Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 484/626 | < Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >

• Is HDCP working for ATI/AMD cards on windows 8?

  - by Joel Barsotti

  I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

  Read the article

• Meaning of Bridge-Check in iptables flowchart

  - by networkIT

  In the famous iptables flow-chart what does bridge-check exactly stands for ? I couldn't find any documentation. The only clue I found was while scanning the MikroTik RouterOS documentation ( RouterOS is build upon a Linux 2.6.16 kernel ), I found this : In-interface Bridge = Checks if the input interface is a port for a bridge or is the bridge. Manual:Packet Flow Comparing both flow-charts brings clues that iptables Bridge-check might equal MikroTik In-Interface Bridge. Is this true ? Else, what might be the meaning of iptables Bridge-Check ?

  Read the article

• IIS not listening over external network, all other traffic working

  - by Beuy

  Hello there, I have a very odd situation, I have a server (let's call it X) running 2008 R2 with two NIC's in it, one is connected to the work domain and has a subnet of 192.168.10.0/24 the other is connected to a ADSL connection and has a subnet of 192.168.1.0/24. The server has IIS installed. On the ADSL connection I have setup a dynamic dns and port forwarding to allow external HTTP, HTTPS, FTP and RDP connections. FTP and RDP are working fine however neither HTTP or HTTPS are working at all. I can browse the websites by going to localhost on the machine, the HTTP and HTTPS ports appear as "Filtered" when I try to scan them using PortQueryUI and browsers respond with a "Server took too long to load or was not responding" error. This was working fine just a few days ago, Windows firewall is disabled I don't have any software firewall on it. And I'm really lost. Any help would be great.

  Read the article

• Cannot SSH into Amazon EC2 instance

  - by edelwater

  I read: Cannot connect to ec2 instance http://stackoverflow.com/questions/5635640/cannot-ssh-into-amazon-ec2-instance Amazon EC2 instance ssh problems etc... But could not fix it: suddenly (after a year of service, no changes on my winscp settings) it gives me "network error connection timed out" (im using ec2-user) (also from the amazon console). Log FILE: http://pastebin.com/vNq6YQvN All Sites that run on it run fine port 22 is allowed (never changed it) (security group) using the correct ec2-user and domain via my winscp / putty i can connect to other hosting (via ssh) update: SOLVED. I spend 2 days without looking at my own IP address .... (since it did not change the past 3 years....). Your comments made the spark in my brain. thank you so much. (and only now i find dozens of discussions from angry users that the static addresses from my provider are changed to dynamic ones: http://gathering.tweakers.net/forum/list_messages/1501005/12 ...)

  Read the article

• how to change the default open-with program to a program on the second disk

  - by Scott????

  I have a 250GB HDD for my system and a 60GB SSD using a SATA port. I installed most of my applications on the SSD. There's a strange thing though. I can not change the default open-with program to a program which is on the SSD. I think it may be caused by permission so I gave my user a 'full control' permission on the security tab in disk properties. But changing permissions is not work. After I choose an application (I've tried Notepad++, Sublime, 7Zip, etc.), nothing is added in the below window: Also, if I install 7Zip on my machine, the right click menu items can not be added.

  Read the article

• Recommended SMTP Relay Service [closed]

  - by Ryan

  I've got a legacy application that needs an smtp server to relay emails. Each client has various control over their IT infrastructures (from little to none at all), so I can't necessarily install an smtp server on each of their machines. Can anyone recommend a basic SMTP Relay Service? Its literally only for sending a couple of emails a day to a list of about 20 users per client. The application only allows for the smtp server and to/from addresses to be specified. I'm assuming its using the default port. Thanks!

  Read the article

• Configuring IIS site to use HTTPS

  - by James

  I am working on a REST API which I have currently deployed on a Win XP Professional SP2 development machine running IIS 5.1. The site is currently being hosted on port 81 and being accessed via HTTP. I would now like to configure the site to stop using HTTP and use HTTPS only. I have developed a self-signed certificate using the SelfSSL.exe tool from the 6.0 Resource Kit Tools and set the Common Name to be the IP of my server (as it's a local development machine it has no domain name). I have also already configured the site to use SSL using the How To Set Up an HTTPS Service in IIS tutorial as my guide. However, whenever I try to access a resource in the API via HTTPS I get a 404. Any ideas?

  Read the article

• Finding a private (NAT) host's IP using historic destination data

  - by l0c0b0x

  The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

  Read the article

• Virtual Network Printer

  - by user113720

  I'm pretty new to Microsoft Servers so don't blame me if the question isn't that smart [I'm a Unix guy]. I need to install a Virtual Printer of a Microsoft Server 2008 r2. The requirements are: The printer must print on a file {whatever file... txt or pdf } The printer must run on a server The printer must accept plaintext from a specific IP:port The connection between the device that prints and the server is a local network I've tried to install a virtual printer, but I cannot specify the constraint about the socket from which receive data to print. Thank you so much

  Read the article

• USB keyboard not working under Windows 7 x64?

  - by Comboo

  I have two USB keyboards, one no-name cheap thing and an old Logitech. When I plug them in to my computer they pop up in Device Manager as an "Unknown device" and "USB-receiver", respectively. Both of them fail to install any drivers, neither automatically or through Windows Update. Both keyboards work perfectly on another computer I have with Windows Vista 32-bit. Can this be one of those cases where a device does not work in a 64-bit version of Windows? I doubt it though since I've never had that problem before with any device and I thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing the USB port, etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over USB? There is nothing written on it.

  Read the article

• HP Media Smart remote access

  - by Coov

  I just purchased this box for home backups for my pc's and mac's. Everything works great accept for the remote access part. I can RD into the machine locally but I can't get to it from outside of my network. I've enabled port forwarding on my router but it doesn't seem to matter. I checked with Qwest and they don't block these ports so I'm at a loss. I do have Vonage in front of my router but I've taken it out and it didn't make a difference. I suspect I've made an error with my router setup. I'm a programmer and I'm playing in the world of the unknown here. I'm lost. Any suggestions?

  Read the article

• netsh advfirewall firewall

  - by lehn0058

  I am trying to write a script to configure a windows firewall (server 2008 & 2012 only) to adjust certain firewall settings after a machine has been added to a domain. I need to do this because one of the pre-installed programs on these machines we get only has the firewall rules setup for the public and private firewall profile. This script will be pushed out for other admins to use, and some of the machine will be in other languages. The command to change an existing firewall rule is as follows: netsh advfirewall firewall set rule name = "rule name goes here" new profile=domain This command works great. However, I need to do this for about 10 firewall ports AND since the program could be installed on computers with different languages, I can not just pass the name of all of the firewall rules. Is their some way to do this by supplying the port number? Or some way to specify a regular expression so I could use any rule that has a name LIKE 'test'?

  Read the article

• Anything to share a printer from 32-bit to 64-bit Windows?

  - by marklam

  I've got a printer which only has 32-bit drivers, so it's installed on a 32-bit machine (XP). I need it to appear as a printer (with duplex control etc) on a 64-bit machine (Vista). I can't just share it using Windows printer sharing because the 64-bit client requires drivers to connect to it. There's no 64-bit driver for a similar printer that works (using the new port named \\server\printername). I've tried the ghostscript approach but that doesn't seem to help with the duplex control etc. Printeranywhere doesn't support 64-bit OS yet. Is there another way to do this?

  Read the article

• Can't display at full resolution on an external monitor from my MacBook.

  - by Ramblingwood

  I have a 24" Asus V246H and a new MacBook ($999 one). I am trying to display to display to my Asus at 1080p via VGA. So I boot up with the lid closed and the external monitor plugged in. Everything boots up fine, but the resolution is really low. So I go in and change the resolution to be 1920x1080. My monitor then has a blue box on it that says "OUT OF RANGE". Lower resolutions like 1024x768 work, but 1680x1050 doesn't. If I try mirroring my displays, the entire external monitor AND the entire laptop screen is completely garbled. I can make out some colors, but it is completely unusable. I am suspecting that it simply won't work via VGA, but I don't want to buy another adapter, and my PC is using the DVI port. Any solutions?

  Read the article

• Using Arch Linux computer as a server for Rack Apps

  - by wxl

  What would be the best way to go about using an Arch Linux computer as a Rack (as in Ruby Rack, not an actual rack server) server? Here's what I want to be able to do: Automatically deploy on a git push to the server. (I already have this worked out, on post-receive the server checks out the app to /home/git/app from /home/git/app.git.) Run a Rack server application to serve up this app, one that can be restarted on demand. Run a MongoDB server Be able to access the app by going to my-server.local/app or something similar. (It's really only going to be used on the local network, no port forwarding or outside use) Any ideas would be greatly appreciated. I apologize if this seems too "do it for me".

  Read the article

• Cannot connect to IIS 7 from localhost

  - by Wout

  I cannot connect to the local IIS 7 using "http://localhost" in IE. "http://127.0.0.1" doesn't work either. The strange thing is that if I add a binding on e.g. port 81, then I can reach "http://localhost:81". Also turning off the firewall on the local machine doesn't help. The site is reachable from the internet. The local requests don't seem to hit IIS (no entries in the IIS log files). IIS is hosted on Windows Server 2008 R2 from behind a hardware firewall device. Note that I'm a programmer, not a network administrator, so I'm having a hard time trouble shooting this.

  Read the article

• I would like to have a publicly accessable linux box hosted elsewhere. Who provides this service?

  - by Eric Wilson

  I would like to have a general purpose linux server available and publicly accessible. I understand that there are no lack of web-hosting companies, but I might want more control over the machine than is typical. I would want the ability to install software, such as an SVN server, and I would like to be able to expose various port numbers, as I may have a variety of extremely low traffic sites that I would want to have available. Obviously, one option is to host such a machine in my home. Is that my only option? Or is what I describe out there, possible as a virtual machine on a larger server?

  Read the article

• 3 Monitors, 1 graphics card

  - by mikelbring

  I have a Nvidia GT 120 graphics card. It has a VGA, DVI and DMI output. Can I have 3 monitors with this? One for each port. Also if not, can I use DVI and HDMI and have 2 monitors. I know I can do 2 with the VGA and DVI but I am wondering about DVI and HDMI. Also my last question is, if I can have 2 monitors with the DVI and HDMI, can I use a HDMI to DVI cable and still have the same success?

  Read the article

• Move the ESXi service console from eth0 to eth1.123

  - by Mircea Vutcovici

  I have an VMware ESXi 4.0.0 with 2 physical network cards. First one, eth0, has only the Service Console and the other one, eth1, is a trunk with all VLANs (including the management VLAN used by the Service Console). I would like to free eth0 port to be able to connect a network storage and I would like to move the management IP from eth0 to eth1/VLAN123. Can I do this remotely? Is it possible from vSphere client? Should I do it from the ESXi console?

  Read the article

• Options for connecting an external disk to an old laptop

  - by agnul

  I've tried connecting a 2.5" external drive to an old laptop which has only USB 1. The LED on the disk lights up, but the disk doesn't seem to spin up. Since the same disk works fine on a newer laptop my guess is that the old one doesn't output enough power on the USB port. Besides looking for an external drive with its own PSU, what would you suggest? Will one of those USB cables with two connectors work? What about a powered USB hub?

  Read the article

• so i installed sql server now how do i connect to it?

  - by letseatlunch

  SO i have a server running windows server 2008 r2 and i just installed Microsoft sql server 2008. I used the manager thing to create the database and the tables, etc and now i want to connect to it via my visual studio which is on a different machine. so how do i do that? do i need to "turn on" the sql server, do i need to do port forwarding? do i have to modify the iis or change those settings? is there a good article someone can me point me to? just to further help you help me, i understand how to connect to a datasource in visual studio my problem is more with the sql server and understanding how to properly set it up once installed. Sorry for the noob question, i got it all installed and i know how to use it once its all going i just don't know the in-between. thanks in advance dave

  Read the article

• FastCgiModule Error 500 on Windows7 Ultimate + IIS 7.5

  - by user63179

  I'm running IIS 7.5 on Windows 7 Ultimate. I've installed PHP Version 5.2.14 using Microsoft Web Platform Installer. I've created a virtual directory and a file with which I can browse it and it returns all the PHP information just fine. I'm trying to install MantisBT, and when I copy all the file to my virtual directory and browse index.php I receive the following error detail: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP_via_FastCGI Error Code 0x00000000 Requested URL http://localhost:80/mantisbt/index.php Physical Path V:\wwwroot\mantisbt\index.php Logon Method Anonymous Logon User Anonymous I've changed these in the php.ini file: fastcgi.impersonate = 1 fastcgi.logging = 0 cgi.fix_pathinfo=1 cgi.force_redirect = 0 The Handler Mappings have this information: Request path: *.php Module: FastCgiModule Executable: C:[Path to PHP installation]\php-cgi.exe Name: PHP_via_FastCGI Thank you for any advice on this!!

  Read the article

• Scrolling mouse sets windows sound volume

  - by Ikke

  Suddenly, when I use the scroll wheel of my mouse, it changes the windows sound volume level. I have a HP DV6-2030SD laptop with Windows 7 64 bit and a Zolid p50622 mouse. When I use the scroll function of the mouse pad of the laptop, it does not adjust the sound level. I don't have any special mouse drivers installed, just the standard windows drivers. When I scroll, I see the HP sound level screen: It doesn't do it always, but when it does, it prevents the current window to scroll, which is really annoying. Rebooting doesn't help. I've tried to put the USB dongle in a different port, but this doesn't help either. Any advise on how I can fix this?

  Read the article

• How to script printer creation on a Windows Server 2008 R2 clustered print server?

  - by Massimo

  As per subject. I've found some ways of scripting printer creation on Windows print servers using WMI, but it looks like WMI doesn't support clustered print servers (or clustered servers at all). The scripts in C:\Windows\System32\Printing_Admin_Scripts are useless because, they are not cluster-aware and end up creating the printers on the active cluster node (just like using WMI). The only tool I found that was able to work on a clustered print server is printui.exe (shortcut for rundll32 printui.dll, PrintUIEntry), but it can't create TCP printing ports: it can only add printers if the port already exists. How can I completely script printer creation (including TCP printing ports!) on a clustered Windows Server 2008 R2 print server?

  Read the article

• HDMI connection does not support HDCP

  - by mroggi

  Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

  Read the article

< Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >