Search Results

Search found 15698 results on 628 pages for 'keep alive'.

Page 592/628 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

• Can't communicate between lan ports on openwrt router

  - by ScaryAardvark

  I've got a WBMR-HP-G300H Buffalo Airstation router on which I've installed the lates OpenWRT software. All is working well (ADSL, WIFI etc) except for one niggle. I can't communicate between lan ports. i.e. if I have one computer connected on lan port 1 and I try to ping another computer on lan port 2 then I get "destination unreachable". I can ping both computers from the router itself and can also ping each computer from a seperate laptop connected wirelessly. All computers are in the same subnet range (10.0.0.?/24). I suspect that I may need to configure a vlan on the switch but everytime I try and do this with various google'ed configuration I keep freezing out all lan-ports and I have to revert back using a wirelessly connected laptop. Here's my /etc/config/network: config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option type 'bridge' option proto 'static' option netmask '255.255.255.0' option ipaddr '10.0.0.1' option _orig_ifname 'eth0 wlan0' option _orig_bridge 'true' option ifname 'eth0' config adsl-device 'adsl' option fwannex 'a' option annex 'a2p' config interface 'wan' option _orig_ifname 'nas0' option _orig_bridge 'false' option proto 'pppoa' option encaps 'vc' option atmdev '0' option vci '38' option vpi '0' option username '?????????????' option password '??????????????' Any help would be warmly received. Here's some more config stuff. root@OpenWrt:~# ifconfig -a br-lan Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:226576 errors:0 dropped:346 overruns:0 frame:0 TX packets:269292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:26771676 (25.5 MiB) TX bytes:183986450 (175.4 MiB) eth0 Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifb0 Link encap:Ethernet HWaddr 36:60:EC:DF:13:A1 BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifb1 Link encap:Ethernet HWaddr 4A:7B:75:67:54:E0 BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:780 errors:0 dropped:0 overruns:0 frame:0 TX packets:780 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:58369 (57.0 KiB) TX bytes:58369 (57.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 00-24-A5-BD-66-08-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2424 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:320188 (312.6 KiB) TX bytes:0 (0.0 B) pppoa-wan Link encap:Point-to-Point Protocol inet addr:81.136.179.204 P-t-P:81.134.80.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:258894 errors:0 dropped:0 overruns:0 frame:0 TX packets:212976 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:177341656 (169.1 MiB) TX bytes:25192459 (24.0 MiB) wlan0 Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:204063 errors:0 dropped:0 overruns:0 frame:0 TX packets:245516 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:26613140 (25.3 MiB) TX bytes:162799765 (155.2 MiB) root@OpenWrt:~# brctl show bridge name bridge id STP enabled interfaces br-lan 8000.0024a5bd6608 no wlan0 eth0 root@OpenWrt:~# swconfig dev eth0 show Global attributes: enable_vlan: 0 Port 0: pvid: 0 link: port:0 link:up speed:1000baseT full-duplex txflow rxflow Port 1: pvid: 0 link: port:1 link:down Port 2: pvid: 0 link: port:2 link:down Port 3: pvid: 0 link: port:3 link:down Port 4: pvid: 0 link: port:4 link:up speed:100baseT full-duplex txflow rxflow auto Port 5: pvid: 0 link: port:5 link:up speed:100baseT full-duplex txflow rxflow auto Regards Mark.

  Read the article

• VMware vSphere cluster design for site redundancy

  - by Stefan Radovanovici

  I have a question about the best design for site redudancy when using vSphere clusters. A bit of background info about our situation first though. We are a medium-sized company with two main offices, located in different countries. Our networks are linked by a Layer2 150Mbps leased line which is currently underused. We have a variety of services running for internal use within the company, some on physycal servers and some on existing vSphere clusters. In our department we also run several services (almost all running under various forms of Linux) like NTP, Syslog, jump servers, monitoring servers and so on. We have now the requirement that those servers need to be redundant within each location (which they are not at the moment) and also site redudant (which they are to some extent, the servers are duplicated in the 2nd location with configurations kept in sync via various methods at the application layer). There is no SAN available for us, at least not something that we can use at the moment. Cost is also an issue. While we do have some budget available for this, we can't afford to buy SANs for both locations for example. I looked at the VSA feature and it seems that this could be something for us but I am unsure how to solve the site-redudancy requirement. At the moment for testing purposes I am setting up in a lab a vSphere 5 with VSA on two ESXi hosts. I am currently using the Essentials Plus kit with VSA license, which allows me to build a VSA cluster on up to 3 hosts, together with a vCenter license to manage them. The hosts each have two dual-port network cards and two 600GB drives, running in Raid1. Hardware-wise this will be enough for us to run the all the services we need as VMs and will provide redundandcy within the site. At the moment I see only two option to have site redundancy: build an identical VSA cluter in the second location and keep the various services sync'ed at application layer (database sync, rsync and so on). simply move one of the hosts from the existing cluster to the second location, basically having the VSA cluster span the 150Mbps link between the sites. I would very much prefer the second option but I am unsure how well it'll work, if it can work at all. Technically it should, we can span the needed VLANs across the leased line and have them available in the second location. The advantage would be that we don't need to worry at all about sync'ing databases and the like. But I have the feeling that the bandwidth will not be enough, I have no way of knowing how much traffic will the VSA cluster generate between the hosts. I realize that this will most likely depend on the individual usage of the VMs but still, I have no idea how VSA replicates data between the ESXi hosts. Are these my only options or can my goals be achieved in some other way ? Is there perhaps a way to have some sort of "cold stand by" cluster in the second location where the VMs would be sync'ed once per night from the main location ? The idea is that in case the first site becomes unavailable, we would be able to bring all those VMs online there. We would be ok with the data being 1 day old. Any answers are appreciated. Best regards, Stefan

  Read the article

• Windows 7 inbuilt and 3rd party (de)fragmentation related queries

  - by Karan

  I have a pretty good idea of how files end up getting fragmented. That said, I just copied ~3,200 files of varying sizes (from a few KB to ~20GB) from an external USB HDD to an internal, freshly formatted (under Windows 7 x64), NTFS, 2TB, 5400RPM, WD, SATA, non-system (i.e. secondary) drive, filling it up 57%. Since it should have been very much possible for each file to have been stored in one contiguous block, I expected the drive to be fragmented not more than 1-2% at most after this rather lengthy exercise (unfortunately this older machine doesn't support USB 3.0). Windows 7's inbuilt defrag utility told me after a quick analysis that the drive was fragmented only 1% or so, which dovetailed neatly with my expectations. However, just out of curiosity I downloaded and ran the latest portable x64 version of Piriform's Defraggler, and was shocked to see the drive being reported as being ~85% fragmented! The portable version of Auslogics Disk Defrag also agreed with Defraggler, and both clearly expected to grind away for ~10 hours to completely defragment the drive. 1) How in blazes could the inbuilt and 3rd party defrag utils disagree so badly? I mean, 10-20% variance is probably understandable, but 1% and 85% are miles apart! This Engineering Windows 7 blog post states: In Windows XP, any file that is split into more than one piece is considered fragmented. Not so in Windows Vista if the fragments are large enough – the defragmentation algorithm was changed (from Windows XP) to ignore pieces of a file that are larger than 64MB. As a result, defrag in XP and defrag in Vista will report different amounts of fragmentation on a volume. ... [Please read the entire post so the quote is not taken out of context.] Could it simply be that the 3rd party defrag utils ignore this post-XP change and continue to use analysis algos similar to those XP used? 2) Assuming that the 3rd party utils aren't lying about the real extent of fragmentation (which Windows is downplaying post-XP), how could the files have even got fragmented so badly given they were just copied over afresh to an empty drive? 3) If vastly differing analysis algos explain the yawning gap, which do I believe? I'm no defrag fanatic for sure, but 85% is enough to make me seriously consider spending 10 hours defragging this drive. On the other hand, 1% reported by Windows' own defragger clearly implies that there is no cause for concern and defragging would actually have negative consequences (as per the post). Is Windows' assumption valid and should I just let it be, or will there be any noticeable performance gains after running one of the 3rd party utils for 10 hours straight? 4) I see that out of the box Windows 7 defrag is scheduled to run weekly. Does anyone know whether it defrags every single time, or only if its analysis reveals a fragmentation percentage over a set threshold? If the latter, what is this threshold and can it be changed, maybe via a Registry edit? Thanks for reading through (my first query on this wonderful site!) and for any helpful replies. Also, if you're answering question #3, please keep in mind that any speed increases post defragging with 3rd party utils vis-à-vis Windows' inbuilt program should not include pre-Vista (preferably pre-Win7) examples. Further, examples of programs that made your system boot faster won't help in this case, since this is a non-system drive (although one that'll still be used daily).

  Read the article

• NPM not installing dependencies?

  - by neezer

  Having trouble getting NPM to install dependencies with npm install -d in my project directory with a defined package.json file. Here's my package.json: https://gist.github.com/3068312 And after wiping my project root's node modules folder (rm -rf node_modules), I run npm install -d in my project root and am greeted with this: (ssh) /vagrant git:master ? npm install -d npm info it worked if it ends with ok npm info using [email protected] npm info using [email protected] npm info preinstall [email protected] npm http GET https://registry.npmjs.org/sinon npm http GET https://registry.npmjs.org/underscore npm http GET https://registry.npmjs.org/mocha npm http GET https://registry.npmjs.org/request npm http 304 https://registry.npmjs.org/sinon npm http 304 https://registry.npmjs.org/underscore npm http 304 https://registry.npmjs.org/mocha npm http 304 https://registry.npmjs.org/request npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info unbuild /vagrant/node_modules/underscore npm info unbuild /vagrant/node_modules/mocha npm info unbuild /vagrant/node_modules/sinon npm info unbuild /vagrant/node_modules/request npm ERR! error installing [email protected] npm info unbuild /vagrant/node_modules/underscore npm ERR! error rolling back [email protected] Error: UNKNOWN, unknown error '/vagrant/node_modules/underscore' npm ERR! Error: ENOENT, no such file or directory '/vagrant/node_modules/underscore/package.json' npm ERR! You may report this log at: npm ERR! <http://bugs.debian.org/npm> npm ERR! or use npm ERR! reportbug --attach /vagrant/npm-debug.log npm npm ERR! npm ERR! System Linux 3.2.0-23-generic npm ERR! command "node" "/usr/bin/npm" "install" "-d" npm ERR! cwd /vagrant npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! path /vagrant/node_modules/underscore/package.json npm ERR! code ENOENT npm ERR! message ENOENT, no such file or directory '/vagrant/node_modules/underscore/package.json' npm ERR! errno {} npm ERR! error installing [email protected] npm info unbuild /vagrant/node_modules/request npm ERR! error rolling back [email protected] Error: UNKNOWN, unknown error '/vagrant/node_modules/request' npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /vagrant/npm-debug.log npm not ok If I rerun npm install -d, the error changes to whatever the next package is... if I keep running it it over and over again, it eventually doesn't complain anymore and outputs: (ssh) /vagrant git:master ? npm install -d npm info it worked if it ends with ok npm info using [email protected] npm info using [email protected] npm info preinstall [email protected] npm info build /vagrant npm info linkStuff [email protected] npm info install [email protected] npm info postinstall [email protected] npm info ok However, none of the dependencies for any of these packages get installed. For instance, cheerio has a few dependencies, so when I try running my test suite, I'm greeted with: (ssh) /vagrant git:master ? mocha --compilers coffee:coffee-script --watch spec/* node.js:201 throw e; // process.nextTick error, or 'error' event on first tick ^ Error: Cannot find module 'cheerio-select' at Function._resolveFilename (module.js:332:11) at Function._load (module.js:279:25) at Module.require (module.js:354:17) What gives? I'm on Ubuntu Precise64 in a Vagrant virtual box.

  Read the article

• Amazon EC2 Instance - m1.medium Ubuntu 12.04 - Started to crash three days ago

  - by Joy

  The environment: Amazon EC2 Instance - m1.medium Ubuntu 12.04 Apache 2.2.22 - Running a Drupal Site Using MySQL DB Server RAM info: ~$ free -gt total used free shared buffers cached Mem: 3 1 2 0 0 0 -/+ buffers/cache: 0 2 Swap: 0 0 0 Total: 3 1 2 Hard drive info: Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 4.7G 2.9G 62% / udev 1.9G 8.0K 1.9G 1% /dev tmpfs 751M 180K 750M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 0 1.9G 0% /run/shm /dev/xvdb 394G 199M 374G 1% /mnt The problem About two days ago the site started failing becaue the MySQL server was shut down by Apache with the following message: kernel: [2963685.664359] [31716] 106 31716 226946 22748 0 0 0 mysqld kernel: [2963685.664730] Out of memory: Kill process 31716 (mysqld) score 23 or sacrifice child kernel: [2963685.664764] Killed process 31716 (mysqld) total-vm:907784kB, anon-rss:90992kB, file-rss:0kB kernel: [2963686.153608] init: mysql main process (31716) killed by KILL signal kernel: [2963686.169294] init: mysql main process ended, respawning That states that the VM was occupying 0.9GB, but my Ram has 2GB free, so 1GB was still left free. I understand that in Linux applications can allocate more memory than physically available. I don't know if this is the problme, it's the first time that it has started to happen. Obviously, the MySQL server tries to restart, but there's no memory for it apparently and it won't restart. Here is its error log: Plugin 'FEDERATED' is disabled. The InnoDB memory heap is disabled Mutexes and rw_locks use GCC atomic builtins Compressed tables use zlib 1.2.3.4 Initializing buffer pool, size = 128.0M InnoDB: mmap(137363456 bytes) failed; errno 12 Completed initialization of buffer pool Fatal error: cannot allocate memory for the buffer pool Plugin 'InnoDB' init function returned error. Plugin 'InnoDB' registration as a STORAGE ENGINE failed. Unknown/unsupported storage engine: InnoDB [ERROR] Aborting [Note] /usr/sbin/mysqld: Shutdown complete I simply restarted the Mysql service. About two hours later it happened again. I restarted it. Then it happened again 9 hours later. So then I thought of the MaxClients parameter of apache.conf, so I went to check it out. It was set at 150. I decided to drop it down to 60. As so: <IfModule mpm_prefork_module> ... MaxClients 60 </IfModule> <IfModule mpm_worker_module> ... MaxClients 60 </IfModule> <IfModule mpm_event_module> ... MaxClients 60 </IfModule> Once I did that, I had the apache2 service restart and it all went smoothly for 3/4 of a day. Since at night the MySQL service shut down once again, but this time it wasn't killed by the Apache2 service. Instead it called the OOM-Killer with the following message: kernel: [3104680.005312] mysqld invoked oom-killer: gfp_mask=0x201da, order=0, oom_adj=0, oom_score_adj=0 kernel: [3104680.005351] [<ffffffff81119795>] oom_kill_process+0x85/0xb0 kernel: [3104680.548860] init: mysql main process (30821) killed by KILL signal Now I'm out of ideas. Some articles state that the ideal thing to do is change the kernel behaviour with the following (include it to the file /etc/sysctl.conf ) vm.overcommit_memory = 2 vm.overcommit_ratio = 80 So no overcommits will take place. I'm wondering if this is the way to go? Keep in mind I'm no server administrator, I have basic knowldege. Thanks a bunch in advance.

  Read the article

• Apache config that uses two document roots based on whether the requested resource exists in the first

  - by mattalexx

  Background I have a client site that consists of a CakePHP installation and a Magento installation: /web/example.com/ /web/example.com/app/ <== CakePHP /web/example.com/app/webroot/ <== DocumentRoot /web/example.com/app/webroot/store/ <== Magento /web/example.com/config/ <== Site-wide config /web/example.com/vendors/ <== Site-wide libraries The server runs Apache 2.2.3. The problem The whole company has FTP access and got used to clogging up the /web/example.com/, /web/example.com/app/webroot/, and /web/example.com/app/webroot/store/ directories with their own files. Sometimes these files need HTTP access and sometimes they don't. In any case, this mess makes my job harder when it comes to maintaining the site. Code merges, tarring the live code, etc, is very complicated and usually requires a bunch of filters. Abandoned solution At first, I thought I would set up a new subdomain on the same server, move all of their files there, and change their FTP chroot. But that wouldn't work for these reasons: Firstly, I have no idea (and neither do they remember) what marketing materials they've sent out that contain URLs to certain resources they've uploaded to the server, using the main domain, and also using abstract subdomains that use the main virtual host because it has ServerAlias *.example.com. So suddenly having them only use static.example.com isn't feasible. Secondly, The PHP scripts in their projects are potentially very non-portable. I want their files to stay in as similar an environment as they were built as I can. Also, I do not want to debug their code to make it portable. Half-baked solution After some thought, I decided to find a way to section off the actual website files into another directory that they would not touch. The company's uploaded files would stay where they were. This would ensure that I didn't break any of their projects that needed HTTP access. It would look something like this: /web/example.com/ <== A bunch of their files are in here /web/example.com/app/webroot/ <== 1st DocumentRoot; A bunch of their files are in here /web/example.com/app/webroot/store/ <== Some more are in here /web/example.com/site/ <== New dir; Contains only site files /web/example.com/site/app/ <== CakePHP /web/example.com/site/app/webroot/ <== 2nd DocumentRoot /web/example.com/site/app/webroot/store/ <== Magento /web/example.com/site/config/ <== Site-wide config /web/example.com/site/vendors/ <== Site-wide libraries After I made this change, I would not need to pay attention to anything except for the stuff within /web/example.com/site/ and my job would be a lot easier. I would be the only one changing stuff in there. So here's where the Apache magic would happen: I need an HTTP request to http://www.example.com/ to first use /web/example.com/app/webroot/ as the document root. If nothing is found (no miscellaneous uploaded company projects are found), try finding something within /web/example.com/site/app/webroot/. Another thing to keep in mind is, the site might have some problems if the $_SERVER['DOCUMENT_ROOT'] variable reads /web/example.com/app/webroot/ but the actual files are within /web/example.com/site/app/webroot/. It would be better if the DOCUMENT_ROOT environment variable could be /web/example.com/site/app/webroot/ for anything within the /web/example.com/site/app/webroot/ directory. Conclusion Is my half-baked solution possible with Apache 2.2.3? Is there a better way to solve this problem?

  Read the article

• How to stop windows resizing when the monitor display channel is turned off / switched to different source

  - by Heartspeace

  Have a new 6870 ati radeon adapter with its drivers set to 1080p 60hz resolution hooked up to a 2008 47" high end Samsung HDMI based TV. However, when the tv is turned to a different hdmi input -(when I come back into windows) somehow Windows decides to resize all the open apps to a lower resolution - including some of the side docked hidden pop-outs. When it resizes those though - it just sticked the pop-outs in the middle of the screen and all the resized windows from the open applications in the top left corner - all of them stacked on top of each other and resized to the smaller resolution. The things that seem to be ok after returning are the icons on the desktop, the taskbar, and the sidebar. Anyone have any knowledge of 1) how this happens 2) why it happens 3) how to stop it from resizing the applications and some of the docked pop-outs (they are not really resized after returning - they are just stuck in the middle of the screen approximately where they would be if the right or bottom sidebar should be if the screen was resized to that lower resolution). My hypothesis is that upon losing HDMI signal - that Windows is told by something (driver, or windows itself) that the resolution to be without a signal being present (noting that HDMI signals and handshakes are two way on HDMI devices. If it loses the signal or the tv is switched to another device - then the display adapter must figure that out and tell Windows or figures it out and designs randomly to change the display size). Any and all help is most appreciated. I asked AMD/ATI - but they said they don't know why or how this is happening. I was hoping that maybe this is THE place that the super users truly go to - those that develop display adapter drivers, or that dive deeply into these areas of windows. If there is better sites or just competing sites - please advise - noting I have already written AMD/ATI. HP Response / Additions 4/7/2011 It is really nice to get your reply Shinrai. (BTW is it proper etiquette on these forums to have a discussion?) Yet 'only one issue' - I am using a single display in this case - so Windows doesn't move application windows to another desktop. Windows (or something) decides to shrink the desktop it currently has and resize all windows to the maximum size of the desktop. As such I would be glad if Windows would just keep the current size of the one desktop that is in operation. I also know that this does NOT happen on monitors connected with DVI. There I have had one and two monitors setup and it doesn't resize those screens at all when disconnecting monitors, turning them off, whatever... they stay solid - everything in place - to such an extent that if you forgot the other monitor is off - you will have troubles finding some windows without using one of the control app utilities. So if I could even get the HDMI handling by Windows (or the display driver) ( 1] which is doing this anyway the display driver or Windows - and 2] where is that other resolution size (1024x768) coming from - its not the smallest and its not the largest?) to be having like DVI - Life would be golden (for this aspect anyway). ** found others with same problem in this thread: http://hardforum.com/showthread.php?t=1507324 Thanks, HP

  Read the article

• My computer freezes irregurarly

  - by Manhim

  My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

  Read the article

• .AVI Files randomly cease to open, other strange errors too

  - by Ben Franchuk

  I Recently (a couple weeks ago) downloaded the complete series of Seinfeld, all in varying file type. I Watched them in sequence according to season and to airing date, and all was well. All of the files played fine with my media player of choice ("BS Player"), and once I had finished, I went onto watch some other TV I had previously downloaded (The U.S. Series of "The Office"), and after then, some other film and then some music, over the following weeks (keep in mind all of these files are all on the same Hard Drive). Later then, More recently, I Went back to watching Seinfeld. The episodes played well as they did before- with the exclusion of a few in Season 7. I Have not tested all of the episodes in the season, but upon inspection, the majority of them are experiencing this problem; the problem being simply that they don't open! BS Player says that the files are either damaged or that the codecs to play the files are not on my computer-- however I am certain that the files DO have the codecs, and I am pretty sure that they are NOT DAMAGED either. I Have played the files with other players (such as VLC, Media Player Classic, and Windows Media Player), too, only to the same result; of them not opening. Seemingly the only way that I can differentiate between a damaged file and a non-damaged file are the way that the icon shows in Windows Explorer. For example, the below image is how explorer shows the information of a file that is non-damaged... ...and below is how a damaged file appears... The most disturbing and confusing part of this, though, is the last episode in the season- It opens, but not as a video- Instead, as a 1 Hour, 16 Minute, and 35 Second Audio file! The file plays a song for the first 4 or so minutes, and then is pretty much silent (except for some extremely quiet noise) until the last minute or so, when a random array of chopped up sounds and beeping noises play. I Do not recognise the song at the beginning of the file, but by the sounds of it, it is a song by the artist "Mr. Oizo," who's complete works I downloaded a couple weeks before now; and a bit before then I had finished downloading season 9 (not affected by these problems) of Seinfeld. I'd also like to note that the file I told of earlier (which played audio instead of video) reads as the same size as the other files in the season (around 175 MB) and also opens as a video clip. I Have NEVER experienced any of these problems in the past, and they seem to be only effecting the one season of my downloaded TV. The problems have not arisen with any of the other files on my Hard Drive, or any of the files downloaded around the time or after the time of which I downloaded season 7 of Seinfeld- or at least to my noticing. I Use the hard drive these files are located on almost every day, so could that be the cause of these problems? Is this a sign that my HDD is soon going to die? If it helps, the HDD is a Western Digital MyBook 1.5 TB 7500 RPM. It is connected to the computer via U.S.B. 2.0. EDIT! I noticed that this problem is now occurring with Season 9 of Seinfeld- and, presumably, other files on the drive I have yet to check. Please, If you have ANY IDEA AT ALL on what may be causing this or how to fix it, do tell me!

  Read the article

• How do I reset/update my BIOS for Optiplex GX280?

  - by Sam Langlhey

  So far this has been a nightmare for me, which has been frustrating me constantly. I am using Dell Optiplex GX280 with Windows XP home edition, which is running a BIOS version A04. Recently, i've rebooted the pc to find out that its not booting. It will get to the Windows boot up screen with the progress bar but only to restart to the same process again, over and over. Frustrated that I am, i've inserted the Windows recovery CD to at least either repair of reinstall the operating system to find out that was not possible. I hit F8 to have the boot options, each of the boot option that I've selected gave me an error saying: "Selected boot device is not available." Right after that, I went to the BIOS setting and did a diagnostic test, which recognized all the Boot devices onboard. Now, I cannot even repair of reinstall Windows XP, because the system is not booting from none of the boot devices. The surprise is when I removed the hard-drive from the computer and loaded it on into another computer successfully; that's right, there is nothing wrong with the hard drive. After that I was totally puzzled. I found a few pointers online saying that the BIOS start-up block might be corrupted itself and I might need to flash/update the BIOS. I found the detailed instruction on how to create a Boot up disk by downloading the BIOS firmware from the manufacture's website. I did exactly as instructed below: Download the latest version or your choose version of BIOS file for your computer or motherboard from the manufacturer’s support site. Rename the downloaded file to AMIBOOT.ROM. Copy the file to a floppy disk. Insert the floppy disk to the floppy drive. Turn on the system. After I did that and powered on the PC to boot from the floppy drive, it gave me this error message: "Non-System Disk or Disk Error. Replace and Strike any key when ready." I did all that, and I kept on pressing [Ctrl]+[Home] to force it, but it did not did any satisfying result. Desperate as I am, my next attempt is to try the instruction below. Since I want to be ready, in the event it does not work, do you have any solution that you can provide? Please keep in mind that I cannot boot from any of the devices at this moment. My only hope now is to come on with a solution that will work through the Floppy drive, since that's the only drive that affected. Thank you very much for your advice and support in advance. To create a Windows startup disk, insert a floppy disk into the drive of a similarly configured, working Windows XP system, launch My Computer, right-click the floppy disk icon, and select the Format command from the context menu. When you see the Format dialog box, leave all the default settings as they are and click the Start button. Once the format operation is complete, close the Format dialog box to return to My Computer, double-click the drive C icon to access the root directory, and copy the following three files to the floppy disk: Boot.ini NTLDR Ntdetect.com

  Read the article

• Publishing an Excel spreadsheet using Microsoft SBS 2008 to a web page that is viewable by mobile ph

  - by Dave Heath

  I am getting well out of my “superuser” depth here and would love some support. At work we have an Excel workbook (*.xls format circa Office 2003) which maintains our “engineers” timesheet. This handles what events we are doing across the year and how many “work units” it is. As far as a workbook goes, it is fairly simple with just a few =SUM(range) cells and some linked across sheets (12 sheets, one for each month) It is stored on a server, in a folder that provides “management” with full access and “engineers” with read-only access. The workbook itself is read-only for “engineers” and full access for “management”. I think these permissions are controlled through Active Directory. The workbook is protected with a password, assumingly to allow “management” to edit it even if they are working at a terminal logged in as an “engineer”. This protection prevents “engineers” from going to certain cells to see formulae and therefore editing them. The workbook has a macro which saves and closes it ten minutes after opening. This is to stop other “management” from being locked out by any one person who has logged in with editing privileges. I hope this is making sense to someone... :S Now then, we have Microsoft Small Business Server 2008. We have a shiny new web-based login for when we are offsite so we can get to Exchange webmail and our internal site (which uses Sharepoint 3.0). “Management” would like to be able to publish this timesheet automatically after changes (they don’t want to have to do anything different to what they are currently doing) so that using an iPhone “engineers” can check on it while out of the office. I am currently having a look at “Excel Services” for Office 2007 on TechNet but I am not sure if I am running down the right garden path at the moment. < EDIT This seems to suggest that I have to have Sharepoint Server 2007, with no mention of Sharepoint 3.0... ... "MOSS builds on WSS by adding both core features as well as end user web parts" - Wikipedia entry for Microsoft Office SharePoint Server (MOSS) this is not good news... "...and using the ASP.NET APIs, web parts can be written to extend the functionality of WSS." Wikipedia entry for Windows Sharepoint Services. Could this bring back what I need? Is this good news? Do I need to start learning ASP.NET? This link here implies that we need MOSS to do what I want and the bosses say we aint' getting it. http://serverfault.com/questions/20198/what-is-some-cool-things-you-can-do-with-sharepoint-2007/22128#22128 Back to the drawing board. < /EDIT Please could someone suggest some “further reading” for me to help point me in the right direction or to put me back on the right track. Many thanks. I will try to keep this up to date with how I get on.

  Read the article

• Attempting Unauthorized operation - SQL 2008 R2 install

  - by Fred L

  I've been banging against this for a few days. Keep getting this unauthorized error when trying to install SQL 2008 R2 on a Windows 7 machine. I've changed permissions on the key, does not fix... Created an admin user, gave specific permissions on that key, does not fix... Disabled all firewalls, installed from a local admin, does not fix... I'm out of patience and ideas! :) Help? 2012-07-06 13:09:11 Slp: Sco: Attempting to set value AppName 2012-07-06 13:09:11 Slp: SetValue: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VSTAHostConfig\SSIS_ScriptComponent\2.0, Name = AppName 2012-07-06 13:09:11 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine 2012-07-06 13:09:11 SSIS: Processing Registry ACLs for SID 'S-1-5-21-2383144575-3599344511-819193542-1074' 2012-07-06 13:09:11 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\100 2012-07-06 13:09:11 SSIS: Setting permision on registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100. 2012-07-06 13:09:11 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: Sco: Attempting to set security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: Sco: Attempting to normalize security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: Sco: Attempting to normalize security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:11 Slp: Prompting user if they want to retry this action due to the following failure: 2012-07-06 13:09:11 Slp: ---------------------------------------- 2012-07-06 13:09:11 Slp: The following is an exception stack listing the exceptions in outermost to innermost order 2012-07-06 13:09:11 Slp: Inner exceptions are being indented 2012-07-06 13:09:11 Slp: 2012-07-06 13:09:11 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException 2012-07-06 13:09:11 Slp: Message: 2012-07-06 13:09:11 Slp: Attempted to perform an unauthorized operation. 2012-07-06 13:09:11 Slp: Data: 2012-07-06 13:09:11 Slp: WatsonData = 100 2012-07-06 13:09:11 Slp: DisableRetry = true 2012-07-06 13:09:11 Slp: Inner exception type: System.UnauthorizedAccessException 2012-07-06 13:09:11 Slp: Message: 2012-07-06 13:09:11 Slp: Attempted to perform an unauthorized operation. 2012-07-06 13:09:11 Slp: Stack: 2012-07-06 13:09:11 Slp: at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd) 2012-07-06 13:09:11 Slp: at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext) 2012-07-06 13:09:11 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections) 2012-07-06 13:09:11 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key) 2012-07-06 13:09:11 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.GetAccessControl() 2012-07-06 13:09:11 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite) 2012-07-06 13:09:11 Slp: ---------------------------------------- 2012-07-06 13:09:24 Slp: User has chosen to retry this action 2012-07-06 13:09:24 Slp: Sco: Attempting to normalize security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: Sco: Attempting to normalize security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2383144575-3599344511-819193542-1074) 2012-07-06 13:09:24 Slp: Prompting user if they want to retry this action due to the following failure: 2012-07-06 13:09:24 Slp: ----------------------------------------

  Read the article

• Problem installing build-essential and upgrading g++ on Ubuntu 8.04

  - by ehsanul

  I'm having some trouble with dependencies it seems, but myself don't really know how to resolve the issue. Here's the output: ~:) sudo apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: build-essential: Depends: g++ (>= 4:4.3.1) but 4:4.2.3-1ubuntu6 is to be installed E: Broken packages ~:) sudo apt-get install g++ Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: g++-4.3 (>= 4.3.1-1) but it is not going to be installed Depends: gcc-4.3 (>= 4.3.1-1) but it is not installable E: Broken packages ~:) Edit: I just tried aptitude instead of apt-get, as suggested. Doesn't work, had other problems: ~:) sudo aptitude install build-essential [sudo] password for ehsanul: Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Building tag database... Done The following packages are BROKEN: g++ g++-4.3 libstdc++6-4.3-dev The following packages have been automatically kept back: dpkg-dev fakeroot libdns35 libisc35 linux-libc-dev patch The following NEW packages will be automatically installed: libgmp3c2 libmpfr1ldbl The following packages have been kept back: adobe-flashplugin bind9-host dnsutils gvfs gvfs-backends gvfs-fuse libatm1 libbind9-30 libgvfscommon0 libisccc30 libisccfg30 liblwres30 libnautilus-extension1 linux-headers-2.6.24-24 linux-headers-2.6.24-24-generic linux-image-2.6.24-24-generic nautilus nautilus-data The following NEW packages will be installed: libgmp3c2 libmpfr1ldbl The following packages will be upgraded: build-essential The following partially installed packages will be configured: timidity 2 packages upgraded, 4 newly installed, 0 to remove and 24 not upgraded. Need to get 775kB/6265kB of archives. After unpacking 20.3MB will be used. The following packages have unmet dependencies: libstdc++6-4.3-dev: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libstdc++6 (>= 4.3.2-1ubuntu11) but 4.2.4-1ubuntu4 is installed. g++-4.3: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: gcc-4.3 (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libc6 (>= 2.8~20080505) but 2.7-10ubuntu4 is installed. g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc-4.3 (>= 4.3.1-1) which is a virtual package. Resolving dependencies... The following actions will resolve these dependencies: Keep the following packages at their current version: build-essential [11.3ubuntu1 (hardy, now)] g++ [4:4.2.3-1ubuntu6 (hardy-updates, now)] g++-4.3 [Not Installed] libstdc++6-4.3-dev [Not Installed] Score is -9852 Accept this solution? [Y/n/q/?]

  Read the article

• can't connect 2 subnets through RRAS 2008 r2

  - by mcdwight6

  I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

  Read the article

• File Server - Storage configuration: RAID vs LVM vs ZFS something else... ?

  - by privatehuff

  We are a small company that does video editing, among other things, and need a place to keep backup copies of large media files and make it easy to share them. I've got a box set up with Ubuntu Server and 4 x 500 GB drives. They're currently set up with Samba as four shared folders that Mac/Windows workstations can see fine, but I want a better solution. There are two major reasons for this: 500 GB is not really big enough (some projects are larger) It is cumbersome to manage the current setup, because individual hard drives have different amounts of free space and duplicated data (for backup). It is confusing now and that will only get worse once there are multiple servers. ("the project is on sever2 in share4" etc) So, I need a way to combine hard drives in such a way as to avoid complete data loss with the failure of a single drive, and so users see only a single share on each server. I've done linux software RAID5 and had a bad experience with it, but would try it again. LVM looks ok but it seems like no one uses it. ZFS seems interesting but it is relatively "new". What is the most efficient and least risky way to to combine the hdd's that is convenient for my users? Edit: The Goal here is basically to create servers that contain an arbitrary number of hard drives but limit complexity from an end-user perspective. (i.e. they see one "folder" per server) Backing up data is not an issue here, but how each solution responds to hardware failure is a serious concern. That is why I lump RAID, LVM, ZFS, and who-knows-what together. My prior experience with RAID5 was also on an Ubuntu Server box and there was a tricky and unlikely set of circumstances that led to complete data loss. I could avoid that again but was left with a feeling that I was adding an unnecessary additional point of failure to the system. I haven't used RAID10 but we are on commodity hardware and the most data drives per box is pretty much fixed at 6. We've got a lot of 500 GB drives and 1.5 TB is pretty small. (Still an option for at least one server, however) I have no experience with LVM and have read conflicting reports on how it handles drive failure. If a (non-striped) LVM setup could handle a single drive failing and only loose whichever files had a portion stored on that drive (and stored most files on a single drive only) we could even live with that. But as long as I have to learn something totally new, I may as well go all the way to ZFS. Unlike LVM, though, I would also have to change my operating system (?) so that increases the distance between where I am and where I want to be. I used a version of solaris at uni and wouldn't mind it terribly, though. On the other end on the IT spectrum, I think I may also explore FreeNAS and/or Openfiler, but that doesn't really solve the how-to-combine-drives issue.

  Read the article

• Why are USB 2.0 devices crashing my system?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Choice of an OS for a home ZFS NAS

  - by OlafM

  I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

  Read the article

• Pushing DNSSEC updates with offline keys

  - by eggyal

  In a non-professional capacity, I look after the DNS of some 18 domains: mostly personal/vanity domains for immediate family. I outsource the whole shebang to an inexpensive managed hosting provider with a web interface through which I manage the zones; since the provider also offers DNSSEC, I have successfully deployed that too. These domains are so unimportant that an attack targetted against them seems much less likely than a general compromise of my provider's systems, at which point the records of all their customers might be changed to misdirect traffic (perhaps with extremely long TTLs). DNSSEC could protect against such an attack, but only if the zone's private keys are not held by the hosting provider. So, I wonder: how can one keep DNSSEC private keys offline yet still transfer signed zones to an outsourced DNS host? The most obvious answer (to me, at least) is to run one's own shadow/hidden master (from which the provider can slave) and then copy offline-signed zonefiles to the master as required. The problem is that the only machine I (want to*) control is my personal laptop, which usually connects from a typical home ADSL (behind NAT over a dynamically-assigned IP address). Having them slave from that (e.g. with a very long Expiry time on the zone for periods when my laptop is offline/unavailable) would not only require a Dynamic DNS record from which they can slave (if indeed they can slave from a named host rather than a static IP address), but would also involve me running a DNS server on my laptop and opening both it and my home network up to the incoming zone transfer requests: not ideal. I would prefer a much more push-oriented design, whereby my laptop initiates transfer of offline-signed zonefiles/updates to the provider's servers. I looked into whether nsupdate could fit the bill: documentation is a little sketchy, but my testing (with BIND 9.7) suggests it can indeed update DNSSEC zones, but only where the server holds the keys to perform the zone signing; I have not found a way to have it take an update including the relevant RRSIG/NSEC/etc. records and have the server accept them. Is this a supported use-case? If not, I suspect the only solutions which could fit the bill will involve non-DNS-based transfer of the zone updates and would welcome recommendations that are supported by (hopefully inexpensive) hosting providers: SFTP/SCP? rsync? RDBMS replication? Proprietary API? Finally, what would be the practical implications of such a setup? Key rotation is jumping out at me as being an obvious difficulty, especially if my laptop is offline for extended periods. But the zones are extremely stable, so perhaps I could get away with long-lived ZSKs**...? * Whilst I could run a shadow/hidden master on e.g. an outsourced VPS, I dislike the overhead of having to secure / manage / monitor / maintain yet another system; not to mention the additional financial costs of so doing. ** Okay, this would enable a concerted attacker to replay outdated records—but the risk and impact of such are both tolerable in the case of these domains.

  Read the article

• IPv6: Should I have private addresses?

  - by AlReece45

  Right now, we have a rack of servers. Every server right now has at least 2 IP addresses, one for the public interface, another for the private. The servers that have SSL websites on them have more IP addresses. We also have virtual servers, that are configured similarly. Private Network The private range is currently just used for backups and monitoring. Its a gigabit port, the interface usage does not usually get very high. There are other technologies we're considering using that would use this port: iSCSI (implementations usually recommends dedicating an interface to it, which would be yet another IP network), VPN to get access to the private range (something I'd rather avoid) dedicated database servers LDAP centralized configuration (like puppet) centralized logging We don't have any private addresses in our DNS records (only public addresses). For our servers to utilize the correct IP address for the right interface (and not hard code the IP address) probably requires setting up a private DNS server (So now we add 2 different dns entries to 2 different systems). Public Network Our public range has a variety of services include web, email, and ftp. There is a hardware firewall between our network and the "public" network. We have (relatively secure) method to instruct the firewall to open and close administrative access (web interfaces, ssh, etc) for our current IP address. With either solution discussed, the host-based firewalls will be configured as well. The public network currently runs at a dedicated 20Mbps link. There are a couple of legacy servers with fast-ethernet ports, but they are scheduled for decommissioning. All of the other production boxes have at least 2 Gigabit Ethernet ports. The more traffic-heavy servers have 4-6 available (none is using more than the 2 Gigabit ports right now). IPv6 I want to get an IPv6 prefix from our ISP. So at least every "server" has at least one IPv6 interface. We'll still need to keep the IPv4 addressees up and available for legacy clients (web servers and email at the very least). We have two IP networks right now. Adding the public IPv6 address would make it three. Just use IPv6? I'm thinking about just dumping the private IPv4 range and using the IPv6 range as the primary means of all communications. If an interface starts reaching its capacity, utilize the newly free interfaces to create a trunk. It has the advantage that if either the public or private traffic needs to exceed 1Gbps. The traffic for each interface is already analyzed on a regular basis to predict future bandwidth use. In the rare instances where bandwidth unexpected peaks: utilize QoS to ensure traffic (like our limited SSH access) is prioritized correctly so the problem can be corrected (if possible, our WAN is the bottleneck right now). It also has the advantage of not needing to make an entry for every private address. We may have private DNS (or just LDAP), but it'll be much more limited in scope with less entries to duplicate. Summary I'm trying to make this network as "simple" as possible. At the same time, I want to make sure its reliable, upgradeable, scalable, and (eventually) redundant. Having one IPv6 network, and a legacy IPv4 network seems to be the best solution to me. Regarding using assigned IPv6 addresses for both networks, sharing the available bandwidth on one (more trunked if needed): Are there any technical disadvantages (limitations, buffers, scalability)? Are there any other security considerations (asides from firewalls mentioned above) to consider? Are there regulations or other security requirements (like PCI-DSS) that this doesn't meet? Is there typical software for setting up a Linux network that doesn't have IPv6 support yet? (logging, ldap, puppet) Some other thing I didn't consider?

  Read the article

• WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

  - by kobaltz

  Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

  Read the article

• why is my centos, nginx, php,mysql server using so much memory

  - by kb2tfa

  i'm not sure where the problem lies. I have: centos 6 mysql php php-fpm wordpress (1 site). this is a dedicated server i'm learning on. as soon as i ran the web url the memory slammed to 125% of a 512k server, i had to upgrade to 1gig, so i'm not sure where the problem lies. I thought by switching to nginx from apache i would have more memory free, but i'm still stuck with the problem. before launching the site with nginx and mysqld running the site was about 5% memory. I reanamed my "my-small.cnf" to my.cnf and put in my /etc folder where the original was, but that seems not to have done it. after looking at my TOP results, i'm starting to think it may be php-fpm eating my memory, but not sure. is php-fpm the preferend way or is there something better to use. I read about possible memory leaks in php-fpm. here is what i have: php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. include=/etc/php-fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Default Value: none pid = /var/run/php-fpm/php-fpm.pid ; Error log file ; Default Value: /var/log/php-fpm.log error_log = /var/log/php-fpm/error.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes ;daemonize = yes ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf end php-fpm.conf

  Read the article

• Set up lnux box for hosting a-z [apache mysql php ssl]

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure Virtualhosts for SSL, setting up a CA, setting up SFTP with openSSH, or anything else would be appreciated.

  Read the article

• Hard drive write speed - finding a lighter antivirus?

  - by Shingetsu

  I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

  Read the article

• What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

  - by Tegeril

  Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

  Read the article

• How does the Cloud compare to Colocation? And development too

  - by David

  Currently I/we run a SaaS web application where each subscriber has their own physical instance of the application in addition to their own database. The setup has each web application instance deployed on two different IIS boxes both for load-balancing and redundancy (the machines have their Windows Update install times 12 hours apart, for example). Databases are mirrored on two different SQL Server 2012 machines with AlwaysOn for uptime. I don't make use of SQL Server clustering (as it doesn't provide storage-level failover: we don't have a shared storage box). Because it's a Windows setup it means there are two Domain Controllers (we cheat: they're both Mac Minis, 17W each, which keeps our colo power costs low). Finally there's also an Exchange server (Mailbox, Hub Transport and Client Access). One of the SQL Servers also doubles-up as an Exchange Hub Transport. Running costs are about $700 a month for our quarter-rack colocation (which includes power and peering/transfer), then there's about $150 a month for SPLA licensing, so $850 a month in total. Then there's the hard-to-quantify cost of administration, but I reckon I spend a couple of hours a week checking-in on the servers: reviewing event logs, etc. I keep getting bombarded by ads and manufactured news stories about how great "the cloud" is. Back in 2008 when the cloud was taking off I was reading up about the proper "cloud" services like Google AppEngine, where you write in Python against Google's API and that's how they scale your application across servers and also use their database provider for scaling storage. Simple enough to understand. Then came along Amazon, and I understand how Amazon Storage works, but I'm not sure how Amazon Compute works: web application pages don't take much CPU time to compute, how do you even quantify usage anyway? Finally, RackSpace gets in the act and now I'm really confused. RackSpace advertise "Cloud" SQL Server 2012 available for about "$0.70 per hour", going by how they advertise it I thought the "hour" meant the sum of CPU time, IO blocking time, maybe time spent transferring data, so for a low-intensity application that works out pretty cheap then? Nope. I went on to a Sales Chat window and spoke to one of their advisors. They told me the $0.70/hour was actually for every hour the SQL Server is running... but who wants a SQL Server for only a few hours? You're going to need it available 24 hours a day for months on end. $0.70 * 24 * 31 works out at $520 a month, which is rediculously expensive for SQL Server. An SPLA license for SQL Server is only $50 a month or so. That $520 a month does not include "fanatical support", and you also need to stack on top the costs of the host Windows server instance too. From what I can tell, Rackspace's "Cloud" products seem like like an cynical rebranding of an overpriced VPS service, but priced by the hour. I have the same confusion about Windows Azure which uses similar terms to describe the products available, but I think that's because Azure offers both traditional shared webhosting in addition to their own APIs you can target for scalable applications.

  Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >