Search Results

Search found 3544 results on 142 pages for 'auth token'.

Page 80/142 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• SSH keys fail for one user

  - by Eli

  I just set up a new Debian server. I disabled root SSH and password auth, so you've gotta use a key file. For my primary user, everything works exactly as expected. I used ssh-keygen -t dsa and got myself a public and private key. Put one in authorized keys, put the other in a pem file locally. I wanted to create a user that I can deploy things with, so I did basically the same process. I addusered it, made a .ssh folder, ran ssh-keygen -t dsa (I also tried RSA), put the keys in their appropriate locations. No luck. I'm getting a Permission denied (publickey) error. When I use the exact same keys as the account that works, same error. When I enable password authentication, I can log in via SSH with the password. How do I debug this?

  Read the article

• VPN authentication and MAC addresses

  - by zakk

  I have to set up a VPN (various clients connecting to a web service on a server, which is also the VPN server) and I want to make sure that no user will share his/her credentials with third parties. I know that this problem is not solvable completely, but I'd want to set up some additional security checks... Some idea I have: 1) An additional check on MAC address, but... are MAC addresses preserved thru VPN? 2) Some kind of extra identification of the client (User Agent, open ports, I want to make sure that is the very same client I authorized). 3) I would like to avoid commercial solutions like a security token... I realize it would be the perfect solution, but it will be to expensive, I suppose... Do you feel that these options are viable? Do you have any other ideas? Thanks in advance for your replies!

  Read the article

• How to protect ejabberd from bruteforce attacks?

  - by Sergey

  It writes this in logs: =INFO REPORT==== 2012-03-14 17:48:54 === I(<0.467.0>:ejabberd_listener:281) : (#Port<0.4384>) Accepted connection {{10,254,239,2},51986} -> {{10,254,239,1},5222} =INFO REPORT==== 2012-03-14 17:48:54 === I(<0.1308.0>:ejabberd_c2s:784) : ({socket_state,tls,{tlssock,#Port<0.4384>,#Port<0.4386>},<0.1307.0>}) Failed authentication for USERNAME =INFO REPORT==== 2012-03-14 17:48:54 === I(<0.1308.0>:ejabberd_c2s:649) : ({socket_state,tls,{tlssock,#Port<0.4384>,#Port<0.4386>},<0.1307.0>}) Failed authentication for USERNAME It doesn't write IP with a failure. And strings "Accepted connection" and "Failed auth.." may even not stand nearby (as I think on heavily loaded servers) to be able to use fail2ban. What to do? And how jabber servers (using ejabberd) are protected?

  Read the article

• How to use nginx PAM module?

  - by Noirello

  I would like to use nginx PAM module to authenticate a site with existing users on a FreeBSD system. I tried to use pam_unix.so, but no luck. It's just not let me in with my usr/psw pair. :( nginx conf: location / { root html; auth_pam "Secure Zone"; auth_pam_service_name "nginx"; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/$fastcgi_script_name; include fastcgi_params; } The nginx file in the /usr/local/etc/pam.d dir:auth required pam_unix.so account required pam_unix.so I would appreciate if someone could tell me a working configuration. :)

  Read the article

• "svn: Cannot negotiate authentication mechanism" for OSX CLI and WinXp TortoiseSVN, but linux CLI works

  - by dacracot

  I had a working subversion server which used the passwd file which stores passwords in clear text. My requirements changed so that passwords now need to be encrypted. I did everything according to the book to use SASL, or so I believe, but now only the linux command line can authenticate. My OSX users, which also use command line, and my WinXp users, which use TortoiseSVN get errors. Linux versions are 1.6.11. OSX versions are 1.6.17. And TortoiseSVN versions are 1.7.4. /opt/subversion/QRpage/conf/svnserve.conf: [general] anon-access = none auth-access = write realm = ABC [sasl] use-sasl = true min-encryption = 128 max-encryption = 256 /etc/sasl2/svn.conf: pwcheck_method: auxprop auxprop_plugin: sasldb sasldb_path: /etc/sasldb2 mech_list: DIGEST-MD5 Then I add new users via: saslpasswd2 -c -f /etc/sasldb2 -u ABC dacracot But for instance OSX users get this error trying to check out: $ svn co svn://svn.nowhere.org/QRpage svn: Cannot negotiate authentication mechanism

  Read the article

• OSX 10.6 Cisco IPSEC strange behavior

  - by tair

  I'm trying to connect to Cisco IPSEC VPN of my company over DSL Internet. I managed to successfully connect using Cisco VPN Client, now I'm trying to switch to OSX 10.6 native client, because of licensing issues. The problems is that the connection fails with a dialog box containing the message: The negotiation with the VPN server failed. Verify the server address and try reconnecting. I checked logs: Jun 29 13:10:39 racoon[4551]: Connecting. Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:10:39 racoon[4551]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:10:42 racoon[4551]: IKE Packet: receive success. (MODE-Config). Jun 29 13:10:42 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface setting (name: u92.168.54.147, subnet: 255.255.255.0, destination: 192.168.54.147). Jun 29 13:10:42 configd[19]: network configuration changed. Jun 29 13:10:42 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:42 named[62]: not listening on any interfaces Jun 29 13:10:58: --- last message repeated 1 time --- Jun 29 13:10:58 configd[19]: SCNCController: Disconnecting. (Connection tried to negotiate for, 16 seconds). Jun 29 13:10:58 racoon[4551]: IKE Packet: transmit success. (Information message). Jun 29 13:10:58 racoon[4551]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Jun 29 13:10:58 racoon[4551]: Disconnecting. (Connection tried to negotiate for, 19.113382 seconds). Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 configd[19]: network configuration changed. Then I opened Terminal, started pinging a server behind VPN, and tried to connect again. Now connection is OK! Logs this time: Jun 29 13:46:53 racoon[8136]: Connecting. Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:46:53 racoon[8136]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (MODE-Config). Jun 29 13:46:56 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface settinaddress: 192.168.54.149, subnet: 255.255.255.0, destination: 192.168.54.149). Jun 29 13:46:56 vmnet-bridge[111]: Dynamic store changed Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 configd[19]: network configuration changed. Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Jun 29 13:46:56 racoon[8136]: Connected. Jun 29 13:46:56 configd[19]: SCNCController: Connected. I tested it several times and it consistently behaves the same. What is the magic?

  Read the article

• Bypass IIS Basic Authentication for localhost

  - by George

  I'd like to have a website authenticated with basic auth, but then also allow the website to access itself locally. That is, I want to allow unauthenticated access only from localhost. In IIS I have only basic authentication enabled (not worrying about SSL for now), and I have the correct file system permissions such that outside users can login successfully and view the website. I have tried setting IIS_IUSR as owner of the directory, and added IUSR with modify permissions, however I'm still getting a 401 error when the website tries to access itself. Anyone have any idea how to get this to work?

  Read the article

• cassandra node discovery

  - by eQuiNoX__

  I just set up a 3 node system with ip addresses "192.168.0.101", "192.168.0.102", "192.168.0.103". I have set the seeds value on the configuration of all three machines as seeds: "192.168.0.101,192.168.0.102,192.168.0.103" However, on running nodetool on any of them, only the 103 machine gets discovered. node101:/opt/cassandra/apache-cassandra-0.8.5/bin# ./nodetool ring -h 192.168.0.101 Address DC Rack Status State Load Owns Token 192.168.0.103 datacenter1 rack1 Up Normal 151.96 KB 100.00% 38174485210079977599903748344879358256 Could someone tell me where the problem lies?

  Read the article

• A specific user is unable to log in to vsftpd

  - by HackToHell

  I am setting up a new user let his name be ftpguy. He has access to only one directory /var/www/xxx. I have already chowned the directory so that he has write and read privileges. The user is also unable to login via ssh as I have disabled that by changing his shell to /sbin/nologin. Also, in vsftpd config, I have enabled the chroot_local_user. Now whenever I log in from ftp, i get an auth error. Connect socket #1008 to xxxxxxxx, port 21... 220 Welcome to blah FTP service. USER ftpguy 331 Please specify the password. PASS ********** 530 Login incorrect. I changed the password to something different several times, using the passwd command, nothing happens, i still the above error. However I am able to log in with my ssh creditals to my ftp server without any problems.(I do not use a key).

  Read the article

• Configuring multiple domain in nginx in one file

  - by user22695

  I am still newbie configuring nginx. Is it posibble to configure multiple domain in one file and they share mostly the same config? For example I want to configure two domains that based from one app and one domain need basic auth, the other doesn't. I would like to do something like this, but I think this does not work: sites-enabled/mysite server { listen 127.0.0.1:80 default_server; server_name www.mysite.com; include sharedconf.conf; } server { listen 127.0.0.1:80; server_name www.mysite.co.jp; auth_basic "restricted"; auth_basic_user_file /etc/nginx.htpasswd; include sharedconf.conf; } sharedconf.conf location / { proxy_pass_header Server; #... bunch of config line ... }

  Read the article

• GlusterFs - high load 90-107% CPU

  - by Sara

  I try and try and try to performance and fix problem with gluster, i try all. I served on gluster webpages, php files, images etc. I have problem after update from 3.3.0 to 3.3.1. I try 3.4 when i think maybe fix it but still the same problem. I temporarily have 1 brick, but before upgrade will be fine. Config: Volume Name: ... Type: Replicate Volume ID: ... Status: Started Number of Bricks: 0 x 2 = 1 Transport-type: tcp Bricks: Brick1: ...:/... Options Reconfigured: cluster.stripe-block-size: 128KB performance.cache-max-file-size: 100MB performance.flush-behind: on performance.io-thread-count: 16 performance.cache-size: 256MB auth.allow: ... performance.cache-refresh-timeout: 5 performance.write-behind-window-size: 1024MB I use fuse, hmm "Maybe the high load is due to the unavailable brick" i think about it, but i cant find information on how to safely change type of volume. Maybe u know how?

  Read the article

• How to debug ssh authentication failures with gssapi-with-mic

  - by Arthur Ulfeldt

  when i ssh to DOMAIN\user@localhosts-name authentication works fine through gssapi-with-mic: debug3: remaining preferred: gssapi,publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug2: we sent a gssapi-with-mic packet, wait for reply debug3: Wrote 112 bytes for a total of 1255 debug1: Delegating credentials debug3: Wrote 2816 bytes for a total of 4071 debug1: Delegating credentials debug3: Wrote 80 bytes for a total of 4151 debug1: Authentication succeeded (gssapi-with-mic). when I connect to a different machine It just seems to stop half way through the gssapi-with-mic authentication: debug1: Next authentication method: gssapi-with-mic debug2: we sent a gssapi-with-mic packet, wait for reply debug3: Wrote 112 bytes for a total of 1255 debug1: Delegating credentials debug3: Wrote 2816 bytes for a total of 4071 <----- ???? debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive How should I go about finding out what happened differently the second time. How can I find out if/why the auth was rejected by kerberos?

  Read the article

• DPMS, keep screen off when lid shut

  - by Evan Teran

  I have a laptop running linux. In my xorg configuration, I have DPMS setup so that the screen automatically turns off during several events. In addition to that I have to the following script tied to ACPI lid open/close events: #!/bin/sh for i in $(pidof X); do CMD=$(ps --no-heading $i) XAUTH="$(echo $CMD | sed -n 's/.*-auth \(.*\)/\1/p')" DISPLAY="$(echo $CMD | sed -n 's/.* \(:[0-9]\) .*/\1/p')" # turn the display off or back on export XAUTHORITY=$XAUTH /usr/bin/xset -display $DISPLAY dpms force $1 done Basically, this script takes one parameter ("on" or "off") then iterates through all of my running X sessions and either turns on or turns off the monitor. Here's my issue. When I close the lid of the laptop, the screen goes off as expected, but if a mouse event occurs (like if something bumps into the table...) then the screen turns back on even though it is closed (I can see the light through the side of the laptop). Is there a way to prevent the screen from turning on during a mouse event if the lid is closed?

  Read the article

• How can i get more user debug logging related to kerberos for alfresco?

  - by Maarten

  I am running alfresco community edition 3.4c on a debian linux. I have problems getting the kerberos authentication in order. The biggest problem is that do not seem to have any sort of user logs. what i am using already: log4j.logger.org.alfresco.web.app.servlet.KerberosAuthenticationFilter=debug log4j.logger.org.alfresco.repo.webdav.auth.KerberosAuthenticationFilter=debug log4j.logger.org.alfresco.smb.protocol=debug log4j.logger.org.alfresco.fileserver=debug I've also checked if the users actually reach the server, and they do, (also on a linux firefox outside of domain, i seem to be able to log in). Can anyone help me get more user logging?

  Read the article

• Connection from Apache to Tomcat via mod_jk not working

  - by Tobias Schittkowski

  I would like to connect apache to tomcat via mod_jk (same machine). The ajp connector in tomcat is listening on port 8009, the worker settings are: worker.worker1.port=8009 worker.worker1.host=localhost However, the connection fails, here is the mod_jk debug log: [debug] wc_get_name_for_type::jk_worker.c (292): Found worker type 'ajp13' [debug] init_ws_service::mod_jk.c (1097): Service protocol=HTTP/1.1 method=GET ssl=false host=(null) addr=127.0.0.1 name=localhost port=80 auth=(null) user=(null) laddr=127.0.0.1 raddr=127.0.0.1 uri=/share [debug] ajp_get_endpoint::jk_ajp_common.c (3154): acquired connection pool slot=0 after 0 retries [debug] ajp_marshal_into_msgb::jk_ajp_common.c (626): ajp marshaling done [debug] ajp_service::jk_ajp_common.c (2449): processing worker1 with 2 retries [debug] ajp_send_request::jk_ajp_common.c (1623): (worker1) all endpoints are disconnected. [debug] jk_open_socket::jk_connect.c (485): socket TCP_NODELAY set to On [debug] jk_open_socket::jk_connect.c (609): trying to connect socket 560 to 0.0.0.0:0 [info] jk_open_socket::jk_connect.c (627): connect to 0.0.0.0:0 failed (errno=47) [info] ajp_connect_to_endpoint::jk_ajp_common.c (995): Failed opening socket to (0.0.0.0:0) (errno=47) Why does mod_jk try to connect to 0.0.0.0:0 and not to 127.0.0.1:8009??? Thank you for your help! Tobias

  Read the article

• How to setup anonymous access in WinSSHD

  - by Shrike

  I have a Windows server (Win2008R2) with WinSSHD installed. I need to allow anonymous access to a particular folder on the server. Actually it's a git repositiory for bower registy but it doesn't matter. I want WinSSHD allow me to connect to an endpoint like "ssh://[email protected]/" I've created a virtual user "bower" with password only auth. No keys. But if I leave empty password then WinSSHD doesn't allow connection with error "Incorrect virtual account password". How to setup a SSH access without any authentication?

  Read the article

• Agent admitted failure to sign using the key.

  - by Delirium tremens

  .ssh dir is chmodded 700, id_rsa.pub 600, id_rsa 400. I ran ssh-keygen -t rsa, imported key to launchpad and ran bzr branch lp:unity, but got error message: Agent admitted failure to sign using the key. Permission denied (publickey). bzr: ERROR: Connection closed: Unexpected end of message. Please check connectivity and permissions, and report a bug if problems persist. auth.log: Nov 28 20:23:13 ubuntu sudo: deltrem : TTY=pts/0 ; PWD=/home/deltrem/Documentos/repositories ; USER=root ; COMMAND=/usr/bin/bzr branch lp:unity Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session opened for user root by (uid=0) Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session closed for user root Nov 28 20:41:04 ubuntu gnome-screensaver-dialog: gkr-pam: unlocked login keyring

  Read the article

• pam_ecryptfs: Error getting passwd (ProFTPD)

  - by Olirav

  proftpd: pam_ecryptfs: Error getting passwd info for user [USERNAME] I am getting this error in the syslog nearly every time any user connects via FTP, the user is able to connect and the session seems to continue without a hitch. ProFTPD.log shows no error, this warning only show in the syslog. My VPS is running Ubuntu 11.10 and Proftpd 1.3.4rc2 from the Ubuntu Repo, I have made only a few changes to the config (no weird auth methods). This has been going on for quite a while but I can't quite find the cause. Anyone got any ideas? EDIT: been looking around but all I can find with this error is the source code for the program itself; it appears to be and error in ecryptfs-utils that only proftpd is triggering.

  Read the article

• Nginx access log shows authenticated user "admin"

  - by bearcat

  I came across a line in my Nginx access log: 218.201.121.99 - admin [12/Dec/2012:18:33:18 +0800] "GET /manager/html HTTP/1.1" 444 0 "-" "-" Let me stress that there is only 1 record with this IP. Notice the authenticated user admin. After some googling, I was able to find out only that this is authenticated user (http://wiki.nginx.org/HttpCoreModule#.24remote_user), which was authenticated by the Auth Basic Module (http://wiki.nginx.org/HttpAuthBasicModule). However, nowhere in my site (configuration) do I use HTTP basic authentication. What is going on? How did it get there? Was the user authenticated?

  Read the article

• Ant trouble with environment variables on Ubuntu

  - by Inaimathi

  Having some trouble with with ant reading environment variables in Ubuntu 9.1. Specifically, the build tasks my company uses has a token like ${env.CATALINA_HOME] in the main build.xml. I set CATALINA_HOME to the correct value in /etc/environment, ~/.pam_environment and (just to be safe) my .bashrc. I can see the correct value when I run printenv from bash, or when I eval (getenv "CATALINA_HOME") in emacs. Ant refuses to build to the correct directory though; instead I get a folder named ${env.CATALINA_HOME} in the same directory as my build.xml. Any idea what's happening there, and/or how to fix it?

  Read the article

• Subversion problem, repo has moved

  - by Rudiger

  Hi, I've set up subversion on a CentOS fresh install. Web view works fine and gives no errors and requests password but when I try and access it through svn client (xcode) it gives the error 175011 (Repository has been moved). I've tried some of the solutions out there but no success. My subversion.conf: <Location /repos> DAV svn SVNParentPath /var/www/html/repos # Limit write permission to list of valid users. # Require SSL connection for password protection. SSLRequireSSL AuthType Basic AuthName "Authorization Realm" AuthUserFile /etc/svn-auth-conf Require valid-user </Location> My Apache DocumentRoot: /var/www/html I've only set up one svn repository so far so there shouldn't be any conflicts there. If you need any more info let me know. Thanks

  Read the article

• Understanding Asterisk Server features

  - by Arham Ali Qureshi

  I need to ask few question about Asterisk 1) Does ACL mean by Access Control list here ?If yes than how could i use it? >ip show user 6001 * Name : 6001 Secret : <Set> MD5Secret : <Not set> Context : DLPN_Admin Language : AMA flags : Unknown Transfer mode: open MaxCallBR : 384 kbps CallingPres : Presentation Allowed, Not Screened Call limit : 2147483647 Callgroup : 1 Pickupgroup : 1 Callerid : "test" <6001> ACL : No Sess-Timers : Accept Sess-Refresh : uas Sess-Expires : 1800 secs Sess-Min-SE : 90 secs RTP Engine : asterisk Codec Order : (ulaw:20,gsm:20) Auto-Framing: No 2) What is mean by "Require Call Token" in Asterisk Digium GIU on Create new User Panel 3) Is There any command from where i can get users VOICE MAIL password ? 4) What AMI or CLI command set call recording on or off for user ? and if i want that file to be stored on client computer not on server memory what could i do ?

  Read the article

• How to add a web folder via command line (Windows)

  - by Ryan

  I am trying to add a web folder via command line in windows. At first I though I should use the "net use" command, but when I tried I kept getting System error 67: C:net use * http://dev.subdomain.domain.tdl/dav/ the user name for 'dev.restech.niu.edu': correctusername the password for dev.restech.niu.edu: System error 67 has occurred. The network name cannot be found. The url I used works in a browser. It's an Apache dav on basic auth LDAP authentication method being used. Here's the thing... I CAN create a web folder when I use the "Add a network place" wizard. When I do net use, I don't see it listed in the prompt that follows. What utility do I need to use to mount a web folder in command line?

  Read the article

• Problem opening XWindows programs with xming and SSH Secure Shell

  - by Brian

  I've installed SSH Secure Shell and xming on my laptop running Windows 7 (64-bit). I'm having trouble starting X Windows applications from the SSH console. I've been able to do it in the past. I've pretty much determined that it's not a server issue because I've tried it on two different servers (both servers are running RHEL 5). Running "echo $DISPLAY" on either server gave me "localhost:10.0". My XLaunch configuration settings are: Multiple Windows, 10 (display number), and Start no client. Once xming has launched, I'll try to execute something like "firefox" and I get this back: The application 'firefox' lost its connection to the display localhost:10.0; most likely the X server was shut down or you killed/destroyed the application. I've already checked to make sure that the X server is running and it is: root 12579 2689 0 Feb14 tty7 00:04:23 /usr/bin/Xorg :0 -br -audit 0 -auth /var/gdm/:0.Xauth -nolisten tcp vt7 Additionally, X11 Tunneling has been enabled in SSH as well as SSH 2 connections.

  Read the article

• Granting rights to the sa account using osql

  - by Jan Jongboom

  I'm installing sql instances through script, and after creating a certain instance, I cannot get the sa account to be enabled through osql. What I've tried osql -S .\INSTANCENAME -E use master ALTER LOGIN sa ENABLE GO Using SSMS to enable the account (by logging in using Windows Auth., 'New query', and exactly the same query as in 1.) Suggestions in this issue No. 2. is actually working; and the account is enabled instantly. No 1 is not working, not even with the suggestions provided in 3., I have restarted the SQL services after executing the commands in osql. Additional info Windows 2003 Server, Microsoft SQL Server 2005 Enterprise, No password policies apply to the account.

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >