere.

    Read the article

  • Avoiding DNS timeouts when a dns server fails

    - by Neil Katin
    We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

    Read the article

  • Filesystem access through web interface

    - by Jorge Suárez de Lis
    I have an SSH+Samba server so people can access its files from anywhere on the network. I thought it would be also interesting to provide access through a web interface, so they can access the files even when they don't have access to the VPN or a Samba/SSH client. Something like the Ubuntu One or Dropbox web interface. The http server could be on the same machine as the SSH+Samba, so it should just provide access to local files and some way to login with their username/password. Someone knows any software like this?

    Read the article

  • Invalid Parameter on node puppet

    - by chandank
    I am getting an error of err: Could not retrieve catalog from remote server: Error 400 on SERVER: Invalid parameter port at /etc/puppet/manifests/nodes/node.pp:652 on node test-puppet My puppet class: (The Line 652 at node.pp) node 'test-puppet' { class { 'syslog_ng': host => "newhost", ip => "192.168.1.10", port => "1999", logfile => "/var/log/test.log", } } On the module side class syslog_ng::config ( $host , $ip , $port, $logfile){ file {'/etc/syslog-ng/syslog-ng.conf': ensure => present, owner => 'root', group => 'root', content => template('syslog-ng/syslog-ng.conf.erb'), notify => Service['syslog-ng'], require => Class['syslog_ng::install'], } file {"/etc/syslog-ng/conf/${host}.conf": ensure => present, owner => 'root', group => 'root', notify => Service['syslog-ng'], content => template("syslog-ng/${host}.conf.erb"), require => Class['syslog_ng::install'], } } I think I am doing it as per the puppet documentation.

    Read the article

  • Uninstall IIS on Windows 7

    - by CJM
    I've just rebuilt my development machine and installed IIS. I then installed the Web Deployment tool and used this to restore my previously-backed-up websites to the clean machine. Unfortunately the restoration didn't work correctly/fully. I couldn't easily correct the problem, so I decided to uninstall/reinstall IIS and recreate the sites manually. I uninstalled IIS and rebooted, but there was still plenty of stuff left around such as various files in /windows/system32/inetsrv/ which I tried to delete manually (with limited success!). I rebooted again and tried to reinstall IIS - it reported an error (no meaningful message) and requested another reboot. The event log includes the following errors: The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/gallery for site 1. The site has been disabled. and Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. I'd like to avoid another rebuild. Can I completely remove IIS, such that I can reinstall it from scratch? Or can I 'fix' the current setup so that IIS will reinstall over what is already there?

    Read the article

  • Howto return to virtual machine when remote desktop hangs?

    - by tangens
    I'm using a vmware virtual machine running ubuntu linux and from there I connect to a Windows XP machine using rdesktop through a VPN tunnel. This configuration is given and cannot be changed. From time to time my internet connection does a reconnect. Then the running rdesktop (running in fullscreen mode) process freezes and isn't usable anymore. Now I want to return to the underlying linux and restart the rdesktop process. But I'm not able to get out of fullscreen rdesktop mode and so I cannot access the ubuntu desktop to kill any process. My solution is to reboot the vmware and start the rdesktop again. Is there a better way to get the configuration running again after a freeze? EDIT: I have no admin rights for the linux system. Everything must be done with user rights.

    Read the article

  • SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    - by g18c
    I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

    Read the article

< Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >