Search Results

Search found 59196 results on 2368 pages for 'no time'.

Page 705/2368 | < Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >

• UPS power requirements for server

  - by captainentropy

  Greetings! So, I just placed an order for a new server. The company recommended that I get a 3000W UPS. (!) As best as I could I calculated the following wattage consumption based on benchmarked data or datasheets provided by the manufacturers of each component: number watts **total watts** MoBo 1 240 240 CPUs (E5540) 2 80 160 RAID cards (3ware) 2 18 36 RAM (6x4GB) 6 3 18 DVD drive 1 7 7 floppy 1 2 2 RE4 drives 8 7 56 WD20 drives 8 6 48 Intel X25 SSD 2 0.15 0.3 total = 567 So that is for the PSU requirements only. The PSUs in the machine are a 720W for the master node and 800W each for two subsystems. That's a total of 2320W that can be delivered by these PSUs. But that is 4X the amount being consumed, at most, by the components. I didn't count case fans or the eSATA card (3W maybe?) or what the PSUs themselves require but assuming I double or triple my calculations I'm not even remotely close to the 3000W UPS I was suggested to get. They run at least $1100. I could get a 2000W for about $750 or a 1500W for $450 and still be well over my estimated power need. I don't think I need a whole lot of run time in the case of a power outage, maybe 20 minutes max, enough time to shutdown if the power doesn't come on within 5-10 minutes. Any thoughts? Am I off on my calculations? Did I overlook something major? If so what are your suggestions for a UPS? Thanks!

  Read the article

• Pivot Table grand total across columns

  - by Jon

  I'm using Excel 2010 and Power Pivot. I'm trying to calculate confidence and velocity for a development team. I'm extracting some information from our time and defect system each day and building a data set. What I need to do with Excel is do the calculations. So each day I add to my data set 1 row per task in the current project, estimate for that task and the time spent on that task. What I want to calculate is the estimate/actual for each task but also for each person. The trouble is that each day the actual is cumulative so I need to pick out the maximum value for each task. The estimate should remain unchanged. I can make this work at the task level with a calculated measure (=MAX(worked)/MAX(estimate)) but I don't know how to total this up for a person. I need the sum of the max worked for each task. So a dataset might look like: Name Task Estimate Worked N1 T1 3 1 N2 T2 3 1 N3 T3 4 1 N1 T1 3 2 N2 T4 5 1 N3 T3 4 2 N1 T5 1 2 N2 T6 2 3 N3 T7 3 2 What I want to see is for task T1 2 days were worked against an estimate of 3 days - so 2/3. For person N1 I want to see that they worked a total of 4 days against an estimate of 4 days so 4/4. For person N2 they worked 5 days for an estimate of 10 days. Any ideas on how I can achieve this?

  Read the article

• why is Mac OSX Lion losing login/network credentials?

  - by Larry Kyrala

  (moved from stackoverflow...) Symptoms So at work we have OSX 10.7.3 installed and every once in a while I will see the following behaviors: 1) if the screen is locked, then multiple tries of the same user/pass are not accepted. 2) if the screen is unlocked, then opening a new bash term may yield prompts such as: `I have no name$` or lkyrala$ ssh lkyrala@ah-lkyrala2u You don't exist, go away! Even when our macs are working normally, everyone here has to login twice. The first time after boot always fails, but the second time (with the same password, not changing anything, just pressing enter again) succeeds. Weird? Workarounds There are some workarounds that resolve the immediate problem, but don't prevent it from happening again: a) wait (maybe an hour or two) and the problems sometimes go away by themselves. b) kill 'opendirectoryd' and let it restart. (from https://discussions.apple.com/thread/3663559) c) hold the power button to reset the computer Discussion Now, the evidence above points me to something screwy with opendirectory and login credentials. Some other people report having these login problems, but it's hard to determine where the actual problem is (Mac, or network environment?). I should add that most of the network are Windows machines, but we have quite a few Macs and Linux machines as well, but I'm not sure of the details of how the network auth is mapped from various domains to others... all I know is that our network credentials work in Windows domains as well as mac and linux logins -- so something is connecting separate systems, or using the same global auth system.

  Read the article

• What XMonad Configuration Best Replicates Default Ion3 Behavior and Feature Set?

  - by mtp

  Not being very familiar with Haskell and lamenting that Ion 3 is now abandonware, I am curious if anyone out there has found a way of replicating the default Ion 3 behavior and aesthetics in XMonad. If I can't have a near-exact replica of Ion 3-style behavior in XMonad, here is what would be critical to me: Virtual desktops that are empty by default and that spawn full-screen applications, which can be split horizontally or vertically evenly, leaving an empty adjacent pane. The panes, which house open windows, are manually resizable, preferably via keyboard. The panes exhibit tabbed behavior, meaning that they can house multiple windows. Windows can be tagged and moved between panes / virtual desktops via keyboard sequence. A given window may be temporarily exploded into full-screen mode via keyboard sequence. Each new virtual desktop starts in the same state—i.e., with one pane. Each virtual desktop may have its panes divided independently of other virtual desktops. From my investigation, it appears that there are several configurations that provide #3. For as much as I want to spend the time to familiarize myself with Haskell, I just simply don't have time. Any suggestions would be greatly appreciated. As far as I can tell, Ion has no conception of master pane or window, so this behavior is not desired.

  Read the article

• TOR Proxy / Vidalia "New Identity" button not working

  - by Yisman

  I need to hide my ip from time to time. In Vidalia, I click on "New Identity". Ihen I check http://myip.ozymo.com/ to see if my IP address has changed. But, no, it hasn't. Why is that? And how can this be fixed? I tried waiting till the button gets re-enabled to make sure that its done processing the command, but still the IP address is the same. In Fiddler each request is tracked, so it's not a cached response. It's re-requested, but simply does not change. Fiddler though does show one thing interesting. Here is the raw response of many of the requests: HTTP/1.1 200 OK Content-Length: 13 Date: Mon, 23 May 2011 12:02:57 GMT Server: Apache X-Powered-By: PHP/5.2.14 Content-Type: text/html; charset=UTF-8 Age: 1 Connection: keep-alive **Warning: 110 localhost:8118 Object is stale** 26.32.120.106 What is this warning? And is this the cause?

  Read the article

• Creating a bootable USB drive from a distro split over two DVD ISOs

  - by Kev

  I am searching and not finding the right way to do this. Please note, I don't think I'm trying for anything strange here. I just want to make a bootable USB stick of a single OS that happens to be larger than one DVD and happens to be larger than FAT32 will allow for in a single file. On our slow connection I spent a long time downloading CentOS 5.9's two DVD ISOs: CentOS-5.9-x86_64-bin-DVD-1of2.iso (4.4 GB) CentOS-5.9-x86_64-bin-DVD-2of2.iso (718 MB) I have a USB stick that I want to somehow get these two ISOs on. Since the first one is 4.4 GB, I can't use ISO2USB because it insists on FAT32. I cannot find an alternative that lets you specify more than one ISO image--of the same distro, I'm not trying for some fancy multi-boot thing--to put on the same stick. I guess I should have downloaded the CD ISOs, but I thought I was "saving time" because then I wouldn't have as many files to run through the md5 checker. There's no IMG file of the whole thing (only a net install version, which I don't want--I want to pre-download everything) otherwise I would've gone for that. So, given that I have these two DVD ISOs, how can I get them on a stick that will boot and make use of both of them properly to install CentOS somewhere? Again, I don't think this is anything out of the ordinary, yet I can't find software/docs that seem to support this. Am I stuck re-downloading everything in CD-sized ISOs just to do this? I found this, but it doesn't run on Windows. I am using Windows to prepare the stick.

  Read the article

• Does this mean the router is faulty?

  - by Ashfame

  I have a router to which I have my desktop (running Ubuntu) connected via LAN & I use it on my phone via wifi. Sometimes it happen that the LAN one will stop working for no reason but the wifi will work fine. And it will resolve away by itself. Since last night, the router was restarting again & again on its own, so I lodged a complaint about it and they said the router is faulty and will be replaced, but I know they don't know anything about how things work & is just going to shoot an arrow in the dark. These restarts has happened for the first time, LAN-wifi issue described earlier is a common one (but not frequent one). So is the router faulty or there is some issue from my ISP side which will continue to persist even after they change the router? My very best guess is that they will replace it with an older refurbished router which will tend to give me more troubles in the coming time, so its better if I change it only its faulty (this is a new one - 6months old, I am its first hand user). I am happy to provide any details.

  Read the article

• How to determine the root cause of a system lockup on Ubuntu 8.04 LTS?

  - by jdt141

  I'm currently working a project that involves setting up a PC/104 stack and running Ubuntu 8.04 LTS. We need to use the PC/104 stack because its an embedded application - and we're required to use a DeviceNet peripheral card to communicate to other devices. (DeviceNet is just a protocol on top of CAN.) Anyway, the following hardware is on the stack: Kontron MOPSPM104 with a 1GHz Intel Celeron processor ConnectTech FlashDrive/104 4GB Industrial Temp (-40 to +85 C) Woodhead (Molex) PC104DVNIO DeviceNet card A run of the mill 104 power supply The Kontron Board offers two serial ports, one VGA out, and two USB ports. The DeviceNet card is an ISA card. Because of this (per the User's Guide for the Kontron Board), I have manually set the IRQs in the BIOS to be appropriately configured, and turned off ACPI in both the BIOS and passed the appropriate flag in GRUB. I've installed Ubuntu 8.04 desktop, 32 bit. The problem that I'm having is that, from time to time, the entire 104 stack locks up. This only seems to happen in two cases, both of which we're running GNOME. We have a custom application that uses the DeviceNet card, and the system will lock up, or (more frequently) when we're running Firefox and either surfing for some information or trying to test it - typically by streaming video from a IP-camera. The reason I ask this questions is I cannot determine the root cause of this lockup. The IRQs appear to correctly configured in the BIOS and as the Kernel sees them, and nothing is logged to dmesg. If you all could help me determine the root cause of this lockup, I would greatly appreciate it. Thanks.

  Read the article

• Windows 7 - All Icons Missing, Explorer Progress Bar Never Finishes, Libraries Gone

  - by Alex

  since yesterday i've had three issues which all arose at the same time. windows 7 x64, i7 2.8ghz 12gb ddr3 1 - my libraries, favorites, drives are missing...basically the entire sidebar is gone. http://i.imgur.com/m8pRQ.png. yet when i open a dialog, my libraries and drives are back to normal ONLY for the dialog. i tried Restore Default Libraries. it works one time, but when i open libraries again i go back to the empty mess. restarting the computer temporarily fixes the problem. 2 - in the explorer window that's showing libraries, when i navigate to a certain folder i get an unending progress bar (the kind that turns the address bar green). yesterday when the problem started, i was saving a file to this folder. the program writing the file crashed during the write and i believe that's what caused the problem. i have sugarsync backing up that folder and when i restarted the computer sugarsync informed me that its database was corrupted, so i had to uninstall and reinstall the software. 3 - icons are missing. the Rebuild Icon Cache did not fix this. http://i.imgur.com/r9pgo.png restarting the computer temporarily fixes these problems, but when i open the directory with the initial write problem, everything stops working. edit: i should note that i did a chkdsk /f and it repaired problems. i also did the thing that verifies then restores windows files (can't remember the command now), which reported that everything was normal.

  Read the article

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

• Synchronize folders on different computers without cloud and without network just internet

  - by theimmortalbg

  I have two computers with windows 7, one in my home town and one in another town. So they are not in private network but I have internet on both. They have exactly the same file structure. I am searching for program that can keep the data equal. I know about dropbox or google drive but they are cloud and I don't want to use them. Also they are using folder that you should copy your data in it. There is another programs that are like a server, just put something and after that you can download it but I dont need them. I want just to point which folders to be synchronized and the program make the synchronization. The sync can be in real time if the two computers are powered, or after few time when they are powered. Or it can lock another computer synced folder till update is required. At all this is my documents that I want to be synced in all my computers and to be changed from where I want. In fact I can move the updates with flash but if some program save the changes and make them on another computer with one click it will facilitate my work.

  Read the article

• Windows XP / Outlook 2003 error messages

  - by AboutDev

  Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

  Read the article

• Best way to troubleshoot intermittent network outages?

  - by Ben Scheirman

  We have a Comcast 50/10 line into our office. We keep seeing very short but sometimes frequent drops in our internet service. It's enough to kick you off of skype and stop any websites from loading, which is obviously affecting our productivity. We've tried 4 different routers, we've tried moving everyone off of wireless and onto wired via a switch and so far nothing has helped. Right now we're on a Cisco SB WRP400-G1 router. Attached to the router is a 16 port switch going to the ports in all of the offices. We've moved to OpenDNS in the case that it was the comcast DNS servers going down. Today we tried putting the modem, router, and switch on a UPS to make sure it wasn't power fluctuations that was causing it. Every time we call Comcast, by the time they are here the internet is working fine. I'd like to somehow prove that the problem is with Comcast, so if that means plugging in a machine directly into their router and collecting data all day, I'm up for that. I just want to hear ideas on what tools to run and how to collect this data. I could just continuously ping google.com all day long but I'm not sure how valuable that data would be. Thoughts?

  Read the article

• Backup Exec tape rotation guidelines

  - by HannesFostie

  Hi We use Backup Exec to take care of our backups for our data server, exchange server, and one more set of systems. Each of these 3 is being done on a separate "set" of tapes. Our goal is to be able to roll back a full 2 weeks, with 1 full backup each weekend and differential/incremental backups in between (the difference between the two in our case isn't very big, because the employees mostly use a very similar set of files throughout the week). While playing around with the settings on how to achieve this, we set the time for BE to keep the full backup to 14 days, but because we have too much data this would require manual intervention each time to erase a certain tape and use that. What I would like to know is what kind of guidelines, tricks, tips and general "stuff to think about" you keep in mind when designing your backup schedule. The type of backups (full/diff/incr) isn't of that much importance in our case as it's more or less set in stone. Made this community wiki as it's not a very specific question. Thanks in advance!

  Read the article

• Windows XP / Outlook 2003 error messages

  - by AboutDev

  Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

  Read the article

• How do you make Google's interface always be in your chosen language?

  - by Michael Wolf

  Google's interface and search results don't always appear in my preferred language, English. I'm located in Mexico City and, although I generally have no problem with Spanish, I would prefer search results in English most of the time. (The exception is when I'm using search terms in Spanish.) I'd also prefer the interface to be in English, but that's far less important to me than search results. Google looks at your IP to decide where you're coming from and thus what language to present results in. So, when I type www.google.com into the URL bar, it redirects me to www.google.com.mx. Is there a way to force Google to use one language all the time? Here are some things I've done and tried: 0) I have a Google account, and I've configured it such that it should know that English is my preferred language. I don't often explicitly log out of Google, so generally Google knows I'm me and my preferences when I access its services. 1) I've configured my browser to ask for pages in English. Very few sites support this feature at all; Google isn't one of them. 2) From www.google.com.mx, I can click on "Google.com in English". This works until, I think, I close the browser. 2a) From www.google.com.mx, I can go into account configuration, which is English. From then on, everything's in English. 3) I can append &hl=en (Human Language = English) to the end of the URLs of result pages. 2, 2a, and 3 all "work", but they're all mildly annoying. I'd rather avoid them if I could. (At the risk of stating the obvious, English and Spanish are the languages I'm dealing with, but I imagine that, say, a francophone using Google from Korea would run into basically the same issue.)

  Read the article

• Converting PDF eBooks into a Kindle format

  - by Ender

  Over the past couple of years I've amassed quite a collection of guides, tutorials and ebooks in PDF format. A lot of these are quite useful for work, especially PDF documentation, and rather than have to be at a computer every time I want to read how to do something in Sitecore or to read through a software testing ebook I'd like to do it on my brand-spanking-new Kindle. However, even though there is now a native PDF reader on the Kindle due to the nature of PDF's they are practically unreadable. The text doesn't wrap due to how PDF's are sized and so far after a bunch of Google searches I've yet to find a viable solution to get my PDF's converted into a readable Kindle format. Sometimes these books have code or pictures/tables in them, but most of the time they're text-heavy and to be honest I'd be surprised if there wasn't a free tool to handle the converting of PDF to one of the (seemingly many) Kindle formats. So, can anyone help me out with this? EDIT: I've tried Calibre, and have checked their forums to play with some of the advanced settings, yet the solutions available seem to be extremely poor, especially if the book you're attempting to read contains equations, code, or anything outside of plain text. I've also tried Amazon's conversion service, which wasn't much help with such documents. The best way I have found so far is to build the entire thing over again in ePub or RTF format and convert to MOBI from there. This works for text-heavy books with tables, but anything technical still isn't covered. Can anyone help with this?

  Read the article

• Why does my microwave kill the Wi-Fi?

  - by Ohlin

  Every time I start the microwave in the kitchen, our home Wi-Fi stops working and all devices lose connection with our router! The kitchen and the Wi-Fi router are in opposite ends of the apartment but devices are being used a little here and there. We've been annoyed by the instability of the Wi-Fi for some time and it wasn't until recently we realized it was correlated to microwave usage. After some testing with having the microwave on and off we could narrow down the problem to only occurring when the router is in b/g/n mode and uses a set channel. If I change to b/g mode or set channel to auto then there is no problem any more...but still! The router is a Zyxel P-661HNU ("802.11n Wireless ADSL2+ 4-port Security Gateway" with latest firmware) and the microwave is made by Neff with an effect of 1000W (if this information might be useful to anyone). There is an "internet connection" light on the router and it doesn't go out when the interruption occurs so I think this is only an internal Wi-Fi issue. Now to my questions: What parts of the Wi-Fi can possibly be affected by the microwave usage? Frequency? Disturbances in the electrical system? How can setting Auto on channels make a difference? I thought the different channels were just some kind of separation system within the same frequency spectrum? Could this be a sign that the microwave is malfunctioning and slowly roasting us all at home? Is there any need to be worried? Since we were able to find router settings that cooperate well with our microwave's demand for attention, this question is mainly out of curiosity. But as most people out there...I just can't help the fact that I need to know how it's possible :-)

  Read the article

• Apache Bench reports different result with same page

  - by Aspis

  I'm running into a little problem base-lining an Apache2/fcgi/php-fpm server I am setting up. 1) If I run: ab -n 15000 http://mysite.com/index.php. Apache Bench returns Time per request: 41ms but document length: 0 bytes and html transferred: 0 bytes. The Transfer rate: 7.9Kb/s. 2) If I run: ab -n 15000 http://mysite.com/ Apache Bench returns Time per request: 83ms along with the accurate document length and html transferred total. The APC cache status reports identical hit counts from both test. Also Apache Bench reports no errors in either case. Overall, no errors on any test sites and all logs are clean, etc. DocumentRoot is set to index.php so I would expect both of these test runs to produced a similar result. My 2 question(s) are: 1) why the discrepancy? 2) which is the correct result? I've seen plenty of results like test 1 posted (with out question) but frankly from my own experience and those of others, accurate testing is hard to come by. Even with out goofy issues like this.

  Read the article

• Advice: USB Monitoring Programming

  - by Kashif

  I need an advice about USB programming in linux. i have to design a USB monitoring program that 'll keep checking usb ports of a linux cent os. as soon as a usb or external hard disk is connected, this program will shoot an email to some specific person about detail of usb (as size, mount on, time). when usb is disconnected, it will again shoot an email to some person with same kind of information. mean while this program will also write logs in syslog/messages with name of programing for easy tracking. Now I want ask that what is best way to develop this program. as I'm new to this field so i know nothing about it? either i should use perl, bash scripting or some other language? I have no idea what is right way to adopt coz this program will keep running all the time to keep a check on usb ports. I know few commands in like lsusb, fdisk (to check attached usb) and df -h (to get detail of usb) but dont know how i can achieve using these commands that i am thinking. also one more thing that in future i also need to modify this program for ubuntu and Citrix XenServer and it should be same everywhere.

  Read the article

• Printer spooler service stop running when sent print job

  - by Hanan N.

  Every time i am sending a print job to the printer, i am don't get any response from the printer, and at the printer job list at the status of the job, i see that there was an Error, but it don't give me any clue on what could be the problem. After some investigation i found that every time that i send the print job to the printer the printer spooler service stops to run, then after a second or two it start again (i think that this behavior is related to the printer spooler settings to rerun it self after it stops). Things that i have tried so far: Remove and Install again the Driver. After removing the driver, i have removed the unnecessary registry keys according to this article from Microsoft, these are: Rename all files and folders in: c:\windows\system32\spool\drivers\w32x86 Remove anything but Drivers Print and Processors: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x86 Remove anything in here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors but: BJ Language Monitor Local Port Microsoft Document Imaging Writer Monitor Microsoft Shared Fax Monitor Standard TCP/IP Port USB Monitor WSD Port Disconnect and Reconnect the Printer. Clean the computer from Viruses & Spywares. Currently i am stuck, i have no more things to try, if anybody know about any kind of solution please let me know about it. Since i am want to keep this post as general problem that relate to the printer spooler, and not just my particular problem, i didn't included inside the windows version & the printer model, they are (although i think that it isn't relate just for that particular model): Windows 7 32bit, HP Officejet 4500 G510g-m (connect to the computer via USB). Thanks.

  Read the article

• Mysql connections hanging in login state

  - by Mark Rose

  Suddenly today, I had an issue with connections to mysql hanging when connecting by IP address (e.g. mysql -h 10.1.248.20), but I could still connection using localhost fine, regardless the user. mysql> show processlist; +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | 1 | system user | | NULL | Connect | 10 | Connecting to master | NULL | | 2 | system user | | NULL | Connect | 10 | Has read all relay log; waiting for the slave I/O thread to update it | NULL | | 37 | unauthenticated user | 10.1.248.3:36694 | NULL | Connect | NULL | login | NULL | | 38 | unauthenticated user | 10.1.248.3:36695 | NULL | Connect | NULL | login | NULL | | 39 | unauthenticated user | 10.1.248.3:36696 | NULL | Connect | NULL | login | NULL | | 40 | root | localhost | NULL | Query | 0 | NULL | show processlist | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ 6 rows in set (0.00 sec) Yes, I realize replication was broken in that output above; that was after I tried restart MySQL (it was an emergency). And as suddenly as things stopped working, they started working again. DNS was working fine at the time. Replication was still working. MySQL was responsive. Does anyone have any idea what would cause MySQL logins from remote IPs to hang suddenly?

  Read the article

• batch copy files with error log on missing permissions

  - by sc911

  Hi *, I'm searching for a tool to batch-copy files, that should support the following points: copy files from a net-share report any errors show errors only or filter log on errors don't stop on an error also report if a file or a folder could not be copied due to missing permissions if possible it should have a queue where new job can be added while copying I tried the following tools: TerraCopy: takes a lot time to just calculate the time and the size of the job and does not report errors due to missing permissions (it doesn't even add those files to the copy-queue) Karne's replicator: does not report errors due to missing permissions xcopy: does a great job when using the right parameters and piping the output to a file (in the German localization xcopy /k /r /e /i /s /c /h SOURCE TARGET>LOGFILE 2>&1 will do the job. opening the logfile in IE will give you a great monitor). but quing jobs it not possible (ok, you can join them all in a batch-file, but you can not queue jobs while another one is running (hm, thinking of a batch-script that loops through a file with the source-target-config...)) to be continued Which tools do you use? Tell me! Thx sc911

  Read the article

• Installing Ubuntu guest crashes Hyper-V host

  - by Grant

  I have a weird problem that I don't even know where to begin diagnosing. Trying to install Ubuntu to a VM locks up the host system! My setup is: Dell R715 server, dual 16 core AMD opteron processors, 96GB RAM Dell MD3600f SAN Server 2008 R2 Datacenter System Center VMM 2012 There are 5 windows virtual machines running that have had no problems. This is the first linux VM I've tried to create. I setup a VM through virtual machine manager, set the CD drive to a Ubuntu 12.04 server x64 iso, and started it up. It boots up the normal ubuntu install menu, but the second I hit enter on "Install Ubuntu Server", I get disconnected. The HOST machine stops responding to pings. So do all virtual machines on it. It locks up entirely - keyboard on the host won't work, mouse won't move, numlock light won't change. There's no blue screen - the host is sitting at the login screen completely unresponsive. I can't find any relevant logs in event viewer after rebooting. What could cause the host machine to freeze like that? It's not a one time occurrence - it happens every time at the exact same point. Thank god this server isn't in production yet!

  Read the article

• All FireFTP passwords gone after auto-update

  - by GitaarLAB

  For the last six months (since the Firefox madness started and they keep on taking control of my PC) I'm terrified to touch Firefox. Problem is however, I've been using it in my business (since once upon a time it was a trustworthy application with useful extensions like FireFTP) and that installation (and plugins) holds four years of information. So Firefox continually deletes my important data (by) messing up (or blocking/or worse: auto-updating) my plug-ins, even crashing my computer as a result. Today Firefox killed FireFTP by (again) autoupdating FireFTP without my permission, and I did my best to disable that nonsense in about:config). Result: none of the (over 100) FireFTP accounts can be logged on to, they suddenly all ask for a password. I do not have the time to to find all of the passwords and reconfigure FireFTP again. How can I undo the mess Firefox created once again? That is, where are the passwords, how do I downgrade? As a side-question, how can I make Firefox behave again? I'm the boss of my computer, not them! How can I once and for-all take back control and completely kill every kind of auto-update feature?

  Read the article

< Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >