Search Results

Search found 19200 results on 768 pages for 'xp mode'.

Page 624/768 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >

• How to create btrfs RAID-1 filesystem (assertion error in mkfs.btrfs)?

  - by amcnabb

  I tried to make a btrfs RAID-1 filesystem in "degraded mode" by following the btrfs UseCases instructions but hit a fatal assertion error. Why is this failing, and is there any workaround? The instructions I followed are at: https://btrfs.wiki.kernel.org/articles/u/s/e/UseCases_8bd8.html The output of the mkfs.btrfs and btrfs filesystem show commands is: # mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 WARNING! - Btrfs Btrfs v0.19 IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kernel.org before using failed to read /dev/sr0 adding device /dev/loop1 id 2 mkfs.btrfs: volumes.c:802: btrfs_alloc_chunk: Assertion `!(ret)' failed. zsh: abort (core dumped) mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 # btrfs filesystem show failed to read /dev/sr0 Label: none uuid: 773908b8-acca-4c30-85c5-6642b06de22b Total devices 1 FS bytes used 28.00KB devid 1 size 223.13GB used 2.04GB path /dev/sda5 Label: none uuid: 0f06f1a8-5f5f-4b92-a55c-b827bcbcc840 Total devices 2 FS bytes used 24.00KB devid 2 size 2.00GB used 0.00 path /dev/loop1 devid 1 size 1.36TB used 20.00MB path /dev/sdd1 Btrfs Btrfs v0.19 # EDIT: It turns out that the filesystem isn't mountable: # mount /dev/sdd1 /mnt/big2 mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # So, why did the mkfs fail, and is there any workaround?

  Read the article

• TV-out worked, now doesn't. May the problem be the cable, TV, driver, OS, graphic card?

  - by Petruza

  I have a CRT TV hooked to the PC, which once worked great, now doesn't. I can't consider getting a newer TV, this one is used in an MAME arcade cabinet so it has to be a CRT for best old school look and feel. It's connected through the TV-out connector of my graphic card. When it worked, I had Windows XP, the same PC and the same card. Now I have windows 7, not sure if the OS switch caused the malfunction as I don't use the TV-out all the time. Can it be an upgrade of the Nvidia driver? I thought it may be the S-video to RCA cable, but tried 3 different cables and neither worked. In fact, one of them, that unlike the other two, has a single RCA output connector instead of two, behaves differently, although it doesn't work, but it does the following: When I open the NVidia settings panel, or when I change a setting and click Apply then the TV flashes for a split second and you can see the windows screen, but then it goes back to blank. So any clues what can be failing here, and some advice? Possible failures, please comment on the one you suspect the most: NVidia driver version Windows version Cable Graphic card's TV out other?

  Read the article

• Remote Desktop Printing With Color

  - by philibertperusse

  Our ACCPACC administration software runs on an off-site dedicated hosted computer, running Windows 2003 Server with a completely different NT DOMAIN. We have many users connecting to that computer remotely to perform administrative tasks such as printing cheques, printing invoices, printing POs, packing slips and so on. Basically the setup is that we are all connecting using Remote Desktop Protocol (local computers are Mac OS.X, XP SP3, Vista and Windows 7). At our office we have a DOCUCOLOR 242 printer. When printing from the ACCPACC software, it prints to the local printer in our office. This is because we are using RDP features to connect printer ressources to the remote computer. This almost works now. I had to install the printer driver software on the remote 2003 Server for the printer sharing to work. Now, everyone is able to print black and white but color is out. NOTES: Normal users on that Windows 2003 server are running as part of a Group Policy Object to restrict what can be done. I took one of these normal users and gave him all domain administrator rights, no effect still B&W only. I took this account and moved it OUT of GPO policies, as a normal account instead, no effect still B&W only. It seems only MY account (which is domain administrator AND a normal account not part of the GPO objects) can actually print with color. This is the account that was used for installing the printer driver software. How can I manage to get everyone to print in color? Any suggestions as to what to try next?

  Read the article

• Android failure to boot on LG [migrated]

  - by Ukavi

  I need to recover data from my AT&T LG Thrill Android Phone Background: My AT&T LG Thrill phone's battery died a couple of days ago because I forgot to charge it. When I charged the phone and tried to turn it on, it showed the LG logo followed by the dropping balls and the AT&T "Rethink Possible" screen. I then get a mesage that the Application Google Services Framework has crashed and the phone goes into a loop with the dropping balls showing again followed by "Rethink Possible" screen. This sequence repeats itself over and over and the phone does not get out of this loop. I have been able to go into the recovery screen (both Safe Mode and the Android Recovery Service) and have cleared cache, etc. However, I DO NOT want to wipe user data and restore to factory settings as this will wipe all of my data (pictures, application data, etc). Solution Needed: I need a suggestion to a way of accessing my data so that I can back it up onto an SD card/computer. I DO NOT want to root the phone as this may void the warranty. What I'm looking for is a way of perhaps putting the original flash image on the micro SD card and then have the phone read that image. Or some other similar solution that will get the phone out of this loop and allow me to get to the data.

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• Encryption setup for Linux NAS?

  - by Daniel

  There's a bazillion hard disk encryption HOWTOs, but somehow I can't find one that actually does what I want. Which is: I have a home NAS running Ubuntu, which is being accessed by a Linux and a Win XP client. (Hopefully MacOS X soon...) I want to setup encryption for home dirs on the NAS so that: It does not interfere with the boot process (since the NAS it tucked away in a cupboard), the home dirs should be accessible as a regular file system on the client(s) (e.g. via SMB), it is easy to use by 'normal' people, (so it does not require SSH-ing to the NAS, mount the encrypted partition on command line, then connecting via SMB, and finally umount the partition after being done. I can't explain that to my mom, or in fact to anyone.) does not store the encryption key the NAS itself, encrypts file meta-data and content (i.e. safe against the 'RIAA' attack, where an intruder should not be able to identify which songs are in your MP3 collection). What I hoped to do was use Samba + PAM. The idea was that on connecting to the SMB server, I'd have to enter the password on the client, which sends it to the server for authentication, which would use the password to mount the encrpytion partition, and would unmount it again when the session was closed. Turns out that doesn't really work, because SMB does not transmit the password in the plain and hence I can't configure PAM to use the incoming password to mount the encrypted patition. So... anything I'm overlooking? Is there any way in which I can use the password entered on the client (e.g. on SMB connect) to initiate mounting the encrypted dir on the server?

  Read the article

• apache2: ssl_error_rx_record_too_long when visiting port 80?

  - by John

  Hi, I have an Ubuntu 10 x64 server edition machine. I got a second IP and configured /etc/network/interfaces like so (actual IPs and gateways removed): auto lo iface lo inet loopback #iface eth0 inet dhcp auto eth0 auto eth0:0 iface eth0 inet static address [ my first IP ] netmask 255.255.255.0 gateway [ my first gateway ] iface eth0:0 inet static address [ my second IP ] netmask 255.255.255.0 gateway [ my second gateway ] /etc/apache2/ports.conf: Listen 80 NameVirtualHost [ my first IP ]:80 NameVirtualHost [ my second IP ]:80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 NameVirtualHost [ my first IP - some site is running SSL successfully using it ]:443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> /etc/apache2/sites-enabled/mysite.conf: <VirtualHost [my second IP ]:80> ServerName mysite.com Include /var/www/mysite.com/djangoproject/apache/django.conf </VirtualHost> Then when visiting http[mysite].com:80 or http[mysite].com (:// removed because serverfault doesn't allow me to post hyperlinks), I get: An error occurred during a connection to [mysite].com. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) My guess is that the configuration file is not being picked up, and apache is therefore looking for the default-ssl file, which is not in conf-enabled. If I were to configure that file properly, it seems I would successfully connect to whatever default directory is specified in the default-ssl file. But I want to connect to my website. Any ideas? Thanks in advance!

  Read the article

• Sharing files between 2 different routers

  - by Chris

  I realize this has been asked before and I have read as much as I could find on the topic but I still need help with this because there are so many different approaches and the ones I am trying aren't working. So I have 2 routers, lets call them A and B. Both have a wireless feature and are active. A is in the basement and receives the internet. There is a TV on the ground floor that is connected to A through an ethernet wire. B is upstairs and gets the internet from A through an ethernet wire. Connected to B, is a desktop running Plex Media Server. What I want to do is make sure devices connected to both routes can access the Plex Media Server. So what I have read is that I should plug in the ethernet wire connecting B to a into a LAN port instead of the WAN port. After that I should turn off DHCP. I have tried this and B stops receiving internet. What am I doing wrong? Another thing I have read is to use Router B in bridge mode but Router B is running openwrt and I have QoS on it so gaming/VoIP/browsing is unaffected by heavy downloading/uploading. I would prefer to keep this active. I realize it might be ineffective if a device in Router A is doing some hardcore downloading but all that stuff is done on Router B anyway so it doesn't matter. Router A can't get openwrt because it is a shitty one provided by Bell. So, how do I proceed with this?

  Read the article

• Authenticated User Impersonation in Classic ASP under IIS7

  - by user52663

  I've recently moved one of our servers from Server 2003 and IIS6 to Server 2008 R2 and IIS7 (technically IIS7.5 I suppose). In doing so I am transitioning a small account management tool written in classic ASP and have run into a problem with user impersonation. Extensive searching hasn't been much help so far. Under IIS6, the site was configured to impersonate the logged-in user. Thus, if a domain admin logged in, he was able to run commands to create user directories, adjust permissions, etc. Using Procmon you can see the processes executing as that user. This worked fine. However, with the same code under IIS7, I am unable to get this behavior. I have enabled Basic Authentication, disabled Anonymous Auth, enabled impersonation and have changed the app pool to classic instead of integrated pipelining. Everything seems to be configured correctly, however, all the processes launched by the classic ASP site continue to run as the default AppPool identity and not the logged-in user. If it matters, programs are being launched with code such as: set Wsh = Server.CreateObject("WScript.Shell") Wsh.Run("cmd.exe /C mkdir D:\users\foo") Monitoring via Procmon shows cmd.exe being run as either "Classic .NET AppPool" or "DefaultAppPool" depending on the pipeline mode. Any suggestions on how to get the classic ASP site to impersonate and execute as the authenticated user would be great. Thanks!

  Read the article

• Iterating through folders and files in batch file?

  - by Will Marcouiller

  Here's my situation. A project has as objective to migrate some attachments to another system. These attachments will be located to a parent folder, let's say "Folder 0" (see this question's diagram for better understanding), and they will be zipped/compressed. I want my batch script to be called like so: BatchScript.bat "c:\temp\usd\Folder 0" I'm using 7za.exe as the command line extraction tool. What I want my batch script to do is to iterate through the "Folder 0"'s subfolders, and extract all of the containing ZIP files into their respective folder. It is obligatory that the files extracted are in the same folder as their respective ZIP files. So, files contained in "File 1.zip" are needed in "Folder 1" and so forth. I have read about the FOR...DO command on Windows XP Professional Product Documentation - Using Batch Files. Here's my script: @ECHO OFF FOR /D %folder IN (%%rootFolderCmdLnParam) DO FOR %zippedFile IN (*.zip) DO 7za.exe e %zippedFile I guess that I would also need to change the actual directory before calling 7za.exe e %zippedFile for file extraction, but I can't figure out how in this batch file (through I know how in command line, and even if I know it is the same instruction "cd"). Anyone's help is gratefully appreciated.

  Read the article

• CentOS OpenVZ fail to boot after kernel update

  - by SkechBoy

  After upgrading to latest OpenVZ kernel CentOS server won't boot. When i try go boot the latest kernel server is stuck at this point: (note that images are taken from virtual kvm) http://i.stack.imgur.com/4lusz.jpg Then i try to start the server on some old kernels and than i get this error message: kernel panic - not syncing - attempted to kill init better shown on this image: http://i.stack.imgur.com/2SReF.jpg Here is some useful information fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2995.7 GB, 2995739688960 bytes 255 heads, 63 sectors/track, 364211 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c4e4 Device Boot Start End Blocks Id System /dev/sda1 1 523 4199044+ 82 Linux swap / Solaris /dev/sda2 524 785 2104515 83 Linux /dev/sda3 786 261869 2097157230 83 Linux /dev/sda4 261870 364211 822062115 83 Linux /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/sda1 none swap sw 0 0 /dev/sda2 /boot ext3 defaults 0 0 /dev/sda3 / ext3 defaults 0 0 /dev/sda4 /home ext3 defaults 0 0 and grub config file: title OpenVZ (2.6.18-274.18.1.el5.028stab098.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.18.1.el5.028stab098.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.18.1.el5.028stab098.1.img title OpenVZ (2.6.18-274.7.1.el5.028stab095.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.7.1.el5.028stab095.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.7.1.el5.028stab095.1.img title OpenVZ (2.6.18-194.8.1.el5.028stab070.4) root (hd0,1) kernel /vmlinuz-2.6.18-194.8.1.el5.028stab070.4 ro root=/dev/sda3 vga=0x317 initrd /initrd-2.6.18-194.8.1.el5.028stab070.4.img Any help is greatly appreciated Thanks.

  Read the article

• Suggestions for Windows 8 migration [closed]

  - by Big Endian

  I'm thinking of migrating to Windows 8. At first I hated it, but I'm pretty sure the Windows 8 model is the future, and I don't particularly want to end up hating the future like my parents, frustrated and bewildered by anything past Windows XP. I'm currently running Windows 7 and my system has been accumulating some problems. It's probably an accumulation of issues from installing too much software, changing firewall settings, installing Ubuntu alongside Windows, and... well I'm not sure, but my computer has been buggy in unexpected ways lately (freezing and unfreezing, display driver crashing and recovering, and what I call "deep freeze/thaw cycle" where the mouse won't even move for a while). I'm good at solving computer problems, but I can't seem to get to the root of these and my best idea for fixing them is making sure I've backed up every file then re-installing the entire OS. Luckily for me, a new OS is just around the corner so this would be a good time to get two things out of the way at once. The problem I see is that the upgrade options I see are all "seamless". I don't want a seamless upgrade. I want to wipe the slate clean and start all over. Does this mean I will have to buy a full, new copy of Windows 8 rather than one of the cheaper upgrading options? Or does it not make since for me to go to Windows 8 given that I have a laptop, not a tablet? Maybe I should just re-install Windows 7, or even call good enough good enough, try to eliminate the bugs, and start with a fresh slate in 2-3 years after this computer eventually dies entirely from (inevitable) hardware failure. What would be the advantages or disadvantages and costs of each option, how would I go about upgrading to Windows 8 if that's the option I choose, and what is your personal opinion about my situation?

  Read the article

• Copy a harddrive from a failed desktop machine using a second working one. [closed]

  - by MrEyes

  Heres the scenario: I have PC-A, an old PC that runs Windows XP but now refuses to boot due to a failed motherboard (or maybe PSU). This PC has a single 80gb IDE drive. I also have PC-B, running Windows Vista, this is working fine. I want to copy all the data off PC-As HDD onto PC-B. To do this I have taken the HDD out of PC-A and connected it as a slave to PC-B. PC-B now boots and sees the additional drive. However, when I attempt to access/copy user folders (i.e. Documents and Settings/[username]/*) I am told that I cannot access the folders due to user permissions. I am doing this under an adminstrator account on PC-B. So the question is, how can I "backup" the data? Preferably without making any changes to the drive contents. The reason for this is that it is possible that PC-A is failing due to a bad PSU, so I intend to replace it before writing off the machine. However I would feel much happier if I had a backup of the data on the HDD.

  Read the article

• Using git through cygwin on windows 8

  - by 9point6

  I've got a windows 8 dev preview (not sure if it's relevant, but I never had this hassle on w7) machine and I'm trying to clone a git repo from github. The problem is that my ~/.ssh/id_rsa has 440 permissions and it needs to be 400. I've tried chmodding it but the any changes on the user permissions gets reflected in the group permissions (i.e. chmod 600 results in 660, etc). This appears to be constant throughout any file in the whole filesystem. I've tried messing with the ACLs but to no avail (full control on my user and deny everyone resulted in 000) here's a few outputs to help: $ git clone [removed] Cloning into [removed]... @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: UNPROTECTED PRIVATE KEY FILE! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Permissions 0660 for '/home/john/.ssh/id_rsa' are too open. It is required that your private key files are NOT accessible by others. This private key will be ignored. bad permissions: ignore key: /home/john/.ssh/id_rsa Permission denied (publickey). fatal: The remote end hung up unexpectedly $ ll ~/.ssh total 6 -r--r----- 1 john None 1675 Nov 30 19:15 id_rsa -rw-rw---- 1 john None 411 Nov 30 19:15 id_rsa.pub -rw-rw-r-- 1 john None 407 Nov 30 18:43 known_hosts $ chmod -v 400 ~/.ssh/id_rsa mode of `/home/john/.ssh/id_rsa' changed from 0440 (r--r-----) to 0400 (r--------) $ ll ~/.ssh total 6 -r--r----- 1 john None 1675 Nov 30 19:15 id_rsa -rw-rw---- 1 john None 411 Nov 30 19:15 id_rsa.pub -rw-rw-r-- 1 john None 407 Nov 30 18:43 known_hosts $ set | grep CYGWIN CYGWIN='sbmntsec ntsec server ntea' I realize I could use msysgit or something, but I'd prefer to be able to do everything from a single terminal Edit: Msysgit doesn't work either for the same reasons

  Read the article

• Getting 502 instead of 503 when all backend servers are down running HAProxy behind Apache

  - by scarba05

  I'm testing running HAProxy as a dedicated load balancer behind Apache 2.2, replacing our current configuration where we use Apache's load balancer. In our current, Apache only, set-up if all the backend (origin) servers are down Apache will serve a 503 service unavailable message. With HAProxy I get a 502 bad gateway response. I'm using a simple reverse proxy rewrite rule in Apache RewriteRule ^/(.*) http://127.0.0.1:8000/$1 [last,proxy] In HAProxy I have the following (running in default tcp mode) defaults log global option tcp-smart-accept timeout connect 7s timeout client 60s timeout queue 120s timeout server 60s listen my_server 127.0.0.1:8000 balance leastconn server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 Testing connecting directly to the load balancer when the backend servers are down: [root@dev ~]# wget http://127.0.0.1:8000/ test.html --2012-05-28 11:45:28-- http://127.0.0.1:8000/ Connecting to 127.0.0.1:8000... connected. HTTP request sent, awaiting response... No data received. So presumably this is down to the fact that HAProxy accepts the connection and then closes it.

  Read the article

• How to set up a serial connection to a Windows 7 computer

  - by oli_arborum

  I need to set up a "dial in" connection to a Windows 7 (Ultimate) computer via a serial null-modem cable to be able to connect from a Windows XP client to that computer and exchange data over IP. Question 1: How do I do that? I did neither find the information via Google nor in the MSDN. Seems like no one tried ever before... ;-) I already managed to install a legacy modem device called "Communications cable between two computers" and found the menu entry "New Incoming Connection..." in Network and Internet Network Connections. When I finish this wizard I get the message that the "Routing and Remote Access service" cannot be started. In the event viewer I see the following error messages: "The currently configured authentication provider failed to load and initialize successfully. The requested name is valid, but no data of the requested type was found." (Source: RemoteAccess, EventID: 20152) "The Routing and Remote Access service terminated with service-specific error The requested name is valid, but no data of the requested type was found." (Source: Service Control Manager, EventID: 7024) The Windows 7 installation is "naked", i.e. no additional software or services are installed. Question 2: Am I on the right path to set up the connection? Question 3: How can I get the Routing and Remote Access service running?

  Read the article

• Which ports are needed for NTLM (Windows Authentication) to connect to SQL Server?

  - by Adam Bellaire

  I've got SQL server running on a machine which is not in a domain, and which is not operating in mixed mode (it's running with "Windows Authentication"). I'm trying to connect to it from a Linux web server running freetds via TCP/IP, using NTLM to authenticate. The firewall on the SQL server is very restrictive. 1433 is open to my web server, but I'm getting conflicting information from the web on what additional ports (TCP/UDP) are needed for NTLM to succeed. It is currently fail; I can talk on 1433 to request NTLM, but the actual authentication always fails. One source says 137, 138, 139, but those are just the NetBIOS ports. Do I really need those? Another source says 135. Still others seem to say 1434... I can't make heads or tails of it. Dammit Jim, I'm a programmer, not a network administrator! EDIT: The exact error message: Msg 18452, Level 14, State 1, Server , Line 0 Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Msg 20002, Level 9, State -1, Server OpenClient, Line -1 Adaptive Server connection failed I am attempting to connect with a remote machine username, i.e. 'servername\username'. Some sources recommend that I set up mirrored accounts on the local and remote machines, but the local machine is running Linux, not IIS under Windows.

  Read the article

• Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

  - by Jonah Goldstein

  I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

  Read the article

• The RTL8111/8168B NIC under Linux and the r8168 driver

  - by nik

  So I've got one of the infamous R8168 Realtek ethernet NIC, which have some problems under Linux. After some research, I found out I had to use the r8168 driver for this card (and not the r8169 which still loads when nothing else is available), which I did. So now everything works fine... Sort of. My download and upload rates are more than halved compared to what I should get. When I test (with eg. speedtest) I get something like 20M (often 15M) in download and 30M in upload, but if I test under Windows (everything is otherwise identical: same ethernet cable, same connection, at the same time of the day (well 5 min apart)...), I get 50M upload/download (which is what I expect). Where can it come from? Here's some info: ~ # lspci [...] 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) ~ # modinfo r8168 filename: /lib/modules/3.2.1-gentoo-r2/net/r8168.ko version: 8.027.00-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <[email protected]> srcversion: 0A6E9F1D4E8E51DE4B6BEE3 alias: pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* alias: pci:v000010ECd00008168sv*sd*bc*sc*i* depends: vermagic: 3.2.1-gentoo-r2 SMP mod_unload [...] ~ # mii-tool -v eth0: negotiated 100baseTx-HD, link ok product info: vendor 00:07:32, model 17 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• Extend RAID 1 (HP SmartArray P410i) running Linux

  - by Oliver

  I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) (sn: removed) array A (SAS, Unused Space: 1335535 MB) logicaldrive 1 (279.4 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1 TB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1 TB, OK) Initially there were two 300GB disks that got replaced by 1TB disks and I now have to extend the logical volume to use that extra space. However, when trying to do so I get the following warning: => ctrl slot=0 ld 1 modify size=max Warning: Extension may not be supported on certain operating systems. Performing extension on these operating systems can cause data to become inaccessible. See ACU documentation for details. Continue? (y/n) Is it safe to say yes or am I at risk of corrupting the file system / loosing data? Rearranging and extending the file system afterwards shouldn't be an issue as I can take the server offline and boot from a gparted live disk. Here's the config of the RAID controller in use: => ctrl all show detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: removed RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: Rev C Firmware Version: 5.12 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: False Drive Write Cache: Disabled SATA NCQ Supported: True And the partition table: Number Start End Size Type File system Flags 1 1049kB 274GB 274GB primary ext4 boot 2 274GB 300GB 25.8GB extended 5 274GB 300GB 25.8GB logical linux-swap(v1)

  Read the article

• How to use the AWUS036H on MacBook Pro with Lion and Backtrack in VM?

  - by Swader

  I have the AWUS036H USB WiFi adapter and have recently upgraded the OSX to Lion. The thing is, there are no drivers for Lion for the AWUS036H, and I would have to boot into 32bit mode every time I want to launch the adapter as per instructions here: http://www.youtube.com/watch?v=n9_HAGi1ce0 I also want to install BackTrack as I deal in networks a lot for my company. While this would be a simple matter on any other laptop, the company issued Macbook does not allow booting into any OS other than MacOSX or Windows with Bootcamp. Now, since dual booting into BT is not an option, I would like Backtrack to run in VM inside my MacOSX Lion - and this it does. It works like a charm inside VirtualBox. But since there are no 64bit drivers for the wifi adapter, Lion doesn't recognize it and cannot install it. This, in turn, means that Backtrack cannot see it even though AWUS036H usually works flawlessly with BT. How can I make my VM-based BT see the wifi adapter even if the parent OS doesn't see it, if at all? Is there a way, or am I better off buying a new WiFi adapter that supports OSX 10.7 such as the AWUS036NHR?

  Read the article

• Is there any special way to force GoBack to work with Windows Vista and 7?

  - by dfree

  Norton/Roxio's GoBack doesn't work with Vista/7 for reasons unknown. I have tried several alternatives (Norton Ghost, RollbackRX, Norton Save and Restore), none of which offer the same functionality as GoBack. Not only does GoBack not eat up all your hard drive space while creating a legitimate fail safe for any pc problems, it also allows you to see ACTIVELY EXACTLY WHAT PROCESS ARE BEING EXECUTED ON YOUR COMPUTER. This feature (called Advanced Disk Drive Restore) also allows you to troubleshoot problems and determine causes for things in about half a second by seeing what is happening on your machine. It's how I learned everything I know about computers. GoBack also features something called Safe Try Mode where you can put it in SafeTry and then mess up the whole computer and when you come out of it, your computer will be exactly how it was before. Amazing for people who like to tinker without risking their machine stability. It also helps for that accidentally erased paper or whatever you may have erased. I believe GoBack installs a type44 partition around the drive, which loads prior to windows to allow this functionality. If you're going to recommend another program, please don't (unless it does all of the above). I've tried all the competition and nothing is as good. I just want my GoBack to work with 7 :) Any ideas of crazy ways to make this work?

  Read the article

• SQL Server 2008 R2 - Cannot create database snapshot

  - by Chris Diver

  Server: Windows Server 2008 R2 X64 Enterprise SQL: SQL Server 2008 R2 Enterprise X64 I have a default SQL Server instance, the SQL Server service account is running as a domain user. I am trying to create a database snapshot in the directory where the mdf files are stored. The T-SQL syntax is correct. The file system is NTFS. The error message I get is: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 5119, Level 16, State 1, Line 1 Cannot make the file "e:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\TestDB.ss" a sparse file. Make sure the file system supports sparse files. The local SQLServerMSSQLUser$db$MSSQLSERVER group has Full Control permission on the folder where I am trying to create the snapshot. I can fix the problem in two ways, neither of which are suitable. Add the SQL Server service (domain) account to the local Administrators group and restart the SQL service. Grant the local SQLServerMSSQLUser$db$MSSQLSERVER group Full control on E:\ I have tried to change the owner of the DATA directory to SQLServerMSSQLUser$db$MSSQLSERVER to no avail. I have no issue creating a new database Why can I not create a snapshot by giving permission only on the DATA folder? Update 23/09/2010: I have tried mrdenny's suggestion with no luck (but learned something new in the process), I suspect the problem may be due to the fact that the domain is a windows 2000 domain running in mixed mode. I had to install hotfix KB976494 for Server 2008 R2, as the SQL Server 2008 R2 installer would not verify the service account correctly with the domain. I noticed that Server 2000 isn't a supported operating system for SQL 2008 R2 but cannot find anything that would suggest it shouldn't work in a 2000 domain. I dis-joined the test server from the domain and changed the service accounts to the local service account and I still have the same issue. I will try to re-install the server without joining the domain and without the hotfix and see if the issue persists.

  Read the article

• How to configure a Web.Config file to allow custom 404 handling while still displaying on-page 500 e

  - by Mark

  To customize 404 handling and based on the hosting company's suggestion, we are currently using the following web.config setup. However, we quickly realized that with this configuration, any page error (500 error) are also getting redirected to this custom error page. How can I modify this config file so we can continue to handle 404 with custom file while still able to view on-page error? <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.webServer> <httpErrors errorMode="DetailedLocalOnly" defaultPath="/Custom404.html" defaultResponseMode="ExecuteURL"> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="/Custom404.html" responseMode="ExecuteURL" /> </httpErrors> </system.webServer> <system.web> <customErrors mode="On"> <error statusCode="404" redirect="/Custom404.html" /> </customErrors> </system.web> </configuration>

  Read the article

• VMWare Guest Info - Wrong IP Returned

  - by Jon Bailey

  We're running a VDI environment with vSphere 4.0 and Oracle VDI 3.2.2 and are having a bit of a problem with users that connect to an IPSec VPN from within their VM. For some reason, once connected to the VPN, the VMWare API returns GuestInfo.ipAddress as the VPN IP rather than the primary IP of the only NIC on the system. The IP address shown in net[0].ipAddress is the correct address and is what vSphere client is reporting. Is there any way to get VMWare tools to report the net[0].ipAddress as GuestInfo.ipAddress? Below is sample output from the guestinfo.pl script. 172.16.1.2 is the example "bad" VPN address that our VDI software is seeing. VMXFLEX01 guestFamily: windowsGuest VMXFLEX01 guestFullName: Microsoft Windows XP Professional (32-bit) VMXFLEX01 guestId: winXPProGuest VMXFLEX01 guestState: running VMXFLEX01 hostName: VMXFLEX01 VMXFLEX01 ipAddress: 172.16.1.2 VMXFLEX01 toolsStatus: VMware Tools is running and the version is current. VMXFLEX01 toolsVersion: 8194 VMXFLEX01 Screen - Height: 600 VMXFLEX01 Screen - Width: 800 VMXFLEX01 Disk[0]: Capacity 42935926784 VMXFLEX01 Disk[0]: Path : C:\ VMXFLEX01 Disk[0]: freespace : 33272619008 VMXFLEX01 net[0] - connected : 1 VMXFLEX01 net[0] - deviceConfigId : 4000 VMXFLEX01 net[0] - macAddress : 00:50:56:95:1f:c9 VMXFLEX01 net[0] - network : VM Network VMXFLEX01 net[0] - ipAddress : 10.0.0.2

  Read the article

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >