Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 78/1036 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

  • Shutdown Hangs for 5 Minutes on Kubuntu 14.04

    - by Augustinus
    I've had persistent problems with a 5 minute hang at shutdown for the last three versions of Kubuntu (13.04, 13.10, and now 14.04). I suspect this is not a KDE-specific problem. Recently, I performed a fresh installation of Kubuntu 14.04 from a live-USB, and shutdown worked normally for about a week. The hang-up is now happening again, and I can't figure out why. A brief description of the problem: The hang-up occurs with all methods of initiating a normal shutdown: Clicking the shutdown or restart button in KDE, sudo shutdown -h now, sudo reboot The shutdown splash screen appears. Using the down-arrow to access verbose messages, I see "Asking all remaining processes to terminate." This message remains for 5 minutes with no disk activity. Finally, a rapid series of messages flurries to the screen: * All processes ended within 300 seconds... [ OK ] nm-dispatcher.action: Caught signal 15, shutting down... ModemManager[852]: <warn> Could not acquire the 'org.freedesktop.ModemManager1' service name ModemManager[852]: <info> ModemManager is shut down * Deactivating swap... [ OK ] * Unmounting local filesystems... [ OK ] * Will now restart` Possible Sources of the Problem: Before the problem re-appeared, I have mainly been doing routine computing. I have kept the system up-to-date using apt-get upgrade and apt-get dist-upgrade. The only other notable incident was a power failure. I do not have the computer connected to a UPS, so the power failure resulted in an immediate shutdown. Could this have corrupted an important file which must be accessed at shutdown? Is there any way that could cause a 5-minute hang-up? Here is a list of packages that have been updated before the problem appeared: bash iotop dpkg dpkg-dev python3-software-properties libdpkg-perl software-properties-kde software-properties-common akonadi-backend-mysql libakonadiprotocolinternals1 akonadi-server firefox-locale-en firefox flashplugin-installer libqapt2 libqapt2-runtime thunderbird openjdk-7-jre-headless thunderbird-locale-en kubuntu-driver-manager qapt-deb-installer openjdk-7-jre qapt-batch icedtea-7-jre-jamvm libelf1 dpkg dpkg-dev libdpkg-perl libjbig0 gettext-base libgettextpo-dev libssl1.0.0 libgettextpo0 libasprintf-dev linux-headers-3.13.0-24 gettext libasprintf0c2 linux-headers-3.13.0-24-generic openssl linux-libc-dev gstreamer0.10-qapt kubuntu-desktop linux-image-extra-3.13.0-24-generic linux-image-3.13.0-24-generic I would appreciate any help with this.

    Read the article

  • RT3290 Bluetooth not pairing in Ubuntu 14.04

    - by Nashhole
    I recently followed the instructions listed in the following link to get my RT3290 bluetooth working on my laptop. These instructions have yielded the most progress I have had in the year I have had this laptop. My machine now sees my bluetooth, I can scan for and see devices, and other devices and see my laptop, but pairing continually fails. Ralink RT 3290 Bluetooth Problem on Ubuntu 14.04 -lscpi reads 04:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth -rfkill list reads 0: hci0: Bluetooth Soft blocked: no Hard blocked: no -dmesg | grep Blue reads [ 5.965811] Bluetooth: Core ver 2.17 [ 5.965833] Bluetooth: HCI device and connection manager initialized [ 5.965840] Bluetooth: HCI socket layer initialized [ 5.965842] Bluetooth: L2CAP socket layer initialized [ 5.965847] Bluetooth: SCO socket layer initialized [ 6.038085] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.038088] Bluetooth: BNEP filters: protocol multicast [ 6.038096] Bluetooth: BNEP socket layer initialized [ 6.058013] Bluetooth: RFCOMM TTY layer initialized [ 6.058024] Bluetooth: RFCOMM socket layer initialized [ 6.058029] Bluetooth: RFCOMM ver 1.11 Any one have any thoughts or ideas I could try? Thanks in advance for your time and assistance.

    Read the article

  • Unable to run Tor even in terminal, Vidalia exit code 127

    - by Ubuntu Newb
    I'm using Ubuntu 12.10 (quantal) and I recently installed Tor (32 bits) following the instructions on the Tor project's page. Then I started the script after having it extracted from the console and got this: master@ubuntu:~/tor-browser_en-US$ ./start-tor-browser Launching Tor Browser Bundle for Linux in /home/master/tor-browser_en-US ./start-tor-browser: 225: ./start-tor-browser: ./App/vidalia: not found Vidalia exited abnormally. Exit code: 127 Then I ran Vidalia from the console and: master@ubuntu:~/tor-browser_en-US$ vidalia (<unknown>:11354): IBUS-WARNING **: Unable to load /var/lib/dbus/machine-id: Failed to open file '/var/lib/dbus/machine-id': Permission denied master@ubuntu:~/tor-browser_en-US$ vidalia (<unknown>:11358): IBUS-WARNING **: Unable to load /var/lib/dbus/machine-id: Failed to open file '/var/lib/dbus/machine-id': Permission denied And after Vidalia's GUI opens I get the error prompt about starting Tor: "Vidalia was unable to start Tor. Check your settings to ensure the correct name and location of your Tor executable is specified." How can I start Tor?

    Read the article

  • VLC 2.0.3 on Lubuntu 12.04: No audio?

    - by drezabek
    I am on Lubuntu 12.04, and I have installed VLC media player version 2.0.3. When I try and play an audio file, it appears to load fine, and the media position bar displays the progress, and it says it is playing, but I can't here any thing through my speakers. I can hear game audio, web audio, and audio from SMPlayer just fine, but with VLC, I can't here anything. Below is the "Messages" output with the verbosity option set to "2 (debug)" main debug: processing request item: The Bottom, node: Playlist, skip: 0 main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: starting playback of the new playlist item main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: creating new input thread main debug: Creating an input for 'The Bottom' main debug: TIMER input launching for 'Floex - Machinarium Soundtrack - 01 The Bottom.flac' : 23.706 ms - Total 23.706 ms / 1 intvls (Avg 23.706 ms) main debug: using timeshift granularity of 50 MiB, in path '/tmp' main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' gives access `file' demux `' path `/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access_demux module: 3 candidates main debug: no access_demux module matching "file" could be loaded main debug: TIMER module_need() : 2.332 ms - Total 2.332 ms / 1 intvls (Avg 2.332 ms) main debug: creating access 'file' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac', path='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access module: 2 candidates filesystem debug: opening file `/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: using access module "filesystem" main debug: TIMER module_need() : 0.762 ms - Total 0.762 ms / 1 intvls (Avg 0.762 ms) main debug: Using stream method for AStream* main debug: starting pre-buffering main debug: received first data after 0 ms main debug: pre-buffering done 1024 bytes in 0s - 43478 KiB/s main debug: looking for stream_filter module: 7 candidates main debug: no stream_filter module matching "any" could be loaded main debug: TIMER module_need() : 0.236 ms - Total 0.236 ms / 1 intvls (Avg 0.236 ms) main debug: looking for stream_filter module: 1 candidate main debug: using stream_filter module "stream_filter_record" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for demux module: 54 candidates flacsys debug: Picture type=3 mime=image/png description='' file length=679371 qt4 debug: IM: Setting an input main debug: looking for packetizer module: 21 candidates main debug: using packetizer module "packetizer_flac" main debug: TIMER module_need() : 0.211 ms - Total 0.211 ms / 1 intvls (Avg 0.211 ms) main debug: using demux module "flacsys" main debug: TIMER module_need() : 4.023 ms - Total 4.023 ms / 1 intvls (Avg 4.023 ms) main debug: looking for a subtitle file in /home/doug/Music/unsorted/Floex - Machinarium Soundtrack/ main debug: looking for meta reader module: 2 candidates main debug: using meta reader module "taglib" main debug: TIMER module_need() : 5.245 ms - Total 5.245 ms / 1 intvls (Avg 5.245 ms) main debug: removing module "taglib" main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' successfully opened main debug: selecting program id=0 main debug: looking for decoder module: 30 candidates main debug: using decoder module "flac" main debug: TIMER module_need() : 0.442 ms - Total 0.442 ms / 1 intvls (Avg 0.442 ms) main debug: Buffering 0% flac debug: decode STREAMINFO flac debug: channels:2 samplerate:44100 bitspersamples:16 flac debug: STREAMINFO decoded main debug: Buffering 30% main debug: recycling audio output main debug: looking for audio output module: 3 candidates main debug: Buffering 61% pulse debug: using stereo channel map pulse debug: using library version 1.1.0 pulse debug: (compiled with version 1.1.0, protocol 26) main debug: Buffering 92% main debug: Stream buffering done (371 ms in 2 ms) pulse debug: connected locally to unix:/home/doug/.pulse/dce22254e867f905188a2ce200000003-runtime/native as client #14 pulse debug: using protocol 26, server protocol 26 pulse debug: using buffer metrics: maxlength=4194304, tlength=9880, prebuf=0, minreq=3528 pulse debug: connected to sink 0: alsa_output.pci-0000_00_14.2.analog-stereo main debug: using audio output module "pulse" main debug: TIMER module_need() : 4.571 ms - Total 4.571 ms / 1 intvls (Avg 4.571 ms) main debug: output 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'f32l'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: f32l->s16l, bits per sample: 32->16 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.187 ms - Total 0.187 ms / 1 intvls (Avg 0.187 ms) main debug: conversion pipeline completed main debug: looking for audio mixer module: 2 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.125 ms - Total 0.125 ms / 1 intvls (Avg 0.125 ms) main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: looking for audio filter module: 1 candidate scaletempo debug: format: 44100 rate, 2 nch, 4 bps, fl32 scaletempo debug: params: 30 stride, 0.200 overlap, 14 search scaletempo debug: 1.000 scale, 1323.000 stride_in, 1323 stride_out, 1059 standing, 264 overlap, 617 search, 2204 queue, fl32 mode main debug: using audio filter module "scaletempo" main debug: TIMER module_need() : 0.233 ms - Total 0.233 ms / 1 intvls (Avg 0.233 ms) main debug: filter(s) 's16l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo pulse debug: listing sink alsa_output.pci-0000_00_14.2.analog-stereo (0): Built-in Audio Analog Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: s16l->f32l, bits per sample: 16->32 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.147 ms - Total 0.147 ms / 1 intvls (Avg 0.147 ms) main debug: conversion pipeline completed pulse debug: base volume: 65536 main debug: looking for audio filter module: 1 candidate equalizer debug: equalizer loaded for 44100 Hz with 10 bands 2 pass equalizer debug: 60 Hz -> factor:0.000000 alpha:0.003013 beta:0.993973 gamma:1.993901 equalizer debug: 170 Hz -> factor:0.000000 alpha:0.008490 beta:0.983019 gamma:1.982437 equalizer debug: 310 Hz -> factor:0.000000 alpha:0.015374 beta:0.969252 gamma:1.967331 equalizer debug: 600 Hz -> factor:0.000000 alpha:0.029328 beta:0.941343 gamma:1.934254 equalizer debug: 1000 Hz -> factor:0.000000 alpha:0.047918 beta:0.904163 gamma:1.884869 equalizer debug: 3000 Hz -> factor:0.000000 alpha:0.130408 beta:0.739184 gamma:1.582718 equalizer debug: 6000 Hz -> factor:0.000000 alpha:0.226555 beta:0.546889 gamma:1.015267 equalizer debug: 12000 Hz -> factor:0.000000 alpha:0.344937 beta:0.310127 gamma:-0.181410 equalizer debug: 14000 Hz -> factor:0.000000 alpha:0.366438 beta:0.267123 gamma:-0.521151 equalizer debug: 16000 Hz -> factor:0.000000 alpha:0.379009 beta:0.241981 gamma:-0.808451 main debug: using audio filter module "equalizer" main debug: TIMER module_need() : 0.353 ms - Total 0.353 ms / 1 intvls (Avg 0.353 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: looking for visualization2 module: 1 candidate main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 3.278 ms - Total 3.278 ms / 1 intvls (Avg 3.278 ms) main debug: looking for video filter2 module: 18 candidates swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: RGBA with scaling using Bicubic (good quality) main debug: using video filter2 module "swscale" main debug: TIMER module_need() : 1.037 ms - Total 1.037 ms / 1 intvls (Avg 1.037 ms) main debug: looking for video filter2 module: 18 candidates yuvp debug: YUVP to YUVA converter main debug: using video filter2 module "yuvp" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: Deinterlacing available main debug: deinterlace 0, mode blend, is_needed 0 main debug: Opening vout display wrapper main debug: looking for vout display module: 6 candidates main debug: looking for vout window xid module: 4 candidates qt4 debug: requesting video... qt4 debug: Video was requested 0, 0 main debug: using vout window xid module "qt4" main debug: TIMER module_need() : 61.671 ms - Total 61.671 ms / 1 intvls (Avg 61.671 ms) main debug: looking for inhibit module: 2 candidates main debug: using inhibit module "xdg_screensaver" main debug: TIMER module_need() : 0.336 ms - Total 0.336 ms / 1 intvls (Avg 0.336 ms) xdg_screensaver debug: started xdg-screensaver (PID = 6682) xcb_xv debug: connected to X11.0 server xcb_xv debug: vendor : The X.Org Foundation xcb_xv debug: version: 11103000 xcb_xv debug: using screen 0x15a xcb_xv debug: using XVideo extension v2.2 xcb_xv debug: using adaptor NV17 Video Texture xcb_xv debug: using port 310 xcb_xv debug: using image format 0x30323449 xcb_xv debug: using X11 visual ID 0x21 (depth: 24) xcb_xv debug: using X11 window 0x03400000 xcb_xv debug: using X11 graphic context 0x03400002 main debug: VoutDisplayEvent 'fullscreen' 0 main debug: VoutDisplayEvent 'resize' 800x500 window main debug: using vout display module "xcb_xv" main debug: TIMER module_need() : 69.890 ms - Total 69.890 ms / 1 intvls (Avg 69.890 ms) main debug: original format sz 800x500, of (0,0), vsz 800x500, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: removing module "freetype" main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 4.552 ms - Total 4.552 ms / 1 intvls (Avg 4.552 ms) main debug: using visualization2 module "visual" main debug: TIMER module_need() : 84.104 ms - Total 84.104 ms / 1 intvls (Avg 84.104 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates main debug: using audio filter module "samplerate" main debug: TIMER module_need() : 0.375 ms - Total 0.375 ms / 1 intvls (Avg 0.375 ms) main debug: conversion pipeline completed main debug: End of audio preroll main debug: Decoder buffering done in 91 ms main warning: PTS is out of range (-9269), dropping buffer pulse debug: deferring start (190703 us) main debug: looking for video blending module: 1 candidate main debug: using video blending module "blend" main debug: TIMER module_need() : 0.275 ms - Total 0.275 ms / 1 intvls (Avg 0.275 ms) main debug: Detected interlaced video main debug: deinterlace 0, mode blend, is_needed 1 xcb_xv debug: display is visible pulse debug: starting deferred pulse warning: too late by 93760 us pulse debug: changed sample rate to 44186 Hz pulse debug: started pulse warning: too late by 94474 us pulse debug: changed sample rate to 44229 Hz pulse warning: too late by 93532 us pulse debug: changed sample rate to 44272 Hz pulse warning: too late by 92829 us pulse debug: changed sample rate to 44315 Hz pulse warning: too late by 92132 us pulse debug: changed sample rate to 44358 Hz xcb_xv debug: display is visible pulse warning: too late by 91534 us pulse debug: changed sample rate to 44401 Hz xcb_xv debug: display is visible pulse warning: too late by 89482 us pulse debug: changed sample rate to 44440 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible pulse warning: too late by 87529 us pulse debug: changed sample rate to 44479 Hz pulse warning: too late by 84577 us pulse debug: changed sample rate to 44504 Hz main debug: auto hiding mouse cursor pulse warning: too late by 78562 us pulse debug: changed sample rate to 44492 Hz pulse warning: too late by 68015 us pulse debug: changed sample rate to 44422 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor pulse debug: changed sample rate to 44336 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor I have had issues with VLC in the past- the audio quality was extremely crackly, as if the headphone jack was plugged in only half way, and the sounds were extremely sharp and caused my speakers to make a ringing/vibrating noise... It would eventually start working after I messed around with the audio settings, but it happened every restart. I eventually switched to SMPlayer, but now I need some of the features that VLC offers, but I still can't use VLC. At this point, the audio can not be heard at all, and the method I used before, messing around with the audio settings, isn't getting me anywhere. (note, I reposted this on VideoLan's forums, link is here: http://forum.videolan.org/viewtopic.php?f=13&t=104726) Please let me know if you need more information, or are confused by something I posted! Thanks!

    Read the article

  • how to access inaccessible mac os x hard drive via ubuntu

    - by jon
    Background: My intention was to load a Virtual Machine (VM) on my Mac OS X Snow Leopard. My Mac had just enough room for a VM (my thought process was that VM was the same as partition) However, I burned the newest version of Ubuntu onto a CD, thinking that partitioning and running a virtual machine would be the same. I would restart my computer, booting up Ubuntu installer. The installation would not allow me to partition, forcing me to force shutdown my laptop. when I turn on my laptop, I see that my computer is "missing operating system". So, can someone help me fix my a) bootcamp, b) getting files and if a and b are fixed c) to install ubuntu as a VM?

    Read the article

  • login to account reverts to login screen, guest login ok

    - by Emil Hansen
    When I get to the login screen, I put my password, and I only get a black screen for 2 seconds, then we're back at the login screen. When I log in to the guest account everything works perfectly. What I've tried; I deleted .Xauthority as per instructions from elsewhere. No luck I removed 2 lines I put in .profile. No change Installed Gnome, but Unity, Unity 2D, various vers of gnome, same thing. according to other q/a's, this could be caused by lack of disk space. I have 80 gigs free, so I would assume it's not that if I Ctrl+Alt+F2 at login, I can login in to my account in the "terminal" with no problem. I would really appreciate any help to restore my account, and thank you very much beforehand

    Read the article

  • Udev webcam rule read, but not respected?

    - by user89305
    I have two usb-webcams on them machine, but at bot they some switch /dev/video number. The solution to this problem seems to be new udev rule. I have added this rule in/etc/udev/rules.d/jj-video.rules: Fix webcam 1 KERNEL=="video1", SUBSYSTEM=="video4linux", SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d6b", ATTRS{idProduct}=="0001", SYMLINK+="webcam1" Fix webcam 2 KERNEL=="video2", SUBSYSTEM=="video4linux", ATTR{name}=="Logitech QuickCam Pro 3000", KERNELS=="0000:00:1d.0", SUBSYSTEMS=="pci", DRIVERS=="uhci_hcd", ATTRS{vendor}=="0x8086", ATTRS##{device}=="0x2658", SYMLINK+="webcam2" but the symlinks are not created. I have tried many different combinations in this file. The present ones are just my lates attempts. I found the parameters in: jjk@eee-old:~$ udevadm info -a -p $(udevadm info -q path -p /class/video4linux/video1) Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1': KERNEL=="video1" SUBSYSTEM=="video4linux" DRIVER=="" ATTR{name}=="Logitech QuickCam Pro 3000" ATTR{index}=="0" ATTR{button}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0': KERNELS=="2-2:1.0" SUBSYSTEMS=="usb" DRIVERS=="Philips webcam" ATTRS{bInterfaceNumber}=="00" ATTRS{bAlternateSetting}==" 9" ATTRS{bNumEndpoints}=="02" ATTRS{bInterfaceClass}=="0a" ATTRS{bInterfaceSubClass}=="ff" ATTRS{bInterfaceProtocol}=="00" ATTRS{supports_autosuspend}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2': KERNELS=="2-2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 3" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="a0" ATTRS{bMaxPower}=="500mA" ATTRS{urbnum}=="371076" ATTRS{idVendor}=="046d" ATTRS{idProduct}=="08b0" ATTRS{bcdDevice}=="0002" ATTRS{bDeviceClass}=="00" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="2" ATTRS{devpath}=="2" ATTRS{version}==" 1.10" ATTRS{maxchild}=="0" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{serial}=="01402100A5000000" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2': KERNELS=="usb2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bMaxPower}==" 0mA" ATTRS{urbnum}=="34" ATTRS{idVendor}=="1d6b" ATTRS{idProduct}=="0001" ATTRS{bcdDevice}=="0302" ATTRS{bDeviceClass}=="09" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="1" ATTRS{devpath}=="0" ATTRS{version}==" 1.10" ATTRS{maxchild}=="2" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{manufacturer}=="Linux 3.2.0-29-generic uhci_hcd" ATTRS{product}=="UHCI Host Controller" ATTRS{serial}=="0000:00:1d.0" ATTRS{authorized_default}=="1" looking at parent device '/devices/pci0000:00/0000:00:1d.0': KERNELS=="0000:00:1d.0" SUBSYSTEMS=="pci" DRIVERS=="uhci_hcd" ATTRS{vendor}=="0x8086" ATTRS{device}=="0x2658" ATTRS{subsystem_vendor}=="0x1043" ATTRS{subsystem_device}=="0x82d8" ATTRS{class}=="0x0c0300" ATTRS{irq}=="23" ATTRS{local_cpus}=="ff" ATTRS{local_cpulist}=="0-7" ATTRS{dma_mask_bits}=="32" ATTRS{consistent_dma_mask_bits}=="32" ATTRS{broken_parity_status}=="0" ATTRS{msi_bus}=="" looking at parent device '/devices/pci0000:00': KERNELS=="pci0000:00" SUBSYSTEMS=="" DRIVERS=="" jjk@eee-old:~$ And tested the setup: sudo udevadm --debug test /sys/class/video4linux/video1 main: runtime dir '/run/udev' run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-gnupg.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-hplip.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ia64.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-inputattach.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libgphoto2-2.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libsane.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ppc.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-xserver-xorg-video-intel.rules' as rules file parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-firmware.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file parse_file: reading '/lib/udev/rules.d/55-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/56-hpmud_support.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-cdrom_id.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-pcmcia.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file parse_file: reading '/lib/udev/rules.d/61-accelerometer.rules' as rules file parse_file: reading '/lib/udev/rules.d/64-xorg-xkb.rules' as rules file parse_file: reading '/lib/udev/rules.d/66-xorg-synaptics-quirks.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 parse_file: reading '/lib/udev/rules.d/69-libmtp.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xorg-vmmouse.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xserver-xorg-input-wacom.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-printers.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-udev-acl.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-cd-aliases-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-net-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-persistent-net-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-ericsson-mbm.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-longcheer-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-nokia-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-pcmcia-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-platform-serial-whitelist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-qdl-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-simtech-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-x22x-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-zte-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-nm-olpc-mesh.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-graphics-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-drivers.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-mm-candidate.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-udisks.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-brltty.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hdparm.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hplj10xx.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-keyboard-configuration.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-regulatory.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-restore.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-ucm.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-libgpod.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-pulseaudio.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-cd-devices.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keyboard-force-release.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keymap.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-udev-late.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-dell.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-gateway.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-ibm.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-csr.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file parse_file: reading '/etc/udev/rules.d/jj-video.rules' as rules file udev_rules_new: rules use 259284 bytes tokens (21607 * 12 bytes), 37913 bytes buffer udev_rules_new: temporary index used 67520 bytes (3376 * 20 bytes) udev_device_new_from_syspath: device 0x215103e0 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_new_from_syspath: device 0x21510758 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_read_db: device 0x21510758 filled with db file data udev_device_new_from_syspath: device 0x21510e10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0' udev_device_new_from_syspath: device 0x21511b10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2' udev_device_new_from_syspath: device 0x215132f8 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2' udev_device_new_from_syspath: device 0x21513650 has devpath '/devices/pci0000:00/0000:00:1d.0' udev_device_new_from_syspath: device 0x21513980 has devpath '/devices/pci0000:00' udev_rules_apply_to_event: GROUP 44 /lib/udev/rules.d/50-udev-default.rules:29 udev_rules_apply_to_event: IMPORT 'v4l_id /dev/video1' /lib/udev/rules.d/60-persistent-v4l.rules:7 udev_event_spawn: starting 'v4l_id /dev/video1' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_VERSION=2' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_PRODUCT=Logitech QuickCam Pro 3000' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_CAPABILITIES=:capture:' spawn_wait: 'v4l_id /dev/video1' [2609] exit with return code 0 udev_rules_apply_to_event: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-v4l.rules:9 builtin_usb_id: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0: if_class 10 protocol 0 udev_builtin_add_property: ID_VENDOR=046d udev_builtin_add_property: ID_VENDOR_ENC=046d udev_builtin_add_property: ID_VENDOR_ID=046d udev_builtin_add_property: ID_MODEL=08b0 udev_builtin_add_property: ID_MODEL_ENC=08b0 udev_builtin_add_property: ID_MODEL_ID=08b0 udev_builtin_add_property: ID_REVISION=0002 udev_builtin_add_property: ID_SERIAL=046d_08b0_01402100A5000000 udev_builtin_add_property: ID_SERIAL_SHORT=01402100A5000000 udev_builtin_add_property: ID_TYPE=generic udev_builtin_add_property: ID_BUS=usb udev_builtin_add_property: ID_USB_INTERFACES=:0aff00:010100:010200: udev_builtin_add_property: ID_USB_INTERFACE_NUM=00 udev_builtin_add_property: ID_USB_DRIVER=Philips webcam udev_rules_apply_to_event: LINK 'v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:10 udev_rules_apply_to_event: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-v4l.rules:16 udev_builtin_add_property: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 udev_builtin_add_property: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 udev_rules_apply_to_event: LINK 'v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:17 udev_rules_apply_to_event: RUN 'udev-acl --action=$env{ACTION} --device=$env{DEVNAME}' /lib/udev/rules.d/70-udev-acl.rules:74 udev_rules_apply_to_event: LINK 'webcam1' /etc/udev/rules.d/jj-video.rules:2 udev_event_execute_rules: no node name set, will use kernel supplied name 'video1' udev_node_add: creating device node '/dev/video1', devnum=81:1, mode=0660, uid=0, gid=44 udev_node_mknod: preserve file '/dev/video1', because it has correct dev_t udev_node_mknod: preserve permissions /dev/video1, 020660, uid=0, gid=44 node_symlink: preserve already existing symlink '/dev/char/81:1' to '../video1' link_find_prioritized: found 'c81:2' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' udev_device_new_from_syspath: device 0x21516748 has devpath '/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/video4linux/video2' udev_device_read_db: device 0x21516748 filled with db file data link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' link_update: creating link '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' to '/dev/video1' node_symlink: atomically replace '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-path\x2fpci-0000:00:1d.0-usb-0:2:1.0-video-index0' link_update: creating link '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '../../video1' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/webcam1' link_update: creating link '/dev/webcam1' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/webcam1' to 'video1' udev_device_update_db: created db file '/run/udev/data/c81:1' for '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' ACTION=add COLORD_DEVICE=1 COLORD_KIND=camera DEVLINKS=/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0 /dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0 /dev/webcam1 DEVNAME=/dev/video1 DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1 ID_BUS=usb ID_MODEL=08b0 ID_MODEL_ENC=08b0 ID_MODEL_ID=08b0 ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 ID_REVISION=0002 ID_SERIAL=046d_08b0_01402100A5000000 ID_SERIAL_SHORT=01402100A5000000 ID_TYPE=generic ID_USB_DRIVER=Philips webcam ID_USB_INTERFACES=:0aff00:010100:010200: ID_USB_INTERFACE_NUM=00 ID_V4L_CAPABILITIES=:capture: ID_V4L_PRODUCT=Logitech QuickCam Pro 3000 ID_V4L_VERSION=2 ID_VENDOR=046d ID_VENDOR_ENC=046d ID_VENDOR_ID=046d MAJOR=81 MINOR=1 SUBSYSTEM=video4linux TAGS=:udev-acl: UDEV_LOG=6 USEC_INITIALIZED=18213768 run: 'udev-acl --action=add --device=/dev/video1' jjk@eee-old:~$ (and correspondingly for video2) It looks to me like my rules are read, but not respected. What am I doing wrong?

    Read the article

  • How do i find out which program is using internet and how much?

    - by Anwar Shah
    Sometimes there are unusual Internet activity in my Computer. Modem's lights are always blinking and When I open system monitor, I see there some unknown program is using my precious Internet with 64KB/S (I have 512kbps connection). Still I am in a firefox session with only one tab opened, and the page in already loaded and there is no indication of busy sign in the page (that rotating orange circle). In that situation I unplug my modem and reconnect it again. After several times doing this, that unusual activity stops. It annoys me very much. How can I find out the process which is using the Internet?. How much they are using? How can I kill it? A graphical solution will be better.

    Read the article

  • How can I check if Python´s ConfigParser has a section or not?

    - by Voidcode
    How can I check if the ConfigParser mainfile has a section or not, And if it don´t then add a new section to it? I am trying with this code: import ConfigParser config = ConfigParser.ConfigParser() #if the config file don´t has the section 'globel', then add it to the config-file if not config.has_section("globel"): config.add_section("globel") config.set("globel", "settings", "someting") config.write(open("/tmp/myfile.conf", "w")) print "The new sestion globel is now added!!" #else just return the the value of globle->settings else: config.read("/tmp/myfile.conf") print "else... globle->settings == "+config.get("globel", "settings")

    Read the article

  • Cannot connect to google talk using empathy/pidgin after upgrading

    - by levesque
    I can't seem to be able to connect to google talk using either pidgin or empathy after upgrading to Ubuntu 10.10 (fresh install). I do not know why... empathy just writes "Connecting ..." forever and never connects. What can I do from there? Google talk's web interface works just fine for me so I doubt it is a firewall issue. EDIT: In fact sometimes it's able to connect (empathy), it just takes a LOOONG time (I'd say about 5 mins), longer than I am willing to wait. On the other hand, the web interface is able to connect in seconds.

    Read the article

  • Scale plugin keeps forgetting hot corner settings on restart

    - by Michael Butler
    I'm using Ubuntu 12.04 with Unity, which I suppose uses Compiz as well. I have Compiz Settings Manager, and make the top left and bottom left corners of my screen activate the "Scale" (like Exposé) function to scale and show all windows. The problem is that when I restart the computer, the hot corners no longer do anything. I have to go back into compiz settings manager, delete the hot corner option, and then set it again. Something seems to be overriding or deleting the compiz hot corner setting on restart. Update: Sometimes, the setting loses its footing even while the computer is running. I haven't figured out yet what triggers it.

    Read the article

  • Help with a simple incremental backup script

    - by Evan
    I'd like to run the following incomplete script weekly in as a cron job to backup my home directory to an external drive mounted as /mnt/backups #!/bin/bash # TIMEDATE=$(date +%b-%d-%Y-%k:%M) LASTBACKUP=pathToDirWithLastBackup rsync -avr --numeric-ids --link-dest=$LASTBACKUP /home/myfiles /mnt/backups/myfiles$TIMEDATE My first question is how do I correctly set LASTBACKUP to the the the directory in /backs most recently created? Secondly, I'm under the impression that using --link-desk will mean that files in previous backups will not will not copied in later backups if they still exist but will rather symbolically link back to the originally copied files? However, I don't want to retain old files forever. What would be the best way to remove all the backups before a certain date without losing files that may think linked in those backups by currents backups? Basically I'm looking to merge all the files before a certain date to a certain date if that makes more sense than the way I initially framed the question :). Can --link-dest create hard links, and if so, just deleting previous directories wouldn't actually remove linked file? Finally I'd like to add a line to my script that compresses each newly created backup folder (/mnt/backups/myfiles$TIMEDATE). Based on reading this question, I was wondering if I could just use this line gzip --rsyncable /backups/myfiles$TIMEDATE after I run rsync so that sequential rsync --link-dest executions would find already copied and compressed files? I know that's a lot, so many thanks in advance for your help!!

    Read the article

  • Window management shortcuts?

    - by pwnguin
    I've got a single massive monitor at home, and I've decided to mimic the Windows 7 window tiling shortcuts. I found a few guides online using wmctrl, and it's going well, save one thing: maximized windows don't respond to it. gconftool-2 --type string --set /apps/metacity/keybinding_commands/command_1 "wmctrl -r :ACTIVE: -e 0, 0,0, `xwininfo -root | grep Width | awk '{ print ($2/2)}'`, `xwininfo -root | grep Height | awk '{ print $2 }'`" (I've added line returns to make an otherwise massive one-liner readable.) I've bound this to a hotkey and it works, unless the window is maximized. Any ideas on how to fix this up?

    Read the article

  • Wifi will not connect with an Intel Wifi Link 1000

    - by Wallace Panter
    I have an HP dv7t-6100CTO laptop. I have linux ubuntu 12.04 lts dual booted. The specs of my laptop are: - i7-2620m dual core (2.7 ghz) processor - intel wifi link 1000 bgn wireless card I am having a hard time getting my laptop to connect to the internet through wireless. Ethernet is fine, but at college I need wireless the majority of the time. Can anyone help? Some steps I have done: I have tried WICD while uninstalling the Network Manager. When that didn't work, I uninstalled WICD and reinstalled Network Manager. I an not really sure what else to do.

    Read the article

  • My laptop can not access internet after setup bridge with wired NIC and wireless NIC

    - by Victor S
    I setup a bridge using wired NIC and wireless NIC in order to make wireless NIC as a Wi-Fi AP to share wired internet access, after setup successfully, the Wi-Fi AP works as my expectation, but my laptop can not access internet, please give me a hand. Thanks. My hostapd.conf $ cat hostapd.conf interface=wlan0 bridge=br0 driver=nl80211 ssid=myAP hw_mode=g channel=11 dtim_period=1 rts_threshold=2347 fragm_threshold=2346 macaddr_acl=0 auth_algs=3 ieee80211n=0 wpa=3 wpa_passphrase=PassWord wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP Setup steps: $ sudo killall hostapd hostapd: no process found $ sudo hostapd -B hostapd.conf Configuration file: hostapd.conf Using interface wlan0 with hwaddr 00:26:5e:e8:4f:8e and ssid 'myAP' $ sudo brctl addbr br0 device br0 already exists; can't create bridge with the same name $ sudo ifconfig eth0 0.0.0.0 up $ sudo ifconfig wlan0 0.0.0.0 up $ sudo brctl addif br0 eth0 $ sudo brctl addif br0 wlan0 device wlan0 is already a member of a bridge; can't enslave it to bridge br0. $ sudo ifconfig br0 192.168.1.110 netmask 255.255.255.0 $ sudo route add default gw 192.168.1.1

    Read the article

  • Couldn't pass the signin screen

    - by Amokrane
    I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

    Read the article

  • dpkg stuck downloading font files

    - by Bob Bowles
    I have been reinstalling Ubuntu 12.04. The install from USB works fine, and I could update everything OK, but when I got to re-installing my application software I hit a snag. One of the packages I tried to re-install was ttf-mscorefonts-installer. dpkg stalled during this setup, downloading a font file (it had tried to download it all night). I stopped dpkg, and attempted to re-start downloading something else, but it would not let me. The commands I typed are as follows: bob@bobStudio:~$ sudo rm /var/lib/dpkg/lock This unlocks dpkg, but if I try to do something I get the following message (eg): bob@bobStudio:~$ sudo apt-get install synaptic E: dpgk was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem So, I did just that: bob@bobStudio:~$ sudo dpkg --configure -a whereupon it started the previously failed download all over again. I went round the loop here a few times and each time after the configure command it re-started the failing download, but then I got this: bob@bobStudio:~$ sudo dpkg --configure -a Setting up update-notifier-common (0.119ubuntu8.4) ... ttf-mscorefonts-installer: downloading http://downloads.sourceforge.net/corefonts/andale32.exe Traceback (most recent call last): File "/usr/lib/update-notifier/package-data-downloader", line 234, in process_download_requests dest_file = urllib.urlretrieve(files[i])[0] File "/usr/lib/python2.7/urllib.py", line 93, in urlretrieve return _urlopener.retrieve(url, filename, reporthook, data) File "/usr/lib/python2.7/urllib.py", line 239, in retrieve fp = self.open(url, data) File "/usr/lib/python2.7/urllib.py", line 207, in open return getattr(self, name)(url) File "/usr/lib/python2.7/urllib.py", line 344, in open_http h.endheaders(data) File "/usr/lib/python2.7/httplib.py", line 954, in endheaders self._send_output(message_body) File "/usr/lib/python2.7/httplib.py", line 814, in _send_output self.send(msg) File "/usr/lib/python2.7/httplib.py", line 776, in send self.connect() File "/usr/lib/python2.7/httplib.py", line 757, in connect self.timeout, self.source_address) File "/usr/lib/python2.7/socket.py", line 553, in create_connection for res in getaddrinfo(host, port, 0, SOCK_STREAM): IOError: [Errno socket error] [Errno -2] Name or service not known Setting up ttf-mscorefonts-installer (3.4ubuntu3) ... bob@bobStudio:~$ sudo apt-get update E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/ bob@bobStudio:~$ sudo rm /var/lib/dpkg/lock bob@bobStudio:~$ sudo apt-get update E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/ The good news is that, once I sorted out the file locks, this seems to have permanently aborted the setup of the font package, so at least I can do something else with dpkg. That leaves two questions: 1) How could I have broken the loop without actually crashing out of dpkg? 2) How can I set up the ttf-mscorefonts-installer package in the future? Is this download really broken, or is it 'just' a bad Internet connection?

    Read the article

  • mount network drive

    - by CaptnLenz
    since i updated my ubuntu to natty narwhal(from 10.04), my mount script doesn't work anymore. The scripts mounts a folder from a NAS (WD mybookworld) in the local network to a folder in my home folder. script looked like that: #!/bin/bash sudo mount //192.168.2.222/Public/Shared\ Music/ /home/simon/Musik/ error: mount: wrong fs type, bad option, bad superblock on //192.168.2.222/Public/Shared Music/, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program) Manchmal liefert das Syslog wertvolle Informationen – versuchen Sie dmesg | tail oder so now, because the script doesn't work anymore i decided to add the mount-process to my fstab, because the network drive should be mounted on every startup. My fstab entry looks like this: //192.168.2.222/Public/Shared\ Music/ /home/simon/Musik cifs credentials=/home/simon/.smbcredentials 0 0 But it doesn't work, too. I get a message during the startup process, that Musik couldn't be mounted. Are there any log files i can check for errors? The system is a fresh installed 11.04. Greetings

    Read the article

  • "SASL authentication failed" with mutt and Gmail, why?

    - by hhh
    I am confused by this, I have installed a lot of new pkgs and followed some tutorials after googling but I keep getting this kind of SASL -err. I am not sure whether the mistake is in some Gmail settings or should I check some settings in Ubuntu? I thought this tutorial here would have solved this problem (i am simply trying to set up local mail reading with mutt, using gmail) but I cannot see the instructed things with telnet: "250-STARTTLS 250-AUTH PLAIN LOGIN" so that is why it is not working. $cat .muttrc set imap_user = "[email protected]" set imap_pass = "pass" #set smtp_url = "smtp://[email protected]:465/" set smtp_url = "smtp://[email protected]:587/" set smtp_pass = "pass" set from = "[email protected]" set realname = "name" set folder = "imaps://imap.gmail.com:993" set spoolfile = "+INBOX" set postponed="+[Gmail]/Drafts" set move = no

    Read the article

  • /usr/lib/cups/backend/hp has failed

    - by edtechdev
    Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a pdf from the document viewer (also doesn't work with adobe pdf reader)). Sometimes it fails so bad the printer gives an error saying it needs to be turned off and on again. I can't seem to find a fix anywhere, I've googled all over the past year and tried every fix I could find. It does say that the /usr/lib/cups/backend/hp has failed. It also doesn't make a difference if I create the printer using hp-setup or ubuntu's own printing control panel. I delete and re-create the printer, no difference eventually. I use the default printer settings or custom settings, no difference. I can print perfectly find to a networked printer at home - an HP officejet 6310. It seems to be networked HP printers at work that I can't print to anymore (except occasionally right after re-installing the printer driver). What's the recommended way to install HP printer drivers and reset or clean out everything from before. Or where are the right logs to read or debug commands to do to find out what may be the real cause of the printing problems?

    Read the article

  • "corrupted filesystem tarfile - corrupted package archive" error

    - by Justin
    I was trying to install a program and it said that my dependencies were unmet, and that I should run, sudo apt-get -f install. I have moved everything I didn't need in /etc/apt/sources.list.d/ into the trash. My source.list is all Natty while I am running Oneiric. So maybe I need a new source.list? But here are the things I have: justin@justin-000:~$ sudo apt-get -f install [sudo] password for justin: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-image-3.0.0-13-generic Suggested packages: fdutils linux-doc-3.0.0 linux-source-3.0.0 linux-tools The following NEW packages will be installed: linux-image-3.0.0-13-generic 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. 2 not fully installed or removed. Need to get 0 B/36.5 MB of archives. After this operation, 117 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 270736 files and directories currently installed.) Unpacking linux-image-3.0.0-13-generic (from .../linux-image-3.0.0-13- generic_3.0.0-13.22_i386.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.0.0-13 generic_3.0.0-13.22_i386.deb (--unpack): corrupted filesystem tarfile - corrupted package archive No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic P: Checking for EXTLINUX directory... found. P: Writing config for /boot/vmlinuz-3.0.0-12-generic... P: Writing config for /boot/vmlinuz-2.6.38-11-generic... P: Installing debian theme... done. run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.0.0-13-generic_3.0.0-13.22_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) justin@justin-000:~$ sudo apt-get update justin@justin-000:~$ sudo apt-get update Ign dl.google.com stable InRelease Ign dl.google.com stable InRelease Get:1dl.google.com stable Release.gpg [198 B] Ign us.archive.ubuntu.com oneiric InRelease Ign us.archive.ubuntu.com oneiric-security InRelease Ign http://us.archive.ubuntu.com oneiric-updates InRelease Get:2 dl.google.com stable Release.gpg [198 B] Get:3 dl.google.com stable Release [1,347 B] Get:4 dl.google.com stable Release [1,338 B] Hit us.archive.ubuntu.com oneiric Release.gpg Hit us.archive.ubuntu.com oneiric-security Release.gpg Get:5/dl.google.com stable/main i386 Packages [1,220 B] Hit tp://us.archive.ubuntu.com oneiric-updates Release.gpg Ign tp://dl.google.com stable/main TranslationIndex Get:6 tp://dl.google.com stable/main i386 Packages [464 B] Ign ttp://ppa.launchpad.net oneiric InRelease Hit ttp://us.archive.ubuntu.com oneiric Release Ign ttp://ppa.launchpad.net oneiric InRelease Ign ttp://dl.google.com stable/main TranslationIndex Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-security Release Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-updates Release Hit ttp://us.archive.ubuntu.com oneiric/main Sources Hit ttp://us.archive.ubuntu.com oneiric/restricted Sources Hit ttp://us.archive.ubuntu.com oneiric/universe Sources Hit ttp://us.archive.ubuntu.com oneiric/multiverse Sources Hit ttp://us.archive.ubuntu.com oneiric/main i386 Packages Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/multiverse i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/multiverse TranslationIndex Hit ://us.archive.ubuntu.com oneiric/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric/universe TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/main Sources Hit ttp://us.archive.ubuntu.com oneiric-security/restricted Sources Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric-security/universe Sources Hit tp://us.archive.ubuntu.com oneiric-security/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-security/main i386 Packages Hit tp://us.archive.ubuntu.com oneiric-security/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse i386 Packages Hit htp://ppa.launchpad.net oneiric/main Sources Hit ttp://ppa.launchpad.net oneiric/main i386 Packages Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/universe TranslationIndex Ign htp://dl.google.com stable/main Translation-en_US Hit htp://us.archive.ubuntu.com oneiric-updates/main Sources Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Sources Hit tp://us.archive.ubuntu.com oneiric-updates/universe Sources Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-updates/main i386 Packages Ign htp://dl.google.com stable/main Translation-en Hit ttp://ppa.launchpad.net oneiric/main Sources Hit htp://ppa.launchpad.net oneiric/main i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/restricted i386 Packages Ign htp://dl.google.com stable/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit hp://us.archive.ubuntu.com oneiric-updates/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/multiverse i386 Packages Hit htp://us.archive.ubuntu.com oneiric-updates/main TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/restricted TranslationIndex Ign htp://dl.google.com stable/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/main Translation-en Hit ttp://us.archive.ubuntu.com oneiric/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/main Translation-en Hit hp://us.archive.ubuntu.com oneiric-security/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htt://ppa.launchpad.net oneiric/main Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main Translation-en Fetched 4,765 B in 2s (2,158 B/s) Reading package lists... Done justin@justin-000:~$

    Read the article

  • What is the quickest way to indent a block of text with spaces for use within a web browser?

    - by ændrük
    I occasionally have the need to indent a block of text with spaces for use within a web browser, for example, when formatting a code block on this site or in a post on Launchpad. So far I've just done it by hand by copying four spaces to the clipboard and then mashing keys really fast: ?, Home, Ctrl+V (repeat) What is the quickest way to accomplish this? Copying and pasting to another program? (Which?) A Firefox or Chrome browser extension? A command to directly modify the clipboard contents? An auto-typing program?

    Read the article

  • Permission issues causes Unity Segmentation fault

    - by Dj Gilcrease
    I upgraded from 13.04 to 13.10 and I can boot to the unity-greeter and login just fine, but after login I just get a black screen with a cursor. I have tried following http://help.ubuntu.com/community/BinaryDriverHowto/ATI http://help.ubuntu.com/community/RadeonDriver and the manual install of the downloaded AMD drivers. All have the same affect. Also I have read Black screen after login with cursor I get a black screen after logging in ubuntu 13.04 black screen after login Ubuntu 13.10 - Black screen after login session Ubuntu 13.04 - Black screen with unresponsive cursor Upgrade to Ubuntu 13.04 Problem - Boots into Blank Black Screen All of which were no further help then the two support articles about ATI drivers So I switched back to the default drivers and went a little further into debugging, when I do ctrl+alt+F1 and login and try unity --debug > unity_start.log then ctrl+alt+F8 the screen stays black with a cursor and when I switch back ctrl+alt+F1 the contents of the log output are http://pastebin.com/rdQG4Hb0 However when I try sudo unity --debug > unity_start_root.log then ctrl+alt+F8, unity starts and the output of the log is http://pastebin.com/Yv4RD2j7 The fact that it starts as root tells be it is either a permissions issue of some required file or there is some setting that is specific to my user that is causing the SIGSEGV. So to narrow this down I activated the guest account and tried to login and got the same black screens with only a mouse cursor, so this tells me that it is not a configuration issue, but a permissions issue, so how do I narrow down which file has the wrong permissions? Also is there anything further that may help debug this issue? Ok after a few more hours of googling I found that if I add myself to the video group I can login and see the desktop, but there are lots of other permission related issues, so I am thinking something went wonky with PolicyKit during the upgrade, is there a way to reset PolicyKit settings for a user?

    Read the article

  • keyboard shortcut editor does not intercept keypresses

    - by jpic
    I've been using suckless dwm for years and i really need to make the shortcuts look alike to feel at home ;) On ubuntu oneiric, the keyboard shortcut editor is opened with: system settings - keyboard - shortcuts. The help in the window specifies: 'To edit a shortcut, click the row and hold down the new keys or press backspace to clear' So I select the first row of the 'navigation' section and highlight 'Move window to workspace 1' Then i hold down ctrl+alt+1 for ten seconds but nothing happens. The shortcut still appears as 'disabled'. I'm unable to set any shortcut, i've tried many combinations. For example, a combination with Super key will be intercepted by unity instead of being catched by the keyboard shortcut editor window. Can anybody reproduce this with oneiric ? What am I doing wrong ?

    Read the article

  • I can't add PPA repository behind the proxy (with @ in the username)

    - by kenorb
    I'm trying to add the ppa repository (as a root) with the following command: export HTTP_PROXY="http://[email protected]:[email protected]:8080" add-apt-repository ppa:nilarimogard/webupd8 Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 125, in <module> ppa_info = get_ppa_info_from_lp(user, ppa_name) File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 84, in get_ppa_info_from_lp curl.perform() pycurl.error: (56, 'Received HTTP code 407 from proxy after CONNECT') Unfortunately it doesn't work. Looks like curl is connecting to the proxy, but the proxy says that Authentication is Required. I've tried with .curlrc, http_proxy env instead, but it doesn't work. strace -e network,write -s1000 add-apt-repository ppa:nilarimogard/webupd8 socket(PF_INET6, SOCK_DGRAM, IPPROTO_IP) = 4 socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(8080), sin_addr=inet_addr("165.x.x.232")}, 16) = -1 EINPROGRESS (Operation now in progress) getsockopt(4, SOL_SOCKET, SO_ERROR, [0], [4]) = 0 getpeername(4, {sa_family=AF_INET, sin_port=htons(8080), sin_addr=inet_addr("165.x.x.232")}, [16]) = 0 getsockname(4, {sa_family=AF_INET, sin_port=htons(46025), sin_addr=inet_addr("161.20.75.220")}, [16]) = 0 sendto(4, "CONNECT launchpad.net:443 HTTP/1.1\r\nHost: launchpad.net:443\r\nUser-Agent: PycURL/7.22.0\r\nProxy-Connection: Keep-Alive\r\nAccept: application/json\r\n\r\n", 146, MSG_NOSIGNAL, NULL, 0) = 146 recvfrom(4, "HTTP/1.1 407 Proxy Authentication Required\r\nProxy-Authenticate: BASIC realm=\"proxy\"\r\nCache-Control: no-cache\r\nPragma: no-cache\r\nContent-Type: text/html; charset=utf-8\r\nProxy-Connection: close\r\nSet-Cookie: BCSI-CS-91b9906520151dad=2; Path=/\r\nConnection: close\ Maybe it's because there is @ sign in the username? Wget works with proxy fine. Related: How do I add a repository from behind a proxy? Environment Ubuntu 12.04 curl 7.22.0 (x86_64-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/1.2.3.4 libidn/1.23 librtmp/2.3 curl Features: GSS-Negotiate IDN IPv6 Largefile NTLM NTLM_WB SSL libz TLS-SRP

    Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >