Search Results

Search found 21441 results on 858 pages for 'internet man'.

Page 650/858 | < Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect....

  - by Goober

  Hello! I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Route all traffic via OpenVPN client

  - by Ilya

  I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Computer with OpenVPN client: 192.168.0.3 Computer that has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried the following, which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.100 Thanks!

  Read the article

• NIS client cannot find NIS server (Opensuse)

  - by Tony

  I installed NIS server on head node of a virtual cluster(VirtualBox). One of the node (let's say node-1) can find NIS server and work with it, but another node (node-2) just can't find the NIS server in Yast while it can ping and ssh to both head node and node-1. BTW, all the nodes are VMs, head node and node-1 are on the same physical machine, node-2 is on another physical machine. I set the domain name in /etc/hosts and /etc/yp.conf, and ypwhich sometimes gives the correct domainname several minutes later complains about "ypwhich: Can't communicate with ypbind", and will back to work after some time. Also tried rpcinfo -p hostname and it worked as expected. I almost tried every thing I can find on internet, but seems that not many people had this problem. Any help would be very appreciated.

  Read the article

• Where is the Flash in Chrome?

  - by Daniel

  I installed Google Chrome. This is the first thing I did after installing Ubuntu. I went into firefox, and went to chrome.google.com, and hit the button. I don't like package managers, and avoid the command line like the pox. Then, I started using Google Chrome. I went to Kongregate, and clicked on a game. It told me I didn't have flash. A few different websites told me the same. I assumed that they must have been wrong. I hit the link to Adobe, to install Flash, and it reassured me; of course, Google Chrome includes Flash. I checked my version - Chrome 5.0.375.126. Of course, I just downloaded it. I scoured the internet for solutions. None worked. Many seemed to involve re-enabling Flash, or something like that. But insofar as I can tell, there is no Flash anywhere in my Chrome. I feel like I bought a Reese's cup, and found solid chocolate. I checked in the Chrome plugin manager, and everything. A few solutions told me to copy some garbage into my command line and hit enter (as almost all solutions to problems on linux entail). I did it, reluctantly, and it did nothing. I thought Flash was supposed to come with Chrome. But it didn't. Sooooo... What gives? Google Chrome version: Google Chrome 5.0.375.126 (Official Build 53802) WebKit 533.4 V8 2.1.10.15 User Agent Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.126 Safari/533.4 Command Line /opt/google/chrome/google-chrome Operating System: Ubuntu 10.4 64 bit.

  Read the article

• Why would image thumbnails not be showing in all search engines in all browsers?

  - by Edward Tanguay

  For over a week now, when I search for a word at Google, it correctly gives me some preview image thumbnails: But when I click on "images", it doesn't show me any thumbnails: The same thing happens at Bing.com, when I search Bing itself it gives me some thumbnails on the general search result page: But when I click on "images", it doesn't show me any thumbnails: The same thing happens at Yahoo: If I click on one of the broken thumbnails, it shows me the picture fine: Thumbnails at youtube also work fine: It seems each search engine is hanging on different URLs as shown above: t1.gstatic.com ts3.mm.bing.net thm-a02.yimg.com so it doesn't seem to be the problem of one specific URL not sending thumbnails, it is just a problem with search engine image thumbnails in general. Also, this happens in every browser I try: Explorer, Firefox, Chrome. What could be the problem? Is it my computer, some setting somewhere, my router, my Internet provider (T-Online, Germany)? Has anyone ever had this problem and solved it?

  Read the article

• Re-post: Two JavaFX Community Rock Stars Join Oracle

  - by oracletechnet

  from Sharat Chander, Director - Java Technology Outreach: These past 24+ months have proved momentous for Oracle's stewardship of Java. A little over 2 years ago when Oracle completed its acquisition of Sun, a lot of community speculation arose regarding Oracle's Java commitment. Whether the fears and concerns were legitimate or not, the only way to emphatically demonstrate Oracle's seriousness with moving Java forward was through positive action. In 2010, Oracle committed to putting Java back on schedule whereby large gaps between release trains would be a thing of the past. And in 2011, that promise came true. With the 2011 summer release of JDK 7, the Java ecosystem now had a version brought up to date. And then in the fall of 2011, JavaFX 2.0 righted the JavaFX ship making rich internet applications a reality. Similar progress between Oracle and the Java community continues to blossom. New-found relationship investments between Oracle and Java User Groups are taking root. Greater participation and content execution by the Java community in JavaOne is steadily increasing. The road ahead is lit with bright lights and opportunities. And now there's more good news to share. As of April 2nd, two recognized JavaFX technology luminaries and "rock stars" speakers from the Java community are joining Oracle on a new journey. We're proud to have both Jim Weaver and Stephen Chin joining Oracle's Java Evangelist Team. You'll start to see them involved in many community facing activities where their JavaFX expertise and passion will shine. Stay tuned! Welcome @JavaFXpert and @SteveonJava!

  Read the article

• How can I use Windows Firewall to only permit the Windows Update service to make an outbound connection?

  - by microsmash

  I'm trying to tailor my Windows Firewall settings (using the Windows Firewall with Advanced Security console) to only permit programs that need to access the Internet with an outbound connection to do so. This works fine for normal applications as I can just allow the program, but services that load in the svchost.exe process are a problem. The only services I actually need to give access to are Windows Update and the Background Intelligent Transfer Service (and even that, I would only like Windows Update to be able to submit jobs to, but that's another issue.) Is there a method to only allow these to be permitted an outbound connection, and not any of the other services loaded in svchost?

  Read the article

• Convert a Row to a Column (or Backwards) in Google Docs Spreadsheets

  - by The Geek

  If you have to deal with a lot of spreadsheets, you’re probably really bored right now. You also might be wondering how to turn a row into a column, or a column into a row. Here’s how to do it with Google Docs Spreadsheets. If you’re an Excel user, you’re also in luck, because we’ve already shown you how to turn a row into a column, or vice-versa. It won’t make you any less bored though. Convert a Row to a Column (or backwards) The first thing you’ll need is a column or a row of information that you want to convert into the opposite. For our example, we’ve got this set of data that we created by using the Auto Fill options in Google Docs. Now in another cell, you’ll need to use the TRANSPOSE function, which you can use by simply typing in the following: =TRANSPOSE( And then selecting the cells with the mouse, or manually typing in the range of cells you want to copy. The final function in this example was: =TRANSPOSE(A1:A11) Finish it off with the final ) character to complete the function, hit the Enter key, and there we are… the column was transposed over to the right. You can use the same thing to turn columns into rows, or rows into columns—just change the range you are looking for. Similar Articles Productive Geek Tips How To Use AutoFill on a Google Docs Spreadsheet [Quick Tips]Integrate Google Docs with Outlook the Easy WayHow To Export Documents from Google Docs to Your ComputerConvert a Row to a Column in Excel the Easy WayScroll Backwards From the Ubuntu Server Command Line TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7)

  Read the article

• Sending single emails works, but sending to the same email in a distribution list is bounced

  - by EvilChookie

  I'm running an Exchange 2003 server on a Telstra Business internet connection (in Australia). I'm routing emails through the SMTP connecter, using the host smtp.telstrabusiness.com When users send single emails to a single recipient, the emails are sent correctly. However, when users send emails to a distribution list, they bounce back with: The message could not be delivered because the recipient's destination email system is unknown or invalid. Please check the address and try again, or contact your system administrator to verify connectivity to the email system of the recipient. One of the people in the list was able to recieve a single email from us just a few minutes afterwards, but did not recieve any of the email that should have come from the distribution list. Is there a way I can throttle the number of messages that Exchange will send at a time, so as not to appear as spam to Telstra?

  Read the article

• Ping / Trace Route

  - by dbasnett

  More and more I see programmers developing web based applications that are based on what I call "ping-then-do" mentality. An example would be the application that pings the mail server before sending the mail. In a rather heated debate in another forum I made this statement, "If you are going to write programs that use the internet, you should at least have a basic idea of the fundamentals. The desire to "ping-then-do" tells me that many who are, don’t." On this forum and at Stack Overflow I see numerous questions about ping / trace route and wonder why? If it is acceptable to have a discussion about it here I would like to hear what others think. If not I assume it will be closed rapidly.

  Read the article

• New PeopleSoft Applications Search

  - by Matthew Haavisto

  As you may have seen from the PeopleTools 8.52 Release Value Proposition , PeopleTools intends to introduce a new search capability in release 8.52. We believe this feature will not only improve the ability of users to find content, but will fundamentally change the way people navigate around the PeopleSoft ecosystem. PeopleSoft applications will be delivering this new search in coming releases and feature packs. PeopleSoft Application Search is actually a framework—a group of features that provides an improved means of searching for a variety of content across PeopleSoft applications. From a user experience perspective, the new search offers a powerful, keyword-based search presented in a familiar, intuitive user experience. Rather than browsing through long menu hierarchies to find a page, data item, or transaction, users can use PeopleSoft Application Search to directly navigate to desired locations. We envision this to be similar to how people navigate across the internet. This capability may reduce or even eliminate the need to navigate PeopleSoft applications using the existing application menu system (though menus will still be available to people that prefer that method). The new search will be available at any point in an application and can be configured to span multiple PeopleSoft applications. It enables users to initiate transactions or navigate to key information without using the PeopleSoft application menus. In addition, filters and facets will enable people to narrow their search results sets, making it easier to identify and navigate to desired application content. Action menus are embedded directly in the search results, allowing users to navigate straight to specific related transactions – pre-populated with the selected search results data. PeopleSoft Applications Search framework uses Oracle’s Secure Enterprise Search as its search engine. Most Customers will benefit from the new search when it is delivered with applications. However, customers can start deploying it after a Tools-only upgrade. In this case, however, customers would have to create their own indices and implement security.

  Read the article

• Huawei HG8245T Router - not connecting to another router

  - by BubbaK

  I just got a fiber optic connection installed at home and due to the build of the house, it's mostly cement/bricks, the wireless connection isn't received throughout the house. Previously, to combat this issue, I just ran a hardwire from the modem downstairs and upstairs and had it connected to a secondary (DLink) router. It did the job of getting me seamless wireless internet access everywhere. The issue is now with the new Huawei router, this setup isn't working. I have connected everything as previously, but it seems that the other (DLink) routers are not picking up the connection. I have tried everything and am totally lost as what to do to overcome this problem. Any help would be appreciated.

  Read the article

• Forward a port with modem (with built-in but disabled router) + a separate router

  - by Youn

  I have a Motorola SBG6580 that is a modem and a wireless router in one. However, the wireless router part was bad so I disabled it and got a separate wireless router. I can go into the configuration pages of both the modem and the router now, and I'm confused as to which device needs to be configured for port-forwarding. I have a raspberry pi that I want to set up as a webserver. Do I configure the router, the modem, or both? Right now, the SBG6580's 1st LAN is connected to the wireless router's WAN, and the internet is working well. Note that the SBG6580 only has 4 ports, and I'm assuming they're LAN,as they are not labeled.

  Read the article

• How to install a wiki server

  - by gvalero87

  I would like to install a wiki on my server so I can let people I know to edit documents. So, I don't wan it to be as open as wikipedia. I would like something as google docs (the thing is google docs doesn't handle images and tables on documents very well), doesn't have to be in real time as google does it. The first thing I noticed looking over internet there are different solutions. Maybe what I'm looking for is the easiest one to install. If a want to use the wiki technology don't have to much time investing on errors. Thanks for your opinions

  Read the article

• How to Clean Up and Fix Your Music Library with the MusicBrainz Database

  - by Erez Zukerman

  Over the years, some of us accumulate lots and lots of music files. Since these come from a variety of sources, they’re not always as neat as they could be. If your music library is in a bit of a jumble with tags missing, oddly named files and incomplete albums, read on to see how easy it is to make it neat once and for all. MusicBrainz is an online database that uses audio “fingerprints” to identify music tracks even when they’re incorrectly labelled. We’ll be using this database through a free client called Picard, available for Windows, Mac OS X and Linux. So first thing, head on over to Picard’s download page and get the installer. If you use Linux, you can install Picard using your package manager. Once you finish going through the installer, run Picard. Your firewall might pop up an alert telling you Picard is trying to access the Internet; you should agree to let Picard through. You will now see the main Picard interface. Click View > File browser (or press Ctrl+B). Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper] N64oid Brings N64 Emulation to Android Devices Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform]

  Read the article

• Routing only some local IPs through VPN on dd-wrt

  - by bo-inge-ostberg

  Much similar to this entry: http://serverfault.com/questions/94283/using-dd-wrt-to-connect-to-vpn-and-forward-all-traffic-of-certain-devices-through , I have set up my router with dd-wrt + OpenVPN to connect to a VPN. This works fine, and all traffic from behind the router goes through the VPN. How do I route(?) traffic in the router so that only certain IPs from the LAN will go through the VPN, while the others take the "normal" route? Is it also possible to allow traffic from certain local IPs to go ONLY through the VPN, making it impossible for them to use the regular internet connection if the VPN is down? I know this question was answered in the post I linked to, but that just doesn't seem to work for me. The routing table and rules change, but traffic still just goes through the VPN.

  Read the article

• Friday Fun: Wake Up the Box

  - by Mysticgeek

  Another Friday and it’s time to waste the rest of your Friday playing a  fun flash game online. Today we take a look at a relaxing physic based puzzle game called Wake Up the Box. Wake Up the Box This goal of this game is to wake up the box character by attaching parts of existing wood objects in each stage. You can start a new game or continue your progress from where you left off. At the beginning you get a tutorial showing what you need to do to wake the box. You get wood parts and can attach them to other wood pieces but not metal or brick. After successfully waking up Mr. Box, you can go to the next level or restart a level at any time if your having problems figuring out the puzzle. Each level gets more difficult and the puzzles are more challenging. Wake Up the Box is a relaxing and challenging game that will allow you to have fun, not working on TPS reports until the whistle blows. Play Wake Up the Box at FreeWebArcade Similar Articles Productive Geek Tips Stop the Mouse From Waking Up Your Computer from Sleep ModeFix "Sleep Mode Randomly Waking Up" Issue in Windows VistaStop Your Mouse from Waking Up Your Windows 7 ComputerPrevent Windows Asking for a Password on Wake Up from Sleep/StandbyUse Sleep.FM to Wake Up with the Web TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff

  Read the article

• How backward compatible are the HSDPA mobile networks

  - by Chris Kimpton

  Hi, I have got this Huawei wifi device, which has been unlocked for other networks. Works fine in UK on Vodafone (as well as 3). We are trying to get it to work with the Claro network in Jamaica. It connects and stays connected, but fails to get a 3g connection, just the slow EDGE one. Claro support say its because Claro currently does not support the 2100MHz frequency for 3G, which is what the device uses Does that sound correct? They say I need one that: Ensure however that these devices can use the 850MHz frequency. My understanding was that the device supports up to 2100, including their 850mhz... I am thinking that maybe the APN is incorrect, but I have set it to the only value I can find on the net, namely: internet.ideasclaro.com.jm Thanks in advance, Chris

  Read the article

• Run a batch file silently, executed at remote desktop login

  - by ILMV

  In our office we are using Linux thin client machines, they work very well except the lack of IE, which is a pain because the corporations we deal with are too stupid to update their web apps (no flame wars please). To solve this problem we have machine in our computer room which users remote desktop into to access internet explorer, this is achieved by running a batch script which opens IE and when it closes logs them off, this setup works well for us. Even though I have @echo off and the cmd window isn't displaying anything, I would really like that batch file to be executed silently, so the cmd window doesn't appear at all. Is this possible? The Ubuntu terminal server client has an option to launch a file / app at login, is there a command I can use to run this batch silently. I have tried these: C:\my_batch.bat /NOCONSOLE C:\my_batch.bat /NOWINDOW C:\my_batch.bat /B C:\my_batch.bat /Q ...with no success, perhaps it's the way I am doing it? Cheers :-) Edit The remote desktop platform is a Windows XP machine, nothing entirely special but not a Windows Server setup.

  Read the article

• Watson Ties Against Human Jeopardy Opponents

  - by ETC

  In January we showed you a video of Waton in a practice round against Jeopardy champions Ken Jennings and Brad Rutter. Last night they squared off in a real round of Jeopardy with Watson in a tie with Rutter. Watson held his own against the two champions leveraging the 90 IBM Power 750 servers, 2,880 processors, and the 16TB of memory driving him to his full advantage. It was impressive to watch the round unfold and to see where Watson shined and where he faltered. Check out the video below to footage of Watson in training and then in action on Jeopardy. Pay special attention to the things that trip him up. Watson answers cut and dry questions with absolute lighting speed but stumbles when it comes to nuances in language–like finis vs. terminus in the train question that Jennings answered correctly. Watch Part 2 of the video above here. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents Peaceful Tropical Cavern Wallpaper

  Read the article

• Windows 7: Open File - Security Warning box appears for every app on the desktop

  - by Michael Ratanapintha

  Whenever I double-click to open an executable on the desktop (.exe, .bat, etc.), or a shortcut on the desktop that points to an executable, the "Security Warning" pops up and asks me "Are you really sure you want to open that? Stuff from the Internet is dangerous!" I don't usually mind this warning and don't want to disable it globally, but now I'm getting it for any executable on the desktop, even ones that I didn't download from the Web and don't have the Mark of the Web alternate data stream. (That is, streams -d * shouldn't and doesn't help.) This started fairly recently, but I can't really point to anything I did that triggered it. It only occurs in one user account on the machine; the other account doesn't have this problem. Running System Restore didn't help. How can I fix the problem and make the pop-up warning appear only when it's supposed to?

  Read the article

• Keep your Root Authorities up to date

  - by John Breakwell

  Originally posted on: http://geekswithblogs.net/Plumbersmate/archive/2013/06/20/keep-your-root-authorities-up-to-date.aspxBy default, Windows will automatically update it’s internal list of trusted root authorities as long as the Update Root Certificates function is installed. This should be enabled by default and takes manual intervention to remove it. With this component enabled, the following happens: If you are presented with a certificate issued by an untrusted root authority, your computer will contact the Windows Update Web site to see if Microsoft has added the CA to its list of trusted authorities. If it has been added to the Microsoft list of trusted authorities, its certificate will automatically be added to your trusted certificate store. If the component is not installed and a certificate from an untrusted CA is encountered then the following text will be seen: This is an inconvenience for the person browsing the site as they need to click to continue. Applications, though, will be unable to proceed and will throw an exception. Example: ERROR_WINHTTP_SECURE_FAILURE 12175 (0x00002F8F) One or more errors were found in the Secure Sockets Layer (SSL) certificate sent by the server. If you look at the certificate’s properties, you can see the “Issued by:” value:   This must match a Trusted Root Certificate Authority in the current user’s certificate store.   So turn on automatic updating of trusted root authority certificates. For Windows Vista and above, this option is controlled through Group Policy. See the “To Turn Off the Update Root Certificates Feature by Using Group Policy” section of the following Technet article: Certificate Support and Resulting Internet Communication in Windows Vista If Windows Update is a blocked site then download and deploy the latest pack of root certificates from Microsoft: Update for Root Certificates For Windows XP [May 2013] (KB931125)   Failing that, find a machine that has the latest root certificates installed and export them from there: Open up the Certificates console. Right-click the required Trusted Root Certificate Authority certificate Choose Export from “All Tasks” to open up the Certificate Export Wizard Choose an export file format – DER should be fine Provide a file name and complete the export. Move the file to the machine that’s missing the certificate Right-click the file and choose “Install Certificate” to open up the Certificate Import Wizard Allow the wizard to automatically select the certificate store and complete the import On a side note, for troubleshooting certificate issues it can be helpful to clear the SSL state:

  Read the article

• How to share a USB modem?

  - by allenskd

  Usually I wouldn't have this problem if it was a dsl modem or cable modem but it's really been difficult for me to share this little modem to other computers. Right now I have my laptop connected to a hub, both computers are in the same workgroup and I have "share this computer internet to other computers"... etc. Problem is, I don't know what is currently happening... I'm hoping someone would guide me, I have googled and some people have been successful at sharing the connection but it seems I'm missing something =/ Let me know if you need any details, thanks

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help

  Read the article

• Songs/Movies are not being played

  - by romilnagrani

  Hi the problem i am facing is very odd. None of my songs (.mp3/.avi etc) are not able to run in any of the media players: Windows media player, Windows media center, VLC, DIV etc. What i have done before posting the question here. a. Check Device and Drivers and they are working OK and Updated even. b. Run Sample Audio (Downloaded from Internet) in Adobe Sound-booth and it worked. c. Plus i run a video in YouTube and i was able to hear it! d. I am able to hear windows Error Beeps too..!!! e. While running Movies i could see playing but not hear it What could be the problem? please help thanks...

  Read the article

< Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >