Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 459/1036 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

• Clear Linux file system after shutdown / start

  - by user35443

  I have very specific task. I need to clear the desktop, downloads, documents and so on after every shutdown or finish. For example, if anyone downloads something using Google Chrome, he will work with it and then he'll shutdown the computer for next use. And when second user sits for working on the computer, he'll find a clear file system without the data downloaded by the first user. On Windows, I used to work with Returnil Virtual System, but it doesn't have support for Linux. Can anybody tell me if is it possible and, if so, how? I was also thinking of using Wine for this program, but don't think it will be the best idea.

  Read the article

• My cpus are powered down periodically

  - by mgiammarco

  I post here because I am using Ubuntu but this is probably an hardware problem. Since I bought my new setup with AMD Athlon(tm) II X4 635 Processor and asus m4a89td pro/usb3 motherboard with ecc ram I have stuttering on videos. I was using ubuntu 11.10 now ubuntu 12.10. Looking at syslog I have found that periodically (I notice only on videos but it happens always) this thing happens: Mar 6 23:36:42 virtual1 kernel: [28564.375548] smpboot: CPU 1 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.380751] smpboot: CPU 2 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.394947] smpboot: CPU 3 is now offline Mar 6 23:36:48 virtual1 kernel: [28569.917021] smpboot: Booting Node 0 Processor 1 APIC 0x1 Mar 6 23:36:48 virtual1 kernel: [28569.928015] LVT offset 0 assigned for vector 0xf9 Mar 6 23:36:48 virtual1 kernel: [28569.928372] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.928378] perf: IBS APIC setup failed on cpu #1 Mar 6 23:36:48 virtual1 kernel: [28569.931305] process: Switch to broadcast mode on CPU1 Mar 6 23:36:48 virtual1 kernel: [28569.934255] smpboot: Booting Node 0 Processor 2 APIC 0x2 Mar 6 23:36:48 virtual1 kernel: [28569.945554] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.945558] perf: IBS APIC setup failed on cpu #2 Mar 6 23:36:48 virtual1 kernel: [28569.948124] process: Switch to broadcast mode on CPU2 Mar 6 23:36:48 virtual1 kernel: [28569.949644] smpboot: Booting Node 0 Processor 3 APIC 0x3 Mar 6 23:36:48 virtual1 kernel: [28569.960838] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.960840] perf: IBS APIC setup failed on cpu #3 Mar 6 23:36:48 virtual1 kernel: [28569.962953] process: Switch to broadcast mode on CPU3 I have: updated bios; tried all (really) bios options; changed ram; changed psu and cpu cooler; tried 3.8.1 kernel. What can I do now? Please help me! Thanks, Mario

  Read the article

• Ubuntu-Java Installation-Topcoder-“Java not found”

  - by hakuna121

  I realized that this might be the dumbest question here, but being a total beginner as I am, I really couldn't figure it out after trying all kinds of instructions I could found on the web. Specs: Ubuntu 13.04; What I intended to do: check out the Algorithm Competition section, by clicking the second-to-left tab,located on the top-left of the page: http://community.topcoder.com/tc What I got: a pop-up saying Java not found! Java could not be automatically detected on your machine. This page will attempt to automatically install Java and Java Web Start. If the download and installation does not occur automatically, click the link below to go to the Sun website where you can download the latest version of Java. What I did: I followed instructions on this Ubuntu Documentation page: https://help.ubuntu.com/community/Java and installed OpenJDK(Java Runtime Environment/Browser plugin/SDK) through Ubuntu Software Center. Then I rebooted the system, tried the page again. But I still got the java not found pop-up described above. Question: What's missing the get this working? Thank you!

  Read the article

• How do I *temporarily* change the *console* keymap to dvorak?

  - by John Baber

  I type dvorak, but I don't like to confuse other users by having it be a system-wide default. I have a script that runs setxbmap dvorak that I can call when I want dvorak and likewise another script that runs setxbmap us when I want qwerty. For X, that's fine. How do I get this behavior in the real console (Ctrl-Alt-F3)? i.e. how can I change the console keymap to dvorak without setting a system-wide default. Having to sudo to do it is fine, but it can't be the default keymap for any console user. Resources like this and this seem to be explaining how to permanently alter the system but I need to change it on the fly temporarily. In BSD this was possible by using wsconsctl.

  Read the article

• Can't install NetBeans

  - by João Vinholi

  I had never had problems with netbeans installation, but now I am. I have downloaded JDK and JRE properly as I always do and I have started the installation using the terminal as well. When the screen for JDK directory selection comes, I select the JDK folder that I have downloaded, but for some reason the following warning is shown: "An error occurred while validating the path." Do you know what could be?

  Read the article

• 12.04 indicates filesystem check on next boot, but never does one

  - by pcm

  Just installed 12.04 32 bit on my machine, with 3 drives. When I open a terminal window or ssh in remotely, I see: Welcome to Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-29-generic-pae i686)  * Documentation:  https://help.ubuntu.com/ *** /dev/sda1 will be checked for errors at next reboot *** *** /dev/sda2 will be checked for errors at next reboot *** *** /dev/sdg1 will be checked for errors at next reboot *** Last login: Fri Aug 31 08:15:41 2012 from .... However, if I reboot, I never see it doing a disk check on boot up, like I used to see with 10.10. Note, after install, I was not seeing the grub menu on boot. I made a ISO disk with BootRepair and now I get the normal grub menu. Any idea as to why the disk check is not happening on boot (I know I can boot a Live CD and then check the disk - I just want the check on boot working)?

  Read the article

• Multitouch screen needs two touch points

  - by BloodPhilia

  So, I got a netbook (Some weird China brand) and it has a multitouch screen. I got to installing Ubuntu Netbook 10.10 and I used the mouse and keyboard for that. When I wanted to try the touchscreen, at first it didn't seem to work, then I tried to multitouch, and this is what happens: I put my finger on point A I put my finger on point B, while still holding point A. The cursor now jumps to the location on the screen where point A is touched. I can now use point A to drag the cursor ONLY when holding point B. I can use point B for clicking by tapping, but ONLY when holding point A at the place I want to click. What is going on?

  Read the article

• How can I properly create /dev/dvd?

  - by chazomaticus

  Certain programs look for /dev/dvd by default to find DVDs. When I first boot my computer without a DVD inserted, /dev/dvd exists and points to the correct place (/dev/sr0). However, when I insert a DVD, /dev/dvd disappears. I'd like it to stick around so I don't have to navigate to /dev/sr0 in programs that are looking for DVDs. How do I ensure that the /dev/dvd symlink exists and points to the right place? It looks like I can add something to /etc/udev/rules.d/70-persistent-cd.rules. This site gives a couple of examples, but the 70-persistent-cd.rules file says "add the ENV{GENERATED}=1 flag to your own rules", which isn't part of the examples. The man 7 udev page is impenetrable to me, and I'm not convinced the linked page gives 100% of the information I need. So, what can I do on a modern, Ubuntu 12.04 (or later) system to make /dev/dvd always exist and point to the right device? EDIT: Is it as simple as adding ENV{GENERATED}=1 to the rules in the linked page, something like this: SUBSYSTEM=="block", KERNEL=="sr0", SYMLINK+="dvd", GROUP="cdrom", ENV{GENERATED}=1 Is that the right information for modern Ubuntu? What is ENV{GENERATED} doing there, when it wasn't generated, but hand-written?

  Read the article

• How to mount a drive for other user than root?

  - by Ondra Žižka

  I've attached a SSD disk though USB. Then: sudo su - mkdir /mnt/hx chown ondra /mnt/hx mount /dev/sdb1 /mnt/hx # It's FAT32 now, but was the same with EXT4 The last command changes dir owner to root. Whenever I create a file in the root dir, I need to be root and root is the owner. Can I set different user as owner of the mounted dir? Or, simply said, ensure that user XY can freely read/write on the drive.

  Read the article

• Adjust brightness and contrast?

  - by Anon58

  I have an acer aspire as5750. With the intel hd 3000 graphics. When i use the adjustment function keys the dial moves but it doesn't translate to the screen diming. Same with the dial in linux settings. Also in colour settings it seems there is no colour file or icc profile available for this laptop. Do you think if i can get a working icc profile then it will fix this or not? I have found something that could work:Argyll but it looks complicated to use, has anyone here used it? Would it allow me to dim? Or is there any other work around? I have searched lots but can't find a solution.

  Read the article

• Massive Xubuntu desktop malfunction

  - by viktiglemma

  I'm using Xubuntu 11.04. Before everything worked fine, but when booting today the following happened: 1) Window focus does not leave the first-opened program. This means that if I keep Firefox open, and open a terminal, window focus will never be transferred to the terminal. (EDIT: if I open a terminal first, and then open Firefox, Firefox steals focus) 2) Window menus have disappeared. The maximize, minimize, etc., buttons and menu are gone. 3) In Xfce Settings Manager, the "Window Manager" settings window is empty. There is just a gray screen there, so I cannot modify any window settings. 4) The keyboard shortcuts I had previously defined using the Settings Manager do no longer work. Further, ALT-TAB no longer works for cycling between windows. 5) The mouse pointer does not show when I first log in. I have to log out and log in again (with an invisible pointer) before the mouse shows itself. EDIT: 6) I cannot resize or move the Thunderbird window, but I can move the Firefox window What can I do to troubleshoot this?

  Read the article

• Connecting / disconnecting DisplayPort causes crash

  - by iGadget

  I wanted to file a bug about this using ubuntu-bug xserver-xorg-video-intel, but the system prompted my to try posting here first. So here goes :-) While the situation in Ubuntu 11.10 was still somewhat workable (see UI freezes when disconnecting DisplayPort), in 12.04 (using Unity 3D) it has gotten worse. The weird part is that during the 12.04 beta's, the situation was actually improving! I was able to successfully connect and disconnect a DisplayPort monitor without the system breaking down on me. But now with 12.04 final (with all updates), it's just plain terrible. When I now connect an external monitor using the DisplayPort connector on my HP ProBook 6550b, it only works sometimes. Most times (but not always!) the screen just goes blank and the system seems to crash (not even CTRL+ALT+F1 works anymore). Only a hard shutdown by keeping the power button pressed for several seconds and then a restart gets me out of this. I suspect the chances of the system crashing become higher as the system's uptime increases, especially when there have been one or more suspend-resume cycles (although I have also experienced this bug once from a cold boot). Disconnecting is roughly the same as with 11.10 (see issue mentioned above), with the difference that if I resume from suspend, I no longer have to do a CTRL+ALT+F1, ALT+F7 cycle to get my screen back. So what more can I try? Or should I just go ahead and file the bug anyway?

  Read the article

• Why can't i ping server? VMware set to 'Bridged' loses IP address on 10.04.

  - by Dave

  I have installed a fresh 10.04 server onto a laptop on a home network as a VMware machine and set network connection to 'Bridged: connect directly to the physical network' from within VMware and rebooted the server. It then loses its IP address. 'dhclient eth0' says "No working leases in persistent database - sleeping" DHCP is working fine on the wi-fi router. The laptop is wired to a wireless router and from there wirelessly to a desktop. Desktop and Laptop can ping each other from Windows. I can ping the VM from Windows on the same laptop, but not from the desktop. Strangely ping has started to resolve hostnames to IPv6 addresses and not IPv4. Don't know whether that's connected? A kick in the right direction would be greatly appreciated. I've been an Ubuntu desktkop user for a few years, but new to ubuntu servers.

  Read the article

• Cannot get temperatures in Dell Studio 1558

  - by Athul Iddya

  I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

  Read the article

• Can I toggle word-wrapping on/off quickly in Gedit?

  - by Ivan

  Depending on nature of the text, some times line wrapping is convenient, some times it is just confusing. And every time I need to switch this (pretty frequently) I have to do to View - Preferences - Enable text wrapping - Close - 4 clicks, not mentioning all the hand, eye and thought motion. Can this be done a quicker way? Most of text editors have this 2 clicks away (in a menu) at maximum, some have it on a toolbar or a hot key, but I couldn;t find any quick way in Gedit :-( Maybe there is a hot key I don't know?

  Read the article

• Clock drift even though NTPD running

  - by droffo

  I'm having a problem with the clock drifting on my PC. I'M running Ubuntu 10.10 on an somewhat crusty IBM e-server (1.5GB RAM, 2.4GHz CPU) ntpd is running (started at run level 2) servers are defined: server 1.us.pool.ntp.org server 2.us.pool.ntp.org server 3.us.pool.ntp.org server time.nrc.ca server ntp1.cmc.ec.gc.ca server ntp2.cmc.ec.gc.ca server wuarchive.wustl.edu server clock.psu.edu Looking at the log file, it would seem that the ntp daemon is running, but the system clock never seems to be set, however. If I manually set the time from a Casio "atomic" watch, the date/time displayed by the Clock applet drifts out of sync over time. Looking at the log file (below) it would seem the ntp daemon started ok and is running. So I am totally flummoxed right now :-( Here's a copy of my ntp.log file.

  Read the article

• Installing 13.04 on an EFI partition - Share with Windows 8?

  - by mengelkoch

  Information I've found here suggests that for my system, I need to install 13.04 into an EFI-type partition, since it needs to boot as UEFI. I also understand it is advisable to have only ONE EFI partition on the disk; I've read here that it is OK for Ubuntu and Windows to share the same partition (please confirm). When I try to install into the existing EFI drive, I get the message "No root file system is defined. Please correct from partitioning menu." Do I change the EFI boot partition to another type? Doesn't that defeat the purpose? If I change it to Ext4 Journaling File System, I am given the opportunity to define the '/' Mount point. I haven't proceeded beyond this point for fear I am going to destroy Windows 8 by altering this partition. BTW, I created three partitions in Windows before installing, per the helpful response to my previous question. But if I try to install into the partition I created for Ubuntu, I get the "No root file system..." error again.

  Read the article

• How do I make Unity quit opening Firefox under the Shiretoko icon?

  - by Azendale

  I'm using Ubuntu 12.04, and whenever I open Firefox, whether it is from searching on the dash or clicking a 'quick-launch' launcher, it always opens yet another icon for the running instance that is a blank page and says Shiretoko. It will pulse the Firefox icon for a while (I'm guessing until a timeout or something). It's as if Unity no longer recognizes the Firefox process as Firefox and misidentifies it as Shiretoko. (I know Shiretoko was a testing version of Firefox a long time ago.) How do I set Unity straight? I imagine that it has something to do with me once using Shiretoko, but I believe that was even on a different installation, just the same home folder. Is there some place Unity caches this information that I can clear (or remove specific parts of)?

  Read the article

• How do I find out which version and derivate of Ubuntu is right for my hardware in terms of minmal system requirements?

  - by con-f-use

  For a given hardware configuration, how do I find out if Ubuntu will run on it? What considerations should I take into account when choosing an Ubuntu version and flavour such as: Xubuntu with a lighter desktop than the usual Gnome and Unity Lubuntu with the even lighter LXDE desktop Obviously Ubuntu does not run on some processor architectures. So how do I go about choosing the right version and derivate. How can I find out the minmal system requirements?

  Read the article

• Do you know some Information about train travel in China?

  - by user79989

  Me and my friend are planning to China travel next year.well train travel in China is an interesting experience, with the world's fastest train (guangzhou to wuhan), the word's highest train (in tibet) and the world's oldest working train (from Tonglio to Baotou in the north of China). Now travelling in China by train is not always easy.You can do a Hong Kong to Beijing Train trip, and buy those tickets online. But to be honest with you, most of that journey is pretty boring. The best part of it is going through northern Guangdong and Southern Hunan provinces.ChinaTour.com is a reliable China Travel Agency based in USA, which has specialized in inbound China travel for decades.

  Read the article

• Can't open Evolution CouchDB address book

  - by Amanda

  Unable to open address book This address book cannot be opened. This either means that an incorrect URI was entered, or the server is unreachable. I tried the solution (and suggestions) in Evolution has no access to couchdb but that isn't working for me. I tried stopping desktopcouch-service and deleting my access keys and now the error I get says Unable to open address book This address book cannot be opened. This either means that an incorrect URI was entered, or the server is unreachable. Detailed error message: Address Book does not exist Do I need to create my addressbook anew?

  Read the article

• Unable to enumerate USB device on port 2 when connecting Android phone

  - by ProfessionalAmateur

  I'm running Ubuntu 11.10 (64-bit) as a VirtualBox guest on a Win7 64-bit host. When I plug in my Android Epic4g (Galaxy S) both the host and guest see the device properly, however lsusb does not. When I run dmesg I get the following: [ 361.664219] usb 1-2: new full speed USB device number 79 using ohci_hcd [ 362.428798] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 363.313782] hub 1-0:1.0: unable to enumerate USB device on port 2 I get the same type of dmesg message with the USB 2.0 (ECHI) Controller enabled and disabled for the guest OS. I'm stuck with this one, can anyone help?

  Read the article

• How do I disable/modify CPU underclocking due to temperature on a laptop with a 2nd generation core cpu?

  - by Tyson Marchuk

  I am running Ubuntu 11.04 on a tablet with a Core i5-2557M processor. When doing processing intensive tasks the CPU is forcibly under-clocked to 800MHz (instead of the normal base of 1.7GHz.) The CPU temperature is around 75 C. I have disabled CPU scaling (set governor to performance) but this seems to have no effect. I would like to either modify the behavior so that the throttling happens at 95 C or I would like to disable it altogether. Changing the min/max frequency as root using cpufreq works until the temperature rises and then it ceases to work, ignoring a minimum frequency above the 800MHz. On Windows 7 there is a 3rd party utility that can do this (ThrottleStop). Thank you.

  Read the article

• Why does Unity not extend to my 2nd monitor, even when it is displaying an X-Screen?

  - by Gridwalker

  I recently added a 2nd video card to my system, but unity refuses to extend my desktop over to the second screen. Although the secondary monitor initialises when I boot and I can move the mouse cursor over to the 2nd screen, the screen is otherwise blank (showing no wallpaper or interface elements) and I am unable to move any windows to this monitor. Moving the mouse cursor over to the 2nd monitor changes it from the default cursor to the old-style X cursor, such as the one that appears when you run X-kill, indicating that this screen is initialised in the X Server but that Unity is not recognising it. Although the Nvidia X Server Settings application can see both monitors, the unity systems settings application does not detect the 2nd adapter. Sometimes the additional drivers application can see both adapters, but it doesn't consistently show options for them both. Xrandr also fails to detect the 2nd monitor, but iNex lists both adapters. I have experimented with several different drivers for each adapter and with setting each of the graphics cards as the primary adapter in the BIOS, but this has made little difference. The two adapters are an onboard Geforce 8200 and a PCIE Geforce 7200 GX. The onboard adapter is currently set as the primary, however this adapter crashes whenever I use the Nouveau driver and I have to switch over to the PCIE as a primary whenever I purge the proprietary drivers (switching back when the 304 driver has been reinstalled). It doesn't matter which adapter I set as my primary, the results are the same : one screen showing the unity interface and one screen showing an X-Screen that only displays the mouse cursor. All I want is to be able to run this system in a dual screen configuration. I am not a gamer, nor do I require 3D rendering capabilities. Anything you can suggest to get the desktop to extend across both screens will be massively appreciated!

  Read the article

• Unable to run curl on on Ubuntu11.10

  - by ryy

  I ran : sudo apt-get install curl libcurl3 libcurl3-dev php5-curl Put: extension=php_curl.so in both /etc/php5/cli/php.ini and /etc/php5/apache2/php.ini But running php from the command line gives me the following error: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/php_curl.so' - /usr/lib/php5/20090626+lfs/php_curl.so: cannot open shared object file: No such file or directory in Unknown on line 0 Running the install commands again tells me that everything is already the newest version. Running: locate php_curl.so Returns nothing.

  Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >