Search Results

Search found 28828 results on 1154 pages for 'i heart ubuntu'.

Page 577/1154 | < Previous Page | 573 574 575 576 577 578 579 580 581 582 583 584  | Next Page >

• USB device is recognized but has no address

  - by SeanMG

  Good day folks, I'm trying to use a USRP1 with GNURadio if anyone knows what any of that is. I am running Ubuntu on a Windows 7 machine via VMware player. When I connect this USRP1 via USB 2.0 drive to Windows 7 it is recognized as Ettus Research LLC USRP1... When I connect the device to Ubuntu through VMware, it shows: usb device fffe:0002 on my removable devices. When I run lsusb I receive the following: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 001 Device 004: ID fffe:0002 When I run this program that comes with the USRP driver... uhd_find_devices I receive: -------------------------------------------------- -- UHD Device 0 -------------------------------------------------- Device Address: type: usrp1 name: serial: 00000000 So when I run this program, it does recognize the fact that this device is connected. However, the device has no address, no name, and has a null serial. I need to know the device address so I can run more programs in GNURadio. Does anyone know what the problem is here? Thanks!

  Read the article

• Slow USB 3.0 speeds

  - by Cygnus X

  Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

  Read the article

• 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

  - by Navraj

  Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

  Read the article

• nautilus crash when merging/overwriting files

  - by sBlatt

  On my Ubuntu 10.10, whenever I want to copy some files/folders over some other files/folders, or when I try to empty the trash, nautilus crashes! Example: I have a folder with some files. Now I want to overwrite this folder with a folder with the same name, same files, but some additional files, the merge window comes up, I choose merge and nautilus crashes (does not respond, when I press the close button I can force close it). Some times it even does the copying/emptying (trash), but it always crashes! This happens when copying to the same partition/ntfs partition/netshares, but not when I make a new folder and copy the files/folders into that (without overwriting anything). On a netshare, it's even possible to merge these files afterwards with another computer! dmesg/syslog/messages does not show any entry related to that problem. Does anyone have a solution for this very annoying problem? EDIT: dpkg -l nautilus* (see output in pastebin) EDIT2: I found out, nautilus already crashes before clicking replace/merge (as soon as the question appeares. In the video it's not entirely clear, that i click the cross before the force-close dialog appeares. Video of problem nautilus-debug-log.txt EDIT3: Filed bugreport: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/678233

  Read the article

• Ping Access to a Nested VM !! Plz Help

  - by Shivaramakrishnan

  I have a problem in communication between the host and the nested VM.This is my layout. I have installed KVM on host machine having a single nic interface (public ip) running Ubuntu.On top of this,I have VM running Ubuntu.I have installed KVM in this VM too.I then have a VM inside this running a web server. I am able to ping the host from this web server VM and ssh into it.But from host to VM ,ping is being unsuccessful. The VM (named L1hyp) on host was created using libvirt-manager and has IP of 192.168.122.8. The vswitch interface created at host is in default config (NAT-ed). Its IP is 192.168.122.1. Now this VM is also having a vswitch interface which is in default config (NAT-ed).Its IP is 192.168.100.1. The Web server VM is created on top of this L1hyp VM, is having an IP of 192.168.100.186. The Webserver VM uses 192.168.100.1 as its default gw. The L1hyp uses 192.168.122.1 as its default gw. From Host: ping 192.168.122.8 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS ping 192.168.100.1 - SUCCEEDS ping 192.168.100.186 - FAILS Comes up with Destination Host Unreachable From 192.168.122.1. But there is route to 192.168.100.0/24 subnet from host.Ping to 192.168.100.1 succeeds. From Webserver VM: ping 192.168.100.1 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS SSH from web server VM to host succeeds. Can anyone help me out what needs to be modified to have two way communication between the host and Webserver VM at the earliest? I am pondering over this problem for over a week now.

  Read the article

• Just installed 13.04 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.04 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Setting up Cluster Configuration using an existing web server as a Primary Node?

  - by RapidWebs

  Thanks in advance for any help which is issued! I am having a slight issue, and need help with the decision making process when it comes to setting up my Cluster Configuration, consisting on a line of Ubuntu Servers (12.04). We currently have a Primary node, which resides in the US within a Datacenter, but we are going to be using this for all serious bandwidth and resource intensive websites, and through a configuration of Virtualmin + Webmin, will be setup as a sort of pseudo-cluster, using Virtualmins Cluster Modules. Anyways, on to the issue: We also have a business line setup locally, with three servers. here are their specs: Intel P4 2.4 ghz, 1GB Ram, 110 gb sata, Ubuntu 12.04* AMD 1.3 ghz, 512MB Ram, 20 GB IDE P3 Xeon 800mhz (dual physical processors), 1GB Ram, 3 * 25 GB Raid Configuration (one in use for host operating system). The first machine is currently IN USE and is serving virtual hosts off a sub-domain. My question is this: How can I integrate the Secondary node (which will be the Primary node per say, in this smaller configuration...) which is currently in use, into the cluster configuration w/ the other two servers for: Sharing Resources Redundancy (HA?) NFS /w the two Raid Disks without having the FORMAT the secondary node, and start fresh moving all my services in to a DRBD network drive or something similar, and than restoring all active virtualmin's Virtual hosts. the idea is that I want minimal downtime to people currently being served from server2.mywebsite.com, and from what I understand, all services need to be on a NFS so that they can be mounted on demand and accessed from the other machine taking over (i.e. Heartbeat + DRBD Config.) but my issue is that i already have all these services installed to their default directory structure: how can i most easily setup this NFS and HA system, move all my desires services to this new drive, and do it with minimal down time, and without breaking Virtualmin and everything else on my server? even just some pointers, a thread i could read, or a step by step check list or run down of commands i could issue to get started would be great! thanks!

  Read the article

• How to get a Toshiba L505 to boot USB or CD

  - by ShroudedCloud

  OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

  Read the article

• Unwanted Chinese language got set in system settings

  - by Registered User

  I was discussing on the Ubuntu users list how to type in in Hindi (Indic language) in Libre Office and about a package installation problem. I have made some changes in system settings, following suggestions by some users. However, this morning when I did a reboot I am unable to see English as my default language. My system is showing some Chinese characters which I do not understand. All I wanted was to use Libre Office for a particular document in Hindi. What happened is that even Gmail is opening in Chinese. The system settings folder and others are also opening in Chinese. I am unable to use the system now. I have uploaded the snapshots here: please have a look. Upon a reboot, I was asked to rename all folders. Gmail opening in Chinese This is how menu on my system looks: half English and half Chinese Notice that in the third snapshot the calendar and menu are appearing in Chinese. I want the original US English menus and folder names back. I just wanted to type a document with Lohit Hindi font in Libre Office. I use Ubuntu 11.10. I do not use Unity, only Gnome desktop. I installed gnome-session-fallback a long time back and have been using that ever since. How do I get back to all English submenus and English folder names? I have a US English Keyboard and I use only US English. This thing which is now somehow set is unwanted.

  Read the article

• HTC Android device mounted as USB drive is read-only unless I'm root

  - by Ian Dickinson

  When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

  Read the article

• Missing driver ASUS PCE-N53 11n N600 PCI-E Adapter

  - by oyse

  I have problems with getting an Asus PCE-N53 11n N600 PCI-E Adapter card to work on my desktop computer. As far as I can tell no drivers are installed for the card. I know I can manually download the drivers directly from Asus, but I would rather not go that route. If there are anyone that knows about any packages or other things I can do to make this work would be much appreciated. Some systems details: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: d4:3d:7e:03:b9:1d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.173 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff *-network UNCLAIMED description: Network controller product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7100000-f710ffff $ lsmod Module Size Used by nvidia 12319264 51 vesafb 13844 1 snd_hda_codec_hdmi 32474 1 joydev 17693 0 bnep 18281 2 rfcomm 47604 0 bluetooth 180104 10 bnep,rfcomm snd_hda_codec_realtek 224173 1 snd_seq_midi 13324 0 ppdev 17113 0 snd_rawmidi 30748 1 snd_seq_midi usbhid 47199 0 hid 99559 1 usbhid nouveau 774641 0 parport_pc 32866 1 snd_hda_intel 33773 5 ttm 76949 1 nouveau snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel drm_kms_helper 46978 1 nouveau drm 242038 3 nouveau,ttm,drm_kms_helper snd_seq_midi_event 14899 1 snd_seq_midi snd_hwdep 13668 1 snd_hda_codec snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event i2c_algo_bit 13423 1 nouveau mxm_wmi 12979 1 nouveau wmi 19256 1 mxm_wmi mac_hid 13253 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 97362 0 video 19596 1 nouveau snd_timer 29990 2 snd_seq,snd_pcm snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_timer,snd_seq_device serio_raw 13211 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp r8169 62099 0

  Read the article

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• virtual install from ISO not getting virtual kernel

  - by Pete

  I have a KVM host (12.04.5) that I have been installing guests on in variety of ways. I just noticed recently one of my guests was running a generic kernel when I'm fairly certain I specified minimum virtual machine during install from a 12.04.2 server iso. From what I understand it should be running a stripped down kernel "optimized" for VMs. I set up another server to test, this time using a 14.04.1, and sure enough I ended up with uname -r returning 3.13.0-32-generic. It seems that if I use an .iso to install, I end up with generic regardless. However building with the vmbuilder ... --flavour virtual --suite precise ... (I don't have trusty available yet) script gives me an ubuntu 12.04.5 LTS system running kernel 3.2.0-67-virtual. The server FAQ mentions I should be getting the virtual kernel. What are practical advantages of using linux-image-virtual kernel? gives me the impression that it doesn't really matter functionally (in my case I only have a couple VMs running). I first thought was maybe I was somehow not applying the correct options because the installer F4 menu doesn't really give great feedback if the mode has been selected or not. Looking in the log /var/log/installers/syslog I see Command line: file=/cdrom/preceed/ubuntu-server-minimalvm.seed ... I know that I can install the virtual kernel package down the road, but why am I not, or should I be getting the virtual flavor of kernel from an ISO install when doing an minimum VM install?

  Read the article

• BCM2046B1 Bluetooth Dongle connection problem

  - by Andfoy

  Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

  Read the article

• Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

  - by AndyAtTheWebists

  I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

  Read the article

• Unable to start VMWare Workstation after upgrade to 13.04

  - by pst007x

  After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

  Read the article

• Unable to mount NTFS Partition after resizing

  - by sam

  I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• Encrypt SSD or not?

  - by JamesBradbury

  My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

  Read the article

• How can I "diff" two files with Nautilus?

  - by bioShark

  I have installed Meld and found out it's a great comparing tool. Unfortunately there is no integration with Nautilus 3.2. This means, I can't right click on files and select an option to open them in Meld for comparison. I have seen in the tools comment that the tool need the diff-ext package to be installed. This package has been removed from Ubuntu universe, I am guessing because gtk 3.0. Even if I manually downloaded from source forge the diff-ext package, when I try to configure it the check fails with the message: checking for DIFF_EXT... configure: error: Package requirements (libnautilus-extension >= 2.14.0 gconf-2.0 >= 2.14.0 gnome-vfs-module-2.0 >= 2.14) were not met: No package 'libnautilus-extension' found No package 'gconf-2.0' found No package 'gnome-vfs-module-2.0' found Ok, so from this output I gather that indeed gtk 2 is being required to install the diff extension to nautilus. Now, my question is: Is there a possibility to integrate Meld into Nautilus? Or, are there any other diff based tool which integrate with current Nautilus? So gtk3 based. I am using Ubuntu 11.10 if there was any doubt so far. cheers and thanks in advance.

  Read the article

• ATI Radeon 5800 series dual monitor unity not 3D accelerated

  - by Victor S

  When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

  Read the article

• Why does running this program on 11.10 give a 'GLIBC_2.15 not found' error?

  - by RafLance

  I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

  Read the article

• Gigabyte u24f Touchpad (elantech) not detected

  - by user314973

  A new Ubuntu user here. I just installed Ubuntu 14.04 on my gigabyte U24F laptop. At first the touch-pad (I believe it's elantech) was working fine but one day I turned it off using fn+f10 key from the keyboard. The next day I could no longer turn it back on and it has since been undetected by the system. xinput returns Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Video Bus id=9 [slave keyboard (3)] ? Power Button id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] so there's no touch-pad detected. I'm using a USB mouse at the moment. Attempting to run synclient gives "Couldn't find synaptics properties. No synaptics driver loaded?" Things I've tried so far to no avail Reinstalling xserver-xorg-input-synaptics. Checking dconf.editor settings, touchpad is enabled. Booting into a live usb session, touchpad no longer even works in this case. (Does this mean a fresh install wouldn't even solve the problem?) Any help is greatly appreciated!

  Read the article

• How do I get a Belkin F5D8053 wireless adapter working?

  - by disassembler

  I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

  Read the article

< Previous Page | 573 574 575 576 577 578 579 580 581 582 583 584  | Next Page >