Search Results

Search found 16793 results on 672 pages for 'sharepoint services'.

Page 581/672 | < Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >

• The Message Queuing service failed to join the computer's domain 'DOMAIN' Error 0xc00e0025

  - by SimonGoldstone

  Struggling to get MSMQ installed in Domain Integration mode on Windows 2012 (Azure). So far, I've provisioned a brand new Windows Server 2012 (R2) machine on the Azure platform and installed the Active Directory role and promoted the machine to a domain controller. Once the AD was in place, I then added the MSMQ feature, along with the Directory Integration add on. However, it will not install in AD integration mode. It will only work in Workgroup mode. I can verify this by running the following powershell command: New-MSMQQueue -name Queue1 -queuetype Public When I run this command, I get the following error: New-MsmqQueue : A workgroup installation computer does not support the operation. The event viewer reveals to errors in the Application log: 1. The Message Queuing service failed to join the computer's domain 'DOMAIN'. Error 0xc00e0025: 2. Message Queuing was unable to create the msmq (MSMQ Configuration) object in Active Directory Domain Services. Error c00e0025h: I'm struggling here. Any advice?

  Read the article

• Replication of lockoutTime attribute is not urgent on AD-LDS

  - by ixe013

  I have two LDS servers on the same subnet. They replicate well. If I change an attribute, it gets replicated after 15 seconds. LDS is configured to honor password policies. When a user makes too many wrong password attemps, his account is locked and that user's lockoutTime attribute is set accordingly. But lockoutTime is not replicated as urgent. In fact, it is not replicated unless there is another change somewhere in the directory. The lockoutTime attribute will be replicated. Here is an (edited Wireshark) trace. It shows normal replication trafic No. Time Protocol Length Info 133 16:23:02 DRSUAPI 562 DsGetNCChanges request 134 16:23:02 DRSUAPI 3042 DsGetNCChanges response 152 16:23:17 DRSUAPI 562 DsGetNCChanges request 157 16:23:17 DRSUAPI 242 DsGetNCChanges response 230 16:24:57 DRSUAPI 562 DsGetNCChanges request 231 16:24:57 DRSUAPI 2930 DsGetNCChanges response 246 16:25:12 DRSUAPI 562 DsGetNCChanges request Right after that, I lock the user (with a FOR loop and ldifde). Nothing happens, until I give up and change the description attribute on the user, then about 15 seconds later I see the replication go through. 1984 16:31:05 DRSUAPI 562 DsGetNCChanges request 1985 16:31:05 DRSUAPI 2930 DsGetNCChanges response The lockoutTime and description is replicated. As stated here, if I set lockoutTime to 0, replication occurs after 15 seconds ! I have enabled replication diagnostics, but nothing shows up in the instance's logs - strange. I have enabled change notification between sites, restarted both services, but I did not see any changes. How can I make the lockoutTime replication urgent ?

  Read the article

• Configuring external SMTP server on Azure VM - messages staying in queue

  - by Steph Locke

  I have an external SMTP provider: auth.smtp.1and1.co.uk I am trying to send SQL Server Reporting Services emails via this on an Windows 2012 Azure VM. It is configured sufficiently correctly for emails to be generated, but I've not configured something or mis-configured something as the emails then stay in the queue. Setup details Configured SMTP Virtual Server General: IP Address: Fixed value Access: Access Control: Authentication: ticked Anonymous access Access: Connection Control: All except the list below (which is empty) Access: relay restrictions: Only the list below (which contains 127.0.0.1), ticked 'allow all..' option Delivery: Outbound Security...:Basic Authentication with username and password completed, ticked TLS encryption Delivery: Outbound connections...:TCP port=587 Delivery: Advanced: FQDN=ServerName, smarthost=auth.smtp.1and1.co.uk I then set the following SSRS rsreportserver.config values: <SMTPServer>100.92.192.3</SMTPServer> <SendUsing>2</SendUsing> <SMTPServerPickupDirectory> c:\inetpub\mailroot\pickup </SMTPServerPickupDirectory> <From>[email protected]</From> Tried so far 1) turning the smtp service off and on again (just in case) 2) run SMTPDiag with no errors (also no emails) 3) tried turning off the firewall for the ports (and more generally to see if it made a difference) 4) tried generation from powershell which resulted with message in queue 5) added 25 and 857 as endpoint 6) perused the event log and found some warnings that appear to be about the recipient Message delivery to the remote domain 'gmail.com' failed for the following reason: Unable to bind to the destination server in DNS. Message delivery to the host '212.227.15.179' failed while delivering to the remote domain 'gmail.com' for the following reason: The remote server did not respond to a connection attempt. 7) tried pinging but this appears to be blocked on azure 8) tried more powershell sending on different domains variants (localhost, boxname, internal ip used in smtp properties, 127.0.0.1) - none resulting in success 9) tried adding a remote domain - no change Could anyone recommend what step 10 should be in fixing this issue please?

  Read the article

• Moving from ColdFusion 8 to ColdFusion 10 - Migration Fails

  - by XenoFoxx

  After having made several attempts to migrate from a ColdFusion 8 Standard server to a ColdFusion 10 Standard server, it feels like I am "almost" there. I'm using the 64 bit installer from Adobe's website. I'm using a Windows Server 2008 (64 bit) server with IIS 7.0. The installation itself goes smooth and the services start and are running. But at the end of the installation it says "ColdFusion Installed, but with errors" and it generates a log file. The log file reads: Migration Error: : Check that "C:\ColdFusion8" is a valid directory and is an installation of either ColdFusion MX 6 or ColdFusionMX 7 and further down says: Status: WARNING Additional Notes: WARNING - Could not migrate settings from previous version of ColdFusion Custom Action: com.macromedia.ia.action.MigrateColdFusionAction Status: ERROR Additional Notes: ERROR - class com.macromedia.ia.action.MigrateColdFusionAction NonfatalInstallException null The applicationHost.config file has new XML referencing the ColdFusion 10 directory, but IIS is still using ColdFusion 8. I'm also going to guess that the settings in the CF Administrator have not been migrated based on the message in the log above. I've followed the instructions on Adobe's site, including ensuring that ASP.NET, CGI, ISAPI Extensions, and ISAPI Filters are all enabled. I've also enabled IIS 6 Metabase Compatibility even though I don't think it's needed. Has anyone else had similar issues with ColdFusion 10 and IIS 7. Currently I have uninstalled CF 10 and reverted back to

  Read the article

• Windows Server 2003 R2 Terminal Server : Internet Explorer Enhanced Security won't disable for Users

  - by Tubs

  The Internet Explorer Enhanced Security (IEES) won't disable using the normal method of disabling it from the Add/Remove Programs/Windows components. This came to light immediately after testing. IEES was disabled after Terminal Services were installed for admin and users, and after IE8 was installed. My initial thoughts were that there was some clash between IE8 and IE6 (which is the default on 2003 R2), so I uninstalled IE8 and reverted back to IE6. The same symptoms were displayed, when a normal user logged on Internet Explorer Enhnaced Security was enforced. I then thought it could be a problem that Terminal Server wasn't recognising the removal as IEES was on when initially installed. I uninistalled the Terminal Server Componants using the server roles, and then reactivated and deavtived IEES. Windows Server 2003 R2 allows a limited number of users to connect to RDP by default, so I logged on as a normal user, and IEES was disabled. I then reinstalled Terminal Server, and logged on as a normal user. IEES was back enabled. Why is this?

  Read the article

• Exchange 2010 add mailbox server to DAG error

  - by Michael

  Hello, i'm having some problems when adding a second mailbox server to my DAG in Exchange 2010. The test setup goes like this: 1x windows server 2008 (DC/DNS) 2x windows server 2008 (Exchange 2010) I have made sure all services are up and running and that the "Exchange Trusted Subsystem" account is set as a local admin. When i create a DAG i can add the first mailbox server (A) without any problems, but when i go to add the second (B) it gives me an error saying "Unable to contact the Cluster service on 1 other members (member) of the Database availability group. It does the same if i add (B) first and then try to add (A). Here is a part of the log file: [2010-04-05T15:00:27] GetRemoteCluster() for the mailbox server failed with exception = An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(EXCHANGE20102.area51.com) failed with 0x6d9. Error: There are no more endpoints available from the endpoint mapper"' failed.. This is OK. [2010-04-05T15:00:27] Ignoring previous error, as it is acceptable if the cluster does not exist yet. [2010-04-05T15:00:27] DumpClusterTopology: Opening remote cluster AREA51DAG01. [2010-04-05T15:00:27] DumpClusterTopology: Failed opening with Microsoft.Exchange.Cluster.Replay.AmClusterApiException: An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(AREA51DAG01.area51.com) failed with 0x5. Error: Access is denied"' failed. --- System.ComponentModel.Win32Exception: Access is denied --- End of inner exception stack trace --- Any help would be really appreciated, thanks.

  Read the article

• How to disable windows server 2008 timestamp response

  - by Cal

  Posted this question on stackoverflow but then got instructed to post it here: I was using Rapid7's Nexpose to scan one of our web servers (windows server 2008), and got a vulnerability for timestamp response. According to Rapid7, timestamp response shall be disabled: http://www.rapid7.com/db/vulnerabilities/generic-tcp-timestamp So far I have tried several things: Edit the registry, add a "Tcp1323Opts" key to HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, and set it to 0. http://technet.microsoft.com/en-us/library/cc938205.aspx Use this command: netsh int tcp set global timestamps=disabled Tried powershell command: Set-netTCPsetting -SettingName InternetCustom -Timestamps disabled (got error: Set-netTCPsetting : The term 'Set-netTCPsetting' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.) None of above attempts was successful, after re-scan we still got the same alert. Rapid7 suggested using a firewall that's capable of blocking it, but we want to know if there is a setting on windows to achieve it. Is it through a specific port? If yes, what is the port number? If not, could you suggest a 3rd party firewall that is capable of blocking it? Thank you very much.

  Read the article

• Event ID: 861 - The Windows Firewall has detected an application listening for incoming traffic

  - by Chris Marisic

  Firstly, my machines aren't compromised any person suggesting such will be DV'd. The security logs on some of my networks client machines (all Windows Xp Sp3) get filled with these useless error messages. Security Failure Audit Detailed Tracking Event ID: 861 User: NT AUTHORITY\NETWORK SERVICE The Windows Firewall has detected an application listening for incoming traffic. Name: - Path: C:\WINDOWS\system32\svchost.exe Process identifier: 976 User account: NETWORK SERVICE User domain: NT AUTHORITY Service: Yes RPC server: No IP version: IPv4 IP protocol: UDP Port number: 55035 Allowed: No User notified: No It's always on various random ports of UDP so setting up a port exception isn't really an option. It's always from svchost or lsass both of which are running services from DLLs. One of the most offending processes seems to the be DnsCache. I have in my global policy under AT < Network < Network Connection < Widnows Firewall < Domain Profile (I haven't changed any standard profile options do both need configured? To allow remote administration and desktop exceptions and have a custom program exception list that has %SystemRoot%\system32\svchost.exe:*:enabled:svchost (Windows won't allow you to add this exception on a local machine but it let me have it on here in the global policy it just doesn't seem to do anything) %SystemRoot%\system32\lsass.exe:*enabled:lsass (I think this one ended all of my LSASS messages) %SystemRoot%\system32\dnsrslvr.dll:*:enabled:dnscache (I tried adding the dll itself to the exception list, this didn't seem to do anything) Is there really any other options left other than disabling the Windows Firewall entirely, disabling auditing entirely or just changing the event viewer to just auto overwrite when needed? I'd much rather fix the problem and get rid of these entries ever being created instead of just trying to cover up the problem.

  Read the article

• SSL certificate on IIS 7

  - by comii

  I am trying to install a SSL certificate on IIS 7. I have download a free trial certificate. After that, this is the steps what I do: Click the Start menu and select Administrative Tools. Start Internet Services Manager and click the Server Name. In the center section, double click on the Server Certificates button in the Security section. From the Actions menu click Complete Certificate Request. Enter the location for the certificate file. Enter a Friendly name. Click OK. Under Sites select the site to be secured with the SSL certificate. From the Actions menu, click Bindings.This will open the Site Bindings window. In the Site Bindings window, click Add. This opens the Add Site Binding window. Select https from the Type menu. Set the port to 443. Select the SSL Certificate you just installed from the SSL Certificate menu. Click OK. This is the step where I get the message: One or more intermediate certificates in the certificate chain are missing. To resolve this issue, make sure that all of intermediate certificates are installed. For more information, see http://support.microsoft.com/kb/954755 After this, when I access the web site on its first page, I get this message: There is a problem with this website's security certificate. What am I doing wrong?

  Read the article

• I cant get rid of apache2

  - by DaNieL

  It's obvious that I am a newbie with server amministration, my goal is to reach the knowledge needed to working with web services. I played with my debian server, and i messed up apache2; Now i want to completely* remove it from the server and then reinstall it as new. *for completely i really mean completely, logs, configurations, settings, everythings! I followed the steps suggested by freedom_is_chaos in this answer, and i guess apache2 is nomore installed, becose if i do apt-get remove apache2 i get this: Reading package lists... Done Building dependency tree Reading state information... Done Package apache2 is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 11 not upgraded. Then, i rebooted the server, and: # netstat -plant Active Internet connections (servers and established) [...] tcp6 0 0 :::80 :::* LISTEN 3467/apache2 [...] WTF? is apache2 still here? So seem: # /etc/init.d/apache2 stop Stopping web server: apache2. But: # update-rc.d remove apache2 update-rc.d: /etc/init.d/remove: file does not exist So, what is happening to my server? How can i completely and truly remove apache2 from my server?

  Read the article

• pGina with automatic Kerberos ticket and OpenAFS token/ticket

  - by rolands

  I am currently updating our educational Windows lab images from XP to 7, In doing so we are also migrating from Comtarsia to pGina. Unfortunately somewhere in the transition our automation that fetched kerberos and OpenAFS tickets/tokens on login has completely stopped functioning. Basically what used to happen was, using kfw-3.2.2 and the old OpenAFS release (loopback adapter days), either comtarsia would share password or something with the NIM (Network Identity Manager) which would authenticate against the kerberos server gaining a ticket and AFS token needed to access the users file, this was aided by the fact that our ldap database that windows authenticates against is also what kerberos uses to authenticate so usernames/passwords are the same across both services. I have set up all of the tools, albeit newer 64bit versions which seem to have given me less trouble than the previous releases of NIM/OpenAFS/Krb5, as well as setting their configurations back to what we used to use. Unfortunately this seems to be fubar'd in some way, instead all we get now is a OpenAFS token, most likely I assume from the AFScreds tool which operates some kind of integrated login process, although this does not help in getting a kerberos ticket or a afs ticket for which a login box is provided be NIM after the user logs in. Does anyone know IF it is possible to do what we are trying, and if so how? I was considering writing a pGina plugin which would interact with the server itself but this seems slightly like overkill considering that all these applications already exist...

  Read the article

• Having trouble using psservice and sc.exe between Windows Server 2008 machines

  - by Teflon Mac

  I'm trying to control services on one W2k8 machine from another; no domain just a workgroup. The user account I'm logged in as is an administrator on both machines. I've tried both psservice and sc.exe. These work in a Windows Server 2003 environment but it looks like I need to an extra step or two due to the changed security model in 2008. Any ideas as to how grant permission to the Service Control Manager (psservice) or OpenService (sc)? I tried running the DOS window with "Run As Administrator" and it made no difference. With psservice I get the following D:\mydir>psservice \\REMOTESERVER -u "adminid" -p "adminpassword" start "Display Name of Service" PsService v2.22 - Service information and configuration utility Copyright (C) 2001-2008 Mark Russinovich Sysinternals - www.sysinternals.com Unable to access Service Control Manager on \\REMOTESERVER: Access is denied. In the remote server, I get the following message in the Security Log so I know I connect and login to the remote machine. I assume it then fails on a subsequent authorization step. The logoff message in the security log is just that ("An account was logged off."), so no extra info there. Special privileges assigned to new logon. Subject: Security ID: REMOTESERVER\adminid Account Name: adminid Account Domain: REMOTESERVER Logon ID: 0xxxxxxxx Privileges: SeSecurityPrivilege SeBackupPrivilege SeRestorePrivilege SeTakeOwnershipPrivilege SeDebugPrivilege SeSystemEnvironmentPrivilege SeLoadDriverPrivilege SeImpersonatePrivilege sc.exe is similar. The command syntax and error differs as below but I also see the same login message in the remote server's security log. D:\mydir>sc \\REMOTESERVER start "Registry Name of Service" [SC] StartService: OpenService FAILED 5: Access is denied.

  Read the article

• Apachebench on node.js server returning "apr_poll: The timeout specified has expired (70007)" after ~30 requests

  - by Scott

  I just started working with node.js and doing some experimental load testing with ab is returning an error at around 30 requests or so. I've found other pages showing a lot better concurrency numbers than I am such as: http://zgadzaj.com/benchmarking-nodejs-basic-performance-tests-against-apache-php Are there some critical server configuration settings that need done to achieve those numbers? I've watched memory on top and I still see a decent amount of free memory while running ab, watched mongostat as well and not seeing anything that looks suspicious. The command I'm running, and the error is: ab -k -n 100 -c 10 postrockandbeyond.com/ This is ApacheBench, Version 2.0.41-dev <$Revision: 1.121.2.12 $> apache-2.0 Copyright (c) 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/ Copyright (c) 2006 The Apache Software Foundation, http://www.apache.org/ Benchmarking postrockandbeyond.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 32 requests completed Does anyone have any suggestions on things I should look in to that may be causing this? I'm running it on osx lion, but have also run the same command on the server with the same results. EDIT: I eventually solved this issue. I was using a TTAPI, which was connecting to turntable.fm through websockets. On the homepage, I was connecting on every request. So what was happening was that after a certain number of connections, everything would fall apart. If you're running into the same issue, check out whether you are hitting external services each request.

  Read the article

• VMRC equivalent for Hyper-V?

  - by Ian Boyd

  VMRC was the client tool used to connect to virtual machines running on Virtual Server. Upgrading to Windows Server 2008 R2 with the Hyper-V role, i need a way for people to be able to use the virtual machines. Note: not all virtual machines will have network connectivity not all virtual machines will be running Windows some people needing to connect to a virtual machine will be running Windows XP Hyper-V manager, allowing management of the hyper-v server, is less desirable (since it allows management of the hyper-v server (and doesn't work on all operating systems)) What is the Windows Server 2008 R2 equivalent of VMRC; to "vnc" to a virtual server? Update: i think Tatas was suggesting Microsoft System Center Virtual Machine Manager Self-Service Portal 2.0 (?): Which requires SQL Server IIS Installing those would unfortunately violate our Windows Server 2008 R2 license. i might be looking at the wrong product link, since commenter said there is a version that doesn't require "System Center". Update 2: The Windows Server 2008 R2 running HyperV is being licensed with the understanding that it only be used to host HyperV. From the [Windows Server 2008 R2 Licensing FAQ][4]: Q. If I have one license for Windows Server 2008 R2 Standard and want to run it in a virtual operating system environment, can I continue running it in the physical operating system environment? A. Yes, with Windows Server 2008 R2 Standard, you may run one instance in the physical operating system environment and one instance in the virtual operating system environment; however, the instance running in the physical operating system environment may be used only to run hardware virtualization software, provide hardware virtualization services, or to run software to manage and service operating system environments on the licensed server. This is why i'm weary about installing IIS or SQL Server.

  Read the article

• Mac OS X Server (10.5) mail trapped in queue

  - by Meltemi

  We've got mail accumulating in our Leopard Server's queue and not sure exactly why. This machine has required little maintenance over the years so I'm hoping someone here spot the obvious and save us some time. Let me know what other information would be helfull. Server appears to be functioning normally except for "clogged" queue and the following error associated with each "trapped" message: Looking at messages in the queue each one states something like this: Message ID: 4213C3B8B3F Date: October 27, 2009 11:33:27 AM Size: 1824 Sender: [email protected] Recipient(s) & Status: ---------------------- [email protected]: connect to 127.0.0.1[127.0.0.1]: Connection refused Under SettingsRelay we have checked Accept SMTP relays only from these hosts and networks: 127.0.0.0/8 10.0.1.0/24 The mail in queue is addressed to users whose accounts are on this server. Mail.app on the client appears to be functioning normally and checking checking mail on the server. We did add a virtual domain some time ago but all that was working fine for some time... This just started happening recently...any ideas? Edit: toggling the filter services on and off seems to have fixed this except for 2 remaining queued messages that show "mail transport unavailable" as an error!?!

  Read the article

• SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

  - by Scott Ivey

  I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

  Read the article

• XP machines on Domain not reporting WMI Data in a 2003 Server Environment

  - by Az

  I am running into a very quirky issue and I hope someone out there can help. We use a monitoring program for several networks we oversee that is WMI data dependent for a great deal of it's functionality. The Windows 2000 Professional workstations, as well as the 2003 servers in our network report WMI data fine, the Windows XP professional machines will not let me view them from within the WMI snap in for MMC (they return a Win32: Access Denied) error. I am of course logged in with an account with domain admin privileges on the domain controller when I attempt it. DCOM is enabled in component services, and the remote security option is set to allow as well. If we remove the machine from the domain and rejoin it, some workstations will show up as WMI enabled temporarily and then when I try to access them again later I get the access denied error again out of the blue. Hoping someone out there has had a similar problem or they have advice. I have had this problem with the firewall turned on or off. Thanks for your time! -Az

  Read the article

• Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

  - by DragonLord

  One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

  Read the article

• Appcrash and possible malware

  - by Chris Lively

  First off, I'm running MS Intune Endpoint Protection. It is completely up to date. On 10/25 @ 11:53PM I came across a site that caused Intune to freak out: Microsoft Antimalware has detected malware or other potentially unwanted software. For more information please see the following: http://go.microsoft.com/fwlink/?linkid=37020&name=Trojan:Win64/Sirefef.B&threatid=2147646729 Name: Trojan:Win64/Sirefef.B ID: 2147646729 Severity: Severe Category: Trojan Path: file:_C:\Windows\System32\consrv.dll Detection Origin: Local machine Detection Type: Concrete Detection Source: Real-Time Protection User: NT AUTHORITY\SYSTEM Process Name: C:\Windows\explorer.exe Signature Version: AV: 1.115.526.0, AS: 1.115.526.0, NIS: 10.7.0.0 Engine Version: AM: 1.1.7801.0, NIS: 2.0.7707.0 I, of course, elected to simply delete the file. Since then my machine has been randomly giving an error about "Host Process for Windows Services" stopped working. There are generally two different pieces of info: Description Faulting Application Path: C:\Windows\System32\svchost.exe Problem signature Problem Event Name: BEX64 Application Name: svchost.exe Application Version: 6.1.7600.16385 Application Timestamp: 4a5bc3c1 Fault Module Name: StackHash_52d4 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset: 000062bdabe00000 Exception Code: c0000005 Exception Data: 0000000000000008 OS Version: 6.1.7601.2.1.0.256.27 Locale ID: 1033 Additional Information 1: 52d4 Additional Information 2: 52d47b8b925663f9d6437d7892cdf21b Additional Information 3: ed24 Additional Information 4: ed24528f3b69e8539b5c5c2158896d3e and Description Faulting Application Path: C:\Windows\System32\svchost.exe Problem signature Problem Event Name: APPCRASH Application Name: svchost.exe Application Version: 6.1.7600.16385 Application Timestamp: 4a5bc3c1 Fault Module Name: mshtml.dll Fault Module Version: 9.0.8112.16437 Fault Module Timestamp: 4e5f1784 Exception Code: c0000005 Exception Offset: 00000000002ed3c2 OS Version: 6.1.7601.2.1.0.256.27 Locale ID: 1033 Additional Information 1: 3e9e Additional Information 2: 3e9e8b83f6a5f2a25451516023078a83 Additional Information 3: 432a Additional Information 4: 432a0284c502cce3bbb92a3bd555fe65 Intune claims the machine is clean. I've also tried some of the online scanners like trendmicro, all of which claimed the system is clean. Finally, I tried the "sfc /scannow" and it said all was good. I left my machine on after I left last night and there were about 50 of those messages. Ideas on how to proceed?

  Read the article

• User cannot access a system DSN on Windows Server 2008

  - by Ra Osolage

  We run our SQL Server services using a low privileged domain account. That account is NOT a local admin on the OS. Only access I give the user account is assigned during install of SQL: full control over its mount points and then everything else is granted by the SQL Server 2005/2008 installer. I need to create a linked server in SQL Server 2008 to an ODBC data source. So I remoted into the computer using my domain account, which is part of a group that DOES have local admin privs to the OS. I created a system DSN and configured it to connect to another SQL Server. The DSN works perfectly when I test it. However, when I try to create the linked server, I get an error. It appears to me that the DSN is invisible to the domain account that SQL Server is running as. It seems that this problem is only happening to me on Windows 2008 servers. Does anybody know whether there's anything that you need to do after creating a DSN to make it visible for other users to access?

  Read the article

• swapping or trashing with vast amounts of unmapped pagecache

  - by Marco

  I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only Firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happens: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this?

  Read the article

• swapping or trashing with vast amounts of unmapped pagecache

  - by Marco

  I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

  Read the article

• Filesystems for webserver with SATA and Solid State disk,

  - by Jorisslob

  We have just ordered a new webserver with 120 Gb solid state disk and a SATA disk. I am trying to plan ahead what sort of filesystem to use. This system will be running Linux, Apache/Tomcat to host java services. The main service is a system where people can upload reasonably large files (in the order of 100 Mb, images, image stacks and video), which people will be able to annotate and which will be sent to a database server when annotation is complete. Thus far, I plan to put most of the utility programs of the operating system om the SSD and put the large media files there. The SATA disks will hold the less volitile data like apache, tomcat and the servlets. For filesystems I have considered going for the stable EXT3 because I hear that it is best supported. The downside seems to be that it not the ideal choice for large files. That is why I am leaning towards using XFS for the SSD and EXT3 for the SATA. My questions are: 1) Does this sound like a reasonable setup? 2) What filesystems would you recommend for the SSD and for the SATA? Thanks

  Read the article

• Issues with doing a P2V on Exchange 2007

  - by PokermUNKEE

  I shutdown all Exchange services on the physical box and did a convert. Everything converted fine. Server booted up no issues and I could receive email from the outside world with no issues. But I am unable to send emails internally or externally. They just sit in the Outbox. I also disabled the DHCPClient service as I didn't want the server to get an IP address from DHCP when it first came online. It came online with no IP, then I used console to assign the correct static IP address (same one on the physical server) and rebooted. I ran the Exchange Troubleshooting Agent and it gave me the following errors: The value for the '\MSExchangeIS Mailbox\Messages Queued For Submission' counter on server exchange is greater than zero (average value is 8.8) and it appears that 'MSExchangeMailSubmission' is failing to submit messages to at least one computer with the Hub Transport server role installed over the last minute. Found 1 computers with the Hub Transport server role installed in the same Active Directory site as server exchange using local Active Directory site GUID 'ce8a4367-1bf6-4825-9cac-c4e2b115c450'. Check Local Active Directory Site Hub Transport Server Role Health (Mailflow_CheckLocalBhHealth1.1.1.1.1.1.1.1) I have one Exchange server with all the roles on it. Has anyone see this before when doing a convert? Please help :(

  Read the article

• Adding an user to samba

  - by JustMaximumPower

  I'm trying to setup some samba shares in my home network on an Ubuntu 12.04 machine. Everything works fine for my user account (max) but I can not add any new user. Every time I try to add new user they can not use the shares. It's likely that the error is very basic to the concept of samba but please don't just tell me to read the docs. I've been trying that for about 2 weeks now. I've set up the server with my user max who can mount transfer and the share max. Than I added the user simon with sudo adduser --no-create-home --disabled-login --shell /bin/false simon because the user should not be able to ssh into the machine. I did an sudo smbpasswd -a simon and set an (samba) password for simon and added an share for simon. I also added simon to transferusers to give him access to the share transfer. But simon can't connect to transfer or simons. ---- output of testparam: ------- Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[print$]" Processing section "[max]" Processing section "[simons]" Processing section "[transfer]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [max] comment = Privater share von Max path = /media/Main/max read only = No create mask = 0700 [simons] comment = Privater share von Simon path = /media/Main/simon read only = No create mask = 0700 [transfer] comment = Transferlaufwerk path = /media/Main/transfer read only = No create mask = 0755 ---- The files in /media/Main: ------ drwxrwxr-x 17 max max 4096 Oct 4 19:13 max/ drwx------ 5 simon max 4096 Aug 4 15:18 simon/ drwxrwxr-x 7 max transferusers 258048 Oct 1 22:55 transfer/

  Read the article

< Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >