Search Results

Search found 2042 results on 82 pages for 'booting'.

Page 75/82 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Windows 8 not shutting down properly

  - by Patrick

  Since installing Windows 8, the computer hasn't been shutting down properly. When selecting to power down, the PC quickly displays the shutting down screen, the monitor powers off, and the computer remains on but unresponsive. After about 5 minutes, the computer will turn off. Upon booting into windows again, I am informed that Windows didn't properly shut down. I'm running a fast SSD, and it's a clean install of Windows 8, so there's no way Windows is taking that time to do some sort of hibernate on shutdown or whatever - not to mention the error when entering Windows the next time. This happens on every shut down. Restart works as expected. EDIT: Formatting again didn't work. Fails regardless of drivers installed. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

  Read the article

• Bootable ISO to USB stick xp quickest method

  - by brux

  My dog took a leak on my PC when I went out (ye funny), now it reandomly restarts - I'm convinced the HDD is failing because the Windows seagate diagnostic program fails on a few tests. I want to run this prior to windows in an attempt to try and recover sectors, the program includes an iso which can be written to cd and booted, but i dont have any cd's. I tried using unetbootin to create the bootable usb from the iso file (SeaToolsDOS222ALL.576.ISO) but it doesnt work. When i boot from the usb hdd unetbootin loads with "default" in the menu. No joy booting though. I checked the usb hdd in windows and all the files are there, extracted from the iso file, wont boot though. Any ideas? Im using windows xp. More info - when the computer restarts (like i just did now) it constantly reaches the end of POST and then restarts in infinite loop. If I pull the power cable out it will get back into windows, the longer i leave it between attempts, the longer I am able to stay in windows until it restarts. i.e if i leave the power cable out 5 minutes it will stay operable for longer than if i had left it out for only a few seconds.

  Read the article

• Installed Memory (RAM): 8GB (4GB Useable)

  - by Mike Bannister

  I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

  Read the article

• Recovering a broken NTFS filesystem?

  - by OverTheRainbow

  A much-needed Windows Update broke a Vista laptop that was running fine until then: After booting up, Windows displays "Please wait..." but it never goes anywhere. I waited for a couple of hours, there is a bit of disk activity, but it didn't work out in the end. I booted with the Vista DVD, chose "Repair your computer" which said that there was nothing wrong :-/ Next, I booted it up with a Linux USB keydrive, and ran Gparted 0.8.1 (which includes ntfsresize v2011.4.12AR.4 libntfs-3g) which displays a bunch of warnings for the NTFS partition where the Vista system is located such as: ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 16 has no FILE magic (0x0) Next, I ran ntfsfix /dev/sda2, which said: Mounting volume... OK Processing of $MFT and $MFTMirr completed successfully. NTFS volume version is 3.1. NTFS partition /dev/sda2 was processed successfully. Next, I rebooted Vista, which did a CHKDSK, before rebooting. But I'm still getting nowhere with "Please wait..." Before I copy the user's data to another host and reinstall Vista from a DVD, does someone know what I could try? Thank you. Edit: In case someone else has the same issue... After the BIOS, hit F8 and choose "Repair your computer", followed by "Toshiba HDD Recovery". In addition to a 1,5GB partition labelled "WinRE", the hard disk contains a second partition labeled "Data" from which the application will fetch a system image and reinstall it in the "Vista" partition. Make sure you copy your data out of the system partition before doing this.

  Read the article

• UEFI boot options gone

  - by user1797930

  I ran into some issues booting Windows after trying to make a complete backup of the disc. After searching for information about some of the error codes, I found advise to change some BIOS settings, but instead I thought I would just "restore defaults" to make sure all settings were set as originally intended. After doing so, all UEFI boot options except for "Windows Boot Manager" are gone. That means, including the CD/DVD drive, so I cannot even boot from a recovery DVD anymore - and as explained, Windows is not able to boot either. Do you have any advice? When I added a secondary drive originally, it was automatically added to the boot options menu. Even when removing and re-adding the drive physically, the option does not appear again. I have tried unplugging power, and hold down start button for 10 seconds, and boot afterwards - no change. It's a laptop so removing CMOS battery is not an option. I have read information that it is an issue with data removed from NVRAM, but I am unable to find a way to recover it. "Add new boot options" requires a path - but the CD/DVD was originally available without any CD's in the drive - so there is no path available to add the drive. I did try to open EFI shell, but it seems not to be embedded in the UEFI/BIOS. It just says "not found". I'm really lost here - any advice is appreciated.

  Read the article

• Non-restored Files Corrupted on System Restore

  - by Yar

  I restored OSX 10.6.2 today (was 10.6.3 and not booting) by copying the system over from a backup. The data directories were not touched. In the data directories, I'm seeing some files as 0 bytes, and getting permission-denied errors when copying, even when using sudo cp or the Finder itself. Some programs, differently, take the files at face value and see no permission problems (such as zip), but they see the files as zero bytes, which would be game-over for recovery. cp: .git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: could not copy extended attributes to /eraseme/blah/.git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: Operation not permitted I have tried sudo chown, sudo chmod -R 777 and sudo chflags -R nouchg which do not change the end result. Strangely, this is only affecting my .git directories (perhaps because they start with a period, but renaming them -- which works -- does not change anything). What else can I do to take ownership of these files? Edit: This question comes from StackOverflow because I originally thought it was a GIT problem. It's definitely not (just) GIT. Anyway, this is to help put some of the comments in context.

  Read the article

• Applications are being opened by IE instead of running normally

  - by Star

  I rewrote the Question to add everything that i tried so far. Many of my applications are being opened by Internet Explorer. (not all) For example when I run Firefox.exe (from shortcut) I get IE run instead, with the following URL http: // %22d/ Browser/firefox.exe%22 (I added spaces to prevent link creation) the shortcut target is: "D:\Browser\firefox.exe" when I attempted to open firefox.exe from it's folder the results were the same as the previous one I attempted to open it by cmd, so i navigated with cmd to the FF path then wrote: firefox.exe the was the same except that the URL was: http: // Firefox.exe/ when i jsut write firefox the result URL was: http: // Firefox/ (is it some kind of parameter or something??) trying the same with chrome resulted the same results as the previous tests. I tried creating a new user (adminstartor) but the problem still there. I tried every registry key with exe on it (not sure if i tried them all) no change I tried removing IE but came back by itself somehow, meanwhile IE is removed, FF and its fellow apps gave me open with window I tried reinstalling the applications but it just no use. Time Line: (as requested from @Daredev) I don't know when it happened because the computer is for the company i work for and it was like that since i got it. (The IT there gave up on the problem lon time ago!). applications were installed already are "firefox" and "XPS viewer" . applications were working after the problem everything except what uses browsing (MS help viewer, XPS viewer, firefox-even I've re installed it-, opera, chrome) that what I thought but after installing Maxthon , comodoDragon this theory was blown away. system info: 1- windows xp professional service pack 3 2- system fully patched: Yes 3- anti-virus up to date: Yes 4- same behavior when booting into safe mode: Yes

  Read the article

• Windows 7, Black screen with cursor, impossible to logon

  - by PJC

  First - I have gone through as many possible solutions I've found here and elsewhere. [Edit - to describe the issue in more detail, the PC appears to boot correctly, but instead of the logon screen, I have been getting a black screen WITH the pointer cursor, and it responds correctly to the mouse. Pressing CTL-ALT-DEL brings up the logon screen's background, but with no logon area nor any other content. This screen was at the full resolution before I uninstalled the graphics driver in safe-mode.] I also just ran a full up-to-date AVG scan from boot media. [Edit - the AVG scan, which was updated to today's virus signatures, found no issues at all.] So - steps I've tried: Safe Boot, Restore from before the issue - done, no help. Uninstall the graphics driver - done, now i have a 1024x768 fallback screen, still no way in. sfc /scannow - only doable from Safe boot obviously, but no change. [Edit - booting from restore media, performing a startup repair and...]Restore further back - restored to 2 days ago, and I'd had many reboots since then with no problem. Enable autologin to try to get beyond the login screen - done, doesn't work. It seems the best advice is complete reinstall, but I really don't want to do that because it'll take 3-4 days to add all the apps I use. Some key points to note - in both states - before and after removing the video driver, I always had a mouse cursor on the screen. CTL-ALT-DEL flashes up the login background, but no login info. I can (and often do) reinstall from scratch, but was at a fairly stable state before this, and would prefer not to. -Paul

  Read the article

• Ubuntu loading stops ?

  - by joxnas

  I don't know why, or how... but my ubuntu's loading / booting stops right after the ubuntu logo appearing.. An underscore appears in the right top of the screen: _ then, it disappears leaving the whole screen black Version is 9.10 ,Kernel is .20 I have tryed recovering mode and selected recover damaged packages option, but it didn't do any good.. I have very important files in Ubuntu that I need to copy to a pen drive or something, today.. The terminal mode is working, so i think i can do this there.. My questions: How can I get my Ubuntu to load? Is it possible to copy the files i need via terminal mode? I dont know if with other of the previous kernels it would work... but I had configured my grub (inside Ubuntu's gui) to show only the last kernel... and now i can't select any other kernel then .20 because I don't know a way to configure Grub unless via Ubuntu's gui... My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core duo 4Gb DDR2

  Read the article

• trying to setup multiple primary partitions on ubuntu linux [migrated]

  - by JohnMerlino

  I currently have ubuntu desktop installed on a harddrive. I want to partition the harddrive so that I can reserve 30 gigs for ubuntu server and 30 gigs for ubuntu desktop. The drive has 300 gigs available. Right now I am booting from dvd drive and installing ubuntu server. I selected "Guided partitioning" and created a 30 gig primary partition of Ext4 journaling filesystem, set "yes, format it" for format partition and set bootable flag to on. I intend to use this 30 gig partition to hold ubuntu server and allow me to boot from it. Now I have two other partitions. They are both set to "logical", one is currently using 285.8 gigs and is using ext4 (when I try to set bootable flag to true, it gives a warning "You are trying to set the bootable flag on a logical partition. The bootable flag is only useful on the primary partitions"). More alarming it says "No existing file system was detected in this partition". Actually, Im thinking that this is the parittion that is supposed to be holding my current Ubuntu Desktop. And of course I want this to be bootable and be a primary partition, so I could dual boot from this and the server partition. Now the third partition is also set to logical and it is being used as swap area. My question is regarding that second partition. Its supposed to be a primary partition thats holding my existing ubuntu desktop edition. How do I switch it to primary and to make sure that its pointing to my existing desktop installation?

  Read the article

• Burning Linux ISO to DVD and making it bootable.

  - by toc777

  Hi everyone, I just downloaded the Fedora 14 Live-Desktop ISO and used CDBurnerXP to burn the image to a DVD. For some reason the first time I burned the image nothing showed up on the DVD when I accessed it even though CDBurnerXP said it had successfully burned to the disk. I did it again and the ISO shows up on the disk (I don't think this is right, should it be the files inside the image that show up on disk or the image file??). The problem now is my dell PC can't find the ISO when I try to boot from it. I get an error saying it can't boot from the CD. I have verified the ISO image as directed from the Fedora website. My question is how do I make a bootable CD from a Fedora Live-Desktop ISO? How can I verify that the ISO was written to the CD correctly and has anyone had any issues booting from a CD using a Dell desktop (I'm not at home at the moment so I can't check what model it is but its old enough, I've had it for about 5 years). EDIT: All that needed to be done was to burn the image to CD as an image and not a data file. The first three times failed, I'm not sure if this was because of faulty DVD's or if the write speed was too high (16x). I put in a new DVD and changed the write speed to 8x, the image was then properly burned to the disk without any errors. Thanks.

  Read the article

• Multiboot USB (OSX only): How to customize partition name?

  - by wrk2bike

  Trying to deal with all the Mac OSX recovery disks I've got by moving them to bootable USB images. I've got a big USB drive with multiple partitions for each recovery disk, and it's easy to use Disk Utility to "restore" the recovery DVD to a partition. When I boot my target Mac while holding down the Alt key, I can see all my bootable images and they work great. Problem is, they've all got the same name: "Mac OS X Install DVD." I manage Macs of various vintages. If my target Mac needs 10.6.3 for example, my only option seems to be to try each one until I get past the "Mac OSX can't be installed on this computer" message. I originally named my partitions with the OSX revision number, but that name is replaced by the disk image name during Disk Utility restore. Is there any way to customize the name during or after Disk Utility restore? I tried making a new DVD image on disk first and renaming it, but when I restore it to my recovery partition it has the original name. EDIT: After booting to the wrong partition, and getting the "..can't be installed" message, I can open the Startup Disk menu and see the other partitions - and as I select each one, the info at the bottom indicates which OS revision is on that partition. So I know the info is in there! Just want it at the boot screen if possible.

  Read the article

• Python 2.7 and Ubuntu 10.10: X11 fails

  - by c.a.p.

  Against every recommendation I have apt-get remove python in Ubuntu 10.10 (build 2.6.24-29-server x86_64) and apt-get install python2.7 Some built-in software with python2.6 dependencies (like firefox, other minor stuff) was fixed just by apt-get reinstalling or reinstalling from source and the system was stable for one day until I rebooted. Upon booting I got the message "ubuntu is running in low-graphics mode" I have an NVIDIA Quadro NVS 295 256 running on a HP Z600 Workstation so I sudoed: apt-get --purged nvidia* apt-get --purged xserver apt-get install linux-headers-generic apt-get install nvidia-* apt-get install xserver-xorg dpkg-reconfigure xserver-xorg nvidia-xconfig upon rebooting i get the same "ubuntu is running in low-graphics mode" if I decide to tell the boot menu to restart X, the Ubuntu 10.10 "load screen" shows up and does not do anything for hours. If I "X" the screen remains black for hours; ctrl-c shows that /etc/X11/xorg.conf did not produce any errors just a warning "Type "ONE_LEVEL"...". /var/log/Xorg.0.log issues the following warnings (no errors) (WW) AllowEmptyInput is on (WW) NVIDIA(0): UBB is incompatible If I "startX" I get /usr/bin/python: can't find '__main__.py"' in '/usr/share/command-not-found' Before re-installing xserver-xorg however "startX" ran, just by changing the resolution of the tty1 console. Any hints?

  Read the article

• How can I assign DHCP leases from a script?

  - by devicenull

  I have an environment where there is one DHCP server servicing a number of different hosts/vlans. The switches are configured to forward the DHCP requests over (via ip-helper) and include information about the port (option 82). I'd like to take that information and translate it into an actual lease for the server. I don't think it's particularly feasible for me to pregenerate a list of available leases, but I should be able to determine an address for a lease as it comes in. Is there an DHCP server that can execute a script when it receives a request? (Note: I'm looking to assign the IP from the script, not have the DHCP server assign an IP then execute the script) Edit: So, ultimately I'm trying to provide DHCP/PXE services over a large number of distinct vlans. This is so we can do OS installs via PXE booting without having to have a separate PXE vlan. I've got the switch config down no problem, and I have the DHCP server recognizing option 82. I need a way to pull DHCP assignments from another system (this other system would know what subnet to use on what vlan), but I do not want to have to pregenerate a list of vlan:DHCP range pairs.

  Read the article

• Windows 7 clean install becomes corrupt after reboot (repeated many fresh installs)

  - by pjotr_dolphin

  My laptop keeps crashing on boot after clean Windows 7 install. Ok, here is the story, and some fact. Computer: Samsung NP900X3C-A04HK (256GB SSD, 8GB RAM) OS to install: Windows 7 Ultimate SP1 (not from Samsung, own fresh Win) I purchased this laptop about a year ago, never booted it into the Windows Home that was installed on it, installed directly Ubuntu on the machine. Full disc encryption was the selected install, so of course it wiped the complete disc (including Samsung Recovery Partition). After some time, I felt like going back to Windows, as Windows 7 is actually quite nice. So I went to buy a fresh Windows 7Ultimate with SP1. Now to the tricky part. Windows installs perfectly, and after installing all Windows updates, drivers from Samsung, software I need, it is time for shutting it down and go to bed. Starting it up again, and it is not booting, these are the type of errors I have gotten so far (fresh installed it more then a dozen times now, and tried different suggestions from threads on the net). Windows failed to start... Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. File: /boot/bcd Status: 0xc000000f Info: an error occurred while attempting to read the boot configuration data. And some other errors, not all the same. Not memory of this. I have run different disc checks, and all says my SSD is in perfect shape. Note: Soft reboots from Windows menu works, never gets corrupted. But if I Shutdown and then start it up again, this is when it happens. Can someone help me not get back to Ubunut? What can be the cause, and how can it be fixed so I do not get there problems again?

  Read the article

• Older monitor not working with HDMI to DVI cable (from ultrabook)

  - by ShellfishGene

  I have a Lenovo Yoga ultrabook which only has a HDMI port. I bought an HDMI to DVI cable, and it works as expected with a LG monitor in my office. As soon as I plug it in the screen is cloned. At home I have an older Dell UltraSharp 2005fp, and for that one it does not work. When I plug the cable in "something" happens, the monitor goes from the "no signal" screen to black. On the laptop however nothing happens. In the Windows 8 display setup I don't have another monitor, clicking "detect" does not find one either. I can manually set a second display for cloning or extending, but never get a picture on the Dell. Connecting my media player thing with the cable to the Dell monitor works for when the player displays it's logo at a low resolution, but when it goes into 750p mode after booting the picture also goes away. Mabye that's due to HDCP though. Any ideas? Something to do with Windows 8, or DVI versions?

  Read the article

• How can I undo what I did when I accidentally booted linux host inside itself with VMware?

  - by ThomasGHenry

  Hello, I'm dual booting XP and Kubuntu. I wanted to boot to my existing raw scsi XP partition inside Kubuntu, not a virtual XP instance. I accidentally booted Kubuntu inside itself. I know this is a big mistake, so I interrupted the VM, which saved the state and closed. I rebooted the host and now I can't load the Kubuntu partition at boot time. I get a maintenance shell and the Kubuntu partition is read-only. I am able to boot XP as usual. I removed the HDD and tried to mount it on another computer as an external drive and neither partition (XP or Kubuntu) will be recognized, it just appears to be one device that still mounts and appears empty. From the maintenance shell I can see all the files are still on the Kubuntu partition. How can I undo what I did when I accidentally booted Kubuntu inside itself? Is it a matter of unlocking some files somewhere? how can I do that on a RO filesystem? Thanks!

  Read the article

• Mail server DNS failed to resolved by Mac clients

  - by Concordus Applications

  We have two internal DNS servers. One is located on a linux server box and the other is the router's DNS management. We set the linux box as primary DNS via DHCP and the router as secondary. We have a few Mac clients that are accessing our internal mail server (hostnamed "mail" internally). When using IMAP or SMTP against the mail server internally, the mac boxes will sometimes fail to locate the server. If I use NSLOOKUP I can see that "mail" is pointed to the correct IP address and is being resolved via the correct DNS server, but if I ping "mail" it fails. ~ (bash)$ nslookup mail Server: 254.254.254.206 Address: 254.254.254.206#53 Name: mail.example.com Address: 254.254.254.205 Note: I replaced our actual internal IP address with 254.254.254.* If I wait a few minutes (3-5 minutes), somehow it resolves itself and sends successfully. This happens multiple times a day. The /etc/hosts file on the mac boxes is the default config. ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost Is there something about Mac clients I should know to prevent this failed DNS resolution? Client boxes are: OSX 10.7.4, 8GB RAM, i5 MacBooks Server is: Ubuntu 12.04 Server

  Read the article

• Can no longer duplicate display to external monitor on Windows 7

  - by rbeier

  We have a large TV at work - I connect my laptop to it to share my screen during meetings. Until today, my laptop display has been duplicating to the TV automatically when I connect the TV cable to the laptop. The display resolution would decrease automatically to be compatible with the TV. Today, however, it's stopped working. When I connect the cable to the TV, the display extends rather than duplicating. Using the Win+P key combination (or Fn+F7 on my Lenovo laptop), I can choose to duplicate the display - but when I do this, it ends up only displaying on the laptop. I can get it to display on the TV by hitting Win+P and choosing "projector only", but then I can't see what I'm doing on the laptop screen. I have a Lenovo W520 laptop running Windows 7, connected to the TV using a DisplayPort-to-HDMI converter cable. The TV's native resolution is 1280x720; the laptop's native resolution is 1600x900. I've tried booting with the TV cable already connected; I've tried manually lowering the display resolution on the laptop to 1280x720 before duplicating the display. Neither works. Does anyone have any other suggestions?

  Read the article

• Win7 taskbar freezes on startup for about 1-2 mins

  - by Mike

  Running Win7 64-bit for about 4 months now. Never had this problem, didn't install anything new recently. When I boot up I can't do anything in the taskbar, it's frozen for about 1-2 minutes then everything is normal. I can right click on my desktop and move my mouse around. This randomly just started happening a couple days ago after a reboot. I have a 3.2ghz quad, SSD, 4 gig ram, etc. and it usually starts up quickly. After some troubleshooting (including running antivirus and Anti-Malware), it doesn't appear to be software related, but appears to be services related. I can boot up in safe mode and safe mode with networking just fine. I can also boot up normally with all my regular software loading at startup, BUT with all my services turned off. Now the odd part. When I run msconfig to disable all the services at startup and go through ticking them on 5-10 at a time or so and booting up it seems to be somewhat random. Ticking everything on from "Application Experience" halfway down to about "Quality Windows Audio Video Experience" and I can boot without the 1-2 min. freeze. Then I start ticking the stuff below that from a couple of Remote Accesses to Smart Card and Task Scheduler, etc. But the weird part is sometimes it will freeze sometimes it won't. I can't narrow it down. Then if it freezes, I'll boot up in safe mode and turn the ones I just turned on back off and I'll reboot normally but it will freeze again. Which makes no sense because that configuration just worked without freezing just before. I got frustrated enough that I backed up and wiped my hard drive (formatted and everything) and reinstalled Win7 but when I booted up, the freeze happened again. Any ideas? Thanks in advance.

  Read the article

• No "New Folder" button in windows 7

  - by user1125620

  My sibling's laptop is running windows 7 x64. The torrents folder in Documents doesn't show the New Folder button. ctrl+shift+n doesn't work either. I tried EVERYTHING here: Can't create new folder from anywhere in Windows 7 ..but nothing worked. As with the OP there, running the .reg file brings an error that says something about not being able to change the registry value while something is using it. I removed one entry at a time in the .reg file until I narrowed down the ones that were causing the problem, which were in HKEY_CLASSES_ROOT/CLSID. The only different reg value, however, was in HKEY_CLASSES_ROOT\CLSID{11dbb47c-a525-400b-9e80-a54615a090c0}\InProcServer32, for which the default value was %SystemRoot%\system32\explorerframe.dll and the value trying to be set ExplorerFrame.dll. I'm on windows 7 32bit and that's the same value I have for the entry, so I doubt that's it. The only thing I think is slightly off is that there is a user group with a strange name that only has execute and read access, and I can't grant it full control. Every time I try, it acts as if it works, but doesn't change it. I tried booting into safe mode and changing it, but it did the same thing. It is the folder where utorrent puts any new downloads, so it's possible utorrent did something, though that's never happened to me before. edit: I had renamed the folder to something else to avoid the problem, and then went onto my own computer to try to figure out what was wrong (I personally don't like using the touchpad on laptops). While searching, my sibling starting watching a movie. I minimized the movie and saw that the same thing had happened to the folder I renamed. Also changed was the file layout. It showed the different days and the files modified on those days. So, I was able to fix it by doing: Clicking Organize Layout Menu Bar On the menu bar clicking View Arrange By Folder

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Introducing Oracle System Assistant

  - by B.Koch

  by Josh Rosen One of the challenges with today's servers is getting the server up and running and understanding what all of the steps are once you plug the server in for the first time. So many different pieces come into play: installing drivers, updating firmware, configuring RAID, and provisioning the operating system. All of these steps must be done before you can even start using the server. Finding the latest firmware and drivers, making sure you have the right versions, and knowing that all the different software and firmware components work together properly can be a real challenge. If not done correctly, such as if you separately downloading disk firmware or controller firmware that doesn't match the existing OS drivers, you could experience bugs, performance problems, and incompatibilities. Gone are the days of having to locate the tools and drivers media that shipped with the server only to find out that newer versions of software and firmware are available on the web. Oracle has solved these challenges in the new X3-2 family of servers by introducing Oracle System Assistant. Oracle System Assistant is an innovative tool that is built-in to every new x86 server. It provides step-by-step assistance with configuring the server, updating firmware and drivers, and provisioning the operating system. Once you have completed all of the steps in the Oracle System Assistant tool, the server is ready to use. Oracle System Assistant was designed to be easy and straightforward. Starting it is as simple as pressing F9 when the server is booting. You'll need a keyboard, monitor, and mouse or you can use the remote console feature of Oracle ILOM (Integrated Lights Out Manager) to access a virtual KVM to the server from any machine. From there Oracle System Assistant will walk you through each of the steps necessary to set up your server. After configuring the network settings for Oracle System Assistant, the next step is to check for any new software or firmware for the server. Oracle System Assistant connects back to Oracle using your My Oracle Support account and downloads any updates that were made available to you for this specific server. This is where you really start to see the innovation that went into Oracle System Assistant. Firmware for Oracle ILOM and BIOS, operating system drivers, and other system firmware (including for option cards and disk drivers) come as a single bundle, downloading as a single unit, that has been engineered and tested to work together by Oracle. Oracle System Assistant figures out the right combination for your server, so you don't have to. Now that the server has the latest firmware, Oracle System Assistant will next walk you through configuring the hardware. From Oracle System Assistant, you can configure many Oracle ILOM settings, including the network settings and initial user accounts. This ensures that ILOM is accessible and ready to use. Oracle System Assistant is where all parts of the server come together. In addition to communicating with Oracle ILOM and interacting with BIOS, Oracle System Assistant understands and can configure the storage subsystem. Before installing the operating system, Oracle System Assistant can detect the storage configuration and configure RAID for all disks in the system. At this point, the server is ready to be provisioned with the host operating system. You can use Oracle System Assistant to provision a supported OS, including Oracle Linux, Oracle VM, RHEL, SuSe Linux, and Windows. And by using Oracle System Assistant, you can be sure that the proper OS drivers are installed for each of the installed hardware components. With Oracle System Assistant, initial setup of the server has never been easier. If we can innovate around problems and find solutions to make our servers easier to manage, this reduces IT costs and makes managing servers simpler. I think with Oracle System Assistant we have done just that. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• How To Quickly Reboot Directly from Windows 7 to XP, Vista, or Ubuntu

  - by The Geek

  One of the biggest annoyances with a dual-boot system is having to wait for your PC to reboot to select the operating system you want to switch to, but there’s a simple piece of software that can make this process easier. This guest article was written by Ryan Dozier from the Doztech tech blog. With a small piece of software called iReboot we can skip the above step all together and instantly reboot into the operating system we want right from Windows. Their description says: “Instead of pressing restart, waiting for Windows to shut down, waiting for your BIOS to post, then selecting the operating system you want to boot into (within the bootloader time-limit!); you just select that entry from iReboot and let it do the rest!” Don’t worry about iReboot reconfiguring  your bootloader or any dual boot configuration you have. iReboot will only boot the selected operating system once and go back to your default settings. Using iReboot iReboot is quick and easy to install. Just download it, link below, run through the setup and select the default configuration. iReboot will automatically figure out what operating systems you have installed and appear in the taskbar. Go over to the taskbar and right click on the iReboot icon and select which operating system you want to reboot into. This method will add a check mark on the operating system you want to boot into. On your next reboot the system will automatically load your choice and skip the Windows Boot Manager. If you want to reboot automatically just select “Reboot on Selection” in the iReboot menu.   To be even more productive, you can install iReboot into each Windows operating system to quickly access the others with a few simple clicks.   iReboot does not work in Linux so you will have to reboot manually. Then wait for the Windows Boot Manager to load and select your operating system.   Conclusion iReboot works on  Windows XP, Windows Vista,  and Windows 7 as well as 64 bit versions of these operating systems. Unfortunately iReboot is only available for Windows but you can still use its functionality in Windows to quickly boot up your Linux machine. A simple reboot in Linux will take you back to Windows Boot Manager. Download iReboot from neosmart.net Editor’s note: We’ve not personally tested this software over at How-To Geek, but Neosmart, the author of the software, generally makes quality stuff. Still, you might want to test it out on a test machine first. If you’ve got any experience with this software, please be sure to let your fellow readers know in the comments. Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyKeyboard Ninja: 21 Keyboard Shortcut ArticlesTest Your Computer’s Memory Using Windows Vista Memory Diagnostic ToolEnable or Disable UAC From the Windows 7 / Vista Command LineSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Laptop screen blank after login when external monitor is not connected

  - by Ramon Suarez

  Ubuntu does not switch back automatically to only monitor present when booting after disconnecting external monitor. Here's a video showing what happens. I get to the login window and everything looks ok, then I type my password, the desktop image shows up and... everything goes blank. It does not happen when I just login as a guest. When possible I work with my laptop connected to an external screen via the VGA port. The problem comes when I boot the computer without that secondary screen connected: The login screen comes out ok. After login the screen goes black, but I can hear the login sound. If I hit ctr + alt + backwards-delete and login again sometimes it is fixed, but not all. If I log in as a different user everything is OK. Then I log in as my user and sometimes it works. To have a screen I have to plug a monitor. Although I have turned on the laptop display with that monitor on, if I reboot it goes blank again after login, even if I turn off the external monitor before turning off the computer. I've managed to get my screen back with my username after going into recovery mode, but only sometimes. Failsafe would not load after second screen asking me what I wanted to do (no mouse to click nor keyboard working). My computer is a LDLC Aurore BB1-i5 -8 -S1. Which is the configuration file that keeps the information about the monitors using Displays under lightgdm and where is it? I guess if I could edit it I may have a chance :) One of the things I tried following a solution in another post was removing my monitors.xml file, but it does not work and I don't know how to create a good one that I could use now. When doing DISPLAY=:0 xrandrI get: Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) This is the full dmesg after activating sudo xdiagnoseas Bryce sugested. (If you tell me the relevant parts I will paste them here) When conecting the external monitor, only the external will work, although I can see using Displays that the computer thinks that both are working. I've asked the question in Launchpad but have it keeps on expiring without any feedback. In my opinion Ubuntu should be able to detect automatically that there is no external monitor present and switch to the laptop monitor. There's a similar question here, but it does not apply to my case External monitor set as primary even when disconnected from laptop Update: For clarification, the problem happens only with my user and once I log in. I even get to see the screensaver for about a second, and then it goes blank. Tried Bryce's example (see his answer below), but it did not work. This is the info I get from tty1 with Display=:0 xrandr: – Ramon Suarez Jul 9 at 16:36 Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >