Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 52/468 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59 | Next Page >

Internet slow on one router only [the problem only in Ubuntu] [on hold]

- by mrSuperEvening

Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

Read the article
Putting Ubuntu Server on to a networked HDD

- by SimplySimon

Firstly, I know very little about servers and secondly the 1Tb HDD I have has network capabilities, but no software is installed on it, so when connected to the computer it is seen as a network connection, but not as a drive. Any advice on how to get started would be great. Up until now, I have been using it as a USB drive which worked well, but when this is sorted, I would like it to be connected directly to our BT HomeHub accessible through the WiFi for all the family to use as a film and back up repository. I would then be able to set up individual accounts for each family member to use and may be, if possible, make it accessible from outside locations. The First question then is: How can I install Ubuntu server on the 1Tb HDD attached directly to the computers network port but which doesn't show up in Nautilus? HDD Western Digital 1.0Tb LBA 1953525168 Model: WD10EACS-00DB0 DCM: DHRNHT2CF

Read the article
Serializing network messages

- by mtsvetkov

I am writing a network wrapper around boost::asio and was wondering what is a good and simple way to serialize my messages. I have a message factory which can take care of dispatching the data to the correct builder, but I want to know if there are any established solutions for getting the binary data on the sender side and consequently passing the data for deserialization on the receiver end. Some options I've explored are: passing a pointer to a char[] to the serialize/deserialize functions (for serialize to write to, and deserialize to read from), but it's difficult to enforce buffer size this way; building on that, I decided to have the serialize function return a boost::asio::mutable_buffer, however ownership of the memory gets blurred between multiple classes, as the network wrapper needs to clean up the memory allocated by the message builder. I have also seen solutions involving streambuf's and stringstream's, but manipulating binary data in terms of its string representation is something I want to avoid. Is there some sort of binary stream I can use instead? What I am looking for is a solution (preferrably using boost libs) that lets the message builder dictate the amount of memory allocated during serialization and what that would look like in terms of passing the data around between the wrapper and message factory/message builders. PS. Messages contain almost exclusively built-in types and PODs and form a shallow but wide hierarchy for the sake of going through a factory. Note: a link to examples of using boost::serialization for something like this would be appreciated as I'm having difficulties figuring out the relation between it and buffers.

Read the article
atheros wireless ar9285 driver

- by nikola

I have been having problems with wireless on Ubuntu 10 and above, Mint 11 and above. The problem is in the driver for the wireless... I can see that there is no driver installed and yet it works but reduced a lot, for example: on windows 7 ultimate 100% on distance of 1 meter (currently running) Mint Cinnamon 15 on same distance 70% when it goes under the 40 % it simply disconnects and than takes a lot of time to connect again I am new to Linux and I don't know anything about programming, yet I love the interface and look of the OS but don't want to reject it for couple of problems. There is, however, a problem with brightness control on laptop, it shows the notification and slider but with no effect The question is: Can somebody explain to me where to download and how to install the ar9285 driver for atheros wireless card laptop acer emachines eme529? or can someone explain this to me only for the LINUX MINT 15 http://www.jrhenkelmann.net/index.php?option=com_content&task=view&id=34 because the synaptic's interface is different than of mint 15 I KNOW this is Ubuntu community but the problems persist in all Linux versions

Read the article
Network programming under windows: is WSA functions can be more complete than pSock functions [on hold]

- by Kane

I plan to make a set of classic socket functions to simplify their usages. Since i work under windows and linux indifferently i usually make it portable (it's not my first version of this set of functions), but i want to do something different this time and dedicate one version to windows, and one other to linux. With that i wonder for the windows version, if the WSA* functions can have any interest using them instead of the psock ones. I have found nothing about a comparison between them, so if any of you have any idea, suggestion, link or benchmark ?

Read the article
Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

- by user42424

So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

Read the article
Driver for asus wireless PC card WL-100GE

- by emab

I have bought an Asus wireless LAN PC Card WL-100GE model, and I am using lubuntu on my system. While I have no cable connection, currently I cannot access the internet and update my laptop. Device: Broad Range Wireless Card Bus Adaptor - Asus - WL-100GE I searched the web and couldn't find any adequate driver for it. Is there any solution for it? My sudo lshw -C network output is: *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:02:3f:ba:55:c8 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=128 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:3000(size=256) memory:e0200800-e02008ff *-network description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:07:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:21 memory:38000000-38001fff ----:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.

Read the article
Cannot access windows share

- by Wrigley

I have an accounting program specifically tailored to the IT industry, its called Fincon (exe based). It basically works on a client to server directory base system. the server is currently running on a windows 7 machine with a NTFS partition. I have installed Wine. Have the shared Windows directory mounted with what I assume is the correct command for such being (mount -tsmbfs //servername/sharedir /mnt/fincon -0 usename=username,password=password). I can see the shared dir although it does take a bit long to access it on the Ubuntu machine via the mapped directory but instant via normal network browsing. I have also set up the mapped directory to my D: drive in Wine and have pointed the fincon.ini to read server field from D: directly. Here's my issue, it seems that for some odd reason I cant write to the mapped directory from Ubuntu, yet I can with my Windows machines, the permissions are set correct on the Windows 7 share and I really dunno what I'm missing. I'm quite a Linux noob just switched yesterday. Thanks guys for any help in this would be quite appreciated. As I'm pulling out my hair here and really want to migrate my work PCs to a Linux OS as it just gives less issues than Windows does ever.

Read the article
Connection to openVPN Access Server

- by Beig

we are using an openVPN Access Server and I would like to connect to it via the VPN network setting (network-manager-openvpn). I downloaded the client.ovpn and I can connect to the server via the command line: openvpn --script-security 2 --config client.ovpn How can I add the connection to the network manager? Which (key) entry is which? User Cert, CA Cert, Private Key? Here is an example of the client.ovpn http://nopaste.info/c10ec207f2.html Thanks in advance.

Read the article
When Ubuntu Server restarts eth0 Doesn't come back up

- by JoelGsus

Every time I restart my Ubuntu Server 11.10 I can't ssh into it because ETH0 doesn't come up automatically. I never had this problem before upgrading to 11.10. I have to login to the server and start the ETH0 manually. I would appreciate it any help. Thanks. Here is my /etc/networks/interfaces file: #The loopback network interface auto lo eth0 iface lo inet loopback # The primary network interface iface eth0 inet static address 192.168.1.102 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 gateway 192.168.1.1

Read the article
Printing Problem on Shared Printer

- by paulus_almighty

I'm using Ubuntu 11.10 on two machines. One has a USB printer connected. I want to share this printer with the other over the wireless network. Under Printing > Server > Settings: I have Publish shared printers connected to this system and Allow printing from the internet enabled. All other checkboxes are disabled. When I right click on the printer icon, I can see enabled and shared are ticked. On my other machine, I can now click on add network printer. It finds the machine name of the server and correctly identifies the printer. However, print test page fails. Under printer properties the printer state says: Processing - Unable to connect to printer; will retry in 30 seconds... What's gone wrong?

Read the article
How to make ip Address static (eth0)

- by Jordan Angelucci

I'm having a really hard time configuring ubuntu 13.04 to have a static ip address. I have tried multiple solutions but everytime I reboot (can't do the network reset command because ubuntu freezes) I end up with no connection. Here is what I get when i type ifconfig into the terminal: eth0 Link encap:Ethernet HWaddr 10:bf:48:bc:07:cb inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::12bf:48ff:febc:7cb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1763067 errors:0 dropped:0 overruns:0 frame:0 TX packets:1024326 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2284491220 (2.2 GB) TX bytes:136809317 (136.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1840 errors:0 dropped:0 overruns:0 frame:0 TX packets:1840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185688 (185.6 KB) TX bytes:185688 (185.6 KB) I have also tried this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.160 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 24.222.0.94 dns-nameservers 24.222.0.95 If anyone could help me it would be very much appreciated.

Read the article
How do I set up a server for SSH?

- by Rob S.

At my workplace (a university) we have two Ubuntu servers. One is a teacher server and the other is a student server. I am currently setting up a new server to replace the existing teacher server. The new server is currently online and I am trying to get it setup so I can SSH into it from my home. Right now, I can SSH into the existing teacher or student server and then SSH into the new server. However, I can not SSH directly into the new server. What must I do so that I can SSH directly into the new server? Thank you very much in advance for your time.

Read the article
Unable to remove network proxy

- by Rushil

I'm on 11.10 I'd set up a network proxy a couple of days back from system settings .And afterwards I'd set my proxy method back to none. However, my proxy has not been removed. I know this because: a: 127.0.0.1 routes me to the index.html file in the base directory of the proxy server. b: I'm able to access my university internet after hours. I checked my /etc/environment and etc/apt/apt.conf file and both of them have no proxy details. I also tried resetting the proxy and then getting rid of it but that didn't work either.

Read the article
upgrade from 11.10 to 12.04 killed my network connectivity

- by Daniel

I have a wired network connection that worked fine in version 11.10. I upgraded to 12.04 and immediately after the upgrade was completed, the OS reported my "cable unplugged". It is not unplugged and it is not defective. I have a D-link DFE-530TXS 10/100 ethernet NIC and I see what seems to be the generic 10050 driver loaded. Is there any way to just flush anything and everything to do with the network configuration and have Ubuntu reset/find everything again? If not...is there any way I can get it to realize that my network cable is not unplugged? (considering it worked mere minutes before). Thanks.

Read the article
Network print to brother MFC-7420

- by trampster

I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine. The brother is attached to a windows XP machine and is shared. This is what I have tried: System-Administration-Printing, Add, Expand Network Printer, Windows Printer via SAMBA, Browse (I can find the printer no problems here), Foward, Choose Driver Dialog, Brother, My printer is not in this list So the next thing I tried was to download the printer driver from here http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html The driver installed fine but my printer still does not appear in the list. I also tried installing the cups wrapper but that gave the following error. Restarting Common Unix Printing System: cupsd [ OK ] cp: cannot stat `/usr/share/cups/model/MFC7420.ppd': No such file or directory dpkg: error processing cupswrappermfc7420 (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: cupswrappermfc7420 I tried connecting the printer directly but even though I have installed the driver, when I go to printers and click on the printer (it shows up fine as a USB printer) then it say searching for drivers and then gives me a list, this is the same list as before which doesn't have my printer. It really shouldn't be this hard. on window you don't have to installing anything it just works and the same is true for my brothers Mac. How do I print to my printer?

Read the article
Wired card not connecting after trying to connect

- by Mike

I have an Ubuntu 12.10 PC. When I plug in my internet cable it starts connecting and after a minute it says it can't connect. I tried different cables but nothing works. Wlan works. I think it's the network driver but I don't know how to install/update it. Here's the ifconfig info (if it helps): eth0 Link encap:Ethernet HWaddr 00:01:6c:39:2a:8d inet6 addr: fe80::201:6cff:fe39:2a8d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2011 errors:0 dropped:362 overruns:0 frame:0 TX packets:586 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:175452 (175.4 KB) TX bytes:147211 (147.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9779 errors:0 dropped:0 overruns:0 frame:0 TX packets:9779 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8460080 (8.4 MB) TX bytes:8460080 (8.4 MB) wlan0 Link encap:Ethernet HWaddr 08:10:74:35:99:9d inet6 addr: fe80::a10:74ff:fe35:999d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1790 errors:0 dropped:0 overruns:0 frame:0 TX packets:3250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:401664 (401.6 KB) TX bytes:2898773 (2.8 MB)

Read the article
Best strategy to discover a web service in a local network?

- by Ucodia

I am currently doing some research for a project. The setup is simple, I have a computer running a service in my home network and any device connected to that same network should be able to discover the service automatically and use it. I have no specific technology requirement whether it is on the server or client side. The client knows about the service definition. Other than that I have no idea what strategy to use, what technology to look at or whether I should go for a SOAP or a HTTP based service. I think going HTTP with REST API is the best for targeting all devices but I am opened to any suggestions. Thanks.

Read the article
All my bandwidth eaten up - report included

- by Mel

I have my network bandwidth eaten up totally. Whenever I connect my network, without any application being opened it is always full. I have prepared report of iftop, nethogs and network system monitor. iftop and nethogs My host IP is 192.168.1.203 and all the rest are not known though I have tried to pin 192.168.1.105, it doesn't reply. If possible I would like to block the most disturbing IP which is 192.168.1.105 to block it. but don't know how.

Read the article
How can an application (like Firefox) be forced to use a certain network interface?

- by Lekensteyn

I've two interfaces: eth0 and wlan0 on a notebook. Possible use cases: eth0 grants me Internet access, and wlan0 is currently connected to a router which does not have Internet-connectivity. For development purposes, I need to connect to the wlan0 by default, but use eth0 for surfing eth0 and wlan0 are both connected to the Internet. For a torrent application, eth0 should be used for speed, but for portability of the notebook, SSH should have a connection over wlan0 eth0 is a wire connection, wlan0 is a wireless one. Sensible data should be transferred over eth0, but other traffic can go over wlan0 as well. Is there a way to force applications (like nc.traditional or firefox) to use a certain network interface? A wrapper like example-wrapper eth0 program is fine too if such program exist. It would be nice if it could configured within Firefox (in runtime). I'd like to avoid IPTables solutions if possible.

Read the article
Lag compensation with networked 2D games

- by Milo

I want to make a 2D game that is basically a physics driven sandbox / activity game. There is something I really do not understand though. From research, it seems like updates from the server should only be about every 100ms. I can see how this works for a player since they can just concurrently simulate physics and do lag compensation through interpolation. What I do not understand is how this works for updates from other players. If clients only get notified of player positions every 100ms, I do not see how that works because a lot can happen in 100ms. The player could have changed direction twice or so in that time. I was wondering if anyone would have some insight on this issue. Basically how does this work for shooting and stuff like that? Thanks

Read the article
Adding a 'network' USB printer

- by AndrewK

I have a HP Deskjet 1050a printer, hence the 'network' in the title. Its a bog standard USB home printer. I have it attached to my router (has a USB port in it). I have got it connected and working to with Win8 PC and also a MacBook Air. Can't seem to get it to add as a printer to my Xubuntu laptop(s). It doesn't get detected automatically (not an actual network printer) and i've tried multiple options to get it working. It seems to add it but when printing a test page its saying the printer isn't connected. Ping works fine so it can see it, just can't add it as a printer. With Win8 I had to create a port with the IP of the printer (192.168.1.253 in this case), is there an Ubuntu alternative to do this?

Read the article
Proxy authentication box not showing (sometimes)

- by zerologiko

I'm behind a proxy that require authentication by means of user/pass. I'm using Ubuntu 11.04, I think the proxy is "Squid". Usually everything works fine, that means that the browser shows me the window to insert proxy user/pass and I can navigate. The problem: Sometimes the browser refuse to show the authentication windows and if I wait enough it gives me an error like: Errore 130 (net::ERR_PROXY_CONNECTION_FAILED) Even if I restart, disconnect, the situation doesn't change. BUT on Windows the network (and the proxy) works.. So, bottomline what I know is: the network is working (though only on Windows) the Ubuntu configuration is ok (because i can navigate most days) The problems resolves itself in a few hours but I don't understand why. Some hints? Thanks in advance! Andrea

Read the article
Can't connect to windows 7 ad-hoc network

- by Nikolaj

Good day! I have installed ubuntu 12.04 on my laptop and I need to have network connection on it. Have a desktop PC, where I've created ad-hoc wi-fi network(Windows 7) and can't connect to it. So, problem: I see my network in the list of networks to connect, but I cant connect to it because it's grey color and not active(can't click on it). Could somebody help me to solve that problem? Thanks in advance!

Read the article
LAN or workgroup with Ubuntu server and windows clients

- by Kenneth Fernando

I have 35 windows7 standalone computers right now and planning to setup a LAN/workgroup using ubuntu as a server if its a LAN. Purpose for network.. Files from client computers to be accessed by me and vice versa through a shared folder on the server. Files only include word documents and very small project files. The network wont have Internet at the moment. What I would like to know.. How would i configure the ubuntu server to recognize the clients and will the clients be able to view the shared folders through their windows machines simultaneously? Would appreciate feedback. Thanks

Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59 | Next Page >