Search Results

Search found 26285 results on 1052 pages for 'grant back'.

Page 814/1052 | < Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >

• Windows 7 does not detect my new hard drive?

  - by jasondavis

  I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

  Read the article

• Sharepoint web part fails intermittently

  - by pringly

  I have a MOSS 2007 environment, 2 web servers and a DB server, load balanced between the two web servers. I deployed a web part recently, which worked fine for a while, but failed on web server 2 after a day. When it fails, it gets the error message: 'A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe’ Once it has failed, it will stay that way until an IIS reset is done. The other web server never fails, I tried to force the second web server to fail to recreate the issue and have been unable to do it. I tried placing it under heavy http traffic and it handled it fine. Put it back in the pool and it failed again after about 7 hours. So, if i remove the .dll for the webpart from the affected web server, the webpart doesnt stop working. Is this normal behavior? I checked the bin directory for the site and the global assembly and it there is no other copy of the .dll anywhere else on the server. Also, when checking the web part gallery, if the web part has failed it will appear in the gallery, but by trying to add a new webpart, the .dll wont be listed. I have no idea how to continue troubleshooting from here or even fix it, any ideas?

  Read the article

• Is there a learnable filter in Thunderbird for non-spam messages (as in Opera Mail)?

  - by Debilski

  One feature I like very much about Opera Mail is that you can have learnable filters for any purpose. So not only can you filter spam messages but also messages that your friends sent you or info mails from web platforms without having to enter each and every mail address you want to filter. It actually works quite satisfying and you can combine it with string filtering, too. It does a few mistakes in the beginning but then improves quickly after you have removed some of the false positives. However, there are a couple of drawbacks with the Opera Mail module. The filters are only ‘virtual’. So, with IMAP there is no easy way of mirroring the filtered structure back on the server and when I’m using webmail I’ll see the whole unfiltered mess in the inbox folder. Opera’s not using the OS X address book — and neither does it use ldap (which is not too important for me at the moment). So, I’m not specifically looking for a Thunderbird solution here, a way to fix things in Opera or Apple Mail should do as well. Or some other E-Mail program I don’t even know about yet. (So, to be clear, I’d like to have: OS X Address Book integration, Learnable filters for any type of filtering, Ability to push filtered folder structure to the IMAP server) But I thought like, if it is possible then most probably there would be an add-on for Thunderbird available. Any ideas?

  Read the article

• How do I serve Ruby on Rails applications on Windows Server 2008?

  - by Adam Lassek

  I have spent the last several hours attempting to get Ruby on Rails running on a Windows server with no luck. At first I tried configuring a test application through IIS7's FastCGI support, but the documentation for this is not very good. I've been following this blog entry, and this one, and this one, and this one but everything seems to be missing major steps, or are out of date. And every article keeps linking back to this Howto from rubyonrails.org that doesn't exist. The sense that I'm getting is that even if I manage to make this work, IIS' FastCGI isn't good enough to use in a production environment anyway. So it looks like my best bet is to setup a reverse proxy in IIS that points to Apache & Mongrel/Passenger using ARR and UrlRewrite. Is there anybody else out there stuck deploying a Rails application on a Windows stack? Am I on the right track? Can you give me a better idea of how to configure this? I believe Plesk already installed an instance of Apache/Tomcat running on this server using a different port, so adding another virtual host shouldn't be difficult; the hardest part seems to be setting up the reverse proxy through IIS.

  Read the article

• Why still use JPG compression? [closed]

  - by Torben Gundtofte-Bruun

  Back when the JPG image format was introduced, it made a lot of sense to reduce the file size, even accepting a loss in image quality, because files were being downloaded over a slow and expensive modem connection. In today's world, file size is no longer a concern, at least not regarding JPG where it seems silly to save 45kB on a photo. But my image editing apps still prompt me for the desired compression level when I save a file. Does it still make sense to go with the default 85? Why should I not crank it up to 100 for all files? Update based on comments: For web work, I might use PNG instead. But every smartphone and camera produces JPG files. The question arises when I save these edits. Audience is my own harddisk. We're talking photos, 2-5MB apiece. Chroma, subsampling, DCT - sorry, never heard of it. I'm a home user, not Photoshop guru. For the record, I use Paint Shop Pro on Win, and Gimp on Linux.

  Read the article

• Query specific nameserver for a particular domain upon VPN connect

  - by MT

  Some background: I have a work laptop with Ubuntu 9.10 on it. I have a small network at home where I've been running some basic services (for myself/my family) for 10 some years. In my home network there is a nameserver (Fedora) running Bind 9 with two "views". One view is the "outside" view and it provides name resolution (to the Internet at large) for email, a wiki, and a couple of blogs. The "inside" view provides name resolution (to the internal RFC1918 addresses of theses servers) as well as all the inside hosts, network equipment, ...etc. I connect with an openvpn client to my home network from outside (such as work). What I'd like to be able to do is resolve names on my internal network across this VPN (so I get the RFC1918 "inside" responses) without fully changing my resolver to the DNS server at my hose. For example, if I connect to the VPN from work, I can change my resolver (by editing resolv.conf) to the DNS server at my house (across the VPN) and then successfully resolve all of the inside DNS names on my home network. The issue I have with this is that now I'm no longer able to resolve "inside" names provided by my work's DNS servers (because I'm using my home DNS server). Alternatively, I can connect to the VPN and access my home severs via IP addresses directly, but this is inconvenient and causes issues with Apache name-based hosting (among other things). In the end, the effect I'm trying to achieve is as follows: When I connect to the VPN I automatically start sending DNS requests for *.myhomedomain.com to my home nameserver, but any other requests continue to go the the nameserver I was using before (the one I received on my company LAN via DHCP). When I disconnect the VPN, requests for *.myhomedomain.com go back to the local LAN DNS server (e.g. all requests are going there now). I'm looking for suggestion at to how this can be accomplished.

  Read the article

• How can I restore the registry keys from another C drive? (Windows 7 64bit)

  - by graham3d

  I ran Uniblue registry booster on my system which was working fine. It did a full back up of the registry keys. Now I cannot boot from that disk. I also cannot get into the BIOS! To restore the registry I have to run Uniblue registry booster from within windows. I cannot get there. I can boot up on another C drive, and can see the files on the drive with the problem. Is there any way I can find the Registry Booster backup files and restore it from the other disk? Or find the registry backup and upload it into the registry so I can boot off the other disk again? Or, Can I do a windows repair from the other disk? NB: not getting in to the bios means I cannot boot off the CD/DVD! (I can use the DVD drive from within windows) Any ideas? I do not want to reinstall everything yet again, it takes about 6 hours.

  Read the article

• Laptop does not charge old or new battery with Old and New AC adapters.

  - by Jeff

  My Sager computer has been having a strange issue with the charging. For a long time it would be working perfectly as long as I was active on it. After I'd leave idle for a while it would suddenly decide it didn't want to use AC power anymore and would just discharge the battery until it shutdown because of low battery levels. Was not a huge deal to me since I just sent it to standby when done with it and it worked fine. Recently, however, it would not detect AC power while the battery was in. It ran from the battery just fine but until you powered it down, unplugged the battery, then plugged in the AC adapter it would not be on AC. In addition if I plug the battery back in after it's on AC power, it will see it but the battery won't charge though it can still discharge it. This is OS independent. I tried both a replacement battery and a replacement AC adapter. Neither solved my issue. I'm fairly comfortable opening and servicing a laptop but I don't know where to start. I'd like to avoid replacing my system board if possible. Any Ideas?

  Read the article

• Swapping RAID sets in and out of the same controller

  - by hazymat

  This is a really simple question, and the answer is probably encoded in various wikipedia articles, however my question is reasonably specific, and I need a bulletproof answer! I'm not sure if my question pertains to hardware RAID in general, or to the specific RAID controller I'm working on. Either way it is the Dell SAS 6/iR (this is an LSI sas1068e chipset). I simply want to: remove a set of striped (RAID 0) disks from this RAID controller in a server put in another set of disks, and create a RAID 1 array (or create a new 'virtual disk', as they call it in the SAS 6/iR manual) Do stuff with the new RAID 1 array Have the option of putting back the old set of disks (the RAID 0 striped ones) I am quite sure this is possible, but I need some form of reliable, evidence-based answer as it's for a client of mine, and I need to migrate their data safely. The question: can I actually do the above? Does the RAID configuration get stored on the disks themselves, or in the hardware controller? Is any data stored in the hardware controller? If there is any chance I cannot completely restore operation of the first set of disks I removed, then I need to know about it! The manual alludes to the answer to this question (see page 45 of this document), and talks about activating an array of disks. I just need someone to confirm I can definitely do the above. See, simple question, right? :)

  Read the article

• My scanner isn't responding. It is connected to a SCSI interface using Windows XP

  - by Bob

  I have a Microtek ScanMaker 9600XL scanner. The best part about it is that it is 12x17 inches. Wowza! The worst part about it is that I've had it working at one point, with the same cable, same card, same computer, but have since re-installed Windows XP on it. Currently it will turn on, and blink the Power and Ready lights. They should be solid. I've done my best to find documentation for this, but all I've really gotten is the content on the Microtek site. I've tried turning the scanner on, then the PC. Turning the PC on, then the scanner. When I try launching the software it pops up a dialog saying "ScanWizard Pro can't find any scanners! Use SCSI Check to find a scanner." I know the scanner has a pair of little buttons on the back. These cycle up/down a counter. I think it goes 0-7. Any thoughts on what that does, or how to proceed troubleshooting? I think my next step is to try each of those numbers, and do both pc booted first, and scanner booted first for each of those numbers...

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• strange raid5 issue:

  - by 8steve8

  ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. the screenshot should show that the SNs match, which begs the question why the software doesn't realize the drive is a member of the array: http://img837.imageshack.us/img837/6145/both.png I'd like to know if anyone has experienced anything similar, and what should i do, can i force the drive to be recognized as a member (without wiping data)?

  Read the article

• Un-do Windows disk convert HFS+

  - by BLAKE

  Last night, a friend asked my to give him a copy of a word document. He handed me an external hard drive and left. I plugged the hard drive into my file server running Windows Server 2003, opened disk management and clicked OK. (I know that in Windows 2003 you need to manually assign a drive letter to external drives.) I then looked at the drive in disk management and it said that it was unallocated space. I called my friend and he said that there was data on the drive, but he used it with his Mac Book. Aperantly when I clicked OK in disk management I converted the from HFS+ file system to something else. Is there any way to undo the disk convert? I immediately removed the drive, so there was no writing to it. Windows did not format the drive, it just converted it. Is the data still there? All the data recovery programs I have are for windows, can they read the Mac file system? I need to get the data back, what can I do?

  Read the article

• what are these weird IP address connections in resource monitor?

  - by bill

  I decided to check out Resource Monitor (on the 'Performance' tab in Task Manager, Windows 7) and I noticed in the "Network" section that the 'System' image name kept making a bunch (~5 at a time) of connections to random IP addresses, it would show anywhere from 1-500 bytes/sec 'sent'. They would stay connected for 1-2 minutes. -All web browsers are closed So, first thing I did was run a trace from network-tools.com on some of these IP addresses. 8/10 were outside of US and did not resolve to any host name. Of the 10 IP addresses I traced, 2 were in US, 4 showed origins in China, and one each to Algeria, Russia, Pakistan, Korea. (!) So, the next thing I did was turn off my wireless card, watch the connections disappear, then turn the card back on, and within 30 seconds more random connections were created by System, with different IP addresses from the first time. The next thing I did was go open Task Manager, Show Processes From All Users, then I killed just about everything that wasn't (what appeared to be) a windows process. Turned on wi-fi, and again within 30 seconds, random IP addresses connect for ~ 1 min at a time, new ones coming and going. I occasionally use bit torrent on this machine, but there was definitely no process that seemed related to bt running after I went through task manager, and bt wasn't open to begin with. So, any ideas on what these connections might be for? I have been using Ad-Aware Free and AVG Free on this computer for a while now, always up to date..

  Read the article

• how to export VARs from a subshell to a parent shell?

  - by webwesen

  I have a Korn shell script #!/bin/ksh # set the right ENV case $INPUT in abc) export BIN=${ABC_BIN} ;; def) export BIN=${DEF_BIN} ;; *) export BIN=${BASE_BIN} ;; esac # exit 0 <- bad idea for sourcing the file now these VARs are export'ed only in a subshell, but I want them to be set in my parent shell as well, so when I am at the prompt those vars are still set correctly. I know about . .myscript.sh but is there a way to do it without 'sourcing'? as my users often forget to 'source'. EDIT1: removing the "exit 0" part - this was just me typing without thinking first EDIT2: to add more detail on why do i need this: my developers write code for (for simplicity sake) 2 apps : ABC & DEF. every app is run in production by separate users usrabc and usrdef, hence have setup their $BIN, $CFG, $ORA_HOME, whatever - specific to their apps. so ABC's $BIN = /opt/abc/bin # $ABC_BIN in the above script DEF's $BIN = /opt/def/bin # $DEF_BIN etc. now, on the dev box developers can develop both ABC and DEF at the same time under their own user account 'justin_case', and I make them source the file (above) so that they can switch their ENV var settings back and forth. ($BIN should point to $ABC_BIN at one time and then I need to switch to $BIN=$DEF_BIN) now, the script should also create new sandboxes for parallel development of the same app, etc. this makes me to do it interactively, asking for sandbox name, etc. /home/justin_case/sandbox_abc_beta2 /home/justin_case/sandbox_abc_r1 /home/justin_case/sandbox_def_r1 the other option i have considered is writing aliases and add them to every users' profile alias 'setup_env=. .myscript.sh' and run it with setup_env parameter1 ... parameterX this makes more sense to me now

  Read the article

• How can I tell System Restore in WIndows 7 recovery console to use my recovered backup drive's restore point data?

  - by Rich Shealer

  My Windows 7 desktop PC failed to boot. It would get to a grayish screen with a mouse and would only respond to the power button. After much examination I found that the problem was not a failed drive as running CHKDSK from the Recovery Console on my main drives passed without any errors. I had been installing various Java version in the days before the failure so I decided to use a restore point to roll backwards. I have an external SATA drive controller with two 2 TB drives mirrored using the Windows mirroring function. My system has been backing up to this drive regularly. The problem is I accidently broke the mirror when testing to see if this drive system might have been causing my boot issue. Connecting it to another machine showed two dynamic drives that were invalid. In the end I reformatted one as an NTFS basic disc and used recovery software on the other to copy all of the files to the reformatted drive. I had to copy the restore points into the new drive's System Volume Information folder by granting rights to that user. I moved the drive back to the original machine and rebooted. I can see my new drive, it even uses the same drive letter as it did in normal mode. Running System Restore it lists a new Automatic Restore point created while sitting at the RC along with all of my backups. Selecting the backup I want (or any other) I get a dialog. The backup drive could not be found. System Restore is looking for restore points on your backup. Make sure the backup drive is on and connected to this computer and then click OK. What do I need to do to allow system restore to see the restore points?

  Read the article

• Wires from fan on side panel - where do they connect?

  - by Mick

  The side panel of my desktop PC has a small fan built in. There were two wires, one red one black that connected inside the PC. Unfortunately I had the bolts removed and the side door fell off ripping the cables such that the main length of cable remains attached to the fan. So there must be two short stubs of broken cable somewhere - but I can't find them! Any ideas where I should look? I can't see anything on the motherboard. the PC is running perfectly well - but I now have the side open to make sure the air can circulate. EDIT: The motherboard appears to be an "Asus P6T SE" EDIT: The manual shows the location of two "chassis fan" connectors. One is being used by a big chassis fan on the back face of the PC (underneath the pwer supply). The other appears to be unused - there is no stub of a connector with wires - its just the bare pins sticking directly out of the motherboard. There is also an unused "pwr_fan" connector. Would it be ok to simply connect the black and red wires from the fan to the black and red parts of a molex adapter?

  Read the article

• The Web Hosting Connundrum for "not quite" developers

  - by saltcod

  Hey all, Apologies if this post feels like its been covered elsewhere, but I don't think it has. I've been down a winding web hosting road. To date, I've tried: Joyent, Media Temple, Bluehost, Hostgator, and finally Linode. The reason for switching are likely obvious to everyone: speed. With the exception of the lightening fast Linode, all of the shared hosts are absolutely sloooow. What do do when you're not really a "developer" While I'v grown addicted to the speed of Linode, I really don't feel like its where I should be. I have this nagging feeling in the back of my mind that one of these days (likely soon), I'm going to run into something that i won't be able to figure out and i'll have days worth of downtime. Just the other day, for example, I realized that one of my domains wasn't sending emails. After 4(!) hours looking into the problem, I still can't get sendmail or postfix to work. Four hours!! I want to be a Drupal expert, not a Ubuntu expert That's really the heart of my problem: I spend way too much time learning Ubuntu's ins-and-outs, and not nearly enough time working on Drupal. So here goes: Is there a web host out there anywhere that offers the speed of Linode, but will let me focus on Drupal instead of sys-admin-ing? Thanks! [ I know, I know. There are going to be lots of people who read this saying - "just learn Ubuntu like a real developer". And I get that. I do. But when I work full-time and try and develop some of these sites in my evenings and weekends, I'm really feeling like the sys-admin stuff gets in the way.

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• Reread partition table without rebooting?

  - by Teddy

  Sometimes, when resizing or otherwise mucking about with partitions on a disk, cfdisk will say: Wrote partition table, but re-read table failed. Reboot to update table. (This also happens with other partitioning tools, so I'm thinking this is a Linux issue rather than a cfdisk issue.) Why is this, and why does it only happens sometimes, and what can I do to avoid it? Note: Please assume that none of the partitions I am actually editing are opened, mounted or otherwise in use. Update: cfdisk uses ioctl(fd, BLKRRPART, NULL) to tell Linux to reread the partition table. Two of the other tools recommended so far (hdparm -z DEVICE, sfdisk -R DEVICE) does exactly the same thing. The partprobe DEVICE command, on the other hand, seems to use a new ioctl called BLKPG, which might be better; I don't know. (It also falls back on BLKRRPART if BLKPG fails.) BLKPG seems to be a "this partition has changed; here is the new size" operation, and it looked like partprobe called it individually on all the partitions on the device passed, so it should work if the individual partitions are unused. However, I have not had the opportunity to try it.

  Read the article

• HSphere - Only sees Apache 2 Test Page after forced shutdown?

  - by Darkwoof

  Hi, I have a dedicated server running on a Dell PowerEdge 850 with CentOS 4.4 and HSphere 3.0 Patch 6 colocated at a datacenter. Last night my hosting company had to schedule a change in the power bar, and I gave the go ahead for them to shut down the server and bring it up when they are done. Since they do not have admin access to the machine, I suppose they did a forced shutdown. When the machine was brought up, I found that all my domains (and sub-domains) are now pointing to an "Apache 2 Test Page" instead of the pre-configured sites that were running prior to the shutdown. This apparently only affects the standard sites running on port 80 - my Webmin instance running at port 1000 is still accessible for example, as well as my HSphere control panel running at port 8080. I've checked the config settings using the HSphere UI for each of the sites, and didn't find anything wrong. I've also tried rebooting the server via SSH, which does not rectify the problem. I've previously done reboots with no issues; the sites would just come right back up when its done, but not this time. I'm guessing some configuration file got corrupted or overwritten this time? Anyone with experience with HSphere and can provide some advice on what's happened and how to solve it? Thanks. (I do not have an active support agreeement for HSphere since Parallels took over and increased the min. license to 200. I only had 25 license for use by family and friends.) Thanks in advance.

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• Linux that restores itself on each reboot

  - by jettero

  I'm looking for methods and software to help create a variant of lubuntu that will restore itself to an install state and/or update on every boot. I'm thinking of doing things like putting the root filesystem on a squashfs and using unionfs and tmpfs to make root writable, but automagically restorable. I'm thinking of updating the squashfs with rsync. Perhaps there are other ways to approach the problem. Perhaps root needn't be writable at all. All thoughts welcome. The home dir would be writable in the usual way. The goal, if it matters, is a Linux that's simple to maintain from the home office, but that functions correctly for customers. We have some custom software that we wish for customers to be able to run trivially on equipment we provide. Ideally these devices would have a "restore to factory" function that would put it back the way we intended. If this is part of the normal boot cycle, so much the better. Why lubuntu? Personal preference for this application. It has a usable desktop, but doesn't take up much ram.

  Read the article

• Applications are being opened by IE instead of running normally

  - by Star

  I rewrote the Question to add everything that i tried so far. Many of my applications are being opened by Internet Explorer. (not all) For example when I run Firefox.exe (from shortcut) I get IE run instead, with the following URL http: // %22d/ Browser/firefox.exe%22 (I added spaces to prevent link creation) the shortcut target is: "D:\Browser\firefox.exe" when I attempted to open firefox.exe from it's folder the results were the same as the previous one I attempted to open it by cmd, so i navigated with cmd to the FF path then wrote: firefox.exe the was the same except that the URL was: http: // Firefox.exe/ when i jsut write firefox the result URL was: http: // Firefox/ (is it some kind of parameter or something??) trying the same with chrome resulted the same results as the previous tests. I tried creating a new user (adminstartor) but the problem still there. I tried every registry key with exe on it (not sure if i tried them all) no change I tried removing IE but came back by itself somehow, meanwhile IE is removed, FF and its fellow apps gave me open with window I tried reinstalling the applications but it just no use. Time Line: (as requested from @Daredev) I don't know when it happened because the computer is for the company i work for and it was like that since i got it. (The IT there gave up on the problem lon time ago!). applications were installed already are "firefox" and "XPS viewer" . applications were working after the problem everything except what uses browsing (MS help viewer, XPS viewer, firefox-even I've re installed it-, opera, chrome) that what I thought but after installing Maxthon , comodoDragon this theory was blown away. system info: 1- windows xp professional service pack 3 2- system fully patched: Yes 3- anti-virus up to date: Yes 4- same behavior when booting into safe mode: Yes

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

< Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >