Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 76/1036 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Wireless internet is connected to an open network but has no internet

    - by Joshua Reeder
    I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

    Read the article

  • How Can I Install LibreOffice Base?

    - by Rob
    Useful info: I have tried running sudo dpkg --configure -a and sudo apt-get install -f with no result. I am running Kubuntu 11.10 (the updater is far too unreliable to ever be trusted with performing a version upgrade) The rest of LibreOffice seems to work fine (apart from an annoying bug where tooltips are shown as black text on black background...) I have need to use LibreOffice Base to complete a mail merge document. However, I noticed it's not installed. When I go to install it however... rob@hydrogen:~$ sudo apt-get install libreoffice-base [sudo] password for rob: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies. libreoffice-base : Depends: libreoffice-core (= 1:3.4.4-0ubuntu1) but it is not going to be installed Depends: libreoffice-base-core (= 1:3.4.4-0ubuntu1) but it is not going to be installed Depends: libreoffice-java-common (>= 1:3.4.4~) but it is not going to be installed Suggests: libmyodbc but it is not going to be installed or odbc-postgresql but it is not going to be installed or libsqliteodbc but it is not going to be installed or tdsodbc but it is not going to be installed or mdbtools but it is not going to be installed Suggests: libreoffice-gcj but it is not installable Suggests: libreoffice-report-builder but it is not going to be installed E: Unable to correct problems, you have held broken packages. I'm bemused as to which packages it seems to think I have held. As far as I'm aware, Kubuntu doesn't give you the option to hold packages... So, how do I get out of this dependency hell?

    Read the article

  • Set up printing with a networked LPR printer?

    - by Ben
    I'm trying to set up printing to a networked LPR printer, but I can't seem to make it work. The connexion information that IT gives is: Print Spooler: printing.domain.edu Printer Name: PrinterName Print port: 515 Bidirectional: Disabled It's an HP LaserJet p4015x, and I'm using the "HP LaserJet p4015x, hpcups 3.10.6 (color, 2-sided printing)" driver, according to CUPS. I have tried installing via the CUPS admin interface as lpd://printing.domain.edu:515/PrinterName, lpd://printing.domain.edu/PrinterName, and http://printing.domain.edu:515/PrinterName, and none of these has worked (i.e. test pages show up as "stopped").

    Read the article

  • Performance problem with an Intel Wireless 5100

    - by Piet
    I just installed 12.04 on a HP Elitebook 2530p. The performance with wireless connection to an Eminem 4551 is very bad. Wired connection just works great. If I connect to my router (Eminent 4551) wired I have a good performance accessing internet pages with Firefox. When I try to access the same internet pages wireless I get a real bad performance. piet@piet-HP-EliteBook-2530p:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 44:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 44:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) piet@piet-HP-EliteBook-2530p:~$

    Read the article

  • Installing ubuntu on MacBook Pro 9,1

    - by pratnala
    I bought a MacBook Pro 9,1 (Mid 2012, 15inch, NOT retina). Can anyone tell me how to install Ubuntu 12.04 on it? I already have Windows installed via BootCamp. Also, where to install drivers for Ubuntu and all? This link https://help.ubuntu.com/community/MacBookPro has nothing for 9,1 so please help me. If I have to remove BootCamp and reinstall Windows manually because BootCamp doesn't allow resizing of partitions, that's fine. Please tell me how to install Precise on MBP 9,1 Thanks!

    Read the article

  • Ubuntu 11.10 - can't adjust brightness on my laptop

    - by Danny
    Using every method possible I'm unable to change my laptop brightness.. It's stuck on super max brightness.. Using the slider in the "screens" window int he control panel doesnt do anything, and using the fn keys doesn't do anything... Some info about my system: laptop is a MSI VR420 Running ubuntu 11.10 video card is an integrated intel card Used to work when I ran ubuntu 10.10 and earlier versions (not sure if it worked out of the box or if I inadvertly fixed it in previous versions while installing lots of other packages) Brightness slider on the "screen" window doesn't do anything, "dim when on battery -power" doesnt do anything When I use the fn+f4/f5 keys to adjust brightness there is a popup showing that its receving the input, but i can only go from between 0 brightness and max brightness.. (that is what the output is showing, the brightness does not change though) when attempting to change the brightness with fn+f4/f5 my dmesg log reports "ACPI: Failed to switch the brightness" Here are some outputs from some terminal commands, not sure if any of this is useful or not.. lspci - http://pastebin.com/EimZSGs3 "ls /sys/class/backlight/*/brightness" will output "/sys/class/backlight/intel_backlight/brightness" "cat /sys/class/backlight/intel_backlight/brightness" = 0 (when I use the fn+f4/f5) this will change betwene 0 and, but the actual brightness doesn't change) "cat /sys/class/backlight/intel_backlight/max_brightness" = 1 "lsmod | grep ^i915" = i915 505108 3 here is the list of things I've tried through searching google..... Edit /etc/default/grub?GRUB_CMDLINE_LINUX_DEFAULT: acpi_osi=Linux, acpi_backlight=vendor, nomodeset. (as well as several different combinations of these settings being on or off) Edit /etc/X11/xorg.conf (file doesn't exist on my system) Edit /proc/acpi/video/VGA/LCD/brightness (file doesn't exist) sudo setpci -s 00:02.0 F4.B=XX (does nothing) xbacklight -set XX (does nothing) I've tried about everything with no luck... The only thing i haven't tried is adding the ppa that someone suggested here: Unable to change brightness in a Lenovo laptop .... However according to the notes on the ppa.. all of the changes that are in the ppa are now actually apart of 11.10 and the ppa is only for people with 11.04.. Does anyone have any ideas for me? edit:by setting acpi=off in my /etc/default/grub file I was about to get my fn+f4/f5 keys to work, also "dim when display to save power" now makes my laptop dim when on battery power.. the dimness slider however still doesn't do anything.. also xbacklight doesn't do anything stil or any of the other methods... The thing i don't get is why setting acpi=off makes my fn+f4/f5 keys work? Isn't acpi supposed to be enables the backlight to be dimmed? does anyone know what ubuntu is deciding to do behind the scenes when acpi=off? Does anyone know what/if any features I might be losing with it off?

    Read the article

  • How do I install GRUB on a RAID system installation?

    - by root45
    I'm trying to setup and install Ubuntu on a RAID 1 setup. I have two disks, sdb and sdc. I've been following this guide https://help.ubuntu.com/community/Installation/SoftwareRAID which more or less works for getting everything set up and Ubuntu installed. The problem is at the end of the installation, it tries to install GRUB. By default it tries my "first disk", which gives a "fatal error". I've tried installing it on a specific partion, e.g. sdb1 as well as RAID devices, e.g. md0, md1, etc.. Nothing seems to work. Edit: The actual error is "Unable to install GRUB in /dev/sdb Executing 'grub-install '/dev/sdb' failed. This is a fatal error." Then I'm taken back to the main install menu. If I choose "Install the GRUB boot loader on a hard disk" option, I can pick the partition, but entering sdb2 or md1 gives the same error. So I went ahead an just didn't install GRUB, which means now I presumably have a working Ubuntu installation, but I can't boot it. I've tried booting from the LiveCD to install GRUB, but I can't chroot into my system because it doesn't seem to recognize that my disk is a Linux disk. There's an error about it being a RAID partition. So basically I would really like to know how you know to which device to install GRUB at installation, or at the very least, how to install it on to my system now. I suppose I should also mention that sda is a Windows 7 installation that I would like to keep around and be able to access at boot. Thanks for any help.

    Read the article

  • Scid Chess Program Compiling issue

    - by lbochitt
    First of all I would like to point that I'm new to Ubuntu so sorry if what I am asking is ridiculous. I have downloaded Scid 4.4 chess program and I have tried to compile it as it was explained on its website: 1) Initialize git. 2) Create a folder where you want to download and (?) compile the source, then cast: git init on your command line. 3) You're now ready to download the sources recall Fulvio's spell: git clone git://scid.git.sourceforge.net/gitroot/scid/scid This should get you the latest Scid source. 4) You're now ready to compile Scid. In principle, all you need to do is: ./configure and then make 5) If you get stuck, you probably need to get developer versions of tcl/tk. This translates into issuing these three commands: sudo apt-get install tcl8.5-dev sudo apt-get install tk8.5-dev sudo apt-get install zlib1g -dev 6) You should now be ready to compile The problem is that when I run ./configure to start compiling the following message appears on Terminal: configure: Makefile configuration program for Scid Tcl/Tk version: 8.5 Your operating system is: Linux 3.8.0-19-generic Location of "tcl.h": /usr/include/tcl8.5 Location of "tk.h": /usr/include/tcl8.5 Location of Tcl 8.5 library: not found Location of Tk 8.5 library: not found Checking if your system already has zlib installed: yes. Using Makefile.conf. Not all settings could be determined! The default Makefile was written. You will need to edit it before you can compile Scid. What should I do? Has anybody faced this problem before? Thanks in advance I have run ls -l /usr/include/tcl8.5/tcl.h here's the result: -rw-r--r-- 1 root root 87291 abr 22 10:45 /usr/include/tcl8.5/tcl.h I have also tried what you suggested Could you run git reset --hard HEAD and git clean -d -f to clean up everything using Git? Then run ./configure again. Just a shot in the dark - I've seen some GNU automake stuff still listening to its "cached" version of the results or something. Still no solution. I don't know why it can't recognize the library though it is installed I opened configure to see where the program looked for the library. This is the code: # libraryPath: List of possible locations of Tcl/Tk library. set libraryPath { /usr/lib /usr/lib64 /usr/local/tcl/lib /usr/local/lib /usr/X11R6/lib /opt/tcltk/lib /usr/lib/x86_64-linux-gnu } lappend libraryPath "/usr/lib/tcl${tclv}" lappend libraryPath "/usr/lib/tk${tclv}" lappend libraryPath "/usr/lib/tcl${tclv_nodot}" lappend libraryPath "/usr/lib/tk${tclv_nodot}" # Try to add tcl_library and auto_path values to libraryPath, # in case the user has a non-standard Tcl/Tk library location: if {[info exists ::tcl_library]} { lappend headerPath \ [file join [file dirname [file dirname $::tcl_library]] include] lappend libraryPath [file dirname $::tcl_library] lappend libraryPath $::tcl_library } if {[info exists ::auto_path]} { foreach name $::auto_path { lappend libraryPath $name } } if {! [info exists var(TCL_INCLUDE)]} { puts -nonewline { Location of "tcl.h": } set opt(tcl_h) [findDir "tcl.h" $headerPath "TCL_VERSION.*$tclv"] if {$opt(tcl_h) == ""} { puts "not found" set success 0 set opt(tcl_h) "$::defaultVar(TCL_INCLUDE)" } else { puts $opt(tcl_h) } } set opt(tcl_lib) "" if {! [info exists var(TCL_LIBRARY)]} { puts -nonewline " Location of Tcl $tclv library: " set opt(tcl_lib) [findDir "libtcl${tclv}.*" $libraryPath] if {$opt(tcl_lib) == ""} { set opt(tcl_lib) [findDir "libtcl${tclv_nodot}.*" $libraryPath] if {$opt(tcl_lib) == ""} { puts "not found" set success 0 set opt(tcl_lib) "$opt(tcl_h)" set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" } else { set opt(tcl_lib_file) "tcl${tclv_nodot}" puts $opt(tcl_lib) } } else { set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" puts $opt(tcl_lib) } } if {! [info exists var(TCL_INCLUDE)]} { set var(TCL_INCLUDE) "-I$opt(tcl_h)" } if {! [info exists var(TCL_LIBRARY)]} { set var(TCL_LIBRARY) "-L$opt(tcl_lib) -l$opt(tcl_lib_file)" } return $success So I guess (And by guess I mean i have no idea how to code) I should write somewhere in here usr/lib/tcl8.5 and usr/lib/tk8.5, am I right?

    Read the article

  • Can't connect to wifi after 13.10 update - Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01)

    - by user1952119
    I updated Ubuntu to 13.10 last night and wifi was working fine until I went to wake up my computer this morning and no WiFi connection. I am on a iMac with Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01). The only solutions I have seen so far are for broadcomm WiFi drivers. There is no wifi driver in addition drivers only graphics drivers. Not sure how to fix this, Any help would be greatly appreciated. UPDATE: WiFi works after reboot but doesn't after being put to sleep nor does Ethernet connect after sleep.

    Read the article

  • Configure USB GSM Modem

    - by adisembiring
    I want to configure EVDO Usb Modem in Ubuntu 10.10 I insert my usb modem to laptop and check the usb is detected or not using $sudo lsusb and the result is: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE Bus 002 Device 002: ID 201e:2009 is my us device. and than I execute command $dmesg | grep -e tty [ 0.000000] console [tty0] enabled [ 818.054660] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 818.055125] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 818.055647] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 818.330641] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 818.330743] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 818.330840] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 1054.917473] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1054.917995] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1054.918481] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 1055.214087] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1055.214221] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1055.214356] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 Why converter disconnected from ttyUSB2 ? and than I try to execute command $sudo wvdialconf sorry, no modem was detected! Is it in use by another program ? did you configure it properly with setserials ? I change the same type usb modem from my friend, but I still get error above.

    Read the article

  • Kernel compile error with iw_ndis.c

    - by James
    Hi, I have a hp pavilion dm3t with intel HD graphics running ubuntu 10.10 64 bit. I'm trying to compile and install a patched kernel according to this, https://launchpad.net/~kamalmostafa/+archive/linux-kamal-mjgbacklight So I downloaded the tarball from here (linked to from the page above): http://kernel.ubuntu.com/git?p=kamal/ubuntu-maverick.git;a=shortlog;h=refs/heads/mjg-backlight I untar'd it to a directory, entered the directory and did: make defconfig I'm not sure if that's what I should have done but it was successful, so I did: make which seemed to work fine until it gave these errors: ubuntu/ndiswrapper/iw_ndis.c:1966: error: unknown field ‘num_private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1966: warning: initialization makes pointer from integer without a cast ubuntu/ndiswrapper/iw_ndis.c:1967: error: unknown field ‘num_private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: excess elements in struct initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: (near initialization for ‘ndis_handler_def’) ubuntu/ndiswrapper/iw_ndis.c:1970: error: unknown field ‘private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1970: warning: initialization makes integer from pointer without a cast ubuntu/ndiswrapper/iw_ndis.c:1970: error: initializer element is not computable at load time ubuntu/ndiswrapper/iw_ndis.c:1970: error: (near initialization for ‘ndis_handler_def.num_standard’) ubuntu/ndiswrapper/iw_ndis.c:1971: error: unknown field ‘private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1971: warning: initialization from incompatible pointer type make[2]: *** [ubuntu/ndiswrapper/iw_ndis.o] Error 1 make[1]: *** [ubuntu/ndiswrapper] Error 2 make: *** [ubuntu] Error 2 How can I compile and install this kernel successfully? I'm new to this and would appreciate any help.

    Read the article

  • Shell script issue: cron job script to Restart MySQL server when it stops accidentally

    - by Straw Hat
    I have this script, I am using it to setup CRON job to execute this script, so it can check if MySQL service is running; if not then it restart the MySQL service: #!/bin/bash service mysql status| grep 'mysql start/running' > /dev/null 2>&1 if [ $? != 0 ] then sudo service mysql restart fi I have setup cron job as. sudo crontab -e and then added, */1 * * * * /home/ubuntu/mysql-check.sh Problem is that it restart MySQL on every cron job execution.. even if server is running it restart the MySQL service what is correction in the script to do that.

    Read the article

  • I've filed an ITP bug on bugs.debian.org - now how do I get the package into Ubuntu?

    - by George Edison
    I've written a development library that I would like to include in the Ubuntu archives. From what I understand, the best way to do this is to first get the package into Debian and then request a package sync. Here is the ITP bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=691467 Now my question is simply... what do I do now? Looking at this page, I see horrifying things like "419 days in preparation" and "last activity 404 days ago". I get the impression that getting a package into Debian is a slow process. Is there anything I can do to speed up the process? I've tried to do as much work as I can to smooth out the process - I've got a branch with Debian packaging (which gets by Lintian without any errors).

    Read the article

  • i cant install the microsoft office 2007 in playonlinux

    - by iDarine
    after i installed playonlinux, i immediately installed the microsoft office 2007, i pasted an .iso image on my desktop and extracted it on a folder, and after that i installed it using the playonlinux, after several loadings the playonlinux prompted installing internet explorer 6 and after that, it said that office 2007 was succesfully installed, and i cant find where is office 2007 installed..can u help me?

    Read the article

  • Ctrl + C doesn't abort programs in terminal

    - by jake
    I changed the keyboard shortcut in terminal so that Ctrl + C would copy text. I realized I can't abort a program I am running since Ctrl + C used to be the abort command. I know that Ctrl + Shift + C works but want it switched back. Is there a way to revert the keyboard shortcuts to the real defaults before I decided to mess with it? What is the abort command defined as in keyboard shortcuts? Not a big program if I can't but it would be nice to know.

    Read the article

  • Xampp : http://localhost/xampp/splash.php :english : nothing happens

    - by Oussama Abdallah
    After I start Xampp on my Ubuntu 12.04 I go to the localhost and I come to the site, where all languages are listed .... when I click any of these languages nothing happens. Follow steps are already done: I started Xampp with: sudo /opt/lamp/lamp start after doing so, I get in the console, that everything is running: Starting XAMPP for Linux ... XAMPP: Starting Apache...ok. XAMPP: Starting MySQL... ok. XAMPP: Starting ProFTPD...ok. Can you please help me solve this problem?

    Read the article

  • some files just wont install- linux-image-3.5.0-42-generic

    - by jatin
    It gives the following details of the package operation failing after using the sofware updater on 12.10: installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 217566 files and directories currently installed.) Preparing to replace linux-image-3.5.0-36-generic 3.5.0-36.57~precise1 (using .../linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-36-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-36-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic Preparing to replace linux-image-3.5.0-42-generic 3.5.0-42.65~precise1 (using .../linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-42-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-42-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Preparing to replace memtest86+ 4.20-1.1ubuntu1 (using .../memtest86+_4.20-1.1ubuntu2.1_amd64.deb) ... Unpacking replacement memtest86+ ... dpkg: error processing /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb (--unpack): unable to make backup link of `./boot/memtest86+.bin' before installing new version: Operation not permitted No apport report written because MaxReports is reached already locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb Error in function: Output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda6 38G 6.5G 30G 19% / udev 3.5G 4.0K 3.5G 1% /dev tmpfs 1.5G 924K 1.5G 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 3.6G 296K 3.6G 1% /run/shm none 100M 64K 100M 1% /run/user /dev/sda1 197M 87M 111M 44% /boot /dev/sda5 243G 971M 230G 1% /home

    Read the article

  • Does "diff" exist for images?

    - by moose
    You can compare two text files very easy with diff and even better with meld: If you use diff for images, you get an example like this: $ diff zivi-besch.tif zivildienst.tif Binary files zivi-besch.tif and zivildienst.tif differ Here is an example: Original from http://commons.wikimedia.org/wiki/File:Tux.svg Edited: I've added a white background to both images and applied GIMPs "Difference" filter to get this: It is a very simple method how a diff could work, but I can imagine much better (and more complicated) ones. Do you know a program which works for images like meld does for texts? (If a program existed that could give a percentage (0% the same image - 100% the same image) I would also be interested in it, but I am looking for one that gives me visual hints where differences are.)

    Read the article

  • Where to find other versions of Opera browser as deb packages?

    - by cipricus
    I used Opera mainly for the Unite feature now to be abandoned. It is missing in v. 12. Some say its features will re-emerge in future extensions etc. Until then, Unite is still accessible in v. 11. Where do I get the v.11 deb? P.S. In fact it seems that opera unite (at least in its older form) is dying while I am editing this question. Access to opera-unite applications from within opera-unite is poor or absent. This issue is obscure to me for now (31.08.2012) because yesterday I have installed v12 in Windows OS (with opera-unite and basic applications - file sharing and media player - already installed) and it is still working (server is working). The v12 Ubuntu version came today without unite, and after installing v11 (which has unite) I could not get applications (file sharing, etc). But they are still available: here and after downloading these files which have te .ua extension, they can be installed by opening them with Opera (v.11) But as opera-unite is no longer supported, it is possible that the server that provides the file sharing etc will soon be unaccessible. Even if that is the case the question should maybe not be closed at it has a general usefulness independently of the unite issue.

    Read the article

  • "dm-tool lock" doesn't lock my session

    - by cape1232
    When I use dm-tool to lock the screen for userA, I can log in as userB and then use dm-tool to switch back to userA's session without having to enter a password. Is that the expected behavior? If not, how should I switch from A to B without leaving userA exposed? userA$ dm-tool lock -- Shows Greeter. Login as userB. userB$ dm-tool switch-to-user userA -- Expected this to go to greeter, but it goes right back to userA's session. Do I have something mis-configured, or what?

    Read the article

  • VBoxManage modifyhd --resize doesn't exist?

    - by George Korac
    I'm trying to increase the size of a VirtualBox Win7 .vdi disk on Ubuntu 10.04 but when I try executing VBoxManage modifyhd /path/disk.vdi --resize 15360 it returns Syntax error: unknown option: --resize. I'm unsure as to why this is happening because I've used it before and it's still listed under valid options for VBoxManage modifyhd in the VirualBox User Manual . Cheers, George @maniat1k george@george-laptop:~$ VBoxManage modifyhd '/home/george/.VirtualBox/HardDisks/Windows 7 64bit.vdi' --resize 15360 Sun VirtualBox Command Line Management Interface Version 3.1.6_OSE (C) 2005-2010 Sun Microsystems, Inc. All rights reserved. Usage: VBoxManage modifyhd | [--type normal|writethrough|immutable] [--autoreset on|off] [--compact] Syntax error: unknown option: --resize

    Read the article

  • How do I remove lubuntu-desktop?

    - by Alvar
    I wanted to try lubuntu-desktop so I installed it with sudo apt-get install lubuntu-desktop. But when I didn't like it I wanted to remove it with sudo apt-get remove lubuntu-desktop(then with auto-remove) but my startup / shutdown screen does still say lubuntu. So how do I remove lubuntu-desktop? Atempt one: sudo apt-get remove lubuntu-desktop lubuntu-artwork playmouth-theme-lubuntu-logo playmouth-theme-lubuntu-text I was unable to locate any of those packages. I've also tried to remove and install ubuntu-desktop, but none has worked.

    Read the article

  • Why does Dropbox fail with a "dropboxd not found" error?

    - by Kevin
    This is a fresh install of Dropbox on a 12.04 server running on a 32bit system. It does not seem to fail the installation, but when I try to run it, I am told it can't find the file. Following the instructions on the Dropbox site, I get the following message: /home/kevin/.dropbox-dist/dropboxd: 10: exec: /home/kevin/.dropbox-dist/dropbox: not found Permissions currently being used: $ ls -l ~/.dropbox-dist/dropboxd -rwxrwxrwx 1 kevin kevin 258 Jun 13 20:40 /home/kevin/.dropbox-dist/dropboxd Has anyone had this problem and know a work around?

    Read the article

  • How can I re-open the TrueCrypt window after it's been closed?

    - by user27451
    I installed TrueCrypt 7.1 Standard 64-bit on a fresh install of Ubuntu 11.10 64-bit. After finding the application in the dash I dragged it's icon onto the Unity launcher. I then clicked that icon and TrueCrypt's main window opened. I mounted my encrypted file/volume and then closed the window to do some work. To re-open the TrueCrypt window I would normally click the small blue TrueCrypt icon that appears on the top panel. In Ubuntu 11.10 that icon is no longer there. I receive a message ("TrueCrypt is already running.") if I click on the TrueCrypt icon in the launcher. How can I re-open the TrueCrypt window after it's been closed in Ubuntu 11.10?

    Read the article

  • no entry for / in /etc/fstab

    - by valya
    Hello! I can't find an entry for mounting "/" in /etc/fstab (I was hoping to set commit value to something big because my HDD is pretty slow): [.../fest]$ cat /etc/fstab # UNCONFIGURED FSTAB FOR BASE SYSTEM /dev/sda3 /media/megahard ntfs-3g defaults,locale=en_US.UTF-8 0 0 /mnt/2Gb.swap none swap sw 0 0 [.../fest]$ cat /etc/issue Ubuntu 10.10 \n \l Netbook Remix, installed with chroot from Wubi (it's not Wubi, it's just installed from it)

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >