Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 523/792 | < Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >

• Performance improvements of VBulletin by integrating the plugins

  - by reggie

  I have amassed quite a lot of plugins and code that is being hooked into VBulletin's plugin system. There are good uses for this system. But since I am now locked in with the VB 3 branch and it is no longer updated, I wonder what kind of performance improvements I would see if I integrated all the plugins into the vbulletin files and turned the plugin system completely off. My site has about 1.5 mio posts, about 100,000 threads, 100,000 members (of which 10,000 are "active"). I estimate I have about 200 plugins from different products in the plugin manager. Has anybody ever tried this move and could share the experiences?

  Read the article

• Identify SATA hard drive

  - by Rob Nicholson

  Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

  Read the article

• VGA no signal on LCD monitor attached to laptop

  - by Paul

  I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

  Read the article

• Windows 8 Start Screen: Show programs in order of most frequently used

  - by Johnny W

  For me the Windows 8 Start Screen is just a great bit version of the old Start Menu, but unlike the Start Menu, it doesn't seem to order programs by frequency of use? Consider the following: While I DO use Chrome, Steam, and iTunes a lot. I've never ran Adobe Media Encoder, nor Adobe Extension Manager, nor Acrobat Distiller, or indeed most of the things on that list! Or there a way to change sorting to most frequently clicked on? Or perhaps even create FOLDERS in which to group items (e.g. "Adobe Apps" or "Games" or "Microsoft Office"?). Dragging them one at a time takes an age!

  Read the article

• Apache on Mac Mavericks issue

  - by Michael

  Trying to run Apache so that I can create a testing server on my mac.When I start apache it starts, but it doesn't run (no connection to local host. Ill upload the unix,you'll see that after starting there is no processes, and I did a check to show you what was running on my port 80... I don't entirely know that means. Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start Michaels-MacBook-Pro-3:~ michaelramos$ ps aux | grep httpd michaelramos 348 0.0 0.0 2442000 624 s000 S+ 8:51AM 0:00.00 grep httpd Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start org.apache.httpd: Already loaded Michaels-MacBook-Pro-3:~ michaelramos$ sudo lsof -i ':80' COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ocspd 96 root 18u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 20u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 21u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED) ocspd 96 root 23u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED)

  Read the article

• Afraid computer is not secure

  - by Michael James

  I have recently implemented LastPass as a secure password manager. When I changed the password for my email address an associated account ([email protected]) that i had never seen before came up in association with my account. It asked me if i wanted to change password for my account and the "smithfaketester" account I used Google to try and find out what is going on, but came up empty. I am afraid my computer is bot net-ed. Any input is greatly appreciated. I have used google to search for reasons why this fake account was coming up but I did not find any meaningful info.

  Read the article

• Finding spoofed IP address on network

  - by Jared

  I have a few IP spoof dropped messages coming out of my Sonicwall firewall, we'll call them Source A and Source B. Both of these sources have the same mac address indicating they're coming from the layer 3 switch behind my firewall. Source A has an ip within a valid subnet on my network and it shows up in the ARP table of my layer 3 switch. I was able to trace the exact location and fix the issue. Source B's ip however, is not within valid subnet on my network and it's not showing up in my layer 3 switches arp table. Any idea how I can trace the location of this device within my network? Thanks in advance.

  Read the article

• International Dvorak keyboard doesn't trigger hot-keys

  - by akurtser

  I'm using the Engilsh-Dvorak keyboard-layout; My second keyboard language is Hebrew, which has nothing to do with Dvorak but the hot keys (e.g if I'm writing a document in Hebrew and want to make some bold text using Ctrl+b). The default Hebrew keyboard that comes with Windows (7 and below) has a shift mode which matches each Hebrew character with its matching English QWERTY character ). Obviously I'd want to use the Dvorak corresponding key rather than the QWERTY one, so I created a Hebrew-Dvorak keyboard with a software called Keyboard Layout Manager (KLM) which creates new keyboard layouts DLLs. It works just fine for the shift key, however, Ctrl-key triggered hot-keys (e.g Ctrl+l in FF) are being matched to the corresponding QWERTY key. I've examined the properly working English-Dvorak layout using KLM and in it's "Ctrl+ pressed" view, there isn't any character that's matched to any key but still I tried to encode the Hebrew Ctrl+ pressed keys to work with their matching Dvorak keys, yet it had no effect.

  Read the article

• Window 7 problem, Explorer.exe, DWM.exe

  - by Nitinzz

  I'm using Window 7 Ultimate. I get a problem with two processes, namely explorer.exe and sometimes dwm.exe. The two processes tend to use cpu between 20-30%. And it only occurs when i play some game on my PC. My PC works perfect until I play some game. And another important observation: They consume no cpu as such but only consumes when I try to refresh my desktop. I mean when I right-click on desktop. It takes seconds for refresh. I have no virus problems. I had already tried following things: Kill explorer.exe and relaunch from task manager. (Problem still persists) Kill dwm.exe, well it relaunches again. (Problem still persists) Log Off and Log On. (Problem still persists) Restart. Problem Solved. (But need an alternative). Can anyone kindly suggest some quick fixes to the problem?

  Read the article

• Why do some devices seemingly need the wifi router to reboot before they can connect?

  - by CreeDorofl

  I've noticed a pattern but I'm not sure if it's a crappy router, crappy wireless device, or maybe everything is working as intended. I can wirelessly connect my office PC to the router's settings page for a day, maybe two, then afterwards I can't anymore until it's reset. Unrelated, but similar, in various places that offer free wifi, my kindle will connect fine most days, but occasionally won't unless the router is reset. After the reset, I connect ok. What's happening behind the scenes that makes a router stop allowing you to connect? Is it something on my end that's changing, or on the router's end?

  Read the article

• Computers "applying computer settings" for a long time on start-up...why?

  - by tombull89

  Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

  Read the article

• bridge to share WiFi internet connection over eth0

  - by rubo77

  In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

  Read the article

• Solaris mounting partitions

  - by Benco

  I'm trying to mount a partition in solaris 10... bash-3.00# mount /dev/dsk/c0t0d0s3 /data mount: /dev/dsk/c0t0d0s3 is already mounted or /data is busy As far as I know c0t0d0s3 isn't already mounted elsewhere, so what's really going on here? From /etc/mnttab : /dev/dsk/c1t0d0s0 / ufs rw,intr,largefiles,logging,xattr,onerror=panic,dev=7800001285811136 /devices /devices devfs dev=4840000 1285811125 ctfs /system/contract ctfs dev=48c0001 1285811125 proc /proc proc dev=4880000 1285811125 mnttab /etc/mnttab mntfs dev=4900001 1285811125 swap /etc/svc/volatile tmpfs xattr,dev=4940001 1285811125 objfs /system/object objfs dev=4980001 1285811125 sharefs /etc/dfs/sharetab sharefs dev=49c0001 1285811125 /usr/lib/libc/libc_hwcap1.so.1 /lib/libc.so.1 lofs dev=780000 1285811131 fd /dev/fd fd rw,dev=4b40001 1285811136 swap /tmp tmpfs xattr,dev=4940002 1285811137 swap /var/run tmpfs xattr,dev=4940003 1285811137 -hosts /net autofs nosuid,indirect,ignore,nobrowse,dev=4c00001 1285811148 auto_home /home autofs indirect,ignore,nobrowse,dev=4c00002 1285811148 cordb:vold(pid530) /vol nfs ignore,noquota,dev=4bc0001 1285811149 I suspect the problem is not related to the mount point, but rather the disk slice I'm trying to mount: bash-3.00# newfs -v /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3: Device busy

  Read the article

• backup software that ignores user rights

  - by Chris

  Hi, As a computer technician I have to reinstall systems allmost daily (when it can't be repaired ;-)) My problem is that I recover user files by hand and a external mounting device. Most of the time it works fine, but also weekly I have systems with passwords and personal files which are often not sucessfull recovered. I know you can change owner, but when people have 30 GB's af data, my backup computer works for ages to change the rights. Can anyone think of software (commercial is no problem) which does the following: * backup user data without having user rights troubles * have a option to choose what to backup (email accounts, documents, etc, etc) even when it's externaly mounted, in short, it reconizes the folder structure) * Works on different OS's like XP, Vista, W7

  Read the article

• How do you configure IIS 7 to use a subdirectory as the default document?

  - by Mark Rogers

  So I have a website running on a discount asp.net account, and I put an asp.net mvc app in a subdirectory. If my url is 'www.website.com' and my app is in directory 'sample', then 'www.website.com/sample' will execute the mvc app. My problem is that I want the app to be shown when you go to 'www.website.com' not just 'www.website.com/sample'. I have access to the IIS Manager, and I'm sure there are many ways to do this. What's the best way to do this?

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• How to make the PC speaker beep from the Windows 7 command prompt?

  - by oKtosiTe

  I'm running some lengthy video encodes using the Handbrake command line interface. After all my encodes are done, I would like to have the PC speaker beep, as I usually turn my large external speakers off. On Linux I would install the "beep" package, but so far I haven't found such a program for Windows 7. Possibly related links: System "Beep" sound does not function in Windows Vista x64 with HD Audio devices (I am indeed using an HD Audio device: the SoundMAX ADI1986A) What’s up with the Beep driver in Windows 7? Edit: The question seems to have morphed into "How to make Windows 7 beep the PC speaker?", for which the answer provided by HarryMC is the most appropriate.

  Read the article

• 2nd/3rd version of wireless network appears

  - by neildeadman

  I replaced an old SpeedTouch ADSL router with a Netgear DG384 that I have and whilst doing so decided to change the wireless password. For this question assume my wireless network SSID is DeddersHome. On my netbook and macbook pro (running Win7) it won't connect to the Internet. When I hover over the tray icon for wireless it says "DeddersHome 2" and "DeddersHome 3" have no internet connection. What are these additional wireless networks? I can't see them in the wireless network list on any wireless device I have. Wired connections and wireless through my iPhone work fine. I saw this before with the SpeedTouch, but it just went away!! I also have one Apple AirPort Express connected to the wireless network which my Xbox is connected to (wired). This all worked before... I am going to remove AirPort to see if it is this causing the problem, but thought I'd ask the question to give it time for an answer whilst I continue to search. Cheers

  Read the article

• Possible to get OpenDNS to dereference Host on VPN?

  - by Scott P

  I recently changed ISPs for my home internet. I am now having some trouble getting back into the corporate network from home over the VPN. I have figured out the OpenDNS is resolving the Hosts on the VPN incorrectly when I am using TCP/IP. When I browse to one of the hosts on corporate network, i.e. \host1, from the file manager this succeeds. However, when I ping the host, i.e. ping host1, the IP address is resolving to the OpenDNS name server instead of the actual Host IP address. Does anyone know how to make this work? On a hunch, I turned off type correction. But, this did not help.

  Read the article

• Booting a GPT USB key on older BIOS laptop

  - by fonix232

  I have an old HP EliteBook 8530p, which does not support booting from GPT USB (GPT HDDs are fine though). Lately I had the wish to have a fast-to-start OS for browsing, smaller web tasks, etc., so I grabbed a ChromeOS build (latest one by ArnoldTheBat), flashed it on an 8GB flash drive, and popped it in. It did not boot, so I dug deeper and discovered that it actually is GPT, and cannot be converted to MBR. As my laptop does not support UEFI booting from USB (there's a really-really beta UEFI support in the BIOS, but as I said, it only supports GPT hard drives, not USB devices), I'm stuck. Is there any way of booting it, say, another flash drive with a specific boot loader/manager (e.g. Plop)?

  Read the article

• Change Linux console screen blanking behavior

  - by quack quixote

  How do I change the screen blanking behavior on Linux virtual terminals? For example, if I switch to a VT from X, login, and leave the system alone for 5 minutes or so, the screen will blank like a screensaver. It comes back with any keypress, like a screensaver. Mostly I just want to change the timeout, but I'm also interested in other settings. If it helps, one of my systems is running Ubuntu 10.04 with the stock graphics drivers. fbset shows the console using the radeondrmfb framebuffer device.

  Read the article

• IBM x260m won't boot from PCI SATA card

  - by syrenity

  Hi. We ghosted our old Windows 2003 drive to a new 1TB one, and connected through new PCI SATA card. The x260m server fails to boot with error 1962: "Boot sector not found." When we connect the drive directly to motherboard, it boots fine, so the problem is probably in getting BIOS to boot from the SATA card. Has anyone encountered and solved such issue? EDIT: We tried disabling the on-board Sata controller (Hostraid/SAS?), but there is no such option - only enable, enhanced and compatible. Tried also to chance boot device priority to all possible choices - no luck. Thanks in advance!

  Read the article

• Cannot install wireless lan service on windows 2012 RTM offline

  - by user1763118

  I'm having trouble installing the wireless lan service offline with a fresh installed windows 2012 server RTM. I tried "install-windowsfeature wireless-networking" in the non-gui mode and using the server manager in the gui mode to enable the wireless lan service, but both of them show a "failure configuring windows updates" message after the installation restarted the system. I checked the event log and I think messages about "The WLAN Autoconfig service depends on the following service: nativewifip. This service might not be installed" are the source of the issue. Google shows it is a service called "native wifi filter", but I cannot find anywhere to install that service. I don't have a Ethernet adapter for that computer, so have to install everything offline before the wifi's working.

  Read the article

• Alt-tab icon list in Gnome and metacity?

  - by Vinh Nguyen

  Can anyone provide a reference or explain how the icons to the alt-tab list is populated? I would like to specify some icons for some programs that do not have icons, e.g. xterm. I'm using Ubuntu 11.04 with Gnome 2 (Ubuntu Classic) and metacity as the window manager. I did see this thread that mentions /usr/share/pixmap/, but if I use cp gnome-terminal.xpm xterm.xpm the icon was not populated in the alt-tab icon list (even after a logout/login). I do see that the icon is populated when I added the xterm command to the Program Menu.

  Read the article

• Where can I configure wireless to be passed on to the Virtualbox guest?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

< Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >