Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 67/1008 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

  - by Alexandr Kurilin

  My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

  Read the article

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Can't install TeamViewer on Ubuntu 12.04

  - by Roel

  I have a Dell Inspiron 6400 laptop. I was a Windows user but I want to start using Ubuntu from now on. Everything goes well except installation of the teamviewer. I have downloaded the file from the official website. There, it says that just double click on the *.deb file and it will install it automatically. Well, it gives an error: Failed to remove essential system package, You requested to remove a package which is an essential part of your system. Then I tried the second way of installation, which is on the terminal. I types as suggested: sudo dpkg -i teamviewer_linux.deb. It started installing but later on failed. HEre is the copy of the screen. Preparing to replace teamviewer7:i386 7.0.9377 (using teamviewer_linux.deb) ... Unpacking replacement teamviewer7:i386 ... dpkg: dependency problems prevent configuration of teamviewer7:i386: teamviewer7:i386 depends on bash (>= 3.0). teamviewer7:i386 depends on libc6 (>= 2.7). teamviewer7:i386 depends on libasound2. teamviewer7:i386 depends on zlib1g. teamviewer7:i386 depends on libxext6. dpkg: error processing teamviewer7:i386 (--install): dependency problems - leaving unconfigured Errors were encountered while processing: teamviewer7:i386 I have already checked these dependent files in Synaptic and they are all installed. What am I doing wrong?

  Read the article

• Display date/time in Ubuntu lock screen (cinnamon-like)

  - by 3l4ng

  I was using Ubuntu 13.04 till a few days ago. I had installed Nemo and I guess cinnamon got installed too (I was still using Unity nonetheless). One of the good things about that was the lock screen somehow changed to mimick cinnamon's (with the background as a darkened version of desktop background and date/time displayed), something like this: I have no idea how this happened, but it looked great. It does not seem to work on Ubuntu 13.10. Anyone has any ideas to get a similar lock screen? I just need to display the date/time on one side with the bg as a darkened version of my desktop wallpaper

  Read the article

• Ubuntu 12.04 transmission-daemon and zfsonlinux: bad file descriptor and corrupt pieces

  - by Ivailo Karamanolev

  I'm running a Ubuntu 12.04 with zfsonlinux and transmission-daemon. The issues: sporadic Bad File Descriptor and Piece #xxx is corrupt errors. After I recheck the torrent, everything seems fine. That happens only when downloading: once it's in seeding mode. This only happens after the torrent client has been running for some time. I installed zfsonlinux from the offical stable ppa (https://launchpad.net/~zfs-native/+archive/stable). I previously tried running transmission-daemon from the Ubuntu repository, but since I've switched to building the latest transmission from source with the latest libevent (all stable) - same thing. I've seen bug reports (https://trac.transmissionbt.com/ticket/4147) for that issue, but none of them seem to have a solution. How can I fix these errors, or at least understand where they come from and what I can do to rectify the issue?

  Read the article

• Ubuntu 12.04 doesn't recgonize m CPU correctly

  - by Nightshaxx

  My computer is running ubuntu 12.04 (64bit), and I have a AMD Athlon(tm) X4 760K Quad Core Processor which is about 3.8ghz (and an Radeon HD 7770 GPU). Yet, when I type in cat /proc/cpuinfo - I get: processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 16 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 1 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 17 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 2 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 18 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 3 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 2 apicid : 19 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro The important part of all this being, cpu MHz : 1800.000 which indicates that I have only 1.8ghz of processing power, which is totally wrong. Is it something with drivers or Ubuntu?? Also, will windows recognize all of my processing power? Thanks! (NOTE: My cpu doesn't have intigrated graphics

  Read the article

• upgraded "Compiz' and "Unity", now no Unity 3D on screen

  - by user18432

  Today when I logged in to my Ubuntu 12.04, the update manager told me of some upgrades. Compiz and Unity were in those upgrades. After I installed the upgrades, I can no longer get the Unity panel on the left side of screen or the systray at the top of screen. I now have to run Ubuntu 12.04 with Unity 2D. My laptop is a HP Pavilion dv9000 with Nvidia GeForce Go 7600 video. I tried to run "unity --reset" but it says there are serious issues with compiz. I have cut & pasted the read out from the terminal below. [09:35:02] xxxxxxx@L01U1204:~$ unity --reset unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x2e00004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x580005a compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3600006 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3200255 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1600002 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1400002 Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done I/O warning : failed to load external entity "/home/brwright/.compiz/session/10afaca1703486b216133648409481824100000130110002" Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunityshell.so' : /usr/lib/compiz/libunityshell.so: undefined symbol: _ZNK5unity4dash10Controller6windowEv compiz (core) - Error: Couldn't load plugin 'unityshell' compiz (core) - Warn: unhandled ConfigureNotify on 0x7000090! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000093! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000096! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000099! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009c! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009f! compiz (core) - Warn: this should never happen. you should probably file a bug about this. Initializing annotate options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing cube options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing mag options...done Initializing neg options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing screenshot options...done Initializing shift options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing thumbnail options...done Initializing unityshell options...done Initializing water options...done Initializing winrules options...done Initializing wobbly options...done Setting Update "main_menu_key" Setting Update "run_key" Starting gtk-window-decorator As you can see the terminal never comes back to the CI prompt. I must do a control C to get to the CI prompt, but then the OS is frozen. I have to reboot and run Unity 2D in able to do anything on my laptop. I hope I have explained this enough and provided some useful info. I am at a loss to understand what the problem is, or what exactly what is causing the problem. Is it Unity or Compiz? Can anyone help?

  Read the article

• Davicom Semiconductor, Inc. 21x4x DEC-Tulip not detected by Wireshark but IP operational

  - by deepsix86

  Recently flipped to Ubuntu 11.10 on a Dell 4300 (Intel). Getting IP address and no issues (ping/surf) but Wireshark unable to detect eth0 interface. I see references in forums to blacklist tulip but looks like I am running dmfe. Not sure if the blacklist is required and where to go from here. Maybe Driver update? Got a little lost looking in that area. Some h/w details below (IP/MAC/HOSTNAME removed) Linux xxxxxx 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 i686 i686 i386 GNU/Linux network-admin (HOSTS TAB) does not list eth0, only loopback and bunch of IPv6 interfaces ifconfig eth0 Link encap:Ethernet HWaddr xxxxxxxx inet addr:192.168.x.xx Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxx 64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36662 errors:0 dropped:1 overruns:0 frame:0 TX packets:24975 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:42115779 (42.1 MB) TX bytes:3056435 (3.0 MB) Interrupt:18 Base address:0xe800 lspci 02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) Subsystem: Device 4554:434e Flags: bus master, medium devsel, latency 64, IRQ 18 I/O ports at e800 [size=256] Memory at fe1ffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at fe200000 [disabled] [size=256K] Capabilities: [50] Power Management version 2 Kernel driver in use: dmfe Kernel modules: dmfe hwinfo --netcard 20: PCI 209.0: 0200 Ethernet controller [Created at pci.318] Unique ID: rBUF.0NgK5ZS9c0D Parent ID: 6NW+.siohrLUzzI4 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.0 SysFS BusID: 0000:02:09.0 Hardware Class: network Model: "Davicom 21x4x DEC-Tulip compatible 10/100 Ethernet" Vendor: pci 0x1282 "Davicom Semiconductor, Inc." Device: pci 0x9102 "21x4x DEC-Tulip compatible 10/100 Ethernet" SubVendor: pci 0x4554 SubDevice: pci 0x434e Revision: 0x31 Driver: "dmfe" Driver Modules: "dmfe" Device File: eth0 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfe1ffc00-0xfe1ffcff (rw,non-prefetchable) Memory Range: 0xfe200000-0xfe23ffff (ro,non-prefetchable,disabled) IRQ: 18 (61379 events) HW Address: 00:08:a1:01:35:70 Link detected: yes Module Alias: "pci:v00001282d00009102sv00004554sd0000434Ebc02sc00i00" Driver Info #0: Driver Status: dmfe is active Driver Activation Cmd: "modprobe dmfe" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (PCI bridge)

  Read the article

• GTK equivalent to MS Spy++

  - by zetah

  Spy++ comes with paid version of MS Visual Studio as utility that gives you a graphical view of the system’s processes, threads, windows, and window messages. and it's not only utility on Win32 that offers this feature, but I use it as popular example. It lists all UI elements of all running applications, and user can use "Find Tool" to locate UI element of interest and get response dialog with versatile information about that object, like UI control name, text contents, and many other data of potential interest to a programmer. I'm interested in similar GTK application which can at least return GTK UI element (widget) name and extracted text contents of that element of arbitrary running process. I couldn't find anything related using Google

  Read the article

• Tomcat still running after uninstalling

  - by Rohit Jain

  I installed tomcat7 using the following command: sudo apt-get install tomcat7 Then to uninstall it, I used below command: sudo dpkg -l|grep tomcat This listed all the packages related to tomcat. Then I removed tomcat7: sudo dpkg -P tomcat7 After that, I saw that, some related package were still there, and surprisingly I was still able to access the tomcat home page at - http://localhost:8080. So, I tried to remove it using the following command: sudo apt-get remove tomcat7 sudo apt-get autoremove But, still I was able to access the tomcat home page. So I re-booted my PC, thinking that the effect will take effect after that. But again, I'm still able to access the homepage. That means that tomcat is still running on my PC. What's going on here? Have I followed the steps correctly to uninstall tomcat. I want to uninstall to re-install a private instance of tomcat. I found out that the directory - /usr/share/tomcat7, is still there: /usr/share/tomcat7$ ls conf log webapps Is it something to do with the uninstallation?

  Read the article

• Ubuntu Touch porting: bad file tree

  - by fcole90

  I'm trying to port ubuntu touch to Samsung Galaxy S Plus but I'm finding it really difficult. The problems at first were to find a good CM rom as base, because this device is not officially supported by CM. Currently I'm using EhndroixIII but now I'm founding a lot of problems with the porting guide. In particular my file tree seems totally different from the one of the guide. For example, there is no device folder. What can I do to solve? Should I create those files? My repository is https://github.com/fcole90/utouch-sgsp.git

  Read the article

• Ubuntu 12.10 broken, shutdown while updating

  - by UnknownDude

  I got the following problem: My PC shutdown while upgrading from 12.04 to 12.10. Everything seems to work but I can't install the missing updates. It always tells me to run apt-get install -f, but when I do so it just says: (It's in German, hope it doesn't matter) Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Abhängigkeiten werden korrigiert... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: espeak gcc-4.6-base:i386 gir1.2-notify-0.7 libcamel-1.2-29 libebook-1.2-12 libedataserver-1.2-15 libgconf2-4 libgnome-bluetooth8 libgnome-menu2 libgnomekbd7 libgomp1:i386 libgweather-3-0 libimobiledevice2 libindicate5 libkpathsea5 libpoppler19 libusbmuxd1 python-gmenu Verwenden Sie »apt-get autoremove«, um sie zu entfernen. Die folgenden zusätzlichen Pakete werden installiert: nvidia-current-updates xserver-xorg-core xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-savage xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-vesa xserver-xorg-video-vmware Vorgeschlagene Pakete: xfonts-100dpi xfonts-75dpi gpointing-device-settings touchfreeze firmware-linux Die folgenden Pakete werden ENTFERNT: nvidia-current Die folgenden Pakete werden aktualisiert (Upgrade): nvidia-current-updates xserver-xorg-core xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-savage xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-vesa xserver-xorg-video-vmware 20 aktualisiert, 0 neu installiert, 1 zu entfernen und 133 nicht aktualisiert. 8 nicht vollständig installiert oder entfernt. Es müssen noch 0 B von 70,6 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 184 MB Plattenplatz freigegeben. Möchten Sie fortfahren [J/n]? j (Lese Datenbank ... 242727 Dateien und Verzeichnisse sind derzeit installiert.) Entfernen von nvidia-current ... Removing all DKMS Modules Error! There are no instances of module: nvidia-current 295.40 located in the DKMS tree. Done. Traceback (most recent call last): File "/usr/bin/quirks-handler", line 26, in <module> import Quirks.quirkapplier File "/usr/lib/python2.7/dist-packages/Quirks/quirkapplier.py", line 26, in <module> import XKit.xutils ImportError: No module named XKit.xutils dpkg: Fehler beim Bearbeiten von nvidia-current (--remove): Unterprozess installiertes pre-removal-Skript gab den Fehlerwert 1 zurück Trigger für bamfdaemon werden verarbeitet ... Rebuilding /usr/share/applications/bamf.index... Trigger für libc-bin werden verarbeitet ... ldconfig deferred processing now taking place Fehler traten auf beim Bearbeiten von: nvidia-current E: Sub-process /usr/bin/dpkg returned an error code (1) When I try to remove nvidia-current it tells me to run apt-get install -f. Do you guys have any idea? I don't want to reinstall my whole system, takes a lot of time to encrypt everything again and so on.

  Read the article

• Package operation failed when updating 12.04

  - by Gausstein

  Whenever I try to update 12.04, I get the "Package Operation Failed" message. I haven't been able to update my system. In the "Details" section it says: installArchives() failed: Extracting templates from packages: 30%% Extracting templates from packages: 61%% Extracting templates from packages: 91%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 30%% Extracting templates from packages: 61%% Extracting templates from packages: 91%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 30%% Extracting templates from packages: 61%% Extracting templates from packages: 91%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 30%% Extracting templates from packages: 61%% Extracting templates from packages: 91%% Extracting templates from packages: 100%% Preconfiguring packages ... dpkg: error: parsing file '/var/lib/dpkg/available' near line 42150 package 'x11-apps': blank line in value of field 'Description' Error in function:

  Read the article

• Connect to Google Talk without giving access to my full Google Account

  - by bneijt

  I would like to use Empathy as a Google Talk client. When I choose to go online, I'm asked to give [email protected] (Ubuntu) access to manage my online Photo's, Google Drive, Emails and Videos. I don't understand why Ubuntu has to have all these permissions on my Google account, does this mean Ubuntu will start syncing my Google account to Ubuntu One? Can I connect to Google Talk without granting access to my Videos, Emails and Photos to Ubuntu? What do you guys want with all my online things?

  Read the article

• How can I configure the Aiptek T-6000U graphics tablet?

  - by mejpark

  I followed AiptekTablet instructions on the Ubuntu Wiki to configure 11.04 for use with my graphics tablet. I installed the xserver-xorg-input-aiptek package and created two files with the options detailed on the Wiki page above: $ cat /lib/udev/rules.d/69-xserver-xorg-input-aiptek.rules ACTION!="add|change", GOTO="xorg_aiptek_end" KERNEL!="event[0-9]*", GOTO="xorg_aiptek_end" ATTRS{idVendor}=="08ca", ENV{x11_driver}="aiptek", SYMLINK+="input/aiptektablet" LABEL="xorg_aiptek_end" $ cat /usr/share/X11/xorg.conf.d/50-aiptek.conf Section "InputClass" Identifier "pen" MatchProduct "Aiptek|AIPTEK|aiptek" MatchDevicePath "/dev/input/event*" Driver "aiptek" Option "USB" "on" Option "Type" "stylus" Option "Mode" "absolute" Option "zMin" "0" Option "zMax" "511" EndSection The 50-aiptek.conf file was originally called 10-aiptek.conf as in the Wiki, but an Aiptek tablet installation help thread on the Ubuntu Forums, suggested changing 10 to 50. Any ideas? Thank you.

  Read the article

• Machine Check Exception

  - by Karl Entwistle

  When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

  Read the article

• VBoxManage modifyhd --resize doesn't exist?

  - by George Korac

  I'm trying to increase the size of a VirtualBox Win7 .vdi disk on Ubuntu 10.04 but when I try executing VBoxManage modifyhd /path/disk.vdi --resize 15360 it returns Syntax error: unknown option: --resize. I'm unsure as to why this is happening because I've used it before and it's still listed under valid options for VBoxManage modifyhd in the VirualBox User Manual . Cheers, George @maniat1k george@george-laptop:~$ VBoxManage modifyhd '/home/george/.VirtualBox/HardDisks/Windows 7 64bit.vdi' --resize 15360 Sun VirtualBox Command Line Management Interface Version 3.1.6_OSE (C) 2005-2010 Sun Microsystems, Inc. All rights reserved. Usage: VBoxManage modifyhd | [--type normal|writethrough|immutable] [--autoreset on|off] [--compact] Syntax error: unknown option: --resize

  Read the article

• How do I disable unwanted iPXE boot attempt in Libvirt/qemu-kvm?

  - by gertvdijk

  Somehow after upgrading to 12.04, my virtual machines always boot with an attempt to boot from the network first. See this: while I don't have any PXE configuration set: I've tried: to disable SPICE, by changing the emulator to /usr/bin/kvm from /usr/bin/kvm-spice by editing the XML. Ctrl+B to configure the iPXE, but it doesn't let disable this as a boot option. setting another type of NIC - not an option, I need virtio for performance reasons. However, e1000e doesn't work either. removing the NIC: works. However, I need network. Googling around. Hard. Lots of result is about failing configured PXE boots. Not a big issue, but it increases boot times by 50-100% here (booting from SSD), so it's relatively long and annoys me. How can I disable this and boot from virtual hard disk directly?

  Read the article

• Shell script issue: cron job script to Restart MySQL server when it stops accidentally

  - by Straw Hat

  I have this script, I am using it to setup CRON job to execute this script, so it can check if MySQL service is running; if not then it restart the MySQL service: #!/bin/bash service mysql status| grep 'mysql start/running' > /dev/null 2>&1 if [ $? != 0 ] then sudo service mysql restart fi I have setup cron job as. sudo crontab -e and then added, */1 * * * * /home/ubuntu/mysql-check.sh Problem is that it restart MySQL on every cron job execution.. even if server is running it restart the MySQL service what is correction in the script to do that.

  Read the article

• NTFS and NTFS-3G

  - by MestreLion

  I have a netbook with Ubuntu Netbook 10.04 and a desktop with Mint 10 (~ Ubuntu Desktop 10.10) Both of them have read/write NTFS partitions mounted via /etc/fstab. And it works fine. Ive read on net, google, forums, and several posts here, that NTFS-3G is the driver that allows you to have full access to an NTFS partition, that it is new, great, powerful, yada-yada. But... my entries use plain ntfs, no mention of -3g, and they still work perfectly as read and write. Am I already using ntfs-3g? Does 10.04 onwards use it "under the hood"? How can i check that in my system? Should my /etc/fstab entries should use "ntfs-3g" as the fs? Why some posts refer to mount ntfs, while others say mount ntfs-3g ? Im really confused about where should I use fs-type names (ntfs) or driver names (ntfs-3g?). Or is it irrelevant now, and ntfs is always an "alias" or something for ntfs-3g nowadays? Ive read some posts her, from Oct-10 and Nov-10 e that "announce" that ntfs-3g "finally arrived"... thats way post-Lucid 10.04. Could someone please undo this mess in my head, and explain the relation between ntfs and ntfs-3g, what is the current status (10.04 and 10.10), where should i use each, etc (regarding mount, fstab, etc)? Sorry for the long, confusing, redudant text... im really getting sleepy

  Read the article

• Java-JDBC-MySQL Error

  - by LeonardPeris

  I'm trying to get my java program to talk to a MySQL DB. So i did some reading and downloaded MySQL Connector/J. I've extracted it into my home directory ~. Here are the contents. user@hamster:~$ ls LoadDriver.class LoadDriver.java mysql-connector-java-5.1.18-bin.jar The contents of LoadDriver.java are user@hamster:~$ cat LoadDriver.java import java.sql.Connection; import java.sql.DriverManager; import java.sql.SQLException; // Notice, do not import com.mysql.jdbc.* // or you will have problems! public class LoadDriver { public static void main(String[] args) { try { // The newInstance() call is a work around for some // broken Java implementations Class.forName("com.mysql.jdbc.Driver").newInstance(); } catch (Exception ex) { System.out.println(ex); } } } The contents are the same from http://dev.mysql.com/doc/refman/5.1/en/connector-j-usagenotes-basic.html#connector-j-usagenotes-connect-drivermanager with the only change that the Exception is being printed to console in the catch block. I compile it as follows leonard@hamster:~$ javac LoadDriver.java When I try to execute it, the following is the ouput. leonard@hamster:~$ java LoadDriver java.lang.ClassNotFoundException: com.mysql.jdbc.Driver This output is consistent with the executing command, but when trying to run it with the prescribed CLASSPATH method I run into the following issue. leonard@hamster:~$ java -cp /home/leonard/mysql-connector-java-5.1.18-bin.jar LoadDriver Exception in thread "main" java.lang.NoClassDefFoundError: LoadDriver Caused by: java.lang.ClassNotFoundException: LoadDriver at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at java.lang.ClassLoader.loadClass(ClassLoader.java:321) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294) at java.lang.ClassLoader.loadClass(ClassLoader.java:266) Could not find the main class: LoadDriver. Program will exit. Am I missing something? How do I get MySQL's own code samples running.

  Read the article

• System reverts to 87Hz refresh rate at every startup after I have installed nvidia drivers

  - by Mohammad Kamil Nadeem

  Every time the system starts the screen's refresh rate reverts to 87Hz which results in a pixelated and flickery screen which I have to manually correct every time by either selecting 60Hz as my refresh rate. I have tried "save to X configuration files" and even tried by making the changes as Root but to no avail as it again reverts to 87Hz on every system startup The Open Source Drivers are Okay for regular Unity but many games don't work on it hence I had to install the nvidia drivers. I have been facing this since the Beta Phase although this is on a fresh installation of 12.04 final release. I am also providing my Xorg.conf file just in case it might help http://paste.ubuntu.com/952196/ Also for some reason Displays shows my CRT monitor as Laptop but on open source drivers it was mentioning it as a 14" CRT only This bug is also present on Edubuntu 12.04 This is not present on Xubuntu 12.04 I had selected to install updates and 3rd party software on the install and was greeted with a correct refresh rate screen on the Boot Up. I like Xubuntu.

  Read the article

• Apparmor not starting with kernel LSM error

  - by Roberto Aloi

  Starting apparmor on a Ubuntu Lucid Lynx gives the following: user@host:~$ sudo /etc/init.d/apparmor start * Starting AppArmor profiles * AppArmor not available as kernel LSM. ...fail! Googling a bit, I found the following bug report - marked as fixed -: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/375422 Which seems to be my exact case. My kernel is 2.6.32-21-generic. Any idea on how to solve the issue?

  Read the article

• Acer Aspire blank screen

  - by Gerep

  I'm using Ubuntu 11.04 Natty and when I installed it I had a problem with blank screen on startup and found a solution but I have the same problem when it is inactive and goes blank screen, it won't come back, so I have to restart. Any ideas? Thanks in advance for any help. This is what solved my first problem: When you start editing the /etc/rc.local and add before exit 0: setpci -s 00:02.0 F4.B=00 Edit /etc/default/grub, edit the line GRUB_CMDLINE_LINUX_DEFAULT: GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash acpi_osi = Linux" Update grub with: sudo update-grub2

  Read the article

• Chroot into a 32 bit version of ubuntu from a 64 bit host

  - by Leif Andersen

  I have a piece of software that only runs on 32 bit linux (Xilinx webPack 10.1, apperently it 'has' to be the old version because that's the latest one compatible with their boards), anyway, this version is only compatible with 32 bit linux. So, I head off to this page to see what I can do: https://help.ubuntu.com/community/32bit_and_64bit Of the 4 options (listed at the bottom): I already installed ia32-libs, and it's still not working I could do that one if needed (which I ended up doing). No, I don't want to be working from a vm all of next semester, that would be painful and I'd rather just reinstall my whole computer to a 32 bit os (which I don't want to do). It didn't sound like it was the best option based on what I've seen. So I went off to do #2, and set up a chroot for 32 bit ubuntu. It linked to this tutorial: https://help.ubuntu.com/community/DebootstrapChroot As I'm running ubuntu 10.10 I made the lucid and newer version changes. Which is to say I wrote: [hardy-i386] description=Ubuntu 8.04 Hardy for i386 directory=/srv/chroot/hardy-i386 personality=linux32 root-users=leif type=directory users=leif to /etc/schroot/chroot.d/hardy-i386 (Note though that I did save it once before I had the file properly formatted, I saved the correct version moments later though). I then ran: $ sudo mkdir -p /srv/chroot/hardy_i386 $ sudo debootstrap --variant=buildd --arch i386 hardy /srv/chroot/hardy_i386 http://archive.ubuntu.com/ubuntu/ Then I ran: $ schroot -l And it showed the proper chroot, but then when I ran: $ schroot -c hardy-i386 -u root I got the following error: E: 10mount: error: Directory '/srv/chroot/hardy-i386' does not exist E: 10mount: warning: Mount location /var/lib/schroot/mount/hardy-i386-80359697-2164-4b10-a05a-89b0f497c4f1 no longer exists; skipping unmount E: hardy-i386-80359697-2164-4b10-a05a-89b0f497c4f1: Chroot setup failed: stage=setup-start Can anyone help me figure out what the problem is? Oh, by the way: /srv/chroot/hardy-i386 most certainly exists. I've also tried it replacing all references with hardy to lucid, to no avail. Oh, one more thing, I did set up the chrome os environment a month back or so: http://www.chromium.org/chromium-os/developer-guide and it had me use something with chmod. So, can anyone figure out what the problem is? Thank you.

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >