Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 653/792 | < Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >

• Reinstall Acer OEM Windows 8, Windows 8 Recovery for Acer Aspire V5 122p

  - by stwindr

  My Acer Aspire V5-122P-61456G50NSS, model - MS2377, has crashed all together. It came preloaded with Windows 8 and I upgraded to windows 8.1 3-4 days before crash. Unfortunately I did not make any recovery media before the crash. While accessing the eRecovery on Acer store with my PC's serial no. it says nor RCD available for this. I tried recovery by loading recovery manager (Left Alt + F10) Various other advanced startup options (like holding shift key while turning on or pressing F8 key) returns nothing but no luck. However I am able to enter BIOS. After doing research on above condition on various PC forums, now my questions: I read that a 'Windows Recovery Drive' can be made on any PC running Windows 8 and could be used to repair another PC. Does anybody in SuperUser community have that (or a link to download the same from somewhere? as I'm unable to find anybody running windows 8 among my friends). I downloaded a window 8 Pro ISO and made a bootable USB. I was able to go to 'Repair Your Computer' option and after going to 'Reset your PC' option found that my recovery partition has gone/missing. I tried all options available but no luck. Then I tried to install with that Windows 8 Pro ISO but got message: "The product key entered does not match any of the Windows images available for installation. Enter a different product key". before this message I did not got any form to fill product key! Does this mean that the installer was picking up the key from BIOS (OEM Key)? and may be the installation did not succeeded because OEM Windows version was Window 8 and I was trying to install Windows 8 Pro. If that is the case then, could somebody please send me link to download an Windows 8 ISO? I am helpless and couldn't find anywhere on internet (without having to pay for a new key, but I should not pay as the installer will use OEM key).

  Read the article

• virtualbox installing iso Error "could not find a valid v7 on sda"

  - by MountainX

  I decided to try this suggestion to install Android x86 on Virtual Box. I'm following those steps and I'm at #4. I used the android-x86-4.0-RC1-amd_brazos.iso (because I have a ThinkPad that this might be compatible with and it seemed as good as any of the other choices...) I'm getting an endless series of errors: .[numbers] VFS: could not find a valid v7 on sda. .[numbers] VFS: could not find a valid v7 on sda. repeating... For storage, I made a VDI image sized at 4.0 GB (dynamically allocated) attached on SATA Port 0. Background and more details: I'm running Kubuntu 12.04. I installed VirtualBox 4.1.12 after adding deb http://download.virtualbox.org/virtualbox/debian precise contrib to my sources. EDIT: Now I'm wondering if I installed the right package. I verified that I'm running 4.1.12. But I installed it with apt-get install virtualbox instead of the recommended apt-get install virtualbox-4.1. I checked just now and see this: apt-cache search virtualbox virtualbox - x86 virtualization solution - base binaries virtualbox-4.1 - Oracle VM VirtualBox But when I run VirtualBox, I get the Oracle VM VirtualBox Manager version 4.1.12, so I think I'm OK. I did see one minor issue (possibly related to this question) when installing VB, but in my case I don't think it is actually an error at all: * No suitable module for running kernel found [fail] invoke-rc.d: initscript virtualbox, action "restart" failed. VirtualBox installed and seems to be running fine. I just can't get the ISO image to install. The error is as shown above.

  Read the article

• Problems with cross forest authentication in SQL Reporting

  - by chunkyb2002

  We're currently running an SQL 2008 R2 Cluster with Reporting Services running, all for use with System Center Operations Manager 2007 R2 (RU3). Our users are on a different domains to the SCOM and SQL servers (we have two domains as we are in the process of a domain migration) We have no problems at all with users accessing reports via the SCOM Console or the Web interface if they are on the new domain which runs at 2008 R2 functional level. However users on the old domain (which runs at a 2003 functional level) cannot access reports on SCOM or via the web interface (http://sqlserver/reports) The error we get is: An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError) For more information about this error navigate to the report server on the local server machine, or enable remote errors Taking the errors advise we logged on to the SQL server as a user on the old domain (which works fine!) and then try to authenticate with the reporting via the web interface which produces this most useful of errors: An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError) The creator of this fault did not specify a Reason. Things we've tried: Recreating the trust between domains Ensuring the SQL Reporting service account was a member of Windows Authorization Access Group on the 2003 domain Added users on the 2003 domain explicitly to the Reporting Users group on the SQL Server Has anyone come across this issue before perhaps in a different scenario? If so how was it resolved? Thanks in advance for any help.

  Read the article

• What does "single-bit ECC errors were detected on the RAID controller" mean?

  - by jsp

  I have a Dell T7600 with a Perc H710P RAID controller and 4 attached 3TB drives. Over the past few months the RAID controller has been intermittently reporting errors on boot: "no boot device found", "adapter at baseport is not responding", disks frequently reported as missing or failed. I have since replaced the RAID controller, the 4 hard drives, and finally the system's motherboard. After replacing the motherboard and rebooting a few times, I got the error Single bit ECC errors were detected on the RAID controller. Please contact technical support to resolve this issue. After rebooting about 20 more times, I haven't seen the ECC error. The system seems otherwise OK, except for the fact that the disk fans will sometimes start blowing at full blast when the the system is sitting completely idle and not stop until I reboot. Are the ECC errors in memory on the RAID controller? Or, does the RAID controller map in system memory, and the ECC errors are really in system memory? Or, are the ECC errors in the 1GB cache that resides in the RAID controller?

  Read the article

• Why is firefox 4 not HW accelerated?

  - by acidzombie24

  At first i thought it was my computer but then i tried chrome. Why isnt firefox not hardware accelerated? The first screenshot shows chrome at 23% usage. The 2nd shows 59%. I have 2 cpus which is why it isnt 100% usage. The game pictured is biolab Heres the text for about:support Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Open Containing Folder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value accessibility.typeaheadfind.flashBar 0 browser.places.importBookmarksHTML false browser.places.smartBookmarksVersion 2 browser.startup.homepage_override.buildID 20110303194838 browser.startup.homepage_override.mstone rv:2.0 extensions.lastAppVersion 4.0 gfx.font_rendering.directwrite.enabled true network.cookie.prefsMigrated true places.history.expiration.transient_current_max_pages 127602 privacy.sanitize.migrateFx3Prefs true Graphics Adapter Description Mobile Intel(R) 4 Series Express Chipset Family Vendor ID 8086 Device ID 2a42 Adapter RAM Unknown Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32 Driver Version 8.15.10.2202 Driver Date 8-25-2010 Direct2D Enabled true DirectWrite Enabled true (6.1.7600.16385, font cache n/a) WebGL Renderer Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.541) GPU Accelerated Windows 1/1 Direct3D 10

  Read the article

• TSM Backup Fails with VSS

  - by user176320

  Since we rebuilt our servers to windows servers 2008 x64 r2 we have perpetual problems with scheduled backup (shadow copy). In the Application event log, the following events are logged on both nodes: The description for Event ID 4112 from source TsmVssPlugin cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: VSS processing encountered error 'VSS_E_UNEXPECTED_PROVIDER_ERROR' in the Volume Shadow Copy API 'AddToSnapshotSet'. For more information, see the IBM Tivoli Storage Manager client error log. Re installing TSM didn't change anything and still logging same events. TSM Error log file shows following: ANS1327W The snapshot operation for 'C:' failed with error code: -1. ANS5250E An unexpected error was encountered. TSM function name : BaStartSnapshot TSM function : initializeSnapshotSet() failed, check Microsoft Application event log for VSS errors TSM return code : -1

  Read the article

• Cannot reactivate RAID-5 volume: The size of the plex member is invalid

  - by Ian Boyd

  We had a 3-drive Windows Server 2008 R2 RAID-5 fail (operating in redundancy mode): WDC 1 TB WDC 1 TB WDC 1 TB We removed the failed hard drive, and put a WDC 1 TB drive (that we had standing by) into the machine. When launched, Disk Manager, asked permission to "initialize" the disk as either: Master Boot Record (MBR) Guid Partition Table (GPT) We initialized the disk as GPT, converted it to dynamic, and tried to use the Repair Volume command - except it was greyed out. (which is a terrifying thing on a failed production server hosting 3 virtual servers) i tried from the diskpart command line tool. First we look for our RAID-5 volume that is in Failed Rd mode: DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 E VMs (Raid5) NTFS RAID-5 1863 GB Failed Rd Volume 1 D DVD-ROM 0 B No Media Volume 2 System Rese NTFS Partition 100 MB Healthy System Volume 3 C NTFS Partition 1862 GB Healthy Boot There, Volume 0. Make that our active context: DISKPART> select volume 0 Volume 0 is the selected volume. Now we need to find the disk we will be repairing the volume with: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 931 GB 0 B * Disk 1 Online 931 GB 931 GB * Disk 2 Online 1863 GB 0 B Disk 3 Online 931 GB 0 B * Disk M0 Missing 0 B 0 B * The disk with 931 GB free, Disk 1. Now we just need to repair the volume: DISKPART> repair disk=1 Virtual Disk Service error: The size of the plex member is invalid.

  Read the article

• Oracle VM repository creation seems contradictory to its server pool?

  - by Michael

  I found something contradictory in Oracle VM. Clustered server pool creation in Oracle VM would format my FC LUN as ocfs2 , and start o2cb & ocfs2 services to build cluster environment. After that, when I wanted to create repository on the serverpool, unexpectedly, it told me that the physical disk I chose which is also my FC LUN, already contains a file system. What a contradictory! So what, delete the file system in serverpool? If so, why created it before?! OVM> list physicaldisk Command: list physicaldisk Status: Success Time: 2012-09-10 06:44:42.660 Data: id:0004fb00001800007765e62381895f61 name:OVM_HDS OVM> create serverpool clusterenable=true virtualip=10.84.21.123 physicaldisk=OVM_HDS name=ovmserverpool Serverpool creation took quite a long time since my FC LUN was big. When the creation completed, my FC LUN was created as ocfs2 and o2cb & ocfs2 services were started on my ovm servers successfully. But then repository creation indeed throws me a big surprise ... OVM> create repository serverpool=ovmserverpool physicaldisk=OVM_HDS name=ovmrepo Command: create repository serverpool=ovmserverpool physicaldisk=OVM_HDS name=ovmrepo Status: Failure Time: 2012-09-10 06:23:44.656 Error Msg: com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_002026E Cannot use or delete physical disk: OVM_HDS, it already contains a file system: [Pool filesystem for ovmserverpool] Mon Sep 10 06:23:44 CST 2012 What should I do now? Delete the filesystem using dd command? That would destroy the serverpool, right? I'm really confused. My OVM Manager version is 3.1.1.399 which is the latest. Any tips are appreciated. Thanks.

  Read the article

• Dell VRTX - slow cluster shared storage

  - by NorbyTheGeek

  I have a brand new Dell VRTX box set up as a Failover Cluster running HA Hyper-V virtual machines. This is my first time setting up clustering, and my first time with one of these boxes, so I'm sure I've missed something. The virtual machines are experiencing high disk latency and bad performance when accessing their VHD(x) files located on a Cluster Shared Volume. The VRTX has 10 x 900 GB 10K SAS drives in RAID 6 configuration, and the VRTX has the redundant Shared PERC 8 controllers. Both blades have full access to the virtual disks. There are two M520 blades installed, each with 128 GB RAM. MPIO is configured for the PERC 8 controllers. Operating system on the blades is Server 2012 (NOT R2). The RAID 6 array is split into a small (8 GB) volume for cluster quorum witness and a large (6.5 TB) volume for a Cluster Shared Volume (mounted on the nodes as C:\ClusterStorage\Volume1) An example of slow disk access: logging into a Server 2012 VM and having Server Manager come up automatically. Disk access goes to 100%, with write speeds at 20 MB or so, read speeds of 500 KB or so, and Average Response Time of over 1000 ms, sometimes spiking at 4000-5000 ms or so. It's the latency that really worries me. Is there something specific I should look at in my configuration? It doesn't seem to matter whether I use VHD or VHDX, dynamic or static.

  Read the article

• SCOM, Server 2008 and SQL Server 2008

  - by Jacques

  Hi there, I'm trying to setup SCOM(System Center Operations Manager 2007 (SCOM) – Platform Monitoring) on my Server 2008 machine using SQL Server 2008 running on the same machine. When I check my prerequisites I get problem on SQL and Active Directory components. (I'm running SQL server 2008 and Server 2008 with active directory not installed) Errors: 1.Microsoft SQL Server 2005 Service Pack 1 required. Details: SQL Server 2005 SP1 is the next version of SQL Server. SQL Server 2005 Enterprise Edition, is a complete data and analysis platform for large mission-critical business applications. The link provided in the resolution column is a trial version of the product and is not supported by the Microsoft SQL Server team In order to install active directory needs to be present. Details:Setup failed to verify the presence of Active Directory for this server. I've got a couple of questions I need answering, hope someone can help. Do I need to install Active Directory for SCOM to work? Can I run SCOM with an SQL 2008 Database? How do I get pass these problems?

  Read the article

• Pain removing a perl rootkit

  - by paul.ago

  So, we host a geoservice webserver thing at the office. Someone apparently broke into this box (probably via ftp or ssh), and put some kind of irc-managed rootkit thing. Now I'm trying to clean the whole thing up, I found the process pid who tries to connect via irc, but i can't figure out who's the invoking process (already looked with ps, pstree, lsof) The process is a perl script owned by www user, but ps aux |grep displays a fake file path on the last column. Is there another way to trace that pid and catch the invoker? Forgot to mention: the kernel is 2.6.23, which is exploitable to become root, but I can't touch this machine too much, so I can't upgrade the kernel EDIT: lsof might help: lsof -p 9481 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMEss perl 9481 www cwd DIR 8,2 608 2 /ss perl 9481 www rtd DIR 8,2 608 2 /ss perl 9481 www txt REG 8,2 1168928 38385 /usr/bin/perl5.8.8ss perl 9481 www mem REG 8,2 135348 23286 /lib64/ld-2.5.soss perl 9481 www mem REG 8,2 103711 23295 /lib64/libnsl-2.5.soss perl 9481 www mem REG 8,2 19112 23292 /lib64/libdl-2.5.soss perl 9481 www mem REG 8,2 586243 23293 /lib64/libm-2.5.soss perl 9481 www mem REG 8,2 27041 23291 /lib64/libcrypt-2.5.soss perl 9481 www mem REG 8,2 14262 23307 /lib64/libutil-2.5.soss perl 9481 www mem REG 8,2 128642 23303 /lib64/libpthread-2.5.soss perl 9481 www mem REG 8,2 1602809 23289 /lib64/libc-2.5.soss perl 9481 www mem REG 8,2 19256 38662 /usr/lib64/perl5/5.8.8/x86_64-linux-threa d-multi/auto/IO/IO.soss perl 9481 www mem REG 8,2 21328 38877 /usr/lib64/perl5/5.8.8/x86_64-linux-threa d-multi/auto/Socket/Socket.soss perl 9481 www mem REG 8,2 52512 23298 /lib64/libnss_files-2.5.soss perl 9481 www 0r FIFO 0,5 1068892 pipess perl 9481 www 1w FIFO 0,5 1071920 pipess perl 9481 www 2w FIFO 0,5 1068894 pipess perl 9481 www 3u IPv4 130646198 TCP 192.168.90.7:60321-www.**.net:ircd (SYN_SENT)

  Read the article

• How to install Konica Minolta PagePro 1300W to Windows 7 64-bit?

  - by jsalonen

  I recently switched to Windows 7 (Home Pro, 64-bit) to discover that my Konica Minolta PagePro 1300W printer no longer works. When connected, Win7 prompts that it can not install a driver for the device. I have done a lot of googling to solve this problem, with no luck so far. From Konica Minolta official website, I can find drivers only for Windows XP/2000. My current reasoning is that they currently don't and most likely are not going to support Win7 let alone 64-bit version of it for this rather old printer. So my question is: does anyone have any good tips on how to make this printer work on my system? Is there any other place I could look for drivers, or in generally, do you know any workarounds that could let me printer work? One of the workaround I have been considering is to install a Windows XP / Ubuntu Linux on a virtualbox and use that system when I really really need to printer. This is of course not the optimal solution, but would let me possibly to use the printer until I buy a newer model.

  Read the article

• Are VMWare ESXi 5 patches cumulative?

  - by ewwhite

  It seems basic, but there's confusion about the patching strategy needed to manually update standalone VMWare ESXi hosts. The VMWare vSphere blog attempts to explain this, but it's still not clear. From the blog: Say Patch01 includes updates for the following VIBs: "esxi-base", "driver10" and "driver 44". And then later Patch02 comes out with updates to "esxi-base", "driver20" and "driver 44". P2 is cumulative in that the "esxi-base" and "driver44" VIBs will include the updates in Patch01. However, it's important to note that Patch02 not include the "driver 10" VIB as that module was not updated. Many of my ESXi installations are standalone and do not make use of Update Manager. It is possible to update an individual host using the patches make available through the VMWare patch download portal. The process is quite simple, and that part makes sense. The bigger issue is determining what to actually download and install. In my case, I have a good number of HP-specific ESXi builds that incorporate sensors and management for HP ProLiant hardware. Let's say that those servers start at ESXi build #474610 from 9/2011. Looking at the patch portal screenshot below, there is a patch for ESXi update01, build #623860. There are also patches for builds #653509 and #702118. Coming from the old version of ESXi, what is the proper approach to bring the system fully up-to-date? Which patches are cumulative and which need to be applied sequentially? Perhaps the download size is the confusing factor, but is installing the newest build the right approach, or do I need to step back and patch incrementally?

  Read the article

• What is my miniport's service name?

  - by Ian Boyd

  i am trying to query the physical sector size of my drive using fsutil: C:\Windows\system32>fsutil fsinfo ntfsinfo c: NTFS Volume Serial Number : 0x78cc11b2cc116c1e Version : 3.1 Number Sectors : 0x000000003a382fff Total Clusters : 0x00000000074705ff Free Clusters : 0x00000000022fc29b Total Reserved : 0x00000000000007d0 Bytes Per Sector : 512 Bytes Per Physical Sector : <Not Supported> Bytes Per Cluster : 4096 Bytes Per FileRecord Segment : 1024 Clusters Per FileRecord Segment : 0 Mft Valid Data Length : 0x00000000305c0000 Mft Start Lcn : 0x00000000000c0000 Mft2 Start Lcn : 0x0000000003a382ff Mft Zone Start : 0x0000000006951940 Mft Zone End : 0x0000000006951c80 RM Identifier: 19B22CBE-570D-19DE-9C72-CD758F800DDC You can see that the Bytes Per Physical Sector value is Not Supported: Bytes Per Physical Sector : <Not Supported> In KB Article Microsoft support policy for 4K sector hard drives in Windows, Microsoft says: If fsutil.exe continues to display "Bytes Per Physical Sector : " after you apply the latest storage driver and the required hotfixes, make sure that the following registry path exists: HKLM\CurrentControlSet\Services\<miniport’s service name>\Parameters\Device\ Name: EnableQueryAccessAlignment Type: REG_DWORD Value: 1: Enable The only thing i don't know is what my Miniport's service name is. What is my miniport's service name. i know that my SATA drives are in AHCI mode, and AHCI uses the msahci driver service: Is that my miniport service? "MSAHCI"? See also Hitachi - Advanced Format Technology Brief RMPrepUSB - Advanced Format (4K sector) hard disks Microsoft support policy for 4K sector hard drives in Windows OSR Online - Advance Disk Format support in Storport Virtual Mniport diver Default cluster size for NTFS, FAT, and exFAT Wikipedia - Advanced Format

  Read the article

• Yum update not working on CentOS 6.2 minimal install

  - by Owen

  Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

  Read the article

• procdump on w3wp.exe: Only part of a ReadProcessMemory or WriteProcessMemory request was completed

  - by JakeS

  I'm having a problem with an IIS application that occasionally spikes up in CPU usage, and am trying to use procdump to get a memory dump for examination. I'm running "procdump.exe -64 -mA 9999" where 9999 is the pid of the process. But every time I do it, I get an error: Only part of a ReadProcessMemory or WriteProcessMemory request was completed. Doing this also recycles the apppool, relieving the CPU spike, so I can't keep trying until I get it right. Does anyone know what is going wrong? EDIT WITH MORE INFO: So far I've failed to generate a debug dump no matter what tool I try. All of them seem to generate the same sort of error. This is 2008 R2 Datacenter running IIS7 with a 64-bit asp.net web site. My best guess is that something is getting blocked, causing some requests to remain open in IIS and gradually using up resources. If I monitor the worker process using the IIS Manager and view all requests, throughout the day I'll start to see some requests that "stick" and run forever. Some of these are for static files. Some are for aspx pages. I cannot see any "common" reason for them. Every once in a while the app pool starts taking up 100% CPU and the only remedy is to kill it.

  Read the article

• Configuring VirtualBox host only networking: OSX host, Ubuntu guest

  - by Greg K

  I have a Ubuntu guest configured with two interfaces, eth0 is using NAT and works fine, I can access the net. The second interface eth1 is set to host only networking and VirtualBox has created a vboxnet0 virtual adapter on the host. I've configured vboxnet0 in VirtualBox adapter settings with the following: ip 192.168.21.20 subnet 255.255.255.0 Once the VM guest is running, ifconfig on OSX has vboxnet0 setup as: vboxnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 0a:00:27:00:00:00 inet 192.168.21.20 netmask 0xffffff00 broadcast 192.168.21.255 In the guest, eth0 is set to use DHCP, I've statically assigned eth1 to 192.168.21.20 (is this a mistake?): auto eth1 iface eth1 inet static address 192.168.21.20 netmask 255.255.255.0 network 192.168.21.0 broadcast 192.168.21.255 gateway 192.168.21.1 There is no device on 192.168.21.1 - what should I set my gateway to? In the guest the routes look like so: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.21.0 * 255.255.255.0 U 0 0 0 eth1 10.0.2.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 default 192.168.21.1 0.0.0.0 UG 100 0 0 eth1 Route table on OSX: $ netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.77.36.1 UGSc 28 0 en1 10.77.36/22 link#5 UCS 5 0 en1 10.77.39.38 127.0.0.1 UHS 1 2236 lo0 10.77.39.255 link#5 UHLWbI 1 66 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 8642 lo0 169.254 link#5 UCS 0 0 en1 192.168.21 link#7 UC 2 0 vboxnet 192.168.21.20 a:0:27:0:0:0 UHLWI 0 4 lo0 192.168.21.255 link#7 UHLWbI 2 64 vboxnet I can't SSH from the host to the guest (I used to be able to when the VM was configured with a bridged connection): $ ssh 192.168.21.20 ssh: connect to host 192.168.21.20 port 22: Connection refused What have I done wrong here? TIA

  Read the article

• WmiPrvSE memory leak on Windows 2008 *R2*

  - by MichaelGG

  I've seen references on Windows 2008 to WmiPrvSE leaks, but nothing about Windows 2008 R2. We're running R2 on top of Hyper-V (2008). We are also running NSClient++ for monitoring from opsview. Over time, WmiPrvSE.exe starts to use a lot of memory, causing memory alert issues (less than 10% free). VM has 2GB, WmiPrvSE consumes up to 500-600MB before I kill it. Killing the process doesn't seem to have any negative effect; it starts up again and I haven't noticed any problems. But after a day or two, it's back in the same situation. Any ideas on what to do? Resource Monitor doesn't show any Disk or Network IO by WmiPrvSE.exe. Just slowly climbing private memory... Edited to add: We aren't running clustering, or Windows System Resource Manager. The only regular WMI user I can guess is NSClient++, but we don't seem to have this problem on other servers.

  Read the article

• How do you import CA certificates onto an Android phone?

  - by f50driver

  Hi all, I want to connect to my University's wireless using my Nexus One. When I go to "Add Wi-Fi network" in Wireless Settings I fill in the Network SSID and select 802.1x Enterprise for the security and fill everything out. The problem is that our university's wireless uses Thawte Premium Server CA certificate for certification. When I click the drop down list for CA certificate I get nothing in the list (just N/A) Now I have the certificate (Thawte Premium Server CA.pem) and have moved it to my SD card, but it doesn't look like Android automatically detects it. Where should I put the certificate so that the Android wireless manager recognizes it. In other words, how can I import a CA certificate so that Android recognizes that it is on the phone and displays it in the CA Certificate drop down list. Thanks for any help, Tomek P.S. My phone is not rooted EDIT: After doing some research it looks like you are able to install certificates by going to your phone's settings Location & Security Install from SD card Unfortunately it looks like the only accepted file extension is .p12. It does not look like there is a way to import .cer or .pem files (which are the only two files that come with the Thawte certificates) at this moment. It does look like you can use a converter to convert your .cer or .pem files to .p12, however a key file is needed. https://www.sslshopper.com/ssl-converter.html I do not know where to get this key file for the Thawte certificates.

  Read the article

• System Expandable-String Environment Variables Can’t Reference User Environment Variables

  - by Synetech inc.

  Hi, I’ve run into a bit of a situation with Windows environment variables. I’ve narrowed it down to what may or may not makes sense and/or possibly be by design. It seems that expandable-string environment variables of the local machine cannot reference environment variables of the current user. For example if you’ve got the following environment variables: [HKCU\Environment] "CU"="CU" "CU->LM"="%LM%" [HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment] "LM"="LM" "LM->CU"="%CU%" Then you get the following results: > set CU CU=CU CU->LM=LM > set LM LM=LM LM->CU=%CU% It seems that user variables can expand system variable references, but system variables cannot expand (access?) user variable references. I suppose that it makes sense if you think about it just right (eg like how user vars override/hide system vars of the same name), but it also doesn’t make sense if you think about it in even more ways. So what’s going on? Is there a way to get this to work as expected? Thanks.

  Read the article

• Windows Server Backup - Recover only shows the latest backup

  - by Steffen

  We're having quite some trouble at work using Windows Server Backup. We have a HyperV server (Win 2008) running 8 virtual web servers, these are running a variety of OS'es: Win 2003, Win 2008 and a lone Debian. Each virtual server has a separate partition on the physical HyperV server, so e.g. E: is virtual server #1, F: is #2 and so forth. For backup we use Windows Server Backup, or more exactly we use the commandline tool: wbadmin.exe We need to make the backups without stopping the virtual servers, as we cannot afford the downtime (we've got users online both day and night), and Windows Server Backup offers to use the shadow copy provider to archive this. We run wbadmin like this: wbadmin start backup -backuptarget:\\remotebackuplocation\somefolder -include:E: -quiet We run it once per partition, because we've got a script wrapped around that command, for sending us an email about how it went. Each time we run wbadmin it'll delete the Backup xxxx folder it created in last backup, and just create a new. In order to prevent this from happening, we rename the backup xxx folder after each backup is run, before starting the next one. I realize we must rename it back to its original name prior to recovering, and we obviously do this. Now the issue is as follows: Even though we have all the backed up files, and rename whichever backup we want to use, to its original name, we can only see the latest backup in the Windows Server Backup GUI when we select "Recover". This means we can only recover the last partition we backup up, so e.g. E: can never be recovered. In other words we're screwed :-( My question is: Does anyone know how to use Windows Server Backup for a scenario like this ? Or is it simply not possible due to the simplicity of Windows Server Backup ? If it's not possible, could you recommend some backup software for this purpose ? We've already looked at MS' System Center Data Protection Manager, however it's quite expensive and the boss doesn't like that :-/

  Read the article

• UNC Path fails by IP "no network provider accepted the given network path", but works using hostname

  - by BoyMars

  I have an unusual problem with a Windows Server 2003 (Standard x86) box. It appears the machine will not accept connections to its shares (locally and from other domain member servers) by using its ip address in a UNC path. The error returned is: "no network provider accepted the given network path" This is the case with the machine's ip address: \\10.0.8.x and even the loopback address: \\127.0.0.1 \\localhost does not work... but using the hostname (fqdn or not) works: \\server & \\server.domain.local The local windows firewall for this server is off, ping/rdp/other services respond fine using the IP address. The following services are running and have been restarted: Computer Browser Workstation Server The server itself has been rebooted too. Event 8032 in the system log indicates that: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{29A6A925-AFB3-47E2-BA59-DDA086DEAE7A}. The backup browser is stopping. The domain controller has not been restarted, no other servers have experienced this problem, yet there are a number of browser (8021) related errors in the logs on this server. Does anyone have any suggestions? I would like to avoid rejoining this server to the domain if possible.

  Read the article

• Connecting to ItsHidden in Ubuntu 9.10 problems

  - by Ionel Bratianu

  I try to setup a VPN connection to ItsHidden on Ubuntu 9.10. I double-checked my credentials in the VPN configuration, but I don't think that this is problem. In my syslog I got these messages: Jan 11 14:38:46 NetworkManager: Starting VPN service 'org.freedesktop.NetworkManager.pptp'... Jan 11 14:38:46 NetworkManager: VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 4502 Jan 11 14:38:46 NetworkManager: VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections Jan 11 14:38:46 NetworkManager: VPN plugin state changed: 1 Jan 11 14:38:46 NetworkManager: VPN plugin state changed: 3 Jan 11 14:38:46 pppd[4506]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. Jan 11 14:38:46 NetworkManager: VPN connection 'ItsHidden' (Connect) reply received. Jan 11 14:38:46 pppd[4506]: pppd 2.4.5 started by root, uid 0 Jan 11 14:38:46 pppd[4506]: Using interface ppp0 Jan 11 14:38:46 NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Jan 11 14:38:46 NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Jan 11 14:38:46 pppd[4506]: Connect: ppp0 /dev/pts/1 Jan 11 14:39:06 pptp[4508]: nm-pptp-service-4502 fatal[get_ip_address:pptp.c:430]: gethostbyname 'vpn.itshidden.com': HOST NOT FOUND Jan 11 14:39:06 pppd[4506]: Modem hangup Jan 11 14:39:06 pppd[4506]: Connection terminated. Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Jan 11 14:39:06 pppd[4506]: Exit. Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: VPN plugin state changed: 6 Jan 11 14:39:06 NetworkManager: VPN plugin state change reason: 0 Jan 11 14:39:06 NetworkManager: connection_state_changed(): Could not process the request because no VPN connection was active. Jan 11 14:39:06 NetworkManager: Policy set 'Auto eth0' (eth0) as default for routing and DNS. Jan 11 14:39:19 NetworkManager: [1263213559.003098] ensure_killed(): waiting for vpn service pid 4502 to exit Jan 11 14:39:19 NetworkManager: [1263213559.003289] ensure_killed(): vpn service pid 4502 cleaned up Because the gethostbyname is failing, I suppose that the NetworkManager doesn't know that I use proxies for accessing Internet. I'm not sure that this is the real problem. Could you tell me a solution to make gesthostbyname not failing anymore?

  Read the article

• Why does my PowerShell script hang when called in PSEXEC via a batch (.cmd) file?

  - by Kev

  I'm trying to remotely execute a PowerShell script using PSEXEC. The PowerShell script is called via a .cmd batch file. The reason we do this is to change the execution policy, run the powershell script then reset the execution policy again: On the remote server do-tasks.cmd looks like: powershell -command "&{ set-executionpolicy unrestricted}" powershell DoTasks.ps1 powershell -command "&{ set-executionpolicy restricted}" The PowerShell script DoTasks.ps1 just does this for now: Write-Output "Hello World!" Both of these scripts live in c:\windows\system32 (for now) just so they're on the PATH. On the originating server I do this: psexec \\web1928 -u administrator -p "adminpassword" do-tasks.cmd When this runs I get the following response at the command line: c:\Windows\system32>powershell -command "&{ set-executionpolicy unrestricted}" and the script runs no further. I can't ctrl-c to break the script and I just see ^C characters, I can type input from the keyboard and the characters are echoed to console. On the remote server I see that PowerShell.exe and CMD.exe are running in Task Manager's Process tab. If I end these processes then control returns to the command line on the originating server. I have tried this with just a simple .cmd batch file with a @echo hello world and it works just fine. Running do-tasks.cmd on the remote server via an RDP session works ok as well. Why is my remote batch file getting stuck when executing via PSEXEC?

  Read the article

• Commvault Oracle RMAN Restore to new host

  - by Glenn Stauffer

  We use Commvault Simpana 8 and I have a situation where I have backups of an Oracle database on tape that were taken from Host A. Host A suffered a disk failure (lost its raid configuration) and the sys admins are trying to restore it; in the meantime, I'd working to bring the database back up on another host - Host B. I'm running into problems and am trying to sort out the parameters that need to be passed to the Commvault media agent to get this to work. Unfortunately, I do not have access to Commvault support and the backup person is unavailable. Any one have a clue? The backups are there and the media agent reported a successful write when they ran last night. This is what fails: RMAN run { allocate channel t1 device type sbt_tape parms='SBT_LIBRARY=/usr/local/galaxy/Base/libobk.so,BLKSIZE=262144, ENV=(CvClientName=dbsrv2,CvInstanceName=Instance001, CVOraRacDBName=BBDB, CVOraRACDBClientName=BBDB)'; restore spfile to pfile '/tmp/bbdb.ora' from autobackup; }2 3 4 allocated channel: t1 channel t1: sid=34 devtype=SBT_TAPE channel t1: CommVault Systems for Oracle: Version 7.0.0(Build76) Starting restore at 09-MAY-10 channel t1: looking for autobackup on day: 20100509 channel t1: autobackup found: c-3941155360-20100509-01 released channel: t1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 05/09/2010 18:01:35 ORA-19870: error reading backup piece c-3941155360-20100509-01 ORA-19507: failed to retrieve sequential file, handle="c-3941155360-20100509-01", parms="" ORA-27029: skgfrtrv: sbtrestore returned error ORA-19511: Error received from media manager layer, error text: sbtrestore: Job[0] thread[26316]: InitializeCLRestore() failed.

  Read the article

< Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >