Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 505/792 | < Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >

• Use all 5.1 speakers with a 2.1 audio source

  - by thegreyspot

  Hi! I just bought a 5.1 surround sound speaker set for my computer in my bedroom. The rear speakers are next to me in bed while the front speakers are at the other end of the bed at my feet. While I enjoy the surround sound during movies that support 5.1 sound, I would like to have my rear speakers working when listening to podcasts, or other 2.1 channel sound. How can I do this? When I enable "Speaker Fill" in the Realtek Hd Audio manager the sound only comes out of the front and center speakers with a few background noises that come out the rear ones. But since my ears are closer to the rear speakers, I'd rather have the sound come out of them. Let me know of any ideas! Hmm seems like the only option is to set the rear speakers to "Front Speakers" and change it to stereo in the Realtek HD audio. But still that take alot of steps and it doesnt not use the center speaker Thanks

  Read the article

• Piping stream into tar on FreeBSD

  - by Casey Jordan

  I am trying to pipe a tar/gzip archive into tar to decompress it. The script I have is part of a self extracting installer, where my archive is appended to the script. This works fine on linux, and the script looks like this: export TMPDIR=`mktemp -d /tmp/selfextract.XXXXXX` echo "TEMP: $TMPDIR" ARCHIVE=`awk '/^__ARCHIVE_BELOW__/ {print NR + 1; exit 0; }' $0` tail -n+$ARCHIVE $0 | tar xz -C $TMPDIR exit 0 __ARCHIVE_BELOW__ The tar archive as a string is after the ARCHIVE_BELOW but I omitted it from here since it's huge. However, when I do this on FreeBSD I get the following error: tar: Failed to open '/dev/sa0' I read that this is because free BSD expects to read from that device by default and you can tell it to read from stdin by passing -f - like so: tail -n+$ARCHIVE $0 | tar zxf - -C $TMPDIR However, when I do this I just get the error: tar: Damaged tar archive tar: Retrying... Can anyone point out what I am doing wrong here? I need to do it this way (Via piping) for efficiency reasons. Thanks

  Read the article

• Mac Mini 1.66 no sound on Windows 7

  - by Steph

  I've tried everything I could to get the sound working. I've tried to install the drivers from the Snow Leopard disk, then I went and got the latest RealTek drivers from the RealTek website. Then I read that old Mac mini's could have an integrated Cirrus chip, and I tried to grab the latest driver from the website, and it appeared to install, but nothing. There's also nothing listed under Sound and ... in the Device Manager. I've tried to manually include a legacy driver, which worked for RealTek but not for the Cirrus driver. Of course it said there was no RealTek hardware install, which makes me think it's a Cirrus chip. Any further suggestions or thoughts would be really appreciated. This is a Mac Mini 1.66. I'm also not sure how to be able to detect what card is integrated into the system, so that would be helpful too (remembering that there's no driver installed). Even just to get the chip type would be great to confirm.

  Read the article

• Reset Network Load Balancer Connection Pool

  - by bill_the_loser

  I am currently working on load testing a web application on a virtual machine cluster. I am looking for a way to flush the connection pool / NLB cache so that it is like each machine connecting to the NLB is connecting for the first time and doesn't get directed back to the node that it was on last time. This a Windows 2003 Server cluster, behind a Microsoft software based Network Load Balancer. Additional Information: To do the load testing I'm using virtual machines, one for each node on the cluster. Somehow I got two virtual machines connecting to the same node and I'm looking for an easier way to reset those connections without going in to the NLB Manager and stopping and starting each node on the NLB. Update: We went ahead and changed the affinity on all of the nodes of the cluster to none. Now it's a non-issue.

  Read the article

• Bluetooth not seeing mouse (Fedora)

  - by Chris

  I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• Does vmWare ESXi 4.0 U1 support the Promise SuperTrak EX8650 SATA card?

  - by RTNN

  Hi, can anyone tell me if vmWare ESXi 4.0 U1 has support for the Promise SuperTrak EX8650 SATA card? In the hardware support guide I find that VmWare should have support for the Promise SuperTrak EX8650 SATA card but only in version ESX 3.5. Is this card not supported for ESXi 4.0 U1 or what? From the hardware guide! Partner Name Model Manufacturer Device Type Supported Releases Promise SuperTrak EX8650 Promise Technology Inc SAS-RAID ESX 3.5 U5*1 1 , ESX 3.5 U4*1 1 Promise SuperTrak EX8760T Promise Technology Inc SAS ESX / ESXi 4.0 U1*2 2 , ESX / ESXi 4.0*2 2

  Read the article

• Re-deploy Reports on SCOM Management Packs

  - by Gabriel Guimarães

  I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Thanks in advance.

  Read the article

• Problems in Linux Mint 13 MATE with NTFS partitions

  - by usr

  I'm using Linux Mint 13 MATE (32 bit). With Caja file manager (based on Nautilus 2.x) I can create, modify and remove folders and files on NTFS partitions whitout problems. But, for example, when I have a compressed file (.zip, .7z, ...) in a NTFS partition I can't extract it (with File-Roller, Peazip, ...). But I can extract the same file in a ext4 partition perfectly. What might the problem be? Are there (maybe) file permissions for each application?

  Read the article

• QR Codes for Files on Google Code

  - by Synetech inc.

  Hi, When you download files from Google Code now (example), in addition to the text version of the SHA1 hash, it includes a QR code of it. The device that the file was downloaded to is the one that has to hash the file. But, if it can download the file (ie, has access to the webpage), it also has access to the text version of the hash, so the QR code seems completely useless—and more work to decode when the raw text is available. How would reading the hash into a mobile phone allow you to verify the file you download to the computer? Or if you download the file to the phone, how would you use the phone to take a picture of the QR code displayed on the webpage on its own screen? Does anyone know what the point to the QR code is or how you would use it to verify the downloaded file (I don’t mean QR codes in general, but specifically in this context).

  Read the article

• ECMP Load Balancing in JUNOS

  - by SpacemanSpiff

  I'm trying to figure out how to use ECMP load balancing in JUNOS. I know this isn't the best way to load balance, but its quick and dirty and gets done what I need to. In ScreenOS this was pretty easy. Device: SRX220 JunOS: 10.3R2.11 Here's what I've got so far: routing-options { static { route 0.0.0.0/0 { next-hop [ 1.1.1.1 1.1.1.2 ]; metric 10; } } maximum-paths 2; Will that do it? Tom

  Read the article

• Is the Realtek network driver on Windows Update fixed yet?

  - by Ian Boyd

  Months ago i was experiencing problems with my networking, and was hoping the updated Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) driver available from Microsoft on Windows Update would fix the problems. Instead, after the reboot, the network device failed to start, and the driver had to be rolled back. I'm not the only person to get this problem, it even was dealt with by a superuser. A co-worker experienced the exact same problem, and we independently came up with the same solution: hide the updated driver in Windows Update. So I've continued to have my network troubles, and i still need an updated driver. Is the version of the Realtek driver on Windows Update fixed yet? i know Microsoft never pulled it down, but maybe it's been up-updated. i really don't want to find out by downloading it. Can someone else confirm that it's no longer broken - or can someone else be my guinea pig?

  Read the article

• Wireless driver not detected by Windows 8

  - by rksh

  I've a problem in my wireless driver on windows 8. I bought a new X500L Asus laptop and installed windows 8 on it. However the driver CD I got with the laptop doesn't support my laptop. The CD says it's designed for Windows 8.1. I tired finding Wireless driver model and finding driver online and installing and that hasn't worked either, the wireless driver is shown at the device manager as not installed. I tired live booting the computer with a live CD of Linux and that also doesn't pick up my wireless driver. Can anyone tell me how to fix it? Thanks

  Read the article

• Why does storage's performance change at various queue depths?

  - by Mxx

  I'm in the market for a storage upgrade for our servers. I'm looking at benchmarks of various PCIe SSD devices and in comparisons I see that IOPS change at various queue depths. How can that be and why is that happening? The way I understand things is: I have a device with maximum (theoretical) of 100k IOPS. If my workload consistently produces 100,001 IOPS, I'll have a queue depth of 1, am I correct? However, from what I see in benchmarks some devices run slower at lower queue depths, then speedup at depth of 4-64 and then slow down again at even larger depths. Isn't queue depths a property of OS(or perhaps storage controller), so why would that affect IOPS?

  Read the article

• F5 BigIP upgrade from 9.x to 10.x

  - by mbuk2k

  Having a few difficulties upgrading a Big IP 3400 from 9.4.8 to any version 10.x image. The following are the versions I've tried: 10.1.0.3341.0 10.2.2.763.3 10.2.3.112.0 10.2.4.577.0 To upgrade I'm running the following command: image2disk --format=volumes BIGIP-10.1.0.3341.0.iso Obviously replacing the version number with the relevant image I'm trying to upgrade to each time. The F5 reboots, and starts copying packages however after 30 seconds or so just stops copying. The cursor in the console is still flashing but no matter how long it's left, the package doesn't copy. It seems to be a different package with each version/image (but always the same package per version) at point of freezing, which I'm guessing is suggesting a space issue? I've checked free space on the device and it has over 2GB free at root which should surely be enough? If anyone has any advice or pointers, it would be kindly appreciated. Thank you

  Read the article

• NFS-Root not working when booting over PXE

  - by Randy

  I am desperately trying to get a diskless client running over PXE-Boot using a NFS-Share as a root file system. I did this before some years ago but for some reason I am stucked at this since days. The TFTP-Server itself is running fine and booting a netinstaller works also fine. The kernel and initrd are loaded also but the bootprocess stops with this (screenshot) kernel panic. I'm using the squeeze standard i386-Kernel and I have prepared the initrd with this config: MODULES=most BUSYBOX=y KEYMAP=n COMPRESS=gzip BOOT=nfs DEVICE= NFSROOT=auto I also tried MODULES=netboot with the same outcome. My PXE-configuration looks like this: LABEL linux KERNEL diskless/debian-default/vmlinuz-2.6.32-5-686 APPEND root=/dev/nfs initrd=diskless/debian-default/vmlinuz-2.6.32-5-686 nfsroot=192.168.140.2:/storage/nfs-boot-images/default-squeeze ip=dhcp rw Furthermore I have captured the network communication of the client via tcpdump and learned that the client isn't even trying to connect to the NFS-share. Does anybody has got an idea what is going wrong here?

  Read the article

• Forward a port with modem (with built-in but disabled router) + a separate router

  - by Youn

  I have a Motorola SBG6580 that is a modem and a wireless router in one. However, the wireless router part was bad so I disabled it and got a separate wireless router. I can go into the configuration pages of both the modem and the router now, and I'm confused as to which device needs to be configured for port-forwarding. I have a raspberry pi that I want to set up as a webserver. Do I configure the router, the modem, or both? Right now, the SBG6580's 1st LAN is connected to the wireless router's WAN, and the internet is working well. Note that the SBG6580 only has 4 ports, and I'm assuming they're LAN,as they are not labeled.

  Read the article

• SMTP port open - but not open

  - by Frederik Nielsen

  As some of you might know, I am setting up an exchange server. Now I ran into another problem: I cannot connect to the SMTP service from outside the server! The ports are opened in the gateway device (a ZyXEL USG50), Windows firewall is off. I see the packets travekl through the ZyXEL firewall, and I can also see the packets with wireshark on the server, so I know they are getting all the way in to the server. I also know it receives them, and sends out the reply - and this is where things go bad! Analyzing with wireshark, I get these errors in the return packets: Header checksum: 0x0000 [incorrect, should be 0x0779 (may be caused by "IP checksum offload"?)] And: Acknowledgment Number: 0x8e3337d1 [should be 0x00000000 because ACK flag is not set] What the (sorry my French) hell is going on? I really cant figure it out.. Thanks in advance.

  Read the article

• How to prepare and secure a Macbook Pro for work/office?

  - by sunpech

  I plan to use my Macbook Pro at work/office. Before I do so, I will need to speak to my manager on how to properly prepare and secure it since this is the first Mac that will be regularly used on the network in the office and company intranet. The intranet comprises mostly of PCs running Microsoft Windows XP, Server 2003, and Windows 7. So there's definitely a Microsoft-only culture in the office, and the infrastructure/networking team are mostly unfamiliar with non-Microsoft technology and software. What steps and software would I need to prepare and secure my Macbook Pro for work/office? Antivirus/Spyware software for Mac required/necessary? What options do I have to encrypt files, or possibly the whole drive/partition? What network/firewall settings should be enabled?

  Read the article

• Reverse rdesktop or VNC overlay image!

  - by carlesso

  Hi all. I've got a central server (linux based) and many clients (Windows XP Embedded, afaik) in public places around my country. I need to have these clients to connect to the server with a "reverse" tunnel, that is to say that I need to control the clients from the server but the connection is initialized by clients. The requirement is that, during the connection, an overlay image (or something like that, like a modified version of login screen) is displayed. Some stuff like "Work In Progress". My first idea was to use vncviewer -listen and vnc in reverse mode, but cannot understand how to obfuscate the work I'm doing. Other idea was to use rdesktop in "reverse" mode, but it seems it does not support it. Using rdekstop reverse seems the nicest solution (I can login back the user was in before connection, the login manager - which I can modified - is displayed), but any hint will be appreciated! Thanks in advance!

  Read the article

• tag based file organizer

  - by Richie

  I'm finishing professional school and over the years have acquired a pile of notes and articles that I'd like to hang onto. I'd like to add to them and create sort of an archive of article and files that may be useful down the road. I'd also like to organize this collection of files not only by simple grouping but also with tags. I feel like that will make searching through them years later much easier. Suggestions on software that would be good for this? Just a general file manager, something that uses tags that can be attached to each file? Thanks

  Read the article

• (simple) linux HA with vmware vsphere?

  - by derhelge

  I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

  Read the article

• powertop keeps telling me to turn off the same thing, over and over

  - by Rory McCann

  I am running an ubuntu lucid laptop on battery. I want to make my power last as long as possible. Aswell as the normal things like turn down screen brightness, and turn off wifi, I'm using powertop. It will sometimes tell me things, e.g.: Suggestion: Enable USB autosuspend by pressing the U key OK, I press the U key to do that. However a few minutes later it will give me the same suggestion, it's as if it never enabled USB autosuspend the first time. It does this for other things aswell, not just USB autosuspend. e.g. it'll give me this message frequently: An audio device is active 100.0% of the time: hwC0D1 LSI ID 1040 Q - Quit R - Refresh A - Turn HD audio powersave on Is there anything I can do to make these choices 'stick'? Or do I have some unfortunatle hardware that won't obey linux? (If so, is there any way to confirm this?)

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help thanks...

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help

  Read the article

< Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >