Search Results

Search found 22167 results on 887 pages for 'message listener'.

Page 695/887 | < Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >

  • Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

    - by Patrick
    While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

    Read the article

  • jdbc4 CommunicationsException

    - by letronje
    I have a machine running a java app talking to a mysql instance running on the same instance. the app uses jdbc4 drivers from mysql. I keep getting com.mysql.jdbc.exceptions.jdbc4.CommunicationsException at random times. Here is the whole message. Could not open JDBC Connection for transaction; nested exception is com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet successfully received from the server was25899 milliseconds ago.The last packet sent successfully to the server was 25899 milliseconds ago, which is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem. For mysql, the value of global 'wait_timeout' and 'interactive_timeout' is set to 3600 seconds and 'connect_timeout' is set to 60 secs. the wait timeout value is much higher than the 26 secs(25899 msecs). mentioned in the exception trace. I use dbcp for connection pooling and here is spring bean config for the datasource. <bean id="dataSource" destroy-method="close" class="org.apache.commons.dbcp.BasicDataSource" > <property name="driverClassName" value="com.mysql.jdbc.Driver"/> <property name="url" value="jdbc:mysql://localhost:3306/db"/> <property name="username" value="xxx"/> <property name="password" value="xxx" /> <property name="poolPreparedStatements" value="false" /> <property name="maxActive" value="3" /> <property name="maxIdle" value="3" /> </bean> Any idea why this could be happening? Will using c3p0 solve the problem ?

    Read the article

  • How do I disable the firewall on blackberry?

    - by user15660
    I own a Blackberry 9630 tour.(Sprint). The firewall is enabled with a lock sign and grayed out. I'm not able to disable it. Because of this many of my blackberry apps don't work as it gives a message "The application has tried to open a connection that's not allowed by your IT policy". I tried all options and there's nothing to disable. This is a personal blackberry and I don't have an IT policy on it. I did all methods like wiping, formatting/resetting to factory settings acc. to blackberry site by running their reset app from PC etc etc. but nothing works I tried CrackUtil for blackberry and that worked and wiped the blackberry. I restored my bb and started using it just to notice that the firewall is enabled back after a desktop manager connection to PC. I even made sure the policy.bin file on PC is a regular one with no IT policy. How do I get this disabled? I had the same problem on my old blackberry 8330 and crackutil disabled the firewall. but after a few days after a desktop manager update of blackberry OS and other small stuff the firewall got enabled again. Please give me a solutions to disable the firewall on blackberry

    Read the article

  • Problem with Windows Service and network printers.

    - by Mohammadreza
    I have a Windows Service application that every now and then should print some documents. As far as I know, to print those documents, my service must be run with a user account other than Local Service or Network Service. So i have created a user account and added that to the Administrators group and ran the service with it. With locally installed printers, I don't have any problems because those printers are automatically installed for all accounts. To be able to print with the network printers, I have created another application that syncs the installed printers of the currently logged in user with the user account that my service uses with the rundll32.exe printui.dll,PrintUIEntry command. In Vista and Windows7 I don't have any problems with the syncing of the printers because every time that a printer should be installed the authentication window will open and it asks for the appropriate user account to install that printer (The service user account is not created on the network printers computers) but in XP a find dialog with the "Connecting to {printername}" caption will appear and stops responding, or sometimes it installs the printer but every time service tries to print, a Win32Exception with "A StartDocPrinter call was not issued" message will throw and in the user account that runs the sync application a duplicate printer will be shown and I couldn't delete those printers unless with force (using registry). Am I doing the right thing for printing documents with Windows Services at all? If yes, how can I solve the above-mentioned problem? And if not, what the heck should I do? Thanks.

    Read the article

  • How can I recover my system after running 'mkfs' on the system partition?

    - by Filip Podgórny
    I am not a Linux user, and was doing some homework, I blindly typed sudo mkfs ext3 dev/sda2 (I had Ubuntu as Windows installation). I've done few more things, and turned Ubuntu off to switch on Windows back. No operating system installed - this is the message I'm getting. I plugged my HDD onto another computer and all my files are still there. What should I do to get my windows installation back? df -l (before mkfs) /dev/loop0 29G 2,0G 27G 8% / udev 3,0G 4,0K 3,0G 1% /dev tmpfs 1,2G 900K 1,2G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,0G 1,3M 3,0G 1% /run/shm /dev/sda3 455G 123G 333G 27% /host /dev/sdb1 1,9G 820M 1,1G 43% /media/PHONE CARD mkfs output (polish, sorry) mke2fs 1.41.14 (22-Dec-2010) Etykieta systemu plików= Typ OS: Linux Rozmiar bloku=1024 (log=0) Rozmiar fragmentu=1024 (log=0) Stride=0 bloków, szerokosc Stripe=0 bloków 25688 i-wezlów, 102400 bloków 5120 bloków (5.00%) zarezerwowanych dla superuzytkownika Pierwszy blok danych=1 Maksymalna liczba bloków systemu plików=67371008 13 grup bloków 8192 bloków w grupie, 8192 fragmentów w grupie 1976 i-wezlów w grupie Kopie zapasowe superbloku zapisane w blokach: 8193, 24577, 40961, 57345, 73729 Zapis tablicy i-wezlów: zakonczono Tworzenie kroniki (4096 bloków): wykonano Zapis superbloków i podsumowania systemu plików: wykonano Ten system plików bedzie automatycznie sprawdzany co kazde 30 montowan lub co 180 dni, zaleznie co nastapi pierwsze. Mozna to zmienic poprzez tune2fs -c lub -i.

    Read the article

  • tomcat start service NoClassDefFoundError?

    - by mobibob
    I am trying to redeploy my server on a new server with a different DNS and IP address. Therefore, I think my problem is in the configuration to find JAR files. Is there a way to get more detail as to which class is being requested so I can narrow down my problem. Does anyone have any suggested troubleshooting guidance for such problem? BTW - the configuration was working on the original server, and I tried to find all the locations in the files: conf/, worker.properties, server.xml, catalina.policy, web.xml. The jarkarta.log repeats the starting... error initializing ... forever. Very boring, therefore, the problem has to be fundamental. Apparently, the error message is recorded in the log across more than one line and would be this: Error occurred during initialization of VM java/lang/NoClassDefFoundError : java/lang/Object [2012-05-21 18:20:33] [info] Procrun (2.0.4.0) started [2012-05-21 18:20:33] [info] Running Service... [2012-05-21 18:20:33] [info] Starting service... [2012-05-21 18:20:33] [info] Error occurred during initialization of VM [2012-05-21 18:20:33] [info] java/lang/NoClassDefFoundError [2012-05-21 18:20:33] [info] : java/lang/Object [2012-05-21 18:21:59] [info] Procrun (2.0.4.0) started [2012-05-21 18:21:59] [info] Running Service... [2012-05-21 18:21:59] [info] Starting service... [2012-05-21 18:21:59] [info] Error occurred during initialization of VM [2012-05-21 18:21:59] [info] java/lang/NoClassDefFoundError [2012-05-21 18:21:59] [info] : java/lang/Object [2012-05-21 18:35:16] [info] Procrun (2.0.4.0) started [2012-05-21 18:35:16] [info] Running Service... [2012-05-21 18:35:16] [info] Starting service... [2012-05-21 18:35:16] [info] Error occurred during initialization of VM [2012-05-21 18:35:16] [info] java/lang/NoClassDefFoundError [2012-05-21 18:35:16] [info] : java/lang/Object [2012-05-21 18:45:25] [info] Procrun (2.0.4.0) started [2012-05-21 18:45:25] [info] Running Service... [2012-05-21 18:45:25] [info] Starting service... [2012-05-21 18:45:25] [info] Error occurred during initialization of VM [2012-05-21 18:45:25] [info] java/lang/NoClassDefFoundError [2012-05-21 18:45:25] [info] : java/lang/Object [2012-05-21 18:46:29] [info] Procrun (2.0.4.0) started [2012-05-21 18:46:29] [info] Running Service... [2012-05-21 18:46:29] [info] Starting service... [2012-05-21 18:46:29] [info] Error occurred during initialization of VM [2012-05-21 18:46:29] [info] java/lang/NoClassDefFoundError

    Read the article

  • Thin server : `start_tcp_server': no acceptor (port is in use or requires root privileges) (RuntimeError)

    - by Rubytastic
    My thin webserver fails to start with an error message. I can hardly find any information or leads on how to fix this, anyone an idea? thx Thin web server (v1.5.0 codename Knife) Maximum connections set to 1024 Listening on 0.0.0.0:9292, CTRL+C to stop /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:526:in start_tcp_server': no acceptor (port is in use or requires root privileges) (RuntimeError) from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:526:instart_server' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/backends/tcp_server.rb:16:in connect' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/backends/base.rb:55:inblock in start' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:187:in call' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:187:inrun_machine' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:187:in run' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/backends/base.rb:63:instart' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/server.rb:159:in start' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/handler/thin.rb:13:inrun' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/server.rb:265:in start' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/server.rb:137:instart' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/bin/rackup:4:in <top (required)>' from /srv/gamers/shared/bundle/ruby/1.9.1/bin/rackup:19:inload' from /srv/gamers/shared/bundle/ruby/1.9.1/bin/rackup:19:in `'

    Read the article

  • CentOS iscsi initiator has session but there is no block device

    - by jcalfee314
    I have installed the scsi-target-utils package on CentOS and I used it to perform a discovery. The discovery did give me an active session. I restarted the iscsi service but I do not see any new devices (fdisk -l). I see in /var/log/messages that my connection is operational now. I'm not sure how to debug this further. Can someone direct me into fixing this? discovery: iscsiadm -m discovery -t sendtargets -p 192.168.0.155 returns: 192.168.0.155:3260,-1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 Just to verify it actually worked: iscsiadm -m session returns tcp: [1] 192.168.0.155:3260,1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 restarting as the directions say to do: service iscsi restart output written to /var/log/message Stopping iscsi: Sep 20 12:14:22 localhost kernel: connection1:0: detected conn error (1020) [ OK ] Starting iscsi: Sep 20 12:14:22 localhost kernel: scsi1 : iSCSI Initiator over TCP/IP Sep 20 12:14:22 localhost iscsid: Connection1:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is shutdown. Sep 20 12:14:22 localhost iscsid: Could not set session2 priority. READ/WRITE throughout and latency could be affected. [ OK ] [root@db iscsi]# Sep 20 12:14:23 localhost iscsid: Connection2:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is operational now Ran a login command: iscsiadm -m node -T iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 -p 192.168.0.155 -l No errors, no logging occurred. Next I compared the output from "fdisk -l|egrep dev" both with the iscsi session and without. There is no difference. I suppose I could just look in /etc/mtab. Any ideas on how I can get an iscsi device?

    Read the article

  • Explorer.exe keeps crashing during log in

    - by asif
    I have got a weird problem. My windows 7 has two user accounts (both are administrator). I can log in to one account and do all sort of work. But whenever I try to log in to other account, it shows a blank screen and a messagebox pops up with "windows explorer has stopped working". The options available are: Close the program Check online for a solution and close the program The problem signature is as follows: Problem Event Name: InPageError Error Status Code: c000009c Faulting Media Type: 00000003 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 If I press alt+ctrl+del and then select start task manager, it also crashes. I can not run any program using runas command (from good profile) too. The task manager and runas programs all show same problem signature. I read the similar question and followed all the steps, but no luck. Later, I viewed the event log and found that, explorer.exe could not access a file. I checked the location but the file is there. The actual message is: Windows cannot access the file C:\Users\testuser\AppData\Local\Microsoft\Windows\Caches\{AFBF9F1A-8EE8-4C77-AF34-C647E37CA0D9}.1.ver0x0000000000000020.db for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Windows Explorer because of this error. The question is, how can I resolve this issue? Should I just delete the file or replace it with another one to stop explorer.exe from crashing? offtopic: What is the content of this file and why it is necessary?

    Read the article

  • Postfix with relayhost - relay access denied for bounces

    - by Alex
    I have set up a Postfix Mailserver, outgoing mail is being sent through a smarthost/relayhost which requires authentification. That works great, internal clients can send to foreign recipients though this relayhost. However, when an external mail for a local, non-existent user arrives at the server, postfix tries to send a non-delivery notification to the sender. This mail is also sent through the relayhost obviously, but it fails with error 554 5.7.1 : Relay access denied This gets logged to the mail.log: Nov 9 10:26:42 mail postfix/local[5051]: 6568CC1383: to=<[email protected]>, relay=local, delay=0.13, delays=0.02/0.02/0/0.09, dsn=5.1.1, status=bounced (unknown user: "test") Nov 9 10:26:42 mail postfix/cleanup[5045]: 85DF9BFECD: message-id=<[email protected]> Nov 9 10:26:42 mail postfix/qmgr[4912]: 85DF9BFECD: from=<>, size=3066, nrcpt=1 (queue active) Nov 9 10:26:42 mail postfix/bounce[5052]: 6568CC1383: sender non-delivery notification: 85DF9BFECD Nov 9 10:26:42 mail postfix/qmgr[4912]: 6568CC1383: removed Nov 9 10:26:43 mail postfix/smtp[5053]: 85DF9BFECD: to=<[email protected]>, relay=mail.provider.com[168.84.25.111]:587, delay=0.48, delays=0.02/0.01/0.26/0.18, dsn=5.7.1, status=bounced (host mail.provider.com[168.84.25.111] said: 554 5.7.1 <[email protected]>: Relay access denied (in reply to RCPT TO command)) Nov 9 10:26:43 mail postfix/qmgr[4912]: 85DF9BFECD: removed According to this error, I suppose that postfix does not login at the relayhost when sending those bounces. Why? Normal outgoing mail works just fine. This is how my main.cf looks like: http://pastebin.com/Uu1Dryxy And of course /etc/postfix/sasl_password contains the correct credentials for the relayhost. Thanks in advance!

    Read the article

  • ios7 loops on the "trust this computer" dialog

    - by gcb
    trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

    Read the article

  • postfix smtp_fallback_relay for deferred messages to a single domain

    - by EdwardTeach
    I use Postfix to send messages to a mail server outside my organization which frequently rejects/defers my mail. My Postfix server sees that these messages are deferred and tries again, eventually getting through. Final delivery can take up to an hour, which makes my users unhappy. In comparison, mail from my Postfix server to other hosts works normally. I have now found out about a second, unofficial MX for this domain that does not reject/defer mail. This second MX does not appear when doing a DNS MX query for the domain. Therefore, for the problem domain I would like to use this second MX as a fallback. That is: whenever mail is deferred by the primary MX, try again on the unofficial second MX. I see that there is already a postfix configuration "smtp_fallback_relay". However the documentation seems to indicate that I can not restrict usage of the fallback to a single domain. The documentation also doesn't mention deferred message handling. So is there a way to configure a single-domain, deferred-retry fallback host in Postfix? For reference, I am including my postconf output (the host names and ip addresses are fake): alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/etc/postfix/legacy_mailman, ldap:/etc/postfix/ldap-aliases.cf append_dot_mydomain = no biff = no config_directory = /etc/postfix default_destination_concurrency_limit = 2 inet_interfaces = all inet_protocols = all local_destination_concurrency_limit = 2 local_recipient_maps = $alias_maps mailbox_size_limit = 0 mydestination = myhost.my.network, localhost.my.network, localhost, my.network myhostname = myhost.my.network mynetworks = 127.0.0.0/8, [::ffff:127.0.0.0]/104, [::1]/128, 10.10.10.0/24 myorigin = my.network readme_directory = no recipient_delimiter = + relay_domains = $mydestination relayhost = smtp_fallback_relay = the.problem.host smtp_header_checks = smtpd_banner = $myhostname ESMTP $mail_name virtual_alias_maps = hash:/etc/postfix/virtual

    Read the article

  • All websites migrated from server running IIS6 to IIS7

    - by Leah
    Hi, I hope someone will be able to help me with this. We have recently migrated all of our clients' sites to a new server running IIS7 - all the sites were originally running on a server running IIS6. Ever since the migration, lots of our clients are reporting error messages. There seems to be quite a number of issues related to sending emails and also, we have had the following error message reported by several different clients: Server Error in '/' Application. -------------------------------------------------------------------------------- Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. I have read elsewhere that this error can appear if a button is clicked before the whole page has finished loading. But as this error has now appeared on multiple sites and only since the server migration, it seems to me that it must be something else. I was wondering if someone could tell me if there is something specific which needs to be changed for .NET sites when sites are moved from a server running IIS6 to a server running IIS7? I don't deal with the actual servers very much so I'm afraid this is very much a grey area for me. Any help would be very much appreciated.

    Read the article

  • How do I stop postfix from handling my mail?

    - by Tatu Ulmanen
    Here's the situation: I have a domain, let's say domain.com. That domain has Google Apps for Business enabled, so all mail delivered to @domain.com will end up at Google (MX records point to Google). I have a PHP script at domain.com that I use to send mail to myself. But when the PHP script tries to send mail to [email protected], Postfix at that server decides that the recipient is a local user (because the address matches the domain Postfix itself is at), and tries to deliver the mail locally. But inevitably fails as the mailbox cannot be found. How can I instruct Postfix to not try to handle locally any emails to @domain.com and just send them forward so Google can pick them up? I have already removed $myhostname from mydestination field in Postfix's main.cf file, and I have restarted Postfix but Postfix still tries to deliver the mail locally. Here's a snip from mail.log that show the problem (addresses replaced): postfix/pickup[20643]: AF718422E5: uid=33 from=<server> postfix/cleanup[20669]: AF718422E5: message-id=<62e706bcca5a0de0bfec6baa576d88a5@server> postfix/qmgr[20642]: AF718422E5: from=<server>, size=517, nrcpt=1 (queue active) postfix/pipe[20678]: AF718422E5: to=<[email protected]>, relay=dovecot, delay=0.62, delays=0.47/0.03/0/0.13, dsn=5.1.1, status=bounced (user unknown) postfix/bounce[20680]: AF718422E5: sender non-delivery notification: 29598422E7 postfix/qmgr[20642]: AF718422E5: removed

    Read the article

  • Cannot find network path for computer in workgroup of home Windows XP PCs

    - by John Galt
    VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

    Read the article

  • with nginx having the base url rewrite to https

    - by jchysk
    I'd like only my base domain www.domain.com to be rewritten to https://www.domain.com By default in my https block I have it reroute to http:// if it's not ~uri = "/" (base domain) or static content. server { listen 443; set $ssltoggle 2; if ($uri ~ ^/(img|js|css|static)/) { set $ssltoggle 1; } if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle != 1) { rewrite ^(.*)$ http://$server_name$1 permanent; } } So in my http block I need to do the rewrite if it has to https: server { listen 80; if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle = 1) { rewrite ^(.*)$ https://$server_name$1 permanent; } } If I don't have the $uri = '/' if-statement in the http block, then https works fine if I go directly to it, but I won't get redirected if I go to regular http which is expected. If I do put that in-statement in the http block then everything stops working within minutes. It might work for a few requests, but will always stop within a minute or so. In browsers I just get a blank page for all requests. If I restart nginx it continues to not work until I remove both if-statement blocks in both the https and http blocks and restart nginx. When I look in the error logs I don't see anything logged. When I look in the access log I see this message: "-" 400 0 "-" "-" which I assume means a 400 error. I don't understand why this doesn't work for me. My end goal is to have the base domain be https-only while all other pages default to http. How can I achieve this?

    Read the article

  • Ubuntu upgrade process failed

    - by Spin0us
    I tried to dist-upgrade my ubuntu server on my percona cluster but it failed with this message The following packages have unmet dependencies: libmysqlclient18 : Depends: libmariadbclient18 (= 5.5.33a+maria-1~precise) but it is not installable And here is the package listing # dpkg --list | grep -E 'percona|mysql' ii libdbd-mysql-perl 4.020-1build2 Perl5 database interface to the MySQL database iU libmysqlclient18 5.5.33a+maria-1~precise Virtual package to satisfy external depends ii mariadb-common 5.5.33a+maria-1~precise MariaDB database common files (e.g. /etc/mysql/conf.d/mariadb.cnf) ii percona-xtrabackup 2.1.5-680-1.precise Open source backup tool for InnoDB and XtraDB ii percona-xtradb-cluster-client-5.5 5.5.31-23.7.5-438.precise Percona Server database client binaries ii percona-xtradb-cluster-common-5.5 5.5.33-23.7.6-496.precise Percona Server database common files (e.g. /etc/mysql/my.cnf) ii percona-xtradb-cluster-galera-2.x 157.precise Galera components of Percona XtraDB Cluster ii percona-xtradb-cluster-server-5.5 5.5.31-23.7.5-438.precise Percona Server database server binaries ii php5-mysql 5.3.10-1ubuntu3.8 MySQL module for php5 During the install of the server, mariadb and galera cluster have first been installed. Then removed to be replaced by percona XtraDBCluster. So i think this is the source of the problem. But how can i resolve this without reinstalling all ? UPDATE 1 # apt-cache policy libmariadbclient18 libmariadbclient18: Installed: (none) Candidate: (none) Version table: 5.5.32+maria-1~precise 0 100 /var/lib/dpkg/status

    Read the article

  • Using modem for sending voice recording

    - by ircmaxell
    I've got an interesting one for you. I've been going over my server monitoring and notification systems (Nagios based), and realized that if our internet connection goes down, there's no way for it to notify me. I already have a modem listening (Via CentOS 5) on a spare POTS line so that I can dial-in in case our internet goes down. I was wondering if I could come up with a script (Shell, Python, etc) that can dial out and play a recorded message (wave file I'm guessing) when it's picked up. I know Windows supports voice calls over a voice modem, I was wondering if a solution existed for Linux... I know asterisk can probably do it, but isn't that overkill (A full blown VOIP system just for a notification mechanism that will hopefully never be used)? And wouldn't it interfere with the modem's primary function as a backup network interface (PPP spawned via mgetty)? I've done some searching, and haven't really come up with much. I know how to dial out from the command line, but only as a modem (not as voice). Worst case, I could set it up to dial out as a modem, and then just realize that if I get a call with modem sounds from that number that it's the notification... Any insight would be appreciated...

    Read the article

  • Booting Debian5 (Lenny) on 2.6.16 Kernel

    - by bk
    Due to a proprietary kernel module that I don't have the source to and is very picky about what kernel versions it will load into (even with modprobe --f), I find myself in need of running a 2.6.16.XX kernel on my Debian5 machine. The machine boots fine with the 2.6.26-2 stock kernel, and I have successfully build and booted 2.6.26 and 2.6.31 based kernels by making a .deb and the ndoing dpkg -i. However, when I do the same approach for 2.6.16, the kernel hangs at boot. I'm testing this in a VMWare image, so I don't think its an issue of newer hardware not supported by the older kernel. For a working kernel, at boot I get: Uncompressing Linux.. OK booting the kernel Loading, please wait... mdadm: No devices listed in the conf file were found kinit name_to_dev_t /dev/hda5 (dev5,3) ... With 2.6.16.60, I never get the kinit message. It hangs after the mdadm line. There are no mdadm arrays on this machine, so I doubt its an issue inside the mdadm stuff, which is supposed to just error out as it does in the 2.6.26 case above, but for some reason I'm getting stuck getting into kinit. I've been banging my head against this wall so I'm very open to suggestions on how to go about troubleshooting this.

    Read the article

  • WMI Sensors monitoring

    - by DmitrySemenov
    Monitoring tool Paessler stopped to monitor WMI Windows Sensors Paessler is Updated to version 12.4.5.3165. (10/30/2012 1:44:11 PM) Paessler windows sensors (against windows server 2008 R2 web edition) stopped to work (no changes have been made on server that we monitor) with the message Connection could not be established (80070005: Access is denied - Host: 192.168.2.10, User: Administrator, Password: **, Domain: ntlmdomain:) (code: PE015) However if I go to Virtual machine used to run Paessler and the following cscript runs successfully: strComputer = "192.168.2.10" Set objSWbemLocator = CreateObject("WbemScripting.SWbemLocator") Set objSWbemServices = objSWbemLocator.ConnectServer _ (strComputer, "root\cimv2", _ "Administrator", "pass") Set colProcessList = objSWbemServices.ExecQuery( _ "Select * From Win32_Processor") For Each objProcess in colProcessList Wscript.Echo "Process Name: " & objProcess.Name Next I'm getting output C:\>cscript test.vbs Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Process Name: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz Process Name: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz So WMI works a. I gave Administrator credentials for Device to monitor in Paessler setting, the same I used in the script above b. I restarted windows server (broken sensors) - but this didn't help c. I restarted Paessler probe service - no effect any ideas?

    Read the article

  • Warning messages while build Apache server

    - by GoinOff
    I am building Apache server 2.4.6 from source and am not sure about a few warning messages I received during the rpm build process. The build completes OK and everything seems fine..BTW, this is on CentOS 5.5... During the make process: /home/johnm/dev/project1/install/linux/BUILD/httpd-2.4.6/srclib/apr/libtool --silent --mode=install install mod_authn_file.la /home/johnm/dev/project1/install/linux/tmp/usr/local/apache2/modules/ libtool: install: warning: remember to run `libtool --finish /usr/local/apache2/modules' What is this warning message about?? remember to run libtool --finish ?? Also, I see this: libtool: install: warning: `/home/johnm/dev/project1/install/linux/BUILD/httpd-2.4.6/srclib/apr-util/libaprutil-1.la' has not been installed in `/usr/local/apache2/lib' I am building Apache in a temp directory but libtools seems to be looking in the wrong place (/usr/local/apache2/lib instead of /home/johnm/dev/project1/install/linux/tmp/usr/local/apache2/lib). This seems like something I can blow off?? In my specfile I set DESTDIR to /home/johnm/dev/project1/install/linux/tmp where the install files are placed: %install export DESTDIR=%{buildroot} make install Both messages appear numerous times during the make process. When I install the rpm on the system, everything appears to work without problems..Thinking I can ignore these messages??? or am I missing something important??

    Read the article

  • "Delivered-To" Header in Exchange

    - by Kaii
    In some SMTP server implementations (i.e. Postfix) you can enable Delivered-To and X-Original-To headers that will be added to your email. (or [X-]Envelope-To) This is very helpful with distribution lists to determine which e-mail address the mail has been redirected to. So, when the mail has been sent to [email protected], you can see in the Delivered-To or Envelope-To header that it has been redirected (distributed) to [email protected], which is one of many other e-mail addresses that are linked to a single mailbox. How do I find which address was used to deliver this mail to a specific mailbox on Microsoft Exchange 2010? Looking at the plain message (with all headers) i can not find any information that the mail arrived via address [email protected] I think I need the Delivered-To header (or a similar one) to be set on Microsoft Exchange when a mail is delivered via distribution lists. Is there any way to enable such header in Exchange 2010? I need it so that our Ticket system (OTRS) correctly recognizes where the ticket belongs to. Adding all the e-mail addresses of all distribution lists to the system configuration is not the right solution. And if there is a solution for Exchange 2010, is this possibly also applicable to Exchange 2007?

    Read the article

  • Postfix "loops back to myself" error on relay to another IP address on same machine

    - by Nic Wolff
    I'm trying to relay all mail for one domain "ourdomain.tld" from Postfix running on port 2525 of one interface to another SMTP server running on port 25 of another interface on the same machine. However, when a message is received for that domain, we're getting a "mail for loops back to myself" error. Below are netstat and postconf, the contents of our /etc/postfix/transport file, and the error that Postfix is logging. (The high bytes of each IP address are XXXed out.) Am I missing something obvious? Thanks - # netstat -ln -A inet Proto Recv-Q Send-Q Local Address Foreign Address State ... tcp 0 0 XXX.XXX.138.209:25 0.0.0.0:* LISTEN tcp 0 0 XXX.XXX.138.210:2525 0.0.0.0:* LISTEN # postconf -d | grep mail_version mail_version = 2.8.4 # postconf -n alias_maps = hash:/etc/aliases allow_mail_to_commands = alias,forward bounce_queue_lifetime = 0 command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 default_privs = nobody default_process_limit = 200 html_directory = no inet_interfaces = XXX.XXX.138.210 local_recipient_maps = local_transport = error:local mail delivery is disabled mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man message_size_limit = 10240000 mydestination = mydomain = ourdomain.tld myhostname = ourdomain.tld mynetworks = XXX.XXX.119.0/24, XXX.XXX.138.0/24, XXX.XXX.136.128/25 myorigin = ourdomain.tld newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /etc/postfix recipient_delimiter = + relay_domains = ourdomain.tld relay_recipient_maps = sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtpd_authorized_verp_clients = $mynetworks smtpd_recipient_limit = 10000 transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 450 # cat /etc/postfix/transport ourdomain.tld relay:[XXX.XXX.138.209]:25 # tail -f /var/log/maillog ... Aug 2 23:58:36 va4 postfix/smtp[9846]: 9858A758404: to=<nicwolff@... >, relay=XXX.XXX.138.209[XXX.XXX.138.209]:25, delay=1.1, delays=0.08/0.01/1/0, dsn=5.4.6, status=bounced (mail for [XXX.XXX.138.209]:25 loops back to myself)

    Read the article

  • MGE UPS Cut power - What happened?

    - by JT.WK
    I have 3 x MGE Pulsar M 3000 2700w UPS units within my server room which have run perfectly up until now. On Saturday morning I noticed that one of these UPS units was no longer outputting power, the lcd displayed a message saying "load not powered" and told me to press the power button to start output. Needless to say that the servers, switches and routers is was supporting were all turned off. I tried pressing and even holding the power button, but the unit refused to start back up again. Only power cycling the unit got it back up again. I have checked the logs on the UPS, although they were useless. Nothing out of the ordinary, and no email notifications had been sent. The output level sits on about 51% and all battery checks are OK. It is now three days on and the UPS is still up and running (although I am scheduling an outage to get it out of there ASAP). Does anyone have any idea what could have gone wrong here? Is there anything else that I can check that could help?

    Read the article

  • postfix smtpd rejecting mail from outside network match_list_match: no match

    - by Loopo
    My postfix (V: 2.5.5-1.1) running on ubuntu server (9.04) started to reject mail arriving in from outside about 2 weeks ago. Doing a "manual" session via telnet shows that the connection is always closed after the MAIL FROM: [email protected] line is input, with the message "Connection closed by foreign host." Doing the same from another client inside the LAN works fine. In the log files I get the line "lost connection after MAIL from xxxxx.tld[xxx.xxx.xxx.xxx]" This is after some lines like: match_hostaddr: XXX.XXX.XXX.XXX ~? [::1]/128 match_hostname: XXXX.tld ~? 192.168.1.0/24 ... match_list_match: xxx.xxx.xxx.xxx: no match which seem to suggest some kind of filter which checks for allowed addresses. I have been unable to locate where this filter lives, or how to turn it off. I'm not even sure if that's what's causing my problem. Connections from inside the LAN don't get disconnected even though they also show a "match_list_match: ... no match" line. I didn't change any configuration files recently, below is my main.cf as it currently stands. I don't really know what all the parameters do and how they interact. I just set it up initially and it worked fine (up to recently). smtpd_banner = $myhostname ESMTP $mail_name (GNU) biff = no readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/server.crt smtpd_tls_key_file=/etc/ssl/private/server.key #smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_sasl_auth_enable = no smtp_use_tls=no smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth myhostname = XXXXXXX.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = XXXX.XXXX.com, XXXX.com, localhost.XXXXX.com, localhost relayhost = XXX.XXX.XXX.XXX mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.1.0/24 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_sasl_local_domain = #smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_ when checking the process list, postfix/smtpd runs as smtpd -n smtp -t inet -u -c -o stress -v -v Any clues?

    Read the article

< Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >