Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 462/1036 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Swap on Ubuntu: No primary partition

    - by 3l4ng
    I am running Ubuntu 13.10 64bit on a system with 4GB RAM, dual booting with Windows Most people say that it is good to have swap on a system, and results in speed, so I used it with my previous Ubuntu installations. In my new HDD, I use 3 primary partitions: 1 for Windows OS, 1 for Ubuntu and 1 for data. The windows system also took up one primary partition for system, and I have only 4 MBR slots. Effectively I have no primary partition for SWAP. I do not know it happened earlier, but back then I had a partition for swap as well My CURRENT disk partitioning looks like this: http://imgur.com/YMTr879 How can I create swap in my current setup?

    Read the article

  • Where do my programs get installed?

    - by Micah
    Coming from windows I'm used to having everything installed in c:\program files\company\product. On Ubuntu I'm totally stumped. It seems like everything I install winds up somewhere different. Somethings are in /bin some in /home/myuser and others in /etc or /usr. I can't seem to figure this out. In particular I'm trying to find where they're located so I can either setup shortcuts on the task bar or associate them with other programs (like my greasemonkey editor) but I'm not having any luck.

    Read the article

  • How do I install Adobe Acrobat Pro From Web Premium CS4,....?

    - by RedBunny
    I am Running the new Ubuntu 12.04 Beta 2, and am looking to install Adobe Acrobat Pro from My CS4 Web Premium CD. Whenever I try and install the setup.exe I get the following error: Internal Error - invalid parameters recieved. in a Wine Program Crash box. I am running wine 1.5 and have tried 1.4 also. I have used winetricks and PlayOnLinux, and cannot get it to install with either program. Any help would be appreciated,.... Also If I cant get it installed does anyone know any programs that can link .PDF files to MySql databases in Linux ,....? I really need this to be able to host some web forms for work. Thanx in Advance,..... ~RedBunny

    Read the article

  • UEC - Unable to SSH into instance, asks for password

    - by nijanthanh
    I am attempting to set up a private cloud using Ubuntu 10.04.4 Server. I am following the tutorial at http://cssoss.wordpress.com/2010/11/26/eucabook-v1-1/ . All steps go on perfectly apart from that I am unable to SSH into the running instances. I have created the instance using a public key and try to SSH into instance using the private key. However it asks for password. I am able to ping the instance though. I have tried using both the pre-built images from the store as well as custom built images. Several people seem to have the same problem but there does not seem to be any working solution. Thanks in advance.

    Read the article

  • not able to boot through pendrive and run set up

    - by Ash
    I have dell inspiron, previously i have install ubuntu 11.10 on my win7 and make it dual boot. but since i want to upgrade my ubuntu version and change the partion spacing, i have delete 11.10 partion directly and extend my hardrive space(windows + ubuntu) at that moment everything is fine. then i have put 12.04 version pendrive in usb boot from usb and install the 12.04 32 bit . it was installed but can't showing dual boot option like 11.10 and my machine directly boot into win7 . so instantly i again delete my 12.04 partion . Now i am able to login into win7 but whenever i put pendrive(12.04) into usb drive i am facing error of "grub rescue" even though i try to put lower version(11.04) it showing another error "Error: No default or UI configuration directive found boot " i have reinstall win7 and reformat all partion still i am facing same error :( i need help badly.

    Read the article

  • Why won't Kubuntu load my CD?

    - by Visualblocks
    I'm running Kubuntu 12.04.1 LTS and Kubuntu hasn't recognised my CD! Here are the results of a sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000c5a81 Device Boot Start End Blocks Id System /dev/sda1 * 2048 964603903 482300928 83 Linux /dev/sda2 964605950 976771071 6082561 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 964605952 976771071 6082560 82 Linux swap / Solaris How am I meant to view it in say, Dolphin?

    Read the article

  • How to change the IP address on my Ubuntu virtual NIC

    - by DextrousDave
    I have a physical windows system, on which I run Vmware Workstation. Now on VMware I run Ubuntu 12.10. I am running a webserver on Ubuntu via LAMP, inside VMware. Problem: Now my local IP address for my virtual NIC (the one Ubuntu is using) has an address of 192.168.159.7, and my home router only issues IP addresses of the range 10.0.0.x. So if I want to port forward to the virtual NIC, which has a 192.168 address, I cannot, so my LAMP webserver cannot be accessed externally since the router does not know to send the packets on port 80 to the virtual NIC... How do I fix that? The only way I guess is to assign a 10.0.0.x ip address to the virtual NIC?? But how do I do that? I tried to do it on the host Windows machine with 'Get my IP address automatically' but it issues a 192.168 address every time... Thank you

    Read the article

  • Ghosting Program for Ubuntu 12.10

    - by Sean Webber
    I am looking to figure out how to set up a mass backup system for a computer network (of about 25) and am looking for a ghosting program that makes an image of the entire system for backup/recovery purposes. While clonezilla would work.. you have to manually boot us the CD for it. I am looking for a program that runs INSIDE Ubuntu that sends a system image backup off to the network server at set times, then when needed could also be used to burn the clone back to the machine. Another words- automatically and the only time I have to do anything to it is when I need to burn a backup BACK to a 'crapped' machine. Any ideas?

    Read the article

  • certain files not syncing

    - by Josh
    I have UbuntuOne set up to sync a one folder with a number of subfolders. For some reason some of the subfolders have stopped syncing. Within one subfolder with 6 subfolders in it, some are showing up empty (they shouldn't be) and some are showing up with only some of the files they should contain. I have synced recently, and newer files are showing up in other subfolders. There's just some problem with these particular folders. They are not especially big nor do they have especially big files in them. Thoughts?

    Read the article

  • OUCH! Laptop running SUPER HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu editions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! (left side of terminal) (right side of terminal) This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

  • Laptop runs HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

  • Manually activate Network Manager Applet

    - by diosney
    The issue I've is that when I connect via modem through gnome-ppp the Network Manager Applet don't detect a connection and don't let me use the configured VPNs via its interface. How Can I manually activate the Network Manager Applet? What I need is to enable the Network Manager apple in order to use the "VPN Connection" section of the GUI. When I don't have an ethernet cable connected and I connect through a modem the Network Manager applet doesn't enables itself, it is like if don't recognizes the ppp0 interface. My question is: there is a way to force the Network Manager GUI indicator to make it "alive"/"up"/"enabled" in order to use the "VPN Connections"section? Thanks in advance.

    Read the article

  • Why don't popular software programs like photoshop or world of warcraft support ubuntu?

    - by user784637
    The only thing stopping me from making ubuntu 12.04 my main os is that a lot of programs I use on windows 7 and mac aren't available for download on ubuntu. Why don't popular software programs like photoshop or world of warcraft support linux? Also - Would a company have to create the program (ex photoshop) for every possible distro(gentoo, arch linux, ubuntu, etc...), or would they just have to make one binary and it would work across all distros?

    Read the article

  • My msi gtx460 video card and nvidia problems

    - by Rik
    I am trying to convert to ubuntu completely but my problems lies here, I install the os and the main monitor works fine, but the secondary monitor? blank.. is there any help with this? I know the os has problems with Nvidia stuff but if i can get the dual screens working, that is one thing out of the way. I have read and tried post "Ubuntu 12.04 Nvidia GTX 460 video card installation" and failed so hard i have to format and start over. Thanks!

    Read the article

  • Dual monitors with one above the other?

    - by Felix
    I'm using Gnome 3 and proprietary Nvidia drivers. I have tried to set in nvidia-settings my external monitor to be "above" my main one (it's a laptop). However, when I try to drag a window up from the main display to the external one, it gets stuck and can't move past a certain point. Trying to maximize it changes its decoration so it looks maximized (i.e. no borders, etc), but its size or position doesn't change. Now, if I set my external monitor to be "to the left" of the main one, it works, which is why I'm suspecting this is a Gnome issue, not an Nvidia one. Anyone know how to fix this? Update: some versions: Gnome: 3.2.2.1 Nvidia: 280.13 Update 2: I can see that Gnome 3.4 is out, and among the release notes is better external monitor support. However, they only mention a small fix that is unrelated to my problem. Can anyone with Gnome 3.4 and access to an external monitor please test this out and tell me if it works? I don't want to go through the hassle of upgrading my Ubuntu installation unless I know for certain it's going to fix the problem.

    Read the article

  • Unity on Ubuntu 11.10 - The Dash Home button brings up the panel, but is empty

    - by David M. Coe
    The dash home button brings up a panel that is greyed out, but it is totally empty. It seems to be the very same issue as this: Dash home button brings up blank window which is unanswered. /usr/lib/nux/unity_support_test -p returns OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RV370 OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes I've tried a unity --reset but that doesn't seem to work. Unity seems to reset, but I get the following warning over and over: cs space validation failed unity What should I do next to try and fix this? Edit: Attempted fixes: I've refomatted, did not work. I've done apt-get remove unity then apt-get update then apt-get install unity, did not work. I've switched to Unity 2d and this seems to work. How can I get regualar Unity working or atleast find the error?

    Read the article

  • Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

    - by andybjackson
    Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

    Read the article

  • Ubuntu 12.04 nVidia TwinView tearing

    - by Andy Turfer
    I'm running Ubuntu 12.04. Today I just purchased a second monitor (I have a Dell U2711 and a 42-inch Sony TV). I'm running the 295.49 proprietary nVidia graphics driver, my graphics card is a GeForce GTX 460. I am not able to activate "xinerama" with "separate X screens", not sure why. I am able to use TwinView. This works, although it results in severe tearing on the Sony TV. It's as though "sync to vblank" isn't working (I have this set in Compiz and in the nVidia settings). If I disable the Dell U2711 and only use the Sony, everything works fine, zero tearing. Is it the case that "sync to vblank" can only work on a single monitor in Ubuntu 12.04? Is there any way to get rid of the tearing on the second monitor in TwinView mode?

    Read the article

  • No Option To Duel Boot Ubuntu 12.04 USB

    - by Jordan
    I have used universal usb installer on my HP probook 2000 on my Kingston data traveler (8GB). When I boot I select to boot from USB and then click on Install Ubuntu 12.04 LTS, I get to the partition part, but there is no option to keep existing Windows and dual boot. I only have Erase entire disk and something else. How can I get this dual boot to come up? Screen Shot Here I also cannot use a CD/DVD

    Read the article

  • Install vim offline

    - by rosemary
    I have Ubuntu 12.04.02 desktop in my college Lab of around 15 pcs with no internet connection. I used to install packages : sudo apt-get install vim It was just fine. But, now I want to install vim locally(i.e.,using a pendrive or CD drive). Where and how can I accomplish this,as I am new to it. Through googling, I could get some sites offering packages, but I have merely any idea on how to carry on: https://launchpad.net/ubuntu/precise/+source/vim http://www.ubuntuupdates.org/package/core/precise/main/base/vim http://pkgs.org/ubuntu-12.04/ubuntu-main-i386/vim-gnome_7.3.429-2ubuntu2_i386.deb.html What should I exactly download and where to store it in my ubuntu machine and run commands to properly install vim offline? Any word of advice is appreciated!

    Read the article

  • How do I rip a dvd including menus and extras to a menu driven divx file (or any lossy format that supports menus)?

    - by John Baber
    I am asking exactly this question for the same reason, but would like to archive dvds as small, low quality video, while preserving the menu choosing experience. I would like to rip my dvds to something that has the same menus but whose video is in a much more compressed format. I do not want to copy a dvd to an .iso image. How can this be done in the most automatic (hopefully CLI) way possible? Any format is fine so long as playback on linux is possible.

    Read the article

  • Creating an install drive - can not open output file autorun.inf

    - by user226881
    I am trying to make an install/boot drive for a computer that has no operating system and no optical drive. I used the ISO from Ubuntu.com and the burner from pendrivelinux.com. When the program starts writing to the flash drive, there is an error displayed that says : "0 can not open output file E:\autorun.inf" But continues to write data. After it has finished, I remove the drive and insert to the other computer and turn it on, but it never finds a drive to boot from. What is causing this problem and how can I fix it ?

    Read the article

  • Ubuntu 13.04 ERROR: /etc/apt/sources.list not found

    - by Richard Riley
    So, I tried uninstalling the LAMP stack I had following the Ubuntu documentation for it. I also manually removed dbconfig-common. Now, I'm unable to run apt-get update. When I do, I get the error message: E: The method driver /usr/lib/apt/methods/htp could not be found. After some digging, I've discovered that I no longer even have an /etc/apt/sources.list file. Also, I've received an error, when trying to run: sudo tasksel install lamp-server That aptitude can not be found. Does anyone have an idea of what I can do? I'm not able to find any documentation online that works - all the documentation out there is dated and no longer (or will not) work with 13.04. I followed this link previously prior to posting my question and it did not work for me: How do I fix a "E: The method driver /usr/lib/apt/methods/http could not be found." error?

    Read the article

  • How can I install ATI Catalyst Video driver of Ubuntu 12.04.3?

    - by Eastsun
    EDIT My computer is Thinkpad E420 with Intel HD3000 and ATI 6630m. I have reinstalled my Ubuntu12.04.3 yesterday. I had successfully installed Ubuntu and ATI Catalyst Video driver many times about half year ago following these links: How do I get AMD/Intel Hybrid Graphics drivers to work? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? However, this time I have no luck with installing ATI Catalyst Video driver. I have tried version 13.4, 13.1, 12.8 of ATI Catalyst Video driver. It seemed that 13.4 doesn't support 12.04 any more, following this link , the lowest Ubuntu version supported by ATI 13.4 is 12.10 and for the reset of the ATI drivers, the kernel version and xorg version of Ubuntu 12.04.3 is too high to be supported. So, should I stay on ubuntu 12.04.1 with ATI 12.8, or there is any way to install ATI driver on Ubuntu 12.04.3?

    Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >