Search Results

Search found 29064 results on 1163 pages for 'network management'.

Page 532/1163 | < Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >

  • Wireless networking on Gnome on Ubuntu 9 / 10

    - by WaveyDavey
    So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

    Read the article

  • Virtualization in Solaris 11 Express

    - by lynn.rohrer(at)oracle.com
    In Oracle Solaris 10 we introduced Oracle Solaris Containers -- lightweight virtual application environments that allow you to consolidate your Oracle Solaris applications onto a single Oracle Solaris server and make the most of your system resources.The majority of our customers are now using Oracle Solaris Containers on their enterprise systems for applications ranging from web servers to Oracle Database installations. We can also make these Containers highly available with Oracle Solaris Cluster, the industry's first virtualization-aware enterprise cluster product. Using Oracle Solaris Cluster you can failover applications in a Container to another Container on a single system or across systems for additional availability.We've added significant features in Oracle Solaris 11 Express to improve and extend the Oracle Solaris Zone model:Integration of Zones with our new Solaris 11 packaging system (aka Image Packaging System) to provide easy software updates within a zoneSupport for Oracle Solaris 10 Zones to run your Solaris 10 applications unaltered on an Oracle Solaris 11 Express systemIntegration with the new Oracle Solaris 11 network stack architecture (more on this in a future blog post)Improved observability with the zonestat management interface and commandsDelegated administration rights for owners of individual non-global zonesTight integration with Oracle Solaris ZFS to allow dedicated datasets per zoneWith ZFS as the default file system we can now provide easy to manage Boot Environments for zonesThis quick summary is just to whet your appetite to learn more about Oracle Solaris 11 Express Zones enhancements. Fortunately we can serve a full meal at the Oracle Solaris 11 Express Technology Spotlight on Virtualization page on the Oracle Technical Network.

    Read the article

  • how to connect only ethernet and only wireless hosts together

    - by Ashok Das
    Here is my problem. I have an android tablet that have only WiFi for network connectivity and I have a windows server that have only Ethernet ports for network connection. Now I want to telnet to my server from my tablet. I think some wireless to Ethernet converter required in between. I am planning to use Buffalo Air Station WCR-GN or TP-LINK TL-WR740N or TL-WR702N. The connection setup should be like this: [server]<---Ethernet---[WIFI router]<---wireless---[Tablet]. Now I am in doubt will this setup work? Anybody please help me with this. Regards Ashok

    Read the article

  • A list of game mechanics

    - by Iain
    I'm trying to compile a list of game mechanics, by which I mean high-level/meta game mechanics like Cooperation, Resource Management, Chance and Time Manipulation rather than low level mechanics like running, jumping climbing ladders, etc Does any one have any suggestions or can point me to good existing lists? My WIP list is already proving to be quite useful to me in the way I think about games.

    Read the article

  • Silverlight Cream for April 24, 2010 -- #846

    - by Dave Campbell
    In this Issue: Michael Washington, Timmy Kokke, Pete Brown, Paul Yanez, Emil Stoychev, Jeremy Likness, and Pavan Podila. Shoutouts: If you've got some time to spend, the User Experience Kit is packed with info: User Experience Kit, and just plain fun to navigate ... thanks Scott Barnes for reminding me about it! Jesse Liberty is looking for some help organizing and cataloging posts for a new project he's got going: Help Wanted Emil Stoychev posted Slides and demos from my talk on Silverlight 4 From SilverlightCream.com: Silverlight 4 Drag and Drop File Manager Michael Washington has a post up about a Silverlight Drag and Drop File Manager in MVVM, but a secondary important point about the post is that he and Alan Beasley followed strict Designer/Developer rules on this... you recognized Alan's ListBox didn't you? Changing CSS with jQuery syntax in Silverlight using jLight Timmy Kokke is using jLight as introduced in a prior post to interact with the DOM from Silverlight. Essential Silverlight and WPF Skills: The UI Thread, Dispatchers, Background Workers and Async Network Programming Pete Brown has a great backrounder up for WPF and Silverlight devs on threading and networking, good comments too so far. Fluid layout and Fullscreen in Silverlight Paul Yanez has a quick post and demo up on forcing full-screen with a fluid layout, all code included -- and it doesn't take much Data Binding in Silverlight Emil Stoychev has a great long tutorial up on DataBinding in Silverlight ... he hits all the major points with text, samples, and code... definitely one to read! Yet Another MVVM Locator Pattern Another not-necessarily Silverlight post from Jeremy Likness -- but definitely a good one on MVVM and locator patterns. The SpiderWebControl for Silverlight Pavan Podila has a 'SpiderWebControl' for Silverlight 4 up... this is a great network graph control with any sort of feature I can think of... check out the demo, then grab the code... or the other way around, your choice :) Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Need help with DNS. Registrar is NS, Web Site at WinHost, Email at eHost

    - by Leon
    Need help moving a web site for a client, which I will call ClientABC. The web site is ClientABC.com, which is hosted at Rackspace, with their email hosted at eHost. We are transferring the site from Rackspace to WinHost and are keeping the email hosted at eHost. I would like the transfer to happen with little to no down time for the web site and email (email is most important). Current Config: Client owns domain and registrar is Network Solutions Domain name is managed by VendorX at Rackspace Web site is hosted on Rackspace servers Email is hosted at eHost Post-Move Config: Web site is hosted at WinHost Keep Email at eHost Here is my plan for the transfer: Copy the site files to WinHost and test to assure site is fully functional Set up the MX record in the WinHost account to point to eHost servers Change the DNS in Network Solutions from Rackspace to Winhost Questions: Will this work? What am I missing? Should I expect down time or any issues with email? I understand that there will be a period of time that traffic to the site is handled at both Rackspace and Winhost and that email traffic will be routed through both hosts as well. Will this cause issues? How will I know when the change is fully propagated and that Rackspace is out of the equation and WinHost is handling everything (so I can kill the Rackspace account) Thanks in advance!

    Read the article

  • TSAM 11gR1

    - by todd.little
    The Tuxedo System and Application Monitor (TSAM) 11gR1 release provides powerful new application monitoring capabilities, as well as significant improvements in ease of use. The first thing users will notice is the completely redesigned user interface in the TSAM console. Based on Oracle ADF, the console is much easier to navigate, provides a Web 2.0 style interface with dynamically updating panels, and a look and feel familiar to those that have used Oracle Enterprise Manager. Monitoring data can be viewed in both tabular and graphical form and exported to Excel for further analysis. A number of new metrics are collected and displayed in this release. Call path monitoring now displays CPU time, message size, total transport time, and client address giving even more end-to-end information about a specific Tuxedo request. As well the call path display has been completely revamped to make it much easier to see the branches of the call path. The call pattern display now provides statistics on successful vs failed calls, system and application failures, and end-to-end average elapsed time. Service monitoring now displays minimum and maximum message size, CPU usage, and client address. System server monitoring now includes monitoring the SALT gateway servers to provide detailed performance metrics about those servers. Perhaps the most significant new feature is the consolidation of alert definitions and policy management. In previous versions of TSAM, some alerts were defined and checked on the monitored systems while others were defined and checked in the console. Policy management could be performed on both the monitored node via environment variable or command, as well as from the console. Now all alert definitions and policy definitions are only made using the console. For alerts this means that regardless of where the alert is evaluated it is defined in one and only one place. Thus the plug-in alert mechanism of previous releases can now be managed using the TSAM console, making SLA alert definition much easier and cleaner. Finally there is support in TSAM for monitoring rehosted mainframe applications. The newly announced Oracle Tuxedo Application Runtime for CICS and Batch can be monitored in the TSAM console using traditional mainframe views of the application such as regions. Look for a future blog entry with more details on this as well as some entries providing a glimpse of the console. TSAM gives users a single point for monitoring the performance of all of their Tuxedo applications.

    Read the article

  • World Record Performance on PeopleSoft Enterprise Financials Benchmark on SPARC T4-2

    - by Brian
    Oracle's SPARC T4-2 server achieved World Record performance on Oracle's PeopleSoft Enterprise Financials 9.1 executing 20 Million Journals lines in 8.92 minutes on Oracle Database 11g Release 2 running on Oracle Solaris 11. This is the first result published on this version of the benchmark. The SPARC T4-2 server was able to process 20 million general ledger journal edit and post batch jobs in 8.92 minutes on this benchmark that reflects a large customer environment that utilizes a back-end database of nearly 500 GB. This benchmark demonstrates that the SPARC T4-2 server with PeopleSoft Financials 9.1 can easily process 100 million journal lines in less than 1 hour. The SPARC T4-2 server delivered more than 146 MB/sec of IO throughput with Oracle Database 11g running on Oracle Solaris 11. Performance Landscape Results are presented for PeopleSoft Financials Benchmark 9.1. Results obtained with PeopleSoft Financials Benchmark 9.1 are not comparable to the the previous version of the benchmark, PeopleSoft Financials Benchmark 9.0, due to significant change in data model and supports only batch. PeopleSoft Financials Benchmark, Version 9.1 Solution Under Test Batch (min) SPARC T4-2 (2 x SPARC T4, 2.85 GHz) 8.92 Results from PeopleSoft Financials Benchmark 9.0. PeopleSoft Financials Benchmark, Version 9.0 Solution Under Test Batch (min) Batch with Online (min) SPARC Enterprise M4000 (Web/App) SPARC Enterprise M5000 (DB) 33.09 34.72 SPARC T3-1 (Web/App) SPARC Enterprise M5000 (DB) 35.82 37.01 Configuration Summary Hardware Configuration: 1 x SPARC T4-2 server 2 x SPARC T4 processors, 2.85 GHz 128 GB memory Storage Configuration: 1 x Sun Storage F5100 Flash Array (for database and redo logs) 2 x Sun Storage 2540-M2 arrays and 2 x Sun Storage 2501-M2 arrays (for backup) Software Configuration: Oracle Solaris 11 11/11 SRU 7.5 Oracle Database 11g Release 2 (11.2.0.3) PeopleSoft Financials 9.1 Feature Pack 2 PeopleSoft Supply Chain Management 9.1 Feature Pack 2 PeopleSoft PeopleTools 8.52 latest patch - 8.52.03 Oracle WebLogic Server 10.3.5 Java Platform, Standard Edition Development Kit 6 Update 32 Benchmark Description The PeopleSoft Enterprise Financials 9.1 benchmark emulates a large enterprise that processes and validates a large number of financial journal transactions before posting the journal entry to the ledger. The validation process certifies that the journal entries are accurate, ensuring that ChartFields values are valid, debits and credits equal out, and inter/intra-units are balanced. Once validated, the entries are processed, ensuring that each journal line posts to the correct target ledger, and then changes the journal status to posted. In this benchmark, the Journal Edit & Post is set up to edit and post both Inter-Unit and Regular multi-currency journals. The benchmark processes 20 million journal lines using AppEngine for edits and Cobol for post processes. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN PeopleSoft Financial Management oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 1 October 2012.

    Read the article

  • NIC interface names in /proc/interrupts

    - by Gallus
    When I look at /proc/interrupts: $ cat /proc/interrupts CPU0 CPU1 (...) 12: 4 0 IO-APIC-edge i8042 14: 145 65310875 IO-APIC-edge ide0 50: 0 0 IO-APIC-level uhci_hcd:usb5, Intel ICH7 58: 5388 7983508 IO-APIC-level libata 169: 812427252 1236572641 IO-APIC-level skge, eth1 217: 6 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 225: 0 0 IO-APIC-level uhci_hcd:usb3 233: 60 3108720778 IO-APIC-level uhci_hcd:usb4, skge I can see two skge and one eth1 entries. All of them are the network cards. Because of the general name "skge" (which is the name of the network driver of the card) I can't easily reocognize, which NIC occupies which interrupt. How to make linux use more descriptive names in the entries? Or: Is there any alternative way to obtain INT information instead of /proc/interrupt? My final goal is to manipulate smp_affinities of the NICs.

    Read the article

  • Bridging VirtualBox over OpenVPN TAP adapter on Windows

    - by Sean Edwards
    I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

    Read the article

  • How can I track down what part of pfsense is blocking website access?

    - by Chase Florell
    I've got a PFSense firewall/gateway on our network. Everything works great except for the fact that I cannot access one specific website. Pfsense is running the following packages Country Block LightSquid nmap notes squid squidGuard Strikeback I can access every single website I've ever tried aside from one that we need for business use (http://bridalnetwork.ca) here's the traceroute frodo:~ chase$ traceroute bridalnetwork.ca traceroute to bridalnetwork.ca (192.197.103.73), 64 hops max, 52 byte packets 1 rohan (192.168.5.1) 6.618 ms 1.662 ms 9.207 ms 2 * * * 3 * * rohan (192.168.5.1) 7.225 ms !H 4 rohan (192.168.5.1) 5.314 ms !H 5.701 ms !H 7.573 ms !H frodo:~ chase$ How can I figure out what the reason behind the blockage is? note: this has been tested on every computer on the network with the same results. ps: the pfsense box is 'rohan' (192.168.5.1) Here's what I get with Squid enabled and here's what I get with Squid disabled

    Read the article

  • Looking for Inneroffice Access Tool, Workstation to Workstation

    - by nicorellius
    This may be a simple question to answer, and I apologize if it's a duplicate. I looked through the suggestions and nothing jumped out at me as the right answer, so here goes: My office has several workstations, Macs and Windows boxes. We do have a firewall and a VPN solution, so getting in to the network from outside is easy. Likewise, we use GoToMeeting for demos and when we help our customers with their issues. But we have one workstation that has certain testing tools on it, and instead of walking across the office to this machine, I'd like to access it from my desk (and monitor it). I will need to open a command line and run commands. I could start a GoToMeeting and do it this way, but that seems overkill and clunky. Is there a simpler tool that allows pseudo-remote access within the same office/network for this kind of access?

    Read the article

  • Digital Storage for Airline Entertainment

    - by Bill Evjen
    by Thomas Coughlin Common flash memory cards The most common flash memory products currently in use are SD cards and derivative products (e.g. mini and micro-SD cards) Some compact flash used for professional applications (such as DSLR cameras) Evolution of leading flash formats Standardization –> market expansion Market expansion –> volume iNAND –> focus is on enabling embedded X3 iSSD –> ideal for thin form factor devices Flash memory applications Phones are the #1 user of flash memory Flash memory is used as embedded and removable storage in many mobile applications Flash memory is being used in computers as USB sticks and SSDs Possible use of flash memory in computer combined with HDDs (hybrid HDDs and paired or dual storage computers) It can be a removable card or an embedded card These devices can only handle a specific number of writes Flash memory reads considerably quicker than hard drives Hybrid and dual storage in computers SSDs can provide fast performance but they are expensive HDDs can provide cheap storage but they are relatively slow Combining some flash memory with a HDD can provide costs close to those of HDDs and performance close to flash memory Seagate Momentus XT hybrid HDD Various dual storage offerings putting flash memory with HDDs Other common flash memory devices USB sticks All forms and colors Used for moving files around Some sold with content on them (Sony Movies on USB sticks) Solid State Drives (SSDs) Floating Gate Flash Memory Cell When a bit is programmed, electrons are stored upon the floating gate This has the effect of offsetting the charge on the control gate of the transistor If there is no charge upon the floating gate, then the control gate’s charge determines whether or not a current flows through the channel A strong charge on the control gate assumes that no current flows. A weak charge will allow a strong current to flow through. Similar to HDDs, flash memory must provide: Bit error correction Bad block management NAND and NOR memories are treated differently when it comes to managing wear In many NOR-based systems no management is used at all, since the NOR is simply used to store code, and data is stored in other devices. In this case, it would take a near-infinite amount of time for wear to become an issue since the only time the chip would see an erase/write cycle is when the code in the system is being upgraded, which rarely if ever happens over the life of a typical system. NAND is usually found in very different application than is NOR Flash memory wears out This is expected to get worse over time Retention: Disappearing data Bits fade away Retention decreases with increasing read/writes Bits may change when adjacent bits are read Time and traffic are concerns Controllers typically groom read disturb errors Like DRAM refresh Increases erase/write frequency Application characteristics Music – reads high / writes very low Video – r high / writes very low Internet Cache – r high / writes low On airplanes Many consumers now have their own content viewing devices – do they need the airlines? Is there a way to offer more to consumers, especially with their own viewers Additional special content tie into airplane network access to electrical power, internet Should there be fixed embedded or removable storage for on-board airline entertainment? Is there a way to leverage personal and airline viewers and content in new and entertaining ways?

    Read the article

  • Using airport extreme base station as a wireless G to wireless N bridge

    - by micmcg
    Due to unfortunate placement of various wall outlets in my new apartment, my adsl 2 modem + router is not able to be placed next to my airport extreme base station (AEBS). I'd prefer not to run cat5 cable between them, but I still want to use the wireless N on the AEBS, because it will have a high speed NAS plugged in via gigabit ethernet so I want to maximise the wireless transfer speed to my 27" iMac. Is it possible to use one of the radios in the airport extreme to bridge the wireless G network with the router, and the wireless N radio to broadcast normally? The only traffic going over the G network should be internet (24mbps ADSL2) so it should never get saturated. Thanks

    Read the article

  • BUILD 2013 Session&ndash;Testing Your C# Base Windows Store Apps

    - by Tim Murphy
    Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/build-2013-sessionndashtesting-your-c-base-windows-store-apps.aspx Testing an application is not what most people consider fun and the number of situation that need to be tested seems to grow exponentially when building mobile apps.  That is why I found the topic of this session interesting.  When I found out that the speaker, Francis Cheung, was from the Patterns and Practices group I knew I was in the right place.  I have admired that team since I first met Ron Jacobs around 2001.  So what did Francis have to offer? He started off in a rather confusing who’s on first fashion.  It seems that one of his tester was originally supposed to give the talk, but then it was decided that it would be better to have someone who does development present a testing topic.  This didn’t hinder the content of the talk in the least.  He broke the process down in a logical manner that would be straight forward to understand if not implement. Francis hit the main areas we usually think of such as tombstoning, network connectivity and asynchronous code, but he approached them with tools they we may not have thought of until now.  He relied heavily on Fiddler to intercept and change the behavior of network requests. Then there are the areas you might not normal think to check.  This includes localization, accessibility and updating client code to a new version.  These are important aspects of your app that can severely impact how customers feel about your app.  Take the time to view this session and get a new appreciation for testing and where it fits in your development lifecycle. del.icio.us Tags: BUILD 2013,Testing,C#,Windows Store Apps,Fiddler

    Read the article

  • How to create Isolated test environment

    - by Safin09
    Hi All, I am very new to the VMware world. We have VMWare vCenter 4 in the production environment but we have created multiple VLAN through Cisco Switch. I want know, how I can create an isolated test environment for software testing purpose only, so anything will happen in that test vLan will not make trouble in the production environment. "Host-only networking" is the solution or there is a better way to achieve this result? My requirements A. Hosts should be able to access Internet and a Network Share drive but not Production network B. Hosts should connect each other inside the Virtual LAN C. I should be able to take automatic or periodic backup or snapshoot and deploy snapshot when necessary. Whatever your answer is, please give me steps, how to do, if possible. If I need to purchase anything, I am ready to do but I don't want to spend big money. Many thanks in advance.

    Read the article

  • Windows 2008 and Truecrypt: can't access shared folder called "media"

    - by Sajee
    On my Windows 2008 system, I've attached an external USB drive that's encrypted using Truecrypt. Once I mounted the Truecrypt drive, I share some of the directories from that drive using Windows file sharing. I tried sharing a folder called "media" and when I try to access that folder from a Vista client on my LAN via \myserver\media, I get this error: \myserver\media is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. An unexpected network error occurred. If I share the folder media under some name such as fizzbuzz then I can access \myserver\fizzbuzz w/o any errors. Any clues as to why this is happening? Related: http://serverfault.com/questions/27684/windows-2008-and-truecrypt-how-to-automatically-mount-shared-folders-after-rest

    Read the article

  • ADF Mobile Client is now Generally Available!

    - by joe.huang
    ADF Mobile Client is now generally available!  The press release went out this morning, and the ADF Mobile Client extensions can now be downloaded in the JDeveloper Update Center.  There is also a new Oracle Mobile Computing Strategy White Paper and Data Sheet available, for a high level overview of ADF Mobile. To get started with ADF Mobile Client development, please leverage the following resources: Oracle Technology Network ADF Mobile Landing Page: Review this page for all available resources for ADF Mobile development. Getting Start with ADF Mobile Client Demo: Short demo of the end-to-end development process. Tutorial for Mobile Application Development using ADF Mobile Client ADF Mobile Client Developer Guide ADF Mobile Client Samples: available in the JDeveloper Extension itself.  Located in <JDeveloper Install Location>/jdev/extensions/oracle.adfnmc.core/Samples directory.  Blogs will follow, describing each of the sample applications in more detail. Oracle Database Mobile Server: If database synchronization is needed, please follow this link to download/install Mobile Server. Leverage JDeveloper Forum for any ADF Mobile related questions. You will need the latest (11g Patch Set 3, or 11.1.1.4.0) version of JDeveloper to use this extension.  To download the ADF Mobile Client extension in JDeveloper, you would go to Help Menu, select “Check For Update”, and look for ADF Mobile Client extension in the Official Oracle Extensions and Updates center.  You can also directly download the extension from Oracle Technology Network. Check it out!  For any issues with accessing any of the links above, please contact me directly. Thanks, Joe Huang ([email protected])

    Read the article

  • How can I prevent OpenVPN from clobbering local route?

    - by ataylor
    I have a local network on 192.168.1.0 with netmask 255.255.255.0. When I connect to a VPN though OpenVPN (as a client), it pushes a route for 192.168.1.0 that clobbers the existing one, making my local network inaccessible. I don't to access anything on 192.168.1.0 on the remote machine; I'd like to just ignore it, while accepting the other routes that are pushed. My client is Ubuntu 10.10. How can I skip the one offending route?

    Read the article

  • Go Big or Go Home

    - by Justin Kestelyn
    The Oracle Develop conference (#oracledevelop10), being co-located for the first time ever with JavaOne in San Francisco, is guaranteed to be the ultimate rush for developers this year. Where else can you go to learn about, interact with, and meet fellow devotees of the entire Oracle Development stack (welcome, Oracle Solaris)? This will also be the first time that the community space traditionally located at Oracle OpenWorld - and hosted by Oracle Technology Network, as always - will be present at the "developer" conference during this busy week. So, Oracle OpenWorld's loss is Oracle Develop's gain. And what a community space it will be: nearly 4,000 square feet for meeting space, contests and give-aways, consumption of various beverages, special speakers (Oracle ACEs among them, no doubt), and video-casting. The entire Oracle Technology Network crew will be on hand to "facilitate" your experience, of course. Even better, you can rub shoulders and share war stories with attendees from that "other" conference, JavaOne. (You have access to both conferences as a single package, so you may be having a conversation with yourself.) We call the whole enchilada "The Zone". As time goes on, we'll bring you more news about the activities described above, as well as OTN Night (which proves to be more raucous than ever), technical sessions and keynotes not to be missed, the unconference/open sessions, things to do at night, and more. In the meantime, stay in touch with us via Twitter or Oracle Mix.

    Read the article

  • Port forwarding problem

    - by Steve
    I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

    Read the article

  • Enhancing, Employing, Engaging SharePoint 2010

    - by Sahil Malik
    SharePoint 2010 Training: more information Recently I completed a recording for the Microsoft Partner Learning Center (PLC) on three topics.The videos are now available for your viewing pleasure, I hope you find them useful.   Enhancing SharePoint 2010 – The development story The various ways to deliver functionality in SharePoint with most of the focus surrounding Visual Studio 2010, and SharePoint Designer 2010 where necessary. Watch Video (https://training.partner.microsoft.com/learning/app/management/LMS_ActDetails.aspx?UserMode=0&ActivityId=732988) Read full article ....

    Read the article

  • July, the 31 Days of SQL Server DMO’s – Day 24 (sys.dm_db_index_operational_stats)

    - by Tamarick Hill
    The sys.dm_db_index_operational_stats Dynamic Management Function returns information about the IO, locking, and access methods for the indexes that you currently have on your SQL Server Instance. This function takes four input parameters which are (1) database_id, (2) object_id, (3) index_id, and (4) partition_number. Let’s have a look at the results from this function against our AdventureWorks2012 database. This function returns a ton of columns, so not only will I not attempt to describe each of the columns, I wont even attempt to display all of them here. My query below will give you a subset of the columns returned from this function. SELECT database_id, object_id, index_id, partition_number, leaf_insert_count, leaf_delete_count, leaf_update_count, leaf_ghost_count, nonleaf_insert_count, nonleaf_delete_count, nonleaf_update_count, range_scan_count, forwarded_fetch_count, row_lock_count, row_lock_wait_count, page_lock_count, page_lock_wait_count, Index_lock_promotion_attempt_count, index_lock_promotion_count, page_compression_attempt_count, page_compression_success_count FROM sys.dm_db_index_operational_stats(db_id('AdventureWorks2012'), NULL, NULL, NULL) The first four columns in the result set represent the values that we passed in as our input parameters. If you use NULL’s as I did, then you will see results for every index on your system. I specified a database_id so my result set only shows those records pertaining to my AdventureWorks2012 database. The next columns in the result set provide you with information on how may inserts, deletes, or updates that have taken place on your leaf and nonleaf index levels. The nonleaf levels would refer to the intermediate and root index levels. In the middle of these you see a leaf_ghost_count column, which represents the number of records that have been logically deleted and marked as “ghosted”  and are waiting on the background ghost cleanup process to physically remove them. The range_scan_count column represents the number of range or table scans that have been performed against an index. The forwarded_fetch_count column represents the number of rows that were returned from a forwarding row pointer. The row_lock_count and row_lock_wait_count represent the number of row locks that have been requested for an index and the number of times SQL has had to wait on a row lock respectively. The page_lock_count and page_lock_wait_count represent the number of page locks that have been requested for an index and the number of times SQL has had to wait on a page lock respectively. The index_lock_promotion_attempt_count represents the number of times the database engine has attempted to promote a lock to the index level. The index_lock_promotion_count column displays how many times that index lock promotion was successful. Lastly the page_compression_attempt_count and page_compression_success_count represents how many times a page was attempted to be compressed and how many times the attempt was successful. As you can see there is a ton of information returned from this DMV. The DMV we reviewed on yesterday (sys.dm_db_index_usage_stats) provided you with good information on when and how indexes have been used, but this DMF takes an even deeper dive into these statistics. If you are interested in performing a very detailed analysis on the operational stats of your indexes, this is not only a good place to start, but more than likely the best place. For more information on this Dynamic Management Function, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms174281.aspx Follow me on Twitter @PrimeTimeDBA

    Read the article

  • Oracle Security Inside Out Newsletter – June Edition

    - by Troy Kitch
    This month’s Information In Depth Newsletter, Security Inside Out Edition is now available. In this edition we look at the Gartner Security and Risk Management Summit 2011, discuss safeguarding data from threats with Oracle Database Vault, and reveal the latest database security webcasts, videos, training, events and more. If you don’t have a subscription to this bi-monthly security information update, you can sign up here at the bottom of the page.

    Read the article

  • Amazon EC2 Creating Tunnel with OpenVPN

    - by nocode
    I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

    Read the article

< Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >