Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 67/97 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

• Intel Rapid Storage Technology - Raid5 is very slow

  - by Cederstrom

  Hi, I build a computer with a raid5, using the motherboards raid controller (ASUS P7H57D-V EVO - intel Rapid Storage Technology). The read and write are however very slow, when using the raid controller :( - I am using Windows 2008 R2, and when using the windows software raid, it was ok in speed - so there must be an issue with the controller? Im using 6 disks on 2TB each. Do anyone have any idea why its so slow, and how to fix it? I rather not pick the easy solutiuon of "just buy a raid controller" :| If you need more info about my setup, please just ask. Thanks :)

  Read the article

• Windows 7 Wakeup from Sleep then Shutdown

  - by Kevin Hua

  Is this caused by low battery? I have an Asus UX31A, and I left it unattended. As usual, in 5 minutes, it went to sleep mode with the lid still open. I came back a couple hours later, and I noticed the laptop was off. I was still able to turn it on by manually pressing the power button (battery was at 2% though), but I don't understand why it shut off. If it was in sleep mode and the battery was near depletion, then wouldn't that result in a "Windows has recovered from an unexpected shutdown" upon boot? Does Windows have a mechanism to wake from sleep from a super critical battery level to shut down all programs and power down the system completely? I noticed that upon booting, firefox didn't give a fit about improper shutdown. Here are my power settings btw, powercfg -h off has been ran, so hibernation is off. And here is the event log: http://www.mediafire.com/download.php?lbfhl21g0nj2adi

  Read the article

• How to lock the c prompt?

  - by allindal

  Is there anyway to lock the command prompt? I need my computer to require a password to use the command prompt. I lock the workstation occasionally but sometimes I forget and if I could just prevent my roommate from doing the "c: net user user *" to change my password it would be great. I do not want to have to use the rundll.32 user command with script to automatically lock the computer. Just a way to lock the c prompt. Sorry for not saying this earlier, I'm running a vista 32bit Asus gene II motherboard with a core i7 CPU

  Read the article

• Why FreeBSD won't reboot after kernel crash?

  - by Max Kosyakov

  Once in a while I get my server running FreeBSD 8.0 amd64 fail due to bad memory (incompatible with motherboard) modules. Each time it happens, the box stalls with the last note saying that it will automatically reboot in 15 second, but it never does. How do I fix this? I need computer to reboot after kernel crash, unattended. (Please do not recommend to replace memory, as soon as I get the modules, I will, but I need a quicker solution that will not require me to stand still next to the box just to press the reset button each time it crashes.)

  Read the article

• Recover data from phyiscally damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: Picture of damage I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a phyiscally damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are.

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• Monitor weirdness/flickering with new Viao PCG-3112L

  - by Rosarch

  I have a Sony VAIO PCG-3112L running Windows 7. It worked fine on one monitor, but now I'm using it with a 2 year old LG Flatron W2252TQ-TF. The colors are sorta off (although that might just be the monitor), but more annoyingly there are many horizontal flickering lines. It's more noticeable on non-white backgrounds. I tried rebooting the monitor, and reseting it to factory settings, but that didn't solve the issue. What could be the cause of this? The monitor works fine with an Asus netbook. I have checked that both ends of the VGA cable are plugged in between the Vaio and the monitor.

  Read the article

• Is it better to always purchase as much as higher in Watts SMPS, for PC?

  - by metal gear solid

  Is it better to always purchase as much as higher in Watts SMPS, for PC? Does higer watts SMPS also consume more power (electricity bill)? How to know how much watts of SMPS we should purchase? What are factor who decide how much watt of power will need? I'm going to purchase a new Motherboard + CPU + HDD + RAM + DVD Wrtiter + SATA 500 GB HDD ? I'm not purchasing any external Graphic Card. How to decide which watt of SMPS ,I should purchase?

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• Few questions about SLI

  - by toomanyairmiles

  Hi all, thanks in advance for your help. I've just added a second card to my system so I can add a third monitor. I'd got as far as determining both cards need to use the same driver (after a blind alley with another cheap ATi card) so I'm now the proud owner of a second BFG 9800 GTX+ card. One is a BFG OCX and the other an BFG OC (small difference in clock speeds but they are in all other respects the same) but wanted to know the following:- 1) Is it worth adding the SLI connector, will it really boost overall performance (I'm guessing that the OCX card will then perform as the OC card does)? 2) Are SLI connectors (the one's that run across the top of the cards) motherboard or manufacturer specific? 3) If I do SLI the cards will I still be able to use all four monitor connectors or just the two on the master card? I'm not a gamer, I'm an IA and web designer so the system is mostly for Photoshop and Illustrator work and the occasional knock around in command and conquer.

  Read the article

• Windows 7 has trouble installing software with Visual C++ 2005 & 2008

  - by John Fitzgerald

  I have been reinstalling Windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately loses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up losing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and Visual Studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

  Read the article

• Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

  - by Chris C.

  I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

  Read the article

• DVD ROM not working only in windows?

  - by Behrooz A

  I have an Asus N53SV laptop, My DVD rom doesn't read any type of DVD in windows , but I just installed windows 7 from a bootable DVD , I think this problem occurred after I tried to change my partitioning with paragon partition magic , I was trying to shrink , join and so , after that my windows showed an error that windows cannot find [weird address] on hard disk every time on starts. windows itself says the DVD drive works correctly and driver is working properly, but no DVD or CD can be read , note that the DVD I'm trying to read is the same DVD which I used to install windows some minutes ago. I don't know what's the problem

  Read the article

• What kind of SATA interface is on a Thinkpad X120E?

  - by Jorge Castro

  I recently ordered a Thinkpad X120E with an AMD Fusion (Zacate) chipset. I am eyeballing an SSD for it, however newer SSDs are coming out with 6Gbps SATA interfaces. I doubt such a cheap laptop has 6Gbps SATA, but I'm debating waiting the a bit longer until the Intel 510 series come out, if anything to future proof myself by putting it in this laptop and then later on when I do upgrade to a laptop with 6Gbps SATA I'll be good to go. The hardware manual mentions that the motherboard is for a "AMD Fusion E-350" but the specifications of each hardware part isn't part of the manual. Does anyone have any information on the kind of SATA controllers in Fusion laptops so I can make a better purchasing decision?

  Read the article

• Is it safe to run an operating system from an USB flash drive?

  - by Georg

  I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

  Read the article

• Graphics Card Compatability

  - by Aaron

  I am a first time builder and while I have the basic understanding of how to put a computer together, one final thing eludes me. What are the requirements for instaling 2 or more graphics cards on a computer? Example: EVGA 015-P3-1589-AR GeForce GTX 580 (Fermi) FTW Hydro Copper 2 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card ECS NGTX580-1536PI-F GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I am not planning on buying either of these cards in the near future. I simply am using them as an example because of the number of differences. As I understand it these two cards will work together (given the proper motherboard) because the only thing that matters is that they are both GeForce GTX 580. Is my assumption correct? If not, why?

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state [closed]

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

  Read the article

• Brightness too dark or too bright

  - by YatharthROCK

  Basically, below a seemingly-arbitrary threshold (seems to be around 60%) my laptop screen is too dark to really make out much, and above that threshold it takes its maximum brightness (which is waay too bright for my eyes). This problem only occurs when I change the brightness using Windows' UI. Changing the brightness using Fn keys on my keyboard works as expected; unless the screen went into dark mode because of Windows, in which case they have no effect. This problem started occuring on my ASUS laptop very recently. My laptop has a poor battery, but I don't think that's related. What is going on? I tried resetting power plan settings, turning off adaptive brightness and restarting. I'll give any info asked for. Help required urgently...

  Read the article

• Could today's windows update have caused boot problems?

  - by gjvdkamp

  I have a 64 bit box that is dual boot Windows 7 64bit and Ubuntu. I booted into windows today and saw the 'updates ready' sign on the shutdown button so I clicked to let it install. It took a while to install 2 updates. Then I rebooted but now it doesn't get past the motherboard splash screen. So I don't even get the disks found messages or let alone the prompt to choose windows or Linux. Cold this be caused by the updates? Seems weird for a windows patch to have consequences beyond the windows os, but it seems unlikely to be a coincidence Thanks, Gert-jan

  Read the article

• HP Z210 SFF: two different video cards produce no Displayport output when installed

  - by ConcernedOfTunbridgeWells

  I have a HP Z210 SFF that I'm trying to install a video card into. I've tried two different cards in Slot 2 (a Quadro FX380LP and a Quadro 600). Neither of these cards produce a displayport signal when installed. With neither installed the displayport port on the motherboard works fine with the built in graphics. When I install the cards it produces no signal and the cards don't either. The Quadro 600 is brand new and the odds of having two dead video cards is quite low. Is there something fundamental that I could be missing out - a BIOS setting maybe?

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >