Search Results

Search found 16793 results on 672 pages for 'sharepoint services'.

Page 585/672 | < Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >

• How to set up IP forwarding on Nexenta (Solaris)?

  - by Gleb

  I am trying to set up IP forwarding on my Nexenta box: root@hdd:~# uname -a SunOS hdd 5.11 NexentaOS_134f i86pc i386 i86pc Solaris The box has 2 network interfaces: root@hdd:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g1: flags=1001100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,FIXEDMTU> mtu 1500 index 2 inet 192.168.12.2 netmask ffffff00 broadcast 192.168.12.255 ether 68:5:ca:9:51:b8 myri10ge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index 3 inet 10.10.10.10 netmask ffffff00 broadcast 10.10.10.255 ether 0:60:dd:47:87:2 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 192.168.12.0 is my normal LAN with 192.168.12.1 being the firewall/gateway 10.10.10.0 is a separate LAN for iSCSI (with no internet access) I want to set up IP forwarding so that a computer on 10.10.10.0 will be able to access the internet by using 10.10.10.10 as a gateway (I don't need any port forwarding) I have turned on IP forwarding: root@hdd:~# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing disabled disabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled Routing services "route:default ripng:default" Routing daemons: STATE FMRI disabled svc:/network/routing/rdisc:default disabled svc:/network/routing/route:default disabled svc:/network/routing/legacy-routing:ipv4 disabled svc:/network/routing/legacy-routing:ipv6 disabled svc:/network/routing/ripng:default online svc:/network/routing/ndp:default But when I dry to start ipnat, I get an error: root@hdd:~# ipnat -CF -f /etc/ipf/ipnat.conf ioctl(SIOCGNATS): I/O error Here is the config: root@hdd:~# cat /etc/ipf/ipnat.conf #!/sbin/ipnat -f - # map e1000g1 10.10.10.10/24 -> 192.168.12.2/32 So the question is how to fix this.. Thanks in advance!

  Read the article

• Is one server on a vlan unnecessary?

  - by moomoochoo

  DETAILS I've been researching web hosting solutions in Japan. Based on this question one of the services available seems to be a VLAN. I've read about the advantages of such a system for a large organization, but there doesn't seem to be much information regarding smaller setups. I take that to mean that for one server it is likely to be unnecessary? My concern is that I don't know how many other servers are on the WAN, so regardless of how many servers I use a VLAN might still be a good idea. SERVER INFO One dedicated server would be used. It would not be virtualized. My Research so far Based on comments here, a VLAN would be useful for mitigating these problems. A user on another server could, either mistakenly or maliciously, assign one of your IP addresses to their server, resulting in a "duplicate IP" situation that would cause connectivity issues. A user on another server could poison the arp cache and potentially redirect traffic to snoop on communication intended to/from your server. (later in the discussion this point was said to be unrealistic.) QUESTION Is it worthwhile getting a vlan for one dedicated server? Will it be easier/the same/ harder to manage?

  Read the article

• How to direct reverse proxy requests using wildcard vhosts

  - by HonoredMule

  I'm interested in running a reverse proxy with 2-3 virtual machines behind it. Each internal server will run multiple virtual hosts, and rather than manually configuring each individual vhost on the proxy (a variety of vhosts come and go too often for this to be practical), I would like to use something which can employ pattern matching in a sequential order to find the appropriate back-end server. For example: Server 1: *.dev.mysite.com Server 2: *.stage.mysite.com Server 3: *.mysite.com, dev.mysite.com, stage.mysite.com, mysite.com Server 4: * In the above configuration, task.dev.mysite.com would go to Server 1, dev.mysite.com would go to Server 3, yoursite.stage.mysite.com to Server 2, www.mysite.com to Server 3, and yoursite.com to Server 4. I've looked into using Squid, Varnish, and nginx so far. I have my opinions regarding their respective desirability and general suitability, but it's not readily apparent if any of them can handle dynamic server selection in this manner and not require per-vhost configuration. Apache on the other hand can do this handily and simply, but otherwise (aside from being well-known and familiar) seems very poorly suited to the partly-performance-serving task. Performance isn't actually a major concern yet, but it seems foolish to use Apache if another system will perform far better and can also handle the desired 'hands-free' configuration. But so is frequently having to adjust the gateway for all production services and risk network-wide outage...and so also is setting oneself up for longer downtime later if Apache becomes a too-small bottleneck. Which of these (or other) reverse proxies can do it/would do it best? And maybe I should post this as a separate question, but if Apache is the only practical option, how safe/reliable/predictable is apache-mpm-event in apache2.2 (Ubuntu 12.04.1) particularly for a dedicated reverse proxy? As I understand it the Event MPM was declared "safe" as of 2.4 but it's unclear whether reaching stability in 2.4 has any implications for the older (2.2) versions available in official/stable package channels of various distros.

  Read the article

• I used disk copy to clone my drive, now my windows 7 profile won't load correctly

  - by RzK

  I used easeuse disk copy, after acronis, clonezilla, windows image restore failed me. Basically it copys all sectors, I set it to skip bad sectors(40). The source drive works, it just gave me a couple errors and stopped booting at one point. The drive is an identical copy, minus 40 bad errors. The drive is set to C and active partition, I rebuilt the boot order. I've ran sfc /scannow and ran chkdsk /r chkdsk found 20kb of bad sectors if I remember right. Now the issue I get is when I log into my profile which was saved right, I get a blank light blue wallpaper (non-license) explorer.exe is not running, and there are only 4 processes running in taskmanager, including taskmanager. I would try a repair install but CRTL-E would not open, nothing will open once I force start explorer.exe, almost like all services are down. What should I do? Fresh install is almost not a possibility I will try and fix this issue. sfc /scannow /offbootdir=c:\ /offwindir=c:\windows returns "Windows Resource Protection could not perform the requested operation"

  Read the article

• Authenticating Active Directory Users to Mac OS X Mavericks Server L2TP VPN Service

  - by dean

  We have a Windows Server 2012 Active Directory Infrastructure that consists of two domain controllers. Bound to the Active Directory Domain is a Mac OS X Mavericks Server 10.9.3. The server runs Profile Manager and VPN Services. My Active Directory users are able to authenticate to the Profile Manager, but not the VPN. I have found several threads on other forums of other users reporting similar issues, here is just one of many references: https://discussions.apple.com/thread/5174619 It appears as though the issue is related to a CHAP authentication failure. Can anyone suggest what next troubleshooting steps I might take? Is there a way to liberalize the authentication mechanism to include MSCHAP? Here is an excerpt of the transaction from the logs. Please note the domain has been changed to example.com. Jun 6 15:25:03 profile-manager.example.com vpnd[10317]: Incoming call... Address given to client = 192.168.55.217 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: publish_entry SCDSet() failed: Success! Jun 6 15:25:03 --- last message repeated 2 times --- Jun 6 15:25:03 profile-manager.example.com pppd[10677]: pppd 2.4.2 (Apple version 727.90.1) started by root, uid 0 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: L2TP incoming call in progress from '108.46.112.181'... Jun 6 15:25:03 profile-manager.example.com racoon[257]: pfkey DELETE received: ESP 192.168.55.12[4500]->108.46.112.181[4500] spi=25137226(0x17f904a) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP connection established. Jun 6 15:25:04 profile-manager kernel[0]: ppp0: is now delegating en0 (type 0x6, family 2, sub-family 0) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connect: ppp0 <--> socket[34:18] Jun 6 15:25:04 profile-manager.example.com pppd[10677]: CHAP peer authentication failed for alex Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connection terminated. Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnecting... Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnected Jun 6 15:25:04 profile-manager.example.com vpnd[10317]: --> Client with address = 192.168.55.217 has hung up

  Read the article

• Active Directory FRS problems. 13508 error and other problems

  - by ITPIP

  I have 3 Domain Controllers. We will call them DC1, DC2 and DC3. DC3 and DC2 show Event ID 13508 in their FRS logs with no follow-up event(13509 I think) to say the error had been fixed. DC1's FRS log no matter what you do never shows any events besides FRS service stopped and started. DC1 holds the SYSVOL that needs to be replicated to the other DC's. The other DC's sysvol folders are empty. I have tried the burflag method of fixing this but I haven't had any luck. My procedure for that was to stop all FRS services on all DC's. Then set the burflag on DC1 to D4 and the other two DCs burflag to D2. Started FRS on DC1 and the only event's I see in DC1's FRS event logs are service stopped and service started messages. This fact is leading me to believe that something is wrong on FRS for DC1. I believe there should be events 13553 and 13516 in the FRS event logs after an authoritative sysvol restore. The other two DC's do not have anything in their SYSVOL, otherwise I would have made one of them the authoritative sysvol. DC1 is MS Server 2003 Enterprise Edition SP2 DC2 is MS Server 2003 Standard Edition SP1 DC3 is MS Server 2003 R2 Standard Edition SP2 I did not setup this domain originally but I am now the administrator of it, so I don't have a lot of background on why certain things may have been done in the past. My main goal is to try and fix these issues to get myself better prepared to decommision DC1 and add a DC running Server 2008 to my domain. Thanks.

  Read the article

• Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

  - by Steve

  I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

  Read the article

• Please insert a disk into SD/MMC - Vista problem [closed]

  - by Naunidh

  Possible Duplicate: Please insert a disk into SD/MMC - Vista problem Hi I tried pushing my 2GB micro SD card using the inbuilt card reader. On clicking the drive I get "Please insert a disk into SD/MMC". This problem is really frustrating. The card works fine on other computers so does the microSD to SD attachment. I have done following o fix. - Updated Vista and installed SP1. - Updated the TI drivers for FlashDrive. - Checked Vaio site for updates (none required). - Added a new entry HKLM\SYSTEM\ControlS* et001\Services\tifm21\Parameters/SDParam=1 took the hint from (http://tinyurl.com/nk33tp) I have restarted the PC multiple times. As soon as I put the card in, the SD/MMC device icon blips, so it seems the hardware is at least detecting something. The card reader was working fine few days back. I guess some windows update has broken something, does any one have any idea on how to proceed. MY laptop is VGN-N365E.

  Read the article

• ZFS: Mirror vs. RAID-Z

  - by John Clayton

  I'm planning on building a file server using OpenSolaris and ZFS that will provide two primary services - be an iSCSI target for XenServer virtual machines & be a general home file server. The hardware I'm looking at includes 2x 4-port SATA controllers, 2x small boot drives (one on each controller), and 4x big drives for storage. This allows one free port per controller for upgrading the array down the road. Where I'm a little confused is how to setup the storage drives. For performance, mirroring appears to be king. I'm having a hard time seeing what the benefit would be of using RAIDZ over mirroring would be. With this setup I can see two options - two mirrored pools in one stripe, or RAIDZ2. Both should protect against 2 drive failures, and/or one controller failure...the only benefit of RAIDZ2 would be that any 2 drives could fail. The storage should be 50% of capacity in both cases, but the first should have much better performance, right? The other thing I'm trying to wrap my mind around is the benefit of mirrored arrays with more than two devices. For data integrity what, if any, would be the benefit of a RAIDZ over a three-way mirror? Since ZFS maintains file integrity what does RAIDZ bring to the table...doesn't ZFS's integrity checks negate the value of RAIDZ's parity?

  Read the article

• How to balance the root domain using NS records?

  - by Patrick McCurley

  I have two load balancers that balance incoming traffic across multiple data centers. These work fine. I can test them out by doing an 'nslookup mydomain.com xIP' I have now taken out DNS services with DYN.com to allow me to manage the DNS Zone file so that typing mydomain.com will ask my load balancers what the IP address is to resolve. Step 1 : the NS record for www. I set up A records (glue) for ns1 & ns2, then the corresponding NS record to delegate the DNS lookup to the balancers instead of DYN.com's nameservers. ns1.mydomain.com A [ip address of load balancer 1] ns2.mydomain.com A [ip address of load balancer 1] www.mydomain.com NS ns1.mydomain.com www.mydomain.com NS ns2.mydomain.com All is well - when I type www.mydomain.com, the requests get delegated to my load balancers who provide the IP address of the endpoint and the connect is made successfully. Step 2 : the NS record for root. This is where I run into problems. I need customers to be able to type 'mydomain.com' (without the www) and ALSO get delegated to the load balancers for the IP address. However - of the research I have done, and through the DYN control panel, it seems to be not allowed to provide an NS record for the root - as this overrides the default NS servers. How can i delegate both the root, and the www. to my load balancers?

  Read the article

• For Australian audiences, would an uncached .com.au domain resolve faster than an uncached .com?

  - by thomasrutter

  Is there any speed benefit to using a .com.au domain rather than a .com if your customers, hosting and DNS services are in Australia, specifically in the worst typical case (domain is not cached in any local DNS relay for customer)? Assuming that both domains pointed to the same nameservers in the end. I know this is mostly academic because we are talking about a DNS lookup that would take at most a few hundred milliseconds and would only be relevant once at the beginning of a session. I just was curious. I know that an uncached .com lookup will involve consulting at least one ?.gtld-servers.net. server and an uncached .com.au will involve consulting at least one ?.au. server. Now, what I guess I'd need to know is Are the various ?.gtld-servers.net. servers using anycast technology that would have local fully authoritative nodes in Australia, making them just as fast to Australians as ?.au. and avoiding a 200ms+ overseas latency, or are some or all of them hosted only in the US or in the northern hemisphere?

  Read the article

• Windows 2003 Active Directory Integrated DNS zone not registering non-domain computers

  - by Jeff Willener

  I'm not a networking guy by all means, I'm just a developer who dabbles enough to get into trouble and I'm there. So bear with me... :) At my office I have a Windows 2003 Domain Controller which also services DNS. On the domain I have a handful of computers and other misc. equipment/toys. For the DNS I only created a Forward Lookup Zone for my domain (mydomain.com). I run a lot of VM's so generally I have everything on the domain, however some of those VM's are not and only in a 'Workgroup'. I also have another laptop which belongs to another domain (otherdomain.com) which is here 100% but I use it for other purposes and has to belong to the otherdomain.com. With all that said, I have two questions: I have found any computer not on mydomain.com does not register it's IP address even though 'Register this connections address in DNS' is set to in the 'Advanced TCP/IP Settings' for the nic. Where have I messed this up? On the laptop which is registered on otherdomain.com, when I do a nslookup for a computer on mydomain.com (e.g. nslookup devbox1) it appends otherdomain.com as the suffix (e.g. queries devbox1.otherdomain.com). Same thing occurs if I use the fully qualified name. In the 'Advanced TCP/IP Settings' for that nic, I can 'Append these DNS suffixes' of mydomain.com but I fear that will hose my DNS lookups when I VPN to otherdomain.com. So what is the correct approach to resolve this issue? Do I add both mydomain.com and otherdomain.com in that order?

  Read the article

• HP c6180 driver refuses to install - "must reboot to continue delete files and continue install" loo

  - by Aszurom

  User called me last night, can't get HP drivers to install for printer. 500 meg download for latest c6180 driver. PC says "computer must be restarted to delete some files, then setup will continue." and it won't pass that point. (that's not exact phrasing of the error, and I'm not on the system now) Target machine is XP SP2. I upgraded to SP3. Fully patched. Ran malwarebytes, spybot, hijack this and turned off all startup entries. I noted that windows update also failed on optional printer driver updates for other printers installed on the machine. Went to printer server properties, removed all print drivers from system, deleted all printer ports. Made sure no services were marked disabled. After 5 hours of fighting this I started to get desperate, and uninstalled anything that referenced HP in the machine at all. Still no cure. I'm 6 hours into this and completely stumped. Google returns nothing applicable except unanswered requests for help on same topic.

  Read the article

• Biztalk 2009 logshipping with SQL 2008

  - by Manjot

  Hi, I am setting up biztalk logshipping for Biztalk 2009 database. Following http://msdn.microsoft.com/en-us/library/aa560961.aspx article, I am doing the following to setup biztalk logshipping on destination server: Enable Ad-hoc queries by: sp_configure 'show advanced options',1 go reconfigure go sp_configure 'Ad Hoc Distributed Queries',1 go reconfigure go sp_configure 'show advanced options',0 go reconfigure go Execute LogShipping_Destination_Schema & LogShipping_Destination_Logic in master on destinations server Run: exec bts_ConfigureBizTalkLogShipping @nvcDescription = '', @nvcMgmtDatabaseName = '', @nvcMgmtServerName = '', @SourceServerName = null, -- null indicates that this destination server restores all databases @fLinkServers = 1 -- 1 automatically links the server to the management database When I run this I am receiving the following error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. After some research I found some info : Usually this error means that the SQL Server Service Principal Name (SPN) was not configured, and NTLM was not being used as an authentication mechanism. SQl services are runing under different domain accounts. So, I asked the domain admin to create SPNs for the servers, SQL service accounts for beoth source and destination using name and FQDN. enabled computer name and service accounts for delegation. When I run the following: select * from sys.dm_exec_connections I get the the same error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON' Any help please?

  Read the article

• Create App_Data and register Excel application on ASP.NET deployment? (IIS7.5)

  - by Francesco

  I am deploying an ASP.NET MVC3 application in IIS7. I already deployed other applications but they never made use of the App_Data folder or any additional component such as the Interop library. I used the one click deployement and I sue the default application pool. When I launch the application I immediately get an error stating: [web access] Sorry, an error occurred while processing your request. [browse from IIS7] Could not find a part of the path 'D:\Data\Apps\OppUpdate\App_Data\Test.xlsx'. Then I manually added the App_Data folder inside the deployment directory and the application starts regularly. Then when it comes to the taks that uses the Interop library, I get the following error: [web access] Sorry, an error occurred while processing your request. [browse from IIS7] Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). Is there any way to automatically add the App_Data folder when using 1 click deploy? How can I register the Interop services? Thanks you, Francesco

  Read the article

• Joining Samba to Active Directory with local user authentication

  - by Ansel Pol

  I apologise that this is somewhat incoherent, but hopefully someone will be able to make enough sense of this to understand what I'm trying to achieve and provide pointers. I have a machine with two network interfaces connected to two different networks (one of which it's providing several other services for, such as DNS), running two separate instances of Samba, one bound to each interface. One of the instances is just a workgroup-style setup using share-level authentication, which is all working fine. The problem is that I'm looking to join the other instance to an MS Active Directory domain (provided by MS Windows Small Business Server 2003) to enable a subset of the domain users to access the shares from Windows machines on the other network. The users who need access from the domain environment have accounts (whose names are all-lowercase versions of their domain usernames) on the machine running Samba, but I'm not sure about how to map the UIDs and everything I've read concerns authenticating accounts on that machine against either AD or another LDAP server. To clarify: I only want the credentials for AD users accessing the non-workgroup Samba instance to be authenticated against AD, not the accounts on the machine running Samba. I hope this is sufficiently clear. EDIT: In addition to being able to access the Samba shares from AD, I do also need to be able to access a share on the domain from the machine running Samba but would still like everything non-Samba-related to authenticate locally.

  Read the article

• Clustering/load balancing for cluster unaware applications

  - by AaronLS

  Forgive me if I use any of these terms incorrectly. I am wondering if there is any kind of software that would allow my two "join" two computers together such that a cluster unaware application could utilize their combined computing resources? By "cluster unaware" I mean an application that isn't designed to share work across multiple services. My understanding is that clustering is enabled by the specific application by it's architecture, such that messaging with multiple instances of the application coordinate the sharing of work. Instead I am looking for something that enables clustering at the OS or virtualization level, so that any application could essentially be clustered. Failing that, I am also wondering about the following scenario: We have 3 different applications we will call A, B, and C. We have 2 single core computers. At any given time lets say that any combination of those applications will be CPU intensive. In cases where only 2 of those apps are very active, have one of them moved over to a different server. In a nutshell, some sort of dynamic automatic shuffling of the application's load. I have heard of virtual machines that can be migrated across physical machines while live, but I am wondering if this can be done automatically in response to an application's or VM's CPU activity?

  Read the article

• Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

  - by jesse-mcdowell

  We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

  Read the article

• SeLinux blocking connection to sshd on Ubuntu 9.10

  - by Barton Chittenden

  When I try to log on to my laptop, which runs Ubuntu 9.10, the server rejects my login attempts. Checking /var/log/auth.log, I see the following: Feb 14 12:41:16 tiger-laptop sshd[6798]: error: ssh_selinux_getctxbyname: Failed to get default SELinux security context for tiger I googled for this, and ran across the following: http://www.spinics.net/lists/fedora-.../msg13049.html Here's the part that I think relates to the problem that I'm having: Quote: What's wrong on my system? Why it's not possible to login even if selinux is in permissive mode? Any suggestions? I'd start by trying to figure out why sshd isn't running in sshd_t (it seems to be running in sysadm_t). Paul. selinux mailing list selinux@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mail...stinfo/selinux Yes, sshd is running in sysadm_t: ps axZ | grep sshd system_u:system_r:sysadm_t 3632 ? Ss 0:00 /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pi ls -Z /usr/sbin/sshd system_ubject_r:sshd_exec_t /usr/sbin/sshd Don't know why it's not sshd_t. I didn't modified something. It's a standard installation of sles11 with the default reference policy from tresys. Maybe this code snippet from policy/modules/services/ssh.te is responsible for that: Allow ssh logins as sysadm_r:sysadm_t gen_tunable(ssh_sysadm_login, true) Any ideas? Do you have boolean init_upstart set to on? if not try setting it to on. I do not believe ssh_sysadm_login boolean works currently but i may be mistaken. -- Yeah, setting init_upstart to on did the trick! THANK A LOT! Do you know why this prevents the user from logging in through ssh even if selinux is set to permissive?? Ok, so the million dollar question is "where do I set 'init_upstart=1'"? It's not clear from context which configuration file needs to be edited, and I'm not at all familiar with SELinux configuration.

  Read the article

• Windows Media Sharing not 'always' being detected by PS3

  - by Ahmad

  I'm having a weird problem with Windows Media Sharing on Windows 7 .. I have the following hardware in my network: PC 1 --- My main PC --- runs Windows 7 Ultimate x64 PC 2 --- My backup PC --- runs Windows 7 Ultimate x32 PS3 PC 1 is my main PC which has all my data/media on it .. PC 2 is a backup PC I have, but I use it like once in 2 months .. It has nothing installed on it apart from some very very basic software ... Problem is, my PS3 always sees the media sharing service coming from PC 2, but it never sees the media sharing service coming from PC 1 initially .. Both PC 1 and PC 2 have the same media sharing configuration (All everything on all devices on all networks) ... But when I restart both PCs, the PS3 will only detect PC 2's media sharing service, not PC1 .... However here's the twist .. When PC 1 is restarted, and if I view my 'Network' on PC 2, I do see PC 1's Media Sharing Service, and I'm able to play from it too on PC 2 .. To get my PS3 to also see PC 1's media sharing service, I have to do either of the following 2 things: 1) Play something from PC 1's media sharing service on PC 2 ... The PS3 will then magically also detect PC 1's media sharing service .. 2) Go into the Services area on PC 1 and restart the 'Windows Media Player Network Sharing Service' ... After this, the PS3 also instantly starts to see PC 1's media sharing service .. Since my PS3 is like a month old and is properly detecting PC 1's media sharing service, I think the problem is somewhere in the configuration of PC 1's media sharing service ... Also, on PC 1 I have Norton Internet Security 2012 installed, but I've disabled it completely, and have also disabled Windows Firewall (from PC 1 only) .. Can someone shed some light onto this ?

  Read the article

• Terminal server performance over high latency links

  - by holz

  Our datacenter and head office is currently in Brisbane, Australia, and we have a branch office in the UK. We have a private WAN with a 768k link to our UK office and the latency is at about 350ms. The terminal server performance is reeeeealy bad. Applications that don't have too much animation or any images seem to be okay. But as soon as they do, the session is almost unusable. Powerpoint and internet explorer are good examples of apps that make it run slow. And if there is an image in your email signature, outlook will hang for about 10 seconds each time a new line is inserted, while the image gets moved down a few pixels. We are currently running server 2003. I have tried Server 2008 R2 RDS, and also a third party solution called Blaze by a company called Ericom, but it is still not too much better. We currently have a 5 levels dynamic class of service with the priority in the following order. VoIP Video Terminal Services Printing Everything else When testing the terminal server performance, the link monitored using net-flows, and have plenty we of bandwidth available, so I believe that it is a latency issue rather than bandwidth. Is there anything that can be done to improve performance. Would citrix help at all?

  Read the article

• Odd IIS FTP Failure

  - by Monkey Boson

  We're running a script on our production box that zips up our database and FTPs it to a backup box every night. Our production box is running Redhat Enterprise 5. Our backup box is running Windows XP Pro / IIS 5.1. Both machines are on the same VLAN (not sure if this is imporatant). The backup file usually clocks in at around 3GB. Every now and again (~5% of the time), the backup script fails. The shell script on the "client side" - which looks at return codes - never identifies any problem since ftp always returns 0. On the "server side", IIS writes out a log that looks like this: #Software: Microsoft Internet Information Services 5.1 #Version: 1.0 #Date: 2009-08-08 07:04:25 #Fields: time c-ip cs-method cs-uri-stem sc-status sc-win32-status 07:04:25 192.168.111.235 [15]USER backup 331 0 07:04:25 192.168.111.235 [15]PASS - 230 0 07:05:54 192.168.111.235 [15]created backup_20090808.zip 426 10035 07:06:16 192.168.111.235 [15]QUIT - 426 0 Now, I know that 426 means "Connection closed, transfer aborted", which is sort-of a catch-all for "IIS was not happy". The real puzzler is the wincode: 10035 (WSAEWOULDBLOCK -- Resource temporarily unavailable). My understanding is that this code is normal when using non-blocking socket calls - which would almost certainly be used by any FTP Server implementation. My first guess that it might be a timeout issue doesn't make sense, since we're only talking about a few minutes here and the timeout was left at the default 900 s. Does anybody have any ideas about what is causing this problem, and how it may be fixed? Thanks!

  Read the article

• Calendar sharing between unrelated Domains

  - by vlannoob

  I have a 'request' from one of the 'big guys' that has me scratching my head a bit. He is one of our Executives that also is a board member of several other organistations, so he floats around between 4 different unrelated companies, each with their own domains, Exchange setup etc. He has domain accounts in each organisation. He has an iPad with multiple Exchange accounts so he can see all his calendars which works Ok for him - Apple calendaring bugs/flaws aside. What he wants is the ability for 'reception staff' at each organisation to 'see' all his calendars as they are booking things for him in their respective organisations calendars without it conflicting with bookings made in his calendars by other organisations......you with me?? So for example: Company A books a meeting into his Comapny A calendar at 9am Monday and Company B books him a meeting in his Company B Calendar at 9:15am Monday on the other side of town and of course Company C has him booked in all day Monday on their Company C calendar. He gets all those on his iPad but he would like either a 'global' calendar all can see and book into or the ability for receptionists at Company's A,B and C to see all the Calendars to avoid these kind of conflicts. I told him to 'go away' straight off the bat, I don't control anything to do with the other companies or know their infrastructure. And quite frankly I don't want any part of it...but he's whining and he's high enough up the food chain that I can't ignore him forever. I'm open to suggestions. Is there any third party software/services that can facilitiate this kind of setup? I really don't want to be creating users in my AD structure to people not ion our organisation so they can get access to his calendar and I am sure there sysadmins feel the same. As usual - any advice is greatly appreciated ;)

  Read the article

• How to connect to local instance of SQL Server 2008 Express

  - by Billy Logan

  I just installed SQL Server 2008 Express on my windows 7 machine. I previously had 2005 on here and used it just fine with the old SQL Server Management Studio Express. I was able to connect with no problems to my PC-NAME\SQLEXPRESS instance. I uninstalled 2005 and SQL Server Management Studio Express. I then installed SQL Server 2008 Express on my machine and elected to have it install SQL Server Management Studio. Now, when I try to connect to PC-NAME\SQLEXPRESS (with Windows Authentication, like I always did), I get the following message: Cannot connect to PC-NAME\SQLEXPRESS. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 When I went to the help link it mentions, the help page suggests the following: * Make sure that the SQL Server Browser service is started on the server. * Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections. I did try starting the SQL Server Browser, but don't see that the Surface Area Configuration is installed with this express version. I had seen another user with an almost exact same issue that was missing the database engine on install. If that were the case how could i test for that and where would i go to download that install. Thanks in advance, Billy

  Read the article

• UPS with a HP Proliant server

  - by Groo

  We placed a EATON Ellipse Max 1500 (900W) as the UPS for our HP Proliant ML350 G6. Upon first power failure (actually we only moved the UPS' input plug to a different socket), server immediatelly turned off, and the Health LED turned red and started blinking. UPS was in operation for about a week before that, with battery fully charged to 100%. Since our server's hot-plug supply is 460W, we are pretty sure we haven't overloaded it, the server was completely idle at that time (no web or win apps running except Windows Server core services). Then we tried to do the same with a different, no-name older PC (Core 2 Duo, 2Gb RAM) with a generic power supply (not sure what the power is) and it continued working when we pulled the plug out. UPS load was less than 15% (measured in the provided Eaton utility). We measured the UPS' output voltage using a smart oscilloscope and the THD of the UPS output waveform turned out to be 40%. Did you have similar experiences? Could this be a faulty UPS? Or a faulty power supply? Or some HP sensors configured to trigger too strictly? I wouldn't like replacing this UPS with the same brand, to get same results. [Edit] I also tried to do this while the server is turned off. While the UPS is working on battery, server will not start - as soon as I press the power button, Health LED starts blinking red.

  Read the article

< Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >