Search Results

Search found 23309 results on 933 pages for 'bit operations'.

Page 694/933 | < Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701  | Next Page >

• o2cb thinks ocfs2 cluster is still online, and refuses to shut down

  - by Kendall

  I have a handful of OpenSuSE 11.2 servers that utilize OCFS2 volumes. I've noticed that o2cb can't figure out when the OCFS2 cluster is actually mounted. For example, when I try to shutdown o2cb, after stopping OCSF2, o2cb refuses to shutdown because it thinks OCFS2 is still up! After stopping OCFS2 I try to stop o2cb... hamguy:/dev/disk/by-label # /etc/init.d/o2cb stop Stopping O2CB cluster ocfs2: Failed Unable to stop cluster as heartbeat region still active So I check the status... hamguy:/dev/disk/by-label # /etc/init.d/o2cb status Driver for "configfs": Loaded Filesystem "configfs": Mounted Stack glue driver: Loaded Stack plugin "o2cb": Loaded Driver for "ocfs2_dlmfs": Loaded Filesystem "ocfs2_dlmfs": Mounted Checking O2CB cluster ocfs2: Online Heartbeat dead threshold = 31 Network idle timeout: 30000 Network keepalive delay: 2000 Network reconnect delay: 2000 Checking O2CB heartbeat: Active And double check OCFS2... hamguy:/dev/disk/by-label # /etc/init.d/ocfs2 status Configured OCFS2 mountpoints: /u/conf /u/logs /u/backup /u/client /u/data /u/mdata OCFS2 is clearly down, while o2cb clearly thinks otherwise. The versions of OCFS2 and o2cb are... kendall@hamguy:~> rpm -qa |grep ocfs2 ocfs2console-1.4.1-25.6.x86_64 ocfs2-tools-o2cb-1.4.1-25.6.x86_64 ocfs2-tools-1.4.1-25.6.x86_64 kendall@hamguy:~> rpm -qa |grep o2cb ocfs2-tools-o2cb-1.4.1-25.6.x86_64 What causes this, and is there a way around it? If I try to reboot the machine, it will just sit there forever until your physically power cycle it. That obviously is a bit of a problem. Any insight is appreciated, thank you. Kendall

  Read the article

• Setting up a PC for the Kids

  - by Martin Clarke

  I recently finished building a new PC from scratch; and then I decided to treat myself to a new widescreen monitor. I'm left with a bit of a conundrum with what to do with my old box. I'm considering a few options such as a file server, putting Linux on it, putting it elsewhere in the house or giving it to a member of the family and so on. But to be honest, I don't really think it would get much use. I've started thinking about putting together something for my kids. The oldest is coming up on 4 in a couple of months and he's used my PC and Macbook (supervised!) before for playing jigzaw puzzles, babysmash and so forth. He's also uses the computer at his nursery (Kindergarden for North Americans!). So, its got me thinking about setting something up for him (bonus for his brother who is 2). I was wondering what others had done when trying to put together something for their kids? Some points for consideration: Operating System? Software? Anti-virus Internet (probably blocking?) Hardware (I've seen some keyboards designed with kids in mind)

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• ProCurve network expansion

  - by Blue Warrior NFB

  I've hit a bit of a wall with our network scale-out. As it stands right now: We have five ProCurve 2910al switches connected as above, but with 10GbE connections (two CX4, two fiber). This fully populates the central switch above, there will be no more 10GbE Ethernet connections from that device. This group of switches is not stacked (no stack directive). Sometime in the next two or three months I'll need to add a sixth, and I'm not sure how deep of a hole I'm in. Ideally I'd replace the core switch with something more capable and has more 10GbE ports. However, that's a major outage and that requires special scheduling. The two edge switches connected via fiber have dual-port 10GbE cards in them, so I could physically put another switch on the far end of one of those. I don't know how much of a good or bad idea that would be though. Is that too many segments between end-points? Some config-excerpts: Running configuration: ; J9147A Configuration Editor; Created on release #W.14.49 hostname "REDACTED-SW01" time timezone 120 module 1 type J9147A module 2 type J9008A module 3 type J9149A no stack trunk B1 Trk3 Trunk trunk B2 Trk4 Trunk trunk A1 Trk11 Trunk trunk A2 Trk12 Trunk vlan 15 name "VM-MGMT" untagged Trk2,Trk5,Trk7 ip helper-address 10.1.10.4 ip address 10.1.11.1 255.255.255.0 tagged 37-40,Trk3-Trk4,Trk11-Trk12 jumbo ip proxy-arp exit

  Read the article

• Bash mine script, please

  - by HomelyPoet

  The script, in and of its self, is fairly self-explanatory. Use if You so desire; any and all criticism wouldst be appreciated, as wouldst any suggestions for improvement. First iteration was writ upon OS X 10.5.8 Leopard, current iteration was run upon OS X 10.6.4 Snow Leopard with Safari 5.0.2 (6533.18.5). Also, any illumination as to why the first line ' if [ -f ] ' works, but ' if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] ' generates an error? [yes, I am a bit of a Noob] Code: #! /bin/bash # SafariClear0.0.6 if [ -f ] then cat /dev/null > ~/Library/Safari/LocalStorage/*.localstorage rm -f ~/Library/Safari/LocalStorage/*.localstorage fi if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] then echo "Oy vey!" fi cd ~/Library/Safari/ cat /dev/null > WebpageIcons.db cat /dev/null > TopSites.plist cat /dev/null > LocationPermissions.plist cat /dev/null > LastSession.plist cat /dev/null > History.plist echo "Clear" exit

  Read the article

• Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart"

  - by Senthil

  Problem: When I switch on my PC, after BIOS POST, a cursor is blinking for about 5 seconds and then I am getting this error message: A disk read error occurred. Press Ctrl + Alt + Del to restart. I am able to go into BIOS. But Windows loader doesn't even start. This message is shown after my motherboard logo comes and goes. Symptoms: I DID notice my system freezing for minutes at a time for past two days. Also, in the past two days, it stopped half way through the Window booting process. I had to do hard reset couple of times to get it working. But since today morning, I only get this error message. Configuration: Operating System: Windows 7 Ultimate 32-bit only. Hard disk: 1 Physical Disk - 80GB SATA Partitions: Two (2) - C: and D: File System: NTFS No drive encryption or compression is turned on. After I searched on the net, I have found people mentioning these possible causes: Hard Disk is physically failing Corrupt MBR Bad Sector I am planning to buy a new hard disk, install Windows on it and continue. But I need data from the old hard disk. The data I want is in D: drive, outside any Windows user folder, is not encrypted or compressed or protected in anyway. I think if someone/something can get the disk working again and knows NTFS, the data can be hopefully read. What steps should I follow to recover files from the defective disk? Update: I bought a new disk, installed windows on it and added the defective one as a slave. Then I was able to read the data from the defective hard disk. Though chkdsk found lots of errors, the files I wanted were not affected and I got them back :) I am not using that hard disk anymore though it seems to be working at the moment.

  Read the article

• Passenger not booting Rails App

  - by firecall

  I'm at the end of ability, so time to ask for help. My hosting company are moving me to a new server. I've got my own VPS. It's a fresh CentOS 5 install with Plesk 9.5.2 Essentially Passenger just doesnt seem to be booting the Rails app. It's like it doesnt see it's a Rails app to be booted. I've got Rails 3.0 install with Ruby 1.9.2 built from source. I can run Bundle Install and that works. I've currently got Passenger 3 RC1 installed as per here, but have tried v2 as well. My conf/vhost.conf file looks like this: DocumentRoot /var/www/vhosts/foosite.com.au/httpdocs/public/ RackEnv development #Options Indexes I've got a /etc/httpd/conf.d/passenger.conf file which looks like this: LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4 PassengerRuby /usr/local/bin/ruby PassengerLogLevel 2 and all I get is a 403 forbidden or the directory listing if I enable Indexes. I dont know what else to do! Yikes. There's nothing in the Apache error log that I can see. The new server admin isnt much help as I think he's a bit junior and says he doesnt know about Rails... sigh :/ I'm a programmer and server admin isnt my bag :(

  Read the article

• I keep losing wireless connection

  - by posfan12

  I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

  Read the article

• Ubuntu 11.10 Virtual-box Unity 3D not working

  - by naveen

  After struggling for four hours, I still cannot get Unity 3D of Gnome 3 to work on my VirtualBox - I have been pouring through Internet and forum posts but to no avail. Here's what I've done so far: VirtualBox 4.1.4r74921 on Windows 7 Installed Ubuntu Desktop 11.10 ( 32 bit ) Enabled 3D acceleration Allocated 1.5GB of RAM Allocated 50MB video memory (hope this is not the culprit) Installed Guest edition 4.1.4 Did apt-get update and apt-get upgrade Booted back in to Ubuntu - falls back to Unity 2D Shared folder, mouse integration all works, so guest edition is properly installed Tried the command and below is the output /usr/lib/nux/unity_support_test –p OpenGL vendor string: Mesa Project OpenGL renderer string: Software Rasterizer OpenGL version string: 2.1 Mesa 7.11 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I am trying to find what the "no" means but cannot find any good answers. Inter Core i5 processor 4GB of RAM on the host Display adapter: NVIDIA GeForce 8400GS Is anyone else facing the same problem? If so, can you point me to a solution or any reference where I can find a solution?

  Read the article

• How do I switch java versions to an earlier version in Fedora 17?

  - by JHutson456

  I just installed Fedora 17. I'm setting up the Android Build Environment and need Java. I downloaded and installed jdk-6u32-linux-amd64.rpm I ran java -version and it spit out the correct version. Well a day or two later i tried my first compile in Fedora 17 and it complained about java and failed. I ran java -version again and low and behold it spits out $ java -version java version "1.7.0_03-icedtea" OpenJDK Runtime Environment (fedora-2.1.fc17.7-x86_64) OpenJDK 64-Bit Server VM (build 22.0-b10, mixed mode) I'm stumped. I mean, i've run the update/upgrade commands since i installed but i didn't think that updated full version revisions... So, I ran alternatives --config java and that only gave me the java 1.7 version. While digging around more I discovered that the recommended version of Java for the build environment is jdk-6u27-linux-x64-rpm.bin so I downloaded that from here: Oracle Download When I ran: sudo sh jdk-6u27-linux-x64-rpm.bin it returned: Unpacking... Checksumming... Extracting... UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]). inflating: jdk-6u27-linux-amd64.rpm inflating: sun-javadb-common-10.6.2-1.1.i386.rpm inflating: sun-javadb-core-10.6.2-1.1.i386.rpm inflating: sun-javadb-client-10.6.2-1.1.i386.rpm inflating: sun-javadb-demo-10.6.2-1.1.i386.rpm inflating: sun-javadb-docs-10.6.2-1.1.i386.rpm inflating: sun-javadb-javadoc-10.6.2-1.1.i386.rpm Preparing... ########################################### [100%] package jdk-2000:1.6.0_32-fcs.x86_64 (which is newer than jdk-2000:1.6.0_27-fcs.x86_64) is already installed Done. so now I'm confused. I ran: alternatives --config java again but it's still only returning 1.7 so I don't know what to do.I want to end up with 6u27 as the installed and functional version of the JDK. Thank you.

  Read the article

• Apache2 MPM-prefork MPM-worker multiple instances on same Ubuntu host machine possible?

  - by user60985

  I have a live Apache2/MPM-Worker instance running Django. I want to also run an Apache2/MPM-prefork instance to run some Drupal6 applications on the same host machine and utilize a vast selection of PHP modules that run on the prefork model. I plan to use my MPM-worker instance to reverse proxy to the Apache2-prefork instance for URLS starting with myhost.com/drupal6/. It seems theoretically doable/configurable by having the second Apache2-prefork instance configured to listen on an internal port, say 127.0.0.1:8080 and having my current Apache2-worker configured to proxy pass and reverse pass to it for the 'drupal6' URLs. However, how do I compile or install the apache2-prefork version so it has a different executable name than /usr/sbin/apache2, for example /usr/sbin/apache2p, and so apache2ctl has a different name, say apache2pctl, and that apache2pctl invokes the /usr/sbin/apache2p instead of /usr/sbin/apache2... and so on down the line (eg /etc/apache2p) so I can start and restart my two instances independently? As I understand it, no one executable of 'apache2' can be compiled with both the MPM-prefork and MPM-worker modules, so it seems I need two separate versions of the apache2 MPM flavors. But then I need to invoke and control them by separate names, I assume. I looked at the configuration options for apache2 and I am a bit queasy about compiling a second apache2 version with prefork because I am not sure I can set all the options so that none of my current apache2 files is overwritten. Is there a way? Is there a standard solution to separately installing and controlling prefork and worker apache2 executables on the same machine without them stepping on each other during installation or operation?

  Read the article

• Openfire on EC2 with Jingle

  - by Bjorn Roche

  I would like to run Openfire (or another XMPP server) on EC2. At the moment this is just for testing, so easy setup and configuration are important, as is low cost. At some point, however, if things go well, it will be important to scale this. Ideally, it would be nice to not have to switch software when the scaling happens, but if a switch needs to happen later it certainly can. My requirements are: basic XMPP services, including muc and pubsub. Logins controlled from an external API. Preferably, when a user attempts to connect, the XMPP server checks with the api to see if their username and password are correct, but I can also have the API keep the XMPP server up to date on new users, deleted users, pasword changes and so on. I see Openfire has a "user service" API. Not ideal, but it looks workable. Jingle, including relay and STUN. It's not at all clear to me if the Jingle Nodes plugin takes care of this. I'm a bit confused about what's required to set this up, and I'd rather know in advance than be confused along the way :). eg It seems like STUN servers require more than one IP address. Can Openfire do all this for me, including stun and media relay on a single machine? Is this hard to configure on EC2 with Openfire? What are the basic steps? Would this be easier with something else like, say Tigase? What about database? Should I use amazon's database service, or run a db on the same machine? Would the server be compatible with a service like http://www.siteuptime.com/ Thanks!

  Read the article

• Backup, Migrate or Clone Failing CentOS 4 (LVM)

  - by Hegelworm

  Hello there, I've been running a BlueQuartz CentOS 4 system (Nuonce.net distro) for a few years now and although the hard drive (Deskstar) has always been a bit noisy, on a few recent occasions I've heard it having trouble spinning up. Basically, I want to clone this drive to a similar sized one (80 Gig). I've spent many hours reading upon dd, dd_rescue, rsync, clonezilla and LVM mirroring yet the sheer number of options and nightmarish accounts has left me frozen - unable to make an informed decision as to how to start. I've made a few attempts. dd failed after about 2 hours, as, although the drives appeared to be identical on the surface (ATA Seagate Barracudas, Thai not Chinese), the destination drive is slightly smaller. My most recent attempt involved using a Debian CD to format the new drive and then rsync-ing everything over and editing the new drive's grub and fstab to reflect the changes. No joy here either as I hadn't chosen LVM when partitioning the destination drive and it wouldn't boot. As you can probably tell, I'm out of my depth here and a panic-invoking mixture of caution and frustration has prompted me to sign up here. The server itself, although not strictly a production environment, has a very specific installation of Festival, LAME and ffMpeg and provides the back-end for a Text-to-Speech jQuery plugin that I've built over the last 2 years. I'm also planning to rebuild the whole TTS system on Debian as the existing CentOS system still has PHP4 etc. For now though, I'd really like to just shift everything over to a new drive. As this is my first post, please feel free to lay any house rules on me that I might've overlooked; I've been hovering around StackOverflow for a while now but have only just signed up. Many thanks.

  Read the article

• Logitech webcam device only recognised by one software, without drivers

  - by Ben Franchuk

  A couple weeks ago I purchased a Logitech webcam at a garage sale; It did not come with any driver DVDs or anything like that. I plugged it in, turned on my computer, and continued work as usual. I did not at the time (and still have not) gotten any drivers for the device. Recently, though, I started up an audio software named as Cubase, only to find that it was picking up audio reads off of... something. I checked my sound card, and everything else plugged into my computer, but couldn't find where in the world this audio was being picked up from. There were no microphones listed in the device managers, and no "unknown devices" or whatever. Everything seemed as it always was. Running out of ideas, i blew an air-horn directly into the general area of the webcam, located directly in front of me. Sure enough, the audio peaked, indicating that the microphone was definitely in the webcam and that Cubase was somehow picking up this audio, even without drivers. The software lists the device as a "Universal USB Microphone". Adobe Audition, Soundbooth, and other audio applications cannot find the device either. Why is it that this one software (Cubase) can use this device without a driver, while every other piece of software on the computer can't? Not even the operating system can recognize it. Windows 7 Professional x64 bit

  Read the article

• Limiting interface bandwidth with tc under Linux

  - by Matt

  I have a linux router which has a 10GBe interface on the outside and bonded Gigabit ethernet interfaces on the inside. We have currently budget for 2GBit/s. If we exceed that rate by more than 5% average for a month then we'll be charged for the whole 10Gbit/s capacity. Quite a step up in dollar terms. So, I want to limit this to 2GBit/s on 10GBe interface. TBF filter might be ideal, but this comment is of concern. On all platforms except for Alpha, it is able to shape up to 1mbit/s of normal traffic with ideal minimal burstiness, sending out data exactly at the configured rates. Should I be using TBF or some other filter to apply this rate to the interface and how would I do it. I don't understand the example given here: Traffic Control HOWTO In particular "Example 9. Creating a 256kbit/s TBF" tc qdisc add dev eth0 handle 1:0 root dsmark indices 1 default_index 0 tc qdisc add dev eth0 handle 2:0 parent 1:0 tbf burst 20480 limit 20480 mtu 1514 rate 32000bps How is the 256K bit/s rate calculated? In this example, 32000bps = 32k bytes per second. Since tc uses bps = bytes per second. I guess burst and limit come into play but how would you go about choosing sensible numbers to reach the desired rate? This is not a mistake. I tested this and it gave a rate close to 256K but not exactly that.

  Read the article

• after enabling mod ssl apache stops listening on port 80

  - by zensys

  I have an ubuntu 12.04 server with zend server CE installed. I now wanted to enable https but after the first steps according to the documentation, 'a2enmod ssl' and 'apache service restart', apache does not listen on 443 but neither on 80, according to netstat -tap | grep http(s)! This is what I see in my error log, but I can't make much of it: [Fri May 25 19:52:39 2012] [notice] caught SIGTERM, shutting down [Fri May 25 19:52:41 2012] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Fri May 25 19:52:41 2012] [notice] ModSecurity for Apache/2.6.3 (http://www.modsecurity.org/) configured. [Fri May 25 19:52:41 2012] [notice] ModSecurity: APR compiled version="1.4.5"; loaded version="1.4.6" [Fri May 25 19:52:41 2012] [warn] ModSecurity: Loaded APR do not match with compiled! [Fri May 25 19:52:41 2012] [notice] ModSecurity: PCRE compiled version="8.12"; loaded version="8.12 2011-01-15" [Fri May 25 19:52:41 2012] [notice] ModSecurity: LUA compiled version="Lua 5.1" [Fri May 25 19:52:41 2012] [notice] ModSecurity: LIBXML compiled version="2.7.8" [Fri May 25 19:53:11 2012] [notice] ModSecurity for Apache/2.6.3 (http://www.modsecurity.org/) configured. [Fri May 25 19:53:11 2012] [notice] ModSecurity: APR compiled version="1.4.5"; loaded version="1.4.6" [Fri May 25 19:53:11 2012] [warn] ModSecurity: Loaded APR do not match with compiled! [Fri May 25 19:53:11 2012] [notice] ModSecurity: PCRE compiled version="8.12"; loaded version="8.12 2011-01-15" [Fri May 25 19:53:11 2012] [notice] ModSecurity: LUA compiled version="Lua 5.1" [Fri May 25 19:53:11 2012] [notice] ModSecurity: LIBXML compiled version="2.7.8" [Fri May 25 19:53:12 2012] [notice] Apache/2.2.22 (Ubuntu) PHP/5.3.8-ZS5.5.0 configured -- resuming normal operations and here is my httpd.conf: # Name based virtual hosting <virtualhost *:80> ServerName www-redirect KeepAlive Off RewriteEngine On RewriteCond %{HTTP_HOST} ^[^\./]+\.[^\./]+$ RewriteRule ^/(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </virtualhost> Alias /shared/js "/home/web/library/js" Alias /shared/image "/home/web/library/image" <IfModule mod_expires.c> <FilesMatch "\.(jpe?g|png|gif|js|css|doc|rtf|xls|pdf)$"> ExpiresActive On ExpiresDefault "access plus 1 week" </FilesMatch> </IfModule> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn <Directory /> Options FollowSymLinks AllowOverride None Order allow,deny allow from all </Directory> <Location /> RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ /index.php [NC,L] </Location> netstat -tap gives: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:mysql *:* LISTEN 765/mysqld tcp 0 0 *:pop3 *:* LISTEN 744/dovecot tcp 0 0 *:imap2 *:* LISTEN 744/dovecot tcp 0 0 *:http *:* LISTEN 19861/apache2 tcp 0 0 *:smtp *:* LISTEN 30365/master tcp 0 0 *:4444 *:* LISTEN 634/sshd tcp 0 0 *:kamanda *:* LISTEN 1167/lighttpd tcp 0 0 *:imaps *:* LISTEN 744/dovecot tcp 0 0 *:amandaidx *:* LISTEN 1167/lighttpd tcp 0 0 localhost.loc:amidxtape *:* LISTEN 19861/apache2 tcp 0 0 *:pop3s *:* LISTEN 744/dovecot tcp 0 384 mail.mysite.:4444 231.214.14.37.dyn:41909 ESTABLISHED 19039/sshd: web [pr tcp 0 0 localhost.localdo:mysql localhost.localdo:48252 ESTABLISHED 765/mysqld tcp 0 0 mail.mysite.:http 231.214.14.37.dyn:54686 TIME_WAIT - tcp 0 0 mail.mysite.:4444 231.214.14.37.dyn:42419 ESTABLISHED 19372/sshd: web [pr tcp 0 0 localhost.localdo:48252 localhost.localdo:mysql ESTABLISHED 19884/auth tcp 0 0 mail.mysite.:http 231.214.14.37.dyn:54685 TIME_WAIT - tcp6 0 0 [::]:pop3 [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:imap2 [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:smtp [::]:* LISTEN 30365/master tcp6 0 0 [::]:4444 [::]:* LISTEN 634/sshd tcp6 0 0 [::]:imaps [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:pop3s [::]:* LISTEN 744/dovecot Anyone knows what I am doing wrong? Perhaps I should take some additional steps to make apache listen 0n 443 but that it stops listening on 80 altogether I can't understand.

  Read the article

• Convert a Linksys WAG54GP2 ADSL router into Access point only to extend my Wifi range

  - by Preet Sangha

  I have a wireless lan running on my ASDL2 connection. The router (Seimens Gigaset sx763) is provided by the ISP and is generally good. However I have couple of dead spots at the far end of the house and since I have my old router sitting in the drawer I thought that I'd try to convert it into simple WAP. However downloading the manual from linksys it seems to be that the manual is from an earlier firmware, but the very first option on the very first page seems promising: Wan Mode: Router or ADSL However after this I'm a bit lost. I know that the wireless card on this box will need a mac address and it must get its address from the master router (I thought static might be best). However the again the manual is out of date I have the option of DHCP: ON or OFF or RELAY I've not even got to the more complex options yet. Question is can this device even work this way (seems like it but I cannot find any docs on it), and if so how? Edit: Having now fiddled around I'm of the opinion that this cannot be done.

  Read the article

• How to write re-usable puppet definitions?

  - by Oliver Probst

  I'd like to write a puppet manifest to install and configure an application on target servers. Parts of this manifest shall be re-usable. Thus I used define for defining my re-usable functionality. Doing so, I've always the problem that there are parts of the definition which are not re-usable. A simple example is a bunch of configuration files to be created. These file must be placed in the same directory. This directory must be created only once. Example: nodes.pp node 'myNode.in.a.domain' { mymodule::addconfig {'configfile1.xml': param => 'somevalue', } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', } } mymodule.pp define mymodule::addconfig ($param) { $config_dir = "/the/directory/" #ensure that directory exits: file { $config_dir: ensure => directory, } #create the configuration file: file { $name: path => "${config_dir}/${name}" content => template('a_template.erb'), require => File[$config_dir], } } This example will fail, because now the resource file {$config_dir: is defined twice. As far as I understood, it is required to extract these parts into a class. Then it looks like this: nodes.pp node 'myNode.in.a.domain' { class { 'mymodule::createConfigurationDirectory': } mymodule::addconfig {'configfile1.xml': param => 'somevalue', require => Class ['mymodule::createConfigurationDirectory'], } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', require => Class ['mymodule::createConfigurationDirectory'], } } But this makes my interface hard use. Every user of my module has to know, that there is a class which is additionally required. For this simple use case the additional class might be acceptable. But with growing module complexity (lots of definitions) I'm a bit afraid of confusing the modules user. So I'd like to know is there a better way to handle this dependencies. Ideally, classes like createConfigurationDirectory are hidden from the user of the modules api. Or are there some other "Best Practices"/Patterns handling such dependencies?

  Read the article

• "Unable to initialize module" fileinfo php-pecl-Fileinfo.x86_64

  - by Myers Network

  I have a brand new server server that I am trying to get setup up. This is a 64 bit machine that I can not install "fileinfo" or "memcache". I have uninstalled these and reinstalled them using yum and pecl with no luck. Yum install fine "no error" but then get error when running php. pecl from what I can tell is only installing 32bit. Does not put anything in the lib64 directory. Here is my output from php -v: PHP Warning: PHP Startup: fileinfo: Unable to initialize module Module compiled with module API=20050922, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=0 These options need to match in Unknown on line 0 PHP Warning: PHP Startup: memcache: Unable to initialize module Module compiled with module API=20050922, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=0 These options need to match in Unknown on line 0 PHP 5.2.14 (cli) (built: Aug 12 2010 16:03:48) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies Here is some other system info incase you need it uname: Linux server.actham.us 2.6.18-194.26.1.el5 #1 SMP Tue Nov 9 12:54:20 EST 2010 x86_64 x86_64 x86_64 GNU/Linux php -m: PHP Warning: PHP Startup: fileinfo: Unable to initialize module Module compiled with module API=20050922, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=0 These options need to match in Unknown on line 0 PHP Warning: PHP Startup: memcache: Unable to initialize module Module compiled with module API=20050922, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=0 These options need to match in Unknown on line 0 [PHP Modules] bz2 calendar ctype curl date dbase dom exif filter ftp gd gettext gmp hash iconv imap json ldap libxml mbstring mcrypt mysql mysqli openssl pcntl pcre PDO pdo_mysql pdo_sqlite readline Reflection session shmop SimpleXML sockets SPL standard tokenizer wddx xml xmlreader xmlrpc xmlwriter xsl zip zlib [Zend Modules] Any help would be greatly appreciated, thanks....

  Read the article

• exim4 to relay emails

  - by Matthieu

  I have exim4 installed on a Linux box. The basics work fine and I can send email from that machine without any problem to whatever email address. I also have a printer/scanner which is capable to send scans as emails. It needs an SMTP gateway to be able to do that. So I give the IP address of that Linux box, changed the configuration a little bit but still cannot get it to work. After I run dpkg-reconfigure exim4-config, here is what I get in /etc/exim4/update-exim4.conf.conf : dc_eximconfig_configtype='internet' dc_other_hostnames='' dc_local_interfaces='127.0.0.1;192.168.2.2' dc_readhost='' dc_relay_domains='mycompanyemail.com' dc_minimaldns='false' dc_relay_nets='192.168.2.0/24' dc_smarthost='' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='' dc_mailname_in_oh='true' dc_localdelivery='mail_spool' My problem is that with this configuration, I can only send to emails @mycompanyemail.com... It says I can use wildcard, but when I do that, the '*' is replaced by whatever filename is in the directory where I run all that. How can I configure it to be able to send emails with any domain ? Or am I doing it wrong ? EDIT : here is the part of the log that's causing trouble : 2011-08-03 16:28:18 H=(NPI2D389C) [192.168.2.20] F=<[email protected]> rejected RCPT <[email protected]>: relay not permitted The first part ([email protected]) does not matter. I changed the email address. The point is that if this email is @mycompanyemail.com then everything works fine. Anything else does not work. I could add gmail.com, but I am looking to have any domain working...

  Read the article

• Mplayer no sound when playing some movies

  - by Ivan Peevski

  Ok, that's a bit of a strange problem, that somehow crept into my system. It used to work fine. Here is the problem as far as I can identify it. When I try to play certain video files with mplayer, there is no sound. As far as I can tell, it is only an issue with ac3 and dts sound tracks (using the ffmpeg decoder). Mplayer says: ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 6 ch, s16le, 1536.0 kbit/33.33% (ratio: 192000->576000) Selected audio codec: [ffdca] afm: ffmpeg (FFmpeg DTS) ========================================================================== [AO_ALSA] Playback open error: Device or resource busy Failed to initialize audio driver 'alsa' Could not open/initialize audio device -> no sound. Audio: no sound (similar with ac3 sound, but using the ffac3 audio codec). Trying different audio output (-ao oss/pcm/sdl) doesn't fix the problem. The strange thing is that if I play these files directly with ffplay, they work fine. mplayer sound with mp3/ogg is fine My alsa configuration is standard (no /etc/asound.conf or ~/.asound*) OS: Linux Gentoo Mplayer: 1.0_rc4_p20100213 (SVN-r30554-4.3.4) FFMpeg: 0.5_p20601-r1 (SVN-r20601) Any other information I can provide?

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• 613 threads limit on debian

  - by Joel

  When running this program thread-limit.c on my dedicated debian server, the output says that my system can't create more than around 600 threads. I need to create more threads, and fix my system misconfiguration. Here are a few informations about my dedicated server: de801:/# uname -a Linux de801.ispfr.net 2.6.18-028stab085.5 #1 SMP Thu Apr 14 15:06:33 MSD 2011 x86_64 GNU/Linux de801:/# java -version java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) de801:/# ldd $(which java) linux-vdso.so.1 => (0x00007fffbc3fd000) libpthread.so.0 => /lib/libpthread.so.0 (0x00002af013225000) libjli.so => /usr/lib/jvm/java-6-sun-1.6.0.26/jre/bin/../lib/amd64/jli/libjli.so (0x00002af013441000) libdl.so.2 => /lib/libdl.so.2 (0x00002af01354b000) libc.so.6 => /lib/libc.so.6 (0x00002af013750000) /lib64/ld-linux-x86-64.so.2 (0x00002af013008000) de801:/# cat /proc/sys/kernel/threads-max 1589248 de801:/# ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 794624 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 10240 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 128 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Here is the output of the C program de801:/test# ./thread-limit Creating threads ... Address of c = 1061520 KB Address of c = 1081300 KB Address of c = 1080904 KB Address of c = 1081168 KB Address of c = 1080508 KB Address of c = 1080640 KB Address of c = 1081432 KB Address of c = 1081036 KB Address of c = 1080772 KB 100 threads so far ... 200 threads so far ... 300 threads so far ... 400 threads so far ... 500 threads so far ... 600 threads so far ... Failed with return code 12 creating thread 637. Any ideas how to fix this please ?

  Read the article

• What is the most likely cause to a Blue Screen of Death when the user presses Ctrl-Alt-Delete?

  - by Jay

  My wife is experiencing this with her work laptop--she presses Ctrl-Alt-Delete to lock and she gets the BSOD. The first troubleshooting step is usually to "re-image", and it's locked down. So with this question, I am asking whether the behavior is unique enough that someone in the stack-universe knows exactly what this is (something I can tell her to tell her help desk support). Update: help desk said to order more RAM. Alt-tabbing caused the same behavior today. And...she learned that multiple users are affected. I'm not sure I'll be able to clean any additional info that will help w/ troubleshooting. I'll leave the question here for a bit and if an answer ends up being the actual solution, I'll accept it. If not, I think I should probably remove the question (i'll check meta). Update #2.5: The cause appears to be a ctrl-alt-delete keystroke while Sales Team Configurator is open. This can either be to lock the screen (there are workaround in answers already present) or to unlock the screen (no workaround for that).

  Read the article

< Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701  | Next Page >