Search Results

Search found 22036 results on 882 pages for 'vpn service'.

Page 454/882 | < Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >

• Sonicwall TZ210 - Set up public wifi on separate subnet & interface

  - by thomasjbarrett

  I want to set up a public wifi by connecting another router to the X6 interface, and put it on a separate subnet (192.168.10.0/24) & in the DMZ Zone to keep it away from the regular LAN. I believe I have the network settings correct: the router has acquired the IP and DNS information from the TZ210, and the TZ210 shows it as an active DHCP lease. X6 is in the DMZ. I now have a routing/NAT/firewall problem, since I can't get any traffic to travel from the subnet to the internet. I can't get to any external websites and can't ping the TZ210 from the subnet. X0 is the regular LAN, and X1 is the WAN. Looking for any tips or tutorials on this. Here's my current relevant rules: Routing Source: X6 Subnet Destination: Any Service: Any Gateway: Default Gateway Interface: X6 Source: Any Destination: X6 Subnet Service: Any Gateway: 0.0.0.0 Interface: X6 NAT Policies Source Original: Any Translated: WAN IP Destination Original: Any Translated: Original Inbound: X6 Outbound: X1 Source Original: Any Translated: U0 IP Destination Original: Any Translated: Original Inbound: X6 Outbound: U0 Firewall DMZ LAN : Deny All DMZ WAN : Allow All LAN DMZ : Allow All WAN DMZ : Allow All

  Read the article

• Developer Laptop with SQL Server 2008 can't login to SSIS when offsite

  - by wizlb

  When I bring my Windows XP (SP3) laptop home I can still login as my domain account because Windows caches the info necessary to authenticate me when the domain controller isn't around. However, when I try to connect to Integration Services from within SQL Server Management Studio, it generates SSPI context errors. The only way it works is if I connect to the office with VPN or if I'm at the office where the domain controller is. I have both SQL Server Agent and SQL Server Integration Services 10 running under local computer accounts. It seems that the only option to connect to Integration Services from within Management Studio is to use Window authentication. Is there any way to do this when I'm not connected to the office? Why don't these services use the cached info just like Windows Login? Thanks.

  Read the article

• Cannot resolve Hostname to IP, but IP to hostname works

  - by dotnetdev

  I have deployed a bunch of windows server VMs on a cloud hosting service. These machines are all joined to a domain controller on the same service, which also hosts DNS. All of the domain-joined machines have dynamic IP (along with the DC). If I try to resolve any of the hostnames remotely, it fails. For example, I am in SQL Server Reporting Services and I need to connect to a remote server. I provide the hostname of the desired target server and this fails, but then if I provide the IP, this works. How can I pass the hostname and have this resolve to IP? Is there anything I need to look for in the DNS server? It has records of the hostnames (in forward lookup I think), but reverse is empty. Isn't it the case that forward lookup resolves ip to hostname and reverse resolves hostname to ip? Also, I don't know what he subnet mask because this is not in my control, so the machines may not be in the same subnet - can this be a cause of the problem? Where is the problem? Thanks

  Read the article

• Windows 7 offline files - work temporarily offline even if network connection works

  - by Robert

  Sometimes I am connected via VPN to a network containing the server where files are stored which are cached by Windows offline files feature. Sometimes the connection works good and working this way is not a problem - on other times working is quite a pain because of high latency when working with the files in the Windows explorer. Is there an interactive way how a user (with admin permissions) can temporary suspend online usage of offline files? I already activated the "Transparent caching" group policy feature (Computer Configuration Policies Administrative Templates Networks Offline Files) with a network latency of 200msec but from my experience even if I get ping times to the file server of less than 40msec online usage is quite tenacious. Setting low latency times at this point causes the offline files often to toggle which makes problems with some applications working with several files and requires them to be consistent (like SVN client).

  Read the article

• Cannot connect to FTP sites anymore

  - by Wayne M

  I have the FTP service running on Server 2003, and I am hosting websites through Apache. I have users configured to point to certain directories on the server. I am using FileZilla to remote FTP, but it never seems to connect to the directory. The command window says: Command: USER wayne Response: 331 Password required for wayne Command: PASS: ***** Response: 230 User wayne logged in Status: Connected Status: Retrieving directory isting... Command: PWD Response: 257 "/wayne" is current directory Command: TYPE I Response: 200 Type set to I. Command: PASV And that's it. It doesn't display any directories at all, and the pane says "Not connected to any server". Sometimes it will display the folder, but nothing happens when I click on it to expand it. It was working fine, and I have another FTP server set up the same way that does work. How can I fix this? EDIT: I've tried changing it to Active FTP, and it says: Command: LIST Command: 150 Opening BINARY mode data connection for /bin/ls Response: 425 Can't open data connection. Error: Failed to retrieve directory listing. I also noticed that I'm not able to browse the site in IIS's management console anymore, it just shows a blank screen when I click on one of the names and says There are no items to show in this view, although the name has permissions to view the folder and everything. Could it be because I have the Web Publishing service disabled (as I'm not using IIS to host websites)? That shouldn't cause anything should it?

  Read the article

• Can't the NetworkManager applet to appear in the Gnome panel in Ubuntu

  - by Nate

  I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

  Read the article

• Can't the NetworkManager applet to appear in the Gnome panel in Ubuntu

  - by Nate

  I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

  Read the article

• Xvnc4 started from xinetd only displays empty gray X screen

  - by scott8035

  I'm attempting to setup an Ubuntu 10.10 box so that anyone can connect to port 5900 and be greeted by the gdm login manager. To do so, I added a vnc entry in /etc/services and I am starting Xvnc4 using this xinetd config file: service vnc { protocol = tcp socket_type = stream wait = no user = nobody server = /usr/bin/Xvnc server_args = -geometry 1000x700 -depth 24 -broadcast -inetd -once -securitytypes None } This kind of works...I can start multiple sessions all to port 5900, and I get an X screen. The problem is that I only get an empty, gray X screen with no applications started. I know when you run vncserver from the command line it will look to your ~/.vnc/ directory for your passwd and xstartup files, and I think what I want to do is put "gnome-session" into the xstart file. However, which xstartup file? The running user is "nobody" who obviously doesn't have a ~/.vnc/ directory. I tried a /root/.vnc/xstartup file and a ~scott/.vnc/xstartup file and it doesn't look like they were even read. I changed the xinetd vnc service so that it would "strace" Xvnc4. I looked thru all the "open" lines and didn't get a clue as to what file it was trying to read for xstart. Can anyone help? I just want a terminal server where the user is presented with a gdm login screen.

  Read the article

• 2nd instance of mysql closes/doesnt start no warnings/errors?

  - by acidzombie24

  I have an external HD and i'd like to run a 2nd mysql instance on it. I used the windows installer to install/configure mysqld as a service on windows7. I took the my.ini from C:\Program Files\MySQL\MySQL Server 5.5\my.ini Then edited the port (client and mysqld), datadir and innodb_data_home_dir. After running this command "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --defaults-file="f:/dev/my.ini" I found an error which was all about the innodb_data_home_dir directory not existing. After that I ran the command again. Mysqld simply starts up for a second then immediately closes. I see no message in my command prompt. I know this command line args are correct as i see the mysqld service using the same one except a different my.ini path. Also it did tell me about the directory not existing so i know it is reading the new ini file. How do i figure out why this 2nd instance of mysqld is closing? How do i get 2 instance running? I'm using v 5.5

  Read the article

• Widespread misinterpretation of DNS rules in resolving wildcards

  - by Dominic Sayers

  [EDITED to add: This problem has gone away on its own. I believe Cloudflare's name resolution may have been to blame. See my own answer below] Here is a snippet of my zone file *.example.com. 300 IN CNAME proxy.herokuapp.com. foo.example.com. 300 IN A 111.111.111.111 If I dig @8.8.8.8 foo.example.com I get the answer I expect: ;; ANSWER SECTION: foo.example.com. 30 IN A 111.111.111.111 The same is true of all other public DNS servers I've tried. However, when I try to set up a check with Pingdom to a URL on foo.example.com it instead sends the traffic to my Heroku app referenced by the *.example.com RR. The same is true of checks set up on New Relic, Errplane and traffic generated by the Heroku app itself. So on the one side, all public DNS servers interpret the zone file one way. Yet four service providers all interpret it a different way, one that differs to the standard suggested by RFC 4592. My question is: are these reputable, mature service providers all wrong? Or is it little me?

  Read the article

• esxi change MKS port

  - by Daniel Powell

  I need to connect to my home esxi box over the web however I cannot use the default port 902 for the console viewer due to firewall restrictions. Is there a way to change this port somewhere even if i can just do some nat and redirect any other port to that port? I've had a look around and when I try to connect to the esxi server in vSphere client I cant find anywhere I can specify the port. I know this is not the recommended way to do this but its a testing server and security is not an absolute must on this box. I also cannot setup a vpn to this box.

  Read the article

• Microsoft Entourage/Exchange Server problem: all objects disappeared from server - still in some for

  - by splattne

  One of our employees works with Entourage on his MacBook Pro (OSX 10.6) accessing Exchange Server 2007. Last Friday morning, I think while working over a VPN, Entourage (I think it was Entourage) deleted all his objects (mail, calendar, contacts) on the server and while creating a lot of strange folders (starting with underscores) on the client. The local data seems to be there, but not in a consistent form. Since the user's mailbox is rather big, I suspect, that there was some kind of "move" operation which did not complete. I tried to export the data, but the export stops because of a corrupted object. Is there a tool or another way to export or retrieve the local data? Edit - FYI: we solved the problem getting his data from the previous night's backup.

  Read the article

• Sharing files from Ubuntu to Mac

  - by seengee

  Hi, Running Ubuntu 10.04 in one office and we want a couple of Mac's in another office to be able to connect to shares on this computer. Want a fairly simple solution to this if one exists. Started looking at setting up a VPN using PPTP but it seems quite complicated. Also seen mention of VNC but this seems more related to sharing desktops and all i want to do is share a directory. Could i just install open SSH and have the Mac users mount a share over SSH using public/private key encryption?

  Read the article

• How should I monitor memory usage/performance in SunOS/Solaris?

  - by exhuma

  Last week we decided to add some SunOS (uname -a = SunOS bbs-sam-belair 5.10 Generic_127128-11 i86pc i386 i86pc) machines into our running munin instance. First off, the machines are pre-configured appliances, so, I want to avoid touching the system too much without supervision of the service provider. But adding it to munin was fairly easy by writing a small socket-service (if anyone is interested, I put it up on github: https://github.com/munin-monitoring/contrib/tree/master/tools/pypmmn) Yesterday, I implemented/adapted the required plugins for our machines. And here the questions start: First, I have not found a way to determine detailed memory usage values. I get the total memory by running prtconf | grep Memory, and the free memory using vmstat. Fiddling together a munin-plugin, gives me the following graph: This is pretty much uninformative. Compare this to the default plugin for linux nodes which has a lot more detail: Most importantly, this shows me how much memory is actually used by applications. So, first question: Is it possible to get detailed memory information on SunOS with the default system tools (i.e. not using top)? Onto the next puzzle: Seeing the graphs, I noticed activity in the "Paging in/out" graphs, even though the memory graph still has unused memory: Upon further investigation, I found out that df reports that /tmp is mounted on swap. Drilling around on the web, I understood that df will display swap, but in fact, it's mounted as a tmpfs. Now I don't know if this explains the swap activity. The default munin-plugin for solaris uses kstat -p -c misc -m cpu_stat to get these values. I find it already strange that this is using the cpu_stat module. So maybe I simply misinterpret the "paging" graphs? Second question: Do the paging graphs indicate that parts of the memory are paged to disk? Or is the activity caused by file operations in /tmp?

  Read the article

• VirtualBox - Mac OSX host Win7 guest - no Internet access for guest VM

  - by nodelayheehoo

  I have a Mac running OSX 10.9.2, and I just downloaded and installed a Win7 IE9 VM in VirtualBox. My Mac uses Wi-Fi for internet access, and it's behind a proxy (it's a work machine). VirtualBox loads the VM fine, and at some point the VM can see the DNS servers of the host. But I've never been able to make the VM have internet access. I've tried all kinds of combinations of Network settings on the VM via the VirtualBox Settings, in conjunction with Internet Sharing in OSX's System Preferences, but no luck. Has anyone done a similar setup and made the VM successfully connect to the Internet? Thanks in advance for any inputs. [ Update: I was able to get internet access for the VM when the host was using my home network. When I ran the VPN software to connect to the work network, the internet access went away again.] (Initially posted this on stackoverflow.com, but it was put on hold as off-topic by several users, and was advised to ask here instead)

  Read the article

• Unable To Install SQL Server 2008 On Windows 7 & Windows XP

  - by mickburkejnr

  Hi Guys, you are my final hope of salvation! For the last five hours I've been trying to install SQL Server 2008, first on Windows 7 and then Windows XP. Both have had the same issue. Even before the installation starts, an error message appears saying: Microsoft .NET Framework 3.5 SP1 installation has failed. SQL Server 2008 Setup requires .NET Framework 3.5 SP1 to be installed. I have installed everything in the hope of getting past this. the service pack it refers to has even been installed and I can see them in the control panel! I have installed Framework 2.0, Framework 2.0 SP1, Framework 3.5, Framework 3.5 SP1, Windows Installer 3.5 and Windows Installer 4.0. Even installed the Service Pack for SQL Server 2008.... But, nothing, works! Does anyone have an idea what I'm doing wrong or what could be wrong? I'm seriously close to the end of my tether, I've even sent Steve Ballmer an email with my frustration. I would seriously appreciate some help with this. Many thanks!

  Read the article

• OSX Server 3, Mac clients binding to OD and Profile Manager failing

  - by dbf

  I've made a setup containing a Mac Mini with OSX Server 3 (Mavericks 10.9.2) using Open Directory and Profile Manager (Mail, etc all set up and working). Now the thing is, internally on the local network, everything works great. Clients can bind to the OD and the users are able to login. I can install trust and settings profiles (either custom or group profiles) and all services in the profiles mentioned are being configured correctly. I can log in and out, hump around and do it a 100 times on different macs with different users, it works. My goal is to make this service publicly. The domain is with a FQDN which I own, for simplicity let's say server.domain.com. Now the only way for me to bind the clients to the OD is using LDAP mapping RCF2307 (without SSL) and a DN suffix of dc=server,dc=domain,dc=com using the Directory Utility. The options from server, or open directory will throw several errors like Connection failed to node '/LDAPv3/server.domain.com (2100). First of all I don't really understand the problem why clients can't bind to the OD like it does locally, with and without SSL (all ports are open, literally all ports are open, not just 389,636 and 1640, wasn't sure if I was missing any). When the clients are using LDAP mapping RFC2307 to bind (without SSL only), clients are able to authenticate, login and even load the Trust profile. But every Settings profile will fail with a Debug Message: Unable to find GUID in user record OD or fail to install saying missing user identification. Is there any way to get this to work without RFC2307? Because there is quite some stuff missing when using RFC2307 and not pull the mapping from the server or use open directory. Is this setup even possible? Or should I use VPN to authenticate with the OD? The network setup is a Modem/Router (DHCP off) with WAN NATted to an Airport Extreme (Using DHCP+NAT). The AE does notify with a double NAT message but I haven't had any problems with it on any other service. So WAN - 192.168.2.220 (static), AE - 10.0.1.* (dhcp) Output of DIG from the outside using dig server.domain.com ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 77 IN A 91.50.*.* (valid WAN IP) ;; SERVER 172.*.*.1#53(172.*.*.1) (iPhone) DIG locally from a client and server (same output) ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.domain.com. IN A ;; ANSWER SECTION: server.domain.com. 10800 IN A 10.0.1.11 ;; AUTHORITY SECTION: server.domain.com. 10800 IN NS domain.com. (used for email send in relay) server.domain.com. 10800 IN NS server.domain.com. ;; SERVER 10.0.1.11#53(10.0.1.11) Are there any things I should check? Only have OSX. -- double NAT issue, plugged in the server directly on the Modem/Router with a static IP and issue remains. Guess that rules out the double NAT thing. -- changeip -checkhostname comes with There is nothing to change, e.g. success. Primary address = 10.0.1.11 Current HostName = server.domain.com DNS HostName = server.domain.com For now, I've made a workaround by using an admin account that forces a permanent VPN connection on boot. That means before it comes to the login, a connection is already made or underway. I will continue this post when I have more time, also locating all the necessary .log files of each application involved. I have some suspicions but have to debug a bit more when I have more time on my hands .. Unless, of course, I get sidetracked with having a life. Which is arguably not very likely. krypted.com

  Read the article

• Haproxy not properly passing on X-Forwarded-For header

  - by JesseP

  I have backend web servers that receive requests by way of haproxy-nginx-fastcgi. The web app used to see multiple ip's coming through in the X-Forwarded-For header, chained together with commas (most original IP on the left). At some point in the recent past (just noticed, so not sure what caused it) something changed, and now I'm only seeing a single IP passed in the header to my web application. I've tried with haproxy 1.4.21 and 1.4.22 (recent upgrade) with the same behavior. Haproxy has the forwardfor header set: option forwardfor Nginx fastcgi_params config defines this header to be passed to the app: fastcgi_param HTTP_X_FORWARDED_FOR $http_x_forwarded_for; Anyone have any ideas on what might be going wrong here? EDIT: I just started logging the $http_x_forwarded_for variable in nginx logs, and nginx is only ever seeing a single IP, which shouldn't ever be the case, as we should always see our haproxy ip added in there, right? So, issue must either be in nginx handling of the variable coming in, or haproxy not building it properly. I'll keep digging... EDIT #2: I enabled request and response header logging in HAProxy, and it is not spitting anything out for X-Forwarded-For, which seems very odd: Oct 10 10:49:01 newark-lb1 haproxy[19989]: 66.87.95.74:47497 [10/Oct/2012:10:49:01.467] http service/newark2 0/0/0/16/40 301 574 - - ---- 4/4/3/0/0 0/0 {} {} "GET /2zi HTTP/1.1" O Here are the options i set for this in my frontend: mode http option httplog capture request header X-Forwarded-For len 25 capture response header X-Forwarded-For len 25 option httpclose option forwardfor EDIT #3: It really seems like haproxy is munging the header and just passing on a single one to the backend. This is fairly impacting to our production service, so if anyone has an ideas it would be greatly appreciated. I'm stumped... :(

  Read the article

• Howto print from dumb terminals with local print server and remote hosted RDP

  - by Matt

  We have essentially a remote office with about 5 dumb terminals. The terminals are connecting to our office directly over a wireless link. What I want to do is connect all their printers onto a print server. But since the remote office is not actually allowed to see our LAN (since they are actually another company) we don't want a full on open VPN tunnel set up. Naturally the RDP traffic passes through a firewall. Is there an easy way to set up the RDP server so that it can see a print server on a remote LAN?

  Read the article

• Error installing Network driver

  - by Simon Carpentier

  I'm tring to install NetLimiter 3 (3.0.0.10, x64) on my Windows 7 x64 machine. At the driver installation step, I'm getting an error: Error 0x8004a029: Couldn't install the network component. (InstallNdisIMDriver) UPDATE 2010-09-20: I received a response to my support request: Hi Simon, It seems that problem is rather on your system than in NL3. Too many networking applications (VPN, Virtual computers) are installed on your machine and they are preventing NL3 from proper installation. In order to install NetLimiter 3, try to disable/temporarily remove these apps. Several users had the same problem and shuffling with adapter and networking software helped them. Please, let us know which action helps you (if any). Sincerely, Jan Bilek Any thoughts on this?

  Read the article

• Samba networking with a domain-joined computer

  - by MCS

  I have two computers connected to the same linksys router - one running Ubuntu 8.04 and one running Windows 7. The Windows computer is part of a work domain (when connected via VPN). I'm trying to also create a home network so I can access the linux server from Windows. From what I understand, I have to first create a Windows workgroup and then configure Samba on linux to join the Windows network. So in Windows, I went to Control Panel - Network and Internet - HomeGroup and got the following message: There is currently no homegroup on your network. Because this computer also belongs to a domain, you can't create your own homegroup, but can join one created by someone on your network. Can I use Samba to create a homegroup? Is there any other way to create a Windows workgroup? Or am I barking up the wrong tree completely?

  Read the article

• How to make working TFTP server on CentOS 6.2

  - by Dima

  I'm trying to setup TFTP server on CentOS 6.2. The /etc/xinet.d/tftp configuration file is the following: service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -s /tftpboot -vvv per_source = 11 cps = 100 2 flags = IPv4 } The selinux and firewall are disabled. The /etc/hosts.allow and /etc/hosts.deny files are empty. When I'm trying to get a file from the TFTP server, the file transfer always failed and I see the following errors into /var/log/messages Jul 11 03:16:53 localhost xinetd[4155]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Jul 11 03:16:53 localhost xinetd[4155]: Started working: 1 available service Jul 11 03:17:00 localhost xinetd[4155]: START: tftp pid=4157 from=192.168.10.3 Jul 11 03:17:00 localhost in.tftpd[4158]: RRQ from 192.168.10.3 filename 1 Jul 11 03:17:00 localhost in.tftpd[4158]: sending NAK (0, Permission denied) to 192.168.10.3 Jul 11 03:17:01 localhost in.tftpd[4159]: RRQ from 192.168.10.3 filename 1 Jul 11 03:17:01 localhost in.tftpd[4159]: sending NAK (0, Permission denied) to 192.168.10.3 Jul 11 03:17:03 localhost in.tftpd[4160]: RRQ from 192.168.10.3 filename 1 The tftpboot directory permissions are (output of the ls -l command): drw-rw-rw-. 3 root root 4096 Jul 11 03:32 tftpboot I also see that the tftpboot directory is shown (by ls -l) with green background (unlike other files/directories) (Why? As I know the green background is for sticky bit only). What I did wrong? How can I make TFTP server working?

  Read the article

• Why is SMF manifest losing configuration data when exported on SmartOS?

  - by Scott Lowe

  I'm running a server process under SMF (Server Management Facility) on Joyent's Base64 1.8.1 SmartOS image. For those not aqauinted with SmartOS, it is a cloud-based distribution of IllumOS with KVM. But essentially it is like Solaris and inherits from OpenSolaris. So even if you've not used SmartOS, I'm hoping to tap into some Solaris knowledge on ServerFault. My issue is that I want an unprivileged user to be allowed to restart a service that they own. I have worked out how to do that by using RBAC and adding an authorisation to /etc/security/auth_attr and associating that authorisation with my user. I then added the following to my SMF manifest for the service: <property_group name='general' type='framework'> <!-- Allow to be restarted--> <propval name='action_authorization' type='astring' value='solaris.smf.manage.my-server-process' /> <!-- Allow to be started and stopped --> <propval name='value_authorization' type='astring' value='solaris.smf.manage.my-server-process' /> </property_group> And this works well when imported. My unprivileged user is allowed to restart, start and stop its own server process (this is for automated code deployments). However, if I export the SMF manifest, this configuration data is gone... all I see in that section is this: <property_group name='general' type='framework'> <property name='action_authorization' type='astring'/> <property name='value_authorization' type='astring'/> </property_group> Does anybody know why this is happening? Is my syntax wrong, or am I simply not using SMF incorrectly?

  Read the article

• Why doesn't the Windows 7 volume mixer remember per-application levels for all applications?

  - by mdives

  If I have the device's master level set to 50, and then lower an application level to 25; Once I close that application and reopen it, the volume levels should persist. The master level should remain at 50 and the application's at 25. This does happen for most applications. However, for one in particular, Napster, it does not. I subscribe to Napster's streaming service. I use the Napster desktop application to connect to that service. Every time that I open the Napster app, I have to adjust the application's volume level down in the volume mixer. When I open the app again after closing it, I have to do the same thing, the volume mixer is not remembering the set level. In fact. The level is reset back to 50, the same level as the device's master level. Has anyone else experienced this, with Napster or any other application? Is there a solution or is this a known issue?

  Read the article

• Postfix does not work after setting server hostname from plesk

  - by Michael

  I have recently set my server hostname from localhost.localdomain to xx.mydomain.com from the plesk control panel. However after doing this change postfix has stopped working, I tried restarting and regenerating the config files but to no avail. I am not familiar with postfix but I believe there is a setting to be changed in main.cf. Here are the relevant errors I receive: postfix/postfix-script: starting the Postfix mail system postfix/master: daemon started -- version 2.8.4, configuration /etc/postfix postfix/cleanup: fatal: host/service localhost/12768 not found: Name or service not known postfix/pickup: warning: maildrop/E5559996219: error writing 4FA2C996217: queue file write error postfix/master: warning: process /usr/libexec/postfix/cleanup pid 15334 exit status 1 postfix/master: warning: /usr/libexec/postfix/cleanup: bad command startup -- throttling Any ideas? EDIT Setting it back to localhost.localdomain makes it work again. The only references to localhost/12768 I can find in main.cf are: smtpd_milters = inet:localhost:12768 non_smtpd_milters = inet:localhost:12768 Should something be changed here? These two lines stay the same when I change the hostname. EDIT If I comment out the two mail filter lines (the ones shown above) and restart, postfix works with the new hostname. However this is obviously not the ideal solution...

  Read the article

< Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >