Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 480/626 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

• Format External HD on Airport Extreme Base Station?

  - by David.Chu.ca

  I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

  Read the article

• Currently well suited SATA2-SSDs for Laptop usage

  - by danilo

  I am looking for a solid state drive for my laptop. My dillemma: I have been waiting for the new Intel SSDs since Q3/2010, as I've heard they should be better and cheaper, due to lower memory manufacturing costs. Now it looks like the new Intel drives are very fast, but still expensive. I would still buy one of them if I could benefit from the full speed. My hardware only has a SATA-2 port though. Thus, my question: Is it worthwhile to buy one of those new Intel SSDs made for SATA-3 if I won't be able to use the full speed? Are there any other promising new SSDs that will be released soon? (Inside the next 1-2 months) If I wouldn't make a good deal buying the newer, faster drives, what drives can you recommend? I don't consider this question subjective, as I am mainly looking for answers concerning the SATA-2/SATA-3 conflict.

  Read the article

• Slow LAN transfer from 3rd party computer

  - by Chris

  Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

  Read the article

• How can I set up OpenVPN to accept more than 60 connections?

  - by Robin

  Greetings! We're using OpenVPN and today hit an unexpected connection limit of 60 - even though max-clients is set to the source code default 1024. Server log: Tue Dec 21 13:49:41 2010 MULTI: new incoming connection would exceed maximum number of clients (60) We're slowly adding new clients to the VPN and expect to hit 200 some time next year, if we can get it working. We're running the server on a Win2003 R2. OpenVPN 2.0.9 Server config as follows: local 192.168.10.211 port 1195 proto tcp dev tun dev-node OpenVPN_Vision ca vision_ca.crt cert vision_server.crt key vision_server.key # This file should be kept secret dh vision_dh1024.pem server 192.168.211.0 255.255.255.0 ifconfig-pool-persist vision_ipp.txt ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 ;client-to-client keepalive 10 120 comp-lzo ;max-clients 100 # Default in source code is 1024 persist-key persist-tun status openvpn-status-vision.log log vision.log verb 3 I would greatly appreciate any help or input on this one. Thanks! Best regards, Robin

  Read the article

• Troubleshooting USB Hub on Snow Leopard MacOSX

  - by calmcajun

  I just bought a Belkin F5U701-BLK 7-port USB Hub and when I plug it into my iMac it does not seem to recognize it. Do I need to reboot my machine or install a driver? If I have to install a driver where do I get it from? I tried going to Belkin's website to search for drivers and and support info for the hub but I could not find anything. Edit: The USB hub is powering the other devices but my iMac does not recognize both hard drives.

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• Hosting several domains on one server using IIS 7

  - by Øyvind Knobloch-Bråthen

  I have created several web sites inside IIS7 on my server. All of them use the same ip and port, but different host names. Currently I have set the host name to www.mydomain.com. Now my question is, how do I get my actual domains to target the different sites on my server. Second question. Can I set my host name to only mydomain.com to make sure that all requests to that domain is handeled by the same application? Primarily, I want both www.mydomain.com and mydomain.com to work when the user types the address in their browser.

  Read the article

• DHCPOFFER delay VLAN

  - by john883

  I have configured two VLANs [ 15 and 16 ] and a trunkport on a Cisco Catalyst 2960. The trunkport is connected to eth2 on a Linux server The server is configured to support VLAN's and the interfaces eth2.15 eth2.16 is configured with ip addresses on two different subnet. dhcp3-server is running on the same server and hands out IP-addresses to the VLANs. When connecting a client to a port that is configured in ex. VLAN 15 and requesting a IP-address, i experience a long delay before recieving a DHCPOFFER, around 30 seconds or so, the client needs to send a DHCPDISCOVER about five times but will always recieve a DHCPOFFER. Any suggestion why this delay is happening?

  Read the article

• Nginx + PHP FASTCGI FAILS - how to debug ?

  - by Niro

  I have a server on AMAZON EC2 running Nginx +PHP with PHP FASTCGI via port 9000. The server runs fine for a few minutes and after a while (several thousands of hits in this case) FastCGI Dies and Nginx returns 502 Error. Nginx log shows 2010/01/12 16:49:24 [error] 1093#0: *9965 connect() failed (111: Connection refused) while connecting to upstream, client: 79.180.27.241, server: localhost, request: "GET /data.php?data=7781 HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "site1.mysite.com", referrer: "http://www.othersite.com/subc.asp?t=10" How can I debug what is causing FastCGI to die?

  Read the article

• postfix, webmin installed. whats next?

  - by Johnny Craig

  Im trying to get imap running and dont know the problem. i a developer, not a network guy.( our network guy left) we had postfix installed already for outgoing mail on 8 domains. we only had incoming on 1 domain. but that mail server is located on a different ip. now we want incoming on another domain, but we dont want it on another ip, we want it on the same ip as the website itself. I installed dovecot today because my hosting company said i needed it. it seems to run fine. do i need dovecot AND postfix? or are they the same thing? dovecot does not show up anywhere in webmin what i cant seem to figure out how to do is add a user email so i can try to telnet in on port 143. i think i have evrything installed, just need the next step.... sorry for the newb question

  Read the article

• FTP error when doing file transfer

  - by Ernie

  I'm running vsftpd version 3.0.2 over FTPeS, and I'm having a bit of trouble with file transfers. It seems to work fine when I'm on the LAN, but not from an external IP address. I have the control port and data ports open on my server's software firewall and my router's firewall. When I'm using the service from an external IP address, it seems like sometimes a file transfer will complete, but it times out and I always get the client error: "426 Failure writing network stream". I've tried several clients. I'm thinking there is some sort of data sabotage either at the router or some server policy; maybe because I'm using passive ftp? Suggestions?

  Read the article

• Windows 7 Line In Delay Issue

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• What cable to connect Inspiron 1720 to HDMI TV?

  - by Bernhard Hofmann

  Hi I'm a little confused to say the least when it comes to video formats and protocols. I'd like to view my laptop output on my HD TV. The TV has HDMI, S-Video, and RCA inputs. My laptop has a VGA female port on the side for driving a 2nd monitor, and an S-VHS output at the back. No, it has no DVI, which I've heard is a poor decision from DELL, and even poorer decision on my part to buy it. Can I get true HD output from this to my TV? What cable do I need, or would I need a converter? Any other suggestions are also welcome, such as how to get something close to HD on my TV. Thanks! Bernhard

  Read the article

• rdesktop + seamlessrdp + virtualbox slow on Windows

  - by Claudiu

  I'm trying to get VirtualBox seamless mode to work on all of my monitors at once. I was directed to this link, so I followed the instructions, using the windows port of rdesktop 1.6 found here, and using Xming as an X server. I eventually finally got it to work! However, it's really slow. While VirtualBox's regular seamless mode is as performant as if I was running apps on my host machine, with rdesktop it takes 1-2 seconds to register any user input. Dragging windows around is laggy and buggy (pieces of the desktop behind the window show through). I'm simply connecting to localhost, so network bandwidth/latency shouldn't be an issue... anyone have any idea why it's so slow and what I can do to make it more performant?

  Read the article

• What you'd need to setup BBS?

  - by raspi

  What I need to setup BBS nowadays? I'm thinking of BBBS or PCBoard (no telnet! too new technology). What I've thinked so far, I'd need: virtual machine which runs DOS and hook that virtual COM-port to somekind of virtual VoIP modem software somehow (is there any?). How you can call to it across internet? Can you use HyperTerminal straight with that virtual/real modem? Or will VoIP just garble the modem data and nothing will work?

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• block access to wrt from vlan using iptables dd-wrt

  - by NitroxDM

  I set up multiple isolated vlans in dd-wrt. Now I need to forward a port to vlan2. I isolated the vlans using: iptables -I FORWARD -i br0 -o vlan2 -j DROP iptables -I FORWARD -i br0 -o vlan3 -j DROP iptables -I FORWARD -i br0 -o vlan4 -j DROP Now I need to block a clients on each vlan from accessing the router. This doesn't work: iptables -I INPUT -i br0 -o vlan2 --dport telnet -j REJECT --reject-with tcp-reset I'm new it iptables... am I missing something?

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• What's wrong with my MAC address?

  - by Shaul

  I have a D-Link DSL-2650U router, and exactly one computer on the network. For reasons of port forwarding I want to give my computer a static internal IP address, so that I don't take the chance of losing my NAT settings every time the computer reboots. So here's a screen shot that summarizes the entire problem: WTH is wrong with my MAC address? It's copied and pasted from the command prompt window! I tried editing out the dashes, but it still doesn't work. Am I doing something wrong, or is there a bug in the D-Link firmware?

  Read the article

• Jetty8 virtual hosts

  - by Martin

  I have a server JAR that is deployed once per customer, it is the API server for their software package. To that end, the port for each API instance must be the same, so that anything programmed against it can always find it. Each instance is deployed on a different domain name The problem I'm having is that, even when using a SelectChannelConnector and setting the host property, I can't get two instances to run simultaneously, I get a BindException with "Address already in use". I suppose my question is: can Jetty do this, or do I need to do some external re-writing, or is there a better way I can go about achieving the same ends? Thanks.

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• Dovecot, POP3 and Gmail

  - by Eric J.

  I setup Postfix and Dovecot on a new Ubuntu box following these directions. From a client machine, I validate that POP3 seems to be working telnet mydomain.com 110 +OK Dovecot ready. USER [email protected] +OK PASS mypassword +OK Logged in. quit +OK Logging out. However, when trying to configure Gmail on the same client to retrieve email via POP3, I get the error Server denied POP3 access for the given username and password. Server returned error: "Login failed." I carefully confirmed that Gmail is configured to use the same POP Server, Port, Username and Password I used when checking the connection with telnet. What could be causing Gmail to get a "Login failed" message?

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

• How can i access windows XP remote desktop on private IP from internet?

  - by Jennie

  So the machine is behind a DSL router on a private IP so that it can not receive inbound requests. I want to know: Is there anyway to setup the router NAT (i highly doubt it supports one to one port mapping) without disturbing other users on the same router. I have another machine on internet which has public IP on it without any firewall. Can i use this machine as a relay server so that to initiate the connection, the XP machine send an outbound request and this relay server makes my connection through and then i can access my machine on pvt ip without any problem. Please tell??

  Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >