Search Results

Search found 28828 results on 1154 pages for 'i heart ubuntu'.

Page 572/1154 | < Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >

• How to know which partition is which?

  - by user206870

  Well I was just wondering what partition belongs to which. On my computer I have Windows 7 and two Ubuntu systems (it was an accident, which is why I need to know which partition is which). So how do I know which one is which?? PS here's the codes: jp@jp-Satellite-L555D:~$ sudo update-grub [sudo] password for jp: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.11.0-12-generic Found initrd image: /boot/initrd.img-3.11.0-12-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sda2 Found Windows Recovery Environment (loader) on /dev/sda3 Found Ubuntu 13.10 (13.10) on /dev/sda7 done jp@jp-Satellite-L555D:~$ sudo fdisk -l Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf6f5148e Device Boot Start End Blocks Id System /dev/sda1 * 2048 3074047 1536000 27 Hidden NTFS WinRE /dev/sda2 3074048 213421022 105173487+ 7 HPFS/NTFS/exFAT /dev/sda3 469676032 488396799 9360384 17 Hidden HPFS/NTFS /dev/sda4 213422078 469676031 128126977 5 Extended /dev/sda5 300185600 463910911 81862656 83 Linux /dev/sda6 463912960 469676031 2881536 82 Linux swap / Solaris /dev/sda7 213422080 300185599 43381760 83 Linux Partition table entries are not in disk order Thanks to whoever can answer this. Another quick question, what is the extended partition??

  Read the article

• How do I transition from WUBI to a native installation?

  - by Sammy Black

  I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

  Read the article

• Installing 10.10+ with Radeon HD 6970 Video Card

  - by Ben Lacy

  I built a new PC that has a Diamond Radeon HD 6970 graphics card, and no on-board graphics. When I boot from the Ubuntu disc, it runs through some initial booting stuff, and then gets to a loading screen that just has the Ubuntu logo and some progress bar/dot thingies. After this screen is finished, it goes black and says it cannot display video mode. I've seen many people that say to simply install the ati drivers. However, I don't believe this is an option, because I can't even get to the boot screen that asks me if I want to run the system off of the LiveCD, boot to hard disk, etc... Is there a way to somehow boot to a CLI before getting to the screen that would normally let me choose that? I'm at a loss as far as what to do. Also: Yes, the CD boots fine on other machines. (I've also burnt a couple discs just to be sure) Yes, the graphics card is fine. I normally dual-boot with Windows 7, and it runs on Windows just fine. Thanks for any help!

  Read the article

• Backtick (Grave accent) button sticking

  - by Scott Lemmon

  I have Ubuntu 12.04 running in a Virtual Box virtual machine, on my Windows 7 32bit system. It has been working great, except that the backtick/tilde button sticks(not physically). When I hit the backtick button it keeps repeating until another input button is pressed. So if I press the spacebar while the backtick is repeating, it stops, but if I press the shift while it is repeating, the backtick turns into a tilde, and the tilde keeps repeating until I release the shift key (at which point it's a backtick again and keeps repeating). This sticking behavior only happens with the backtick key, and only in my Ubuntu virtualization, never in windows. I've tried both my laptop's keyboard and an external USB keyboard and the problem happens on both. Both keyboards I've tried are Japanese 106/109 key layout, but I'm using them with a English(US) 101 profile. When I refer to the backtick key above, I mean where it is on the US layout. If I use the Japanese profile, the key in that location (the US backtick location) still sticks, but its no longer mapped as the backtick key. Any thoughts as to what might be causing this and possible solutions? I've searched a lot, but have not found any help so far. Any help is greatly appreciated.

  Read the article

• How can I fix the "TERM environment variable not set" warning in eclipse

  - by Robert

  I'm running ubuntu 12.04 LTS and working with eclipse (juno) on a c++ project. I keep getting "TERM environment variable not set" in the console while trying to run the program. I realize this means the variable needs to get set. My question is what should it be set to and how do I set it? I've read that it should be 'xterm' in a few places. So I added export TERM=xterm in my .profile and while eclipse stopped giving me the warning, instead it would output unreadable garbage everynow and then (not a side effect of the program). It did display the program output but intermixed were weird characters. This leads me to believe it's not 'xterm' I should be setting TERM to. Or I'm setting it in an incorrect way. Any help is appreciated. Sample output: **TERM environment variable not set.** Please make a selection ----------------------- 1. Create a budget 2. Edit a budget 3. Display a budget 4. Save a budget 5. Load a budget 6. Exit What is your selection: 1 **TERM environment variable not set.** Enter the name of your budget: etc The program continues to execute as expected but the message is highly annoying As someone has commented, I do use system("clear") which is likely the source of the warning? Either way, is this likely just an eclipse issue or something I can fix in ubuntu/linux

  Read the article

• How do I boot into console mode (redux)

  - by Leo Simon

  I'm running Ubuntu 12.04. This question was asked some time ago How do I disable the boot splash screen? but the answers didn't work for me. The standard way to boot into console mode used to be to edit /etc/default/grub and set GRUB_CMDLINE_LINUX_DEFAULT="text" This worked fine until I ran the fix proposed in https://help.ubuntu.com/community/SoundTroubleshootingProcedure in order to get sound to work. Since then, I have disabled the boot-splash-screen, but I can avoid what I presume is the lightdm login prompt screen. All I want to do is disable this gui and be prompted with a console login prompt. (Shouldnt be so hard should it???) I read in three 33416 mentioned above that there was a bug in lightdm (it wasn't recognizing "text" properly as an option for GRUB_CMDLINE_LINUX_DEFAULT.) But this discussion happened more than a year ago, and it's surely been fixed. Yet my lightdm is uptodate (so I'm told when I try to update it with apt-get). As suggested in one of the above, I tried sudo update-rc.d -f lightdm remove which resulted in a hung machine. I managed to recover using recovery mode, but now I still get the gui again. Another suggestion is to edit /etc/init/lightdm.override. I've done this and set it to "manual" as suggested, but lightdm simply ignores this. Could somebody suggest how to proceed please? Thanks very much, Leo

  Read the article

• Creating a GTK theme, but Qt and Java apps are not affected, and title bar button layout is ugly

  - by Mr. Pixel

  I'm playing with a gtk2 / gtk3 theme which I use in the Mate desktop. Everything is looking well, even gtk3 apps, but I still have 3 important issues: Java apps ignore the theme QT apps ignore the theme I'm using those nice ubuntu 10 title bar buttons, but the problem is, when only the close button appears, the title bar looks ugly. Can I make it so that it shows the two other buttons, but disabled? I don't know how Ubuntu 10 handled this. Here's a screenshot showing the 3 problems (above is a small java app, below is a Qt app): Under my previous desktop environments, Unity and Cinnamon, both apps seemed to be taking the right theme correctly, but I did not use my custom theme yet. Cinnamon is based on gnome-shell by the way, and mate is a gnome2-fork. Please note that the shown java app explicitely tries to load the gtk theme at runtime. By default, java apps don't, but this one has the necessary code, which worked in unity and cinnamon. Any suggestions how I could make my theme better so these problems disappear? Thank you very much!

  Read the article

• What is the way to submit a patch to fix all the damage that LP: #600941 causes?

  - by nutznboltz

  What is the best way to submit a patch to fix all the damage that LP: #600941 causes? I ask because LP: #600941 was put into every version of Ubuntu still supported at this time. Should I pick a particular version and run ubuntu-bug on it? Should that version be the LTS or Oneiric or Precise (how can I get Precise if I need it?) The story is that after it was pushed out all of our systems started experiencing Nagios nrpe restart failures. Commands like /etc/init.d/nagios-nrpe-server restart would cause nrpe to stop but not restart. I tracked this down to the way that the /etc/init.d/nagios-nrpe-server script is calling start-stop-daemon. The issue is that the "stop" stanza in the /etc/init.d/nagios-nrpe-server script first calls start-stop-daemon which sends SIGTERM to nrpe and then waits only for one second. If nrpe has not exited by that time the pid file will still exist and the /etc/init.d/nagios-nrpe-server script will remove it. Worse if /etc/init.d/nagios-nrpe-server restart is used not only will the pid file be removed, the attempt to restart nrpe will fail provided that the nrpe daemon is still tardy in shutting down. The attempt to start under those circumstances will fail because nrpe will still be bound to a socket and the second attempt at binding will cause the nrpe startup to abort. They should have wondered why there was a comment about "sometimes the pid file does not get removed". They should have tested on systems that have a heavy load and therefore slow nrpe response times. The fix is to add --retry 10 or such to the invocation of start-stop-daemon ... --stop ... Thanks

  Read the article

• Alt-Tab looses focus and have to hit Alt-Grave Accent to get focus

  - by John Hamill

  Alt-Tab looses focus and have to hit Alt-Grave Accent to get focus I have ubuntu 12.4 with Unity window manager. I have a gvim window and a firefox window open. I hit Alt-Tab to switch between the two. Sometimes the gvim window doesn't have focus and I have to hit Alt-GraveAccent (Alt-`) to get the gvim window to have focus (ie: have the cursor a solid white square instead of a outline of a square) I do this to move between firefox where I highlight some text and do a copy, then Alt-Tab to gvim and do a paste. Sometimes the focus isn't in gvim and the paste doesn't work. I then have to do an Alt-graveAccent to get the focus into gvim or click the gvim window. These extra steps slow my process down and it makes it difficult to get into a smooth rythum. I saw this: ALT+TAB loses focus Maybe the Alt-GraveAccent may help someone. It's a unity bug: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1035628 Your best bet is to wait until an update comes through fixing it.

  Read the article

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• debian/rules error "No rule to make target"

  - by Hairo

  i'm having some problems creating a .deb file with debuild before reading some tutorials i managed to make the file but i always get this error: make: *** No rule to make target «build». Stop. dpkg-buildpackage: failure: debian/rules build gave error exit status 2 debuild: fatal error at line 1329: dpkg-buildpackage -rfakeroot -D -us -uc -b failed Any help?? This is my debian rules file: #!/usr/bin/make -f # -*- makefile -*- # Sample debian/rules that uses debhelper. # This file was originally written by Joey Hess and Craig Small. # As a special exception, when this file is copied by dh-make into a # dh-make output file, you may use that output file without restriction. # This special exception was added by Craig Small in version 0.37 of dh-make. # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 build-stamp: configure-stamp dh_testdir touch build-stamp clean: dh_testdir dh_testroot rm -f build-stamp configure-stamp dh_clean install: build dh_testdir dh_testroot dh_clean -k dh_installdirs $(MAKE) install DESTDIR=$(CURDIR)/debian/pycounter mkdir -p $(CURDIR)/debian/pycounter # Copy .py files cp pycounter.py $(CURDIR)/debian/pycounter/opt/extras.ubuntu.com/pycounter/pycounter.py cp prefs.py $(CURDIR)/debian/pycounter/opt/extras.ubuntu.com/pycounter/prefs.py # desktop copyright and others (not complete, check) cp extras-pycounter.desktop $(CURDIR)/debian/pycounter/usr/share/applications/extras-pycounter.desktop

  Read the article

• Hybrid USB Install Method - netboot and iso

  - by Samus Arin

  I was following the steps here ("Preparing Files for USB Memory Stick Booting") https://help.ubuntu.com/10.04/installation-guide/i386/boot-usb-files.html to create a installation usb drive for 12.1. The very first paragraph of the article states "The second is to also copy a CD image onto the USB stick and use that as a source for packages, possibly in combination with a mirror." However, the only instructions mentioned regarding an iso image is to simply copy one somewhere on the drive (after its been made bootable and syslinux, vmlinuz and initrd.gz installed/copied): "you should now copy an Ubuntu ISO image onto the stick." I thought it strange there where no configuration steps for "pointing" the kernel to the iso (like a line in syslinux.cfg or a boot: option or something), but went ahead with the install anyway. I don't think the iso was used at all, it appeared that all the OS files where downloaded during the install process. Therefore, I was wondering if anyone knew how to use this local iso image in this particular installation technique (I know the image can be installed with dd, but thats a different technique), b/c I need to reinstall (I installed unity, but it's wayy to much for my little Atom based netbook) ? Thank you.

  Read the article

• Xfce gets really confused about session saving, etc

  - by Pointy

  I'm getting a new laptop running with 11.04 Ubuntu. I've got the xfce4 packages all installed, which is something I've had no problems with on any of my other machines. On this new laptop, however, though I can log in and use an xfce session without any problems, logging out of a session is problematic: I click the "Log out" widget from the panel and then "Log out" from its option dialog. Then the thing just sits there, not logging out. Subsequent attempts to open the "Log out" widget fail with an error about the session manager being busy. After maybe a minute or so, it logs out. Though I've got the "Save session" option checked in the log out dialog, xfce just makes a complete hash of the business. It does remember the applications that I had running, but it seems to forget about the window manager (!!) and the workspace configuration. I don't log in/out that often, and generally I don't care much about restarting applications, but the window manager being missing is of course pretty annoying. I like xfce because it's simple and unobtrusive and usually works pretty well. I've never experienced this, and I've got two other machines also running 11.04 with pretty much the same setup (straight Ubuntu install with xfce4 packages added). Is there some good way to diagnose stuff like that? edit — well I nuked my session cache, did an explicit save from the session widget, and now it works. Well, it doesn't save the workspace location for each client and instead opens them all up on the first workspace, but I think that may be because, in the session, xfwm4 is the last thing in the "Client" list, so before it's started all the other clients just pile up in the first (and only) workspace. I'm still curious about how exactly it gets so messed up. I certainly wasn't knowingly attempting anything fancy or unorthodox, though I may have done something fishy inadvertently.

  Read the article

• Is 12.10 ready from prime time?

  - by Mikey

  I recently installed 12.10 - dual boot using Wubi. I had numerous stability problems: many sporadic, unaccounted for system errors, software that was installed and then seemed to disappear from App Launcher, etc. Machine is new HP quad with 4 gig memory - wonderful piece of hardware - definitely no hardware problems there. I went back to 12.04 (installed from ISO image, not Wubi) and it's rock solid - never any issues at all. Is 12.10 not ready for prime time? Are there fixes-updates in the pipe? Should I get a DVD disc and install 12.10 from ISO instead of Wubi? New to Linux/Ubuntu after 20 years on MS/Windows and loving it - I develop in C++ and Python - maybe will try Lazarus since I know Delphi. Would like to use the latest and greatest Ubuntu but I will not sacrifice stabilty. Are there known problems with 12.10? Would using the standard install instead of Wubi help? Seems a lot of users are voting down this question - not sure why since other users have confirmed problems.

  Read the article

• Laptop drains of quickly with battery

  - by Shyam

  I am a user since years in ubuntu and I have not come across this problem with ubuntu till date. My battery drains off immediately after I unplug my AC power. The options I tried: 1) checked the battery state with : cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charged present rate: 0 mA remaining capacity: 392 mAh present voltage: 12476 mV Initially it was showing charging state: charging after 5mins it started displaying as charged. ! Based on that if I remove my AC Power it shows low battery notification. 2) When I run acpi : acpi -b Battery 0: Unknown, 9% The battery state shows as unknown. But initially when we plug-in to AC adapter acpi -b Battery 0: Charging, 9%, 13:04:00 until charged 3) When the check the same with : upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0A:00/power_supply/BAT0 vendor: HP power supply: yes updated: Thu Nov 1 16:06:40 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 4.2336 Wh energy-empty: 0 Wh energy-full: 33.1128 Wh energy-full-design: 33.1128 Wh energy-rate: 5.6052 W voltage: 12.474 V time to full: 5.2 hours percentage: 12.7854% capacity: 100% technology: lithium-ion Is the power stats output, It says 5hrs to charge completely, If I charge it even more than 5hrs and unplug the AC power, It again cribs stating LOW BATTERY !! The same thing does not happen with Windows7. Any suggestions/ help will be greatly appreciated.

  Read the article

• Netbook performs hard shutdown without warning on low battery power

  - by Steve Kroon

  My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

  Read the article

• How to install SIP+PyQt with apt-get + pip + virtualenv?

  - by kjo

  [I originally posted this question, under a different title, in StackOverflow (here), but later I realized that my problem is very specific to apt-get, hence I am re-posting it here. Sorry for the duplication.] I'm trying to install PyQt on Ubuntu (and within a virtualenv). The list of obstacles I'm dealing with is far too long to include here, but the one I'm currently trying to get past is this: % workon myvenv (myvenv)% cd ~/.virtualenvs/myvenv/build/pyqt (myvenv)% python ./configure.py Traceback (most recent call last): File "./configure.py", line 32, in <module> import sipconfig OK, so let's install sipconfig... (myvenv)% pip install SIP Downloading/unpacking SIP Downloading sip-4.14.8-snapshot-02bdf6cc32c1.zip (848Kb): 848Kb downloaded Running setup.py egg_info for package SIP Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' ---------------------------------------- Command python setup.py egg_info failed with error code 1 in /home/yt/.virtualenvs/myvenv/build/SIP Storing complete log in /home/yt/.pip/pip.log The only recipe I've found so far installing SIP is this % python configure.py % make % sudo make install ...but this recipe goes against my policy of doing all my Ubuntu installations either through apt-get (or through pip in the case of Python modules). Is there some way that I can install SIP with apt-get (and possibly pip)?

  Read the article

• How do I nstall MS Office 2010 via WINE?

  - by Emeris

  I am trying to install MS Office 2010 on Ubuntu 12.04 on my new MacBook Pro (15"). I already read and followed every existing threads on forums and followed every existing tutorial, but my problem seem unique so far, since whichever solution I try, the problem remains. When I launch PlayOnLinux, two boxes appear one after the other (before the latest upgrade of Ubuntu of last week, the second box did not appear, only the first one did); the first one tells me: Error: PlayOnLinux is unable to find 32-bits OpenGL libraries. You might encounter problem with your games." When I close this window, a second one pops up, stating: Error: PlayOnLinux cannot find 7z. You should install it to use PlayOnLinux. Of course, I tried purging PlayOnLinux (uninstalling it and re-installing it). I also tried other versions of PlayOnLinux. Nothing matters: the problem remains. I did not succeed so far to install 32-bits OpenGL libraries, since I have a Radeon graphics card (which seems to be unusual) and I just cannot find these libraries. Once the two "error" boxes are closed, PlayOnLinux is open, but does not seem to work properly; when I try to install Microsoft Office 2010, nothing happens. When I try to close PlayOnLinux, it is even worse: Unity seems unable to close it (I even had a frozen screen when trying to xkill it through the terminal). I am looking forward to any tips that could help. P.S.: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series]

  Read the article

• How do I install FreeNX server so that it works correctly?

  - by Niklas

  I've tried every single possible way of installing the server now, I've read every how to available and I still can't get it to work. Please let me know in which step I do wrong. I'm using ubuntu 10.10. I will mainly be referring to the following how-to, but also this, and this one. First I add the ppa Install Freenx Download the special Freenx package as stated in the howto, fix ownership - install it Create custom SSH key Copy the file /var/lib/nxserver/home/.ssh/client.id_dsa.key to the client and import it in nomachine (windows 7 x64) Check that both the user I will be logging in with and the user nx is in AllowedUsers in the /etc/ssh/sshd_config file Check the port that ssh is listening on Login through nomachine with my regular user account in ubuntu I always receive the message "authentication failed for [user]" when I try to log in. And I can't see the user "nx" which is said to be created during installation when I look under System-Administration-"Users & Groups". Can anyone please enlighten me if there is any step that I miss or have misunderstood? Thank you very much! (Or is there an easier way of enabling remote desktop that it can be used with a windows machine? I prefer not using VNC because I was hoping of being able to get better performance than that. And when I tried using XRDP I only received a black screen on the client.)

  Read the article

• Suspending my laptop breaks ethernet over firewire, are there commands which can fix it?

  - by Josh

  As mentioned in this question I am using a firewire cable to provide a private network between my laptop and my desktop, because it makes using the screen sharing program synergy much nicer than using WIFI. However when I leave my office for the day and I suspend my laptop, when I return the next day, the desktop and the laptop cannot communicate over firewire anymore. The firewire0 device still has an IP address. but when I try and ping the desktop I get no route to host I'm using kernel 2.6.35-24-generic #42-Ubuntu SMP x86_64 on Ubuntu 10.10. Is there some way I can remedy this without a reboot? Like, removing some kernel modules and re-inserting them? Here's what I have tried so far and the results: root@token:~# dmesg|tail -n 1 [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 root@token:~# modprobe -r firewire_net firewire_ohci firewire_core root@token:~# modprobe -v firewire_ohci insmod /lib/modules/2.6.35-24-generic/kernel/lib/crc-itu-t.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-core.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-ohci.ko root@token:~# dmesg|tail [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592563.410868] firewire_ohci: Removed fw-ohci device. [592579.160086] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [592579.160137] firewire_ohci: isochronous cycle inconsistent [592579.660294] firewire_core: created device fw0: GUID 0000000000000000, S400 [592579.663805] firewire_core: created device fw1: GUID 0017f2fffe89bce6, S400 [592579.663813] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700720] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700842] firewire_core: refreshed device fw0 [592579.702603] firewire_net: firewire0: IPv4 over FireWire on device 0000000000000000 root@token:~# ping stan.firewire PING stan.firewire (192.168.100.1) 56(84) bytes of data. From token.local (192.168.100.3) icmp_seq=1 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=2 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=3 Destination Host Unreachable I also tried removing the modules prior to suspending, and re-inserting after resuming. This did not work either :-(

  Read the article

• How do I install windows wireless driver for TP-Link TL-WN7200ND

  - by Jim

  I'm using the TP-Link TL-WN7200ND USB wireless adapter. I have downloaded the Windows drivers and updated Ubuntu to 10.10 by manually connecting the computer to the router. I also installed ndiswrapper-gtk. I get a Windows Wireless Drivers in my Administration menu, and I was able to get it to read the Windows 7 .inf file. The .inf for XP does not work. It adds it and the driver appears in the list with "Hardware: present". I set up the wireless connection information (ESSID and WPA2-Personal key). Problem: I don't see the network manager icon in the top right of the screen. I managed to manually start it manually using sudo services network-manager restart but it shows no connections in the menu, saying that there's nothing to manage. In my /etc/network/interfaces file I have an entry for the loopback and the standard two-liner for eth0 with dhcp. From memory, something like: iface eth0 auto eth0 dhcp I had read somewhere that 10.10 would have standard support for my wireless adapter (TL-WN7200ND) but that seems not to be the case. However, I don't ever remember having the network-manager icon in the top-right and it does not auto-start at the moment. This was originally an Ubuntu 9.10 install that I've upgraded over time. I also used to use pppoeconf to connect to the net, which might affect the /etc/network/interfaces file?

  Read the article

• Need a PCIe desktop graphics card for dual-monitor

  - by Graham

  I have a mid-2008 workstation with two HD monitors supporting HDMI and DVI inputs. Since Ubuntu 11.10, I have experienced no end of trouble with my NVidia Quadro NVS 290 in TwinView dual-monitor output. Others have similar desktop TwinView woes. I want a new graphics card. Previously I asked for a graphics card recommendation and response was Nvidia Geforce GTS 450... but really I'm looking for someone who has actually got a working dual-monitor desktop to tell me what card they use so I can get something that is known to work. So please, people who have no-issues with their 64-bit Ubuntu 12.04 Unity 3D desktop spread across two HD-resolution external monitors (either DVI or HDMI connector), and who also run Google Chrome (which throws a spanner due to its own GPU compositing)... please let me know what graphics card you have so I can buy one. Gathering Options These seem to be the Nvidia cards featuring dual DVI. But they all seem to be gaming cards - what has dual-DVI, good support, but is not a massive gaming card? Nvidia GTS 450 (previously recommended) - 2x DVI Nvidia GTX 550 Ti (used by System76) - 2x DVI Nvidia GT 430 (used by System76) - 1xDVI, 1xHDMI Nvidia GT 640 (found on NVidia site) - 1xDVI, 1xHDMI (also GT 620, GT 630) Has anyone had a good desktop dual-monitor Unity 3D experience with ATI cards?

  Read the article

• Is there a way to disable the hardware on/off switch for the Wireless interface?

  - by avee

  I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

  Read the article

• How do I get a Broadcom BCM4311 working?

  - by Fer1805

  I'm having serious problems installing the broadcom drivers for ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. Broadcom BCM4311 Wireless not working Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

  Read the article

• How to set up a (relatively) secure kiosk on Natty?

  - by Tim

  I'm trying to get my application to be the only thing a user sees when the machine is powered on - like a kiosk, but a little more secure. Ideally, what I'd like to happen is this: At machine power-on, the user sees the Ubuntu splash image, then my app. While the app is running, the user can't get back to the desktop or a text login prompt via any keyboard shortcut. This is the (relatively) secure bit. When the user exits the app, the user sees a shutdown image, then the machine powers off. In particular, I'd like to configure things so that the user never sees the Gnome desktop on startup or shutdown. At the moment, I've configured a default user to be logged on automatically, with an autostart item which starts my app, but after the Ubuntu startup screen the user sees the Gnome desktop briefly before my app is started. When the app is exited, the user is taken back to the Gnome desktop and has to shut the machine down manually. Also, because of time constraints, I can't really start over with a different window manager. Is there an easy way to configure all of this?

  Read the article

< Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >