Search Results

Search found 2516 results on 101 pages for 'gigabit ethernet'.

Page 53/101 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• file corruption on read/write 2.6.32-22-server (happens across many kernels)

  - by Jonathan

  Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

  Read the article

• Newly configured MSSQL2008, TIME_WAIT but no ESTABLISHED?

  - by 3molo

  Windows 2008 R2, standard. No firewall locally on it. Newly setup because an old SQL2000 had two disks die (or could it be the raid controller?) at the same time. Luckily, I had fresh backups. The databases have been restored, and SP2 for SQL2008 applied. I can see various hosts trying to establish a session, but the (customer) sites does not work and I don't see the expected established sessions. A wireshark reveals a full three-way handshake. Since it's customer machines connecting, I cannot logon to them and restart application pools.. What on earth could be causing this? No. Time Source Destination Protocol Info 1 0.000000 1.2.5.127 1.2.6.133 TCP desktop-dna > ms-sql-s [SYN] Seq=0 Win=65535 Len=0 MSS=1380 SACK_PERM=1 Frame 1: 62 bytes on wire (496 bits), 62 bytes captured (496 bits) Ethernet II, Src: Cisco_31:5e:09 (00:26:0b:31:5e:09), Dst: Vmware_b7:00:05 (00:50:56:b7:00:05) Internet Protocol, Src: 1.2.5.127 (1.2.5.127), Dst: 1.2.6.133 (1.2.6.133) Transmission Control Protocol, Src Port: desktop-dna (2763), Dst Port: ms-sql-s (1433), Seq: 0, Len: 0 No. Time Source Destination Protocol Info 2 0.000123 1.2.6.133 1.2.5.127 TCP ms-sql-s > desktop-dna [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 SACK_PERM=1 Frame 2: 62 bytes on wire (496 bits), 62 bytes captured (496 bits) Ethernet II, Src: Vmware_b7:00:05 (00:50:56:b7:00:05), Dst: Cisco_31:5e:09 (00:26:0b:31:5e:09) Internet Protocol, Src: 1.2.6.133 (1.2.6.133), Dst: 1.2.5.127 (1.2.5.127) Transmission Control Protocol, Src Port: ms-sql-s (1433), Dst Port: desktop-dna (2763), Seq: 0, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 3 0.000884 1.2.5.127 1.2.6.133 TCP desktop-dna > ms-sql-s [ACK] Seq=1 Ack=1 Win=65535 Len=0 And netstat TCP 1.2.6.133:1433 1.2.2.98:26895 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26912 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26918 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26931 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2736 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2737 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2738 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2739 TIME_WAIT 0

  Read the article

• No Internet access while being connected to VPN using Cisco VPN Client 5.

  - by szeldon

  Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

  Read the article

• How can I scan from Canon PIXMA MX700 without disabling OS X firewall?

  - by Justin Love

  I have a Canon PIXMA MX700 connected by ethernet. When I first bought it I was using OS X 10.4, and scanner-initiated scanning worked fine. After upgrading to 10.6, neither scanner-initiated or scanning from MP Navigator EX works with the firewall enabled. The firewall lists exceptions for three applications: Canon IJ Network Scan Utility.app Canon IJ Network Scanner Selector.app MP Navigator EX 1.0.app I get no further blocked warnings, and /var/log/appfirewall.log lists nothing for today (my latest attempt to use it).

  Read the article

• no internet connection with windows 7

  - by Tami

  I installed Windows 7 on my laptop; now it cannot connect to the internet on internet explorer, although it indicates that it is connected to my wireless network. Plugging in the ethernet cable doesn't give me a connection either. I am a complete novice and need absolute instructions on how to fix

  Read the article

• FC SAN network high-error rate simulation

  - by Wieslaw Herr

  Is there a way to simulate a malfunctioning device or a faulty cable in a FC SAN network? edit: I know shutting down a port on a switch is an option, I'd like to simulate high error rates though. In an ethernet network it would be a simple case of adding a transparent bridge that discards a given percent of the packets, but I have absolutely no idea how to tackle that in an Fibre Channel environment...

  Read the article

• Is there a way to setup a hotspot with a domain name rather than IP address?

  - by WagnerMatosUK

  Basically I've setup a hotspot and its currently being accessed through an IP address. I'd like to use a hostname instead. This is for internal use only, meaning the ODROID device which is being used to as Access Point is connected to the internet via ethernet and only a few devices will access the AP. My setup details: Arch Linux on an ODROID U3 device, using hostapd and dhcp server. PS: I'm quite inexperienced with network so I might be missing something obvious here. Thanks in advance

  Read the article

• Network switching issues with MacOS 10.7?

  - by Denis

  I'm having a wired problem and hope somebody can tip me, what way should I dig to. I'm using MacBookPro with Lion 10.7.3 both at my working place & at home. At working place, we have a domain-based network with 802.1x authorization (more than 400 computers) and to connect it I'm using Ethernet cable. IP range is 10.10.2.*. All network settings are setup automatically by DHCP. Also, in settings, I have Network Account Server setup in the User&Groups Settings for my work Domain server - and it is available only from corporate network. At home, I have an ADSL router, that shares Internet connection by WiFi in NAT mode. I'm using WiFi to connect it. Router gives out addresses from 192.168.1.* range and all settings are also set up by router's DHCP. So, my problem is the following. When I come back home from the office, I open my MacBook and AirPort automatically connects my WiFi network. After this, for about 1 minute I'm able to browse sites & ping hosts successfully. But after this minute, network connection is broken down. All pings return time-out. trace route to google.com stops on 192.168.1.1 (which is my router). This lasts for 3-4 minutes. After that network connection is automatically repaired and all pings go smoothly again. At the same time, when my MacBook return timeouts, I can successfully ping any host from my wife's MacBook - so this doesn't look like router issue. When I come to the office, I don't have any issues and Internet connection is available & stable moments after ethernet cable plugged in. Do anybody has any clues about this? What should I monitor & what settings look for resolving this issue? Please, ask, what additional information should I provide. Hoping for good advice & thanks in advance!

  Read the article

• WindowsXP with no drivers

  - by user38008

  So I formatted my windows XP and reinstalled it. But forsome reason my drivers disk is for the wrong Dell Model..... So I can't connect to the internet because I think I'm missing the ethernet driver. Am i screwed or can I obtain theses drivers elsewhere....

  Read the article

• default virtual network interface

  - by Zulakis

  I got a single ethernet connection to a network but need multiple ips. Because of this, I am using virtual network interfaces like this: auto intern iface intern inet static address ... netmask ... gateway ...U auto intern:1 iface intern:1 inet static address ... netmask ... gateway ... I need to specify which IP should be used by default for outgoing traffic. How can I do that?

  Read the article

• Sharing an internet connection via crossover capable without changing IP settings

  - by jhioj

  I have a home wireless network and two laptops. My primary laptop is normal, and runs Windows 7. My secondary laptop has no wireless capability, and I have no access to the IP settings on my account. How can I access the internet on my secondary computer through my primary computer using a crossover cable or something similar? In other words, how can I make my primary computer produce a connection that my secondary computer will find indistinguishable from normal ethernet?

  Read the article

• Unable to connect to Linux (Virtual OS-vmware) through Putty on Windows

  - by RBA

  Hi, I want to access my Linux box (Virtual OS) through Putty on Windows using Run command: putty -ssh -P 22 192.168.171.130,,, but it is returning an error message, not able to connect. But few days back I was able to connect it today. But not now. Why?? Windows IP Configuration Host Name . . . . . . . . . . . . : rba7791fd466 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.234.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card Physical Address. . . . . . . . . : 00-24-2B-60-A0-88 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.0.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.0.1 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Lease Obtained. . . . . . . . . . : Friday, August 28, 2009 4:11:09 AM Lease Expires . . . . . . . . . . : Saturday, August 29, 2009 4:11:09 AM Ubuntu Configuration eth0 inet addr:192.168.171.130

  Read the article

• Install anonymous proxy on Ubuntu

  - by jack

  How to install an anonymous proxy in Ubuntu 9.10 server which listens on every public network ethernet interfaces? I have other service like Nginx, MySQL running on that server so I hope the proxy server wont conflict with them.

  Read the article

• arp "who-has tell" on cloned machine

  - by mcmorry

  I have a urgent problem to solve today, but I'm lost. Please help. I've cloned a Virtual Machine hosted on VM Ware ESXi 4.1 The OS is now Ubuntu Server 12.04 LTS, but at the time of cloning it was 10.04 LTS. I fixed the MAC address manually inside /etc/udev/rules.d/70-persistent-net.rules. It is a known problem on Ubuntu. I had to remove the old MAC address and set the new one as eth0. Everything seems to work fine, except ARP. My provider OVH sent me a warning to resolve it today (this is the second day) or they will block my IP! The log contains many lines like this: Tue Jun 5 01:04:29 2012 : arp who-has 178.32.136.212 tell 178.32.136.224 where .224 is the cloned server that is causing problems, and .212 is the cloned one. arp -na returns: ? (178.33.230.254) at 00:07:b4:00:00:02 [ether] on eth0 ? (178.32.136.212) at 00:50:56:09:8e:f1 [ether] on eth0 The first IP is the ESXi machine. The second one should not be there. I'm not an expert and I don't know what else to do to fix this problem. Any help will be very appreciated. Thanks. EDIT: ifcofig on .224: eth0 Link encap:Ethernet HWaddr 00:50:56:01:32:c6 inet addr:178.32.136.224 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe01:32c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:399924 errors:0 dropped:465 overruns:0 frame:0 TX packets:241884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58006071 (58.0 MB) TX bytes:663603166 (663.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:516216 errors:0 dropped:0 overruns:0 frame:0 TX packets:516216 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:236284275 (236.2 MB) TX bytes:236284275 (236.2 MB) ifconfig on .212: eth0 Link encap:Ethernet HWaddr 00:50:56:09:8e:f1 inet addr:178.32.136.212 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe09:8ef1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16014 errors:0 dropped:0 overruns:0 frame:0 TX packets:14511 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15134444 (15.1 MB) TX bytes:2683025 (2.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9944 errors:0 dropped:0 overruns:0 frame:0 TX packets:9944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1139347 (1.1 MB) TX bytes:1139347 (1.1 MB)

  Read the article

• Share internet connection from workstation to server?

  - by letseatfood

  Is it possible for me to share my internet connection from a Vista OS Laptop to a Linux server desktop, and still connect to the server from the laptop? The server box does not have a wireless card and I am trying to avoid tripping people with my Ethernet. Also, the laptop connects via wireless.

  Read the article

• Cant see my wireless internal card on BackTrack 5

  - by Tomer

  I have BackTrack 5 R3 installed on VMware and its on bridged connection so it gets its own ip on my network and it works I get internet connection but there is no ethernet cable connected yet somehow when I do iwconfig I cant see wlan0 and no other wireless card but etho is connected to the network somehow.... cant it be that eth0 is my wireless card which somehow misconfigured? Its an intel centrino advanced n 6205

  Read the article

• How to transfer files from windows 7 pc to vista

  - by Samuel C

  Tried using direct connection using Ethernet cable and using windows easy transfer, but no luck, also tried using ad-hoc, home group, and connecting through a router both wired and wireless but no luck, im getting a little frustrated as I need to transfer these files because im selling one of them this afternoon! All I need to do is transfer some documents and files. The windows 7 pc recognizes the vista pc but vista cant recognize the win 7.

  Read the article

• Can't ping Ip over bridge

  - by tmn29a

  I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet 172.30.xxx.xxx to be used for KVM-Guests. ifconfig : bond0 Link encap:Ethernet HWaddr e4:11:5b:d4:94:30 inet addr:10.54.2.84 Bcast:10.54.2.127 Mask:255.255.255.192 inet6 addr: fe80::e611:5bff:fed4:9430/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:34277 errors:0 dropped:0 overruns:0 frame:0 TX packets:18379 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2638709 (2.5 MiB) TX bytes:2887894 (2.7 MiB) br0 Link encap:Ethernet HWaddr f2:fc:4d:7f:15:f0 inet addr:172.30.254.66 Bcast:172.30.254.127 Mask:255.255.255.192 inet6 addr: fe80::f0fc:4dff:fe7f:15f0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:252 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:10800 (10.5 KiB) Pings : ping -I br0 172.30.xxx.65 PING 172.30.xxx.65 (172.30.xxx.65) from 172.30.xxx.66 br0: 56(84) bytes of data. --- 172.30.xxx.65 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2017ms ping -I bond0 172.30.254.65 PING 172.30.xxx.65 (172.30.xxx.65) from 10.54.2.84 bond0: 56(84) bytes of data. 64 bytes from 172.30.x.65: icmp_req=1 ttl=64 time=0.599 ms 64 bytes from 172.30.x.65: icmp_req=2 ttl=64 time=0.575 ms 64 bytes from 172.30.x.65: icmp_req=3 ttl=64 time=0.565 ms --- 172.30.x.65 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.565/0.579/0.599/0.031 ms Route : Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.x.64 * 255.255.255.192 U 0 0 0 br0 10.54.x.64 * 255.255.255.192 U 0 0 0 bond0 default 10.54.x.65 0.0.0.0 UG 0 0 0 bond0 default 172.30.x.65 0.0.0.0 UG 0 0 0 br0 The Interface : cat /etc/network/interfaces auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.54.x.84 netmask 255.255.255.192 network 10.54.x.64 gateway 10.54.x.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports bond0 address 172.30.x.66 broadcast 172.30.x.127 netmask 255.255.x.192 gateway 172.30.x.65 bridge_maxwait 0 If you need more info please ask. Thanks for your help !

  Read the article

• PPPoA Half Bridge Modems

  - by petebob796

  I am looking for a simple ADSL ethernet modem to plug into a DIR-825 router. Anyone know of one, it's for a PPPoA connection so I believe I need something capable of half bridge/zipb.

  Read the article

• BASH - Run command for each line in output of previous command

  - by user1582375

  All, I am want to request all network services using: networksetup -listallnetworkservices I then want to run the below command for each line in produced from the above command: networksetup -setautoproxyurl "A LINE FROM ABOVE" http://etc... Adiitonally, I only want to issue the setautoproxyurl command for service with "Ethernet" or "Wi-Fi" in the name networksetup -listallnetworkservices | while read line; do networksetup -setautoproxy $line http://etc...

  Read the article

• Inbound connections to a ubuntu machine running a VPN

  - by shanedowling

  Is it possible to open inbound connections to a machine connected to a VPN server? The machine is running ubuntu 9.10 with two network devices(a wireless card and ethernet port), I can connect to my machine locally using a local ip but when I try port forward using my router I can't connect from my external ip. Is there a way around this? I figure with 2 network devices I can vpn over one and use the other for inbound connections but I can't figure out how to do this. Thanks

  Read the article

• What is this port/connector on my laptop?

  - by iconiK

  I have this port on my laptop and I have no idea what is it used for. It's not even listen in the laptop technical specifications. The laptop is a HP Pavillion dv5-1101en. Here is a larger image showing all the ports on the laptop: Left to right: D-sub 15 pin (AKA VGA) Unknown port Ethernet HDMI eSATA USB IEEE 1394 (AKA FireWire)

  Read the article

• Local Only 3G Router via Broadband Device?

  - by GateKiller

  I am looking for the name/type of device which does the following: Connects to the internet via ethernet or wireless and then produces a "fake" 3G signal for my iPhone to connect to. The 3G siginal in my office is very weak or non-existant and I need a way of boosting or replacing it.

  Read the article

• How do I get a bridge network to work for VirtualBox with Linux guest on a Mac OS X host.

  - by clutch

  Does anybody have the step by step configuration process that would allow VirtualBox running a Linux/Ubuntu guest on a Mac OS X host use the bridge type network using Ethernet and wireless? I have read that it does work and it doesn't work, trying to find a definite answer. I want the guest environment to look like a separate box. Thanks

  Read the article

• WLAN adapter on Ubuntu Server inside Hyper-V

  - by Firefox333

  I need to set up an Ubuntu server as a router. However we need to make it wireless and wired. I need a WLAN adapter for the wireless part of the router. I get my Internet connection on my server through my wireless adapter from my host but it automatically sees it as an Ethernet adapter instead of as a wireless adapter. Is there any way of making a (virtual) wireless adapter on Ubuntu server 12.04 inside a hyper-v machine?

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >