Search Results

Search found 55281 results on 2212 pages for 'j set'.

Page 496/2212 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

• Make Google chrome with specific user profile as default browser

  - by Kaushik Gopal

  Is it possible to set Google chrome with a custom user profile as the default browser? When I set google chrome as the default browser, it picks the "default" user profile as against the custom one I have setup. I tried setting google chrome as default browser after opening it from that particular user profile, but it doesn't seem to have an effect. I googled around but could only find another poor soul like myself who asked a similar question here: http://www.google.com/support/forum/p/Chrome/thread?tid=69f0a6e776ceab1c&hl=en There weren't any responses to that question. Cheers.

  Read the article

• What things should I run daily, weekly, monthly on my Windows machine?

  - by Jitendra vyas

  What things should I run daily, weekly, monthly on my Windows XP machine? De fragmentation Scan-disk Full system scan Disk clean up Trojan checker malware remover or any other thing... And should I run all these things in Safe-mode always? I want to perform all mentioned things automatically at night. How to set schedule and What would be the best plan? For daily weekly and monthly? I've 300 GB SATA HDD with 6 partition. I would like to know in above mentioned list: Which process should I run daily? Which process should I run weekly? Which process should I run on monthly basis How to set schedule for all in Windows task scheduler?

  Read the article

• I am unable to find login page for phpmyadmin

  - by Awan

  I was using phpmyadmin(in Wamp) without a password for root. I thought to set a password for root and goto Privileges page and set a password for root. Now whenever I go to localhost/phpmyadmin page it gives me the following error. MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. I don't know that what is the problem. It is not showing me a login type page to enter a username and password. Any idea that what is the problem ? Thanks

  Read the article

• How to access apache behind home router?

  - by Filip

  Hi! I have public IP 89.103.xxx.yyy, then router and home network with 192.168.1.zz My router is set to portforward every 8056 on ip adress 192.168.1.5 (my PC), where apache is running. Apache listen is set to: Listen 127.0.0.1:80 Listen 192.168.1.5:8056 When i try: Listen 89.103.xxx.yyy:8056 I get message "unexpected end of apache" (I'm using easyphp for windows). Added: When i try to access 89.103.xxx.yyy via browser, it's prompting router request for authorization to access router web-settings. And when i try 89.103.xxx.yyy:8056, browser says that connection timed out =(

  Read the article

• How to Automate .inf PnP Windows 7 Drivers with Wildcard?

  - by Dos_Probie

  I am trying to automate the PnP driver installs for Windows 7 with either of the below batch files via For loop and wildcard for the .inf file. The rundll32 batch reads and echos the correct .inf file but then gives me the "Error Installation failed" and with the pnputil batch it runs without any error put does not install. How can I correct the batch files to install the inf correctly? @echo off&color a&setlocal enabledelayedexpansion cd %~dp0 set PnP=rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 .\*.inf for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ::or set PnP=pnputil -i -a "*.inf" for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ping -n 3 localhost 1>nul start "" /wait %PnP%\%%a ) cls echo. * DONE * pause exit

  Read the article

• Unable to modify variables phpmyadmin via variables tab (Xampp)

  - by rookie coder

  I am quite new to phpmyadmin configuration. I had project where utf8 encoding is needed. What i'm trying to do is to change the variables text/char all into utf8. I changed, yes at that moment the values changed into values I wanted. But then when I terminate Xampp and reenters phpmyadmin page or even refreshing the page, all the values restored to default (original values). My phpmyadmin had default user as root and hadn't been set a password yet. There is also no logout button in phpmyadmin landing page. I had difficult time even to set the server connection collation (hangs indefinitely and never seems can be updated). phpmyadmin version:4.1.6 mysql:5.5.36 (latest version) I doubt this could be due to malformed installation, because same things happened in my other computer too (exactly the same versions). what could be wrong? thanks.

  Read the article

• Using themes in visio

  - by JohnW

  I'm looking for a good reference on how to properly use themes in Visio. Here's been my experience so far: Create a flowchart diagram - nothing fancy, just all black & white. No formatting applied to any object. Select & apply a theme to the diagram. Despite the theme showing a set of matching colors, the diagram now has a single color applied to all objects. Right-click the object, format, fill, and pick a color from the set of matching theme colors. End up with an amalgamation of the original theme color I picked (blue) and the new color (green). With enough 'playing' with the object, I can get it to look OK, but it feels like I'm missing something, that it shouldn't be this hard to get a matching color. Any advice would be appreciated. :)

  Read the article

• Excel scatter chart with multiple date ranges

  - by Abiel

  I have multiple blocks of time series data on an Excel sheet, with each block having its own set of dates. For example, I might have dates in column A, values in column B, and then dates in column D and values in column E. The values in B go with the dates in A, and the values in E go with the dates in D. The dates in A and D may not be the same. I would like to create a scatter chart with a time category axis that is the union of my two input date ranges in columns A and D. If I select all the data and then go insert chart (in Excel 2010), Excel treats only column A as the X axis, and looks at D as just another set of values. I can get Excel to do what I want by first just charting columns A and B, then selecting D and E and copy-pasting onto the chart. However, I would like to avoid this two-step procedure if possible.

  Read the article

• Samsung printer (ML-1640) margin problem

  - by Rytis

  I just got a new laser printer, Samsung ML-1640, and it has once again confirmed my experience that Samsung printers suck badly. The printer prints fine, except that the top margin is set at random, usually very small, cutting text on the top of page off. I tried updating firmware, getting new drivers, but nothing helped. I tried changing paper types, and it seemed that with the paper set as "plain" it was OK, but I just tried printing again after letting the printer rest for the night, and wasted 6 pages until I managed to print 2 boarding passes... Is there anything else I could try to resolve the issue?

  Read the article

• ReadyNAS issue with Google Apps?

  - by Jauder Ho

  The power went out (again) in my house today so I decided to set up some alerting. Since I have a ReadyNAS and the latest version of Raidinator seems to have SMTP TLS support, I figured I would try setting things up to email to a domain I have hosted on Google Apps. At this point, I have everything working IF I use a Gmail account but as soon as I switch to a Google Apps email address, it stops working and complains with smtpstatus=535 smtpmsg='535-5.7.1 Username and Password not accepted. Learn more at \n535 5.7.1 http://mail.google.com/support/bin/answer.py?answer=14257 30sm16076226wfd.23' errormsg='authentication failed (GNU SASL, method PLAIN)' exitcode=EX_NOPERM I'm wondering if anyone else has encountered this. Google's extremely aggressive captcha does not help but I am able to log in now without a captcha from a browser so I'm open to any ideas why the simple switch of a user/password combo that is supposed to work does not. I'm also attaching my config so that others can see how to set things up.

  Read the article

• Ignoring GET parameters in Varnish VCL

  - by JamesHarrison

  Okay: I've got a site set up which has some APIs we expose to developers, which are in the format /api/item.xml?type_ids=34,35,37&region_ids=1000002,1000003&key=SOMERANDOMALPHANUM In this URI, type_ids is always set, region_ids and key are optional. The important thing to note is that the key variable does not affect the content of the response. It is used for internal tracking of requests so we can identify people who make slow or otherwise unwanted requests. In Varnish, we have a VCL like this: if (req.http.host ~ "the-site-in-question.com") { if (req.url ~ "^/api/.+\.xml") { unset req.http.cookie; } } We just strip cookies out and let the backend do the rest as far as times are concerned (this is a hackaround since Rails/authlogic sends session cookies with API responses). At present though, any distinct developers are basically hitting different caches since &key=SOMEALPHANUM is considered as part of the Varnish hash for storage. This is obviously not a great solution and I'm trying to work out how to tell Varnish to ignore that part of the URI.

  Read the article

• Configuring HAProxy with memcache with failover

  - by Lawrie Matthews

  I'm configuring a new set of servers for an existing Wordpress site, and it's been requested that memcache be available and made more resilient. The idea proposed is to have HAProxy send requests to one of the two servers; if that memcache instance is inaccessible, then it should switch to the second, but should not switch back to the first if it comes back up unless the second is then unavailable. This doesn't appear to be a particularly common use case and I've not found much along these lines except to possibly set up the first node with an enormous rise value, such as: server server1 10.112.58.16:11211 check inter 5s fall 3 rise 99999999 server server2 10.112.58.19:11211 check backup which falls over as expected when server1 is unavailable. It won't ever fall back to server1, though, even if server2 goes offline. Can this be made to work?

  Read the article

• Windows 2012 Server Hyper-V: Cannot see LAN

  - by Samuel

  I have one NIC on the machine loaded XP on the Hyper-V and had chosen the network as virtual switch. No LAN and no internet shows up on the client. Am I missing something? it used to work in 2008-R2. Details: One network card on machine (Qualcomm Atheros AR8131 PIC-E Gigabit Ethernet controller) The virtual machine hard disk is pointing to and existing XP-SP2 hard disk created using VPC 2007 The Virtual machine Network Adapter is setup as Virtual Switch to the real ethernet controller with Enable virtual LAN identification set to 2 (no other virtual machine is created in the system) After the virtual machine boots LAN shows empty in Control Panel Network Connections (this is XP client) and I also cannot access the internet. XP is showing activation prompt but as far as I know it should not disable the network! Virtual network switch is set to External

  Read the article

• International Dvorak keyboard doesn't trigger hot-keys

  - by akurtser

  Hi, I just configured a Hebrew-Dvorak keyboard with Keyboard Layout Manager. What this means is that when I hold Shift+any key, the input is the capital English letter. It works just fine, however, hot-keys that involves the Ctrl key aren't being triggered when the input language is set to Hebrew (i.e Ctrl+L in FF which should set the focus on the URL bar) If however I hit the matching Qwerty key (input lang=Hebrew) I get the desirable result (i.e the URL bar get focused). The only thing I can think of is completely removing the US-Qwerty layout, but I don't know how this can be achieved, and besides, it may not solve the problem. Thanks, Almog.

  Read the article

• Terminal services and memory limits

  - by Mark Wassell

  Is there a way in Terminal Services to set limits on memory related parameters for a process. For example working set size and, possibly, if it makes sense, total virtual memory allocation for the session? To turn the question around, we have an application which cannot allocate as much virtual memory running on a terminal server as it can when running on a desktop PC (both I would expect to have a limit of 2GB for user mode address space) and I was wondering if there is another limit for processes or users on a terminal server. Perhaps even 2GB per user rather than per process.

  Read the article

• TextMate suddenly highlighting all text dark red...?

  - by AP257

  I'm using TextMate on Snow Leopard, don't know much about how it works. After I hit an unknown keyboard shortcut, it suddenly decided to highlight almost all text in my Python files dark red - making all my Python virtually unreadable! I must have accidentally pressed a shortcut - but I've no idea what I did or how to turn it off, and can't find any relevant help in the manual or form. Even just 'turn off all highlighting' would do. Anyone know how to turn this highlighting off? Bit desperate! UPDATE: Figured it out. There's a tiny, tiny dropdown list at the very bottom of every TextMate editing window where you can set the language, so TextMate can highlight invalid syntax - I'd accidentally clicked on it and set the language to something other than Python. Will leave the question up though in case others have the same problem.

  Read the article

• Adium now playing from MPD

  - by Jeffrey Aylesworth

  Is there a plugin that would set my status to my now playing in MPD?

  Read the article

• Windows AD, bulk user creation, homedrv creation via commandline

  - by Neil

  I am Bulk creating AD users from the commandline (dsadd) and whilst doing so am setting the homedir and homedrv to a DFS location. I observe when I create the user with all these settings via the GUI (dsa.msc) that the homedrv gets created on the DFS share with all the permissions set correctly. But when using dsadd, the folder is not created. How can I replicate this GUI behaviour via the commandline when creating the user? I don't really want to rely on logon scripts to set it up. Do I have to use mkdir and cacls and something else to give the user Ownership? Or maybe I am missing something easy. Any help much appreciated!

  Read the article

• Configuring a Genius GW-7200 Access Point

  - by alex

  I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

  Read the article

• Spoofing domains - using one domain to look at another without frame redirect

  - by hfidgen

  Hiya, In Plesk 9.2.2 does anyone know how the following can be achieved? I've got domain1.co.uk registered in plesk, but the domain has not been set up with any nameservers or A records, so it is unreachable from the web. However, I need to test it while we get the domain1.co.uk nameservers etc sorted over the next week or so. SO, i've got sparedomain.co.uk registered, with the nameservers and A records pointing to the server, and sure enough it displays the default plesk "theres no website here yet page" . bingo. Now, how can I set up sparedomain.co.uk on my plesk server, so it displays all the data held on the plesk account for domain1.co.uk? Frame forwarding doesnt work - because you get errors saying "domain1.co.uk cannot be found" in your browser - i need a server solution to spoof it all. Anyone got any ideas? Thanks!

  Read the article

• pxelinux hanging when booting client machine

  - by Blasphemophagher

  I'm kind of new to all of this, so please forgive any vagueness/misunderstandings on my part. I'm using pxelinux and VMs to create CentOS 6.0 machines that have the same install every time. I have a new VM set to boot from network, but in the process of booting up it gets stuck at "Loading 10.1.1.20:/pxelinux.0" (10.1.1.20 is the address of the server it's getting info from). pxelinux conf: http://pastebin.com/4XfZZPY1 I'm pretty sure all my config files are correct, could it be VirtualBox related? I have both the building server and the new client set to Host-only adapter and PCNET-FAST.

  Read the article

• cassandra node discovery

  - by eQuiNoX__

  I just set up a 3 node system with ip addresses "192.168.0.101", "192.168.0.102", "192.168.0.103". I have set the seeds value on the configuration of all three machines as seeds: "192.168.0.101,192.168.0.102,192.168.0.103" However, on running nodetool on any of them, only the 103 machine gets discovered. node101:/opt/cassandra/apache-cassandra-0.8.5/bin# ./nodetool ring -h 192.168.0.101 Address DC Rack Status State Load Owns Token 192.168.0.103 datacenter1 rack1 Up Normal 151.96 KB 100.00% 38174485210079977599903748344879358256 Could someone tell me where the problem lies?

  Read the article

• Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

  - by itchy355

  I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

  Read the article

• Windows Scheduled Tasks losing password configuration

  - by E Brown

  I have a couple of jobs scheduled to run daily on a customer server running Windows Server 2003 Standard Edition, SP1 using Windows Scheduled Tasks. The tasks are set to run as a user that is in the Administrators group, and were scheduled as that same user. The password of that user is set to never expire. These tasks fail to run pretty much every day. Going into Scheduled Tasks and attempting to run the tasks manually indicates that the password is incorrect. I go into the task properties, retype the password into the appropriate fields, click OK, and attempt to run the task manually again. Now it works fine. What might be the cause of the password being lost like this? These same tasks are running on other customers servers with no problems. Thanks in advance for any thoughts.

  Read the article

• Asterisk, IAXModem & Hylafax how-tos?

  - by Brian Postow

  I'm trying to set up Asterisk and IAXModem to send faxes via T38 (Yes, I know I'm swatting a fly with a Buick...) However, since I'm trying to do something so small with a product so large, I'm having trouble finding samples or how-tos that show me how to set this up. I've got all three installed, and I THINK I have my IAXModem config correct. I'm pretty sure that I have Hylafax correct (I've used it with T38Modem) so, I need to know which of the Asterisk samples I need to use, and how to use them. I think I want to use some combination of iax.conf, iaxprov.conf, sip.conf and sip_notify.conf. But I'm not sure where to put them, or what to change... I'm sure that the answer is RTFM, but I'm not sure WHICH M, or where in it to R... thanks.

  Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >