Search Results

Search found 19904 results on 797 pages for 'software enthusiastic'.

Page 695/797 | < Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >

• Sudden and frequent hangs on desktop computer: mobo or CPU fault?

  - by djechelon

  I have a desktop computer equipped with an ASUS Crosshair 2 Formula and a Phenom x6 3.2GHz CPU. My problem is that often the computer will hang all of a sudden, completely stopping responding. When that occurs, reset key is inoperative and power button turns the computer off but is unable to turn it back on. I have to physically disconnect power cable. The problem can occur anytime, when I'm booting Windows, when I'm logging in, when I'm listening to a song, when I'm browsing Internet, etc. It always occurs after very few minutes of 3D gameplay I thought it was a video card fault. I had 3 8800GTX so I could try all combinations of them: didn't fix I thought it was a RAM problem: I tried running with only a subset of my DDR2 banks but didn't fix. Almost every time I have to reset and reconfigure BIOS (without AHCI, Win7 won't boot, so I need to restore a few things). If I enable AMD Live, Cool&Quiet or other things from CPU configuration menu I'll be sure that the computer won't reach Windows desktop in 99% of cases (it randomly hangs somewhere in the boot process or even in the BIOS POST). Another interesting thing is that during the POST process the computer always takes unusually long time detecting USB devices (LCD POSTer shows USB INIT), and I've also tried disconnecting all USB devices but didn't take less time to POST BIOS revision is 2702, the latest. Today I found a different behaviour once: during boot screen I got a BSOD with error Stop 0x00000101 A clock interrupt was not received on a secondary processor within the allocated time interval, and this is usually related to overclocking, but I never overclocked my CPU. Judging from the description of my problem, hoping someone had the same and fixed, and since I don't have a spare CPU or motherboard for replacement, I'd like to ask if you think this is a problem with faulty CPU or faulty motherboard, and if I can perform additional tests (I mean software tests because of my lack of spare components) to identify the component to replace.

  Read the article

• Please help to find a solution for two way, real-time synchronization on Centos 5.5 64Bit

  - by Vipul Limbachiya

  I am in need of a real time, two way synchronization software for Centos 5.5 / 64Bit. Here's little explanation: It needs to be able to perform: Two way synchronization. It must be realtime. By realtime means it can be almost realtime, i.e. a delay of 1 second for example is fine. And the folders are on the same server. I am currently using GlusterFS across two webservers. However, it has extremely poor small file read performance and it's slowing down my website. There's nothing more that can be done to improve this, I have already tested many configurations. As a solution, I was going to mount a RAM drive (tmpfs) that mirrors the GlusterFS web files but get the webserver to use the RAM drive. The issue is that I need two way realtime mirroring or replication between glusterfs and the RAM drive. I need this is as Apache writes files as wells. As I said, realtime two way synchronization across two folders. Which are in fact 2 different mounts points. The RAM (tmpfs) mount poing and the GlusterFS mount point. I already know about: Rsync - Which is one way Unison - Which is not realtime Please suggest me any solution free or paid. Thanks in advance

  Read the article

• which vista services can be disabled with impunity?

  - by GwenKillerby

  I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. I've looked at the other questions but they didn't answer me. thanks, Gwen.

  Read the article

• Periodic internet connection drops

  - by sterlingholt

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• Mac, VNC and multiple monitors

  - by MarqueIV

  I asked a similar question here before but apparently I wasn't as clear as I had expected by the responses. That said, I'll try again. I have a Mac Pro with quad monitors which I would like to access remotely. I've been using VNC for this (either via screen sharing or a dedicated VNC client), which works, but the VNC protocol matches the physical layout/resolutions of attached monitors. One of the things I like about Microsoft's Remote Desktop (Terminal Server) client is that when you connect, it blanks out the local screens and sets the resolution to a client-specified setting. In other words, when natively running Windows, even though I'm running a physical 30" monitor flanked by 2 24" monitors as well as a 21" Cintiq monitor, I can set the Remote Desktop resolution to match my notebook's screen giving me a native, single-monitor configuration. As soon as I disconnect (and you log back in locally), the desktop un-blanks and the resolution resets back to the four physically attached monitors. Again, VNC works and yes I know I can use 5901, 5902...n to attach VNC to a specific monitor as opposed to the entire desktop, but I'm still at the mercy of trying to look at a 2560x1600 resolution on a 1280x800 screen. I'm left with either scaling (everything's too small) or panning/scrolling (it's like playing hide-and-seek with your documents!) SO... anyone know of any Mac-based remote software (client and server) that will let me connect to my Mac Pro and reset the resolution by the client, just like you can in Windows, or am I SOL?

  Read the article

• How to set up a easy-to-use proxy for the whole system with WinXP client and server?

  - by Pekka

  I am working together intensively with a colleague on the Canary Islands. We speak through live messenger and work together using a RDP software. She has frequent problems with connections to certain big-name and small-name sites (amongst others live.com, google.com, gmx.de) very likely to be caused by the spanish provider (the connections simply time out, this has been going on for weeks already). I have been thinking about setting up my computer as a proxy to make these connections work. I have a DSL connection and am behind a NAT capable router that I control. Does anybody know a simple, "one-click" way to transport ALL network traffic through a remote proxy? Without having to set proxy settings for each application that uses the internet? VPN is not an option, because I am behind a firewall that supports protocol 47 and such, but I have never succeeded in getting an incoming VPN connection to work. I can however redirect normal traffic using NAT. A VPN solution that does not need strange protocols would also be an option.

  Read the article

• Make UEFI, GPT, Bootloader, SSD, USB, Linux and Windows work together

  - by user129552

  I like to use the latest hardware and the latest software; thus I have a Laptop (Lenovo X220) with UEFI instead of BIOS an SSD instead of an HDD GPT partitioning scheme instead of MBR USB to boot from instead of optical disks. I need to use both Windows and Linux. I tried to make them work alongside, but I didn't succeed. Most Linux distribution isos don't even really work on UEFI systems booted from USB. (Not even the self-claimed cutting-edge Fedora. I also tried Linux Mint Debian Edition and Sabayon Linux (according to this guide) which did not work. Only Ubuntu worked for me. I first installed Windows 8 which created sda1: Recovery, sda2: EFI system, sda3: msftres, sda4: NTFS Windows. Windows worked without a problem. I then created sda5: linux-swap and installed Ubuntu into sda6: btrfs. After rebooting, I was not presented GRUB2 as expected, but instead my system just booted into Ubuntu. I could no longer access Windows. After fixing dpkg in btrfs Ubuntu, I followed the Ubuntu documentation on UEFI booting. The result left me with a broken GRUB2, but interestingly, when I wanted to select the device to boot from, I was not only presented the internal SSD, an attached USB device, or LAN, but also Grub2 (broken), Ubuntu and Windows. The result is not very satisfying to me. What would I have to do to fix everything? Or differently asked, what operating system should I install at what point given my possibilities and requirements, so that I have a working bootloader in my UEFI GPT system which presents me a working Linux and Windows.

  Read the article

• Windows 8.1 in a VMWare Workstation 10 guest's mouse is missing, but only sometimes

  - by Rob Perkins

  I have VMWare Workstation 10 running on a Windows 7 machine, hosting a k guest OS. Before upgrading to WS 10 I was using version 9, and the Win8 guest OS ran without difficulty or error conditions. Since upgrading and installing the most current VMWare Tools inside the guest after upgrading to version 10, there are circumstances where the mouse pointer is not visible; the mouse position appears stuck at a screen location which is not the center of the virtualized display; and mouse click and scrolling events still get processed. Once this begins happening I have to reboot the host machine to get it to stop. (VMWare Tools 9.6.1 build-1378637 is what the WS 10 software installed) The problem seems to correlate with whether the mouse is captured during Win 8.1's bootup process, before control is passed to the login screen. If I explicitly click the mouse into the guest OS and move it slowly around while the system is booting, then I see the mouse after clicking to lift the first screen and expose the password prompt, and there is never a problem within the guest. If I don't do this during bootup, there is no mouse pointer, with the symptoms listed above. I have tried removing and reinstalling VMWare tools, and the other steps published for "mouse problems" from VMWare's chaotic troubleshooting database. The problem persists. Is there a setting in the virtual machine's configuration which could prevent this behavior?

  Read the article

• USB Virus, "Program too big to fit in memory"?

  - by ApprenticeHacker

  I got an installer for a piece of software via usb from a friend.Now what was weird was that although my friend and I had the same OS, same brand of laptop and I had a newer version (though I don't think this quite matters), the installer was running properly for him but not for me. It just showed a command line window and exited. I ran it via a batch file in which I included "pause" after running it. Here's the screenshot: Later my friend called me and told me that it was the USB that was the problem. It had some kind of virus on it and it corrupted every executable or folder on it , and it renamed all the sub_files inside folders to some weird jargon. He had tried using another USB and the installer worked fine. Now the friend has (unfortunately) gone back to his city and I can't get the installer again from him. My question is: Is there any way to repair the installer executable and run it? and Do you think the virus has infected my PC? (I have run a system scan with my antivirus and it showed nothing but still I'm worried)

  Read the article

• How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

  - by Maharshi Raval

      I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

  Read the article

• How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

  - by Maharshi Raval

      I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

  Read the article

• Disk wipe preferences

  - by hmvm123

  I manage a pool of systems that are loaded with software and sent to potential customers for evaluations which often land sensitive information on the drives. Before shipping them back, they typically like a standard wipe to be run to clean out the drives. Most are familiar with DBAN so I try to make sure it can work on my systems. Unfortunately, this means I'm usually in RAID driver hell trying to make sure that the versions out there support the ones my systems are shipping with. These are various kinds of 3ware and LSI ones. Consequently, I have DBAN 1.0.7 working on some, a beta version of 2.0 on the others and 2.2.6 on some of the latest SSD based ones. Now with the LSI controllers on my IBM x3550 M3s (1064/1068) I'm getting no love at all. Is there a way out? Do you buildroot with DBAN and try to piece the drivers together? Any other tools, free or commerical, that stay updated. I'm trying to walk people of varying technical proficiencies through this, so a boot disk with simple choices is preferable.

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Weirdly high ping on direct ethernet connection?

  - by Antriel

  I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

  Read the article

• Are there compact external USB audio interfaces which are better than a on-board sound?

  - by rumtscho

  I am asking this for a friend. He loves his voice recognition software and dictates a lot of text using a headset. Now he has a new laptop, which only has a combined mic/headphones output, and wanted to buy an adapter. I told him to get an external USB sound interface instead, as the better sound quality will probably increase the hit rate of the voice recognition. He agreed, but when he saw a picture of the SoundBlaster X-Fi, he said that it is way too big, because he wants to carry the thing everywhere. He'd rather have one of these small things which are the size of a flash memory stick, with only one mic and one phones output, period. Now I am not sure whether these mini interfaces would produce a sound better than onboard sound. They all seem to come not from established audio interface manufacturers, but from electronic accessories manufacturers like Speedlink, or just noname brands. Is there a compact audio interface with good A/D quality (it is OK if the price is comparable to that of the bigger interfaces, even if there is no additional functionality like Chinch in-/output etc)?. And if there isn't, will the noname soundcardsticks offer any advantage over a simple adaptor for the onboard sound?

  Read the article

• keyboard intermittently stops working, even after reinstalling windows 7; possibly a Chrome issue?

  - by neverskipbreakfast

  My keyboard intermittently stops working. Sometimes a couple of keys will work, but usually none. Sometimes if I mash a couple of the ctrl+alt+windows type keys randomly for a bit, the keyboard will let me type one more letter before stopping again. Sometimes the keys will open a program menu, but usually not. I have even completely wiped my machine and reinstalled windows 7; the problem continues. Specs: Intel iMac (early 2006, 2.0GHz, 2MB RAM, 240GB HD) running ONLY Windows 7 Professional, 32-bit (NOT through boot camp) and using a USB keyboard (Saitek Eclipse II.) *Unplugging & reconnecting keyboard does NOT fix it. *Connecting a different keyboard does NOT fix it. That one won't work, either. *Drivers are up-to-date. Removing and reinstalling drivers does NOT fix it. *Restarting the computer does NOT fix it. In fact, when the Windows logon screen appears, they keyboard won't work, and neither will the icon to pull up the on-screen keyboard. Otherwise my mouse can click around just fine. I can only log onto a non-password protected account. *Generally, logging into as different Windows user fixes it. I can then log back on to my main user account and continue work for a few hours until it happens again. *Clearing my Chrome browsing data stopped the problem from recurring for a week or so. *I use Avira free antivirus software, and repeated scans turn up nothing fishy. *I have already REINSTALLED Windows 7 (not just a restore.) The problem returned after 2 days of use. The only thing I suspect is something in Google Chrome -- I used my google account to reload all my previous Chrome extensions, saved data, etc. (Chrome Extensions Installed: AdBlock, Better Google Tasks, DropBox, FB Photo Zoom, Google Mail Checker, StayFocusd.) Any ideas? Any at all?

  Read the article

• Cloning a NAS drive which hosts a SQL Server DB

  - by Adrian Hand

  We have a system in the field running a server application which is suffering with major performance issues. The system in question has 2 onboard 300gb sas drives in RAID 5 from which it boots Windows Server 2003, and a 6tb buffalo terastation NAS unit (also RAID 5) to which the server app does all of its reading and writing. I believe the terastation is the source of all our woes. Whilst under load, reads and writes tick by at something of the order of 1meg/sec, though the network in question is hardly utilised. The terastation contains various data, but crucially hosts a full instance worth of SQL Server .mdf and .ldf files (master etc - the whole shooting match) I wish to stop all the services on the server, then take everything on the terastation and essentially clone it to some alternative onboard storage, so as to eliminate the terastation from the equation as far as poor performance is concerned. ie the terastation is currently drive D: - I want to copy everything off and then have the duplicate assume the drive letter so that as far as the software is aware, nothing is different. This is tricky because of the mdf and ldf files - everything else will work with a straight up file copy. Can anyone suggest a means to achieve what I am describing? Many thanks!

  Read the article

• Tables in the SQL Server "master" database, will they cause problems?

  - by pepoluan

  Folks, please be kind on me... I'm just an 'accidental' DBA due to our DBA resigned, so I'm totally a newbie in DBA... You see, I have this application, "ESET Remote Administration Server" (ERAS) that stores its logs and analysis on (originally) a local Access database. The decision was to migrate its database to a SQL Server 2008 R2 machine. ESET (the maker of the software) helpfully provided tools to perform such migration; unfortunately, being the DBA neophyte that I am, I didn't realize that I have to first create my own database (on the SQL Server side) and assign that database as the 'default' database for ERAS' ODBC connection. Now, the migration tool had successfully created a whole bunch of tables inside the "master" database. My questions: Should I leave things be as it is, or should I re-migrate the ERAS database to a different database? If you suggest me perform a re-migration, my plan is to (1) create a new instance, (2) create a new database within the new instance, (3) create a new ODBC System DSN on the ERAS server pointing to the new DB in step 2, (4) use ESET's migration tool to migrate from the current DSN to the new DSN. Do you think I missed a step there? Thanks beforehand for any guidance.

  Read the article

• creating a backup system with freenas

  - by masfenix

  We are currently in the process of opening a new accounting firm in the new year (actually moving from our previous location). I am looking for a cheap/free solution to back up our files (small, text files couple of kb). I was impressed with FreeNas and Windows Backup but I found out that Windows Backup only saves for a maximum of 2 years. The work machines will be running Windows 8 or Windows 7. There can be many work machines however we have only one to start with (ie, think of it as just one employee). I have an old core 2 duo with 2 gigs of ram that I can convert to a server if need be. I want the syncing to be done through LAN since the data is confidential and should never touch the outside world. So ideally, I would like the following scenario: A skydrive/dropbox like service to sync my client files over work machines and a central server. The "server" part should store history of files (i don't know how this will be done since the file will have the same name?). This isn't really necessary, but I can see it become useful. I am not familiar with RAID, so does any software RAID solution exist? I will most likely be buying 2 hard drives.

  Read the article

• Incorrect durations mp4 file created by ffmpeg (avconv)

  - by Ruslan Sharipov

  Example usage: avconv -i rtmp://maps.lo.ufanet.ru/live/10e227922b473e91f37474fa084107af -vcodec copy -an -sn -map 0 -f segment -segment_format mp4 -segment_time 60 -y %05d.mp4 avconv version 0.8.3-6:0.8.3-1+b1, Copyright (c) 2000-2012 the Libav developers built on Jun 15 2012 13:54:35 with gcc 4.7.0 HandShake: client signature does not match! Metadata: height 480.00 remote_addr: sdp_session {sdp_session,0, {sdp_o,"-","1289703354974145","1289703354974145",inet4, "10.1.12.99"}, "Media Presentation", {inet4,"0.0.0.0"}, {0,0}, [{"control","*"},{"range","npt=0.0 start 30400239.52 timeshift_duration 319250.58 timeshift_size 120000.00 width 640.00 [flv @ 0x1d36a40] Estimating duration from bitrate, this may be inaccurate Input #0, flv, from 'rtmp://maps.lo.ufanet.ru/live/10e227922b473e91f37474fa084107af': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0.0: Video: h264 (Baseline), yuvj420p, 640x480 [PAR 1:1 DAR 4:3], 1k tbr, 1k tbn, 2k tbc Output #0, segment, to '%05d.mp4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuvj420p, 640x480 [PAR 1:1 DAR 4:3], q=2-31, 1k tbn, 1k tbc Stream mapping: Stream #0:0 -> #0:0 (copy) Press ctrl-c to stop encoding ^Cframe= 9566 fps= 36 q=-1.0 Lsize= -0kB time=318.25 bitrate= -0.0kbits/s video:30348kB audio:0kB global headers:0kB muxing overhead -100.000071% Received signal 2: terminating. Result: serafim@yard:~/video2$ ls 00000.mp4 00001.mp4 00002.mp4 00003.mp4 00004.mp4 00005.mp4 Now try to play the files in the player, such as VLC. And that's what we get: the first fragment (00000.mp4) played well, no problems, but the second (00001.mp4 and beyond) starts the bug manifests itself, namely the file 00001.mp4 first 60 seconds black screen, but since 61 seconds starts playing the video. Attachments: https://dl.dropbox.com/u/760901/rtmp_and_mp4.zip How to get rid of the delay with black screen at the beginning of the segments? Maybe ffmpeg to pass parameters, or third-party software is able to correct the obtained segments mp4?

  Read the article

• Power issues Foxconn Barebones kit

  - by alpha1

  I have a Foxconn R20D2 bought about a year and a half ago. It ran fine for a while and then around last summer it started having power issues. I chalked it up to changes in electric current due to the overwhelmed grid when people turn on their AC units, but this problem has stayed for all year, shutting off randomly, shutting off when i turn on a vacuum and similar problems. Now that its summer again, the box basically sits there all day cycling itself, and now has gotten to the point it tried to boot and after 3 seconds, fails, shuts off and tried again. I know its power related, it runs opensuse linux and there are never any shutdown logs or anything of that sort. As the weather got hotter i noticed it happening more and more, and it most often happened in the morning, i presume as people woke up and turn on the AC. The power supply is a Chennel well technology co LTD model DSL-150. 150W max output. Its an intel atom dual core, with 2 sata drives, no CD/floppy etc, recently upgrades from 2 to 4gb of ram. It runs at 104 degrees Fahrenheit all the time almost. Any way i can test the power supply or anything else to try to fix it? Im a software guy, not hardware so im at a complete loss here, thanks for all assistance you can provide! EDIT: The switch on the back that says 230 or 115 is set to 230. If im in the USA, could that be causing the problems?

  Read the article

• How do I fix error 1303 during TI Connect install?

  - by smoth190

  I recently purchased a TI-84 Plus graphing calculator, and I'm trying install the TI Connect software in order to connect the calculator to my computer via the USB cable. Unfortunately, I'm getting this error while trying to install the program: Error 1303. The installation has insufficient privileges to access this directory: E:\Data\Timothy\Documents\MyTIData. The installation cannot continue. Log on as administrator or contact your system administrator. However, my account is the only account on my PC, and it has administrative privileges. I've also tried running the installer with Run as Administrator, but with no luck. If I create the folder MyTIData manually, I receive this error: Error 1317. An error occurred while attempting to create the directory: E:\Data\Timothy\Documents\MyTIData I've reapplied the security settings to the E:\Data folder (and all its sub-directories) to Full for my account. I've also gone into Computer Management, and given SYSTEM full privileges for the entire disk. I've also logged out, logged back in, restarted, etc. but still, no luck. Now, I should mention that my Documents folder is not at the default location. I changed it due to my C: disk being a 90GB SSD, so I moved all my personal data onto the extra storage disk (which is ~1TB). I don't know if that is causing the issue, but it can't hurt throwing it out there. So why can't I install this program? Google'ing the problem brings up this error for various other installers (such as Visual Studio and Microsoft Office), but nothing for TI Connect. All the solutions are the same: Give the folder Full privileges...but I've already done this! I've also tried running the installer with and without the calculator plugged in, but it didn't change anything. In the prompt that contains the error, repeatedly clicking Retry or waiting a few moments before clicking Retry also produces no result.

  Read the article

• Does my Oracle DBA need root access?

  - by Dr I

  I'm currently discussing with my Oracle DBA Collegue that request a root access on our production servers. I'm not so hot to let him use the root access on our production servers. He is arguing that he need it to perform some operations like restarting the server and some other obscure arguments. The point is that I'm not agree with him because I've set him a Oracle user/group and a dba group where Oracle user belong. Everything is running smoothy and without any root permissions for now. I also think that all administrative tasks like scheduled server restart and so one need to be operated by the proper administrator (The Systems administrator on our case) to avoid any kind of issues related to a misunderstanding of the infrastructure interactions. So, I need the help of both, sysadmins and Oracle DBAs to lead me on the correct direction. If my collegue really need this rights I'll give him, but I'm just basically quite affraid of that because of security and integrity concerns. I know that my collegue is really good as a Oracle DBA and he know is work very well, but I also know that I've very few cases where a software and its admin really need root access. Once again, I'm not looking for pros/cons but rather an advice on the way that I should take to deal with this situation.

  Read the article

• Thomson router reboots unexpectedly with an apparent remote connection attempt

  - by ChrisF

  I've got a weird problem. Every so often my rooter (a Thomson TG585 v8 running version 8.2.7.8 of it's firmware) reboots itself. It seems to be associated with this message in the event log: FIREWALL replay check (1 of 2): Protocol: ICMP Src ip: 183.178.144.177 Dst ip: xxx.xxx.xxx.xxx Type: Destination Unreachable Code: Host Unreacheable xxx.xxx.xxx.xxx is my external IP address 183.178.144.177 resolves to 183178144177.ctinets.com We've got a student from Hong Kong staying with us at the moment and the reboots seem coincidental with him starting up his laptop. I say this because a check on ctinets.com shows it to be based in Hong Kong, though our guest's laptop doesn't appear to have any software related to this company installed. I say "apparently" as he is running the Chinese version of Windows and his English doesn't cover technical subjects like this. I know this is an incoming message but I was assuming that it was in response to something on the student's laptop which is why the first thought was malware, but we've got anti virus on all the other machines and have run malwarebytes on his with a negative result so I don't think the problem is due to a virus or (known) trojan. What else can I do to stop this and identify the cause?

  Read the article

• How to encourage Windows administrators to pick up scripting?

  - by icelava

  When I worked as an administrator in my first job, I was frustrated that our administration processes with Windows servers were a series of point-and-clicks; we could never match the level of efficiency with the Unix servers which had a group of shell scripts to automate a lot of the work. I soon read about WSH and ADSI and wasted no time learning just how much automation I was able to achieve with scripting. There was a huge problem though - almost none of my Windows colleagues were really interested in learning scripting. They seemed happy with the manually mouse-clicking chores and were never excited at the prospect of using scripts to do the work on their behalf. I struggled to convince them to pick up scripting skills despite the evident increases in efficiency. I left that job in pursuit of a full-time software development career thereafter. Almost a decade on working in various environments and different customers, I still encounter Windows administrators mainly possessing this general "mood" where they would avoid scripting as much as possible. Despite the increasing level of accessibility Windows server technologies are opening up for scripting and automation. I am almost certain the majority of administrators are administrators precisely because they absolutely hate performing any kind of programming duties. What are some means to encourage and motivate administrators that scripting can really help them in the long run?

  Read the article

< Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >