Search Results

Search found 90516 results on 3621 pages for 'user smith'.

Page 607/3621 | < Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >

• Mac "spsecure" wants to connet to external IP

  - by Sev

  Anybody know what this "spsecure" program is that's installed on my mac? Location /usr/local/sps/spsecure Is it a legitimate program, or is it spyware? Would this question be better asked at serverfault?

  Read the article

• Update to Lion, Cannot boot into Bootcamp partitions, but can use in Parallels

  - by Jon Jester

  Using Snow Leopard had boot camp partitions for both XP and Windows 7. These were both accessible through Parallels 7 or through direct boot through boot camp. Each is on a separate partitioned hard drive. Upgraded to Lion, both were still accessible through Parallels, but have not been able to directly boot into either. Unfortunately is important to me to be able to boot into a least the Windows 7 partition. Have tried virtually everything I can find online. Seen similar issues, but nothing where they were usable virtually but not directly. Nothing works. reFit, correcting the master boot records in Windows with command line, have wiped the Windows 7 partition clean and reinstalled Windows 7 several times 1st using Boot Camp4 drivers then using Boot Camp3 drivers. Have tried resizing the bootcamp partitions. When booting into the Boot Camp partitions directly will go all the way to seeing the desktop before it fails, where I get a Windows error screen. I can see all the disks and their appropriate partitions both in OS X disk utility as well as the Windows installer utility.

  Read the article

• CPU Temperature sensor wrong?

  - by Matias Nino

  Everest Ultimate is suddenly telling me that the CPU temperature (and core temps) for my E6850 Core 2 Duo is 72 degrees Celsius. When I stress-test the machine, the temp goes up to 91 degrees and the CPU actually throttles. System remains stable though. For over a year now, my CPU has run very cool (40's) with a large commercial copper heatsink/fan that I bought separately. To top it off, I removed the cover of the box and felt the cpu heatsink and it wasn't even warm. Is there such a thing as a CPU temp sensor showing the wrong readings? Any tips would help. UPDATE #1 Temp is also just as high in BIOS. So that leads me to believe it's a CPU seating issue (even though I used thermal paste to seat it two years ago when I built the machine) UPDATE #2 Well. I removed the heatsink and cleaned off the original thermal paste (which was somewhat crusty). I polished the surface, re-applied some new paste, and reseated the heat sink. After powering it up, there was no noticeable change in the temp - ideling at 74. Ran the stress test and it went up to 94 degrees before being 100% throttled. I let it sit at 94 degrees for 20 minutes straight and the computer didn't even flinch. I then immediately shut it off and opened the case and felt around. The heatsink was completely cold to the touch. Even the copper rods were cold. The area near contact with the CPU was slightly warm but not hot to touch. Then I ran REALTEMP, which is supposedly more accurate and it told me the CPU was at 104 degrees. (LOL) At this point, I'm thinking no doubt the cpu's sensor is wrong. Sidenote: the BIOS has the latest version so no option to flash there. Reverting hasn't been known to help from what I've read. What pisses me off is the false temps force the CPU to artificially throttle from 3GHz down to 2GHz and my CPU fan is cranking at full force all the time. Should I call intel and tell them to send me another E6850? SOLUTION UPDATE I switched the processor out with another one and got the same obscene temperatures with the new processor followed by a heatsink that was cool to touch. My suspicion in the heatsink was suddenly renewed. I swapped it out with the stock heatsink/fan and lo and behold the temperatures returned to the normal 35C-50C. Even though the thermal paste was visibly flattened out every time I removed it, it looks like the heatsink was still not pressing hard enough on the CPU to effectively conduct the heat. The heatsink is a Masscool 8Wa741, which screws into a standard position on a mount on the back of the MOBO. Only thing I can surmise after 2 years of use was that, over time, the heatsink pressure on the CPU gave way until the heat began to be ineffectively conducted. Lessons learned: Intel CPU's can run SUPER HOT (upwards of 95C) and still be stable. Heatsink's need to be VERY firmly pressed against the CPU to conduct heat.

  Read the article

• Finding which OS a software requires?

  - by Kannan

  How to find a (ie., Portable single executable) software requires a particular OS (Win98, Win98SE, WinME, Win2000, WinXP, Linux). I am using Win98SE in one pc and WinXP in another PC. If I copy/install a portable software or package in win98se, only after installing / executing that software, that program tell us it requires WinXP,. Is any software to find a particular software needs to run only in win98SE or greater. I tried Dependency Walker by Steve Miller but no results. Kindly help to solve this problem.

  Read the article

• Simple bash scripting

  - by Richard Cotton

  I'm trying to get to grips with bash scripting via cygwin. My script is about as simple as it gets. I change the directory to the root of my C drive, and print the new location. #!/usr/bin/bash cd /cygdrive/c pwd is saved in the file chdir.sh in my home directory. I then call ./chdir.sh from the bash prompt. This results in the error : No such file or directorygdrive/c /cygdrive/c/Documents and Settings/rcotton I definitely have a C drive, and the command cd /cygdrive/c works when I call it directly from the bash prompt. I realise that this problem is likely stupidly simple; please can you tell me what I'm doing wrong.

  Read the article

• Does switching Linux distributions trash your home directory?

  - by Stuart Woodward

  I have an Ubuntu installation on my netbook and after trying it out on a bootable USB I have decided to switch to Mint Linux. If I run the Mint installer from the USB will it totally trash my home directory? Or will it be equivalent to an upgrade where the systems files that need to be replaced will change leaving the users folders as is. (Yes, I plan to backup the important files in the /home folders before hand...)

  Read the article

• Install Linux Mint on PC without bootable CD

  - by crosenblum

  Unfortunately my PC's CD drive is not bootable; I have such a mixture of SATA and IDE drives, so until I have more money to redo my controller setup, I can't boot from any cd. Currently, I have a DVD burned with latest version of Linux Mint, and I have an USB drive with an old version of Mint. I have a partition ready to install Linx Mint into, but no idea how to install it, since I can only boot to my hard drive. I am totally unable to boot to CD, so that is definitely out. My main partition is WinXP Pro SP3. Is there software I can use to format my Linux partition, so that I can then just copy Mint over to that partition? Or is there a better way to install linux mint? I have to do it within Windows XP, since that's all that I can boot right now. I have considered Mint4Win, but that doesn't allow a full installation of Linux Mint. Any ideas?

  Read the article

• File recovery from Mac results in random files and extensions – how do I get my data back?

  - by Robsta

  This Mac hard drive was dying. Someone I knew did a file recovery and got as many files as he could. The program (not sure how it was done, or what program it was) dished out a bunch of folders names such as: DIR56.TOC DIR55.CUR DIR54.GPZ DIR53.GZI … and so forth, all the way down to DIR0.LZH. Some of the file extensions I do understand — like .JPEG, or .MOV — but most of them are ones I've never heard of. I've googled some of them like .TOC, wich stands for "table of contents", but I don't understand how to transfer that data back to the Mac. Currently, they are on a Windows machine. They are being transfered onto an external hard drive that the Mac can read. It can also see all the files. However, the few that I tested to see if the Mac recognizes them (like .TOC and .CUR) cannot be opened. Anyone have any idea as to what I should do? There are some important assignments on there I need to get. EDIT: Data transfer was most likely done by: Easy Recover 6 professional (95% sure, no guarantee)

  Read the article

• How to securely generate memorable passwords?

  - by Tim

  Whenever I need new passwords I use some tools to generate those, preferable memorable passwords, but I've been wondering how secure this might actually be. Using The xkcd random number generator is probably pretty bad, cat /dev/random is probably pretty good, but generating memorable passwords seems a bit more tricky. Whenever a program generates a memorable password, it only uses a subset of the total password space available, and it is not clear to me how big this space is. Of course a long password should help in this case, but if the `memorable' part of the program is too predictable, your passwords are not very good in the end. TL;DR: how secure are memorable password generators, given the fact that `memorable' passwords are a subset of total password space? Some tools I know of: pwgen -- seems ok, but passwords are not too memorable Mac Password Assistant - generates memorable passwords but it is unclear to me how this works.

  Read the article

• How do I force Windows 7 to recognize my Projector?

  - by user63564

  I have a new Dell XPS with an NVIDIA GeForce GT 445M and an old (several years) Epson PowerLite Cinema 550 projector. Windows 7 refuses to recognize that the projector is connected under normal conditions (I'll get to the strange condition in a moment). Here are some things that I have already tried: Confirm that the projector continues to work well on my old Windows XP laptop. Confirm that the video cable (HDMI to HDMI) is connected Make sure the Dell laptop is plugged in to wall power at all times Reboot both the computer and the projector Click "Detect" under the "Connect to an External Display" Windows dialog (no reaction) Click "Rigorous Display Detection" under NVIDIA Control Panel (dialog: none found) Checked "Force Television Detection on startup" under "My display is not shown..." in NVIDIA Control Panel (no effect) Here's where it gets weird... My projector has three states: off, standby and on. Standby means the power switch on the back is on, but the projector is effectively off (no picture, no access to menu or controls). When I plug in the HDMI cable while the projector is in standby, Windows detects the projector! It lets me switch to Duplicate, Extend, or Project Only mode, and adjusts the resolution appropriately. A new Generic Plug-n-Play monitor shows up in my device manager. A "Seiko EPSON PJ" display shows up in my NVIDIA control panel. Then if I turn my projector on, Windows no longer recognizes the display. This is true whether I turn the projector on while the HDMI cable is plugged in, or if I unplug the HDMI cable while turning on the projector. Anyone have any ideas, because I'm completely stumped...?

  Read the article

• Search outlook 2003 using a regular expression

  - by Doug T.

  Every week I have to do the same report for my bosses. Our bug tracker sends us emails, and to be sure I caught everything I often need to search Outlook for all the bug email's I've received. If I could search the email subject using a regular exrpession, my life would be much easier. Can I search my inbox using a regular expression in Outlook 2003?

  Read the article

• data recovery from deleted partition

  - by anique

  i recently merged my hard disk partitions f into c using a partition manager, i didnt need data in f but unfortunately i forgot to backup some important office docs in that partition. manager formated f and merged the space into c. is it possible for me to recover from a deleted partition, how will i do that thanks

  Read the article

• Windows 7 on laptop hard drive does not boot after installing Windows to Go on external hard drive

  - by user1687031

  Just successfully installed and ran Windows 8's Windows to Go on a USB external hard drive. However, after shutting down and removing the USB hard disk, whey I to start my laptop (with only Windows 7 installed), but it doesn't boot and trying to repair it doesn't work. It seems that Windows 8 had corrupted the partition table on the laptop's hard drive, causing Windows 7 to fail to boot. How do I fix that and avoid future problems of the same type?

  Read the article

• Linux Kernel Messages: ata1.00: status: { DRDY ERR }

  - by PM

  I am receiving a lot of these messages. Is my HD going to die tomorrow morning? ata1: link is slow to respond, please be patient (ready=0) ata1: device not ready (errno=-16), forcing hardreset ata1: soft resetting link ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: qc timeout (cmd 0xa0) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)

  Read the article

• How do I make some files on my machine accessible via HTTP using Apache?

  - by Lazer

  I did a wget on the source and built the apache binaries correctly. Now what do I need to do to get some documents accessible using HTTP (start some services?)? Also, do I need to group all the files I want to make accessible in some directory and make the directory and its contents accessible or can I just make the individual documents available? I will be providing these links to my colleagues and do not want them to be down, so need to make sure that the apache services are up automatically after a reboot. Does apache have some inbuilt support for this?

  Read the article

• Can I upgrade the CPU in my Lenovo 3000 N100 laptop?

  - by Pavel

  I've got an Intel Core Duo T2300 in my laptop (Lenovo 3000 N100, 0768-49G). Here is what I could find out about it: $ sudo dmidecode # dmidecode 2.11 SMBIOS 2.4 present. 42 structures occupying 1436 bytes. Table at 0x000DC010. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: LENOVO Version: 61ET37WW Release Date: 06/04/07 Address: 0xE6B70 [...] Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: LENOVO Product Name: CAPELL VALLEY(NAPA) CRB [...] Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: U2E1 Type: Central Processor Family: Other Manufacturer: Intel ID: E8 06 00 00 FF FB E9 BF Version: Genuine Intel(R) CPU T2300 @ 1.66GHz Voltage: 3.3 V External Clock: 166 MHz Max Speed: 2048 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T2300 @ 1.66GHz stepping : 8 microcode : 0x39 cpu MHz : 1000.000 cache size : 2048 KB I believe the chipset is "Mobile Intel 945GM Express", but I don't know how to verify it on a Linux system. I'm not sure about the socket, but Intel claims "Sockets Supported: PBGA479, PPGA478". Now, I'd like to upgrade to the fastest compatible CPU available, but I'm a bit lost in all the details. Can you guys help me out with a couple of questions, please? What CPUs can I choose from? (I think it's only the Core2Duo line, but it should be enough for an upgrade) Can I use a 64-bit CPU? Can I use a CPU with a higher FSB than 667 MHz? Do I have to worry about additional cooling, or is it enough to check for similar voltage/TDP values? Thank you!

  Read the article

• How do I make a Data Validation drop-down exclude blanks?

  - by Iszi

  Related: How can I use non-adjacent cells on another sheet for a Data Validation drop-down, and only show non-blank values? For now, I've worked around the above problem by re-arranging my sheet so all the Data Validation Source cells are in one range. I'm leaving the above question open though, because I think it still poses an interesting problem. However, the issue now is that the Data Validation drop-down isn't working in the way I expected it to (and how I believe others are telling me it should). Even though I've got everything into one named range, Excel still shows blanks in a drop-down that references that range. Setup: Sheet 1 A1= (blank) B1= Header A2= 1 B2= Value1 A3= 2 B3= Value2 A4= 3 B4= Value3 A5= 4 B5= (empty) A6= 5 B6= (empty) A7= 6 B7= (empty) Sheet1!B2:B7 is named Validation Sheet2!A1 is set to use Data Validation with a Source =Validation, and in-cell drop-down. The drop-down in Sheet2!A1 shows: Value1 Value2 Value3 . . . (Dots represent blank lines) How can I get rid of these blank lines in the in-cell drop-down, while still including Sheet1!B5:B7 in the Data Validation Source? Note: I nuked the sheet, and tried it again without column A from Sheet1 (putting values from column B in the above example into column A), and it worked fine. Adding Column A back though, brought the blanks back into the Data Validation drop-down. What do I need to do to keep column A as I want it and keep the in-cell drop-down clean?

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• Windows 7 install detects SSD but doesn't list it to install to

  - by Mohamed Meligy

  I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

  Read the article

• Embedded SWF File in CHM Not Running in Windows Vista 64 bit

  - by Ngu Soon Hui

  I embedded video tutorial ( in the format of .swf) inside a chm file, but the video cannot run on Windows Vista/ 7 64 bit. It runs fine, however, on Windows XP. Any idea why this is so?

  Read the article

• How to run a command as admin in MSDos?

  - by tech

  I want to run a dos command in dos prompt, but this dos command is only executed using admin right. So, I can right click the command prompt to run as administrator, but I wanna to run one line of dos command using the admin right, can I run dos command in dos prompt like sudo in DOS cmd? thz u.

  Read the article

• No video playback when using home sharing on iTunes for Windows

  - by Diago

  I recently configured iTunes Home Sharing on my home network. My WHS server is the central library sharing both my Music and Video files. All my videos are encoded into H.264/MP4 format. All my machines are authorized and has access to Home Sharing. All my machines are running the latest version of iTunes 9. On my Snow Leopard machines iTunes happily plays the videos and music with no issues. On the Windows 7 machines however the play button fades for about 2 seconds when selecting a shared video and then nothing happens. The Windows machines are running the latest Community Codec Pack. Music sharing works perfectly on the Windows machines. When accessing the videos through the native WHS media connect sharing as well as through the file share I can play them perfectly on the Windows 7 machines. When adding the file to the iTunes library on the Windows 7 machine it also plays perfectly. Any advice, ideas or suggestions as to how to play the videos I have shared through Home Sharing on Windows 7?

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• Event Tracing for Windows GUI

  - by Ian Boyd

  i want to view tracing events from the Event Tracing for Windows system. As far as i can tell the only client program that exists for connecting to providers is a command line tool that comes with the Microsoft Windows Device Driver Development Kit (DDK), e.g.: tracelog -start "NT Kernel Logger" -f krnl.etl -dpcisr -nodisk -nonet -b 1024 -min 4 -max 16 -ft 10 –UsePerfCounter ... tracelog –stop It then requires a separate command line tool to convert the generated log file into something usable, e.g.: trcerpt krnl.etl -report isrdpc.xml Has nobody come up with a Windows program (ala Performance Monitor, Process Monitor, Event Viewer) that lets me start tracing by pushing a "Go" button, let me see events, and i can stop it with a "Stop" button? Is there GUI for Event Tracing for Windows?

  Read the article

• Can't play stream from TorrentFlux stream

  - by thegreyspot

  Hi I am trying to stream a video from my TorrentFlux-b4rt server. I tried multiple media players, none work. Only VLC was able to produce an error message: input can't be opened: VLC is unable to open the MRL 'mms://...:8080/'. Check the log for details. I have tried multiple computers on different networks and all have the same issue. I am using Windows 7 to play the videos, and the server is Torrentflux-b4rt 1.0-beta2 with ubuntu 9.10. Thank you.

  Read the article

< Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >