Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 579/607 | < Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >

• Enterprise Tape Backup solutions

  - by Tom O'Connor

  I'm currently attempting to re-architect a backup solution where I'm working. We've got 2 NAS devices, one in the office, one in the datacentre. The servers in the DC back up to the DC NAS, which is then replicated to the Office NAS. The office NAS exports shares as CIFS and NFS, this bit is fine. At some point, I'll have to expand our storage capacity, currently we've got about 1.4TB of storage space, which is about 96% full. Previously, the tape backup was a script that ran tar a few times and squirted data onto a tape. It worked, but was by no means a perfect solution. Restores are a bit of a pest, adding new data to the backup requires editing the script as root. It's just all a bit non-ideal. I've been evaluating a number of "enterprise" ready backup solutions, such as Yosemite Backup from Barracuda, Acronis Backup/Restore, and something from Arkeia. In the process of evaluating these, I've found 2 big problems. Not all of them allow backup of mounted devices (such as a NFS mounted NAS) Many of these applications don't like our tape device. For the most part, (1) is essential. Our NAS has a feeble processor and can't run applications like backup agents. I suspect that the biggest problem is the tape device, which is a HP C7438A DAT72 connected via USB. Questions: Has anyone else got an USB DAT72 device working with similar software? Is there a better way to back up data from an "appliance" NAS device on which you can't run an agent? Would I be totally out of my mind to specify a cheap HP or Dell server with a couple of 1TB hard disks, and a SAS card to then talk to an HP Ultrium (or similar) device? The biggest drawback to this would be cost (400ish for the server, 200 for the SAS connectivity and 1700 for a LTO4 device) Notes: I'd love to be able to say that I'd get rid of tapes entirely, and use some form of hard disk backup. In a previous job, we had LaCie USB drives, which were decidedly unreliable.

  Read the article

• Mounting a drive in Ubuntu 9.10 (Karmic Koala)

  - by morpheous

  I have just installed Ubuntu on a machine that previously had XP installed on it. The machine has 2 HDD (hard disk drives). I opted to install Ubuntu completely over XP. I am new to Linux, and I am still learning how to navigate teh file structure. However, AFAICT), there is only one drive. I want to be able to store programs etc on the first drive, and store data (program output etc) on the second drive. It appears Ubuntu is not aware that I have 2 drives (on XP, these were drives C and D). How can I mount the second drive (ideally, I want to do this automatically on login, so that the drive is available to me whenever I login - withou manual intervention from me) In XP, I could refer to files on a specific drive by prefixing with the drive letter (e.g. c:\foobar.cpp and d:\foobar.dat). I suspect the notation on ubuntu is different. How may I specify specific files on different drives? Last but notbthe least (a bit unrelated to previous questions). This relates to direcory structure again. I am a developer (C++ for desktops and PHP for websites), I want to install the following apps/ libraries. i). Apache 2.2 ii). PHP 5.2.11 iii). MySQL (5.1) iv). SVN v). Netbeans vi). C++ development tools (gcc, gdb, emacs etc) vii). QT toolkit viii). Some miscellaeous scientific software (e.g. www.r-project.org, www.gnu.org/software/octave/) I would be grateful if a someone can recommend a directory layout for these applications. Regarding development, I would also be grateful if someone could point out where to store my project and source files i.e: (i) *.cpp, *.hpp, *.mak files for cpp projects (ii) individual websites On my XP machine the layout for C++ dev was like this: c:\dev\devtools (common libs and headers etc) c:\dev\workarea (root folder for projects) c:\dev\workarea\c++ (c++ projects) c:\dev\workarea\websites (web projects) I would like to create a similar folder structure on the linux machine, but its not clear whether to place these folders under /, /usr, /home or swomewhere else (there seems to be abffling number of choices, so I want to get it "right" first time - i.e having a directory structure that most developer use, so it is easier when communicating with other ubuntu/linux developers)

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Windows: Impact of clean install Service Pack 2 to applications & data?

  - by Thomas Matthews

  My Windows Vista Home Premium system is corrupt and won't install Service Pack 2. I have followed all the advice from Microsoft and still no luck. I would like to perform a clean install of Vista, then SP1, and then SP2. My concern is the effect of the clean install on the registry, my apps and all my data. My plan: 1. Download Vista Service Pack 1 (SP1) ISO and write to DVD. 2. Download Vista Service Pack 2 (SP2) ISO and write to DVD. 3. Backup all data, applications and registry to external hard drive (file copy not disk image) 4. ?? Format hard drive?? (is this necessary?) 5. Install Vista from DVDs / CDs. 6. Install SP1 from DVD 7. Install SP2 from DVD 8. Restore registry, applications and data from external hard drive. My questions: 1. Is formatting the hard drive a necessary step? 2. Will restoring the registry from the backup corrupt the system? 3. Should I use Windows Backup or ZIP/RAR? 4. Any gotcha's that I should look out for? Background: I am using Windows Vista Home Premium with SP1. The sfc program does not finish due to a resources problem (even when run as administrator). I have 5 users on it. After a while, the screen goes black and shows an error message window about an error with login.scr. Standard accounts display a black screen and can't run any applications. Administrative accounts have no problems (even standard accounts when converted to Administrative have no problem). The CBS log contains a lot of 0x8000ffff and E_UNEXPECTED errors (which Microsoft defines as catastrophic failure). This is the reasoning behind performing a clean install up to service pack 2.

  Read the article

• Backing Up vs. Redundancy

  - by TK Kocheran

  I'm currently in stage 2 of 3 of building my home workstation. What this means is that my RAID-0 array of solid state disks will be backed up nightly to a RAID-5 or RAID-6 array of traditional spinning hard disks. However, it recently dawned on me that redundancy is not backup. The main reason for setting up a RAID array with redundancy was to protect myself in the event of a drive failure to serve as an effective backup solution. Wait. What if a bolt of lightning finds a way to travel into my house, through my surge-protector, into my power supply and physically destroys all of my hard disks and SSDs? Well, in that case, I guess I'd be fine because I generally keep most important files (music, pictures, videos) stored in multiple places like on my laptop, my wife's laptop, and an encrypted USB hard drive. Wait. What if a giant hedgehog meteor attacks my house from space traveling at mach 3 and all machines and hard disks are blown to smithereens. Well, I guess I could find a way to do ridiculously slow and cumbersome rsyncs or backups to Amazon's Glacier. Wait. What if there's a nuclear apocalypse... and at this point I start laughing hysterically. At what point does backing up become irrelevant? I completely understand situation one (mechanical drive failure), situation two (workstation compromised or destroyed somehow), possibly even situation three (all machines and disks destroyed), but situation four? There's no questioning the need for backups. None. However, there are three questions I'd really like addressed: To what level should one backup? I definitely understand the merits of physical disk redundancy. I also believe in keeping important files on multiple machines and thinning out the possibility of losing all of my files. Online backups make sense, but they beg the following question. What should I be backing up remotely and how often? It's no problem storage-wise to back up important files (music, pictures, videos) and even configuration and temporal data for all of the machines in my network (all Linux based)... albeit locally. Transferring to the cloud is another story. Worst-case scenario, if I lost all of my configuration for my individual computers, the reality is that I probably lost the machines too. The cloud is a long way away from here; I can run backups over CAT-6 here and see 100MB/s easily, but I'm afraid that I'm only going to see 2MB/s at best when transferring up to the cloud.

  Read the article

• Are file access times not properly maintained in Mac OS X?

  - by Ether

  I'm trying to determine how file access times are maintained by default in Mac OS X, as I'm trying to diagnose some odd behaviour I'm seeing in a new MBP Unibody (running Snow Leopard, 10.6.2): The symptoms (drilling down to the specific behaviour that seems to be causing the issue): mutt is unable to switch to mailboxes which have recently received new mail mail is delivered by procmail, which updates the mtime of the mbox folder it is updating, but does not alter the atime (this is how new mail detection works: by comparing atime to mtime) however, both the mtime and atime of the mbox file is getting updated Through testing, it does not appear that atimes can be set separately in the filesystem: : [ether@tequila ~]$; touch test : [ether@tequila ~]$; touch -m -t 200801010000 test2 : [ether@tequila ~]$; touch -a -t 200801010000 test3 : [ether@tequila ~]$; ls -l test* -rw------- 1 ether staff 0 Dec 30 11:42 test -rw------- 1 ether staff 0 Jan 1 2008 test2 -rw------- 1 ether staff 0 Dec 30 11:43 test3 : [ether@tequila ~]$; ls -lu test* -rw------- 1 ether staff 0 Dec 30 11:42 test -rw------- 1 ether staff 0 Dec 30 11:43 test2 -rw------- 1 ether staff 0 Dec 30 11:43 test3 The test2 file is created with an old mtime, and the atime is set to now (as it is a new file), which is correct. However, test3 is created with an old atime, but is not set properly on the file. To be sure this is not just behaviour seen with new files, let's modify an old file: : [ether@tequila ~]$; touch -a -t 200801010000 test : [ether@tequila ~]$; ls -l test -rw------- 1 ether staff 0 Dec 30 11:42 test : [ether@tequila ~]$; ls -lu test -rw------- 1 ether staff 0 Dec 30 11:45 test So it would seem that atimes cannot be set explicitly (it is always reset to "now" when either mtime or atime modifications are submitted). Is this something inherent to the filesystem itself, is it something that can be changed, or am I totally crazy and looking in the wrong place? PS. the output of mount is: : [ether@tequila ~]$; mount /dev/disk0s2 on / (hfs, local, journaled) devfs on /dev (devfs, local, nobrowse) map -hosts on /net (autofs, nosuid, automounted, nobrowse) map auto_home on /home (autofs, automounted, nobrowse) ...and Disk Utility says that the drive is of type "Mac OS Extended (Journaled)".

  Read the article

• Varnish, hide port number

  - by George Reith

  My set up is as follows: OS: CentOS 6.2 running on an OpenVZ virtual machine. Web server: Nginx listening on port 8080 Reverse proxy: Varnish listening on port 80 The problem is that Varnish redirects my requests to port 8080 and this appears in the address bar like so http://mysite.com:8080/directory/, causing relative links on the site to include the port number (8080) in the request and thus bypassing Varnish. The site is powered by WordPress. How do I allow Varnish to use Nginx as the backend on port 8080 without appending the port number to the address? Edit: Varnish is set up like so: I have told the Varnish daemon to listen to port 80 by default. VARNISH_VCL_CONF=/etc/varnish/default.vcl # # # Default address and port to bind to # # Blank address means all IPv4 and IPv6 interfaces, otherwise specify # # a host name, an IPv4 dotted quad, or an IPv6 address in brackets. # VARNISH_LISTEN_ADDRESS= VARNISH_LISTEN_PORT=80 # # # Telnet admin interface listen address and port VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1 VARNISH_ADMIN_LISTEN_PORT=6082 # # # Shared secret file for admin interface VARNISH_SECRET_FILE=/etc/varnish/secret # # # The minimum number of worker threads to start VARNISH_MIN_THREADS=1 # # # The Maximum number of worker threads to start VARNISH_MAX_THREADS=1000 # # # Idle timeout for worker threads VARNISH_THREAD_TIMEOUT=120 # # # Cache file location VARNISH_STORAGE_FILE=/var/lib/varnish/varnish_storage.bin # # # Cache file size: in bytes, optionally using k / M / G / T suffix, # # or in percentage of available disk space using the % suffix. VARNISH_STORAGE_SIZE=1G # # # Backend storage specification VARNISH_STORAGE="file,${VARNISH_STORAGE_FILE},${VARNISH_STORAGE_SIZE}" # # # Default TTL used when the backend does not specify one VARNISH_TTL=120 The VCL file that Varnish calls (through an include in default.vcl) consists of: backend playwithbits { .host = "127.0.0.1"; .port = "8080"; } acl purge { "127.0.0.1"; } sub vcl_recv { if (req.http.Host ~ "^(.*\.)?playwithbits\.com$") { set req.backend = playwithbits; set req.http.Host = regsub(req.http.Host, ":[0-9]+", ""); if (req.request == "PURGE") { if (!client.ip ~ purge) { error 405 "Not allowed."; } return(lookup); } if (req.url ~ "^/$") { unset req.http.cookie; } } } sub vcl_hit { if (req.http.Host ~ "^(.*\.)?playwithbits\.com$") { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } } sub vcl_miss { if (req.http.Host ~ "^(.*\.)?playwithbits\.com$") { if (req.request == "PURGE") { error 404 "Not in cache."; } if (!(req.url ~ "wp-(login|admin)")) { unset req.http.cookie; } if (req.url ~ "^/[^?]+.(jpeg|jpg|png|gif|ico|js|css|txt|gz|zip|lzma|bz2|tgz|tbz|html|htm)(\?.|)$") { unset req.http.cookie; set req.url = regsub(req.url, "\?.$", ""); } if (req.url ~ "^/$") { unset req.http.cookie; } } } sub vcl_fetch { if (req.http.Host ~ "^(.*\.)?playwithbits\.com$") { if (req.url ~ "^/$") { unset beresp.http.set-cookie; } if (!(req.url ~ "wp-(login|admin)")) { unset beresp.http.set-cookie; } } }

  Read the article

• Windows 7 file-based backup service

  - by Ben Voigt

  I'm looking for a good replacement for Lazy Mirror, since it doesn't support Windows 7 well. Pros: One of the things I really loved about Lazy Mirror is that it always maintains a "full" backup, but does so by only copying modified files. As each file was copied, the old version got archived (moved to an out-of-the-way location). So after mirroring ran, there'd be a complete copy of the file system, which could even be booted if necessary. At the same time, extra space on the backup media was used to store as many older versions of files as possible, without wasting space storing multiple copies of the same version. It seems that with Windows 7 backup, there'd be wasted space storing the same data in both the system image and file backup. It was completely file-based, but also aware of the registry (it had a feature to dump the live registry to hive files in the correct format). The backups were normal NTFS filesystems, no special tool was needed to read them. It automatically cleaned out the oldest previous versions when space ran out (unlike Windows 7 backup which apparently simply starts failing the the backup media fills.) It copied all file attributes including security. Cons: It doesn't deal well with junction points, symbolic links, and hard links. It didn't run as a service without lots of help from firesrv or srvany, and then you couldn't interact with the GUI. Running as a service was necessary to be able to mirror protected OS files. It didn't have open file handling, except for registry hives. I guess that the file-by-file archive and replacement could leave mismatched sets of files, if the mirror was interrupted. This would be the advantage of incremental backup techniques that require old full backup + all intermediate incremental backups to restore. But I don't see this as presenting much of a problem, you'd really only have a boot failure if you had a mixture of pre- and post-service pack files, and I can run a full image backup using another tool before applying a service pack. Does anyone know of a tool that does both full-system backup and storage of old versions of files like Lazy Mirror did (without storing the same data multiple times), and also can run as a service in Windows 7? Free is best of course, but a reasonably priced paid program (e.g. It would be absolutely awesome if it also triggered a backup/mirror pass when a particular external drive was plugged in and generated popup warnings if backups hadn't been run recently)

  Read the article

• How to bind old user's SID to new user to remain NTFS file ownership and permissions after freshly reinstall of Windows?

  - by LiuYan ??

  Each time we reinstalled Windows, it will create a new SID for user even the username is as same as before. // example (not real SID format, just show the problem) user SID -------------------- liuyan S-old-501 // old SID before reinstall liuyan S-new-501 // new SID after reinstall The annoying problem after reinstall is NTFS file owership and permissions on hard drive disk are still associated with old user's SID. I want to keep the ownership and permission setting of NTFS files, then want to let the new user take the old user's SID, so that I can access files as before without permission problem. The cacls command line tool can't be used in such situation, because the file does belongs to new user, so it will failed with Access is denied error. and it can't change ownership. Even if I can change the owership via SubInACL tool, cacls can't remove the old user's permission because the old user does not exist on new installation, and can't copy the old user's permission to new user. So, can we simply bind old user's SID to new user on the freshly installed Windows ? Sample test batch @echo off REM Additional tools used in this script REM PsGetSid http://technet.microsoft.com/en-us/sysinternals/bb897417 REM SubInACL http://www.microsoft.com/en-us/download/details.aspx?id=23510 REM REM make sure these tools are added into PATH set account=MyUserAccount set password=long-password set dir=test set file=test.txt echo Creating user [%account%] with password [%password%]... pause net user %account% %password% /add psgetsid %account% echo Done ! echo Making directory [%dir%] ... pause mkdir %dir% dir %dir%* /q echo Done ! echo Changing permissions of directory [%dir%]: only [%account%] and [%UserDomain%\%UserName%] has full access permission... pause cacls %dir% /G %account%:F cacls %dir% /E /G %UserDomain%\%UserName%:F dir %dir%* /q cacls %dir% echo Done ! echo Changing ownership of directory [%dir%] to [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q echo Done ! echo RunAs [%account%] user to write a file [%file%] in directory [%dir%]... pause runas /noprofile /env /user:%account% "cmd /k echo some text %DATE% %TIME% > %dir%\%file%" dir %dir% /q echo Done ! echo Deleting and Recreating user [%account%] (reinstall simulation) ... pause net user %account% /delete net user %account% %password% /add psgetsid %account% echo Done ! %account% is recreated, it has a new SID now echo Now, use this "same" account [%account%] to access [%dir%], it will failed with "Access is denied" pause runas /noprofile /env /user:%account% "cmd /k cacls %dir%" REM runas /noprofile /env /user:%account% "cmd /k type %dir%\%file%" echo Done ! echo Changing ownership of directory [%dir%] to NEW [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q cacls %dir% echo Done ! As you can see, "Account Domain not found" is actually the OLD [%account%] user echo Deleting user [%account%] ... pause net user %account% /delete echo Done ! echo Deleting directory [%dir%]... pause rmdir %dir% /s /q echo Done !

  Read the article

• Configuring gmail for use on mailing lists

  - by reemrevnivek

  This is really two questions in one. First, are nettiquette guidelines still accurate in their restrictions on ASCII vs. HTML, posting style, and line length? (Here's a recent metafilter discussion of the topic.) Second, If they are not, should these guidelines be respected? If they are (or if they should still be respected), how can modern mail programs be configured to work properly with them? Most mailing list etiquette statements appear to have been written by sysadmins who loved their command lines, and refuse to change anything. Many still reference rfc1855, written in 1995. Just reading that paginated TXT should give you an idea of the climate at the time. Here's a short, fairly random list of mailing list etiquette statements with some extracted formatting guidelines: Mozilla - HTML discouraged, interleaved posting. FreeBSD - No HTML, don't top post, line length at 75 characters. Fedora - No HTML, bottom-post. You get the idea. You've all seen etiquette statements before. So, assuming that the rules should be obeyed (Usually a good idea), what can be done to allow me to still use a modern mail program, and exchange mail with friends who use the same programs? We like to format our mail. Bold headings, code snippets (sometimes syntax highlighted, if the copy-paste pulls RTF text as from XCOde and Eclipse), free line breaks determined by your browser width, and the (very) occasional image make the message easier to read. Threaded conversations are a wonderful thing. Broadband connections are, I'm sure, the rule for most of the users of SU and of developer mailing lists, disk space is cheap, and so the overhead of HTML is laughable. However, I don't want to post a question to a mailing list and have the guru who can answer my question automatically delete it, or come off as uncaring. Until I hear otherwise, I'll continue to respect the rules as best I can. For a common example of the problem, Gmail, by default, sends HTML formatted messages with bottom-posted quotes (which are folded in, just read the last message immediately above), and uses the frame width to wrap lines, rather than a character count. ASCII can be selected, and quotes can be moved and reversed, but line wraps of quotes don't work, line breaks are tedious to add (and more tedious to read, if they're super small in comparison to the width of the frame). Is there a forwarding, free mail program which can help with this exercise? Should an "RFC1855 mode" lab be written? Or do I have to go to the command line for my mailing lists, and gmail for my other mail?

  Read the article

• Debugging IO limitation

  - by Martin F

  I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

  Read the article

• Fast user switching suddenly stopped working on my Windows XP Prof machine

  - by John

  When I start Win XP SP2 I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups is listed. I did a windows repair with no luck. I tried doing restore points but it said they didn’t work. Please help? My wife and I have been using fast user switching on out computer for years with no problem. Beginning a few months ago, I started Win XP Prof one day I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows with an account of owner. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups are listed. I have done system point restores and imports of exports of the registry I take with import. I have tried everything under safe mode and it makes no difference. This followed a Microsoft update the night before as I left the computer on. I tried to do a restore point but all my restore points failed and could not backout the MS updates. I was working with a fellow from Microsoft and he had me do all kinds of things but to no avail. He seems to think a DLL file is corrupt but which one? Finally in desperation he sent me a new OS XP Prof SP3 disk and I installed it and it wiped my hard drive. Luckily I took an Acronis Image backup first so I easily restored my system. I do not want to do a fresh windows update as it is heavily customized and worked fine up to that point. This has been going on for months, Thanks John

  Read the article

• Further Performance Tuning on Medium SharePoint Farm?

  - by elorg

  I figured I would post this here, since it may be related more to the server configuration than the SharePoint configuration or a combination of both? I'm open for ideas to try, or even feedback on things that maybe have been configured incorrectly as far as performance is concerned. We have a medium MOSS 2007 install prepped and ready for receiving the WSS 2003 data to upgrade. The environment was originally architected by a previous coworker, and I have since added a few configuration modifications to assist with performance before we finally performed the install. When testing the new site collections & SharePoint install (no actual data yet), things seemed a bit slow. I had assumed that it was because I was accessing it remotely. Apparently the client is still experiencing this and it is unacceptably slow. 1 SQL Server running SQL Server 2008 2x SharePoint WFEs - hosting queries (no index) 1x SharePoint Index - hosting index (no queries) MOSS 2007 installed and patched up through December '09 on WFEs & Index All 4 servers are VMs, should have more than sufficient disk space & RAM (don't recall at the moment), and are running Windows Server 2008 - everything is 64-bit. The WFEs have Windows NLB configured, with a DNS name & IP for the NLB cluster. Single NIC on each server (virtual, since VMWare). The Index server is configured as a WFE (outside of the NLB cluster) so that it can index itself and replicate the indexes to the WFEs that will serve the queries. Everything is configured & working properly - it just takes a minute or two to load a page on the local LAN. The client is still using their old portal (we haven't started the migration/upgrade just yet) so there's virtually no data or users. We need to either further tune the configuration, or fix anything that may have been configured incorrectly which is causing this slowness? I've already reviewed & taken into account everything that I could find that was relevant before we even started the install. Does anyone have ideas or pointers? Perhaps there's something that I've missed?

  Read the article

• Splunk is fantastically expensive: What are the alternatives? [closed]

  - by samsmith

  Possible Duplicate: Alternatives to Splunk? This has been discussed, but it has been several months, so it may be time to revisit it: Earlier discussion RE Splunk alternatives For the record, Splunk rocks. But the pricing is simply beyond what we can consider (When I spoke with Splunk today, the cost for a system to index 5gb/day of data is over $30,000.) That is more than we spend on SQL Server (by a large multiple), more than we spend on a rack of servers (by a multiple), etc. etc. The splunk sales team is correct (that for $30K we get more value and functionality than if we spend the same building our own system), but it doesn't matter. The splunk cost is simply too high (by a multiple). Soooooo, we are looking around! Is anyone out there building a splunk like system? Our basic need: Able to listen for syslog messages on multiple udp ports Able to index the incoming data in an async way Some kind of search engine Some kind of UI An API to the search engine (to embed in our console) We currently need to index 3-5gb/day, but need to be able to scale to 10gb/day or more. We do not need a lot of history (30 days is fine). We use Windows 2008 and 2003 servers. Thanks for your thoughts! UPDATE: We spent two weeks researching commercial and open source options. Our conclusion: Write our own (we are a software company... we know how to write things). We built a great system built on mongodb and .NET that gives us the functions we needed from MongoDB in about one engineering week. We have now completed our implementation. We use two Mongodb servers (master and slave), and are able to log and index any amount of log data (5gb/day, 15gb/day, etc), limited only by disk space. OBSERVATIONS: This space needs a solid solution that is $1000-3000 flat rate. The licensing models used by the commercial firms are based on a "milk the data center ops guys" models. That is their right (of course!), but it leaves a HUGE space open for someone to come in underneath them. My guess is that in another year or two there will be a good open source solution that will be really usable. Thank you all for your input (even if it was self promotion).

  Read the article

• GeForce 8800GT not even giving basic output

  - by Sam

  My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

  Read the article

• Custom built machine has much higher power consumption than expected

  - by foraidt

  I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

  Read the article

• Suspend only works once after full power cycle with ASUS P7P55D-E Pro

  - by John Chadwick

  This one is strange. I can't seem to get suspend working more than once per power cycle. When I say "power cycle," I mean the only way to get one proper suspend is to cut power from the power supply and boot back up cold. After the proper suspend, I get a failed suspend, and after all reboots or cold boots until power is cut, suspends fail. I'm using an ASUS P7P55D-E Pro with a Sandy Bridge Core i7, running on Ubuntu Precise repositories and UEFI. I'm running Nouveau from repository (And Gallium3d compiled from git, but that does not come into this since I can avoid OpenGL and it still happens the same way) with a GTX 285 (nv50.) I had to build a custom kernel (3.3) in order for ACPI 5.0 to be supported and make suspend work at all. I compiled it using the latest Ubuntu kernel's config file with the additional entries set to the default options. All packages are up to date. I know these are relatively exotic settings, but I'm hoping maybe I can get some help anyways. The behavior when suspend fails is strange. Upon a proper suspend, all fans turn off and the only led left on, the power led, is blinking. Upon a failed suspend, 1. USB power remains. 2. The power led stays on solid. 3. All fans seem to still be on. 4. I can hear what I believe is the primary harddrive shutting off. 5. Despite USB power remaining, the USB powered keyboard does not respond to anything, and the indicator leds on it shut off. Pressing the power button does nothing, and of course I have not to date found a way to wake it up. When trouble shooting the first round of issues I got with suspend not too long ago, I ended up building a list of modules to disable upon sleeping. Here's my config file for them: In /etc/pm/config.d/01modules: SUSPEND_MODULES="uhci_hd ehci_hd button" All of my other pm configuration files are stock. In case it's any help, here are my relevant BIOS settings. Thanks.

  Read the article

• USB Flash not recognised by Windows and BIOS, but works fine in Linux

  - by bbalegere

  I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

  Read the article

• Buying a new printer instead of replacing ink?

  - by Kelsey

  With prices of basic printers being around $40 - $50 and a ink cartridge being around $20 - $30 each for black AND color. It costs me more to replace the printer's ink than to just buy a brand new printer. This just seems like a total waste of materials though (I have 4 printers sitting in my basement with no ink). I know the ink cartridges are smaller (not as full) in a new printer but I go through it in about 1 to 1.5 years only and by then my $40 gets me a better printer to boot. Also with certain printers the heads are not part of the ink (Epson use to do this and still might) so I get new heads as well. Is this a bad practice? Are retailers making this a reality when they are selling working hardware cheaper than replacement parts? Is there something more I should be considering? Edit: Some background, long ago I bought an Epson printer which I used to print docs etc vary rarely. The ink started running low so I bought to new carts for around $60 if I recall. The printer then stopped working so I replaced the carts with the new ones but the head was dead on the black which was not worth repairing. I bought a new HP printer for $49. This lasted around 1.5yrs and then the ink ran out, I went to buy new carts and the guy at the store got me to buy a new printer (that was smaller, faster, higher dpi, etc) and it was cheaper than replacing the ink. When the ink ran out on that one I bought a new printer again, etc. The printer gets used maybe once a week at most and I never print photos or anything. It normally is jsut stored away unplugged accumulating dust. People say to buy a laser printer but they are much larger, do not print color, (in the price range I am looking at) and might have the exact same issues. The problem I see is the manufacturer is making my behaviour possible by selling new printers at a loss hoping that they will cash in on the ink later. How can they produce a printer for so cheap which HAS ink in it, and the refills cost more than the unit? It can't.

  Read the article

• mint linux, DVD drive keeps randomly being accessed. unsure how to find culprit

  - by juicebox

  I have a workstation with mint linux 12. It seems like the DVD drive on the machine keeps randomly "activating". By activating it makes noise, the light turns on, and it seems like it is checking if a disk is in it. At first I thought I was being hacked and someone/something was trying to check if I had media in the DVDRom drive. I ruled that out with netstat and rkhunter. I checked my logs and the only thing I can find that might help point out the problem are these repeated chunks in syslog: Mar 24 17:47:31 rich-MINT kernel: [ 9846.551422] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in Mar 24 17:47:31 rich-MINT kernel: [ 9846.551424] res 51/40:01:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) Mar 24 17:47:31 rich-MINT kernel: [ 9846.551427] ata2.00: status: { DRDY ERR } Mar 24 17:47:31 rich-MINT kernel: [ 9846.551433] ata2.00: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9846.868012] ata2.01: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9847.344054] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:47:32 rich-MINT kernel: [ 9847.344067] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:47:32 rich-MINT kernel: [ 9847.376118] ata2.00: configured for PIO0 Mar 24 17:47:32 rich-MINT kernel: [ 9847.393047] ata2.01: configured for UDMA/133 Mar 24 17:47:32 rich-MINT kernel: [ 9847.397046] ata2: EH complete and again Mar 24 17:55:28 rich-MINT kernel: [10323.633268] sr 1:0:0:0: ioctl_internal_command return code = 8000002 Mar 24 17:55:28 rich-MINT kernel: [10323.633270] : Sense Key : Aborted Command [current] [descriptor] Mar 24 17:55:28 rich-MINT kernel: [10323.633275] : Add. Sense: No additional sense information Mar 24 17:55:11 rich-MINT kernel: [10306.640009] ata2.00: link is slow to respond, please be patient (ready=0) Mar 24 17:55:16 rich-MINT kernel: [10310.840009] ata2.00: SRST failed (errno=-16) Mar 24 17:55:16 rich-MINT kernel: [10310.840016] ata2.00: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.160013] ata2.01: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.636061] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:55:16 rich-MINT kernel: [10311.636075] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:55:16 rich-MINT kernel: [10311.668122] ata2.00: configured for PIO0 Mar 24 17:55:16 rich-MINT kernel: [10311.684854] ata2.01: configured for UDMA/133 Mar 24 17:55:17 rich-MINT kernel: [10312.105473] ata2: EH complete (Copied from Pastebin - http://pastebin.com/YNDrnyzH) If any linux masters could take a quick look at these log outputs and help me understand what is going on , much appreciated.

  Read the article

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• Brand new Mac Pro tower fan suddenly runs full-tilt

  - by Caffeine Coma

  My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

  Read the article

• File Not Found error launching Guest OS in a non-administrator user account

  - by ToreTrygg

  Hi, I am running Fusion 2.0.6 (196839) on an iMac running 10.6.2 with 3 user accounts (1 Administrator). I have Fusion set up to share the Guest OS, and it's been working splendidly for nearly a year. Within the Guest OS (Windows XP PRO), there are also 3 user accounts (1 Administrator). Last night I went to back up my VM to an external drive, and to minimize the file size and transfer time, I deleted all Snapshots but the most-recent one. I then backed up the VM externally (28.23 GB). Today, one of my users tried to launch the Guest OS from within her user account, and received the following error message: "File Not Found: Windows XP Pro-000006.vmdk "This file is required to power on this virtual machine. If this file was moved, please provide its new location." My two choices are Cancel and Browse. When I browse, I can locate the Windows XP Pro-000006.vmdk file, which appears to be contained within the VM file (Windows XP Pro.vmwarevm). However, it still won't launch from a non-Admin user account. If I view the package contents of the VM file from the user account, the above file is present and appears to be created upon each launch of the Guest OS. If I go back to my Administrator account on the Mac and then launch Fusion, the Guest OS works perfectly for all 3 user accounts within XP Pro. I have tried to delete the Guest OS from Fusion's Library within the problem user account, then re-connect it to that Library, but the result is the same. The Guest OS data integrity is 100% -- but is accessible only from the OS X Administrator account. This problem only surfaced after deleting several older Snapshots. Again, the data is there, the Guest OS powers up normally in the Mac's Administrator account, but persistently returns the above error when attempting to power on from a non-Admin account on the Mac. I'm not sure how this is affecting the error, but when I look at Hard Disk Settings, the "unable-to-locate" file is the filename of the virtual HD. I don't want to make any changes to my (working) VM without any advice from the knowledgeable people on this forum. Any help will be greatly appreciated, thanks!

  Read the article

• PC freezing when used to print labels

  - by Will

  Hi I have a windows XP machine that is used to print labels from a Zebra label printer. It is connected a member of the domain. I am getting reports that when people try to use the computer it will sometimes be frozen to the point where they have to physically shut the machine down and boot to get it responding. (this happens about once a day). I took a look in Event Viewer and nabbed some of these errors out of it: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 11/12/2010 Time: 9:13:04 AM User: NT AUTHORITY\SYSTEM Computer: FS-LABELMACHINE Description: Windows cannot obtain the domain controller name for your computer network. (A socket operation was attempted to an unreachable host. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 11/11/2010 Time: 11:08:25 PM User: N/A Computer: FS-LABELMACHINE Description: Automatic certificate enrollment for local system failed to contact the active directory (0x80072751). A socket operation was attempted to an unreachable host. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Hanging application MSACCESS.EXE, version 11.0.8166.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.... SearchIndexer (2420) Unable to write a shadowed header for file C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.chk. Error -1032. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txt> with error: A connection with the server could not be established For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'm not really sure what to make out of this... Thanks for the help in advanced, Will

  Read the article

• Trouble with Debian Lenny and Sphinx

  - by Ando

  I've very basic understanding of linux systems, but I've a server which was setup a while ago to host some web apps. Recently I decided to test out and implement Sphinx but unfortunately I cant get the install to work. I'm running a Debian Lenny distro and when I try to install sphinx it says - checking MySQL include files... configure: error: missing include files. ****************************************************************************** ERROR: cannot find MySQL include files. Check that you do have MySQL include files installed. The package name is typically 'mysql-devel'. If include files are installed on your system, but you are still getting this message, you should do one of the following: 1) either specify includes location explicitly, using --with-mysql-includes; 2) or specify MySQL installation root location explicitly, using --with-mysql; 3) or make sure that the path to 'mysql_config' program is listed in your PATH environment variable. To disable MySQL support, use --without-mysql option. ****************************************************************************** I do have mysql 5.1 installed but I can't find the include files, AND one more thing.. I read around the net that I probably need libmysqlclient15-dev but when I try to install that using apt-get i receive the following error. The following packages were automatically installed and are no longer required: libxcb-aux0 libts-0.0-0 libxcb-atom1 ttf-dejavu-extra hunspell-en-us g++-4.3 libmysql++3 libnspr4-0d libdirectfb-1.0-0 libxcb-event1 libasound2 libstdc++6-4.3-dev libhunspell-1.2-0 ttf-dejavu libmozjs2d conkeror-spawn-process-helper libnss3-1d Use 'apt-get autoremove' to remove them. The following NEW packages will be installed: libmysqlclient15-dev 0 upgraded, 1 newly installed, 0 to remove and 276 not upgraded. Need to get 7590 kB of archives. After this operation, 26.3 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmysqlclient15-dev Install these packages without verification [y/N]? Y Err http://ftp.us.debian.org/debian/ lenny/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 35.9.37.225 80] Err http://security.debian.org/ lenny/updates/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 149.20.20.6 80] Failed to fetch http://security.debian.org/pool/updates/main/m/mysql-dfsg-5.0/libmysqlclient15-dev_5.0.51a-24+lenny5_amd64.deb 404 Not Found [IP: 149.20.20.6 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Can you help me out by suggesting how to install the required packages and run the Sphinx.

  Read the article

< Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >