Search Results

Search found 15704 results on 629 pages for 'block world'.

Page 467/629 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

• KVM recommendations

  - by alex

  I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

  Read the article

• Apache ProxyPass with SSL

  - by BBonifield

  I have a QA setup that consists of multiple internal development servers and one world-accessible provisioning machine that is setup to proxy pass the web traffic. Everything works fine for non-SSL requests, but I'm having a hard time getting the SSL logic working as well. Here's a few example vhost blocks. <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev2.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev2.site.com </VirtualHost> I end up seeing the following error in the provisioner's error log. [Fri Jan 28 12:50:59 2011] [warn] [client 1.2.3.4] proxy: no HTTP 0.9 request (with no host line) on incoming request and preserve host set forcing hostname to be dev1.site.com for uri / As well as the following entry in the destination QA machine's access log. 192.168.168.101 - - [22/Feb/2011:08:34:56 -0600] "\x16\x03\x01 / HTTP/1.1" 301 326 "-" "-"

  Read the article

• Why are UDP messages from outside the network received but not delivered?

  - by Warren Pena

  I have an Ubuntu Server 10.04 application I've developed that receives messages over a UDP port. The ultimate purpose of this application is to receive messages sent from workers' 3G modems out in the field. If use netcat on either another ubuntu Server or my Vista laptop (both on the same LAN as my test machine) to send a message, the message arrives correctly and appears in my application. However, if I go out to my car and use its 3G modem to send a message from the same Vista laptop, it doesn't work. If I run tcpdump -A, I see the message arrive correctly, but it's never delivered to my application. Clearly, the OS is the one making the choice not to deliver the messages (else they wouldn't appear in tcpdump nor would my app receive them when coming from local machines). I have not installed any firewall software on this machine, nor am I aware of anything installed by default that would block the traffic. sudo iptables --list returns Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I'm not too familiar with iptables, but it looks to me like that's telling it to not do anything. What could be going on that's preventing my messages from being delivered?

  Read the article

• Sending USR2 to mongrel_rails sometimes results in an “Address already in use” on the restart

  - by Ben

  We have a rolling-restart mode for our mongrel cluster that sends a USR2 signal to each running process. This works great, most of the time. But very occasionally the mongrel process will shutdown, and then fail to restart, with the following error: /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/tcphack.rb:12:in `initialize_without_backlog': Address already in use - bind(2) (Errno::EADDRINUSE) from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/tcphack.rb:12:in `initialize' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:93:in `new' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:93:in `initialize' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:139:in `new' from /usr/local/lib/ruby/gems/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:139:in `listener' Looking though the mongrel source, the USR2 handler calls a synchronous stop on the running server, so it ought to block until the socket has been released. Has anyone seen this error? Does anyone have any ideas what might cause it? (I asked this question over on StackOverflow initially, but thought it might be more appropriate here)

  Read the article

• How do Opera's keyboard shortcut settings work?

  - by zem

  Firefox 4 beta is starting to freeze up the way Firefox 3 used to on my machine, and I want a browser that'll play gifs at full speed, so on a Mac my only other choice seems to be Opera. There are just two issues I have with it right now: one, the scrolling is weird compared to every other Mac application, but I can get used to that if there's no way to fix it. Two, cmd-1 through cmd-9 activate the "speed dial" bookmarks instead of selecting tabs 1-9, like in Firefox and Chrome. I can disable those shortcuts easily enough, so I don't keep accidentally loading a different page when I instinctively try to do that, but in an ideal world I could remap those commands to do what I want. The keyboard shortcut editor is weird: There seems to be a scrappy little language for associating actions with commands. It has some limited autocompletion when you type stuff in, and I couldn't find a "select specific tab" action, but some of the existing commands are complicated enough that I'd be surprised if there's not a way to do it. Is there documentation for this language anywhere? Clicking "help" just brings me to this page, which is not very helpful.

  Read the article

• "Windows detected a hard drive" issue in Windows 7 x64

  - by Jasiu

  I upgraded to the OCZ-Agility3 120GB from a 60 OCZ Vertex2 SSD. I cloned the drive from the Vertex to the new Agility. Everything seemed to have gone well and have not had any problems. Recently in the passed month I have gotten this error: I downloaded teh OCZToolboxMP and ran the SMART utility and don't see anything wrong: SMART READ DATA ModelNumber : OCZ-AGILITY3 Serial Number : OCZ-Y1945X77438P4NU6 WWN : 5-e8-3a-97 ebea5ba76 Revision: 10 Attributes List 1: SSD Raw Read Error Rate Normalized Rate: 70 total ECC and RAISE errors 5: SSD Retired Block Count Reserve blocks remaining: 100% 9: SSD Power-On Hours Total hours power on: 968 12: SSD Power Cycle Count Count of power on/off cycles: 28 171: SSD Program Fail Count Total number of Flash program operation failures: 0 172: SSD Erase Fail Count Total number of Flash erase operation failures: 0 174: SSD Unexpected power loss count Total number of unexpected power loss: 11 177: SSD Wear Range Delta Delta between most-worn and least-worn Flash blocks: 0 181: SSD Program Fail Count Total number of Flash program operation failures: 0 182: SSD Erase Fail Count Total number of Flash erase operation failures: 0 187: SSD Reported Uncorrectable Errors Uncorrectable RAISE errors reported to the host for all data access: 4145 194: SSD Temperature Monitoring Current: 30 High: 30 Low: 30 195: SSD ECC On-the-fly Count Normalized Rate: 120 196: SSD Reallocation Event Count Total number of reallocated Flash blocks: 100 201: SSD Uncorrectable Soft Read Error Rate Normalized Rate: 120 204: SSD Soft ECC Correction Rate (RAISE) Normalized Rate: 120 230: SSD Life Curve Status Current state of drive operation based upon the Life Curve: 100 231: SSD Life Left Approximate SDD life Remaining: 100% 241: SSD Lifetime writes from host lifetime writes 893 GB 242: SSD Lifetime reads from host lifetime reads 968 GB Does anyone have any ideas of what might be wrong and or how I can go about fixing this? Please let me know if there is other information I can provide. Thanks for your help Windows 7 x64 SP1 AMD Phenom II X4 940 8GB RAM

  Read the article

• How to know if your computer is hit by a dnschanger virus?

  - by kira

  The Federal Bureau of Investigation (FBI) is on the final stage of its Operation Ghost Click, which strikes against the menace of the DNSChanger virus and trojan. Infected PCs running the DNSChanger malware at unawares are in the danger of going offline on this coming Monday (July 9) when the FBI plans to pull down the online servers that communicate with the virus on host computers. After gaining access to a host PC, the DNSChanger virus tries to modify the DNS (Domain Name Server) settings, which are essential for Internet access, to send traffic to malicious servers. These poisoned web addresses in turn point traffic generated through infected PCs to fake or unsafe websites, most of them running online scams. There are also reports that the DNSChanger virus also acts as a trojan, allowing perpetrators of the hack attack to gain access to infected PCs. Google issued a general advisory for netizens in May earlier this year to detect and remove DNSChanger from infected PCs. According to our report, some 5 lakh PCs were still infected by the DNSChanger virus in May 2012. The first report of the DNSChanger virus and its affiliation with an international group of hackers first came to light towards the end of last year, and the FBI has been chasing them down ever since. The group behind the DNSChanger virus is estimated to have infected close to 4 million PCs around the world in 2011, until the FBI shut them down in November. In the last stage of Operation Ghost Click, the FBI plans to pull the plug and bring down the temporary rogue DNS servers on Monday, July 9, according to an official announcement. As a result, PCs still infected by the DNSChanger virus will be unable to access the Internet. How do you know if your PC has the DNSChanger virus? Don’t worry. Google has explained the hack attack and tools to remove the malware on its official blog. Trend Micro also has extensive step-by-step instructions to check if your Windows PC or Mac is infected by the virus. The article is found at http://www.thinkdigit.com/Internet/Google-warns-users-about-DNSChanger-malware_9665.html How to check if my computer is one of those affected?

  Read the article

• SAN with iSCSI-Target Performance Horrendous

  - by Justin

  We have a poor man's SAN setup in a 1U Ubuntu server running iSCSI-Target with two 300GB drives in RAID-0. We then are using it for block level storage for virtual machines. The hypervisor is connected to the SAN via gigabit on a dedicated VLAN and interfaces. We only have a single virtual machine setup and doing some benchmarks. If we run hdparm -t /dev/sda1 from the virtual machine, we get 'ok' performance of 75MB/s from the virtual machine to the SAN. Then we basically compile a package with ./configure and make. Things start ok, but then all the sudden the load average on the SAN grows to 7+ and things slow down to a crawl. When we SSH into the SAN and run top, sure the load is 7+, but the CPU usage is basically nothing, also the server has 1.5GB of memory available. When we kill the compile on the virtual machine, slowly the LOAD on the SAN goes back to sub 1 figures. What in the world is causing this? How can we diagnosis this further? Here are two screenshot from the SAN during high load. 1> Output of iotop on the SAN: 2> Output of top on the SAN:

  Read the article

• "Steam needs to be online to update" - 404 fetching *_osx.zip.*

  - by Chris Boyle

  Since yesterday evening, when I launch Steam on OSX, a self-update progress bar appears instead (at 0 of 30MB or so). This bar does not advance, an error dialog appears: Steam needs to be online to update Please confirm your network connection and try again. The app then exits. This happens whether wifi or ethernet or both are connected, and pings to the outside world succeed throughout. If I look at the logs in Console, they are very similar to this example (though that's not mine). Specifically: Success! http://store.steampowered.com/public/client/steam_client_osx?date=718277 [...] Failed! http://cdn.store.steampowered.com/public/client/breakpad_osx.zip.27f59114a86fcd50533e1d7b128f9300947f9969 Failed! http://cdn.store.steampowered.com/public/client/steam_osx.zip.11a99384214805f2dd3be5084ba6be61d662f8ac Failed! http://cdn.store.steampowered.com/public/client/miles_osx.zip.d9fb546541f59c1fdd03962a605236b1021abab8 Requesting the first URL successfully returns some data including the filenames of the latter three, and requesting any of those gives me a 404 (I've tried multiple clients on multiple continents). Searches on Google and Twitter show about 10-20 others having this problem in the past 24 hours, but hardly the angry mob I'd expect if the problem affected all Steam OSX users. Things that have already been tried with no effect: Switching between wifi and ethernet. Killing all Steam processes including ipcserver. Moving the ~/Library/Application Support/Steam/registry.vdf file away. Requesting those URLs with other clients and from other locations. Interesting: that first URL with the date parameter returns the same content even without that parameter (thus would lead to the same 404s) suggesting that the problem is not necessarily specific to coming from a particular currently-installed version of Steam.

  Read the article

• What is Apache Synapse?

  - by Aren B

  My website keeps getting hit by odd requests with the following user-agent string: Mozilla/4.0 (compatible; Synapse) Using our friendly tool Google I was able to determine this is the hallmark calling-card of our friendly neighborhood Apache Synapse. A 'Lightweight ESB (Enterprise Service Bus)'. Now, based on this information I was able to gather, I still have no clue what this tool is used for. All I can tell is that is has something to do with Web-Services, and supports a variety of protocols. The Info page only leads me to conclude it has something to do with proxies, and web-services. The problem I've run into is that while normally I wouldn't care, we're getting hit quite a bit by Russian IPs (not that russian's are bad, but our site is pretty regionally specific), and when they do they're shoving wierd (not xss/malicious at least not yet) values into our query string parameters. Things like &PageNum=-1 or &Brand=25/5/2010 9:04:52 PM. Before I go ahead and block these ips/useragent from our site, I'd like some help understanding just what is going on. Any help would be greatly appreciated :)

  Read the article

• Slow VM on esxi 4.1

  - by user57432

  We have a FreeBSD 64bit running on a esxi 4.1, the hardware platform is a DELL R710 with 2 x 56xx (intel 6core cpu) and 48 GB ram. The FreeBSD vm is very slow, when we compiles/builds something on it, it takes 5 minuts and it says "build time 18 seconds.". There's no vmtools installed on the vm. The same vm is installaed on another R710 running esxi 4.0 for dell and there's no problems with that one. Does anyone have any idea about what to look for? the VMs on the second server (ESXi 4.1) is a clone of the VMs running on the first VMserver (ESXi 4.0 Dell edition). It's not possible for me to move the VM back to the first server since the file contaning the vm is too big. We installed the new esxi with a datasore with 8mb blocks because 1mb blocks dident allow for the file size we needed. It looks like the www server on the new ESXi 4.1 works fine, but I havent really tested it. There's not installed vmtools on any of the VMs (FreeBSD). The block size on the second VM (ESXi 4.1) datastorage is 8mb and 1mb on the first (ESXi 4.0)

  Read the article

• CoreStore Encryption Error on Mac Lion

  - by Michael

  I am trying to encrypt an external drive using diskutil CoreStorage on Mac Lion 10.7.4. I thought the only requirements were that the drive have GUID partition scheme and Journaled HFS+ file system. I think my drive is configured accordingly but when I type the following command I get an error message back: Michaels-MacBook-Pro:~ Michael$ diskutil cs convert disk2 -passphrase TestPassword Error converting disk to CoreStorage: The given file system is not supported on Core Storage (-69756) Here are the details reported for the drive in question: Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil info disk2s2 Device Identifier: disk2s2 Device Node: /dev/disk2s2 Part of Whole: disk2 Device / Media Name: Test1 Volume Name: Test1 Escaped with Unicode: Test1 Mounted: Yes Mount Point: /Volumes/Test1 Escaped with Unicode: /Volumes/Test1 File System Personality: Journaled HFS+ Type (Bundle): hfs Name (User Visible): Mac OS Extended (Journaled) Journal: Journal size 40960 KB at offset 0xe8e000 Owners: Disabled Partition Type: Apple_HFS OS Can Be Installed: Yes Media Type: Generic Protocol: FireWire SMART Status: Not Supported Volume UUID: 1024D0B8-1C45-3057-B040-AE5C3841DABF Total Size: 499.8 GB (499763888128 Bytes) (exactly 976101344 512-Byte-Blocks) Volume Free Space: 499.3 GB (499315826688 Bytes) (exactly 975226224 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: No Ejectable: Yes Whole: No Internal: No I'm a little concerned that the "Partition Type: Apple_HFS" entry is causing the problem, but I don't know how to change that. I only seem to be able to control the "File System Personality: Journaled HFS+" in Disk Utility. Can anyone shed some light on this for me?

  Read the article

• Finding all IP ranges blelonging to a specific ISP

  - by Jim Jim

  I'm having an issue with a certain individual who keeps scraping my site in an aggressive manner; wasting bandwidth and CPU resources. I've already implemented a system which tails my web server access logs, adds each new IP to a database, keeps track of the number of requests made from that IP, and then, if the same IP goes over a certain threshold of requests within a certain time period, it's blocked via iptables. It may sound elaborate, but as far as I know, there exists no pre-made solution designed to limit a certain IP to a certain amount of bandwidth/requests. This works fine for most crawlers, but an extremely persistent individual is getting a new IP from his/her ISP pool each time they're blocked. I would like to block the ISP entirely, but don't know how to go about it. Doing a whois on a few sample IPs, I can see that they all share the same "netname", "mnt-by", and "origin/AS". Is there a way I can query the ARIN/RIPE database for all subnets using the same mnt-by/AS/netname? If not, how else could I go about getting every IP belonging to this ISP? Thanks.

  Read the article

• Sticky connection and HTTPS support for HAProxy

  - by Saif

  We have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 apache nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file. global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend main *:5000 acl url_static path_beg -i /static /images /javascript /stylesheets acl url_static path_end -i .jpg .gif .png .css .js use_backend static if url_static default_backend app #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- backend static balance roundrobin server static 127.0.0.1:4331 check #--------------------------------------------------------------------- # round robin balancing between the various backends #--------------------------------------------------------------------- backend app listen ha-http 10.190.1.28:80 mode http stats enable stats auth admin:xxxxxx balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /haproxy.txt HTTP/1.0 server apache1 portal-04:80 cookie A check server apache2 im-01:80 cookie B check server apache3 im-02:80 cookie B check server apache4 im-03:80 cookie B check Please advice. Thanks for your help in advance.

  Read the article

• SAN performance issues storing SQL Server tempdb on a SAN that's being backed up

  - by user42724

  I'm afraid I don't know much about SAN's so please forgive my lack of detail or technical terms. As a developer I've just completed and put on an existing production system a new application but it would appear to have tipped the scales regarding the performance of the backups being taken from the SAN. As I understand it there's a mirror of the SAN being taken usually constantly at the block-level. However, there seem to be so many new writes to the disk that the SAN mirroring/backup process can no longer keep up. I believe I've narrowed this down to SQL Servers tempdb which exists on a drive that contributes the largest portion of the problem! In fact I think tempdb has be contributing the largest portion of the issues all along regardless of my application! My question therefore is whether the tempdb should ever be mirrored or backed on the SAN and whether anyone else has gone through this sort of pain already? I'm wondering whether it's a best practise to make sure that tempdb is never mirrored on a SAN simply because any writes to it don't need to be saved. This also raises a slightly connected question - is it better to rely on SQL Servers built-in database backups tools (DB in full-recovery mode with full/differential and transaction log backups) or, as is the case with our application, SQL server is in simple recovery mode and never backed up since the SAN is mirrored and backed up? Many thanks

  Read the article

• I get a 502 bad gateway ONLY with a specific combination of domain/root folders - NGINX

  - by Patrick De Amorim

  I have a VPS running NGINX and virtual hosts, with a configuration such as this: Domains directing to it: lolpics.no smscloud.no idmag.no Root folders: /home/vds/www/lolpics /home/vds/www/smscloud /home/vds/www/idmag SMSCloud.no is the site that keeps getting 502 errors, but if I make the domain direct to any of the other folders, the site works, or if I make any other domain name direct to the /home/vds/www/smscloud folder, it works. Only smscloud.no with /home/vds/www/smscloud breaks I tried putting this between the http{} in my nginx.conf and no help: proxy_buffer_size 128k; proxy_buffers 4 256k; proxy_busy_buffers_size 256k; EDIT: Well, that was slightly silly, if anyone from Google stumbles on this, here's how I fixed it, I just added this to the http{}: fastcgi_buffer_size 16k; fastcgi_buffers 16 16k; So that the start of my http block is: http { include /etc/nginx/mime.types; proxy_buffer_size 128k; proxy_buffers 4 256k; proxy_busy_buffers_size 256k; fastcgi_buffer_size 16k; fastcgi_buffers 16 16k;

  Read the article

• SAN Replication for Fault tolerance using EVA4400

  - by Sergei

  Hi Everyone, I hope that someone would point me in the correct direction - it looks like I have no enough konwledge in the subject and timeframes are too tight for me to explore different scenarios in depth.. We have two datacenters few miles away from each other connected by 100 Mbps link.Each datacenter will have 5 BL490 blades with ESX Standard hosting about 50 VMs. Eac hsite has HP eva4400 SAN with SAN replication set up.VC is going to be in the first datacenter and both datacenter are networked. SAN Replication is block level so it seems like I cannot just replicate changes but all writes would have to be replicated.This should not be a problem as link can sustain about 1.8 TB a dayand data can be buffered. I am having trouble however visioning how recovery would work in this case.We don't need instant recovery , I would say 4 hours recovery time is accepted so fancy automatic SRM like DR scenario would not be easily accepted due to the financial reasons, however any comments are welcomed. Current idea is following: replicate LUNs from primary site to the secondary.When disaster strikes, IT personnel switches on ESX hosts on the remote side and connects replicated LUNS to them, then registers VMs and changes IP address. I understand that this seems like horribly manual process and I almost sure I have missed some obvious pitfalls here. Could someone let me know what direction should I go?An articles regarding the subject? This is a brand new setup and we would rather build up basic recovery process and scale it later.I just need to have a right direction to allow for such scalability. Thank you very much in advance!

  Read the article

• Is there a simple LDAP-to-HTTP gateway out there?

  - by larsks

  We have a local LDAP directory that provides basic contact information about our user community. We would like to integrate this into some third-party hosted services that allow us to implement widgets that run arbitrary Javascript. In order to connect Javascript to our LDAP directory, I would like to set up a simple LDAP-to-HTTP proxy that would accept HTTP GET requests, translate them into an appropriate LDAP query, and respond with directory information as JSON-encoded data. In an ideal world, something like this: GET /[email protected] Would get me something like this: { "cn": "Bob Person", "title": "System Administrator", "sn": "Person", "mail": "[email protected]", "telepehoneNumber": "617-555-1212", "givenName": "Bob" } (And this obviously assumes that the web application has locally configured information about what base DN to use, how to authenticate, etc). I guess I could write one...but surely something like this already exists? UPDATE The consensus seems to be that there isn't a pre-existing solution out there and that I should just get off my lazy derriere and write one. So I did, and it's here. It's not especially pretty, but it works for my prototyping and I figure maybe someone else will find it useful someday.

  Read the article

• Solaris 10 invalid ARP requests from 0.0.0.0?

  - by JWD

  The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). xxxx:xxxx:xxxx/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else?

  Read the article

• How to diagnose frequent segfaults

  - by Andreas Gohr

  My server is logging frequent segmentation faults to /var/log/kern.log in different tools. So far I've seen them in Perl, PHP and rsync. All installed software is up-to-date Debian packages. Here's an exerpt from the log file: Mar 2 01:07:54 gaz kernel: [ 5316.246303] imapsync[4533]: segfault at 8b ip 00007fb448c98fe6 sp 00007ffff571dd68 error 4 in libperl.so.5.10.1[7fb448bd7000+164000] Mar 2 01:17:42 gaz kernel: [ 5904.354307] php5-cgi[4441]: segfault at 2bb3dc8 ip 0000000002bb3dc8 sp 00007fffbeeaae48 error 15 Mar 2 02:54:05 gaz kernel: [11687.922316] php5-cgi[4495]: segfault at 2d7acf9 ip 0000000002d7acf9 sp 00007fff60c6eb18 error 15 Mar 2 10:50:08 gaz kernel: [40250.390322] BUG: unable to handle kernel paging request at 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.390341] IP: [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390353] PGD 208c71067 PUD 21c811067 PMD 209329067 PTE 8000000211c88067 Mar 2 10:50:08 gaz kernel: [40250.390365] Oops: 0011 [#1] SMP Mar 2 10:50:08 gaz kernel: [40250.390373] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 2 10:50:08 gaz kernel: [40250.390386] CPU 1 Mar 2 10:50:08 gaz kernel: [40250.390392] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd _hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_m ce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 2 10:50:08 gaz kernel: [40250.390566] Pid: 11482, comm: munin-limits Not tainted 2.6.32-5-amd64 #1 MS-7368 Mar 2 10:50:08 gaz kernel: [40250.390576] RIP: 0010:[<00000000024b03f0>] [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390586] RSP: 0018:ffff88021cc8dec0 EFLAGS: 00010286 Mar 2 10:50:08 gaz kernel: [40250.390593] RAX: 000000001ddc1000 RBX: 0000000000000010 RCX: ffffffff810f9904 Mar 2 10:50:08 gaz kernel: [40250.390600] RDX: 0000000000000000 RSI: ffffea0007688200 RDI: 0000000000000286 Mar 2 10:50:08 gaz kernel: [40250.390608] RBP: 00000000ffffffea R08: 0000000000000025 R09: 7865542f30312e35 Mar 2 10:50:08 gaz kernel: [40250.390615] R10: 000000d01cc8ddf8 R11: 0000000000000246 R12: ffff88021cc8def8 Mar 2 10:50:08 gaz kernel: [40250.390622] R13: 0000000002295010 R14: 00000000022c9db0 R15: 0000000002488d78 Mar 2 10:50:08 gaz kernel: [40250.390630] FS: 00007f3b3c8b2700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390641] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 2 10:50:08 gaz kernel: [40250.390648] CR2: 00000000024b03f0 CR3: 000000021c5d1000 CR4: 00000000000006e0 Mar 2 10:50:08 gaz kernel: [40250.390656] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390663] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 2 10:50:08 gaz kernel: [40250.390671] Process munin-limits (pid: 11482, threadinfo ffff88021cc8c000, task ffff88021bf59530) Mar 2 10:50:08 gaz kernel: [40250.390681] Stack: Mar 2 10:50:08 gaz kernel: [40250.390687] ffffffff810f1d4a ffff880208c63228 0000000000000000 00007fffc2dcecc0 Mar 2 10:50:08 gaz kernel: [40250.390697] <0> 00000000024ba2b0 0000000002295010 ffffffff810f1e3d 0000000000000004 Mar 2 10:50:08 gaz kernel: [40250.390712] <0> ffff88021bf59530 ffff88021c4edc00 ffffffff812fe0b6 ffff88021c4edc60 Mar 2 10:50:08 gaz kernel: [40250.390732] Call Trace: Mar 2 10:50:08 gaz kernel: [40250.390742] [<ffffffff810f1d4a>] ? vfs_fstatat+0x2c/0x57 Mar 2 10:50:08 gaz kernel: [40250.390750] [<ffffffff810f1e3d>] ? sys_newstat+0x11/0x30 Mar 2 10:50:08 gaz kernel: [40250.390760] [<ffffffff812fe0b6>] ? do_page_fault+0x2e0/0x2fc Mar 2 10:50:08 gaz kernel: [40250.390768] [<ffffffff812fbf55>] ? page_fault+0x25/0x30 Mar 2 10:50:08 gaz kernel: [40250.390777] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 2 10:50:08 gaz kernel: [40250.390783] Code: Bad RIP value. Mar 2 10:50:08 gaz kernel: [40250.390791] RIP [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390799] RSP <ffff88021cc8dec0> Mar 2 10:50:08 gaz kernel: [40250.390805] CR2: 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.391051] ---[ end trace 1cc1473b539c7f6e ]--- Mar 2 11:42:20 gaz kernel: [43382.242301] php5-cgi[10963]: segfault at d81160 ip 0000000000d81160 sp 00007fff3adcb058 error 15 Mar 2 21:51:14 gaz kernel: [79916.418302] php5-cgi[20089]: segfault at 1c59dc8 ip 0000000001c59dc8 sp 00007fff9b877fb8 error 15 Mar 3 03:45:01 gaz kernel: [101143.334305] munin-update[22519] general protection ip:7f516dce204c sp:7fff6049a978 error:0 in libperl.so.5.10.1[7f516dc7d000+164000] Mar 3 11:22:37 gaz kernel: [128599.570307] php5-cgi[22888]: segfault at 36485a8 ip 00000000036485a8 sp 00007fff2d56e1c8 error 15 Mar 4 08:32:17 gaz kernel: [204779.842304] php5-cgi[22090]: segfault at 18 ip 0000000000689e5e sp 00007fff677a6a48 error 6 in php5-cgi[400000+6f9000] Mar 4 10:01:02 gaz kernel: [210104.434706] rsync[22236] general protection ip:7f14a07137f9 sp:7fff88f940b8 error:0 in libc-2.11.2.so[7f14a069d000+158000] Mar 4 11:32:22 gaz kernel: [215584.262316] BUG: unable to handle kernel paging request at 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262331] IP: [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262343] PGD 0 Mar 4 11:32:22 gaz kernel: [215584.262350] Oops: 0010 [#2] SMP Mar 4 11:32:22 gaz kernel: [215584.262359] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 4 11:32:22 gaz kernel: [215584.262371] CPU 1 Mar 4 11:32:22 gaz kernel: [215584.262378] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_mce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 4 11:32:22 gaz kernel: [215584.262552] Pid: 1960, comm: proxymap Tainted: G D 2.6.32-5-amd64 #1 MS-7368 Mar 4 11:32:22 gaz kernel: [215584.262563] RIP: 0010:[<00000000ffffff9c>] [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262573] RSP: 0018:ffff880209257e00 EFLAGS: 00010212 Mar 4 11:32:22 gaz kernel: [215584.262580] RAX: ffff8801514eb780 RBX: ffffffff810efb2d RCX: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262590] RDX: 0000000000000020 RSI: 0000000000000001 RDI: ffff8801514eb780 Mar 4 11:32:22 gaz kernel: [215584.262600] RBP: 00000000ffffffe9 R08: 0000000000000000 R09: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262611] R10: ffff880209257e78 R11: ffffffff81152c7c R12: 0000000000000001 Mar 4 11:32:22 gaz kernel: [215584.262622] R13: 0000000000008001 R14: 0000000000000024 R15: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262633] FS: 00007fca4de35700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 4 11:32:22 gaz kernel: [215584.262650] CR2: 00000000ffffff9c CR3: 00000001c9cbb000 CR4: 00000000000006e0 Mar 4 11:32:22 gaz kernel: [215584.262661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262671] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 4 11:32:22 gaz kernel: [215584.262682] Process proxymap (pid: 1960, threadinfo ffff880209256000, task ffff88021c4b1c40) Mar 4 11:32:22 gaz kernel: [215584.262693] Stack: Mar 4 11:32:22 gaz kernel: [215584.262698] ffffffff810f8566 ffff880209257e78 ffff88021c7bf000 ffff88021c7bf0c8 Mar 4 11:32:22 gaz kernel: [215584.262709] <0> 0000800000000000 ffff88021fc0f000 ffff880209257e78 00000000fffffffe Mar 4 11:32:22 gaz kernel: [215584.262724] <0> ffffffff810e5881 ffff880209257f48 0000000000000286 ffff88021fc0f000 Mar 4 11:32:22 gaz kernel: [215584.262743] Call Trace: Mar 4 11:32:22 gaz kernel: [215584.262753] [<ffffffff810f8566>] ? do_filp_open+0xa7/0x94b Mar 4 11:32:22 gaz kernel: [215584.262763] [<ffffffff810e5881>] ? virt_to_head_page+0x9/0x2a Mar 4 11:32:22 gaz kernel: [215584.262771] [<ffffffff810f9904>] ? user_path_at+0x52/0x79 Mar 4 11:32:22 gaz kernel: [215584.262779] [<ffffffff810cfec1>] ? get_unmapped_area+0xd7/0x139 Mar 4 11:32:22 gaz kernel: [215584.262787] [<ffffffff811019d5>] ? alloc_fd+0x67/0x10c Mar 4 11:32:22 gaz kernel: [215584.262795] [<ffffffff810eceaf>] ? do_sys_open+0x55/0xfc Mar 4 11:32:22 gaz kernel: [215584.262804] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 4 11:32:22 gaz kernel: [215584.262811] Code: Bad RIP value. Mar 4 11:32:22 gaz kernel: [215584.262819] RIP [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262828] RSP <ffff880209257e00> Mar 4 11:32:22 gaz kernel: [215584.262833] CR2: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.263077] ---[ end trace 1cc1473b539c7f6f ]--- As you can see there are segfaults, a general protection fault and a Kernel Oops. My first guess was that there's a Hardware problem of some sort and I asked my Hoster (it's a rented root server) to do a full hardwarecheck - they did, but couldn't find any problem. I don't know what and how they checked but their support team is usually quite good. I ran memtester and cpuburn myself and couldn't find any error either. Unfortunately I have no reliable way to reproduce these segfaults, they seem to be more or less random. On a hunch I disabled the firewall of the system and ran one of the programs that segfaulted regularily (imapsync) and it seemed to take longer to segfault than before, so the problem might be related to the network stack. Or could just be a random thing. Here are the kernel specs: # uname -a Linux gaz 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 GNU/Linux # cat /etc/debian_version 6.0 # lsmod Module Size Used by cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_conservative 5162 0 xt_recent 5977 0 xt_tcpudp 2319 0 iptable_nat 4299 0 nf_nat 13388 1 iptable_nat nf_conntrack_ipv4 9833 3 iptable_nat,nf_nat nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 ip6table_filter 2384 0 ip6_tables 15075 1 ip6table_filter xt_DSCP 1995 0 xt_TCPMSS 2919 0 ipt_LOG 4518 0 ipt_REJECT 1953 0 iptable_mangle 2817 0 iptable_filter 2258 0 xt_multiport 2267 0 xt_state 1303 0 xt_limit 1782 0 xt_conntrack 2407 0 nf_conntrack_ftp 5537 0 nf_conntrack 46535 6 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state,xt_conntrack,nf_conntrack_ftp ip_tables 13899 3 iptable_nat,iptable_mangle,iptable_filter x_tables 12845 13 xt_recent,xt_tcpudp,iptable_nat,ip6_tables,xt_DSCP,xt_TCPMSS,ipt_LOG,ipt_REJECT,xt_multiport,xt_state,xt_limit,xt_conntrack,ip_tables loop 11799 0 radeon 573996 0 ttm 39986 1 radeon drm_kms_helper 20065 1 radeon snd_hda_codec_atihdmi 2251 1 drm 142359 3 radeon,ttm,drm_kms_helper snd_hda_intel 20019 0 i2c_algo_bit 4225 1 radeon pcspkr 1699 0 i2c_piix4 8328 0 snd_hda_codec 54244 2 snd_hda_codec_atihdmi,snd_hda_intel i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4 snd_hwdep 5380 1 snd_hda_codec snd_pcm 60503 2 snd_hda_intel,snd_hda_codec snd_timer 15582 1 snd_pcm snd 46446 5 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 4598 1 snd evdev 7352 3 snd_page_alloc 6249 2 snd_hda_intel,snd_pcm k8temp 3283 0 edac_core 29261 0 edac_mce_amd 6433 0 shpchp 26264 0 pci_hotplug 21203 1 shpchp button 4650 0 ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 dm_mod 53754 0 powernow_k8 10978 1 aacraid 59779 0 3w_9xxx 28684 0 3w_xxxx 20569 0 raid10 17809 0 raid456 44500 0 async_raid6_recov 5170 1 raid456 async_pq 3479 2 raid456,async_raid6_recov raid6_pq 77179 2 async_raid6_recov,async_pq async_xor 2478 3 raid456,async_raid6_recov,async_pq xor 4380 1 async_xor async_memcpy 1198 2 raid456,async_raid6_recov async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy raid1 18431 3 raid0 5517 0 md_mod 73824 7 raid10,raid456,raid1,raid0 sata_nv 19166 0 sata_sil 7412 0 sata_via 7928 0 sd_mod 29889 8 crc_t10dif 1276 1 sd_mod ata_generic 3047 0 ahci 32374 6 r8169 29229 0 mii 3210 1 r8169 thermal 11674 0 pata_atiixp 3489 0 libata 133632 6 sata_nv,sata_sil,sata_via,ata_generic,ahci,pata_atiixp ohci_hcd 19212 0 ehci_hcd 31151 0 processor 29935 1 powernow_k8 thermal_sys 11942 2 thermal,processor scsi_mod 122149 5 aacraid,3w_9xxx,3w_xxxx,sd_mod,libata usbcore 122034 3 ohci_hcd,ehci_hcd nls_base 6377 1 usbcore # free total used free shared buffers cached Mem: 8166128 1228036 6938092 0 140412 782060 -/+ buffers/cache: 305564 7860564 Swap: 2102456 0 2102456 So, basically my questions are: How can I diagnose this further? Is there any data in the log above that could help me to isolate the troublemaker? Are there any known problems with the above hardware/software I overlooked when googling for it? Is there a way to prevent the kernel from autoloading modules (I probably don't need all these modules and one of them might be the culprit)

  Read the article

• How do I get more information on a potential network freeloader?

  - by Dov

  I have a home network set up, complete with a relatively good password. I'm in Mac OS X 10.6 (Snow Leopard) and have been noticing, on occasion, a computer showing up in my Finder's Shared section, that is not one of my own (the "pe-xpjalle" box pictured below). He has a tendency to come and go. How can I figure out his MAC address or something, so I can block him? I checked my "Logs and Statistics" in the Airport Utility, and didn't see that computer under DHCP clients. I'd rather not change my password, since I have quite a few devices I'd have to update. Is there any other reason he's show up on my network besides having guessed my password? Update: I fixed the Dropbox URL above (how embarrassing, I'm new to Dropbox. Thanks for the heads up, Doug.) Update 2: I tried clicking on "Connect as..." just for the hell of it, and got the dialog below. Now I have even less an idea what's going on than before. I don't have Parallels of VMware running, just the following: Transmission, NetNewsWire, Mail, Things, Safari, iTunes, Photoshop, Pages, Yojimbo, Preferences, AppleScript Editor, Software Update, Airport Utility, and Terminal. I don't think any of those create a virtual network machine, right? And no VMware machine of mine has ever had a name resembling "pe-xpjalle". Update 3: I just changed my passwords on both my N- and G-only networks, and I'm still seeing this, so I highly doubt that it's someone who's figured out my password (twice now). I'm really stumped.

  Read the article

• Chef: nested data bag data to template file returns "can't convert String into Integer"

  - by Dalho Park

  I'm creating simple test recipe with a template and data bag. What I'm trying to do is creating a config file from data bag that has simple nested information, but I receive error "can't convert String into Integer" Here are my setting file 1) recipe/default.rb data1 = data_bag_item( 'mytest', 'qa' )['test'] data2 = data_bag_item( 'mytest', 'qa' ) template "/opt/env/test.cfg" do source "test.erb" action :create_if_missing mode 0664 owner "root" group "root" variables({ :pepe1 = data1['part.name'], :pepe2 = data2['transport.tcp.ip2'] }) end 2)my data bag named "mytest" $knife data bag show mytest qa id: qa test: part.name: L12 transport.tcp.ip: 111.111.111.111 transport.tcp.port: 9199 transport.tcp.ip2: 222.222.222.222 3)template file test.erb part.name=<%= @pepe1 % transport.tcp.binding=<%= @pepe2 % Error reurns when I run chef-client on my server, [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in from_file' [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in[]',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in block in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:infrom_file' [2013-06-24T19:50:38+00:00] DEBUG: backtrace entry for compile error: '/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in `[]'' [2013-06-24T19:50:38+00:00] DEBUG: Line number of compile error: '19' Recipe Compile Error in /var/chef/cache/cookbooks/config_test/recipes/default.rb TypeError can't convert String into Integer Cookbook Trace: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []' /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file' /var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in `from_file' Relevant File Content: /var/chef/cache/cookbooks/config_test/recipes/default.rb: 12: template "/opt/env/test.cfg" do 13: source "test.erb" 14: action :create_if_missing 15: mode 0664 16: owner "root" 17: group "root" 18: variables({ 19 :pepe1 = data1['part.name'], 20: :pepe2 = data2['transport.tcp.ip2'] 21: }) 22: end 23: I tried many things and if I comment out "pepe1 = data1['part.name'],", then :pepe2 = data2['transport.tcp.ip2'] works fine. only nested data "part.name" cannot be set to @pepe1. Does anyone knows why I receive the errors? thanks,

  Read the article

• Installinf Xen 4.0.1 in Ubuntu 10.10

  - by Hiranth

  make -f buildconfigs/mk.linux-2.6-pvops build make[3]: Entering directory /home/hirantha/xen-4.0.1' set -ex; \ if ! [ -d linux-2.6-pvops.git ]; then \ rm -rf linux-2.6-pvops.git linux-2.6-pvops.git.tmp; \ mkdir linux-2.6-pvops.git.tmp; rmdir linux-2.6-pvops.git.tmp; \ git clone -o xen -n git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-pvops.git.tmp; \ (cd linux-2.6-pvops.git.tmp; git checkout -b xen/stable-2.6.32.x xen/xen/stable-2.6.32.x ); \ mv linux-2.6-pvops.git.tmp linux-2.6-pvops.git; \ fi + '[' -d linux-2.6-pvops.git ']' + rm -rf linux-2.6-pvops.git linux-2.6-pvops.git.tmp + mkdir linux-2.6-pvops.git.tmp + rmdir linux-2.6-pvops.git.tmp + git clone -o xen -n git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-pvops.git.tmp Initialized empty Git repository in /home/hirantha/xen-4.0.1/linux-2.6-pvops.git.tmp/.git/ fatal: Unable to look up git.kernel.org (port 9418) (Name or service not known) make[3]: *** [linux-2.6-pvops.git/.valid-src] Error 128 make[3]: Leaving directory/home/hirantha/xen-4.0.1' make[2]: * [linux-2.6-pvops-install] Error 2 make[2]: Leaving directory /home/hirantha/xen-4.0.1' make[1]: *** [install-kernels] Error 1 make[1]: Leaving directory/home/hirantha/xen-4.0.1' make: * [world] Error 2 hirantha@hirantha-desktop:~/xen-4.0.1$ ^C hirantha@hirantha-desktop:~/xen-4.0. What is this error? How can i solve this?

  Read the article

• Making OpenSSL work on PHP Windows 2008 server with FastCGI

  - by KacieHouser

  I have been researching all day. Here is what I have done: In C:/PHP/php.ini and C:/PHP/php-cgi-fcgi.ini I have made the extension_dir = "C:/PHP/ext" I uncommented extension=php_openssl.dll I went to http://windows.php.net/download/ and got the thread safe version with the PHP 5.4 (5.4.8) version of DLL's In C:/PHP/ext I replaced the php_openssl.dll with the one I downloaded In System32 and SysWOW64 I added the following DLL's ssleay.dll libeay.dll I restarted the IIS server in the Server Manager under Web Server and stopped and started the World Wide Web Publishing Service That didn't work, so I tried same thing with the unthreaded versions. I still get: Fatal error: Call to undefined function ftp_ssl_connect() in C:\inetpub\wwwroot\REMOVED_dev\save_data.php on line 5 Here are related things from phpinfo(): System Windows NT DEV-WEB1 6.1 build 7601 (Windows Server 2008 R2 Standard Edition Service Pack 1) i586 Compiler MSVC9 (Visual C++ 2008) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=C:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze" "--with-pgo" Server API CGI/FastCGI Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\PHP\php-cgi-fcgi.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, compress.bzip2, https, ftps, sqlsrv, phar Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls FTP support enabled Protocols dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, pop3, pop3s, rtsp, scp, sftp, smtp, smtps, telnet, tftp openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8t 18 Jan 2012 OpenSSL Header Version OpenSSL 0.9.8x 10 May 2012 What am I missing here?

  Read the article

• How to write files in specific order?

  - by Bernie

  Okay, here's a weird problem -- My wife just bought a 2014 Nissan Altima. So, I took her iTunes library and converted the .m4a files to .mp3, since the car audio system only supports .mp3 and .wma. So far so good. Then I copied the files to a DOS FAT-32 formatted USB thumb drive, and connected the drive to the car's USB port, only to find all of the tracks were out of sequence. All tracks begin with a two digit numeric prefix, i.e., 01, 02, 03, etc. So you would think they would be in order. So I called Nissan Connect support and the rep told me that there is a known problem with reading files in the correct order. He said the files are read in the same order they are written. So, I manually copied a few albums with the tracks in a predetermined order, and sure enough he was correct. So I copied about 6 albums for testing, then changed to the top level directory and did a "find . music.txt". Then I passed this file to rsync like this: rsync -av --files-from=music.txt . ../Marys\ Music\ Sequenced/ The files looked like they were copied in order, but when I listed the files in order of modified time, they were in the same sequence as the original files: ../Marys Music Sequenced/Air Supply/Air Supply Greatest Hits ls -1rt 01 Lost In Love.mp3 04 Every Woman In The World.mp3 03 Chances.mp3 02 All Out Of Love.mp3 06 Here I Am (Just When I Thought I Was Over You).mp3 05 The One That You Love.mp3 08 I Want To Give It All.mp3 07 Sweet Dreams.mp3 11 Young Love.mp3 So the question is, how can I copy files listed in a file named music.txt, and copy them to a destination, and ensure the modification times are in the same sequence as the files are listed?

  Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >