Search Results

Search found 29064 results on 1163 pages for 'network management'.

Page 533/1163 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

• Amazon EC2 Creating Tunnel with OpenVPN

  - by nocode

  I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

  Read the article

• RDP and New Accounts

  - by leeand00

  I created a new user account on the domain and added them to the Remote Desktop Users group. I could login just fine locally, but when I logged in remotely I was basically told that I could not login from there using that user. I could login just fine as the administrator or anybody else other than that new account. So I researched it a bit more and found that my setting looked like this on the local machine: So I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (NLA). Now when I tried this down at my office I connected with RDP just fine on another computer. But low and behold when I got home and simply try to connect to the machine, I get the message: There has to be some kind of in between setting, or additional setting that I need to change on the user that allows me to connect directly via remote desktop over the VPN. At the moment I can connect by connecting to another computer on the network and then RDPing from there into my machine, but this is not ideal.

  Read the article

• Port binding conflicts with "switch user" on Windows 7

  - by C-dizzle

  We are using the switch user function within Windows 7 under an active directory network. We have one application in particular that gives us an error: Only one usage of each socket address (protocol/network address/port) is normally permitted. bind Port 10001 Are there any other ports that can only be used at one time that might have an adverse effect on the other user? We try to mentor our users to use the log off function instead of switch user, but that doesn't always happen. As an alternative, is it possible to disable the 'switch user' button on our machines?

  Read the article

• Oracle Releases New Mainframe Re-Hosting in Oracle Tuxedo 11g

  - by Jason Williamson

  I'm excited to say that we've released our next generation of Re-hosting in 11g. In fact I'm doing some hands-on labs now for our Systems Integrators in Italy in a couple of weeks and targeting Latin America next month. If you are an SI, or Rehosting firm and are looking to become an Oracle Partner or get a better understanding of Tuxedo and how to use the workbench for rehosting...drop me a line. Oracle Tuxedo Application Runtime for CICS and Batch 11g provides a CICS API emulation and Batch environment that exploits the full range of Oracle Tuxedo's capabilities. Re-hosted applications run in a multi-node, grid environment with centralized production control. Also, enterprise integration of CICS application services benefits from an open and SOA-enabled framework. Key features include: CICS Application Runtime: Can run IBM CICS applications unchanged in an application grid, which enables the distribution of large workloads across multiple processors and nodes. This simplifies CICS administration and can scale to over 100,000 users and over 50,000 transactions per second. 3270 Terminal Server: Protects business users from change through support for tn3270 terminal emulation. Distributed CICS Resource Management: Simplifies deployment and administration by allowing customers to run CICS regions in a distributed configuration. Batch Application Runtime: Provides robust IBM JES-like job management that enables local or remote job submissions. In addition, distributed batch initiators can enable parallelization of jobs and support fail-over, shortening the batch window and helping to meet stringent SLAs. Batch Execution Environment: Helps to run IBM batch unchanged and also supports JCL functionality and all common batch utilities. Oracle Tuxedo Application Rehosting Workbench 11g provides a set of automated migration tools integrated around a central repository. The tools provide high precision which results in very low error rates and the ability to handle large applications. This enables less expensive, low-risk migration projects. Key capabilities include: Workbench Repository and Cataloguer: Ensures integrity of the migrated application assets through full dependency checking. The Cataloguer generates and maintains all relevant meta-data on source and target components. File Migrator: Supports reliable migration of datasets and flat files to an ISAM or Oracle Database 11g. This is done through the automated migration utilities for data unloading, reloading and validation. It also generates logical access functions to shield developers from data repository changes. DB2 Migrator: Similarly, this tool automates the migration of DB2 schema and data to Oracle Database 11g. COBOL Migrator: Supports migration of IBM mainframe COBOL assets (OLTP and Batch) to open systems. Adapts programs for compiler dialects and data access variations. JCL Migrator: Supports migration of IBM JCL jobs to a Tuxedo ART environment, maintaining the flow and characteristics of batch jobs.

  Read the article

• ifconfig return "unknown interface: no such device"

  - by xolstice

  I'm trying to install a Linux driver for my wireless network card (D-Link DWL-G510) on my Red Hat Linux 7.1 machine with a 2.4.37.9 kernel. I downloaded the serial monkey driver from the sourceforge site and was able to successfully compile the rt73 module and load it into the kernel. The problem now is that everytime I issue the command ifconfig wlan0 up it keeps returning with the following error message: wlan0: unknown interface: No such device. I'm at a loss as to what to do here. I specifed wlan0 as the alias for the rt73 module in the modules.conf and also tried to load the driver with the command modprobe rt73 ifname=wlan0 (this specifies the interface name according to the instructions packaged in the driver), but the error message still keeps coming up. Is there something else I need to do in Linux to configure the wlan0 part or is the module not recognizing the wireless network card? It would be quite strange if it is the later since all information from the Internet is indicating this is the linux driver I should be using for mentioned wireless card.

  Read the article

• How to Convert Your Nice Designs to Wordpress

  If you already spent ample time on the net, you have probably heard about WordPress before. It is an easy to use blog platform that also seconds as a fully competent content management system all ove... [Author: Kewin Alexander - Web Design and Development - April 12, 2010]

  Read the article

• Event SRV error 2012 in Windows Server 2008 R2

  - by Natkeeran

  Error Warning "Event SRV error 2012 in Windows Server 2008 R2" is being logged with increasing frequency. NIC drivers were updated recently. There are some drops in the switches. This is the error: SRV 2012 While transmitting or receiving data, the server encountered a network error. Occassional errors are expected, but large amounts of these indicate a possible error in your network configuration. The error status code is contained within the returned data (formatted as Words) and may point you towards the problem.

  Read the article

• [Update] RedGate SQL Source Control and TFSPreview

  - by andyleonard

  31 Oct 2012 Update: SQL Source Control 3.1 is available! - Andy 12 Oct 2012 Update: The SQL Source Control 3.1 update is currently unavailable. I will provide additional updates when this version is re-released. - Andy I am excited that RedGate ’s SQL Source Control now supports connectivity to TFSPreview , Microsoft ’s cloud-based Application Life Cycle Management portal. Buck Woody ( Blog | @buckwoody ) and I have written about TFSPreview at SQLBlog already: Team Foundation Server (TFS) in the...(read more)

  Read the article

• Public IP Routing over Private GRE tunnel

  - by Paul

  I have a GRE tunnel configured between two linux boxes. The tunnel works fine. I can ping from each host the other private ip. Head privateip: 10.0.0.1 publicip: 8.8.8.8 Tail privateip: 10.0.0.2 publicip: 7.7.7.7 The public IP on Tail has the network block 9.9.9.0/23 statically routed over the 7.7.7.7 interface. The idea is to make the 9.9.9.0/23 ips work on servers on the 8.8.8.8 network. I configure the tail host to route the /23 block. I mounted a 9.9 IP on the head server. I can ping the 9.9 ip from the tail to the head. I can't ping the 9.9 ip from the public internet. I think I need to add some other routes because of gateway issues, but I can't seem to wrap my mind around it (not a router guy, just beating my way through something that I have never done before and vaguely understand) --danks

  Read the article

• Can't connect to Windows Server 2008 shared folders via VPN connection

  - by Pearl

  I set up an VPN connection on my 2008 server using RRAS. The VPN seems to work fine. I can connect from outside the network. I am also able to establish a remote access connection via the VPN-IP. However, I can't access my shared folders. After connecting to the VPN I can ping the server, but it is not shown in my networks. using \ip or \server-name doesn't work either, cannot be found. I checked ipconfig and this is what I found regarding the VPN: DNS-Suffix: Description: test Physical Adress: DHCP activated: No Auto-Config: Yes IPv4-Adress: 192.168.2.114 Sub: 255.255.255.255 Standard-gateway: DNS-Server: 192.168.0.1 NetBIOS: activated To clarify my IP-situation: server is connected to router with 192.168.0.x, the test-client is in an external network connected to a router with 192.168.1.x, server-client connection is using static ips with 192.168.2.x Can anyone help me with this one? The VPN should be ok since I am able to establish remote access.

  Read the article

• Nt4.0 Printer Driver not compatible with Vista?

  - by PhillC

  I've got a Brother Fax-8360P printer that has a standard printer port so it can be connected to my WindowsXP machine. I've found some drivers on the net that work and it is a pretty decent laser printer. However, when I try and connect up to it from my Vista machine over the network, it tells me that "The printer driver is not compatible with a policy enabled on your computer that blocks NT4.0 drivers". Main question - is it possible to alter this so that my Vista machine will allow me to print via the network. Secondary question - does anyone know of any generic driver that will work instead?

  Read the article

• Oracle Launches New Oracle Database 12c Administrator Certifications

  - by Brandye Barrington

  Today Oracle University announces the release of new Oracle Database 12c Administrator certifications. The new Oracle Database 12c certifications emphasize the foundational and advanced skills needed by Database Administrators and will prepare DBAs to leverage powerful new management and consolidation capabilities, resulting in an even more valuable credential for customers and partners. ORACLE CERTIFIED ASSOCIATE (OCA)  The Oracle Certified Associate (OCA) for Oracle Database 12c objectives measure IT professionals' mastery of day-to-day administration skills and their ability to manage the challenges they're likely to encounter on the job. This credential focuses on SQL skills, operational administration of the Oracle Database including performance and space management, and installing, patching and upgrading the Oracle Database. Earning the OCA credential requires successful completion of two exams: 1Z0-061 - Oracle Database 12c: SQL Fundamentals and 1Z0-062 - Oracle Database 12c: Installation and Administration. The OCA certification track also allows for several alternate exams which can be substituted for 1Z0-061. ORACLE CERTIFIED PROFESSIONAL (OCP) Building on the competencies in the Oracle Database 12c OCA certification, the Oracle Certified Professional (OCP) for Oracle Database 12c certification includes advanced knowledge and skills required of top-performing database administrators. The OCP credential focuses on developing and implementing backup and recovery strategies, designing consolidation strategies to exploit multitenant container and pluggable databases, and thorough understanding how CDB/PDBs fit into the DBaaS cloud-computing model. Today, Oracle is releasing 1Z0-060 - Upgrade to Oracle Database 12c, which allows Oracle Certified Professionals with credentials in Oracle 9i, Oracle Database 10g or Oracle Database 11g to upgrade to Oracle Database 12c with a single exam. The upgrade exam focuses on designing consolidation strategies to exploit multitenant container and pluggable databases, implementing Oracle 12c feature-rich ILM support, optimizing SQL execution using dynamic swapping of sub plans, implementing real-time data redaction within databases, as well as exploiting many additional performance, backup and recovery, security and partitioning enhancements. The exam also includes a thorough review of core DBA skills. Visit the OCP certification track for more details on the new upgrade exam as well as alternate certification paths. ORACLE CERTIFIED MASTER (OCM) The Oracle Certified Master (OCM) for Oracle Database 12c - a very challenging and elite top-level certification - certifies the most highly skilled and experienced database experts. Further information on the 12c OCM level will be announced as exam development concludes. To date, there have been more than 1.6 million Oracle certifications granted worldwide. Explore these certification tracks, exam requirements and objectives, and start toward earning your exciting new Oracle Database 12c certification credentials from Oracle.

  Read the article

• KVM CLI install for CentOS 6.3 defaults to Minimal Install

  - by i.h4d35

  So I now I've installed KVM (and its associated tools and packages- libvirt, VMM etc.). On the GUI (i.e using the VMM), installation works as its supposed to. However, when I try to create a VM using the command line interface, the OS (I am working with CentOS 6.3) defaults to a Minimal Install instead of giving me options to choose from at the time of installation. I am trying to install using the following command: virt-install \ --connect qemu:///system \ --virt-type kvm --name testVM2 \ --ram 512 --disk path=/var/lib/libvirt/images/testVM2.img,size=8 --vnc \ --cdrom /media/db18de8e-0853-49fb-80de-5c794d58a46f/CentOS-6.3- x86_64-bin-DVD1.iso \ --network network=default Specifying the OS-type or the OS-variant parameters doesn't make a difference. Is there something that I am missing out on or some other parameter that I must specify? Thanks in advance.

  Read the article

• Event ID 8021 The browser was unable to retrieve a list of servers from the browser master

  - by Ash

  We have a LAN where workstations are randomly losing network connectivity for brief moments of time. The workstations can also take a long time to login to the domain. During our troubleshooting we have found an error log on a few Windows 7 workstations: Warning BROWSER 8021 The browser was unable to retrieve a list of servers from the browser master \\random-pc on the network \Device\NetBT_Tcpip_{BBABCDE9-D8A0-4399-93F2-492FE0848B12}. The data is the error code. What do these errors mean? What computers should have the Computer Browser service enabled, workstations and/or servers? The environment is a mix of Windows 7 & Windows XP workstations on a Windows Server SBS 2011 SP1 domain.

  Read the article

• Oracle’s Sun Server X4-8 with Built-in Elastic Computing

  - by kgee

  We are excited to announce the release of Oracle's new 8-socket server, Sun Server X4-8. It’s the most flexible 8-socket x86 server Oracle has ever designed, and also the most powerful. Not only does it use the fastest Intel® Xeon® E7 v2 processors, but also its memory, I/O and storage subsystems are all designed for maximum performance and throughput. Like its predecessor, the Sun Server X4-8 uses a “glueless” design that allows for maximum performance for Oracle Database, while also reducing power consumption and improving reliability. The specs are pretty impressive. Sun Server X4-8 supports 120 cores (or 240 threads), 6 TB memory, 9.6 TB HDD capacity or 3.2 TB SSD capacity, contains 16 PCIe Gen 3 I/O expansion slots, and allows for up to 6.4 TB Sun Flash Accelerator F80 PCIe Cards. The Sun Server X4-8 is also the most dense x86 server with its 5U chassis, allowing 60% higher rack-level core and DIMM slot density than the competition.  There has been a lot of innovation in Oracle’s x86 product line, but the latest and most significant is a capability called elastic computing. This new capability is built into each Sun Server X4-8.   Elastic computing starts with the Intel processor. While Intel provides a wide range of processors each with a fixed combination of core count, operational frequency, and power consumption, customers have been forced to make tradeoffs when they select a particular processor. They have had to make educated guesses on which particular processor (core count/frequency/cache size) will be best suited for the workload they intend to execute on the server.Oracle and Intel worked jointly to define a new processor, the Intel Xeon E7-8895 v2 for the Sun Server X4-8, that has unique characteristics and effectively combines the capabilities of three different Xeon processors into a single processor. Oracle system design engineers worked closely with Oracle’s operating system development teams to achieve the ability to vary the core count and operating frequency of the Xeon E7-8895 v2 processor with time without the need for a system level reboot.  Along with the new processor, enhancements have been made to the system BIOS, Oracle Solaris, and Oracle Linux, which allow the processors in the system to dynamically clock up to faster speeds as cores are disabled and to reach higher maximum turbo frequencies for the remaining active cores. One customer, a stock market trading company, will take advantage of the elastic computing capability of Sun Server X4-8 by repurposing servers between daytime stock trading activity and nighttime stock portfolio processing, daily, to achieve maximum performance of each workload.To learn more about Sun Server X4-8, you can find more details including the data sheet and white papers here.Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software. He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Strongswan and OpenVPN together

  - by cmorgia

  I have an host in Amazon EC2 which is configured with an OpenVPN Access Server. The only client to this server is acting as a gateway from a private network. I installed StrongSWAN 5 on the same host to allow windows 7 and iOS clients to connect using IPSEC. Both services works but what I cannot figure out is how to configure StrongSWAN to consider the OpenVPN tunnel endpoint as the only gateway available to clients. Basically I want all the traffic that comes from IPSEC clients to be entirely forwarded to the OpenVPN tunnel. The remote OpenVPN client that is exposing the private network has forwarding enabled and appropriate masquerading configured. The only missing point is to have the OpenVPN tunnel as the gateway for IPsEC clients

  Read the article

• AT&T’s new prepaid plan for smartphones –$65 for 1 GB data and unlimited calls, text

  - by Gopinath

  AT&T is stepping up competition in prepaid mobile plans offering and trying to attract more smartphone customers who are not interested to lock in with expensive contracts. Today AT&T announced a new prepaid plan for smartphone customers which offers 1 GB of , unlimited calls and text for $65 a month. Compared to existing plans that offers same , the new plan saves $10 per month and rates are comparable to T-Mobile prepaid service. The new plan will be available to all prepaid customers from October 7, 2012. I’m using AT&T prepaid plan for the past 3 months and paying $75 for 1 GB data, unlimited calls. Few days ago I did some analysis on prepaid plans offered by various network providers and found T-Mobile has cheapest plans that suits my needs – $60 for 2 GB data,  unlimited calls and texts. Even though T Mobile’s network coverage is not as great as AT&T in the area where I live, I planned to switch to save $15 per month. After reading today’s announcement, I don’t think that I’ll switch to T Mobile for saving $5 + 1 GB of extra data.  Thanks AT&T for the new plan, I’ll stay with you for now. via engadget

  Read the article

• Can I setup a link SQL server connection between servers on different networks?

  - by Glenn Slaven

  We have a production SQL server hosted offsite at a hosting company, and we have a staging environment within our own network. We want to be able to setup a SQL job that copies content from a table on the staging server to prod on a regular basis, and I think we need to setup a linked server connection to do this. What do I need to get the hosting company to do to allow us to set this up? We have RDP access to the production servers, I just need to know what network and security configurations need to happen from the hosting company's perspective so I can ask them to do it.

  Read the article

• iMac G5 20" (First All-In-One White Screen) Cannot Connect To Internet

  - by Goober

  The Scenario I've got an iMac G5 20" (First All-In-One White Screen) PPC. It has an Airport Extreme Network card in order to wirelessly to connect to the internet. For the most part I connect using ethernet as opposed to wirelessly, but recently have had the need to connect using the wireless. The Hardware BT Home Broadband Wireless Router. iMac G5 20" From about 5 years ago (First All-In-One White Screen) The Issue Even though I know for a fact that It has connected to the internet wireslessly in the past, for some reason it can discover the wireless router, but upon entering the password it fails to connect. I have tried multiple times to no avail. I have 2 other Mac's on the network and a pc that can all connect wirelessly. However both the mac's. Question Any ideas as to why my really old iMac G5 can't connect wirelessly anymore!?

  Read the article

• How to set up server/domain name correctly in hosts file with HTTPS

  - by Byakugan

  I am trying to do local network and I am using these kind of types of network. 1) Main server which connects to internet with static IP 2) Second computer connected to first one locally with address like 192.168.0.2 - when I write this address to address line it is like i wrote localhost in original main server - so it should show my local web browser etc ... It has domain name this IP and connected router for it ... example www.domain.com so I added to my main server hosts file (linux powered) lines like these: 192.168.0.2 domain.com www.domain.com It was working ok when I entered my domain name in local computer it showed my site ... But after some time I added HTTPS cerfiticate and added this line to my apatche server: Redirect permanent / https://www.domain.com/ And now it does not work even when i add something like this to my hosts file: 192.168.0.2 https://www.domain.com So any idea how do do this thing work? Thank you.

  Read the article

• Thread placement policies on NUMA systems - update

  - by Dave

  In a prior blog entry I noted that Solaris used a "maximum dispersal" placement policy to assign nascent threads to their initial processors. The general idea is that threads should be placed as far away from each other as possible in the resource topology in order to reduce resource contention between concurrently running threads. This policy assumes that resource contention -- pipelines, memory channel contention, destructive interference in the shared caches, etc -- will likely outweigh (a) any potential communication benefits we might achieve by packing our threads more densely onto a subset of the NUMA nodes, and (b) benefits of NUMA affinity between memory allocated by one thread and accessed by other threads. We want our threads spread widely over the system and not packed together. Conceptually, when placing a new thread, the kernel picks the least loaded node NUMA node (the node with lowest aggregate load average), and then the least loaded core on that node, etc. Furthermore, the kernel places threads onto resources -- sockets, cores, pipelines, etc -- without regard to the thread's process membership. That is, initial placement is process-agnostic. Keep reading, though. This description is incorrect. On Solaris 10 on a SPARC T5440 with 4 x T2+ NUMA nodes, if the system is otherwise unloaded and we launch a process that creates 20 compute-bound concurrent threads, then typically we'll see a perfect balance with 5 threads on each node. We see similar behavior on an 8-node x86 x4800 system, where each node has 8 cores and each core is 2-way hyperthreaded. So far so good; this behavior seems in agreement with the policy I described in the 1st paragraph. I recently tried the same experiment on a 4-node T4-4 running Solaris 11. Both the T5440 and T4-4 are 4-node systems that expose 256 logical thread contexts. To my surprise, all 20 threads were placed onto just one NUMA node while the other 3 nodes remained completely idle. I checked the usual suspects such as processor sets inadvertently left around by colleagues, processors left offline, and power management policies, but the system was configured normally. I then launched multiple concurrent instances of the process, and, interestingly, all the threads from the 1st process landed on one node, all the threads from the 2nd process landed on another node, and so on. This happened even if I interleaved thread creating between the processes, so I was relatively sure the effect didn't related to thread creation time, but rather that placement was a function of process membership. I this point I consulted the Solaris sources and talked with folks in the Solaris group. The new Solaris 11 behavior is intentional. The kernel is no longer using a simple maximum dispersal policy, and thread placement is process membership-aware. Now, even if other nodes are completely unloaded, the kernel will still try to pack new threads onto the home lgroup (socket) of the primordial thread until the load average of that node reaches 50%, after which it will pick the next least loaded node as the process's new favorite node for placement. On the T4-4 we have 64 logical thread contexts (strands) per socket (lgroup), so if we launch 48 concurrent threads we will find 32 placed on one node and 16 on some other node. If we launch 64 threads we'll find 32 and 32. That means we can end up with our threads clustered on a small subset of the nodes in a way that's quite different that what we've seen on Solaris 10. So we have a policy that allows process-aware packing but reverts to spreading threads onto other nodes if a node becomes too saturated. It turns out this policy was enabled in Solaris 10, but certain bugs suppressed the mixed packing/spreading behavior. There are configuration variables in /etc/system that allow us to dial the affinity between nascent threads and their primordial thread up and down: see lgrp_expand_proc_thresh, specifically. In the OpenSolaris source code the key routine is mpo_update_tunables(). This method reads the /etc/system variables and sets up some global variables that will subsequently be used by the dispatcher, which calls lgrp_choose() in lgrp.c to place nascent threads. Lgrp_expand_proc_thresh controls how loaded an lgroup must be before we'll consider homing a process's threads to another lgroup. Tune this value lower to have it spread your process's threads out more. To recap, the 'new' policy is as follows. Threads from the same process are packed onto a subset of the strands of a socket (50% for T-series). Once that socket reaches the 50% threshold the kernel then picks another preferred socket for that process. Threads from unrelated processes are spread across sockets. More precisely, different processes may have different preferred sockets (lgroups). Beware that I've simplified and elided details for the purposes of explication. The truth is in the code. Remarks: It's worth noting that initial thread placement is just that. If there's a gross imbalance between the load on different nodes then the kernel will migrate threads to achieve a better and more even distribution over the set of available nodes. Once a thread runs and gains some affinity for a node, however, it becomes "stickier" under the assumption that the thread has residual cache residency on that node, and that memory allocated by that thread resides on that node given the default "first-touch" page-level NUMA allocation policy. Exactly how the various policies interact and which have precedence under what circumstances could the topic of a future blog entry. The scheduler is work-conserving. The x4800 mentioned above is an interesting system. Each of the 8 sockets houses an Intel 7500-series processor. Each processor has 3 coherent QPI links and the system is arranged as a glueless 8-socket twisted ladder "mobius" topology. Nodes are either 1 or 2 hops distant over the QPI links. As an aside the mapping of logical CPUIDs to physical resources is rather interesting on Solaris/x4800. On SPARC/Solaris the CPUID layout is strictly geographic, with the highest order bits identifying the socket, the next lower bits identifying the core within that socket, following by the pipeline (if present) and finally the logical thread context ("strand") on the core. But on Solaris on the x4800 the CPUID layout is as follows. [6:6] identifies the hyperthread on a core; bits [5:3] identify the socket, or package in Intel terminology; bits [2:0] identify the core within a socket. Such low-level details should be of interest only if you're binding threads -- a bad idea, the kernel typically handles placement best -- or if you're writing NUMA-aware code that's aware of the ambient placement and makes decisions accordingly. Solaris introduced the so-called critical-threads mechanism, which is expressed by putting a thread into the FX scheduling class at priority 60. The critical-threads mechanism applies to placement on cores, not on sockets, however. That is, it's an intra-socket policy, not an inter-socket policy. Solaris 11 introduces the Power Aware Dispatcher (PAD) which packs threads instead of spreading them out in an attempt to be able to keep sockets or cores at lower power levels. Maximum dispersal may be good for performance but is anathema to power management. PAD is off by default, but power management polices constitute yet another confounding factor with respect to scheduling and dispatching. If your threads communicate heavily -- one thread reads cache lines last written by some other thread -- then the new dense packing policy may improve performance by reducing traffic on the coherent interconnect. On the other hand if your threads in your process communicate rarely, then it's possible the new packing policy might result on contention on shared computing resources. Unfortunately there's no simple litmus test that says whether packing or spreading is optimal in a given situation. The answer varies by system load, application, number of threads, and platform hardware characteristics. Currently we don't have the necessary tools and sensoria to decide at runtime, so we're reduced to an empirical approach where we run trials and try to decide on a placement policy. The situation is quite frustrating. Relatedly, it's often hard to determine just the right level of concurrency to optimize throughput. (Understanding constructive vs destructive interference in the shared caches would be a good start. We could augment the lines with a small tag field indicating which strand last installed or accessed a line. Given that, we could augment the CPU with performance counters for misses where a thread evicts a line it installed vs misses where a thread displaces a line installed by some other thread.)

  Read the article

• Ideas for campus Internet Login mechanism?

  - by miCRoSCoPiCeaRthLinG

  Hello, I work at this university and I'm seeking an effective solution for an internet login mechanism. We have a leased-link at our campus, which is shared by both staff & students. All systems (desktops + laptops + handhelds) connect to the internal network via wifi and can then get onto the net. However, a local govt. regulation requires us to keep track of individual internet usage and hence we need a solution (pref. free / opensource) that'll enable us to implement some sort of an authentication mechanism once a user hooks onto the network. One requirement is that the software should be able to authenticate either against LDAP or some other custom user database (MySQL based) or both. Can anyone suggest any such software or mechanism? Most of our servers are Linux based... so something that runs off such a platform will be good. Thanks, m^e

  Read the article

• Connecting together DIR-615 and DIR-655

  - by ra170

  On my DIR-655 my internal network is: 192.168.0.x On my DIR-615 my internal network is: 192.168.1.x They are both connected to my firewall PIX 501 box The PIX itself is connected to the comcast modem. I briefly looked at the menu options on those router and they look similar, however I'm not sure what's the best way to connect those two together so that I can go between those networks. (printing, file browsing, etc.) I'm not sure if I have to do this somehow on those two router or on the PIX itself, or probably on all of them. If anyone has experience with something like that please let me know..

  Read the article

• Windows 7 Connection Sharing unable to access some sites

  - by Kristopher Ives

  I have a pretty sad networking situation that involves connecting to an open Wireless network and sharing that connection to an Ethernet that is plugged into a Linksys router. This has been done with XP and Windows 7, and it works great with XP. The problem with Windows 7 is that only some DNS will work. I don't know if it's been poisoned on the network above us (which we have no control over), but we've tried clearing the DNS cache as well as moving to using Google's DNS servers (8.8.8.8, 8.8.4.4). Here is a really quick list of sites that won't respond to DNS requests at all via dig, although if I get the IP address I can ping them: facebook.com yuilibrary.com twitter.com A lot of sites do work though. Anyone have an idea? It may be a subnet problem? If anyone wants more info let me know.

  Read the article

• Very very slow transfer speeds between Windows 7 and samba server running on Ubuntu 11.10/12.04 minimal

  - by kuzyt

  As mentioned in the title I tried transferring files between Windows 7 and the samba server running on both Ubuntu 11.10 and 12.04 but both showed very slow transfer speeds. Can someone please guide me in the right direction to debug this problem ? wget --output-document=/dev/null http://tokyo1.linode.com/100MB-tokyo.bin --2012-08-21 22:02:17-- http://tokyo1.linode.com/100MB-tokyo.bin Resolving tokyo1.linode.com (tokyo1.linode.com)... 106.187.33.12 Connecting to tokyo1.linode.com (tokyo1.linode.com)|106.187.33.12|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 104857600 (100M) [application/octet-stream] Saving to: `/dev/null' 8% [=============> ] 8,923,980 64.8K/s eta 15m 0s wlan0 IEEE 802.11abgn ESSID:"TNET" Mode:Managed Frequency:2.462 GHz Access Point: 58:6D:8F:26:20:7A Bit Rate=117 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=57/70 Signal level=-53 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:101 Invalid misc:2448 Missed beacon:0 03:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01) Subsystem: Atheros Communications Inc. Device 3112 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=128K] Expansion ROM at fea20000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [300 v1] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >