Search Results

Search found 3324 results on 133 pages for 'gb j'.

Page 80/133 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

  - by Breadtruck

  So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

  Read the article

• Finding source of leaking active memory on Mac OS Lion

  - by Tim Kemp

  My activity monitor shows 6GB of active RAM usage: Yet my Real Memory column shows nothing like that amount: (There's another screenful below that, all smaller.) Backing that up, the output from this command (which sums up memory usage of every running process): ps -axm -o "rss,comm" | awk 'BEGIN { s=0;}; {s=s+$1;}; END { printf("%.2f GB\n", (s/1024.0/1024));}' Gives 4.09GB, so it looks to me like 2GB has leaked. I see much wider ranges sometimes, perhaps 2 or 3GB from the ps command and as much as 7 or 8GB of Active usage reported by Activity Monitor. I've tried quitting everything and logging my user out and back in again, but the Active usage is still far higher than the RAM reported by ps and by each process to Activity Monitor. This 2GB of active RAM is basically unrecoverable unless I reboot. Is there any way to a) detect what's leaking and b) get it back? Thanks

  Read the article

• Laptop hardware recommendations for multi-platform development

  - by iama

  I am thinking of buying a laptop with the following configuration - Intel core 2 duo(or I3-330M)/ 4GB RAM/300+ GB 7200 RPM. I would like to be able to run two server VMs on this laptop with Win2K8 and Ubuntu (preferably 64 bit editions). Windows 7 will be the Host OS since that is the one that ships with the laptop. I am thinking of using VMWare player to run the two server OSs. Is this laptop good enough to run the two VMs side by side or do I need to go for a better configuration? Any suggestions? Thanks.

  Read the article

• Could not open the dk file

  - by IgnacioRivera

  I dont know what I have done, but it is over a month now that I can not open my virtual machine, I'm using a MacBookPro with Fusion 2.0.6. I recently upgraded my system to Snow Leopard. but it was working fine. Now I get a message that says" File not found: Windox XP. vmdk. I went to all my backups and when I unpack the files in the virtual machine, there is not such a file. the only file that I can see that may contents the data is the .vmem file that show to have 1.2 GB of data. I have tryed and tryed to contact VMware support but it has become an impossible task, If theres someone that could give me some ideas on how to recover my virtual machine????

  Read the article

• linux display drivers

  - by salman

  I've run into a major display problem on newly installed fedora 11, on my 6 years old pc which runs a pentium4 2.4 GHz processor, 1 gb ddr ram, intel 845 motherboard with integrated graphics card. When i open an image or play a video, my complete screen turns garbled. I simply cannot make out whats on my screen. With difficulty i have to close the image/video window and move around the folder window to clean the screen image. Is it because of my display drivers? How can i fix it? I also ran into mp3 plugins and flash issues which i was able to resovle. I'm new to linux, the sole purpose of isntalling it on my old pc was to learn linux but this display problem is frustrating me. Thanks, Salman

  Read the article

• Preparing Automatic Repair appears out of nowhere & takes forever?

  - by Jörg B.

  I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

  Read the article

• Move drive from iomega home media nas to win 7 pc

  - by user41993

  My Iomega Home Media NAS would not boot, so I unscrewed the enclosure and removed the drive out. It's a 500 GB SATA drive that I plugged into my Win 7 PC so that I could backup the data. Windows does recognize it (it's there in disk management) but I can't assign a letter to it in order to access it. The only option available is Delete Volume... which I obviously don't want to do :) How can I accomplish getting the data off that drive? Thanks.

  Read the article

• Move drive from iomega home media nas to win 7 pc

  - by user41993

  My Iomega Home Media NAS would not boot, so I unscrewed the enclosure and removed the drive out. It's a 500 GB SATA drive that I plugged into my Win 7 PC so that I could backup the data. Windows does recognize it (it's there in disk management) but I can't assign a letter to it in order to access it. The only option available is Delete Volume... which I obviously don't want to do :) How can I accomplish getting the data off that drive? Thanks.

  Read the article

• Windows 2003, MySQL 5.0.24, Windows Updates causes problems with MySQL?

  - by Alessandro

  Hi, our Windows 2003 webserver has 2 GB of ram and MySQL v. 5.0.24-community-nt. Maybe due to Windows Updates (is it possible??) I've problems with MySQL databases. I should restart everyday IIS services. Events: "Changed limits: max_open_files: 2048 max_connections: 800 table_cache: 619" "Do you already have another mysqld server running on port: 3306 ?" "Can't connect to MySQL server on 'localhost'" 10055 Should I increase the innodb_buffer_pool_size, from 250M to 500M? Or/and? Thanks

  Read the article

• Determining Performance Limits

  - by JeffV

  I have a number of windows processes that pass messages between them hat a high rate using tcp to local host. Aside from testing on actual hardware how can I assess what my hardware limit will be. These applications are not doing CPU intensive work, mostly decomposing and combining messages, scanning over them for special flag in the data etc.. The message size is typically 3k and the rate is typically ~10k messages per second. ~30MB per second between processing stages. There may be 10 or more stages depending. For this type of application, what should I look to for assessing performance? What do I look for in a server performance wise? I am currently running an XEON L5408 with 32 GB ram. But I am assuming cache is more important than actual ram size as I am barely touching the ram.

  Read the article

• How do I make more available space on a Time Machine hard disk?

  - by Daryl Spitzer

  I upgraded my MacBook Pro to Snow Leopard, and made some other changes that have caused my next Time Machine backup to be quite large. Previous to the upgrade my backup drive had filled up, so Time Machine was deleting old backups to make room for new ones. When Time Machine started the first backup after the upgrade, it displayed a message that it was freeing up space. But it wasn't able to free up enough: (The disk has 320 GB capacity.) How can I free up more space on the disk (without reformatting or deleting all the existing backups)? I don't want to recklessly delete files and take the risk of confusing Time Machine.

  Read the article

• How to convert a MKV video to a less CPU intensive video format?

  - by marco.ragogna

  I have a couple of videos at 1920x800 that use the MKV format (4.7 GB). A friend of mine has an old PC that has some problems playing them; the CPU is working at nearly 100%. Is it possible to convert these videos to a less CPU intensive video format? The final size is not a problem, it can also double or more. Into which format should I convert it and which software for Windows should I use (better if free)? Thank you in advance.

  Read the article

• CentOS Insufficient space in download directory /var/cache/yum/base/packages

  - by Joao Heleno

  Hello! I was trying to yum install libpcap when I got Error Downloading Packages: 14:libpcap-0.9.4-15.el5.i386: Insufficient space in download directory /var/cache/yum/base/packages * free 0 * needed 108 k Here's output from df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda1 20G 19G 0 100% / /dev/sda3 202G 38G 154G 20% /home tmpfs 1.5G 0 1.5G 0% /dev/shm And fdisk -l: Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux I have launched yum clean all with no success clearing up space. Please advise. Thanks.

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• Files hidden on USB hard disk because of virus, how to clean?

  - by hammad

  I have 1 GB hard drive. First all of its contents were gone after a virus got in (when I have the drive to someone else). After research found that it was a virus may be. I run Nortan antivus and removed certain virus. Then ran malewarebytes, now ad-aware and avg 2011 antivirus. Now i could see the files on my other computer. But now I have hooked this to my new macbook pro (windows installation) and i can't see the files. The antivurs does find all the files. MacOSX wrote a 400 MB directory there which i can see but nothing else. How to fix this? Which program will fix it?

  Read the article

• How is memory allocated in ESXi server?

  - by Samselvaprabu

  We have an ESXi 4.1 server with 48 GB RAM. For each VM, we are allocating 4GB of memory. Since the server will have 13 virtual machines, my manager thinks this is wrong. I am going to explain to them that ESXi will actually manage memory itself, but they asked me how much memory I allocated for the ESXi server itself. I did not allocate any (I have not even heard of an option for allocating memory for the ESXi server itself). How is memory allocated for ESXi server? How does it over-allocate/distribute RAM among virtual machines without issue?

  Read the article

• Sharing external storage between different operating systems?

  - by CT

  I just received a Lacie 1TB external usb/firewire/esata drive. I have 2 machines. A macbook running osx 10.6 and a desktop running windows 7. I would like to rip my dvd collection to iso and store on my external. Right now I use my macbook's disk utility to rip dvds to iso. However my desktop is what is connected to my hdtv. I mainly just use the desktop for media. I'd like to format the external with a 200 GB partition for time machine backups and have the rest for storage. DVD iso are often above 8GB so that sort of eliminates FAT file systems correct? Do I have any options to be able to have my mac and pc both see the drive?

  Read the article

• What is the best OS for a server hosting a simple Ruby on Rails based pastebin

  - by Koning Baard XIV

  I have created a simple pastebin in Ruby on Rails and Python. I want to host it in an intranet and it will have like about 1000 users. I want to use one Apache server with a cluster of Mongrel servers. The server itself is a 2 GHz Intel Centrino with 2 GB RAM. What do you think is the best OS to host this? I thought about Damn Small Linux or a custom LFS system. Ubuntu servers come with loads of stuff I don't need. Maybe there are some better OSes? It must be capable of: Running Apache Running Ruby Running Python Running Mongrel with Ruby on Rails SSH Can anyone reccomend me one? Thanks. PS: I am not going to run Windows Server or Mac OS X Server (Mac's are expensive).

  Read the article

• Apache2 memory usage when uploading large files

  - by abhaga

  Hi, I am running apache2.2.12 along with PHP 5.2.10. PHP is configured to run as a separate process through fcgid. The problem is that when users upload a file, size of the apache process swells by almost the same amount. So if somebody tries to upload a 200 MB file, one of the child process swells to current size+200 MB. If 2 users simultaneously start uploading, my server crashes. Now it is the virtual memory size which is increasing but since I am on a OpenVZ based VPS, that is what counts. My questions are: Is it the normal Apache behavior or can I do something to fix this? If not, is there a more memory efficient way of handling big file uploads. Going by the current behavior, I will need 1 GB of free RAM for every apache child accepting a upload. Thanks! Abhaya -

  Read the article

• Most efficient Way to setup a game server

  - by alex bowers

  I'm running a PHP based game which has over 45 Million members predicted for end of this year (2011) Currently we are on 7.5 Million, this game is being ran on facebook and I am in desperate need to help get this game server as efficient and as powerful as possible. it is a dedicated server with Processor Manufacturer Intel Model i7 920 Frequency 4x 2x 2.66 GHz NIC GigaEthernet RAM 12 GB Hard disk 4 x 1 TB specs. It has apache installed, cPanel, phpMyAdmin, several apache mods and MySQL. The game also runs 47 mysql calls per second per user. Is there any alternatives to the above which could be faster, more efficient etc? I dont mind having to recode the game to fit to it, as long as it maximises our upper limit of members on the game. Thanks Also, is there a way to tell what our maximum limit to players, database calls etc is? Thank you again, hope you guys can help :)

  Read the article

• How to move a windows machine properly from RAID 1 to raid 10?

  - by goober

  Goal I would like to add two more hard drives to my current RAID 1 setup and create a RAID 0 setup on top of the two RAID 1 setups (which I believe is referred to as "RAID 10"). Components Involved Intel P68 Chipset Motherboard 4 SATA ports that can be configured for Raid An intel SSD cache that sits in front of the RAID, and a 64 GB SSD configured in that manner Two 1TB HDDs configured in RAID 1 OS: Windows 7 Professional Resources Consulted so far I found a great resource on LinuxQuestions.org for a good "best practices" process for Linux machines, but I'd like to develop a similar process that I know works on Windows Machines.

  Read the article

• How to choose size for a cloud server (rackspace)

  - by Emil

  We're going to test the rackspace cloud next week to see how it's working with our web app. It's a LAMP environment with a lot of MySQL databases. How do I choose the "right" server size? On Rackspace I can choose slices with the memory of 256, 512, 1024, 2048, 4096 etc. Right now we don't have a lot of traffic (approx. 1000 visitors/day) but I thought the whole "cloud" idea was to not be limited and auto scale. Update: What I'm looking for is now a specification of what I need. I know it's too complex. I'm looking for examples, case studies etc. It would be interesting to hear something like "Yes we're serving 10 000 daily requests without spikes on a LAMP stack with only one slice on with 2 GB RAM".

  Read the article

• JVM memory initializazion error after windows update

  - by gianni

  We have three Windows Server 2003 with 2 GB RAM. Server1 tomcat 5.5.25 jvm version SUN 1.6.0_11-b03 Server2 tomcat 5.5.25 jvm version SUN 1.6.0_14-b08 Server3 tomcat 6.0.18 jvm version SUN 1.6.0_14-b08 For the three servers JVM parameters are: -XX:MaxPermSize=256m -Dcatalina.base=C:\Programmi\Apache Group\apache-tomcat-5.5.25 -Dcatalina.home=C:\Programmi\Apache Group\apache-tomcat-5.5.25 -Djava.endorsed.dirs=C:\Programmi\Apache Group\apache-tomcat-5.5.25\common\endorsed -Djava.io.tmpdir=C:\Programmi\Apache Group\apache-tomcat-5.5.25\temp vfprintf -Xms512m -Xmx1024m For some months everithing worked fine. Last friday we installed some windows updates. After the reboot tomcat doesnt start with error: Error occurred during initialization of VM Could not reserve enough space for object heap We reduced the parameter -Xmx1024m to -Xmx768m and now tomcat starts. But we need greater max heap size What happened to our servers ? Thanks in advance.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• Dummy HTTP server for debugging

  - by Andrea

  This is more or less the inverse of my previous question. I need to debug some HTTP requests that I am making. Since these requests arise from the use of some external libraries, sometimes I am not sure of what is the actual data I am sending. Is there some dummy server (for Linux) that accepts HTTP requests and just prints them somewhere so that I can inspect them? I would like to be able to see in plain text the full request, like POST /foo HTTP/1.1 Host: www.example.com Accept: text/xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Language: en-gb,en;q=0.5 Content-Type: text/plain Content-Length: 11 Hello world

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >