Search Results

Search found 22968 results on 919 pages for 'stuck again'.

Page 676/919 | < Previous Page | 672 673 674 675 676 677 678 679 680 681 682 683  | Next Page >

• Number of routers in small community lock up and require reboot.

  - by Anthony Hiscox

  I live in a small town which has one primary ISP. Lately I have noticed that a number of wireless routers have been locking up and requiring a reboot before allowing any connections. This has affected two of my routers, my work router, and a few others. In all cases wired continued to function as usual. Often wireless clients can see the SSID but simply won't connect. I can only think of a few possibilities and was hoping someone here might be able to point me in the right direction: Our ISP is well known to be flaky, something they are doing is causing this, what that might be I have no clue it as seems to affect the wireless only. There's a power issue in town, given our remote location and reputation for crap electrical, this seems reasonable. Only one router was plugged in to a UPS, and I'm not sure of the quality. There is some bug in all the different firmware for every one of these routers (all different). That doesn't seem reasonable, unless; it's an unknown (or known) exploit or DoS of some sort being launched by a massive team of ninjas hell bent on forcing us all to be tethered to our walls by ethernet cables or; it's just been a coincidence and I'm just paranoid (this has some weight, I mean read 4 again). Anyone else experience similar issues and have some tips?

  Read the article

• Unable to connect via NetBIOS Name

  - by grom

  I can't connect to machines/shares by NetBIOS names. Below is console output showing the problem. C:\>nbtstat -n Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Local Name Table Name Type Status --------------------------------------------- BEAST <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BEAST <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered WORKGROUP <1D> UNIQUE Registered ..__MSBROWSE__.<01> GROUP Registered C:\>nbtstat -A 192.168.1.3 Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- BRCLAPTOP <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BRCLAPTOP <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered MAC Address = 00-1C-BF-14-B8-6E C:\>ping beast Pinging beast [fe80::59b8:179f:b90b:a63f%11] with 32 bytes of data: Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Ping statistics for fe80::59b8:179f:b90b:a63f%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping brclaptop Ping request could not find host brclaptop. Please check the name and try again. C:\>nbtstat -a brclaptop Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] Host not found.

  Read the article

• Connecting a laptop to a TV via HDMI

  - by Madmartigan

  I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

  Read the article

• Synchronize two directories on linux pc

  - by Gab

  I need a distributed filesystem (or a synchronization tool) that is capable of keeping a directory synchronized across 4 pc. My requirements are: offline access (data must be available offline on each pc) preserve execution rights: some files are marked executable on a linux partition. This flag should be replicated. efficient sync strategy: some of my files are 20GB, they are changed quite often, but in very little parts (Virtualbox images). Delta transmissions are welcome. efficient handling of space: no history for files, files shouldn't be copied to temp directories "just in case you break it". it must propagate deletions of files modification can happen in any of the 4 pcs, they should be propagated when other pc are connected. Other specs of my solution are: Sync is over a lan, the total amount of data to be synced is around 180GB, in some ten thousand files. Changes are small, but can happen in big files. At the moment i'm interested in a linux only solution. conflicts either don't happen or are solved with "last one wins" I haven't found any good solution. I've been trying: unison: it is the only one working at the moment, but during the hashing phase it hangs my pc for some minute, disk light steady on. Sparkleshare doesn't handle large files nicely. It keeps an history of all your changes that grows up indefinitely. They promise it will be fixed in next releases, but at the moment it still doesn't fit my needs. owncloud (keeps history of each file i change) coda ? (help! i couldn't set it up correctly!) git-annex assistant transforms all your files in symlinks and mark the original file as read only ("just in case you make a mistake while you modify it"!). Before you edit a file you have to issue a special command "git-annex unlock", that creates a local copy of the file, and you have to remember to lock it again if you want it synchronized. What to try next?

  Read the article

• How I can fix the "Display Driver has stopped responding and has recovered"?

  - by Vitor Rangel

  I'm using a GeForce GTX 580, with Windows 7 64-bit. The driver version of the GTX is 301.42. The problem happens after a few minutes, when I'm playing specifc games. It won't happen in all games - And I don't have any idea why these games doesn't work. The games that doesn't work: Battlefield 3, Civilization V, Sniper Elite V2. The games that work: Mass Effect 3, Crysis 2, Team Fortress 2, Left 4 Dead 2, Skyrim, L.A. Noire. As you can see, it's not a problem of "The games that demand more stop working". I've tryed updating the driver of the graphics-card, the bios of the motherboard, even formated my computer (It was needing it) and instaled every driver in the last version possible. This problem happens since I bought my graphics-card, 6 months ago. After a few minutes, from 10 to 20, the pixels in the monitor become strange, with random colors and effects, like it was broken. Then, everything goes black, and the message appears "Display Driver has stopped responding and has recovered". After that, I need to close the game and start again. I am not overclocking, and my temperature never goes higher than 70ºC.

  Read the article

• Capistrano + Nginx + Passenger = 403

  - by slimchrisp

  I asked this over at stackoverflow as well, but still haven't received any answers that have helped me to solve this problem. I have spent almost a week at this point trying to solve the issue, and I'm just not making any headway. It seems that this issue is pretty common, but none of the solutions I found online work for me. A buddy of mine is actually creating the same setup, and he is having the same issue. After a few days stuck with the 403 error I started over using this tutorial: http://blog.ninjahideout.com/posts/a-guide-to-a-nginx-passenger-and-rvm-server I had hoped starting from scratch using this tutorial would work, but no dice. Either way, if you view the tutorial you can see what steps I have taken. Here is essentially what I have going on. I have a VPS account on linode.com Server OS is Ubuntu 10.04 Local OS (shouldn't matter, but just so you know) used to deploy with Capistrano is Snow Leopard 10.6.6 I use RVM on the server. Version is 1.2.2 I was previously on ruby-1.9.2-p0 [ i386 ], but per the tutorial listed above I switched to ree-1.8.7-2010.02 [ i386 ]. Running 'which ruby' from the command line verifies that I am using 1.8.7 with the following output: /usr/local/rvm/rubies/ree-1.8.7-2010.02/bin/ruby passenger -v prints the following: Phusion Passenger version 3.0.2 Running 'nginx -v' gives me a message that the command nginx could not be found. The server is definitely there and running as I can use nginx to serve static files, but this could have something to do with my problem. I have two users dealing with the install. root which I used to install everything, and deployer which is a user I created specifically to for deploying my applications My web app directory is in the deployer user's home directory as follows: /home/deployer/webapps/mysite.com/public Per Capistrano default deploy, a symbolic link called current is created in the public folder, and points to /home/deployer/webapps/mysite.com/public/releases/most_current_release I have chmodded the deployer directory recursively to 777 /opt/nginx permissions: rwxr-xr-x /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2 permissions: rwxrwsrwx My nginx config file has gone through just short of eternity variations, but currently looks like this: ================================================================================== worker_processes 1; events { worker_connections 1024; } http { passenger_root /usr/local/rvm/gems/ree-1.8.7-2010.02/gems/passenger-3.0.2; passenger_ruby /usr/local/rvm/bin/passenger_ruby; include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { # listen *:80; server_name mysite.com www.mysite.com; root /home/deployer/webapps/mysite.com/public/current; passenger_enabled on; passenger_friendly_error_pages on; access_log logs/mysite.com/server.log; error_log logs/mysite.com/error.log info; error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } } ================================================================================== I bounce nginx, hit the site, and boom. 403, and logs say directory index of /home/deployer... is forbidden As others with a similar problem have said, you can drop an index.html into the public/releases/current_release and it will render. But rails no worky. That's basically it. At this point I have just about completely exhausted every possible solution attempt I can think of. I am a programmer and definitely not a sysadmin, so I am 99% sure this has something to do with permissions that I have hosed, but for the life of me I just can't figure out where. If anyone can help I would really really appreciate it. If there's any specific permission things you want me to check (ie groups/permissions), can you please include the commands to do so as well. Hopefully this will help others in the future who read this post. Let me know if there is any other information I can provide, and thanks in advance!!!

  Read the article

• How to reinstall bootloader after migration to SSD

  - by hijarian

  I must say, it was difficult to name this question. Basically, I need to properly reinstall the bootloader on my system, because I already have the working system disks for my OSes. The long story is this: I had the large slow HDD with Windows7 & Debian Wheezy dual-boot on it, perfectly bootable. Then, I ordered the SSD drive and prepared my system partitions to fit onto the much smaller SSD. I wanted the following schema: 128 GB Windows 24 GB / on Debian 86 GB /home on Debian Strange size for /home because there's no such thing as true 256GB disk drive. So, I've prepared such a partitions on my initial HDD and installed the new SSD and then I loaded the GParted live USB (can't remember now how it was really named), and then just copypasted the partitions from HDD to SSD. So, now I have the following partitions across the physical disks: SSD 128 GB copy of original Windows partition 24 GB copy of presumably Debian / 86 GB copy of presumably Debian /home HDD 128 GB Windows 24 GB / on Debian 86 GB /home on Debian ... several other partitions with non-system data ... And the behavior of the system right after the Ctrl+C, Ctrl+V in GParted was as follows: no GRUB, system boots right into the Windows on HDD. In BIOS settings are to boot from SSD first. I managed to create the Debian Testing installation USB and loaded it into the rescue mode, found that it identified my SSD as /dev/sda and installed the GRUB to the /dev/sda. Now my system loads the GRUB which lists both Windows and Debian. From HDD. So, I am now back into initial position. Please, how I should set up the GRUB so it'll load the OSes correctly from SSD? Should I fire up my Debian, fiddle with the GRUB's config and reinstall it again to the same place (at SSD)?

  Read the article

• Logging won't stop on log file after renaming/moving it.... how do I stop it?

  - by Jakobud

  Just discovered that logrotate is not rotating our firewall log. So its up to 12g in size. I need to split up the file into smaller chunks and start manually rotating them so I can get things back on track. However before I start splitting the firewall up, I need to stop the firewall from logging to the current firewall log file and force it to start logging to a new empty file. This way I'm not trying to split up or rotate a log file that is still constantly growing. I tried to simply do this: mv firewall firewall.old touch firewall I expected to see the new empty firewall file to start growing in size, but no... the firewall.old is still be logged to. Then I tried to start/stop iptables. No change. firewall.old is still the log file. I tried to move it to another directory. That didn't help. I tried to stop iptables, then change the filename and create a new firewall file and then start iptables again, but no change. How do I stop the logging on this file and force it to start logging on a new file?

  Read the article

• Windows File Access Denied

  - by Tom

  I seem to have a general problem with "access denied on Windows". It manifests itself every time if e.g: My bat file calls a compiler creates a file on disk My bat file renames a file But I also have files downloaded (FireFox) to Windows desktop where Windows is giving me "access denied" if I try delete the file. Tried disable AVG + make exception in AVG resident shield (I have tried checking with Task Manager + Winternals process explorer that it is not process running still running that should cause the locks.) Windows 7. My user account is an administrator. All files are created by same user account. The problem is recent, but some things I first noticed yesterday (when I started calling .bat files again which I have used for many years) I have tried: Starting e.g. Windows Explorer with "run as administrator", but that makes no difference right-click - properties - security and changes permissions/ownership (I also get "access denied" when trying this so this does not help) Here is a ascreenshot if I try change security of a "locked" file. (The problem here is the locking occurs continously every time the file is created) ! If I click on, it states I am not the owner? Which baffles me as I just created it. (Yes, through a .bat file calling executables that create the file. But all running under my administrator user account. Interestingly after having this dialog open, the file somehow sometimes suddenly seem to allow me delete it)

  Read the article

• Creating multiple SFTP users for one account

  - by Tom Marthenal

  I'm in the process of migrating an aging shared-hosting system to more modern technologies. Right now, plain old insecure FTP is the only way for customers to access their files. I plan on replacing this with SFTP, but I need a way to create multiple SFTP users that correspond to one UNIX account. A customer has one account on the machine (e.g. customer) with a home directory like /home/customer/. Our clients are used to being able to create an arbitrary number of FTP accounts for their domains (to give out to different people). We need the same capability with SFTP. My first thought is to use SSH keys and just add each new "user" to authorized_keys, but this is confusing for our customers, many of whom are not technically-inclined and would prefer to stick with passwords. SSH is not an issue, only SFTP is available. How can we create multiple SFTP accounts (customer, customer_developer1, customer_developer2, etc.) that all function as equivalents and don't interfere with file permissions (ideally, all files should retain customer as their owner)? My initial thought was some kind of PAM module, but I don't have a clear idea of how to accomplish this within our constraints. We are open to using an alternative SSH daemon if OpenSSH isn't suitable for our situation; again, it needs to support only SFTP and not SSH. Currently our SSH configuration has this appended to it in order to jail the users in their own directories: # all customers have group 'customer' Match group customer ChrootDirectory /home/%u # jail in home directories AllowTcpForwarding no X11Forwarding no ForceCommand internal-sftp # force SFTP PasswordAuthentication yes # for non-customer accounts we use keys instead Our servers are running Ubuntu 12.04 LTS.

  Read the article

• SQuirreL Client: Opening up a table in a separate tab

  - by Dalin Seivewright

  I've switched to SQuirrel Client to view an Oracle database with a variety of tables. At any given time, I need to look at the contents of several related tables at the same time. The problem is that, at least by default, SQuirrel Client does not open up multiple tables at a time. When you click on a different Table object, the main view is refreshed with newly selected table data. Oracle's SQLDeveloper (which I am trying to move away from) did this by default if I recall, but there was an option to "freeze" panes. Does a similar option exist in SQuirrel Client? I do not require the ability to view the contents of two different tables on the same screen (i.e. a split view) but I would like the ability to have tabs for each table so I can quickly switch between each table view rather then having to find the table in the table list over and over again. Note: I am using this in a professional capacity but if it does not "belong" here then I suppose it could be moved to superuser.

  Read the article

• Struggling with proper way to setup Permissions on Linux/Apache Web Server

  - by Dr. DOT

  Your expert experience and assistance is great, greatly appreciated here. I have been running a LAMP server for a long time, yet I still struggle with the best way to set file & directory permissions for FTP and WWW protocol activity. My Control panel is WHM/cPanel (not that it makes a difference), and out-of-the box: files are owned by the user account setup in WHM (eg, "abc") files have a group setting of "abc" as well file permissions are created with 644 directories are owned by "abc" directories have a group setting of "abc" directories permissions are created with 0755 Again, these are the default permission settings. Now everything is fine with FTP activity, but please advise me if any of these file/directory settings create issues, especially with security. Here's where my struggle comes into play. I have PHP apps that allow a visitor to create, edit, rename, delete, etc. sub-directories and files in certain selected directories. PHP runs as "nobody" on my server. So in order to get my PHP/Web apps to work, I have had to: chown nobody * chgrp nobody * chmod 0777 * to everything in these certain & selected sub-directories. I know this is probably a huge security whole (so don't ask me for any links :) but how should I set all the permissions to allow my FTP user to do his thing while allowing the PHP apps to do their thing will also "minimizing" any security risks and exposures? I know that big CMS systems like Drupal, Joomla, WordPress and so on, handle this. Thanks ahead of time for reading through this and offering your expert advice!

  Read the article

• Comparing 2 (or 3 Files If Possible) "Line By Line"

  - by PythEch

  I want to find out the differences of 2 (or 3 files if possible) line by line. Diff utils can do this, however it gives inaccurate results. Because, 2 files have exact number of lines which is "134". But diff gives me "Added Lines" and "Removed Lines". However this is wrong, they have exact the same number of lines, there is no added or removed lines. The text files which I want to find differences of them, have only numbers written, maybe that's why that algortihm fails. I couldn't find any option to prevent that, however I may be wrong, I mean there should be an option for that, but again, I couldn't find. This is what I get (5am.txt vs 6am.txt, there is a huge problem): This is what I want (6am.txt vs 7am.txt, still has problems): But, first the first image still has this problem, at the last lines. Edit: After I figured out that there is no utility to do this, I handled myself. I almost did the same thing as what RedGrittyBrick have done. This script imitates diff utility so I (or you) can use it with diff2html. To use it with diff2html, just change line diff_stdout = os.popen("diff %s" % string.join(argv[1:]), "r") to diff_stdout = os.popen("script.py %s" % string.join(argv[1:]), "r") and name this script whatever you want: import sys f1=open(sys.argv[1],"r") f1_read=f1.readlines() f1.close() f2=open(sys.argv[2],"r") f2_read=f2.readlines() f2.close() changed={} first_c = "" for n in range(len(f1_read)): if f1_read[n]!=f2_read[n]: if first_c == "": first_c=n+1 changed[first_c]=n+1 else: first_c="" #Let's imitate diff-utils... for (x, y) in changed.items(): print "%d,%dc%d,%d" % (x,y,x,y) for i in range(x,y+1): sys.stdout.write("< %s" % f1_read[i-1]) print "---" for i in range(x,y+1): sys.stdout.write("> %s" % f2_read[i-1]) Final results:

  Read the article

• Failed to re-publish a page - Tridion 2011 SP1

  - by Wilson Yu

  We are getting some strange error when re-publishing the same page. The page was published successfully the first time and we can see the page from presentation server. It failed with the following error (see below) when we tried to publish it again (no change to page). The page ran OK within template builder and we got the correct html output, it failed in the last committing deployment step (Prepare Transport, Transporting, Preparing Deployment and Deploying are all successful). Once it fails to publish the second time, it always fails to publish, and we can't un-publish it either. Also when we make a copy of the failed page and create a new page, we can publish the new page first time, the new page then fails to publush the second time with the same error. Does anyone know what would cause this error? any help would be greatly appreciated. Here is the error msg: Committing Deployment Failed Phase: Deployment Prepare Commit Phase failed, Unable to prepare transaction: tcm:0-4210-66560, For input string: "", For input string: "", Unable to prepare transaction: tcm:0-4210-66560, For input string: "", For input string: ""

  Read the article

• Keytool and SSL Apache config

  - by Safari

  I have a question about SSL certificate... I have generate a certificate using this keytool command.. keytool -genkey -alias myalias -keyalg RSA -keysize 2048 and I used this command to export the certificate keytool -export -alias myalias -file certificate.crt So, I have a file .crt Now I would to configure my Apache ssl module. I need to use keytool...At the moment I can't to use Openssl How can I configure the module if I have only this certificate.crt file? I see these sections in my ssl.conf # Server Certificate: # Point SSLCertificateFile at a PEM encoded certificate. If # the certificate is encrypted, then you will be prompted for a # pass phrase. Note that a kill -HUP will prompt again. A new # certificate can be generated using the genkey(1) command. #SSLCertificateFile /etc/pki/tls/certs/localhost.crt # Server Private Key: # If the key is not combined with the certificate, use this # directive to point at the key file. Keep in mind that if # you've both a RSA and a DSA private key you can configure # both in parallel (to also allow the use of DSA ciphers, etc.) #SSLCertificateKeyFile /etc/pki/tls/private/localhost.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt How can I configure the correct section?

  Read the article

• Ubuntu purple splash screen with blinking pixels?

  - by joxnas

  I had ubuntu 9.10 I upgraded to 10.04 after solving some problems (freeze at boot). Since then, I don't have the ubuntu's logo showing up when I boot, but a purple screen with some blinking pixels. I didn't care much about it... but today my computer took too long at that screen (normally it was just 1/4 second, but today it was like a minute..). And it happened like 4 or 5 times in a row (Only at the 5th time I realised that it was not freezing up, but it simply would took more time) After a reboot, it is again 1/4 second of purple screen but I don't want this problem to return.. so I want to get rid of the purple screen (I think it is an indicator of the problem) Well, I already installed the graphic drivers (going to system admnistration hardware drivers). But it didn't solve anything. (I don't know if it is even related) I searched in google, found something old (2006) and I think it maybe has some relation with my problems .. http://ubuntuforums.org/archive/index.php/t-294692.html But couldn't understand the conversation (i'm a linux novice) Sorry for my horrible english.. I would appreciate any help! My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core 2 Duo

  Read the article

• IPTables Rule for Google Apps SMTP

  - by XpresServers

  I am trying to add iptables rule to allow traffic on ports 465 & 587 to google apps smtp servers. But I got not luck. My WHMCS installation works fine with google apps when I turn off iptables but iptables turn on itself again and email stop working. Please add rules to allow traffic from port 465 and 587. Following are my IPTables rules grabbed from /etc/sysconfig/iptables # Generated by iptables-save v1.3.5 on Fri Oct 5 01:33:52 2012 *filter :INPUT ACCEPT [2191:434537] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [2390:987151] :acctboth - [0:0] -A INPUT -j acctboth -A OUTPUT -p tcp -m multiport --dports 25,465,587 -m owner --gid-owner mailman -j ACCEPT -A OUTPUT -p tcp -m multiport --dports 25,465,587 -m owner --gid-owner mail -j ACCEPT -A OUTPUT -d 127.0.0.1 -p tcp -m multiport --dports 25,465,587 -m owner --uid-owner cpanel -j ACCEPT -A OUTPUT -p tcp -m multiport --dports 25,465,587 -m owner --uid-owner root -j ACCEPT -A OUTPUT -j acctboth -A OUTPUT -o eth0 -p tcp -m tcp --sport 587 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 465 -m state --state ESTABLISHED -j ACCEPT <<IN THIS SPACE RULES ARE RELATED TO SPECIFIC IPS ONLY>> -A acctboth -i ! lo COMMIT # Completed on Fri Oct 5 01:33:52 2012 # Generated by iptables-save v1.3.5 on Fri Oct 5 01:33:52 2012 *nat :PREROUTING ACCEPT [196:12398] :POSTROUTING ACCEPT [191:15070] :OUTPUT ACCEPT [190:15010] -A OUTPUT -p tcp -m multiport --dports 25,465,587 -m owner --gid-owner mailman -j RETURN -A OUTPUT -p tcp -m multiport --dports 25,465,587 -m owner --gid-owner mail -j RETURN -A OUTPUT -d 127.0.0.1 -p tcp -m multiport --dports 25,465,587 -m owner --uid-owner cpanel -j RETURN -A OUTPUT -p tcp -m multiport --dports 25,465,587 -m owner --uid-owner root -j RETURN -A OUTPUT -p tcp -m multiport --dports 25,465,587 -j REDIRECT COMMIT # Completed on Fri Oct 5 01:33:52 2012 Thanks Hassan

  Read the article

• virtual machines, dual booting and data disks on SSD

  - by stevemarvell

  This is in planning, so if I've got the strategy wrong, please let me know. There are multiple questions here, but I think they all degenerate to the same answers. The hardware is a laptop with a single SSD. I'm trying to not lose the performance of the SSD. I plan a native dual booting Windows (plus cygwin) and Linux machine which is my BYOD and represents the development environment. I keep the codebase on a shared partition (though sometimes this is an external thunderbolt SSD) which can be natively "mounted" by whichever OS is in operation. I boot into one or the other environments depending on the task in hand. Sometime I have to develop with windows tools, but generally, Linux is my preferred development environment. It would be ideal if I could VM the other OS and run either in either. I'm going to assume, because I've not found a sensible VM based solution, that I have get samba involved to share the code partition between VMs. Is this going to blow my SSD performance in the VM? The client also supplies me with a VM for the target environment, usually linux. This is not often suited to development and is used for testing only. I normally keep two copies of this, one as a sandbox and one which I deploy to using the client's preferred method. I keep these VM snapshots on the shared partition. The latter is interacted with over the network and so has no disk sharing requirements. However, it would be useful for the sandbox to be able to "mount" the code base from the natively running OS. Is this samba or nfs again, depending on the native OS? Am I missing a trick which allows this to all work smoothly with all four environments running at once without loosing the SSD performance?

  Read the article

• Java: very slow tomcat and too big war file

  - by NaN

  I created some sort of RESTful API backend for a mobile app. It's written completely in Java using Jersey as Framework. At the moment no database is used, it's all in the memory, but this is no problem so far (it's only for prototyping purposes). I ordered the smallest package from digital ocean and installed tomcat7. All in all tomcat works, but I have three major problems: 1) It takes a long time until tomcat deploys the app: I deploy it per tomcat manager and it takes about 2 minutes unit the site works (excl. war upload time). 2) The war files are quite big (16MB): I don't know why they are so big. There are no database dependencies and most logic is written in plain java. Okay, we are using jersey, but 16MB are a lot for the logic of a small webservice. 3) I have to restart tomcat all 3 days or so. It looks like a memory leak or something similar. If the app runs for a few days the response time is quite high and the server seems to be frozen. It works again, if I restart tomcat per ssh. You can find my mvn pom file right here. Do you have some tips? Are there good tomcat alternatives?

  Read the article

• Cannot Start Passenger 3.0.18 Using Mountain Lion (OS X Server) and RVM

  - by LightBe Corp

  I recently did a clean install of Mountain Lion on my Mac Mini Server. I installed version 3.0.18 using a gem according to the directions on http://www.phusionpassenger.com with no errors that I could see. rvmsudo gem install passenger-enterprise-server-3.0.18.gem rvmsudo passenger-install-apache2-module Here are my entries in /etc/apache2/httpd.conf with my username masked: LoadModule passenger_module /Users/username/.rvm/gems/ruby-1.9.3-p327/gems/passenger-enterprise-server-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /Users/username/.rvm/gems/ruby-1.9.3-p327/gems/passenger-enterprise-server-3.0.18 PassengerRuby /Users/username/.rvm/wrappers/ruby-1.9.3-p327/ruby I uncommented out the following statement: Include /private/etc/apache2/extra/httpd-vhosts.conf Here is a sample virtual host entry. I have three of them in the file. <VirtualHost *:80> ServerName www.mydomain.com ServerAlias mydomain.com PassengerAppRoot /Users/username/Sites/myfolder/ DocumentRoot /Users/username/Sites/myfolder/public <Directory /Users/username/Sites/myfolder/public> Allow from all AllowOverride all Options -MultiViews </Directory> </VirtualHost> I have restarted Apache several times. Here is information from my server: [~]$ ps -ef | grep Passenger 501 18804 303 0 12:39PM ttys000 0:00.00 grep Passenger [~]$ rvmsudo passenger-status Password: **ERROR: Phusion Passenger doesn't seem to be running.** [~]$ rvmsudo passenger-config --version 3.0.18 I have tried doing online searches on this. I was surprised that there was not all that much on this specific error even though from my understanding Passenger has been around for a few years. I have posted this issue on the Phusion Passenger Google Groups but have not heard anything. Any help would be appreciated, the sooner the better LOL. Seriously I need to have one of my three websites up by tomorrow evening. This is the only issue stopping that from happening. Thanks again.

  Read the article

• configuring lighttpd for large downloads

  - by ahmedre

  i run a web site that hosts pages that are just general scripts (php, etc) and mp3 downloads (some of which are fairly large - up to 200mb). i am running lighttpd on the servers on linux (ubuntu 64). everything is fine, but under high load, the server is not accessible (or very slow - even sshing in takes a while), and i am guessing this is due to a huge number of mp3 downloads at that time. consequently, dns sees the server as down and redirects all the traffic to the other servers, and after a while, it comes back up and things work again. so what's the best way to fix this? ideally, i want the server to continue running (and the web pages - php etc - to always work, but downloads don't always have to work). should i just have 2 web servers running (one for the downloads and one for the php pages), or is it perhaps something i can fix in my lighttpd configuration? here are the snippets from my configuration: server.max-worker = 4 server.max-fds = 2048 server.max-keep-alive-requests = 4 server.max-keep-alive-idle = 4 server.stat-cache-engine = "fam" fastcgi.server = ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 1, "idle-timeout" => 20, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "64", "PHP_FCGI_MAX_REQUESTS" => "1000" ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" )) ) # normal php site $HTTP["host"] =~ "bar.com" { server.document-root = "/usr/local/www/sites/bar.com/" accesslog.filename = "|/usr/sbin/cronolog /var/log/lighttpd/%m/%d/%H/bar.log" } # download site $HTTP["host"] =~ "(download|stream).foo.com" { server.document-root = "/home/audio/" dir-listing.activate = "enable" dir-listing.hide-dotfiles = "enable" evasive.max-conns-per-ip = 1 evasive.silent = "enable" # connection.kbytes-per-second = 256 accesslog.filename = "|/usr/sbin/cronolog /var/log/lighttpd/%m/%d/%H/download.log" }

  Read the article

• Windows VirtualBox failed to attach USB device to Linux Guest

  - by joltmode

  I have Windows 7 64bit Host system, and I am using VirtualBox 4.1.18 (r78361). I have an Arch Linux Guest OS. I have installed VirtualBox Extension Pack (to enable USB2 support) and added my USB device filter to VM. I have also installed the Guest Additions provided by Arch: virtualbox-archlinux-additions (but I have no idea whether it's actually needed for my environment). I can see my USB device from VirtualBox Devices menu. Whenever I am trying to access it, I end up with: Failed to attach the USB device Kingston DT 100 G2 [0100] to the virtual machine Archlinux. USB device 'Kingston DT 100 G2' with UUID {a836ec33-0f41-4ca7-a31d-09cceaf5d173} is busy with a previous request. Please try again later. Details ? Result Code:    E_INVALIDARG (0x80070057) Component:      HostUSBDevice Interface:      IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee:         IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} From what I have googled, most guides shows how to solve this the other way around - Linux Host to Windows Guest. How do I resolve this? Update I have tried to Eject (virtually, not physically) the device from my Windows Host system and then try to access the Device from Guest. Same error.

  Read the article

• SVN hangs on commit - any suggestions for troubleshooting?

  - by Richard Beier

  We're having a problem with SVN... Subversion clients such as TortoiseSVN hang when we commit any more than a few files at a time to our server. Everything appears to actually be committed successfully to the repository; but the client hangs after all the data has been transmitted. We're using version 1.4.4 of the SVN server. We use the svn:// protocol rather than http to connect. We've reproduced this problem with several clients: TortoiseSVN (1.6.10), AnkhSVN (2.1), and the Silk command-line client (1.6.12). This is happening for everyone on the team, though some people seem to be more affected than others. If someone commits only a few files, it often works; but with more than half a dozen files, it usually hangs. Does anyone have troubleshooting suggestions? This has been happening sporadically for a while, but it's become pretty consistent lately. We've been working around the issue by killing the hung SVN client, doing "svn cleanup", and then doing "svn up"; but sometimes that causes tree conflicts. Another workaround is to blow away the workspace and check it out again after every commit; but of course that's pretty annoying. Are there any diagnostics that could help us troubleshoot this? We're considering upgrading to SVN 1.6 server, and installing the server on a new machine; but we're wondering if there's an easier solution. Thanks for your help, Richard

  Read the article

• How do I stop linux from trying to mount android phone as usb storage?

  - by user1160711

  When I plug in my Motorola Triumph to my fedora 17 linux box USB port, I get an endless series of errors on the linux box as it desperately attempts to mount the phone as a USB drive. Stuff like this: Jun 23 10:26:00 zooty kernel: [528926.714884] end_request: critical target error, dev sdg, sector 4 Jun 23 10:26:00 zooty kernel: [528926.715865] sd 16:0:0:1: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 23 10:26:00 zooty kernel: [528926.715869] sd 16:0:0:1: [sdg] Sense Key : Illegal Request [current] Jun 23 10:26:00 zooty kernel: [528926.715872] sd 16:0:0:1: [sdg] Add. Sense: Invalid field in cdb Jun 23 10:26:00 zooty kernel: [528926.715876] sd 16:0:0:1: [sdg] CDB: Read(10): 28 20 00 00 00 00 00 00 04 00 If I go ahead and tell the phone to allow linux to mount the USB storage, the messages stop, and I get a mounted drive, but if all I want to do is use the debug bridge, my log on linux will continue to fill with this junk. Is there some udev magic I can do to make the system ignore this particular device as far as usb storage goes? I just noticed that if I tell the phone to enable USB storage, let linux recognize the new disk, then tell the phone to disable USB storage again, I get one additional log message about capacity changing to zero, but the endless spew of messages stops, so I guess one work around is to enable and disable USB right away.

  Read the article

• Windows 7 ignores F6/F8 and will not boot

  - by P.Brian.Mackey

  I have a work PC with sophos safeguard encryption on it. Windows failed to start. When I bootup I receive an error saying a recent hardware or software change might be the cause. File: \Boot\BCD Status: 0xc0000098 Info: The windows boot configuration data file does not contain a valid OS entry. This began after the PC forced me to run a system recovery. My machine had powered down improperly (power outage?) and simply would not respond to my keyboard input to cancel the option to scan my system. After the scan "repaired" a boot file, my system crashed. Now it tells me I can insert my windows 7 disk and run recovery. I can't simply do this because of Safeguard. The system recovery can't see my encrypted drive. I tried hitting F2 to manually login to Safeguard and then selected the option to boot from media. The computer prompts me to hit any key to boot from disk...which I do, but once again it is not reading my keyboard input. I can't get F8/F6 to bypass startup files and get me to a command prompt like the old days. If I could get to a command prompt I might could recover the file windows jacked up from its backup location...though I may need to use the windows recovery disk UI to do this..??? In the past I've been able to slap in a PS/2 keyboard when the USB keyboards stop responding like this. I have no PS/2 keyboard available. Anyone have any idea how I can undo the damage windows system recovery has done with safeguard installed?

  Read the article

< Previous Page | 672 673 674 675 676 677 678 679 680 681 682 683  | Next Page >