Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 508/792 | < Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >

• Connect wired-only devices to a remote wireless access point?

  - by billpg

  Hi everyone. In building A, I have a Netgear wireless access point using WPA2. Works great, no problems. In building B, I have some devices that only have wired Ethernet ports. They can't see my access point. What I need is a gizmo that connects over-the-air to my access point in building A, talks WPA2, and converts the packets to and from a wired Ethernet port. Netgear-access-point in building A      (WPA2 WiFi) Wireless bridge device          <-- Looking for this.      (Cat5 ethernet) My devices in building B. I've looked for devices on Amazon, but the descriptions are infuriatingly unclear. It says it supports WPA2, but does it support it as a client? Grrr... Any recommendations please?

  Read the article

• How can I login to Ubuntu using a USB serial port?

  - by marc

  How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

  Read the article

• LM Sensors always returning same (invalid) value for one temp sensor

  - by pkaeding

  I am trying to monitor the temp sensors on a server, and plot them using Cacti. I have lm-sensors installed and working correctly. For example, here is the output from sensors: % sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8 C (crit = +100.0 C) temp2: +32.0 C (crit = +60.0 C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0 C (high = +105.0 C, crit = +105.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +42.0 C (high = +105.0 C, crit = +105.0 C) However, when I try to get this data via SNMP, I get only one sensor's temperature correctly, and another one always returns 100.000 C: % snmpwalk -Os -c public -v 1 10.8.0.18 -m ALL lmTempSensors lmTempSensorsIndex.1 = INTEGER: 0 lmTempSensorsIndex.2 = INTEGER: 1 lmTempSensorsDevice.1 = STRING: temp1 lmTempSensorsDevice.2 = STRING: temp1 lmTempSensorsValue.1 = Gauge32: 26800 lmTempSensorsValue.2 = Gauge32: 100000 So, my question is two-fold: Why is the second sensor that is returned by SNMP giving a value of 100 C (when it should be 32 C) Why are my CPU core sensors not being returned by SNMP?

  Read the article

• Backing up Initial and Running configurations for Nortel Baystack 325-24G

  - by i.h4d35

  I recently came across a Nortel Baystack 325-24G switch. This is the first time I've come across a Nortel device of any sort, so I am a little intimidated. My problem is that I have been trying to get the startup and running configurations via both the CLI and the Menus but its become quite apparent that it isn't like the Cisco Switches/Routers. I've searched online but have only found Configuration Guides by Avaya. Also I'd like to know - is there a way to take backups regularly (something like tftp)? Pardon me but I'm a n00b when it comes to routers and switches. Thanks in advance.. EDIT: Still havent found a way to get the running config via the CLI

  Read the article

• How to rescan and remount drives on Ubuntu Hardy or Jaunty?

  - by pts

  When I connect an USB drive to an Ununtu Hardy and Jaunty system, the system mounts the partitions found on the drive, and opens a Nautilus window for each mounted partitions. Within Nautilus, I am able to unmount partitions. What I need is a command or action which forces the system to rescan the available drives and partitions, and automount each not mounted partition, including those which I've manually unmounted from Nautilus. sudo /etc/init.d/udev restart or ... reload doesn't do this. As of now, I just unplug the USB drive, and commect it again, which will force a scan and a mount on that drive. But I want to do force the rescan and remount without unplugging anything, preferably without the user having the know device or drive names.

  Read the article

• Server Performance

  - by Burt

  We have a dedicated server that we use to stage websites (our test server). The performance of the server has become really bad and we regularly have to restart it. When performance is poor I have checked task manager for the processes and memory but everything looks OK. We use a content management system and it is always when using the admin section of this CMS that we notice the performance degrade which makes me think it may have something to do with DB calls the CMS is making. Does this sound viable? Any other sggestions of how I can go about testing this? Thanks in advance...

  Read the article

• Is it possible to install Windows 8 on the SanDisk ReadyCache 32GB SSD drive?

  - by halil ibrahim

  I bought the SanDisk ReadyCache 32GB SSD drive this week. I didn't know about the caching stuff and thought that I would be able to install Windows 8 on it. Now I'm using it as a cache drive with the ExpressCache software. But I wonder if it is possible to use this SSD as a primary system drive with an operating system installed on it. I've tried to format the disk via Windows Disc Manager Tool, but the format option is disabled. Only delete and information options are allowed. Can you help me with this?

  Read the article

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• Where to find and download a new suitable software? [closed]

  - by user63411

  Possible Duplicate: How do you find a new software to download? I see that the most time I spend on the computer I lose to just searching for suitable software. How you do it? What is your way to find software? Do you first go to a forum or google? Which torrent site? which P2P program, website or server? For example: "I need a software that have functions as a remote desktop and also lets you copy and paste (drag and drop - file manager). And after few hours searching on Google I downloaded LOGMEIN Pro2, but than I see that is just trial. So if I need to find alternative I will spend another whole day. Where to go? I am not an amateur but I need a better system. I need better introduction on how to find what is the suitable software.

  Read the article

• How to clear the list of "Notification Area Icons" in Windows 7?

  - by cliff.meyers

  I can't seem to find a way to clear the list of "Notification Area Icons" in Windows 7. Unfortunately I had installed a download manager (GetRight) which by default creates a tray icon for each download. I quickly disabled this but still have a ton of entries in that menu and it's annoying. I found an article that had me navigate to this key in the registry... HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify delete IconStreams and PastIconStreams, then restart, but it did not clear the list. Any ideas on this one?

  Read the article

• Which driver for "ATI Mobility Radeon HD 3650" in a laptop?

  - by Lasse V. Karlsen

  We have some HP laptops here that comes equipped with a video card that identifies itself as "ATI Mobility Radeon HD 3650", like this one. However, which drivers do we choose? As far as we can tell, HD 3650 is desktop cards, or at least there are no drivers listed for that series with "Mobility" in their name. If I pick the following on the ATI Driver Download page: Graphics Windows Vista 32-bit Edition Mobility Radeon Then the dropdown for the card model contains X300, X600, X700, X800, X1300, X1400, X1600, X1800, 9600, 9700 and 9800 models, but no "HD" nor "36xx series". However, if I change to just "Radeon" for the last selection there, I can find a "Radeon HD 3600 Series" model in the list. Also, if I pick "Windows 7" as the operating system, I can find a "Mobility Radeon HD 3000 series" card, but no 3600. So, which one to pick? The main reason I ask is that they all seem to have some kind of problem installing, so neither seems to be the right one (they all crash with "Catalyst Install Manager has stopped working".)

  Read the article

• Accidentally replaced the partition table using GParted in UBUNTU

  - by claws

  Hello, This machine has UBUNTU & wINDOWS XP. I'm currently logged into UBUNTU. I was just checking the features of GParted and accidentally clicked Device > Create Partition Table. A default MS-DOS partition table is created. Now if I re-start the Gparted there is nothing. Its showing entire disk as UNALLOCATED space. Lucky thing is All the drives (C:, D:, E:) are currently mounted and I'm in UBUNTU. I guess its possible to re-create the partition table using current status. But I don't know how? Can any one kindly tell me how to do this. This is a lab computer. If its not recoverable. I'm completely screwed!!

  Read the article

• External hard drive doesn't appear in Computer

  - by Thomas Clayson

  I cannot work out why this is happening. I have an external hard drive (which is an old laptop hard drive with an IDE to USB adapter). Plugging it into my computer powers it up. It spins correctly and the lights on the adapter flash normally. Uninstalling from hardware manager and plugging it back in causes Windows to "install new software", and it says it has installed properly. In Disk Management it comes up in the bottom part as Disk 2 with the right size (~60 GB), but not in the top half. There are three empty drives in the top half. They don't have titles or drive letters. Right clicking them bring up slightly varying context menus, but all with the options disabled. Here is a picture of my Disk Management screen: How do I make this drive show up in My Computer? I need to format it and use it as an external hard drive.

  Read the article

• How does one guarantee a remote client the same local IP address every time when connecting to a VPN?

  - by Joe Carroll

  I need to configure a VPN for secure remote access to a PACS serving DICOM radiological images. The DICOM standard requires that any clients accessing the PACS must be using a fixed IP address that is pre-registered in PACS. I haven't implemented this solution before and would appreciate any guidance. I believe it should be possible to use RADIUS on the server to authenticate users connecting to the VPN and with it assign each user their own specific local subnet IP address, which would be registered with the PACS. The server runs Windows Server 2003 R2 Enterprise Edition SP2 and the VPN device is a FortiGate 60C. The What would be the best and/or simplest way to set this up?

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• Amazon mount EBS

  - by William

  I'm trying to mount /vol to a EBS volume on an Amazon EC2 instance. I'm formatting the device to xfs, adding "/dev/sdh /vol xfs noatime 0 0" to my /etc/fstab file, making the /vol dir and mounting it and whenever I try to do anything with that volume (create a file in /vol, cd, ls, anything) or I try to run df the server just freezes. Anyone have any idea what this might be? It's driving me crazy. Edit: It seems to freeze after I mount, has nothing to do with doing any commands to the volume it's self.

  Read the article

• Force10 S60 remote management

  - by StaringSkyward

  We've got a Force10 S60 switch to replace an older Cisco. I can't find a way to give the switch itself an IP address on the local VLAN so I can ssh to it. The config guide talks about using either a management interface on a separate management network or dedicating e.g. a gigabit port as a management port with a dedicated IP address. Ideally I would like to do what we do currently with the Cisco switches, which is in effect give the entire switch an IP so it can be reached from any host on the same VLAN without having to use up a physical port on the switch or physically connect the management port to another device. Is this possible with the S60 and if so, how would you give it, say the address 10.0.1.1 in vlan 10 (10.0.1.1/24)? Thanks!!!

  Read the article

• Remote connection to SQL server doesn't use the instance name

  - by Max

  I have a web server with SQL express 2008 installed. I was trying to connect to this from my local machine using SSMS. After enabling TCP/IP in SQL configuration manager, starting SQL browser service and opening up the firewall I still couldn't connect using xxx.xxx.xxx.xxx\sqlexpress as the server name. Finally out of frustration I tried to connect taking off the sqlexpress instance name to just xxx.xxx.xxx.xxx and it worked! I'm really at a loss here as to why this works. What would happen if I installed more instances of SQL?

  Read the article

• Unable to play bluray movies or see bluray discs

  - by Jason Shultz

  I have a Optiarc BD ROM BC-5500S ATA Device and when I put bluray discs into the drive the computer doesn't read them. I hear the drive make 3 noises as if it's trying to read them. Nothing shows up in windows explorer. I am running windows 7 64bit. I can read DVDs and CDs just fine. Bluray seems to be the only problem. I have installed PowerDVD9, HP DVD Play and HP DVD Media Smart and nothing helps. My laptop is a hp dv7 1273cl. I bought it before the free upgrades to windows 7 were available so I wasn't able to get the upgrade and so HP won't assist me beyond telling me to format and reinstall Vista.

  Read the article

• Why do SNMP agents need MIB files?

  - by user1495181

  After reading up on SNMP and some of the questions help here I think understand the agent role as a SNMP service to device (Like SQL, it is an API to storage). When you execute a SQL query the SQL engine does all the work and returns the result - You don't need to be aware of how the storage and where the storage is done. But MIBs are not actual storage , so what is the role of my agent? if the agent only register the MIB like i follow in this tutorial, is it not used as handler at all? Say that I want monitor my application's pending request queue, so I want an agent that all SNMP request for application_pending_request will be fired for it and it will return the queue depth. Why do I need to have an actual MIB when all I need to poll my application queue in order to get result?

  Read the article

• wireless network with cable modem and access point

  - by hayri

  I have a Scientific Atlanta EPC2203 cable modem and a TP-Link TL-WA500G access point. When I connect my computer directly to modem with a CAT5e cable I have internet connection on my laptop (when i type ipconfig i see my external ip there, provided by isp). So I decided to have wireless network in the flat, allowing other devices to connect as well. I bought this wireless ap (TL-WA500G) configured Wireless security stuff, and connected it to my modem. With that configuration (by default AP has static ip of 192.168.1.254) only my computer can connect to internet over wifi, but not any other device. When I set the IP of AP to Dynamic IP (DHCP) it is the same. How should I change my configuration to enable all wifi devices to connect to internet?

  Read the article

• Is it possible to bind a windows key combination to currently open application?

  - by matt

  I use launchy on every box that I have to interact with for more than a few hours a day, and it certainly makes me more efficient, but I want more. I would like to have a key combination that would take a window that I use frequently, and is always open such as mRemote or FAR manager, and bring it to the foreground. I have been alt-tabbing around forever, and it's getting old if there are more than a few windows open. Anyone have any ideas on this? Thanks, matt.

  Read the article

• Is it possible to bind a windows key combination to currently open application?

  - by matt

  I use launchy on every box that I have to interact with for more than a few hours a day, and it certainly makes me more efficient, but I want more. I would like to have a key combination that would take a window that I use frequently, and is always open such as mRemote or FAR manager, and bring it to the foreground. I have been alt-tabbing around forever, and it's getting old if there are more than a few windows open. Anyone have any ideas on this? Thanks, matt.

  Read the article

• How to change GUI language in Outlook 2007

  - by user1466

  A new guy at work moved in from Denmark, which means that he initially logged in to our Outlook Web Access 2007 from a computer with Danish Windows. As a result, all the objects in the tree-view in Outlook are now in Danish. For example, "Inbox" is called "Indbakke". This prevails, even though he has now logged in locally on his assigned work computer which has English Windows. We're running Exchange 2003, if that matters. How do you change the language of the names of the objects in Outlook 2007? The "Microsoft Office 2007 Language Settings" tool doesn't do this, and I couldn't find anything relevant to this by googling either. In Exchange System Manager there are the "Details Templates" which define these things in different languages, but over on his mailbox there was no configuration option to change which language to use.

  Read the article

< Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >