Search Results

Search found 46352 results on 1855 pages for 'super nathan'.

Page 457/1855 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• Has the hardware in my modem gone bad?

  - by Tyler Scott

  I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

  Read the article

• multiple ssh aliases is selecting wrong user when forwarding

  - by Chris Beck

  I'm following the dual identity procedure for bitbucket: I have 2 bitbucket accounts ccmcbeck and chrisbeck. The former is personal, the latter is work. On my local Mac, I have this in my ~/.ssh/config Host *.work.com User chris ForwardAgent yes IdentityFile ~/.ssh/work_dsa Host bitbucket-personal HostName bitbucket.org User ccmcbeck ForwardAgent no IdentityFile ~/.ssh/bitbucket_ccmcbeck_rsa Host bitbucket-work HostName bitbucket.org User chrisbeck ForwardAgent no IdentityFile ~/.ssh/bitbucket_chrisbeck_rsa On my local Mac I ssh -T all is good, I get: $ ssh -T git@bitbucket-personal logged in as ccmcbeck. $ ssh -T git@bitbucket-work logged in as chrisbeck. On my local Mac, the ssh version is OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 When I ssh foo.work.com to my Linux box, I get: $ ssh-add -l 1024 ... /Users/chris/.ssh/work_dsa (DSA) 2048 ... /Users/chris/.ssh/bitbucket_ccmcbeck_rsa (RSA) 2048 ... /Users/chris/.ssh/bitbucket_chrisbeck_rsa (RSA) On foo.work.com, I also have this in my ~/.ssh/config Host bitbucket-personal HostName bitbucket.org User ccmcbeck ForwardAgent no IdentityFile ~/.ssh/bitbucket_ccmcbeck_rsa Host bitbucket-work HostName bitbucket.org User chrisbeck ForwardAgent no IdentityFile ~/.ssh/bitbucket_chrisbeck_rsa However, on foo.work.com when I ssh -T, it references the wrong User for git@bitbucket-work $ ssh -T git@bitbucket-personal logged in as ccmcbeck. $ ssh -T git@bitbucket-work logged in as ccmcbeck. On foo.work.com, the ssh version is OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 Why is my configuration causing foo.work.com to reference the wrong User?

  Read the article

• Aero bug in Windows 7

  - by boj

  Have you seen anything like this before? Not always but permanently shows up this strange behaviour. What's the name of that problem? And - ofcoz:) - how can I solve it? I tried: driver update full driver/app unsintall and Lenovo ThingVantage System Update turning aero off (... and everything works fine) monitor driver update (but only generic PNP monitor found) Configuration: Lenovo Thinkpad T400s (was Vista but clean Windows 7 install now) Windows 7 Professional (ENG) Mobile Inter 45 Express (WDDM 1.1) Thanx in advance!

  Read the article

• Switch computer off automatically when the internet is disconnected

  - by Vin

  Is there any free software that will detect the status of internet and shutdown the system when the internet disconnects? Or (more generally) can something run a task when the internet disconnects, and I can route it to shutdown the machine? I am downloading things overnight. But my problem is that sometimes the internet connection will be disconnected in the middle of the night, so there is no point in keeping the system running the rest of the night. So I need to avoid this problem by detecting the net connectivity.

  Read the article

• Application to test a cluster/grid

  - by Mystic

  Is anyone aware of any application (computation + data) that I can download to test an in-house grid middleware that will run on a local cluster. I hope to compare the performance with other available grid systems.

  Read the article

• checking the status of CPU throttling: whether ON or OFF

  - by Gaurish Telang

  I am trying to install the ATLAS BLAS library which recommends that I turn if CPU throttling to do the install. How do I check if my CPU throttling is ON or OFF? I tried the suggestion of Code: ./cpufreq-selector -g performance in the /usr/bin directory as suggested elsewhere in the forum but there was no output and the control returned back to the user. I have searched everywhere but there does not seem to be a way to determine the status of the CPU throttling

  Read the article

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• ffmpeg - creating DNxHD MFX files with alphas

  - by Hugh

  Hi all, I'm struggling with something in FFMpeg at the moment... I'm trying to make DNxHD 1080p/24, 36Mb/s MXF files from a sequence of PNG files. My current command-line is: ffmpeg -y -f image2 -i /tmp/temp.%04d.png -s 1920x1080 -r 24 -vcodec dnxhd -f mxf -pix_fmt rgb32 -b 36Mb /tmp/temp.mxf To which ffmpeg gives me the output: Input #0, image2, from '/tmp/temp.%04d.png': Duration: 00:00:01.60, start: 0.000000, bitrate: N/A Stream #0.0: Video: png, rgb32, 1920x1080, 25 tbr, 25 tbn, 25 tbc Output #0, mxf, to '/tmp/temp.mxf': Stream #0.0: Video: dnxhd, yuv422p, 1920x1080, q=2-31, 36000 kb/s, 90k tbn, 24 tbc Stream mapping: Stream #0.0 -> #0.0 [mxf @ 0x1005800]unsupported video frame rate Could not write header for output file #0 (incorrect codec parameters ?) There are a few things in here that concern me: The output stream is insisting on being yuv422p, which doesn't support alpha. 24fps is an unsupported video frame rate? I've tried 23.976 too, and get the same thing. I then tried the same thing, but writing to a quicktime (still DNxHD, though) with: ffmpeg -y -f image2 -i /tmp/temp.%04d.png -s 1920x1080 -r 24 -vcodec dnxhd -f mov -pix_fmt rgb32 -b 36Mb /tmp/temp.mov This gives me the output: Input #0, image2, from '/tmp/1274263259.28098.%04d.png': Duration: 00:00:01.60, start: 0.000000, bitrate: N/A Stream #0.0: Video: png, rgb32, 1920x1080, 25 tbr, 25 tbn, 25 tbc Output #0, mov, to '/tmp/1274263259.28098.mov': Stream #0.0: Video: dnxhd, yuv422p, 1920x1080, q=2-31, 36000 kb/s, 90k tbn, 24 tbc Stream mapping: Stream #0.0 -> #0.0 Press [q] to stop encoding frame= 39 fps= 9 q=1.0 Lsize= 7177kB time=1.62 bitrate=36180.8kbits/s video:7176kB audio:0kB global headers:0kB muxing overhead 0.013636% Which obviously works, to a certain extent, but still has the issue of being yuv422p, and therefore losing the alpha. If I'm going to QuickTime, then I can get what I need using Shake, but my main aim here is to be able to generate .mxf files. Any thoughts? Thanks

  Read the article

• An easily customizable linux distribution using minimal disk space?

  - by Frank

  I'm looking for a linux distribution that can be easily used to create my own distribution that's the same system with some software installed. So basically I should be able to create an iso which, when installed, will have the linux distribution with my desired installed. More specifically, I plan on installing mysql and a bit of my own software which shouldn't be too big. However, this distribution needs to be extremely small in terms of disk space. The distribution, including mysql should not exceed 100mb. It should, of course still be able to connect to the internet and perform other standard functions. I don't need X/any sort of window manager, and would prefer not to have it since it would increase disk usage. Currently I have tried ttylinux and tiny core linux. I've found that ttylinux, while is extremely small, has almost nothing so that mysql can't even be installed. Tiny core linux, on the other hand is a bit too big. I've found openembedded and linux from scratch, but I would prefer for the install and build process to be much easier. What other distribution would you recommend for my purposes? Minimizing disk usage is the most important, followed by ease of installing and creating the custom distribution.

  Read the article

• USB resets with Ubuntu 9.10

  - by Grumbel

  Since the upgrade to Ubuntu 9.10 I have issues with getting USB device resets on my Maxtor OneTouch USB harddrive: Nov 9 20:54:37 localhost kernel: [32459.100021] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 21:54:37 localhost kernel: [36059.100017] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 23:24:37 localhost kernel: [41459.112025] usb 2-2: reset high speed USB device using ehci_hcd and address 4 The device itself continues to work fine, the resets however wake the device out of its sleep state and thus cause it to spin up, which is very annoying. Interestingly, as the log shows, the resets happen at pretty regular intervals (i.e. one hour or half an hour), not randomly. An USB card reader seems to have the same issues, while another USB harddrive from a different manufactor works fine on the same PC. What could be causing this and how could I fix it?

  Read the article

• Thunderbird confused about EPS attachments

  - by Martin

  Sometimes, when I receive (Thunderbird 2.0.0.23 on OS X 10.5) emails with an EPS attachement sent from Mail OS X 10.4, I cannot open the EPS file. Thunderbird shows me 1 file, that can't be opened with any software but text edit. But, if I forward the email to myself, the forwarded email then has 2 files of the same name. One of the 2 forwarded files can be opened as expected. What can be wrong here?

  Read the article

• Monitor utilities

  - by Adam Davis

  I'm a big fan of good monitor usage, but only currently use a few utilities to help me attain display nirvana across several systems and monitors. Part of this is due to not knowing what's available. Please list one monitor utility that you use and what it does for you per answer, and avoid duplicates - comment on and vote up the existing answers rather than adding a duplicate. Also, if there are existing questions that delve more specifically into one area of monitor utilities link that in a separate answer. -Adam

  Read the article

• Hide user login in Windows XP

  - by Tony Borf

  I added a user account to my Windows XP box. Now this user is only accessing the pc remotely. My question is how can I remove that user from the login welcome screen? In fact how can I eliminate the welcome screen alltogeather and just log into the box automatically from the main user account? Thanks

  Read the article

• How do I paste into the "crosh" terminal in a Chromebook?

  - by David Faux

  I pressed Ctrl + Alt + t while having Chrome open to open a terminal in my Chromebook. How do I paste content into this terminal copied from another tab in Chrome? I have tried Ctrl + v to no avail. I have also tried highlighting text and pasting it via the middle button on my mouse, which failed too. I have also read this article (http://www.servercobra.com/nothing-but-chromebook-for-a-week/) and tried triple clicking my touch pad, but it isn't working for me.

  Read the article

• Boot disc isnt loading on MY system

  - by acidzombie24

  I am trying to update the firmware on my harddisk. I grabbed seagates windows setup tool which didnt boot into the app to update the firmware so I burned their iso image. Their ISO also doesnt boot and i vaguely remember something about windows not recognize my disc because of an EFI thing. It probably has nothing to do with it. Anyways, how do I boot into the disc? I tried going into advance options to boot directly to the disc and i get a blank screen. I can use ctrl+alt+del which reboot the system but other then that its blank and doesnt seem to load anything on the disc. The disc was a 7mb iso burnt using windows 7 built in iso burner (it suggest using it on seagates site). I have no idea what to do. Do any of you guys know what my problem may be? The media is DVD-R

  Read the article

• How to make gVim transparent on Ubuntu 10.10?

  - by trolle3000

  I have a .gvimrc file that works fine on OS X 10.6, but won't work on Ubuntu. It contains a line that reads set transparency=15, and when i run gVim it reports: Error detected while processing /home/user/.gvimrc: line 25: E518: Unknown option: transparency=15 Any ideas to make gVim transparent by default? Chers! The whole .gvimrc file for completion: " Turn on line numbers set number " Change colorscheme colorscheme ir_black " Turns on the tab bar always set showtabline=2 " Number of horizontal lines on the screen set lines=60 " GUI Option to remove the Toolbar (T) set guioptions-=T " Sets the percent transparency set transparency=15

  Read the article

• Xperia handset - cannot send files using bluetooth

  - by Sandeepan Nath

  My friend has a Sony Ericsson Xperia (most probably X8) handset which is an Android based smartphone. He is not able to send files through bluetooth but able to receive. I don't exactly remember the version of Android which he is currently having. He has tried to download and install the required update using the same phone (he has internet connected) from http://www.sonyericsson.com but not able to install it. So, he asked me to help him. Which version of Android do you think he has? Does it seem like he does not have Android 2.1 installed. It is written here (click on Xperia X8) that If your phone already has Android 2.1, you can use your mobile network* or a WiFi connection to download the software. Is it possible that he does not have updated Android and so not able to download? If so, does he need to upgrade to Android 2.1 first? Should it be done by connecting it to a PC?

  Read the article

• Word mergefield wildcard not correctly matching

  - by aZn137

  Hello, Below is my mergefield code: { IF { MERGEFIELD Subs_State } = "GA" "blah blah" "{ IF { MERGEFIELD CEOrgStates } = "GA" "blah blah" ""} "} I'm pulling records from a MS Access db. My goal is to check whether a record has Subs_State field matching "GA", or the CEOrgStates has the word "GA" (some records have stuff like "|FL|CA|GA|CT|KY|" (no quotes)). When I merged the docs, Word doesnt seem to be able to match with the wildcards: If I use and compare "*GA" (fields ending with GA), it works; however, the double wildcards "*GA*" dont seem to work at all. Here are the things I’ve tried: Have data in lowercase, then compare with lowercase Have data in lowercase, convert to and then compare with uppercase Do the opposite of the above 2 with uppercase data Use “*GA*” and “*ga*” (no pipe) Use different delimiters Nothing seems to work with the double wildcard matching. What am I doing wrong? Thanks!

  Read the article

• External hard drive that gets its power supply from the PC.

  - by AngryHacker

  I need an external drive to connect to my MacMini. I've been using an 80gb 2.5 drive in an enclosure and it's fine, but now I need a 1.5TB drive. Unfortunately all the 1.5TB drives I found need a separate power supply. I'd like it to be able to feed its power off the USB drive (just like my 80gb drive does). Does something like that exists?

  Read the article

• Video acceleration problem with Windows 7 games and PPTX files

  - by Jordan 1GT

  I have a Dell xps M1330 which originally ran Vista, but I upgraded to Windows 7. When I try to run a Win 7 game like spider solitaire I receive the following message: The game is running in software rendering mode. Hardware acceleration is either disabled or not supported by your video card driver which could slow down game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on. I confirmed that hardware acceleration is turned on. When I go to Dell's site, I'm told there is no later video driver. When I run the game it runs very choppy. I have a .pptx file which is doing strange things in normal view and I suspect it may be related to the same video acceleration problem.

  Read the article

• What's the difference between filename and ./filename in Linux

  - by justintime

  What is the difference between filename and ./filename - under what circumstances is one preffered to the other

  Read the article

• zip being too nice (osX)

  - by stib

  I use zip to do a regular backup of a local directory onto a remote machine. They don't believe in things like rsync here, so it's the best I can do (?). Here's the script I use echo $(date)>>~/backuplog.txt; if [[ -e /Volumes/backup/ ]]; then cd /Volumes/Non-RAID_Storage/; for file in projects/*; do nice -n 10 zip -vru9 /Volumes/backup/nonRaidStorage.backup.zip "$file" 2>&1 | grep -v "zip info: local extra (21 bytes)">>~/backuplog.txt; done; else echo "backup volume not mounted">>~/backuplog.txt; fi this all works fine, except that zip never uses much CPU, so it seems to be taking longer than it should. It never seems to get above 5%. I tried making it nice -20 but that didn't make any difference. Is it just the network or disc speeds bottlenecking the process or am I doing something wrong?

  Read the article

• Location of the MSDTC tab on windows 7

  - by c0mrade

  I'm following this article http://support.microsoft.com/kb/817066, I'm having trouble finding MSDTC tab on windows 7 can anyone help me ?

  Read the article

• Why does iTunes sometimes loose everything in the library when upgrading?

  - by Rod

  All of my kids have experienced problems at one time or another, when upgrading iTunes on their laptops. The version number doesn't matter, as this has happened for the last couple of years, so the version number has changed. It isn't consistent. What is consistent is sometimes, but not always, after upgrading iTunes, it will have lost all of it's information about the music, podcasts, etc, that it had. And yet if I bring up Windows Explorer, I can find all of it there. It's a pain to have to recover that. The pertinent question is, how do you recover all of the music, podcasts, playlists, etc, that is on the computer, but iTunes doesn't show it in the library? Second, what causes iTunes to do this in the first place?

  Read the article

• Free Download Manager Auto-Upload

  - by concerned_parent

  Does Free Download Manager automatically upload my torrents when I download them? If so, is there a way to prevent it?

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >