Search Results

Search found 2619 results on 105 pages for 'edge transport'.

Page 75/105 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• How do I migrate Exchange 2007 to new hardware?

  - by Graeme Donaldson

  As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can't demote it while Exchange is installed, I want to move Exchange to a different server. Does anyone have any articles, tips or experiences to share on this? The last time I did this it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Update: After reading Evan's answer I realised that my original question wasn't worded correctly. I'm not looking to do a swing migration, I actually need to move Exchange completely over to a new box. I have done swing migrations in the past, i.e. moving over to a temporary box and back to the original hardware afterwards, and I'm not really sure why I used that term in the original question since it's not what I intended. Any tips?

  Read the article

• Thundrbird 3: can't change column width?

  - by rumtscho

  I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly?

  Read the article

• Pin the Dock to the top

  - by Chris Buchholz

  I wonder if it is possible to pin the Mac OS X Dock to the top in Snow Leopard? I see lets of ideas on how to do this when I google for it, and Secrets (the tweaking app) also provide it as an option, but I don't see any of the ways working for me. I guess it must have worked at some point, since people said it did, but I believe this feature might have been removed from Snow Leopard, and therefore does not work for me. Is this so? Is there really no way to pin the Dock to the top of screen? If not, what ways of "getting rid of the dock" can you guys recommend? I have tried with auto-hiding, but my problem is that this will leave a 4px line at the edge of where the Dock is pinned to, that applications wont cover. Thats not ideal for me. As far as I have understood from googling, this line will not appear if the Dock is pinned to the top, hence my question. What other ways do you guys use to get rid of it?

  Read the article

• Msg 10054, Level 20, State 0, Line 0 Error when altering a stored procedure to add a couple of curso

  - by doug_w

  We have a home-rolled backup stored procedure that uses xp_cmdshell to create and clean up database backups. We have an instance that is 2005 sp3 that we are trying to deploy this script to. I am at a bit of a loss for why it is not working. When I execute the create it runs for about 30 seconds and yields the following error: Msg 10054, Level 20, State 0, Line 0 A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) In my tinkering I discovered that by removing the cursors that actually do the work it will allow me to create the stored procedure (not very helpful for me though). If I add the cursors back in using an alter the error returns. I would be curious if someone has experienced this problem and knows of a solution or work around. I am not opposed to posting the source, it is just lengthy. Things I have checked: Error Logs No dump files in the log directory Thanks in advance for the help.

  Read the article

• need prefuse graph edges like arrows

  - by merve

  Hello, I did my homework and searched both google for a sample and a topic that is answered before on stackoverflow. But nothing has been found. My problem is ordinary edges who does not have a view like arrows. Here is what i do to hope there is forward arrows from target to destination: LabelRenderer nameLabel = new LabelRenderer("name"); nameLabel.setRoundedCorner(8, 8); DefaultRendererFactory rendererFactory = new DefaultRendererFactory(nameLabel); EdgeRenderer edgeRenderer; edgeRenderer = new EdgeRenderer(prefuse.Constants.EDGE_TYPE_LINE, prefuse.Constants.EDGE_ARROW_FORWARD); rendererFactory.setDefaultEdgeRenderer(edgeRenderer); vis.setRendererFactory(rendererFactory); Here is what i see about colour of edges, hoping these must not be transparent: int[] palette = new int[]{ColorLib.rgb(255, 180, 180), ColorLib.rgb(190, 190, 255)}; DataColorAction fill = new DataColorAction("socialnet.nodes", "gender", Constants.NOMINAL, VisualItem.FILLCOLOR, palette); ColorAction text = new ColorAction("socialnet.nodes", VisualItem.TEXTCOLOR, ColorLib.gray(0)); ColorAction edges = new ColorAction("socialnet.edges", VisualItem.STROKECOLOR, ColorLib.gray(200)); ColorAction arrow = new ColorAction("socialnet.edges", VisualItem.FILLCOLOR, ColorLib.gray(200)); ActionList colour = new ActionList(); colour.add(fill); colour.add(text); colour.add(edges); colour.add(arrow); vis.putAction("colour", colour); Thus, i wonder where am i wrong? Why my edges do not seem like arrows? Thanks for any idea. For more detail, i want to paste all of the code: /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package prefusedeneme; import javax.swing.JFrame; import prefuse.data.*; import prefuse.data.io.*; import prefuse.Display; import prefuse.Visualization; import prefuse.render.*; import prefuse.util.*; import prefuse.action.assignment.*; import prefuse.Constants; import prefuse.visual.*; import prefuse.action.*; import prefuse.activity.*; import prefuse.action.layout.graph.*; import prefuse.controls.*; import prefuse.data.expression.Predicate; import prefuse.data.expression.parser.ExpressionParser; public class SocialNetworkVis { public static void main(String argv[]) { // 1. Load the data Graph graph = null; /* graph will contain the core data */ try { graph = new GraphMLReader().readGraph("socialnet.xml"); /* load the data from an XML file */ } catch (DataIOException e) { e.printStackTrace(); System.err.println("Error loading graph. Exiting..."); System.exit(1); } // 2. prepare the visualization Visualization vis = new Visualization(); /* vis is the main object that will run the visualization */ vis.add("socialnet", graph); /* add our data to the visualization */ // 3. setup the renderers and the render factory // labels for name LabelRenderer nameLabel = new LabelRenderer("name"); nameLabel.setRoundedCorner(8, 8); /* nameLabel decribes how to draw the data elements labeled as "name" */ // create the render factory DefaultRendererFactory rendererFactory = new DefaultRendererFactory(nameLabel); EdgeRenderer edgeRenderer; edgeRenderer = new EdgeRenderer(prefuse.Constants.EDGE_TYPE_LINE, prefuse.Constants.EDGE_ARROW_FORWARD); rendererFactory.setDefaultEdgeRenderer(edgeRenderer); vis.setRendererFactory(rendererFactory); // 4. process the actions // colour palette for nominal data type int[] palette = new int[]{ColorLib.rgb(255, 180, 180), ColorLib.rgb(190, 190, 255)}; /* ColorLib.rgb converts the colour values to integers */ // map data to colours in the palette DataColorAction fill = new DataColorAction("socialnet.nodes", "gender", Constants.NOMINAL, VisualItem.FILLCOLOR, palette); /* fill describes what colour to draw the graph based on a portion of the data */ // node text ColorAction text = new ColorAction("socialnet.nodes", VisualItem.TEXTCOLOR, ColorLib.gray(0)); /* text describes what colour to draw the text */ // edge ColorAction edges = new ColorAction("socialnet.edges", VisualItem.STROKECOLOR, ColorLib.gray(200)); ColorAction arrow = new ColorAction("socialnet.edges", VisualItem.FILLCOLOR, ColorLib.gray(200)); /* edge describes what colour to draw the edges */ // combine the colour assignments into an action list ActionList colour = new ActionList(); colour.add(fill); colour.add(text); colour.add(edges); colour.add(arrow); vis.putAction("colour", colour); /* add the colour actions to the visualization */ // create a separate action list for the layout ActionList layout = new ActionList(Activity.INFINITY); layout.add(new ForceDirectedLayout("socialnet")); /* use a force-directed graph layout with default parameters */ layout.add(new RepaintAction()); /* repaint after each movement of the graph nodes */ vis.putAction("layout", layout); /* add the laout actions to the visualization */ // 5. add interactive controls for visualization Display display = new Display(vis); display.setSize(700, 700); display.pan(350, 350); // pan to the middle display.addControlListener(new DragControl()); /* allow items to be dragged around */ display.addControlListener(new PanControl()); /* allow the display to be panned (moved left/right, up/down) (left-drag)*/ display.addControlListener(new ZoomControl()); /* allow the display to be zoomed (right-drag) */ // 6. launch the visualizer in a JFrame JFrame frame = new JFrame("prefuse tutorial: socialnet"); /* frame is the main window */ frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.add(display); /* add the display (which holds the visualization) to the window */ frame.pack(); frame.setVisible(true); /* start the visualization working */ vis.run("colour"); vis.run("layout"); } }

  Read the article

• Service nginx reload: unexpected error

  - by Anna

  I'm trying to install wordpress on my nginx server by following this tutorial: http://premium.wpmudev.org/blog/how-to-setup-your-own-nginx-powered-wordpress-server/ However, the last command at step 7 gave me a strange error: service nginx reload A copy-paste from my terminal: root@server:~# service nginx reload Reloading nginx configuration: nginx: [emerg] unexpected "o" in /etc/nginx/sites-enabled/wordpress:7 nginx: configuration file /etc/nginx/nginx.conf test failed When I nano into sites-enabled/wordpress, on the 7th line I can't find anything strange: <!DOCTYPE html> <html class=" "> <head prefix="og: http://ogp.me/ns# fb: http://ogp.me/ns/fb# object: http://ogp.me/ns/object# article: http://ogp.me/ns/article# profile: http://ogp.me/ns/profile#"> <meta charset='utf-8'> <meta http-equiv="X-UA-Compatible" content="IE=edge"> Also, I don't see any obvious errors in my nginx.conf file, but maybe I'm not checking something? The first couple of lines of the nginx config file: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } Any help is appreciated, thanks a lot in advance!

  Read the article

• Postfix "mail-to-script" pipe only delivers empty messages

  - by user68202

  i have a problem here. I want that a incoming email is piped to a php script in the system through postfix. My System is running with ispconfig 3, postfix and dovecot (< virtual mailbox users are saved in mysql). I looked already into this one: How to configure postfix to pipe all incoming email to a script? ... the script is executed, but no "message" is delivered to the script. My setup so far: In ISPConfig 3 i have set up the following email route: Active Server Domain Transport Sort by Yes example.com pipe.example.com piper: 5 excerpt from my postfix master.cf: piper unix - n n - - pipe user=piper:piper directory=/home/piper argv=php -q /home/piper/mail.php so far it is working great (mail sent to [email protected]) (mail.log): Jun 21 16:07:11 example postfix/pipe[10948]: 235CF7613E2: to=<[email protected]>, relay=piper, delay=0.04, delays=0.01/0.01/0/0.02, dsn=2.0.0, status=sent (delivered via piper service) ... and no errors in mail.err the mail.php is sucessfully executed (its chmod 777 and chown'ed to piper), but creates a empty .txt file (normally it should contain the email message): -rw------- 1 piper piper 0 Jun 21 16:07 mailtext_1340287631.txt the mail.php script ive used, is the one from http://www.email2php.com/HowItWorks if i use their (commercial) service to pipe an email to the mail.php (in a apache2 environment) through a provided "pipe-email", the message is saved sucessfully and complete. But as you can see, i dont want to use external services. -rw-r--r-- 1 web2 client0 1959 Jun 21 16:19 mailtext_1340288377.txt So, whats wrong here? I think it has something to do with the "delivering configuration" in my system...

  Read the article

• How to get Synergy working on Ubuntu 11.10 and Windows 7?

  - by Linda

  I'm using Ubuntu 11.10 32-bit and Windows 7 64-bit, however, Synergy only works when a window (application or folder) is open and touching the edge of the screen where the mouse should "jump". In other words, if a window is open and maximized, Synergy works normally. Without any windows, the mouse does not jump to the other screen. My steps: (Ubuntu) apt-get install -y quicksynergy (Windows) Install Synergy (I've tried both 1.3.8 and 1.4.8 and both 32 and 64-bit) On Ubuntu 11.10 32-bit (Synergy Server config): ~/.quicksynergy/synergy.conf section: screens myubuntu: mywin7: end section: links myubuntu: right = mywin7 mywin7: left = myubuntu end On Ubuntu 11.10 32-bit: $ /usr/bin/synergys -f --config .quicksynergy/synergy.conf ... 2012-04-25T14:04:12 NOTE: client "mywin7" has connected /build/buildd/synergy-1.3.6/lib/server/CServer.cpp,287 (output hangs here) On Windows 7 64-bit: Synergy 1.3.8 Client on Microsoft Windows 7 x86 (WOW64) started client connecting to 'myubuntu': ###.###.###.###:24800 connected to server (output hangs here) At this point, things should work, but my mouse still can't change screens unless a window is maximized on my Ubuntu machine. Everything is running on port 24800. No firewall on Ubuntu. Firewall port 24800 open on Windows 7. This was previously working on Ubuntu 10.10 and Windows 7 (so only Ubuntu has been upgraded). I'm open to using either 32 or 64-bit on either server or client side, but I just want to get it working on Ubuntu 11.10 and Windows 7! I'm also using Ubuntu Classic (no effects), and not Unity.

  Read the article

• How to best convert a fully encrypted drive into a Virtual Machine?

  - by SiegeX

  I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

  Read the article

• XSLT: How to exclude empty elements from my result?

  - by Fedor Steeman

  I have a rather complicated xslt sheet transforming one xml format to another using templates. However, in the resulting xml, I need to have all the empty elements excluded. How is that done? This is how the base xslt looks like: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:far="http://www.itella.com/fargo/fargogate/" xmlns:a="http://tempuri.org/XMLSchema.xsd" xmlns:p="http://tempuri.org/XMLSchema.xsd"> <xsl:import href="TransportCDMtoFDM_V0.6.xsl"/> <xsl:import href="ConsignmentCDMtoFDM_V0.6.xsl"/> <xsl:template match="/"> <InboundFargoMessage> <EdiSender> <xsl:value-of select="TransportInformationMessage/SenderId"/> </EdiSender> <EdiReceiver> <xsl:value-of select="TransportInformationMessage/RecipientId"/> </EdiReceiver> <EdiSource> <xsl:value-of select="TransportInformationMessage/Waybill/Parties/Consignor/Id"/> </EdiSource> <EdiDestination>FARGO</EdiDestination> <Transportations> <xsl:for-each select="TransportInformationMessage/TransportUnits/TransportUnit"> <xsl:call-template name="transport"/> </xsl:for-each> <xsl:for-each select="TransportInformationMessage/Waybill/TransportUnits/TransportUnit"> <xsl:call-template name="transport"/> </xsl:for-each> <xsl:for-each select="TransportInformationMessage/Waybill"> <EdiImportTransportationDTO> <Consignments> <xsl:for-each select="Shipments/Shipment"> <xsl:call-template name="consignment"/> </xsl:for-each> </Consignments> <EdiTerminalDepartureTime> <xsl:value-of select="DatesAndTimes/EstimatedDepartureDateTime"/> <xsl:value-of select="DatesAndTimes/DepartureDateTime"/> </EdiTerminalDepartureTime> <EdiAgentTerminalArrivalDate> <xsl:value-of select="DatesAndTimes/EstimatedArrivalDateTime"/> <xsl:value-of select="DatesAndTimes/ArrivalDateTime"/> </EdiAgentTerminalArrivalDate> <EdiActivevehicle> <xsl:value-of select="Vehicle/TransportShiftNumber"/> </EdiActivevehicle> <EdiConveyerZipCodeTown><xsl:text> </xsl:text></EdiConveyerZipCodeTown> </EdiImportTransportationDTO> </xsl:for-each> </Transportations> </InboundFargoMessage> </xsl:template> </xsl:stylesheet> What needs to be added, so that empty elements are left out? For example, a snippet from the resulting xml: <?xml version="1.0" encoding="UTF-8"?> <InboundFargoMessage xmlns:p="http://tempuri.org/XMLSchema.xsd" xmlns:far="http://www.itella.com/fargo/fargogate/" xmlns:a="http://tempuri.org/XMLSchema.xsd"> <EdiSender>XXXX</EdiSender> <EdiReceiver>YYYY</EdiReceiver> <EdiSource>TR/BAL/IST</EdiSource> <EdiDestination>FARGO</EdiDestination> <Transportations> <EdiImportTransportationDTO> <Consignments> <EdiImportConsignmentDTO> <ConsignmentLines> <EdiImportConsignmentLineDTO> <DangerousGoodsItems> <EdiImportDangerGoodsItemDTO> <EdiKolliTypeOuter/> <EdiKolliTypeInner/> <EdiTechnicalDescription/> <EdiUNno/> <EdiClass/> <EdiDangerFactor/> <EdiEmergencyTemperature/> </EdiImportDangerGoodsItemDTO> </DangerousGoodsItems> <BarCodes> <EdiImportConsignmentLineBarcodeDTO/> </BarCodes> <EdiNumberOfPieces>00000002</EdiNumberOfPieces> <EdiGrossWeight>0.000</EdiGrossWeight> <EdiHeight/> <EdiWidth/> <EdiLength/> <EdiGoodsDescription/> <EdiMarkingAndNumber/> <EdiKolliType>road</EdiKolliType> <EdiCbm/> <EdiLdm/> </EdiImportConsignmentLineDTO> That really needs to be: <?xml version="1.0" encoding="UTF-8"?> <InboundFargoMessage xmlns:p="http://tempuri.org/XMLSchema.xsd" xmlns:far="http://www.itella.com/fargo/fargogate/" xmlns:a="http://tempuri.org/XMLSchema.xsd"> <EdiSender>XXXX</EdiSender> <EdiReceiver>YYYY</EdiReceiver> <EdiSource>TR/BAL/IST</EdiSource> <EdiDestination>FARGO</EdiDestination> <Transportations> <EdiImportTransportationDTO> <Consignments> <EdiImportConsignmentDTO> <ConsignmentLines> <EdiImportConsignmentLineDTO> <DangerousGoodsItems/> <BarCodes/> <EdiNumberOfPieces>00000002</EdiNumberOfPieces> <EdiGrossWeight>0.000</EdiGrossWeight> <EdiKolliType>road</EdiKolliType> </EdiImportConsignmentLineDTO> In other words: Empty elements should be left out.

  Read the article

• PTR record not valid for all domains

  - by charnley

  We have an issue sending emails to certain domains, namely Time Warner and Cox. Last week, we decommissioned our Exchange 2003 server and now our Exchange 2010 server is doing all of the transport for our domain. We run our own authoritative name servers, so we are in charge of the DNS and have modified our PTR record to reflect the new server. All mailflow is working except for these 2 domains. When I telnet on port 25 to the mail servers for Cox and Time Warner I am receiving errors. For Cox the error is: 554... rejected - no rDNS And when I telnet to port 25 to the Time Warner mail server we get this: 554 5.7.1 - Connection refused. IP name lookup failed for x.x.x.x I have run through the outbound SMTP test on Microsoft Remote Connectivity Analyzer and get 100% completely successful results. MXToolbox comes up with all successful tests on SMTP as well, showing correct reverse banner check, and no blacklisting. DNSQueries.com shows a valid reverse DNS entry as well for us. Outbound emails to these 2 domains continue to sit in the queue. Any ideas or advice would be greatly appreciated. Thanks!

  Read the article

• Too many concurrent connections Exchange 2010. What else is there to check?

  - by hydroparadise

  I thought that I had this under control before. But for some reason during our last email marketing promo, I start receiving from our mass email client (built in house).. The message could not be sent to the SMTP server. The transport error code is 0x800ccc67. The server repsonse was 421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel again. There's several places I've checked to make sure that wouldn't be an issue. First I checked that receive connector was set to receive an adequate number of connections on our relay connector (1000 connections). Then, I would later find out about Throttling Policies. I created one and set all the properties I knew to set in terms of the policy following properties to 1000; EWSMaxConcurrency, OWAMaxConcurrency, CPAMaxConcurrency, and CPAMaxConcurrency. Still, the email client starts receiving the error shortly after 100 has been sent and takes about 15-30 seconds. The process is then repeatable, but still the error gets received at the same spot everytime. Is there a rate setting that I am missing? Was there a windows update that I missed looking at? Should the software have it's own throttling feature?

  Read the article

• Pin the Dock to the top or disable it

  - by Chris Buchholz

  I wonder if it is possible to pin the Mac OS X Dock to the top in Snow Leopard? I see lets of ideas on how to do this when I google for it, and Secrets (the tweaking app) also provide it as an option, but I don't see any of the ways working for me. I guess it must have worked at some point, since people said it did, but I believe this feature might have been removed from Snow Leopard, and therefore does not work for me. Is this so? Is there really no way to pin the Dock to the top of screen? If not, what ways of "getting rid of the dock" can you guys recommend? I have tried with auto-hiding, but my problem is that this will leave a 4px line at the edge of where the Dock is pinned to, that applications wont cover. Thats not ideal for me. As far as I have understood from googling, this line will not appear if the Dock is pinned to the top, hence my question. What other ways do you guys use to get rid of it?

  Read the article

• is ksplice production ready?

  - by faultyserver

  I would be interested to hear the serverfault community's experiences with Ksplice in production. Quick blurb from wikipedia: Ksplice is a free and open source extension of the Linux kernel which allows system administrators to apply security patches to a running kernel without having to reboot the operating system. and Ksplice can, without restarting the kernel, apply any source code patch that only needs to modify the kernel code. Unlike other hot update systems, Ksplice takes as input only a unified diff and the original kernel source code, and it updates the running kernel correctly, with no further human assistance required. Additionally, taking advantage of Ksplice does not require any preparation before the system is originally booted (the running kernel does not need to have been specially compiled, for example). In order to generate an update, Ksplice must determine what code within the kernel has been changed by the source code patch. So a few questions: How has the stability been? any odd issues that you have encountered with its 'rebootless live patching' of the kernel? Kernel panics or horror stories? I have been running it on a few test systems and so far its been working as advertised, but I am interested in what other sysadmins experiences have been with Ksplice before going 'all in' and deploying this on our production servers. So, anybody using Kspice in production? update: hmm, not seeing any real activity on this question after a couple of hours (besides some kind upvotes and favs). Maybe to spark some activity I'll also ask a few more questions and see if we can get this discussion going... "If you are aware of Ksplice, is there a reason you are not using it?" "Do you feel its still too bleeding edge, unproven or untested?" "Does Ksplice not fit well within your current patch-management system?" "Do you hate having systems that have long (and secure) uptimes?" ;-)

  Read the article

• Legal IT documents

  - by TylerShads

  I have been wondering this past week because my big boss told me to start keeping track of all the things I have fixed, how to fix them, etc. Which is reasonable and have been doing anyway. But then a related question came to mind. What kind of documentation should I have on hand as far as users go. More specifically I am talking in terms of EULA, ToC, etc (correct me please if I'm using the wrong terms) Or more specifically a policy, so to speak, for the users and such. Can't say I'm a legal expert, otherwise I'd be a lawyer. The environment the users are in is pretty laid back so I don't forsee a problem. But assume that there should ever arise a problem, what should I have written up/have on hand? EDIT: I really should have noted that we are a medical transport facility and have patient records so I know that something must be done there to comply with HIPAA policies I believe. I do like what anthonysomerset said about the "If I get by a bus" Scenario and want to apply it not only to the documentation I am currently writing but also for if say an employee were to steal info from the server or edge cases, theft, etc. As far as our staff, its relatively small as in a single HR person, no legal department aside from the 2 owners' lawyers and me being the only IT person on staff with a guy who is no more than a mac superuser.

  Read the article

• Is there any way to synchronize Outlook RSS Feeds with BlackBerry?

  - by nvuono

  Does anyone know how I can view the contents of my Outlook 2007 RSS Feeds from a corporate-issued BlackBerry? Our Inbox and Calendar are already integrated with corporate exchange servers but it looks like nobody cares too much about the RSS Feeds. Is there some setting on my Blackberry or in Outlook I could possibly tweak to include these updates? I know there are many standalone RSS readers available for blackberry (Google Reader for example) but I mention Outlook RSS Feeds specifically in my question because I am subscribing to a number of RSS feeds I've setup on my intranet for various version control systems that would be inaccessible to an external RSS reader. It seems like I might have to setup some sort of email commit notifications if I want anything from my blackberry but I much prefer the 'pull' method of an RSS feed viewer over receiving streams of emails. Please feel free to suggest any alternatives! Edit: I've additionally tried moving my "SVN Repository" folder directly into my Mailbox instead of keeping it as a child of the RSS Feeds folder. This allows me to view the SVN Repository folder on my blackberry where previously the RSS Feeds folder and all children were hidden but unfortunately it never seems to get populated with the items that are displaying in Outlook. I've even made a fresh commit to make sure that the SVN Repository folder still works correctly in Outlook from outside the RSS Feeds folder but no luck on the BlackBerry end of things. BlackBerry Model Details: BlackBerry 8310 smartphone (EDGE) v4.2.2.170 Platform 2.5.0.30

  Read the article

• wsdl interoperability problems

  - by manu1001

  I wrote a .asmx web service which I'm trying to consume from a java client. I'm using axis2's wsdl2java to generate code. But it says that the wsdl is invalid. What exactly is the problem here? It is .net which generated the wsdl automatically after all. Are there problems with wsdl standards, rather the lack of them? What can I do now? I'm putting the wsdl here for reference. <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://localhost:4148/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://localhost:4148/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"> <wsdl:types> <s:schema elementFormDefault="qualified" targetNamespace="http://localhost:4148/"> <s:element name="GetUser"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="uid" type="s:string" /> </s:sequence> </s:complexType> </s:element> <s:element name="GetUserResponse"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="GetUserResult" type="tns:User" /> </s:sequence> </s:complexType> </s:element> <s:complexType name="User"> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="HA" type="tns:ComplexT" /> <s:element minOccurs="0" maxOccurs="1" name="AP" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="AL" type="tns:ArrayOfString" /> <s:element minOccurs="0" maxOccurs="1" name="CO" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EP" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="ND" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="AE" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="IE" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="IN" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="HM" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="AN" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="MI" type="tns:ArrayOfString" /> <s:element minOccurs="0" maxOccurs="1" name="NO" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="TL" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="UI" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="DT" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="PT" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="PO" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="AE" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="ME" type="tns:ArrayOfString" /> </s:sequence> </s:complexType> <s:complexType name="ComplexT"> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="SR" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="CI" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="TA" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="SC" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="RU" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="HN" type="s:string" /> </s:sequence> </s:complexType> <s:complexType name="ArrayOfString"> <s:sequence> <s:element minOccurs="0" maxOccurs="unbounded" name="string" nillable="true" type="s:string" /> </s:sequence> </s:complexType> </s:schema> </wsdl:types> <wsdl:message name="GetUserSoapIn"> <wsdl:part name="parameters" element="tns:GetUser" /> </wsdl:message> <wsdl:message name="GetUserSoapOut"> <wsdl:part name="parameters" element="tns:GetUserResponse" /> </wsdl:message> <wsdl:portType name="UserServiceSoap"> <wsdl:operation name="GetUser"> <wsdl:input message="tns:GetUserSoapIn" /> <wsdl:output message="tns:GetUserSoapOut" /> </wsdl:operation> </wsdl:portType> <wsdl:binding name="UserServiceSoap" type="tns:UserServiceSoap"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="GetUser"> <soap:operation soapAction="http://localhost:4148/GetUser" style="document" /> <wsdl:input> <soap:body use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="UserServiceSoap12" type="tns:UserServiceSoap"> <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="GetUser"> <soap12:operation soapAction="http://localhost:4148/GetUser" style="document" /> <wsdl:input> <soap12:body use="literal" /> </wsdl:input> <wsdl:output> <soap12:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="UserService"> <wsdl:port name="UserServiceSoap" binding="tns:UserServiceSoap"> <soap:address location="http://localhost:4148/Service/UserService.asmx" /> </wsdl:port> <wsdl:port name="UserServiceSoap12" binding="tns:UserServiceSoap12"> <soap12:address location="http://localhost:4148/Service/UserService.asmx" /> </wsdl:port> </wsdl:service> </wsdl:definitions>

  Read the article

• Exchange 2010 CAS Removal == Broken???

  - by Doug

  Hi there, I recently upgraded to exchange 2010 and have a setup with 2 of my servers running CAS roles - EXCH01, EXCH02 EXCH02 just happens to also have a mailbox role where a lot of the users sit EXCH01 is my front facing CAS server, and is facing the net with SSL etc and incoming mail moving through it as a hub transport layer server as well. As i was trying to lean things out in my VM environment i removed the CAS role from EXCH02 and all hell broke loose. All the mail users that have a mailbox on EXCH02 had their homeMTA set to a deleted items folder in AD and so did their msExchHomeServer properties. After a complete battle i manually fixed these issues to the oldvalues, and in the mean time reinstalled CAS on EXCH02 (management was going nuts with out OUTLOOK working so i just put things back the way they were in a hurry.) I must add as a strange thing on the side, that before i reset these to point at EXCH02 i tried EXCH01 and it failed. I still want to remove the CAS role from EXCH02 as it should really not have it (error on install/planning on my part) and would have thought that this would not cause the issues it did, i assumed that the fact that there was another CAS server in the admin group all would be good. Was i wrong in my assumption? and what can i do to complete this successfully the second time round? Do i need to rehome all the mailboxes to the CAS server? is this a bug in the role uninstall?

  Read the article

• IPC between multiple processes on multiple servers

  - by z8000

  Let's say you have 2 servers each with 8 CPU cores each. The servers each run 8 network services that each host an arbitrary number of long-lived TCP/IP client connections. Clients send messages to the services. The services do something based on the messages, and potentially notify N1 of the clients of state changes. Sure, it sounds like a botnet but it isn't. Consider how IRC works with c2s and s2s connections and s2s message relaying. The servers are in the same data center. The servers can communicate over a private VLAN @1GigE. Messages are < 1KB in size. How would you coordinate which services on which host should receive and relay messages to connected clients for state change messages? There's an infinite number of ways to solve this problem efficiently. AMQP (RabbitMQ, ZeroMQ, etc.) Spread Toolkit N^2 connections between allservices (bad) Heck, even run IRC! ... I'm looking for a solution that: perhaps exploits the fact that there's only a small closed cluster is easy to admin scales well is "dumb" (no weird edge cases) What are your experiences? What do you recommend? Thanks!

  Read the article

• How to set up a easy-to-use proxy for the whole system with WinXP client and server?

  - by Pekka

  I am working together intensively with a colleague on the Canary Islands. We speak through live messenger and work together using a RDP software. She has frequent problems with connections to certain big-name and small-name sites (amongst others live.com, google.com, gmx.de) very likely to be caused by the spanish provider (the connections simply time out, this has been going on for weeks already). I have been thinking about setting up my computer as a proxy to make these connections work. I have a DSL connection and am behind a NAT capable router that I control. Does anybody know a simple, "one-click" way to transport ALL network traffic through a remote proxy? Without having to set proxy settings for each application that uses the internet? VPN is not an option, because I am behind a firewall that supports protocol 47 and such, but I have never succeeded in getting an incoming VPN connection to work. I can however redirect normal traffic using NAT. A VPN solution that does not need strange protocols would also be an option.

  Read the article

• Failed to re-publish a page - Tridion 2011 SP1

  - by Wilson Yu

  We are getting some strange error when re-publishing the same page. The page was published successfully the first time and we can see the page from presentation server. It failed with the following error (see below) when we tried to publish it again (no change to page). The page ran OK within template builder and we got the correct html output, it failed in the last committing deployment step (Prepare Transport, Transporting, Preparing Deployment and Deploying are all successful). Once it fails to publish the second time, it always fails to publish, and we can't un-publish it either. Also when we make a copy of the failed page and create a new page, we can publish the new page first time, the new page then fails to publush the second time with the same error. Does anyone know what would cause this error? any help would be greatly appreciated. Here is the error msg: Committing Deployment Failed Phase: Deployment Prepare Commit Phase failed, Unable to prepare transaction: tcm:0-4210-66560, For input string: "", For input string: "", Unable to prepare transaction: tcm:0-4210-66560, For input string: "", For input string: ""

  Read the article

• Make UEFI, GPT, Bootloader, SSD, USB, Linux and Windows work together

  - by user129552

  I like to use the latest hardware and the latest software; thus I have a Laptop (Lenovo X220) with UEFI instead of BIOS an SSD instead of an HDD GPT partitioning scheme instead of MBR USB to boot from instead of optical disks. I need to use both Windows and Linux. I tried to make them work alongside, but I didn't succeed. Most Linux distribution isos don't even really work on UEFI systems booted from USB. (Not even the self-claimed cutting-edge Fedora. I also tried Linux Mint Debian Edition and Sabayon Linux (according to this guide) which did not work. Only Ubuntu worked for me. I first installed Windows 8 which created sda1: Recovery, sda2: EFI system, sda3: msftres, sda4: NTFS Windows. Windows worked without a problem. I then created sda5: linux-swap and installed Ubuntu into sda6: btrfs. After rebooting, I was not presented GRUB2 as expected, but instead my system just booted into Ubuntu. I could no longer access Windows. After fixing dpkg in btrfs Ubuntu, I followed the Ubuntu documentation on UEFI booting. The result left me with a broken GRUB2, but interestingly, when I wanted to select the device to boot from, I was not only presented the internal SSD, an attached USB device, or LAN, but also Grub2 (broken), Ubuntu and Windows. The result is not very satisfying to me. What would I have to do to fix everything? Or differently asked, what operating system should I install at what point given my possibilities and requirements, so that I have a working bootloader in my UEFI GPT system which presents me a working Linux and Windows.

  Read the article

• How can I "filter" postfix-generated bounce messages?

  - by Flimzy

  We are using postfix 2.7 and custom SMTPD (based on qpsmtpd) in highly customized configuration for spam filtering. We have a new requirement to filter postfix-generated bounces through our custom qpsmtpd process (not so much for content filtering, but to process these bounces accordingly). Our current configuration looks (in part) like this: main.cf (only customizations shown): 2526 inet n - - - 0 cleanup pickup fifo n - - 60 1 pickup -o content_filter=smtp:127.0.0.2 Our smtpd injects messages to postfix on port 2526, by speaking directly to the cleanup daemon. And the custom pickup command instructs postfix to hand off all locally-generated mail (from cron, nagios, or other custom scripts) to our custom smtpd. The problem is that this configuration does not affect postfix generated bounce messages, since they do not go through the pickup daemon. I have tried adding the same content_filter option to the bounce daemon commands, but it does not seem to have any effect: bounce unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 defer unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 trace unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 For reference, here is my main.cf file, as well: biff = no # TLS parameters smtpd_tls_loglevel = 0 smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache smtp_tls_security_level = may mydestination = $myhostname alias_maps = proxy:pgsql:/etc/postfix/dc-aliases.cf transport_maps = proxy:pgsql:/etc/postfix/dc-transport.cf # This is enforced on incoming mail by QPSMTPD, so this is simply # the upper possible bound (also enforced in defaults.pl) message_size_limit = 262144000 mailbox_size_limit = 0 # We do our own message expiration, but if we set this to 0, then postfix # will try each mail delivery only once, so instead we set it to 100 days # (which is the max postfix seems to support) maximal_queue_lifetime = 100d hash_queue_depth = 1 hash_queue_names = deferred, defer, hold I also tried adding the internal_mail_filter_classes option to main.cf, but also tono affect: internal_mail_filter_classes = bounce,notify I am open to any suggestions, including handling our current content-filtering-loop in a different way. If it's not clear what I'm asking, please let me know, and I can try to clarify.

  Read the article

• New SBS 2011 installation (not migration) in an existing 2008 R2 domain

  - by Tong Wang

  My current network setup has two servers: a Windows 2008 R2 with TMG 2010 as edge firewall (TMG server), a second 2008 R2 with DC, DNS and Hyper-V roles (DCDNS server). I was trying to install SBS 2011 as a child partition on DCDNS, first I installed SBS 2011 in English and did the migration successfully. However, later on, I found that I can't change the display language in SBS 2011 once it's installed (but the clients require a different language), so I had to re-install the SBS in a different language. It is during the re-installation that the problem came up: the migration can't be completed with some error message stating "can't access the source server". I re-ran the migration preparation tool, but it didn't make any difference. I wonder if it's because the source server can only be "migrated" once. Since I only need to setup a handful of users and computers, so I decided to do a new install of SBS and picked a different domain name. But I can't get the SBS to connect to LAN: it can't ping other servers, neither can other servers ping the SBS server. I've tried to stop the DC/DNS services on DCDNS and restart SBS, but with no difference. Anyone has idea how to fix this problem?

  Read the article

• Mongo daemon restarts after replica set issue

  - by Matt Beckman

  We had a recent election in our replica set (2 read nodes; 1 write node) that changed the primary node. Curious as to why this occurred, I started looking through the logs to find out what happened. It appears that mongoNode2 could not communicate with mongoNode3. When both nodes could not communicate, it appears that this caused the services on mongoNode2 and mongoNode3 to restart, eventually resulting in a new primary after the services had been started again. Thu Jun 23 08:27:28 [ReplSetHealthPollTask] DBClientCursor::init call() failed Thu Jun 23 08:27:28 [ReplSetHealthPollTask] replSet info mongoNode3:27017 is down (or \ slow to respond): DBClientBase::findOne: transport error: mongoNode3:27017 query: { \ replSetHeartbeat: "myReplSet", v: 3, pv: 1, checkEmpty: false, from: \ "mongoNode2:27017" } Thu Jun 23 08:27:29 got kill or ctrl c or hup signal 15 (Terminated), will \ terminate after current cmd ends Thu Jun 23 08:27:29 [interruptThread] now exiting Thu Jun 23 08:27:29 dbexit: Is there any reason that the mongo service would restart due to a DBClientCursor::init call() failure? Is this a known bug? It should be noted that mongoNode2 and mongoNode3 are VMs on the same VMware host. MongoNode1 is not on the same host, and it did not have any issues with the service. However, I did not have any other reports of issues with other VMs on the VMware host.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >