Search Results

Search found 21184 results on 848 pages for 'cable internet'.

Page 513/848 | < Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >

• How to wire 20 computers and 20 phones and 1 server into LAN?

  - by John Smith

  I have currently 3 switches Two Netgear JFS524 with 24 slots, One Belkin with 16 slots. Server DSL Internet Router. Main question is how to connect switches together, two Netgear's are next to each other, yet one is about 100 feet away and holds about 5 computer and 5 phones. If i connect them with only 1 wire will that limit bandwidth? e.g. all 23 computers will be limited to speed of one CAT5e cable? If i connect switches with 2 cables will this give speed boost? What's the ideal scenario should i just move the third switch next to other two? Will the speed of computer connected to white switch be same as computer connected to top switch? Will moving white switch right next top switch and having 16 wires comming 100 feet instead of 1 wire comming 100 feet make it faster? EDIT 1: I actually have NETGEAR ProSafe GS105 Gigabit switch its only has 4 ports in it though, you think i can have use of it in current setup? Like connect all 3 switches and server into it and keep internet router and phone server on one of the slower switches EDIT 2: Everyone mention gigabit switches, but will they do any difference with 10/100 network cards? I then have to use gigabit cards in every computer too? I could in server perhaps, but users will be 10/100

  Read the article

• 2 nics. 2 Defaults Gateways

  - by andre.dias

  Here is my scenario: i have this server with 2 nics, each one with different IPs, connected to differents routers. Almost everything is configured whe way i need. Traffic coming from eth0 exits using eth0, traffic coming from eth1 exits using eth1. And there is a default gateway configured. $route: default IP 0.0.0.0 UG 0 0 0 eth0 With this configuration, the traffic generated in the server is going out using eth0 (lynx www.google.com for example). The problem is: the Internet link from eth0 went down today. The traffic coming from eth1 was ok...no problem. But the traffic generated in the server was a problem...the default gateway was out...no access do the Internet anymore (no more lynx www.google.com) So i added a new default gateway configuration, pointing to eth1. For 30 minutes i kept that way...2 default gateways, but just one was "working"...and everything was working just fine. But then i removed de eth0 gateway entry because, well, 2 default gateways is kind of weird. My question: is there any problem on keeping these 2 default gateways, one for each? So i don´t need to do nothing when one link go down again? $route: default IP1 0.0.0.0 UG 0 0 0 eth0 default IP2 0.0.0.0 UG 0 0 0 eth1

  Read the article

• Bitlocker-to-go on fixed drive

  - by Unsigned

  Scenario Two drives are connected to a computer. One via a SATA-to-USB interface, the other directly via a SATA-to-eSATA cable. The drive on USB appears as a removable drive, the drive on eSATA appears as a fixed drive. Both use NTFS. The USB drive offers Bitlocker-To-Go, the eSATA drive only offers BitLocker. Question It is my understanding that drives encrypted with BitLocker-To-Go include an app to allow Windows XP read-only access to the volume. Is this the only difference, and is there a way to use Bitlocker-To-Go on the eSATA drive? Update Another difference is found here: The recovery key is required when a BitLocker-protected fixed data drive configured for automatic unlocking is moved to another computer.[1] Assuming that does not apply to removable drives.

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• How do I set up failover for a single web server using two ISPs?

  - by Travis

  I have one web server and two WAN connections (1 cable, 1 DSL). DNS is run offsite, and points to the IP address assigned by one of the ISPs. How can I have the second connection take over when the primary one fails? I have seen that it is possible to have two A records, each pointing to a different IP, but it has several problems. What's the real solution to this? I imagine this is a very common issue. Thanks in advance!

  Read the article

• Server only powers (but doesn't POST) when IDE drive is powered

  - by Jookia

  So after a thunderstorm last night which did a little damage, a Gigabyte server has decided it's going on power on but not POST. If it is POSTing, it's doing a very bad job at telling me. No beeps, nothing. Power seems to reach the components though. CD Drive opens and closes. So after stripping it back, I've found that the difference between this behaviour and deciding it's not going to power on for more than half a second, is having a power cable plugged in to one of the IDE hard drives. Is this normal, or a sign that the PSU has had it?

  Read the article

• How do I maximize and check my gigabit transfer rate?

  - by J Penguin

  I'm trying to maximize my LAN transfer speed. LAN cards and switch are all gigabit on a CAT 6 cable. Modes are set correctly to 1000 full duplex. CentOS server Testing with ftp from both windows and fedora, I'm only having the speed around 11MB/s. On windows I notice that the first few seconds of file transfer I'm actually getting around 25MB/s before it drops to 11MB/s Can anyone please recommend me what my next step should be to increase this performance? Are there any utilities I can use to test the file transfer speed without taking hard drive speed into consideration? The only thing I know is the MTU which I will have to wait until the office hour is over before I can play with it. If there are anything else I should be aware of, please please let me know. Thank you!

  Read the article

• an unknown ip on network

  - by Ahmed safan

  In our office we have many PCs, all of them have static IP addresses. We had a problem with one server with ip 192.168.1.10 dropping off the network occasionally. I unplugged the network cable from the server and from pinged 192.168.1.10 from another host and there was a response. I searched all PCs to see if any has such ip but i didn't found a one. I changed the server ip to fix the problem, but I still find this rogue device using 192.168.1.10 on the network -- how can I figure out what it is? Could it be the ip of virtual machine on someone's PC?

  Read the article

• Stunnel delaying boot

  - by Onitlikesonic

  My stunnel implementation works fine when the network is plugged in but it takes an awful amount of time, which delays the whole boot process, when there is no network connected to the machine. As extra information: I'm using "delay=yes" I'm using an fqdn (e.g: stunnel.mydomain.com) for the connections Using ubuntu but this also happened with centos5 previously How can this be avoided or a timeout specified? edit: doing an strace as suggested by symcbean shows the following (including the last part where it hangs): [...] --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 0 close(3) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6039 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7ff9ce0c79d0) = 6046 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046 --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 6046 write(1, "[Started: /etc/stunnel/stunnel.c"..., 37) = 37 write(1, "stunnel.\n", 9) = 9 exit_group(0) = ? [...] stunnel hangs in this line: wait4(-1, and when i plug in the network cable it continues to show [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046

  Read the article

• Configure Domino to use SMTP routing and hMailServer

  - by Sébastien Lachance

  I have been trying for a couple of days to set up a Domino 8.5 server. Basically, I want everything to be run inside a local network. Right now I can send email to other user in the Domino directory without any mail address. I am pretty new to all this stuff, so maybe the answer will be really obvious. What I need to do is be able to send a mail from somewhere else to a domino user that will be redirected to his account. On the Domino server, I also have hMailServer installed on port 25. I configured Domino to use port 26. I followed those step to get where I am now. -I have set the Fully qualified Internet host name to "preview.notes". -Smtp Listener task changed to Enabled to turn on the Listener so that the server can receive messages routed via SMTP routing -Setting up SMTP routing within the local Internet domain (http://www.h2l.com/help/help85%5Fadmin.nsf/f4b82fbb75e942a6852566ac0037f284/7f9738a49efc4f58852574d500097b01?OpenDocument) -I modified the person to use the [email protected] address. -I'm using the hMailServer (which have the local "preview.local" domain name) to send mail to [email protected]. When sending mail I got an error telling that the DNS is not set up correctly. Is using the Domino Smtp server instead of hMailServer will solve the problem? I can Telnet the Domino Smtp Server.

  Read the article

• How do I increase my home's bandwidth?

  - by Derek

  I just mistakingly posted this on Stack Exchange but don't know how to delete it... Anyway, I was thinking of building a home server to use instead of renting a VPS, because in the long run it would be cheaper. What I'm concerned with is the bandwidth limit of my house. I know when I'm downloading something off the internet, if I download at high speeds the rest of the computers connected to my router will become slower. Is there any way to avoid this? There are other cable outlets in my house, will connecting a modem and router there avoid this problem?

  Read the article

• NAT ports - how do they work?

  - by Davidoper

  I have the following network schema: Computer A: three nics: NIC 1 (eth0): dhcp, public internet NIC 2 (eth1): static 192.168.1.1, gateway for Computer B NIC 3 (eth2): static 192.168.2.1, gateway for Computer C Computer B: static 192.168.1.2, using gateway 192.168.1.1 (NIC 2). Computer C: static 192.168.2.2, using gateway 192.168.2.1 (NIC 3). So I applied this to get NAT working: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Every computer can connect to the internet now. I have been applying rules to the main computer (Computer A), like dropping connections to some ports, e.g ssh: iptables -A INPUT -p tcp --dport 22 -j DROP But for instance, now I would like only allow connections for ports 20,21,22,53 and 80 in Computer C, and ignore the outside traffic if it's not related to those ports. The allowed connections should be FROM Computer C to outside, but not from outside to Computer C (I mean - Computer C is not hosting any HTTP or SSH, but it is going to use them as a client). I guess this sould be done like this: iptables -A OUTPUT -i eth2 -o eth0 -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth2 -o eth0 -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT The last rule (dropping any other traffic different from those) is at the end of the configuration, so -A should be working correctly. The thing is... it is not working. If I put the last rule like this: iptables -A FORWARD -i eth2 -o eth0 -j DROP It just drops everything and, for instance, port 21 (previously opened as you can see above) is not either working. Can you tell me what could I have done wrong? I have been struggling with this problem for some time and I am unable to solve it. Thanks!

  Read the article

• External Display connected to Macbook pro won't sleep

  - by Moiz

  I have Macbook Pro with OSX 10.6.8. It is connected to external display (HP 2311x) using Thunderbolt to HDMI cable. My Macbook display goes to sleep after every 15 minutes of inactivity but the external display won't go to sleep. It does try to go to sleep but wake up immediately. It does that in never ending loop. I have to manually turn off the external display. Is there some settings I need to change to make external display sleep when Macbook display goes to sleep? Any suggestions? Thanks in advance!!

  Read the article

• Change which server mailbox is associated with in Exchange 2007

  - by tacos_tacos_tacos

  I have restored and mounted an EDB file onto a new Exchange 2007 Server. However, the old server is still online and although all the mailboxes I need are in the newly-mounted database, in Exchange 2007 System Manager it still shows that the mailbox is associated with the old server. If I try to "Move" the database it actually tries to copy the files from the old server to the new server, which is not necessary because they are already there - and produces and error about the mailbox on the destination already existing. How can I simply tell Exchange (AD?) to use the new server to find the mailbox rather than the old? Edit: I did the restore by taking the old server offline (turning off all Exchange services), copying EDB file to the new server, restoring it with eseutil, and mounting it to the new server. I did it this way in part because I didn't know a better way and in part because I couldn't use move-mailbox as the source location had a horrible Internet connection (which is why Exchange is being moved to the new location). I had to copy the EDB from the old server to a hard disk, go somewhere with a better Internet connection, upload the EDB to the new server.

  Read the article

• Realtek HD Audio 5.1 Optical Input (from Xbox 360)

  - by Shevek

  I'm trying to connect up my Xbox 360 digital audio to my 5.1 speakers via my PC (my LCD has dual input, DVI for the PC, D-SUB for the Xbox). The motherboard has a Realtek ALC888 chipset and I have a 5.1 speaker system connected via 3 x 3.5mm jacks (FR/FL, RR/RL, C/LFE) and I get full 5.1 output from the PC. I have connected the optical audio cable from the Xbox to the Optical In on the motherboard's backplate. With the Xbox in Digital Stereo mode I get 2 channel audio from the Xbox, through the PC, to the speakers. With the Xbox in Dolby Digital 5.1 mode I get no sound at all. I have the latest Realtek drivers installed in Win 7 32-bit. Questions: Is it possible to use the full 5.1 DD from the Xbox? If so, am I missing some option(s) in the Realtek setup? Do I need some other piece of software to do this? (AC3Filter or FFDShow perhaps) Many thanks

  Read the article

• How to prevent Ubuntu from combining networks on 2 NIC server?

  - by SolarPower

  I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

  Read the article

• Overriding routes on Openvpn client, iproute, iptables2

  - by sarvavijJana

  I am looking for some way to route packets based on its destination ports switching regular internet connection and established openvpn tunnel. This is my configuration OpenVPN server ( I have no control over it ) OpenVPN client running ubuntu wlan0 192.168.1.111 - internet connected if Several routes applied on connection to openvpn from server: /sbin/route add -net 207.126.92.3 netmask 255.255.255.255 gw 192.168.1.1 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 And I need to route packets regarding it's destination ports for ex: 80,443 into vpn everything else directly to isp connection 192.168.1.1 What i have used during my attempts: iptables -A OUTPUT -t mangle -p tcp -m multiport ! --dports 80,443 -j MARK --set-xmark 0x1/0xffffffff ip rule add fwmark 0x1 table 100 ip route add default via 192.168.1.1 table 100 I was trying to apply this settings using up/down options of openvpn client configuration All my attempts reduced to successful packet delivery and response only via vpn tunnel. Packets routed bypassing vpn i have used some SNAT to gain proper src address iptables -A POSTROUTING -t nat -o $IF -p tcp -m multiport --dports 80,443 -j SNAT --to $IF_IP failed in SYN-ACK like 0 0,1 0,1: "70","192.168.1.111","X.X.X.X","TCP","34314 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18664016 TSER=0 WS=7" "71","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584430 TSER=18654692 WS=5" "72","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584779 TSER=18654692 WS=5" "73","192.168.1.111","X.X.X.X","TCP","34343 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18673732 TSER=0 WS=7" I hope someone has already overcome such a situation or probably knows better approach to fulfill requirements. Please kindly give me a good advice or working solution.

  Read the article

• Windows 7 wireless not seeing any networks

  - by jkohlhepp

  I think I have managed to confuse Windows 7. When I did the install, I had the network cable plugged in to my router, but the wireless card was also enabled. During the install, Windows 7 seemed to see my wireless network and even asked me for the WEP key. I know that it used the WEP key because I initially entered an invalid one and it gave me an error. Then the network said "SoAndSoWireless Connected". However, when I unplug or disable my wired network card, then I have no internet, and it can't see any networks. When I plug in the wired network card, it says "SoAndSoWireless Connected". Under Network and Internet Network Connections I have "Local Area Connection" and "Wireless Network Connection". The wired one's status is "SoAndSoWireless" and the wireless status is "Not Connected". Also, the wireless connection can't seem to see any other wireless networks in the area and I know there are tons. My neighbors have several. I've somehow seemingly confused Windows 7 into thinking that my wired network card is my wireless card or something. Any ideas on how to un-confuse it? This is a desktop machine by the way, if it matters. EDIT: Ah, I think part of the problem is that I named my network accidentally the same as the name of the wireless network being broadcast by the wireless router. So that might be why it says that name on the hard-wired connection. Perhaps the drivers just are completely not working for the wireless card. Thanks, ~ Justin

  Read the article

• BGP Multipath & return routes

  - by Dennis van der Stelt

  I'm probably a complete n00b concerning serverfault related questions, but our IT department makes a bold statement I wish to verify. I've searched the internet, but can find nothing related to my question, so I come here. We have Threat Management Gateway 2010 and we used to just route the request to IIS and it contained the ip address so we could see where it was coming from. But now they turned on "Requests apear to come the TMG server" so ip addresses aren't forwarded anymore. Every request has the ip of the TMG server. Now the idea behind this is that because of multipath bgp routes, the incoming request goes over RouteA, but the acknowledgement messages could return over RouteB. The claim is that because the request doesn't come from the first known source, our proxy, but instead from IIS, some smart routers at the visitor of our websites don't recognize the acknowledgement message and filter it out. In other words, the response never arrives. Again, this is the claim. But I cannot find ANY resources on the internet that support this claim. I do read about bgp multipath, but more in the case that there are alternative routes when the fastest route fails for some reason. So is the claim completely bogus or is there (some) truth to it? Can someone explain or point me to resources? Thanks in advance!

  Read the article

• Replacing local home server with VPS: Suggestions?

  - by CamronBute

  So right now, I'm running an old box with a 2TB HDD in it. I use this as a file server for the home network, as well as a box for downloading large files which are synced via Dropbox. Lots of other tinkering things, too. Basically, I'm sick of paying extra for the power and having to worry about drive failures and whatnot. I'd rather get a remote server, let someone else manage it and provide access from the Internet. So, I've been looking for a Windows VPS that would give me access to install things and tinker, and I'm having a problem finding a host that offers more than 100GB of hard drive space. If they do offer a package with 100GB of storage, everything else is waaayyyy more than what I actually need. The idea is to create a permanent VPN connection from the cloud server to my home network to provide a transparent solution so I'm not having to go to lengths to transfer files or whatnot. I think a VPS solution will allow me to do this. I would like 1TB of storage space, minimum 100Mbps Internet connection, minimum 250GB bandwidth, admin access. Anyone have anything? Or am I being unreasonable? If I am, why?

  Read the article

• Configure TV Capture card to not use external audio jack for TV audio output

  - by Adam D.

  I had this working with MythTV on Ubuntu 9.1. Then a power surge killed the motherboard. After replacing the motherboard, ram and cpu, the card does not produce any audio except through the output jack on the back of the card. I do not want to use a cable to go from the back of the card to the audio in on the built in sound card of the new mother board. FYI, the old motherboard did not have an on-board sound card. There was a separate audio card installed. There's some configuration that has to be done to have it work the same way again. I just have no idea where to start. This is regarding wintv hauppauge mythtv linux ubuntu 9.10 audio

  Read the article

• Cannot see main user profile directory on old vista hdd on win7

  - by chaoskreator

  I have an old laptop HDD that ran Vista that I need to get some pictures and movies off of. I've attached it via SATA cable to my new Win 7 (64 bit) machine and it mounts fine, except I can't see the main user profile in the D:\Users directory. I've changed ownership and permissions for the D: drive to my C:\ Username but still no luck. I read something about it being caused by the UAC being active on the Vista machine. Is this true? Is there a way to disable this and gain access to the main profile without putting it back into the old laptop (it's fried and won't boot)?

  Read the article

• Moving Portable Office. Have a LAN & Phone line query?

  - by John Smith

  We are about to move a portable office that has 8 phones and 12 lan connections. They are all wired back to our main switch and Nortel bcm200 phone system which are only about 20m (65ft) away. After the move the office will be 180m (600ft) away from these. What is the maximum length of cable a digital phone line can be? I am aware that a lan connection can only be 100m (305ft) when using cat5e utp. Does this rule apply to phone connections also? If so how can I extend beyond 100m for the phones? I was going to install about three cabinets, 3 switches and 6 patch panels for the lan connections but the ideal struck me tonight that maybe I could run a fibre optic line. Would this be feasible? Any feedback on this is greatly appreciated. Thanks

  Read the article

• RRAS NAT not working on a certain computer

  - by legenden

  This is driving me crazy. I have a virtualized W2K8 server running RRAS. Every other computer or server on the network can access the internet through the NAT except one. On one server, it just won't work. I can ping the ip address of the NAT gateway just fine, and everything else works. (SMB, etc) DNS, which is hosted by the same server, also works just fine. I have even reinstalled the OS on the problem server and it still doesn't work. Recap of the steps I tried: There are 3 network cards in the server, I tried every one and different switch ports. Not a hardware problem. Reinstalled W2K8 R2 on server with the problem, didn't help. Tried the IP of the internet gateway directly - this did work (!). But I need NAT to work. All firewalls are disabled. Removed computer from domain, deleted computer membership in Active Directory Users and Computers and added it back. Disabled all other network adapters and set a static ip and specified the gateway ip manually. When I tracert a public IP, the first hop (or any other hop) comes up as: C:\>tracert www.google.com Tracing route to www.l.google.com [209.85.225.106] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. From a different computer, on which NAT works, the first hop comes up as: tracert www.google.com Tracing route to www.l.google.com [209.85.225.105] over a maximum of 30 hops: 1 <1 ms * <1 ms xxxx [10.5.1.1] This is the most bizarre problem I ever came across, and I realize that it's a long shot asking it here given all the details, but I'm pulling my hair out. Maybe someone has an idea...

  Read the article

• Cisco Catalyst 3750 connected to Cisco ASA 5505 and dropping packets

  - by Bo102010

  (Cross posted from Super User per suggestion there) At the office, I have inherited a network that I am still trying to fully comprehend. I have a problem today with a new connection between: A port on a Cisco Catalyst 3750 [WS-C3750G-48TS-S running C3750-IPSERVICESK9-M version 12.2(53)SE1] A port on a Cisco ASA 5505 [ASA Software version 8.3(2)] The 3750 is home to a Vlan that has a few ports assigned to it. interface Vlan3 description Internal network (172.18.160.0/24) ip address 172.18.160.1 255.255.255.0 I have a host (outside of my control) that needs to be in this VLAN (i.e it must have an address 172.18.160.something/24) that also needs to access the Internet. To accomplish this, I ran a link from the Catalyst (Gi1/0/13) to the ASA (Ethernet 0/5). I configured the Catalyst port like so: interface GigabitEthernet1/0/13 description To ASA, 172.18.160.69 switchport access vlan 3 switchport mode access speed 100 duplex full I configured the ASA like so: interface Vlan1 nameif inside security-level 100 ip address 172.18.160.69 255.255.255.0 interface Ethernet0/5 speed 100 duplex full Then I plugged the host into Ethernet 0/4 on the ASA and instructed its owner to make its default gateway 172.18.160.69. I made a NAT rule in the ASA and set up some rules, and it's able to access the Internet without issue. However, I noticed that the Catalyst reports a ton of packets being dropped toward the ASA. Catalyst3750#show interfaces GigabitEthernet 1/0/13 | include counters|drops Last clearing of "show interface" counters 00:28:13 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 136909347 This is a huge number of drops, since there's not much traffic on this VLAN at all. I tried these things: Make sure speed and duplex agree on both sides (100 Mbps / Full) Set no cdp enable on the Catalyst Gi10/13 Set no keepalive on the Catalyst Gi10/13 Checked for excessive CPU usage on both Checked for excessive traffic on both Am I missing something? Any help would be appreciated.

  Read the article

< Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >