Search Results

Search found 18766 results on 751 pages for 'me again'.

Page 478/751 | < Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >

  • What is the best way to implement collision detection using Bullet physics engine and a track generated from a curve?

    - by tigrou
    I am developing a small racing game were the track is generated from a curve. As said above, the track is generated, but not infinite. The track of one level could fit with no problem in memory and will contain a reasonably small amount of triangles. For collisions, I would like to use Bullet physics engine and know what is the best way to handle collisions with the track efficiently. NOTE : The track will be stored as a static rigid body (mass = 0). The player will be represented by a sphere shape for collisions. Here is some possibilities i have in mind : Create one rigid body, then, put all triangles of the track (except non collidable stuff) into it. Result : 1 body with many triangles (eg : 30000 triangles) Split the track into several sections (eg: 10 sections). Then, for each section, create a rigid body and put corresponding triangles in it. Result : small amount of bodies with relatively small amount of triangles (eg : 1500 triangles per section). Split the track into many sub-sections (eg : 1200 sections). Here one subsection = very small step when generating the curve. Again for each sub-section, create a body and put triangles in it. Result : many bodies with very small amount of triangles (eg : 20 triangles). Advantage : it could be possible to "extra data" to each of the subsection, that could be used when handling collisions. Same as 2, but only put sections N and N+1 in physics engine (where N = current section where the player is). When player reach section N+1, unload section N and load section N+2 and so on... Issue : harder to implement, problems if the player suddenly "jump" from one section to another (eg : player fly away from section N, and fall on section N + 4 that was underneath : no collision handled, player will fall into void ) Same as 4, but with many sub-sections. Issues : since subsections are very small there will be constantly new bodies added and removed to physics engine at runtime. Possibilities for player to accidently skip some sections and fall into the void are higher than 4.

    Read the article

  • Windows 8 and the future of Silverlight

    - by Laila
    After Steve Ballmer's indiscrete 'MisSpeak' about Windows 8, there has been a lot of speculation about the new operating system. We've now had a few glimpses, such as the demonstration of 'Mosh' at the D9 2011 conference, and the Youtube video, which showed a touch-centric new interface for apps built using HTML5 and JavaScript. This has caused acute anxiety to the programmers who have followed the recommended route of WPF, Silverlight and .NET, but it need not have caused quite so much panic since it was, in fact, just a thin layer to make Windows into an apparently mobile-friendly OS. More worryingly, the press-release from Microsoft was at pains to say that 'Windows 8 apps use the power of HTML5, tapping into the native capabilities of Windows using standard JavaScript and HTML', as if all thought of Silverlight, dominant in WP7, had been jettisoned. Ironically, this brave new 'happening' platform can all be done now in Windows 7 and an iPad, using Adobe Air, so it is hardly cutting-edge; in fact the tile interface had a sort of Retro-Zune Metro UI feel first seen in Media Centre, followed by Windows Phone 7, with any originality leached out of it by the corporate decision-making process. It was kinda weird seeing old Excel running alongside stodgily away amongst all the extreme paragliding videos. The ability to snap and resize concurrent apps might be a novelty on a tablet, but it is hardly so on a PC. It was at that moment that it struck me that here was a spreadsheet application that hadn't even made the leap to the .NET platform. Windows was once again trying to be all things to all men, whereas Apple had carefully separated Mac OS X development from iOS. The acrobatic feat of straddling all mobile and desktop devices with one OS is looking increasingly implausible. There is a world of difference between an operating system that facilitates business procedures and a one that drives a device for playing pop videos and your holiday photos. So where does this leave Silverlight? Pretty much where it was. Windows 8 will support it, and it will continue to be developed, but if these press-releases reflect the thinking within Microsoft, it is no longer seen as the strategic direction. However, Silverlight is still there and there will be a whole new set of developer APIs for building touch-centric apps. Jupiter, for example, is rumoured to involve an App store that provides new, Silverlight based "immersive" applications that are deployed as AppX packages. When the smoke clears, one suspects that the Javascript/HTML5 is merely an alternative development environment for Windows 8 to attract the legions of independent developers outside the .NET culture who are unlikely to ever take a shine to a more serious development environment such as WPF or Silverlight. Cheers, Laila

    Read the article

  • Accessing SQL Server data from iOS apps

    - by RobertChipperfield
    Almost all mobile apps need access to external data to be valuable. With a huge amount of existing business data residing in Microsoft SQL Server databases, and an ever-increasing drive to make more and more available to mobile users, how do you marry the rather separate worlds of Microsoft's SQL Server and Apple's iOS devices? The classic answer: write a web service layer Look at any of the questions on this topic asked in Internet discussion forums, and you'll inevitably see the answer, "just write a web service and use that!". But what does this process gain? For a well-designed database with a solid security model, and business logic in the database, writing a custom web service on top of this just to access some of the data from a different platform seems inefficient and unnecessary. Desktop applications interact with the SQL Server directly - why should mobile apps be any different? The better answer: the iSql SDK Working along the lines of "if you do something more than once, make it shared," we set about coming up with a better solution for the general case. And so the iSql SDK was born: sitting between SQL Server and your iOS apps, it provides the simple API you're used to if you've been developing desktop apps using the Microsoft SQL Native Client. It turns out a web service remained a sensible idea: HTTP is much more suited to the Big Bad Internet than SQL Server's native TDS protocol, removing the need for complex configuration, firewall configuration, and the like. However, rather than writing a web service for every app that needs data access, we made the web service generic, serving only as a proxy between the SQL Server and a client library integrated into the iPhone or iPad app. This client library handles all the network communication, and provides a clean API. OSQL in 25 lines of code As an example of how to use the API, I put together a very simple app that allowed the user to enter one or more SQL statements, and displayed the results in a rather primitively formatted text field. The total amount of Objective-C code responsible for doing the work? About 25 lines. You can see this in action in the demo video. Beta out now - your chance to give us your suggestions! We've released the iSql SDK as a beta on the MobileFoo website: you're welcome to download a copy, have a play in your own apps, and let us know what we've missed using the Feedback button on the site. Software development should be fun and rewarding: no-one wants to spend their time writing boiler-plate code over and over again, so stop writing the same web service code, and start doing exciting things in the new world of mobile data!

    Read the article

  • Fixing a NoClassDefFoundError

    - by Chris Okyen
    I have some code: package ftc; import java.util.Scanner; public class Fer_To_Cel { public static void main(String[] argv) { // Scanner object to get the temp in degrees Farenheit Scanner keyboard = new Scanner(System.in); boolean isInt = true; // temporarily put as true in case the user enters a valid int the first time int degreesF = 0; // initialy set to 0 do { try { // Input the temperature text. System.out.print("\nPlease enter a temperature (integer number, no fractional part) in degrees Farenheit: "); degreesF = Integer.parseInt(keyboard.next()); // Get user input and Assign the far. temperature variable, which is casted from String to int. } // Let the user know in a user friendly notice that the value entered wasnt an int ( give int value range ) , and then give error log catch(java.lang.Exception e) { System.out.println("Sorry but you entered a non-int value ( needs to be between ( including ) -2,147,483,648 and 2,147,483,647 ).. \n"); e.printStackTrace(); isInt = false; } } while(!isInt); System.out.println(""); // print a new line. final int degreesC = (5*(degreesF-32)/9); // convert the degrees from F to C and store the resulting expression in degreesC // Print out a newline, then print what X degrees F is in Celcius. System.out.println("\n" + degreesF + " degrees Farenheit is " + degreesC + " degrees Celcius"); } } And The following error: C:\Program Files\Java\jdk1.7.0_06\bin>java Fer_To_Cel Exception in thread "main" java.lang.NoClassDefFoundError: Fer_To_Cel (wrong name: ftc/Fer_To_Cel) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:791) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:14 at java.net.URLClassLoader.defineClass(URLClassLoader.java:449) at java.net.URLClassLoader.access$100(URLClassLoader.java:71) at java.net.URLClassLoader$1.run(URLClassLoader.java:361) at java.net.URLClassLoader$1.run(URLClassLoader.java:355) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:354) at java.lang.ClassLoader.loadClass(ClassLoader.java:423) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:356) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:480) The code compiled without compile errors, but presented errors during execution. Which leads me to two questions. I know Errors can be termed Compiler, Runtime and Logic Errors, but the NoClassDefFoundError inherits java.lang.LinkageError. Does that make it a Linker error, being niether of the three types of errors I listed, If I am right this is the answer. For someone else who obtains the singular .java file and compiles it, would this be the only way to solve this problem? Or can I (should I ) do/have done something to fix this problem? Basically, based on a basis of programming, is this a fault of me as the writer? Could this be done once on, my half and be distributed and not needed be done again?

    Read the article

  • Can see samba shares but not access them

    - by nitefrog
    For the life of me I cannot figure this one out. I have samba installed and set up on the ubuntu box and on the Win7 box I CAN SEE all the shares I created. I created two users on ubuntu that map to the users in windows. On ubuntu they are both admins, user A & B on Windows User A is admin and user B is poweruser. User A can see both shares and access them, but user B can see everythin, but only access the homes directory, the other directory throws an error. I have two drives in Ubuntu and this is the smb.config file (I am new to samba): [global] workgroup = WORKGROUP server string = %h server (Samba, Ubuntu) wins support = no dns proxy = yes name resolve order = lmhosts host wins bcast log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ; usershare max shares = 100 usershare allow guests = yes And here is the share section: Both user A & B can access this from windows. No problems. [homes] comment = Home Directories browseable = no writable = yes Both User A & B can see this share, but only user A can access it. User B get an error thrown. [stuff] comment = Unixmen File Server path = /media/data/appinstall/ browseable = yes ;writable = no read only = yes hosts allow = The permission for the media/data/appinstall/ is as follows: appInstall properties: share name: stuff Allow others to create and delete files in this folder is cheeked Guest access (for people without a user account) is checked permissions: Owner: user A Folder Access: Create and delete files File Access: --- Group: user A Folder Access: Create and delete files File Access: --- Others Folder Access: Create and delete files File Access: --- I am at a loss and need to get this work. Any ideas? The goal is to have a setup like this. 3 users on window machines. Each user on the data drive will have their own personal folder where they are the ones that can only access, then another folder where 2 of the users will have read only and one user full access. I had this setup before on windows, but after what happened I am NEVER going back to windows, so Unix here I am to stay! I am really stuck. I am running Ubuntu 11. I could reformat again and put on version 10 if that would make life easier. I have been dealing with this since Wed. 3pm. Thanks.

    Read the article

  • How to show pending messages using WLST?

    - by lmestre
    Here are the steps: 1. . ./setDomainEnv.sh2. java weblogic.WLST3. connect('weblogic','welcome1','t3://localhost:7001')4. domainRuntime()5. cd('ServerRuntimes/MS1/JMSRuntime/MS1.jms/JMSServers/JMSServer1/Destinations/JMSModule1!Queue1')6. cursor1=cmo.getMessages('true',9999999,10)                                                 **String(selector),Integer(timeout),Integer(state)7. msgs = cmo.getNext(cursor1, 10)                  ** This step gets 10 messages, you can call again cmo.getNext(cursor1, 10) to get the next 10 msgs8. print(msgs)My assumption, is that you had created:a. Managed Server MS1.b. JMS Server JMSServer1.c. Module called JMSModule1.d. Inside of JMSModule1, a Queue called Queue1.If you read my previous post:How to get Messages Pending Count from a Queue using WLST? https://blogs.oracle.com/LuzMestre/entry/how_to_get_messages_pendingYou can see that both are very similar.  Sometimes it is difficult to get a WLST Script sample, but you can use ls() function to know about other functionalities you don't have a sample code.***Until step 5, nothing new comparing to my previous post.5. cd('ServerRuntimes/MS1/JMSRuntime/MS1.jms/JMSServers/JMSServer1/Destinations/JMSModule1!Queue1')6. ls()You will see, MessagesPendingCount, getMessages along a lot of other functionalities available in this Queue. e.g, you can see:-r-x   getMessages                                  String : String(selector),Integer(timeout),Integer(state)Here you can check the complete MBean Reference:http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/core/index.htmlSee JMSDestinationRuntimeMBean.Enjoy!

    Read the article

  • SEO effects of intermix of WP blog, custom PHP site and FB app game

    - by melbournetechlover
    We're a melbourne tech company in the process of building a custom site in PHP. We plan to launch a "pre-launch" page which is also custom coded (CSS3 on twitter bootstrap framework + HTML5 front end and PHP back end). On that site will be a link to a blog - the idea behind this is to build up ranking for a variety of relevant keywords prior to the full site going live (given the majority of the site is a member only community anyway so the blog is really the main way we'll be able to execute on-site SEO. Ideally, we would like to install wordpress in a subdirectory on our servers and just customise the header to look the same as the landing page of the website. But some questions and concerns... Is there any detrimental effect on SEO efforts in having two separate systems (one custom PHP, the other an installation of wordpress) to manage the blog vs the rest of the site? Are there any benefits or detriments to installing on a sub domain such as blog.sitename.com vs. sitename.com/blog. My preference would be sitename.com/blog as it feels neater - but open to suggestions based on knowledge of Google preferences. Separately, we are building a Facebook app which is under another site name. Again because we are launching this app first, from an SEO perspective, would it actually be better to run it from a sub domain on the main site - e.g. gamename.mainsitename.com instead of on app.gamename.com? Currently we have it on app.gamename.com, but if there are SEO benefits to moving it to the other domain and server then we'll do it. Basically we don't want to have our SEO efforts divided - will Google algorithms prefer two sites heavily referring traffic, or is it better to focus our efforts on one. I guess that's the crux of the issue. But the other one is - does Google care about traffic accessing a page built for the Facebook app iFrame - does that count toward rankings? Sorry I hope these questions aren't too complex - but we're in the tech world every day and still can't seem to find a good answer to these ones...hence I'm taking to the forums!! Free beer for whoever can give me a solid answer!

    Read the article

  • "Hello World" in C++ AMP

    - by Daniel Moth
    Some say that the equivalent of "hello world" code in the data parallel world is matrix multiplication :) Below is the before C++ AMP and after C++ AMP code. For more on what it all means, watch the recording of my C++ AMP introduction (the example below is part of the session). void MatrixMultiply(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W ) { for (int y = 0; y < M; y++) { for (int x = 0; x < N; x++) { float sum = 0; for(int i = 0; i < W; i++) { sum += vA[y * W + i] * vB[i * N + x]; } vC[y * N + x] = sum; } } } Change the function to use C++ AMP and hence offload the computation to the GPU, and now the calling code (which I am not showing) needs no changes and the overall operation gives you really nice speed up for large datasets…  #include <amp.h> using namespace concurrency; void MatrixMultiply(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W ) { array_view<const float,2> a(M, W, vA); array_view<const float,2> b(W, N, vB); array_view<writeonly<float>,2> c(M, N, vC); parallel_for_each( c.grid, [=](index<2> idx) mutable restrict(direct3d) { float sum = 0; for(int i = 0; i < a.x; i++) { sum += a(idx.y, i) * b(i, idx.x); } c[idx] = sum; } ); } Again, you can understand the elements above, by using my C++ AMP presentation slides and recording… Stay tuned for more… Comments about this post welcome at the original blog.

    Read the article

  • The Uganda .NET Usergroup meeting for January 2011 - a look back.

    - by Malisa L. Ncube
    We had a very interesting meeting on Friday 28th last week. We had 10 attendees and two speakers. The first topic presented was Cloud Computing, presented by Allan Rwakatungu @arwakatungu who works with MTN Uganda. He gave a very brilliant outline of how Cloud computing and service oriented applications had begun changing the platform for operating business and the costs it saves because of scalability and elasticity. He went on to demonstrate the steps you would take if you are beginning a new Windows Azure project. He explained the history and evolution of the Windows Azure, SQL Azure and cloud services offered by Amazon and google.com. The attendees had many questions to ask (obviously), but they were all answered very well. We once again thank Allan, for taking time to prepare the presentation and demonstrating for us. We recorded a video on the entire presentation and after doing some editing we will publish it. One wish which was echoed by most members was that Microsoft should open the cloud services and development for Africa. Microsoft currently does not even have servers here in Africa and so far, that does not put African developers in the same platform as other developers in other continents. Now is the time considering the improvements in network speeds and joining of the Seacom network and broadband.   I presented on Parallelism and Multithreading using .NET 4.0, I also gave some details on the language changes in C# 5.0 and the async keyword and the TaskEx class. I explained the Task, Scheduling of parallel tasks and demonstrated problems that may arise from using parallelism inappropriately. I also demonstrated the performance improvements that may be achieved by taking advantage of multi-core processors. You may download the presentation on Parallelism and Multi-threading from here. The resolution of the meeting was that we should meet more than once a month and begin other activities which should be more fun. e.g. Geek Dinner, Geek Beer or CodeCamp. Based on that we all agreed we shall have a mid-month meeting starting from February. Cheers folks! del.icio.us Tags: .net,usergroup,cloud computing,parallelism,multi-threading

    Read the article

  • Dependency problems installing wine 1.5 on ubuntu 12.04 x64

    - by Moreno
    I tried: $ sudo add-apt-repository ppa:ubuntu-wine/ppa $ sudo apt-get update $ sudo apt-get install wine1.5 result was: $ sudo apt-get install wine1.5 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.6-0ubuntu1~pulse17) E: Unable to correct problems, you have held broken packages. then I tried: $ sudo dpkg --configure -a $ sudo apt-get install -f result was: $ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. after all I tried: $ sudo apt-get build-dep wine1.5 Reading package lists... Done Building dependency tree Reading state information... Done The following packages have unmet dependencies: libgnutls-dev : Depends: libgnutls26 (= 2.12.14-5ubuntu3) but 2.12.19-1 is to be installed Depends: libgnutlsxx27 (= 2.12.14-5ubuntu3) but it is not going to be installed Depends: libgnutls-openssl27 (= 2.12.14-5ubuntu3) but it is not going to be installed E: Build-dependencies for wine1.5 could not be satisfied. also tried: $ sudo apt-get install -y ia32-libs Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. Using synaptic: using ubuntu software center (USC): Somebody can help me? Thanks. Trying again: $ sudo dpkg --configure -a $ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 14 not upgraded. $ sudo apt-get install wine1.5 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.10-0ubuntu1~pulse19+build4) E: Unable to correct problems, you have held broken packages.

    Read the article

  • Looking for an ultra portable laptop for Ubuntu

    - by prule
    Hi, I'm in the market for a new laptop, and portability is important since I really only use it when I'm travelling to and from work - primarily for programming. I've been searching high and low for something like this: less than 2kg hopefully Intel i5 (but negotiable) NO dvd drive - just don't need it 4G ram either 7200rpm disk or SSD (ssd preferable) 13 inch screen not too pricey (MacBook Air is about $1700 AUD) available in Australia The Dell Inspiron 13z and Lenovo Edge 13 look close, but I've not found anything that says I'm not going to have a fight with compatibility. The MacBook Air 13 looks like the PERFECT hardware, but I'm afraid it will just be easier to run MacOS than Ubuntu. I want to stay with Ubuntu, but the MacBook Air is only $1700 so I'm in danger of becoming another apple fanboi if I can't find anything competitive. Going through all the sites looking for stuff has been a huge waste of time System 76 doesn't deliver to Australia http://www.linux-laptop.net/ and http://www.linlap.com/ are hard work and not confidence inspiring http://www.vgcomputing.com.au/nsintro.html is hard work again, searching for every laptop they say has excellent compatibility on the web to find out what spec it is http://zareason.com/shop/Strata-Pro-13.html (at $1345 USD) looks interesting, but I've got no idea how much I'll get stung by customs importing Dell Inspiron 13z with i5, 4G, 320 7200rpm disk, ATI Mobility Radeon HD5430 - 1GB, Dell Wireless 1501 802.11b/g/n @ $1200 AUD seems like the only competitor but is it compatible? (Dell support offer no opinion - as far as they are concerned they only have 2 models that are certified for ubuntu) Am I worrying too much about the compatibility? Should I just go with Dell? Or switch to MacOS? (It would be good to have a searchable database that had the full machine specs, and compatibility - I'm thinking about building something... but I don't have much time right now...) Thanks. UPDATE I went with a MacBook Air. The price/weight/power was just right. Everything else was either too pricy (i5) or too heavy, or underpowered (SU7300 1.3GHz). Its a pity, because I didn't really want to leave Ubuntu. I'll still run it on my media center and spare (heavy) laptop.

    Read the article

  • Oracle BPM and Open Data integration development

    - by drrwebber
    Rapidly developing Oracle BPM application solutions with data source integration previously required significant Java and JDeveloper skills. Now using open source tools for open data development significantly reduces the coding needed.  Key tasks can be performed with visual drag and drop designing combined with menu selections entry and automatic form generation directly from XSD schema definitions. The architecture used is extremely lightweight, portable, open platform and scalable allowing integration with a variety of Oracle and non-Oracle data sources and systems. Two videos available on YouTube walk through the process at both an introductory conceptual level and then a deep dive into the programming needed using JDeveloper, Oracle BPM composer and Oracle WLS (WebLogic Server) along with the CAM editor and Open-XDX open source tools. Also available are coding samples and resources from the GitHub project page, along with working online demonstration resources on the VerifyXML site. Combining Oracle BPM with these open source tools provides a comprehensive simple and elegant solution set. Development times are slashed and rapid prototyping is enabled. Also existing data sources can be integrated using open data formats with either XML or JSON along with CRUD accessing via the Open-XDX Java component. The Open-XDX tool is a code-free approach where data mapping is configured as templates using visual drag and drop in the CAM Editor open source tool.  XML or JSON is then automatically generated or processed (output or input) and appropriate SQL statements created to support the data accessing.   Also included is the ability to integrate with fillable PDF forms via the XML templates and the Java PDF form filling library.  Again minimal Java coding is needed to associate the XML source content with the PDF named fields.  The Oracle BPM forms can be automatically generated from XSD schema definitions that are built from the data mapping templates.  This dramatically simplifies development work as all the integration artifacts needed are created by the open source editor toolset. The developer level video is designed as a tutorial with segments, hands-on demonstrations and reviews.  This allows developers to learn the techniques and approaches used in incremental steps. The intended audience ranges from data analysts to developers and assumes only entry level Java skills and knowledge.  Most actions are menu driven while Java coding is limited to simply configuring values and parameters along with performing builds and deployments from JDeveloper and Oracle WLS.   Additional existing Oracle online training resources can be referenced on Oracle BPM and WLS that cover other normal delivery aspects such as user management and application deployment.

    Read the article

  • Move Data into the Grid for Scalable, Predictable Response Times

    - by JuergenKress
    CloudTran is pleased to introduce the availability of the CloudTran Transaction and Persistence Manager for creating scalable, reliable data services on the Oracle Coherence In-Memory Data Grid (IMDG). Use of IMDG architectures has been key to handling today’s web-scale loads because it eliminates database latency by storing important and frequently access data in memory instead of on disk. The CloudTran product lets developers easily use an IMDG for full ACID-compliant transactions without having to be concerned about the location or spread of data. The system has its own implementation of fast, scalable distributed transactions that does NOT depend on XA protocols but still guarantees all ACID properties. Plus, CloudTran asynchronously replicates data going into the IMDG to back-end datastores and back-up data centers, again ensuring ACID properties. CloudTran can be accessed through Java Persistence API (JPA via TopLink Grid) and now, through a new Low-Level API, or LLAPI. This is ideal for use in SOA applications that need data reliability, high availability, performance, and scalability. Still in limited beta release, the LLAPI gives developers the ability to use standard put/remove logic available in Coherence and then wrap logic with simple Spring annotations or XML+AspectJ to start transactions. An important feature of LLAPI is the ability to join transactions. This is a common outcome for SOA applications that need to reduce network traffic by aggregating data into single cache entries and then doing SOA service processing in the node holding the data. This results in the need to orchestrate transaction processing across multiple service calls. CloudTran has the capability to handle these “multi-client” transactions at speed with no loss in ACID properties. Developing software around an IMDG like Oracle Coherence is an important choice for today’s web-scale applications and services. But this introduces new architectural considerations to maintain scalability in light of increased network loads and data movement. Without using CloudTran, developers are faced with an incredibly difficult task to ensure data reliability, availability, performance, and scalability when working with an IMDG. Working with highly distributed data that is entirely volatile while stored in memory presents numerous edge cases where failures can result in data loss. The CloudTran product takes care of all of this, leaving developers with the confidence and peace of mind that all data is processed correctly. For those interested in evaluating the CloudTran product and IMDGs, take a look at this link for more information: http://www.CloudTran.com/downloadAPI.php, or, send your questions to [email protected]. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: Coherence,cloudtran,cache,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Building SANE from git-source produce backend missmatch on 12.04 even if built locally

    - by deinonychusaur
    It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

    Read the article

  • Ivy bridge i3 recognized as Xeon e3-1200

    - by user287072
    The situation: I've got a Ivy bridge i3 3225 which is being recognized as a Xeon e3-1200 series cpu by Ubuntu 14.04 64bit. The problem: cpu fan makes more noise than necessary (under dual-boot Win8 the fans are off), cannot install the intel graphics drivers from 01.org. Goals: - find a fix for the load fans could be they are not CPU related, I've tried some fan controller packages, but they made no difference. - get the intel graphics to install (this now fails as xeon cpu's are not supported, I got the package working on a i5 laptop) - get to know some more about how hardware recognition works Tried so far: - a reinstall of Ubuntu, but it was recognized again as a Xeon cpu. - different fan control packages, but they either do not recognized the fans, or just keep fan speed to high. Any pointers as how to get Ubuntu recognized it are more than welcome. lspci -nnQ 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 660] [10de:11c0] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)

    Read the article

  • Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

    - by Frank A
    I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

    Read the article

  • Them and us

    - by Plip
    As much as we try and create inclusive societies throughout the globe time and time again we revert to our tribal and clan origins back in the distant past, be those line split across the obvious like  Nationality, Religion or even the Football teams we follow. Microsoft to me has always been a “them”. I was always on the outside looking in, free to say as I wished and have an external objective viewpoint. Now, after my first week (well four days but who’s counting) Microsoft is an “us” for me. So when I look up in the Atrium of Building 1 at Microsoft’s UK headquarters I see banners like the one above and I already genuinely feel a part of this much bigger community. I looked up at that and I felt a sense of pride to be part of something bigger, something which is out there touching peoples lives everywhere (for the good and the bad). My objectivity has made me who I am today. I’m open to other ideas and concepts, I’ve worked hard to be understanding across the board be it from technology through to cultural differences in my life and it’s vital to me that I preserve that so I now have to learn how I balance the “them” of Microsoft to the “us” of Microsoft and maintain the objectivity. It’s my job to advise people on the best way to do things, which won’t always mean “Use Microsoft Technology X”, sometimes it’ll be my responsibility to say “Don’t use Microsoft Technology X”. My first and foremost responsibility is to the customer, to give them the best advice that I can and I want to maintain that. Yeah, I’m sure I’ll be tarred by some as a Microsoft guy, for many years I’ve had just that, but those out there in the non Microsoft communities I’ve engaged in I think know that I’m the first to say when I think something is a bit naff. So, here’s my ask to you ‘the community’. Keep me honest. If I start to sound like a fanboi I want you to find me and give me a slap. It’s all too easy to forget reality sometimes and I want to make sure I stay well and truly routed in that reality. Also, no matter how much I embed myself within Microsoft I fear I will never understand Microsoft’s marketing team. In the Gents just under the WP7 banner shown above I was faced with this. Draw your own conclusions on what it’s message is.

    Read the article

  • External hard drive issue

    - by Blind Fish
    I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

    Read the article

  • Quick run through of the WP7 Developer Tools January 2011

    - by mbcrump
    In case you haven’t heard the latest WP7 Developers Tool update was released yesterday and contains a few goodies. First you need to go and grab the bits here. You can install them in any order, but I installed the WindowsPhoneDeveloperResources_en-US_Patch1.msp first. Then the VS10-KB2486994-x86.exe. They install silently. In other words, you would need to check Programs and Features and look in Installed Updates to see if they installed successfully. Like the screenshot below: Once you get them installed you can try out a few new features. Like Copy and Paste. Just fire up your application and put a TextBox on it and Select the Text and you will have the option highlighted in red above the text. Once you select it you will have the option to paste it. (see red rectangle below). Another feature is the Windows Phone Capability Detection Tool – This tool detects the phone capabilities used by your application. This will prevent you from submitting an app to the marketplace that says it uses x feature but really does not. How do you use it? Well navigate out to either directory: %ProgramFiles%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect %ProgramFiles (x86)%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect and run the following command: CapabilityDetection.exe Rules.xml YOURWP7XAPFILEOUTPUTDIRECTORY So, in my example you will see my app only requires the ID_CAP_MICROPHONE. Let’s see what the WmAppManifest.xml says in our WP7 Project: Whoa! That’s a lot of extra stuff we don’t need. We can delete unused capabilities safely now. Some of the other fixes are: (Copied straight from Microsoft) Fixes a text selection bug in pivot and panorama controls. In applications that have pivot or panorama controls that contain text boxes, users can unintentionally change panes when trying to copy text. To prevent this problem, open your application, recompile it, and then resubmit it to the Windows Phone Marketplace. Windows Phone Connect Tool – Allows you to connect your phone to a PC when Zune® software is not running and debug applications that use media APIs. For more information, see How to: Use the Connect Tool. Updated Bing Maps Silverlight Control – Includes improvements to gesture performance when using Bing™ Maps Silverlight® Control. Windows Phone Developer Tools Fix allowing deployment of XAP files over 64 MB in size to physical phone devices for testing and debugging. That’s pretty much it. Thanks again for reading my blog!  Subscribe to my feed CodeProject

    Read the article

  • Block-level deduplicating filesystem

    - by James Haigh
    I'm looking for a deduplicating copy-on-write filesystem solution for general user data such as /home and backups of it. It should use online/inline/synchronous deduplication at the block-level using secure hashing (for negligible chance of collisions) such as SHA256 or TTH. Duplicate blocks need not even touch the disk. The idea is that I should be able to just copy /home/<user> to an external HDD with the same such filesystem to do a backup. Simple. No messing around with incremental backups where corruption to any of the snapshots will nearly always break all later snapshots, and no need to use a specific tool to delete or 'checkout' a snapshot. Everything should simply be done from the file browser without worry. Can you imagine how easy this would be? I'd never have to think twice about backing-up again! I don't mind a performance hit, reliability is the main concern. Although, with specific implementations of cp, mv and scp, and a file browser plugin, these operations would be very fast, especially when there is a lot of duplication as they would only need to transfer the absent blocks. Accidentally using conventional copy tools that do not integrate with the FS would merely take longer, waste some bandwidth when copying remotely and waste some CPU, as the duplicate data would be re-read, re-transferred and re-hashed (although nothing would be re-written), but would absolutely not corrupt anything. (Some filesharing software may also be able to benefit by integrating with the FS.) So what's the best way of doing this? I've looked at some options: lessfs - Looks unmaintained. Any good? [Opendedup/SDFS][3] - Java? Could I use this on Android?! What does [SDFS][4] stand for? [Btrfs][5] - Some patches floating around on mailing list archives, but no real support. [ZFS][6] - Hopefully they'll one day relicense under a true Free/Opensource GPL-compatible licence. Also, 2 years ago I had a go at an attempt in Python using Fuse at the file-level to be used over the top of a typical solid FS such as EXT4, but I found Fuse for Python underdocumented and didn't manage to implement all of the system calls. My first post here, so I can't post more than 2 links until I get over 10 rep: [3]: http://www.opendedup.org/ [4]: https://en.wikipedia.org/w/index.php?title=SDFS&action=edit&redlink=1 [5]: https://en.wikipedia.org/wiki/Btrfs#Features [6]: https://en.wikipedia.org/wiki/ZFS#Linux

    Read the article

  • Second Monitor stays black/in power save mode

    - by Rob
    I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1. The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode. When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them. On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally: xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal sleep 2 xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal This workaround stop working after the update to 13.04, and now i'm looking for a new solution. Has anyone experienced something similarity? xrandr output: Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192 DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 72.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G96 [GeForce 9500 GS] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nouveau latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff Thanks for your help!

    Read the article

  • Survey results: Open source developer preferences

    We recently conducted a survey of open source developers to learn about their current preferences around hosting sites and source control systems.  The survey was primarily advertised via Twitter, and we tried to avoid pushing the survey among audiences that would be specifically oriented towards a particular site (for example we did not advertise the survey from the CodePlex twitter account). In total there were just under 500 responses, so a reasonable sample size although not necessarily enough to guarantee fully representative results.  One of the survey questions was what is your preferred operating system for development, and looking at the results they are particularly interesting when split by operating system preference because of how significant the difference is:   Table 1 - Preferences by what is preferred operating system for development   As you can see, the preferences among developers which prefer Windows is very different from Linux and Mac oriented developers.  Again, the question was on what operating system they prefer to use for development, and didn’t ask what type of applications they create, so presumably many create things like websites which are cross-platform from a user perspective regardless of the operating system they prefer developing with. For hosting site preference, CodePlex and GitHub are roughly tied for first place among Windows developers and combined are preferred by over 75%.  However with Linux and Mac developers, GitHub has a runaway lead over the other sites.  Perhaps not particularly surprising, CodePlex has negligible mindshare among Linux and Mac developers.  It is somewhat surprising how low SourceForge and Google Code are given historically they used to rank much higher. Looking at version control preferences is also interesting.  Among Windows developers TFS, Mercurial, Subversion, and Git all have a sizable following.  While for Linux and Mac developers it is almost all Git and Mercurial, with Git having a substantial lead.  Git is generally considered to run better on Linux and have more of a Unix feel, so not really surprising to see it more popular there compared to Windows developers.  It is surprising how low Subversion has dropped since it was the dominant preference not long ago for open source developers.  Around a quarter of Windows developers still prefer Subversion, but Linux and Mac developers have largely abandoned it.  The trend towards distributed version control systems (e.g. Mercurial and Git) is strong, with over 50% of Windows developers now prefer DVCS, and over 80% of Linux and Mac developers.

    Read the article

  • COLLABORATE 13 Call for Papers

    - by Marc Weintraub
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Attention PeopleSoft customers!  Speak at the largest user-led PeopleSoft conference of the year and attend for free! Interested in submitting a presentation for COLLABORATE 13? October 12 is the deadline to submit your abstract. The COLLABORATE 13- Quest forum is your home for high-level education sessions around PeopleSoft. Presenting doesn’t just mean giving a solo lecture: you can present with a vendor, give a demonstration (internet will be provided), facilitate a hot topic discussion or even offer best practices from an experience your company has been through. Remember, to submit an abstract now, all you need is a short description of your presentation. Think you don't have a story to tell? Think again! Check out the COLLABORATE 13- Quest forum now to better understand what we are looking for. A selection committee of other PeopleSoft users will review all sessions and select the most relevant, customer-focused sessions possible to make COLLABORATE a great learning experience for everyone. Don't forget, one speaker from each session selected will be eligible to receive a complimentary registration to the entire event *some rules apply. Also, don’t forget to include your functional counterpart. The selection committee is looking to increase the amount of functional users attending and want to help them glean the most out of the event. Thank you for your time and please let the selection committee know if you have any questions about submitting a presentation. We look forward to seeing you at COLLABORATE 13 in Denver! Quest's COLLABORATE '13 website - http://www.questdirect.org/collaborate /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Multiplayer tile based movement synchronization

    - by Mars
    I have to synchronize the movement of multiple players over the Internet, and I'm trying to figure out the safest way to do that. The game is tile based, you can only move in 4 directions, and every move moves the sprite 32px (over time of course). Now, if I would simply send this move action to the server, which would broadcast it to all players, while the walk key is kept being pressed down, to keep walking, I have to take this next command, send it to the server, and to all clients, in time, or the movement won't be smooth anymore. I saw this in other games, and it can get ugly pretty quick, even without lag. So I'm wondering if this is even a viable option. This seems like a very good method for single player though, since it's easy, straight forward (, just take the next movement action in time and add it to a list), and you can easily add mouse movement (clicking on some tile), to add a path to a queue, that's walked along. The other thing that came to my mind was sending the information that someone started moving in some direction, and again once he stopped or changed the direction, together with the position, so that the sprite will appear at the correct position, or rather so that the position can be fixed if it's wrong. This should (hopefully) only make problems if someone really is lagging, in which case it's to be expected. For this to work out I'd need some kind of queue though, where incoming direction changes and stuff are saved, so the sprite knows where to go, after the current movement to the next tile is finished. This could actually work, but kinda sounds overcomplicated. Although it might be the only way to do this, without risk of stuttering. If a stop or direction change is received on the client side it's saved in a queue and the char keeps moving to the specified coordinates, before stopping or changing direction. If the new command comes in too late there'll be stuttering as well of course... I'm having a hard time deciding for a method, and I couldn't really find any examples for this yet. My main problem is keeping the tile movement smooth, which is why other topics regarding synchronization of pixel based movement aren't helping too much. What is the "standard" way to do this?

    Read the article

  • C# Dev - I've tried Lisps, but I don't get it.

    - by Jonathan Mitchem
    After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

    Read the article

< Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >