Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 527/792 | < Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >

• How to restrict access to a specific wireless network to only 1 user profile in Windows 7.

  - by Mathlight

  Hi all, I'm using Win7 SP1. I've got multiple users on the laptop that can / must connect to a wireless network, lets call it Wireless1. I've got an second wireless network, (lets call it Wireless2), which I want to limit access to only the admin user of the laptop. Now I can remove Wireless2 in the network manager every time, but i want a more user friendly solution, so that only the admin can connect to Wireless2, and all the other users cannot ( they may see the network, but must enter the password, like all other networks ). Any ideas?

  Read the article

• having 2 ip's on a debian 7 box

  - by David

  I just installed Debian Wheezy on my homeserver. I want to assign 2 ip's to it on the same network interface, 1 static ip (eth0) and 1 dynamic ip (eth0:1). I know it doesn't make much sense but I need it to test something. I edited my /etc/network/interfaces to be like this: auto lo eth0 eth0:1 iface lo inet loopback iface eth0 inet static address 192.168.178.240 network 192.168.178.0 netmask 255.255.255.0 broadcast 192.168.178.255 gateway 192.168.178.1 iface eth0:1 inet dhcp when I bring up eth0:1 (ifup eth0:1) I get the following error (eth0 works fine) Bind socket to interface: No such device Failed to bring up eth0:1. is it even possible to have a dynamic and static ip on the same network adapter?

  Read the article

• Symmetrix gatekeepers on Solaris 10

  - by Milner

  I have some Solaris machines that are connected to EMC Symmetrix for SAN storage. Apparently the Symm has a gatekeeper device that is used with the symmetrix CLI. We don't need the CLI, but I have these gatekeeper devices that constantly fill /var/adm/messages and the like with corrupt label errors. Is there anything I can do (short of deleting the devices on machine start) to get rid of them? Or should I just try to get our SAN guy to get the installer for the CLI? These things are getting annoying, and the devfsadmd daemon keeps rediscovering them on boot.

  Read the article

• Mounting root failed. Dropping into basic maintenance shell

  - by vmsystem

  Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

  Read the article

• Dell Powervault MD3000 - Not sharing Files between servers

  - by Kevin

  I'm a developer who has to set up a Dell Powervault MD3000 due to lack of resources. I have connected the Powervault to 2 Dell 2950 servers via the SAS cables. I performed the setup using Dell's MD Storage Manager software (4 disks, RAID 5 with hot spare). Then I added the disks using Windows 2003 disk management (Basic, not dynamic disk and formatted with NTFS). When I add files to the array from one server, they are not visible on the other server (and vice-versa). Is the error in the windows disk management configuration?

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• LPR command won't recognize CUPS printer

  - by Datapimp23

  I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

  Read the article

• Is there a way to stream wirelessly from a laptop to a TV?

  - by Robsta

  I heard of such a thing like a box or a media player such thing that can connect wirelessly to stream movies from my laptop? Is there such a thing that can do it? How is the latency on it? I have fast internet so that's not an issue, or is there such a box that connects with Bluetooth for better connection? I need these box to also be able to browse the internet because I'd like to stream movies from YouTube. I have heard of a thing called boxee, but is that what I'm looking for? I have windows 7 as my os, with an HDMI out and a GPU with a 555m. My laptop is powerful enough and my internet is 25mbps with a cap of 150GB. All i would really like to know is what this device is called? A media box?

  Read the article

• Virtual PC "The page cannot be displayed" error connecting to iis7.5 site on Win7 host.

  - by stan

  I setup virtual pc with the Windows XP IE6 VHD to test a site on Windows 7 host. I created a loopback adapter connection on the host. I have several sites on IIS 7.5, I'm able to connect to all of them except one. And it's the site I need to test... I get "The page cannot be displayed" error. The site loads fine from the host(Windows 7). I've made sure the permissions match that of the other sites that do load. I've recreated the application in IIS manager. Does anyone know what the problem might be?

  Read the article

• Mounting LVM2 volume with XFS filesystem

  - by Chris

  Unfortunately I'm not able to access the data on my NAS anymore. I can't figure out why this is the case as I haven't changed anything. So I plugged one of the harddisks in my computer to access the data. What I did: kpartx -a /dev/sdc Now I should be able to access /dev/mapper/vg001-lv001 When trying to mount it I get: sudo mount -t xfs /dev/mapper/vg001-lv001 /home/user/mnt mount: /dev/mapper/vg001-lv001: can't read superblock Now I did a parted -l which gave me Modell: Linux device-mapper (linear) (dm) Festplatte /dev/mapper/vg001-lv001: 498GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: loop Number Begin End Size Filesystem Flags 1 0,00B 498GB 498GB xfs Does anybody have a solution how to recover the data?

  Read the article

• Network Role based routing

  - by Steve Butler

  Apologies my networking skills are a tad rusty. I'm looking for a way to setup a system that gives me the ability to setup Role-based access to specific network resources. For example, i have three private subnets for specific groups, users will need access to one one or more subnets. I'd like to have all client machines on the same subnet/vlan, and then use 802.1x to authorize into a router(NAC device/whatever), the router would then see what user had authenticated(huge plus if it could determine AD group), and then allow routing to one or more of the three private subnets based upon their group membership. I've looked at packetFence, and it appears to work by assigning a client to a VLAN, but i'd still need a way to route some users into different back-end networks.

  Read the article

• Rollback driver in Windows via command line

  - by ultrasawblade

  I have a remote system in which I've updated the Nvidia graphics driver, but now RDPDD.dll, which I'm guessing stands for RDP Display Driver, will not load (found this out via Event Viewer). I can use Sysinternal's Psexec to execute commands though. I'm sure something has gone very wrong and the user of this system (a CAD engineer) won't be able to use his system normally. I've tried two remote reboots and that has not resolved the issue. So I would like to use the "Roll Back" option for the Nvidia driver in the device manager. Is there a command-line way of doing this?

  Read the article

• How should I capture Linux kernel panic stack traces?

  - by Alnitak

  What's current best practice to capture full kernel stack traces on a Linux system (RHEL 5.x, kernel 2.6.18) that occasionally panics in a device driver? I'm used to the "old" SunOS way of doing things - crash dumps get written to swap, and on reboot the dump gets retrieved in the local file system. man 8 crash refers to diskdump, but that appears to be unsupported. and/or deprecated. I've played with kdump, but it's unclear whether I can get a stack trace from that. Triggering a panic via Magic SysRq didn't create one. It also seems wasteful to reserve so much memory (128MB) just for a kexec crash recovery kernel.

  Read the article

• Remote access to BIOS?

  - by j-g-faustus

  I have a home server running headless (i.e. without a monitor), using ssh for remote access. This works fine most of the time, but I still need a graphics card and still need to drag out a monitor whenever I have to access BIOS, (re-)install the OS and similar. I know that there are business servers that let you control everything remotely (over Ethernet), including power up and BIOS access. Is this type of functionality available for "prosumer" class hardware? If so, where does it sit - should I look for motherboard support, a PCI-e card or an external device? And does this type of functionality have a name, so I know what to google for?

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Windows Vista - Can't start any program without choosing "Run as administrator"

  - by Dave Forgac

  A friend called me saying that her computer recently said it was applying a Windows update when it was shutting down. Now when logged in as her normal user whenever she tries to run any program from the start menu or from a shortcut on the desktop she gets the following popup: "Windows cannot access the specified device path or file You may not have the appropriate permissions to access the item" If she right-clicks and chooses 'Run as administrator' the program will run. We checked the Windows update history and it said the update was applied successfully and that there are no updates available. Unfortunately I'm in a different city so I don't have physical access to the system to look at it any further. Has anyone had a similar problem or have any suggestions?

  Read the article

• Best method(s) to backup VMs running on HyperV?

  - by Kara Marfia

  We're in the middle of P2V'ing most of the network, so the current backup method is likely the worst - the backup agent is still installed on the guest OSs, and the backup device is dutifully pulling them onto tape, one file at a time. I suspect there's a clever way to script (PowerShell?) a suspend on the VMs, then backup of the .vhd files, and unsuspend the VMs. This seems like it would provide big speed benefits, while losing file-level restore (might be best for things like DCs and app servers). What methods/policies have you hammered out?

  Read the article

• Enabling the Power State Change Beep

  - by digitxp

  I have a Thinkpad T430s. I found on other Thinkpads there's a beep when you plug or unplug the AC cord. While I hear a lot of people say it's annoying it seems like a very useful security feature. However, when I go into the Power Manager the option to beep on plugging/unplugging ("Power State Change Beep") isn't there, even though it's in the help file already. I know it would be easy to rig a software solution to this event, but it would kind of defeat the purpose if it doesn't beep when it's in sleep. Is there a way to get this beep on my laptop?

  Read the article

• Internet Explorer 8 only running as process not application

  - by Lord Peter

  Internet Explorer 8 on XP SP3 starts without browser window. Task manager doesn't show application, but iexplore.exe is listed twice in process window. Process Explorer reports "no visible windows found for this process" when I try to "bring to front" in the iexplore.exe properties dialog. Have reinstalled (twice), full scanned with MBAM/MSSE/SpyBot etc, re-registered ieproxy.dll (another Google-inspired tip!), run without addons (-extoff switch), and still same problem. Recently uninstalled VMWare Player and wondered whether problem related to VM network adapter somehow, but Firefox still works perfectly. This is one of my home machines, not critical, and it is backed up, so I will restore if I have to. But any and all suggestions will be gratefully received. It would be nice to understand what might have happened, and perhaps others may benefit from any knowledge that comes to light.

  Read the article

• Intel SASWT4I SAS/SATA Controller Question

  - by Joe Hopfgartner

  Hey there! I want to assemble a cheap storage sytem based on the Norco RPC-4020 Case. When searching for controllers I found this one: Intel® RAID Controller SASWT4I This is a quote form the Spec Sheet: Scalability. Supports up to 122 physical devices in SAS mode which is ideal for employing JBODs (Just a Bunch Of Disks) or up to 14 devices in RAID 0, 1, 1E/10E mode through direct connect device attachment or through expander backplane support. Does that mean I can attatch 14 SATA drives directly to the controller using SFF-8087 - 4x SATA breakout cables? That would be nice because then I can choose a mainboard that has 6 Onboard SATA and i can connect all 20 bays while only spending 155$ on the controller and like another 100$ on cables. Would that work? And why is it 14 and not 16 when there are 4 Ports? I am really confused about all the breakout/fanout/(edge-)expanding/multiplying/channel stuff...

  Read the article

• Is there an FTP client for Windows 7 with a text-based UI? (not text-prompt based, like ftp.exe)

  - by Alan B

  Is there such as thing as a text-mode FTP client for Windows 7 ? By 'text-mode' I mean one that runs in a CMD.EXE window as opposed to a Windows GUI application. It also needs to be something along the lines of FileZilla, i.e. menu-driven as opposed to command-entry clients like NcFTP or indeed the built-in one. edit: To avoid confusion, what I mean is an application similar to that pictured (ZTreeWin File Manager), which runs from CMD.EXE and uses text characters for its UI, within the CMD.EXE window. The built-in FTP client, and things like NcFTP offer a prompt at which you issue commands. That's not what I'm looking for.

  Read the article

• Can I increase the link speed of the RAS Server on our MS Win2k3 box?

  - by Ducain

  We are running a Win2K3 Server box, and I'm a remote employee that connects via VPN. I've been frustrated for some time by the connection speed over the VPN (the office HQ has a decent speed and I have a biz class connection here), and decided to do some checking today. This morning, I was dialed in and looked at the networking tab of the task manager, and I see that the adapter for the RAS Server (the box has 4 Gigabit adapters) has a speed that seems far too low. The speed for the RAS Server link hovers between 300 - 600 Kbps. The local connection (and others) all say 1 Gbps. Can I set this to a higher speed? Is this information accurate? Thanks for the input.

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• Disable Thunderbird "failed to connect" notifications

  - by The Electric Muffin

  My network manager doesn't start until I log in, so for the first ten seconds or so after I login I have no Internet connection. The problem is that I have Thunderbird set to automatically start on login, so it helpfully tells me it "failed to connect" every time I log in. Also, my Internet connection isn't too reliable, so I sometimes get those messages even when I'm supposedly connected. Is there any way to disable these notifications, while still allowing the ones about new mail? Computer info: Thunderbird 15.0 $ uname -a Linux [HOSTNAME REDACTED] 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Probably irrelevant: NetworkManager Version 0.9.0.1 (nm09 20120407) KDE Platform Version 4.8.4 (4.8.4)

  Read the article

• PC does not recognize XBox 360 controller connected through Play & Charge Kit

  - by Mike Cole

  I wanted to hook up my wireless XBox 360 controller to my PC running windows 7. I'm trying to use the Play & Charge kit since I already had that laying around. I plugged it in and Windows recognize it and installed it. It registers in Device Manager as "Xbox 360 Wireless Controller via Play & Charge Kit". The controller also has the 1st quadrant lit. However, I can't seem to make this work with any games. I installed the "Microsoft Xbox 360 Accessories" kit from MS website, and I run the Accessories Status app and it doesn't recognize that the controller is connected. Does anybody know what I'm doing wrong out there?

  Read the article

< Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >